Double plating is associated with higher fixation strength than single plating in osteoporotic fractures of the scapular spine: a biomechanical study.

INTRODUCTION: The number of atraumatic stress fractures of the scapular spine associated with reverse shoulder arthroplasty is increasing. At present, there is no consensus regarding the optimal treatment strategy. Due to the already weakened bone, fractures of the scapular spine require a high fixation stability. Higher fixation strength may be achieved by double plating. The aim of this study was to evaluate the biomechanical principles of double plating in comparison to single plating for scapular spine fractures. METHODS: In this study, eight pairs (n = 16) of human shoulders were randomised pairwise into two groups. After an osteotomy at the level of the spinoglenoid notch, one side of each pair received fracture fixation with a single 3.5 LCP (Locking Compression Plate) plate. The contralateral scapular spine was fixed with a 3.5 LCP and an additional 2.7 LCP plate in 90-90 configuration. The biomechanical test protocol consisted of 700 cycles of dynamic loading and a load-to-failure test with a servohydraulic testing machine. Failure was defined as macroscopic catastrophic failure (screw cut-out, plate breakage). The focus was set on the results of specimens with osteoporotic bone quality. RESULTS: In specimens with an osteoporotic bone mineral density (BMD; n = 12), the mean failure load was significantly higher for the double plate group compared to single plating (471 N vs. 328 N; p = 0.029). Analysis of all specimens (n = 16) including four specimens without osteoporotic BMD revealed no significant differences regarding stiffness and failure load (p > 0.05). CONCLUSION: Double plating may provide higher fixation strength in osteoporotic bone in comparison to a single plate alone. This finding is of particular relevance for fixation of scapular spine fractures following reverse shoulder arthroplasty. LEVEL OF EVIDENCE: Controlled laboratory study.

Clinical Outcomes of Single Versus Double Plating in Distal-Third Humeral Fractures Caused by Arm Wrestling: A Retrospective Analysis.

Background and Objectives: Arm wrestling is a simple and popular activity among young people that causes distal-third humeral fractures. However, injury to the young population may cause economic loss; therefore, they need to return to work as soon as possible. Accordingly, we aimed to compare radiological and functional outcomes of distal-third humeral fractures caused by arm wrestling treated with double and single plating. Materials and Methods: Thirty-four patients with distal-third humeral fractures caused by arm wrestling were treated between January 2015 and January 2021. They were separated into double- and single-plating groups and treated using a triceps-sparing approach. Regular follow-up was performed to evaluate elbow functionality, range of motion, bone union, and complications; the American Shoulder and Elbow Surgeons score was used for functional assessment. Results: Patients treated with single plating exhibited union rate, union time, and elbow range of motion similar to those of patients treated with double plating; however, they exhibited better pain and functional outcomes (American Shoulder and Elbow Surgeons score) at 2 weeks, 1 month, and 3 months postoperatively (84.50 ± 5.01 vs. 61.70 ± 12.53 at 2 weeks, 96.20 ± 2.63 vs. 84.25 ± 14.56 at 1 month, and 100.00 vs. 94.76 ± 9.71 at 3 months, p < 0.05). The two groups exhibited no significant differences after 1 year (100.00 vs. 98.54 ± 3.99, p < 0.13). The overall complication rate was significantly higher in patients treated with double plating than in those treated with single plating (18.75% vs. 5.56%). Radial nerve palsy was observed in patients in both groups. Conclusions: In patients with distal-third humeral fractures caused by arm wrestling, single plating provides a union rate and elbow range of motion similar to those of double plating, with significantly fewer complications and lower surgical time and blood loss with improved early functional outcomes.

Single lateral versus medial and lateral plates for treating displaced scapular body fractures: a retrospective comparative study.

BACKGROUND: This study compared the outcomes and complications of single lateral plating vs. dual plating for treating displaced scapular body fractures. METHODS: Open reduction and internal fixation using locking plates was performed in 45 patients with displaced scapular fractures. A single lateral plate fixed in the lateral border was used in 22 patients (group A), and dual plates fixed in both the lateral and medial borders were used in 23 (group B). RESULTS: The average follow-up duration in both groups was 20 months. A remarkable difference was seen between the 2 groups in mean operative time and blood loss, although the Disabilities of the Arm, Shoulder and Hand and Constant Shoulder scores at the final follow-up were similar. The prominence rate of the hardware was 27.3% (6 of 22) in group A and 65.2% (15 of 23) in group B. The plate removal rate was 31.8% (7 of 22) in group A and 78.3% (18 of 23) in group B. CONCLUSIONS: Open reduction using a single plate on the lateral border for treating displaced scapular body fractures can lead to good functional outcomes, shorter operative time, less blood loss, and fewer plate-related complications compared with the dual-plating technique.

Plate fixation of the anterior pelvic ring in patients with fragility fractures of the pelvis.

INTRODUCTION: In fragility fractures of the pelvis (FFP), fractures of the posterior pelvic ring are nearly always combined with fractures of the anterior pelvic ring. When a surgical stabilization of the posterior pelvis is performed, a stabilization of the anterior pelvis is recommended as well. In this study, we aim at finding out whether conventional plate osteosynthesis is a valid option in patients with osteoporotic bone. MATERIALS AND METHODS: We retrospectively reviewed medical charts and radiographs of all patients with a FFP, who underwent a plate osteosynthesis of the anterior pelvic ring between 2009 and 2019. Patient demographics, fracture characteristics, properties of the osteosynthesis, complications and revision surgeries were documented. Single plate osteosynthesis (SPO) at the pelvic brim was compared with double plate osteosynthesis (DPO) with one plate at the pelvic brim and one plate anteriorly. We hypothesized that the number and severity of screw loosening (SL) or plate breakage in DPO are lower than in SPO. RESULTS: 48 patients with a mean age of 76.8 years were reviewed. In 37 cases, SPO was performed, in 11 cases DPO. Eight out of 11 DPO were performed in patients with FFP type III or FFP type IV. We performed significantly more DPO when the instability was located at the level of the pubic symphysis (p = 0.025). More patients with a chronic FFP (surgery more than one month after diagnosis) were treated with DPO (p = 0.07). Infra-acetabular screws were more often inserted in DPO (p = 0.056). Screw loosening (SL) was seen in the superior plate in 45% of patients. There was no SL in the anterior plate. There was SL in 19 of 37 patients with SPO and in 3 of 11 patients with DPO (p = 0.16). SL was localized near to the pubic symphysis in 19 of 22 patients after SPO and in all three patients after DPO. There was no SL in DPO within the first month postoperatively. We performed revision osteosynthesis in six patients (6/48), all belonged to the SPO group (6/37). The presence of a bone defect, unilateral or bilateral anterior pelvic ring fracture, post-operative weight-bearing restrictions, osteosynthesis of the posterior pelvic ring, and the presence of infra- or supra-acetabular screws did not significantly influence screw loosening in SPO or DPO. CONCLUSION: There is a high rate of SL in plate fixation of the anterior pelvic ring in FFP. In the vast majority, SL is located near to the pubic symphysis. DPO is associated with a lower rate of SL, less severe SL and a later onset of SL. Revision surgery is less likely in DPO. In FFP, we recommend DPO instead of SPO for fixation of fractures of the anterior pelvic ring, which are located in or near to the pubic symphysis.

Complications associated with open reduction and internal fixation for adult distal humerus fractures: a multicenter retrospective study.

BACKGROUND: Open reduction and plate fixation are the preferred treatment options for most distal humerus fractures in adults. However, it is often challenging for orthopedic surgeons because of the complex anatomy and the difficulty in achieving stable fixation. This multicenter study aimed to analyze the complication types and rates of patients with distal humerus fractures treated with open reduction and plate fixation, and compare the results with those found in the literature. In addition, we describe the clinical outcomes. METHODS: This retrospective multicenter study was conducted between September 2001 and March 2021 and included data from four hospitals. In total, 349 elbows underwent surgical treatment at these hospitals during the study period. Patients > 17 years of age who were treated by plate fixation were included, and patients who were treated by other fixation methods were excluded. A total of 170 patients were included in the study. The following types of complications were investigated: (1) nerve related; (2) fixation and instrument related; (3) osteosynthesis related; (4) infection; and (5) others. RESULTS: The following complications were found: (1) 26 (15.3%) cases of postoperative ulnar nerve symptoms; 4 (2.4%) of postoperative radial nerve symptoms; (2) one (0.6%) case of screw joint penetration and screw loosening; and eight (4.7%) cases of hardware removal due to instrument skin irritation; (3) seven (4.1%) cases of nonunion; (4) two (1.2%) and four (2.2%) cases of superficial and deep infection, respectively, and seven (3.9%) cases of wound complication; and (5) 37 (21.8%) cases of heterotrophic ossification, 79 (46.5%) cases of elbow stiffness (did not achieve functional range of motion [ROM]), and 41 (24.1%) cases of osteoarthritis over Broberg and Morrey Grade I. Paradoxically, the postoperative ulnar nerve symptoms were more frequent in the prophylactic ulnar nerve anterior transposition group. However, this difference was not statistically significant (p = 0.086). The mean ROM was 123.5° flexion to 9.5° extension. The average Disabilities of the Arm, Shoulder and Hand (DASH) score was 14.5 ± 15.6. CONCLUSIONS: Open reduction and plate fixation for distal humeral fractures is a reasonable treatment option with acceptable complication rates and favorable clinical outcomes. Surgeons must be vigilant about ulnar nerve complications. Level of Evidence Therapeutic Level III.

Comparison of Single-Plate and Double-Plate Osteosynthesis with Locking Plate Fixation for Distal Humeral Fracture in Older Adults.

BACKGROUND: Management of transcondylar fracture of the humerus in older adults remains a challenging issue in trauma surgery. Both single- and double-plate fixation are used, and the best procedure is yet to be determined. This retrospective study evaluated and compared the clinical and radiological outcomes of single- and double-plate fixation for transcondylar humeral fracture. METHODS: This study included older adults (age >65 years) with transcondylar fractures of the humerus (AO/OTA 13A2-3; transverse, transmetaphyseal fracture) treated at our hospital between 2002 and 2019. The patients were divided into two groups based on the fixation procedures they underwent, namely, single (group S) or double (group D) locking plate osteosynthesis. Postoperative outcomes were investigated. RESULTS: Group S and group D comprised 11 (11 women) and 17 (2 men; 15 women) patients, respectively. In group S, the elbow was immobilized in a long-arm cast or splints for 2 weeks to prevent early displacement of fracture. Residual numbness of the ulnar digits was observed in two patients in group S and in nine patients in group D. No significant difference was noted between the two groups in the ratio of loss of reduction, loosening of the medial screw, ulnar nerve disturbance, or clinical outcomes. The ratio of elbow contracture significantly differed between 2 groups. The elbow flexion angle was significantly lower in group S. CONCLUSIONS: Open reduction and internal fixation with a double plate appears to be the optimal choice for early postoperative mobilization and maintenance of flexion and arc of the elbow joint.

Management of comminuted mid-shaft clavicular fractures: Comparison between dual-plate fixation treatment and single-plate fixation.

BACKGROUND: We consider dual-plate fixation to improve construct rigidity in cases with fracture complexity. The purpose of this study is to compare the rate of nonunion, prognosis, and complications at 6-12 months for surgically treated acute mid-shaft clavicle fractures when extra-periosteal dual-plate fixation is used in place of the conventional single-plate fixation. MATERIALS AND METHODS: The comparative study was conducted on 47 patients who received acute mid-shaft clavicular fracture treatment in our hospital from March 2015 to July 2018. All patients were divided into dual-plate fixation treatment (group A) and single-plate fixation (group B). Patients undergoing single-plate fixation were compared to dual-plate fixation. Patients were followed up for 6-12 months. Charts were reviewed to assess union rates, prognosis, and complications. RESULTS: Forty-seven clavicles (30 single plates and 17 dual plates) were evaluated. All patients (100%) in dual plating group and 128 (93.3%) in single plating group obtained bony union by 1 year. When comparing groups at 3 months, radiographic union was present in 50.0% of single plates and 64.7% in the dual plating group (p = 0.032). However, at 6 months, no significant difference existed (90.0% vs. 94.1%, p = 0.297). Comparing groups at 1.5 and 6 months, Constant-Murley outcome scores were present with no significant difference (p = 0.129, p = 0.054) between single plates and dual plating group. However, at 3 months, significance difference existed. DISCUSSION: Three months after the operation, patients with dual-plate fixation showed good functional recovery. Extra-periosteal dual plating for acute mid-shaft clavicle fractures can be safely considered for the treatment of complex acute mid-shaft clavicle fractures without increasing the risk of nonunion or revision. CONCLUSIONS: Open reduction and internal fixation with an extra-periosteal dual plating technique is a reliable option for treatment of acute mid-shaft clavicle fractures, especially in the setting of severely comminuted fractures and in situations where bone quality is questionable and additional fixation is desired.

Finite element analysis of dual small plate fixation and single plate fixation for treatment of midshaft clavicle fractures.

BACKGROUND: Midshaft clavicle fractures are one of the most familiar fractures. And, dual small plate fixation has been reported as can minimize hardware-related complications. However, the biomechanical properties of the dual small plate fixation have not yet been thoroughly evaluated. Here, we report the results of a finite element analysis of the biomechanical properties of midshaft clavicle fractures treated with dual small plating and superior and anteroinferior single plate fixation. METHODS: A three-dimensional (3D) finite element model of the midshaft clavicle fractures was created, whose 4-mm transverse fracture gap, having an angle < 30 degree and devoid of overlapping triangles, was simulated between the fractured segments of the middle-shaft of the clavicle. The equivalent von Mises stress and displacement of the model was used as the output measures for analysis. RESULTS: No significant differences were found between dual plating, superior or anteroinferior single plating in cantilever bending, axial compression, and axial torsion. Dual plating with a smaller plate-screw construct is biomechanically eligible to compare with superior and anteroinferior single plate fixation using larger plate-screw constructs. CONCLUSIONS: This study demonstrated that larger plate-screw constructs for the treatment of simple are placed clavicular fractures; however, weight-bearing and exorbitant shoulder activity should be avoided after the operation. Therefore, dual plating may provide a viable option for fixing midshaft clavicle fractures and, thus, may be preferred for patients who need early activity.

A non-destructive single plate method for measurement of thermal resistance of polymer sheets and fabrics.

Measurement of thermal resistance of polymer sheets and fibrous layers is important in various applications including those within the engineering, ergonomics, clothing design and personal protective equipment fields. Standard methods for measurement of thermal resistance of plain materials are generally time consuming, expensive and often require the sample to be cut. Moreover, the temperature difference between the surfaces of both plates surrounding the sample must be known, as well as the sample thickness. This article describes a new measuring device named the Thermoscope. The Thermoscope is not limited by the aforementioned requirements and is able to evaluate the thermal resistance of polymer sheets and textiles by touching the sample on one surface alone. Simultaneously, the other surface is kept in thermal contact with the supporting base. The accuracy of this device was compared with the Alambeta thermal insulation tester. Effects of various base materials on measurement precision were also studied.

A biomechanical comparison of two plating techniques in lateral clavicle fractures.

BACKGROUND: Neer Type IIb lateral clavicle fractures typically lead to dislocation of the medial fragment. Therefore, most surgeons recommend surgical treatment for such a fracture pattern. The use of a locking compression plate with a lateral extension has produced satisfactory results in various studies over recent years. Double-plate fixation is a common technique in the treatment of complex distal radius fractures. The authors use this technique as a routine procedure in the treatment of Neer type IIb fractures. In this biomechanical testing study, the mechanical properties of the two techniques were compared. METHODS: On 20 clavicles from fresh frozen cadavers a Neer Type IIb fracture-like osteotomy was performed. A cyclic loading test followed by a load-to-failure test was carried out. Parameters for statistical evaluation were the stiffness at cycles 1, 100 and 17,500 as well as the ultimate tensile load and the deformation at the point of failure. FINDINGS: All specimens withstood the cyclic loading test without any noticeable damage. At cycles 100 and 17,500, the double-plate technique was less stiff. Failure loads were not significantly different from each other, but deformation at the point of failure was significantly greater for the double-plate technique. INTERPRETATION: Both techniques provided sufficient fixation to the fracture site to endure the cyclic loading test, which is supposed to simulate an incident-free week postoperatively. In summary, the double-plate technique offers biomechanically a feasible alternative to the single-plate technique in lateral clavicle fractures of Neer Type IIb.

Lateral Locked Plating or Dual Plating: A Comparison of Two Methods in Simple Bicondylar Tibial Plateau Fractures.

BACKGROUND: In this study, our aim was to compare the results of the dual locking plate fixation technique and lateral locking plate fixation technique for tibial bicondylar plateau fractures without posteromedial fragment. METHODS: We evaluated 20 patients who underwent surgical treatment due to bicondylar tibial plateau fracture between 2010 and 2015. Ten patients were included in group 1, in which a dual locking plate was employed, whereas 10 patients were included in group 2, in which a lateral locking plate was used. In both groups, functional and clinical outcomes after treatment were rated according to the Knee Society Knee Scoring System, Rasmussen functional score, and Rasmussen radiological score. RESULTS: The mean follow-up time was 24 months. There were no significant differences between the groups with respect to functional and radiographic outcomes at the final follow-up. CONCLUSIONS: In bicondylar tibial plateau fractures without posteromedial fragment, the lateral locking plate fixation technique showed the similar clinical and radiological outcomes as the dual locking plate fixation technique.

Comparison of 2 plating techniques for lateral clavicle fractures, using a new standardized biomechanical testing setup.

BACKGROUND: Conservative treatment of lateral clavicle fractures (Neer type II) often ends with unsatisfactory results for patients. Operative treatment is thus gaining acceptance. A retrospective study found success using a double plate technique for these injuries. For the current study, a standardized testing setup was developed to compare the mechanical properties of single versus double plate technique for lateral clavicle fractures. METHODS: Six synthetic bones were tested for each technique. Neer type IIB fractures were created using computer-aided design (CAD). Fatigue testing was carried out with a cantilever bending test. Parameters measured were cycles undergone, failure load and stiffness at the point of failure. RESULTS: The standardized testing setup was able to provide reproducible failures. The double plate technique lasted about 16,000 more cycles and withstood an additional 22.4 N on average. CONCLUSIONS: The new modified standardized testing setup produced reproducible fixation failures for both clavicle fracture fixation techniques. The double plate technique seems to be mechanically superior to the single plate technique.

Complex tibial plateau fractures: a retrospective study and proposal of treatment algorithm.

INTRODUCTION: Complex tibial plateau fractures are characterized by compression and sinking of one or both the articular surfaces. In this study, we evaluated clinical and radiological outcomes in patients with 41.C1,41.C2,41.C3 fractures according to AO classification. We also provide a specific therapeutic algorithm for each type of fracture. MATERIAL AND METHODS: The study was conducted in 43 patients who underwent surgical treatment for complex tibial plateau fractures and were followed for a minimum of 12 months. Outcome measures included: range of motion (ROM) recovery, Short Form 36 Health Survey (SF36), Knee injury and Osteoarthritis Outcome Score (KOOS), tibial plateau angle (TPA), and posterior angle (PA). RESULTS: Analyses were performed in 38 patients after excluding 5 cases because of missing imaging evaluations at follow-up. All patients showed good quality of life in all areas considered by SF36 and KOOS as well as satisfactory recovery of ROM. Average TPA and PA values were 87.9° and 0.6°, respectively. DISCUSSION: In complex tibial plateau fractures, surgical treatment is instrumental to obtain full restoration of the joint surface and fast functional recovery. Results are highly related to the type of treatment adopted for different kinds of fracture. In our case series, the best results were obtained when 41.C1 fractures were treated with a single plate. In 41.C2 fractures, clinical and imaging outcomes were independent of the number of plates used. In contrast, in 41.C3 fractures, optimal results were achieved with double plates. CONCLUSIONS: Based on our findings, as also supported by the literature, 41.C1 fractures should be treated with single plate, which reduces the surgical time, soft tissue damage and infection risk. On the other hand, 41.C3 fractures have best outcomes in stability, consolidation and recovery time when treated with double plate.

Optimization of single plate-serial dilution spotting (SP-SDS) with sample anchoring as an assured method for bacterial and yeast cfu enumeration and single colony isolation from diverse samples.

We propose a simple technique for bacterial and yeast cfu estimations from diverse samples with no prior idea of viable counts, designated as single plate-serial dilution spotting (SP-SDS) with the prime recommendation of sample anchoring (100 stocks). For pure cultures, serial dilutions were prepared from 0.1 OD (100) stock and 20 µl aliquots of six dilutions (101-106) were applied as 10-15 micro-drops in six sectors over agar-gelled medium in 9-cm plates. For liquid samples 100-105 dilutions, and for colloidal suspensions and solid samples (10% w/v), 101-106 dilutions were used. Following incubation, at least one dilution level yielded 6-60 cfu per sector comparable to the standard method involving 100 µl samples. Tested on diverse bacteria, composite samples and Saccharomyces cerevisiae, SP-SDS offered wider applicability over alternative methods like drop-plating and track-dilution for cfu estimation, single colony isolation and culture purity testing, particularly suiting low resource settings.

Comparison of the curative effects of three fixed methods in the management of distal humeral fractures in adults / 中国基层医药

Objective To compare the curative effects of three fixed methods in the management of distal humeral fractures in adults.Methods From January 2012 to December 2015,120 adults patients with distal humeral fractures admitted to our hospital were enrolled in this prospectively study.According to the principle of random digital table,all patients were randomly signed into single plate fixation group,Y type plate fixation group or double plates fixation group.The primary outcomes included surgical approach,elbow function recovery and postoperative complica-tions.Results Significantly differences were observed among the three groups in fracture union time[(99.48 ± 11.81)d vs.(108.93 ±11.05)d vs.(111.35 ±11.11)d,F =12.274,P =0.000)];there was no difference in fracture union time between the single plate fixation group and Y type plate fixation group (t =0.979,P =0.331). However,patients in double plates fixation group got a significantly shorter fracture union time when compared with the single plate fixation group or Y type plate fixation group (t =3.696,4.632,both P =0.000).Significantly differences were observed among the three groups in Mayo elbow performance score three months after the operation[(88.63 ±7.35)points vs.(79.98 ±6.06)points vs.(79.60 ±6.5)points,F =12.274,P =0.000)].There was no difference in Mayo elbow performance score between the single plate fixation group and Y type plate fixation group (t =0.266, P =0.791).However,the patients in the double plates fixation group got a significantly higher Mayo elbow perform-ance score (t =5.742,5.799,both P =0.000).There was no difference among the three groups in operation duration,intraoperative bleeding volume,failure rate of internal fixation,surgical site infection,ulnar neuritis,myositis ossificans and loosening of the plate (all P >0.05).Conclusion Double plates is more in line with the biomechanical characteristics of the distal humerus,and it is beneficial to the functional recovery of elbow joint.