Burkholderia cenocepacia BCAM2418-induced antibody inhibits bacterial adhesion, confers protection to infection and enables identification of host glycans as adhesin targets.

Trimeric Autotransporter Adhesins (TAA) found in Gram-negative bacteria play a key role in virulence. This is the case of Burkholderia cepacia complex (Bcc), a group of related bacteria able to cause infections in patients with cystic fibrosis. These bacteria use TAAs, among other virulence factors, to bind to host protein receptors and their carbohydrate ligands. Blocking such contacts is an attractive approach to inhibit Bcc infections. In this study, using an antibody produced against the TAA BCAM2418 from the epidemic strain Burkholderia cenocepacia K56-2, we were able to uncover its roles as an adhesin and the type of host glycan structures that serve as recognition targets. The neutralisation of BCAM2418 was found to cause a reduction in the adhesion of the bacteria to bronchial cells and mucins. Moreover, in vivo studies have shown that the anti-BCAM2418 antibody exerted an inhibitory effect during infection in Galleria mellonella. Finally, inferred by glycan arrays, we were able to predict for the first time, host glycan epitopes for a TAA. We show that BCAM2418 favoured binding to 3'sialyl-3-fucosyllactose, histo-blood group A, α-(1,2)-linked Fuc-containing structures, Lewis structures and GM1 gangliosides. In addition, the glycan microarrays demonstrated similar specificities of Burkholderia species for their most intensely binding carbohydrates.

A Trimeric Autotransporter Enhances Biofilm Cohesiveness in Yersinia pseudotuberculosis but Not in Yersinia pestis.

Cohesion of biofilms made by Yersinia pestis and Yersinia pseudotuberculosis has been attributed solely to an extracellular polysaccharide matrix encoded by the hms genes (Hms-dependent extracellular matrix [Hms-ECM]). However, mutations in the Y. pseudotuberculosis BarA/UvrY/CsrB regulatory cascade enhance biofilm stability without dramatically increasing Hms-ECM production. We found that treatment with proteinase K enzyme effectively destabilized Y. pseudotuberculosiscsrB mutant biofilms, suggesting that cell-cell interactions might be mediated by protein adhesins or extracellular matrix proteins. We identified an uncharacterized trimeric autotransporter lipoprotein (YPTB2394), repressed by csrB, which has been referred to as YadE. Biofilms made by a ΔyadE mutant strain were extremely sensitive to mechanical disruption. Overexpression of yadE in wild-type Y. pseudotuberculosis increased biofilm cohesion, similar to biofilms made by csrB or uvrY mutants. We found that the Rcs signaling cascade, which represses Hms-ECM production, activated expression of yadE The yadE gene appears to be functional in Y. pseudotuberculosis but is a pseudogene in modern Y. pestis strains. Expression of functional yadE in Y. pestis KIM6+ weakened biofilms made by these bacteria. This suggests that although the YadE autotransporter protein increases Y. pseudotuberculosis biofilm stability, it may be incompatible with the Hms-ECM production that is essential for Y. pestis biofilm production in fleas. Inactivation of yadE in Y. pestis may be another instance of selective gene loss in the evolution of flea-borne transmission by this species.IMPORTANCE The evolution of Yersinia pestis from its Y. pseudotuberculosis ancestor involved gene acquisition and gene losses, leading to differences in biofilm production. Characterizing the unique biofilm features of both species may provide better understanding of how each adapts to its specific niches. This study identifies a trimeric autotransporter, YadE, that promotes biofilm stability of Y. pseudotuberculosis but which has been inactivated in Y. pestis, perhaps because it is not compatible with the Hms polysaccharide that is crucial for biofilms inside fleas. We also reveal that the Rcs signaling cascade, which represses Hms expression, activates YadE in Y. pseudotuberculosis The ability of Y. pseudotuberculosis to use polysaccharide or YadE protein for cell-cell adhesion may help it produce biofilms in different environments.

Immunogenicity of trimeric autotransporter adhesins and their potential as vaccine targets.

The current problem of increasing antibiotic resistance and the resurgence of numerous infections indicate the need for novel vaccination strategies more than ever. In vaccine development, the search for and the selection of adequate vaccine antigens is the first important step. In recent years, bacterial outer membrane proteins have become of major interest, as they are the main proteins interacting with the extracellular environment. Trimeric autotransporter adhesins (TAAs) are important virulence factors in many Gram-negative bacteria, are localised on the bacterial surface, and mediate the first adherence to host cells in the course of infection. One example is the Neisseria adhesin A (NadA), which is currently used as a subunit in a licensed vaccine against Neisseria meningitidis. Other TAAs that seem promising vaccine candidates are the Acinetobacter trimeric autotransporter (Ata), the Haemophilus influenzae adhesin (Hia), and TAAs of the genus Bartonella. Here, we review the suitability of various TAAs as vaccine candidates.

Recent advances in the understanding of trimeric autotransporter adhesins.

Adhesion is the initial step in the infection process of gram-negative bacteria. It is usually followed by the formation of biofilms that serve as a hub for further spread of the infection. Type V secretion systems engage in this process by binding to components of the extracellular matrix, which is the first step in the infection process. At the same time they provide protection from the immune system by either binding components of the innate immune system or by establishing a physical layer against aggressors. Trimeric autotransporter adhesins (TAAs) are of particular interest in this family of proteins as they possess a unique structural composition which arises from constraints during translocation. The sequence of individual domains can vary dramatically while the overall structure can be very similar to one another. This patchwork approach allows researchers to draw conclusions of the underlying function of a specific domain in a structure-based approach which underscores the importance of solving structures of yet uncharacterized TAAs and their individual domains to estimate the full extent of functions of the protein a priori. Here, we describe recent advances in understanding the translocation process of TAAs and give an overview of structural motifs that are unique to this class of proteins. The role of BpaC in the infection process of Burkholderia pseudomallei is highlighted as an exceptional example of a TAA being at the centre of infection initiation.

Structural diversity of coiled coils in protein fibers of the bacterial cell envelope.

The cell envelope of bacteria shows great diversity in architecture and composition, to a large extent due to its proteome. Proteins localized to the cell envelope, whether integrally embedded in the membrane, membrane-anchored, or peripherally associated as part of a macromolecular complex, often form elongated fibers, in which coiled coils represent a prominent structural element. These coiled-coil segments show a surprising degree of structural variability, despite being shaped by a small number of simple biophysical rules, foremost being their geometry of interaction referred to as 'knobs-into-holes'. Here we will review this diversity, particularly as it has emerged over the last decade.

On-fiber display of a functional peptide at sites distant from the cell surface using a long bacterionanofiber of a trimeric autotransporter adhesin.

In the cell surface display system, the distance of a surface-displayed molecule from the cell surface should influence its functionality due to the interference by other surface structures. For the purpose of developing this distance-variable surface display system, we utilized a long fibrous adhesin, Acinetobacter trimeric autotransporter adhesin (AtaA) of the strain Tol 5. We constructed His-tagged full-length and shorter AtaA fibers designed by N-terminal deletion and expressed them in the ΔataA mutant. Immunoelectron microscopy clearly showed that they formed fibers on the cell surface and the His-tag was displayed on the fiber tip located at fixed distances from the cell surface. N-terminal deletion of AtaA shortened the distance between the His-tag and the cell surface, as designed. Time-course analyses of the cell-to-Ni-Sepharose beads binding revealed that cells producing the longer fibers bound more rapidly to the beads. The His-tagged AtaA derivatives were also displayed on Escherichia coli cells, and a similar tendency was shown; the His-tag on the longer fiber was more functional than that on the shorter one. Thus, we developed an on-fiber display system of a functional peptide using a long trimeric autotransporter adhesin (TAA) fiber, which can vary the distance between the displayed molecule and the cell surface.

Bartonella Species, an Emerging Cause of Blood-Culture-Negative Endocarditis.

Since the reclassification of the genus Bartonella in 1993, the number of species has grown from 1 to 45 currently designated members. Likewise, the association of different Bartonella species with human disease continues to grow, as does the range of clinical presentations associated with these bacteria. Among these, blood-culture-negative endocarditis stands out as a common, often undiagnosed, clinical presentation of infection with several different Bartonella species. The limitations of laboratory tests resulting in this underdiagnosis of Bartonella endocarditis are discussed. The varied clinical picture of Bartonella infection and a review of clinical aspects of endocarditis caused by Bartonella are presented. We also summarize the current knowledge of the molecular basis of Bartonella pathogenesis, focusing on surface adhesins in the two Bartonella species that most commonly cause endocarditis, B. henselae and B. quintana. We discuss evidence that surface adhesins are important factors for autoaggregation and biofilm formation by Bartonella species. Finally, we propose that biofilm formation is a critical step in the formation of vegetative masses during Bartonella-mediated endocarditis and represents a potential reservoir for persistence by these bacteria.

Optimization of Haemophilus influenzae adhesin transmembrane domain expression in Escherichia coli.

To obtain a high yield of the transmembrane domain of Haemophilus influenzae adhesin (HiaTD) in Escherichia coli, we attempted to express the HiaTD with and without a signal sequence using a T7 expression system. The expression level of HiaTD after induction was followed by quantification of the purified HiaTD, flow cytometric analysis of the outer membrane integrated HiaTD, and immunoblotting assay of fractionated cell lysate. In the expression system with a signal sequence, although the amount of cell-surface-expressed HiaTD increased over time, the number of HiaTD-expressing cells decreased, probably because of plasmid instability. As a result, the amount of purified HiaTD reached a plateau at 2 h postinduction. Although expression without the signal sequence provides a large amount of proteins as inclusion bodies in some membrane proteins, HiaTD expressed without a signal sequence was not observed as inclusion bodies and seemed to be assembled into the outer membrane during or after cell lysis.

Functional and Structural Roles of Coiled Coils.

Coiled coils appear in countless structural contexts, as appendages to small proteins, as parts of multi-domain proteins, and as building blocks of filaments. Although their structure is unpretentious and their basic properties are understood in great detail, the spectrum of functional properties they provide in different proteins has become increasingly complex. This chapter aims to depict this functional spectrum, to identify common themes and their molecular basis, with an emphasis on new insights gained into dynamic aspects.

Defining the Mechanical Determinants of Kingella kingae Adherence to Host Cells.

Kingella kingae is an important pathogen in young children and initiates infection by colonizing the posterior pharynx. Adherence to pharyngeal epithelial cells is an important first step in the process of colonization. In the present study, we sought to elucidate the interplay of type IV pili (T4P), a trimeric autotransporter adhesin called Knh, and the polysaccharide capsule in K. kingae adherence to host cells. Using adherence assays performed under shear stress, we observed that a strain expressing only Knh was capable of higher levels of adherence than a strain expressing only T4P. Using atomic force microscopy and transmission electron microscopy (TEM), we established that the capsule had a mean depth of 700 nm and that Knh was approximately 110 nm long. Using cationic ferritin capsule staining and thin-section transmission electron microscopy, we found that when bacteria expressing retractile T4P were in close contact with host cells, the capsule was absent at the point of contact between the bacterium and the host cell membrane. In a T4P retraction-deficient mutant, the capsule depth remained intact and adherence levels were markedly reduced. These results support the following model: T4P make initial contact with the host cell and mediate low-strength adherence. T4P retract, pulling the organism closer to the host cell and displacing the capsule, allowing Knh to be exposed and mediate high-strength, tight adherence to the host cell surface. This report provides the first description of the mechanical displacement of capsule enabling intimate bacterial adherence to host cells.IMPORTANCE Adherence to host cells is an important first step in bacterial colonization and pathogenicity. Kingella kingae has three surface factors that are involved in adherence: type IV pili (T4P), a trimeric autotransporter adhesin called Knh, and a polysaccharide capsule. Our results suggest that T4P mediate initial contact and low-strength adherence to host cells. T4P retraction draws the bacterium closer to the host cell and causes the displacement of capsule. This displacement exposes Knh and allows Knh to mediate high-strength adherence to the host cell. This work provides new insight into the interplay of T4P, a nonpilus adhesin, and a capsule and their effects on bacterial adherence to host cells.

Reversible bacterial immobilization based on the salt-dependent adhesion of the bacterionanofiber protein AtaA.

BACKGROUND: Immobilization of microbial cells is an important strategy for the efficient use of whole-cell catalysts because it simplifies product separation, enables the cell concentration to be increased, stabilizes enzymatic activity, and permits repeated or continuous biocatalyst use. However, conventional immobilization methods have practical limitations, such as limited mass transfer in the inner part of a gel, gel fragility, cell leakage from the support matrix, and adverse effects on cell viability and catalytic activity. We previously showed a new method for bacterial cell immobilization using AtaA, a member of the trimeric autotransporter adhesin family found in Acinetobacter sp. Tol 5. This approach is expected to solve the drawbacks of conventional immobilization methods. However, similar to all other immobilization methods, the use of support materials increases the cost of bioprocesses and subsequent waste materials. RESULTS: We found that the stickiness of the AtaA molecule isolated from Tol 5 cells is drastically diminished at ionic strengths lower than 10 mM and that it cannot adhere in deionized water, which also inhibits cell adhesion mediated by AtaA. Cells immobilized on well plates and polyurethane foam in a salt solution were detached in deionized water by rinsing and shaking, respectively. The detached cells regained their adhesiveness in a salt solution and could rapidly be re-immobilized. The cells expressing the ataA gene maintained their adhesiveness throughout four repeated immobilization and detachment cycles and could be repeatedly immobilized to polyurethane foam by a 10-min shake in a flask. We also demonstrated that both bacterial cells and a support used in a reaction could be reused for a different type of reaction after detachment of the initially immobilized cells from the support and a subsequent immobilization step. CONCLUSIONS: We invented a unique reversible immobilization method based on the salt-dependent adhesion of the AtaA molecule that allows us to reuse bacterial cells and supports by a simple manipulation involving a deionized water wash. This mitigates problems caused by the use of support materials and greatly helps to enhance the efficiency and productivity of microbial production processes.

Structure of the meningococcal vaccine antigen NadA and epitope mapping of a bactericidal antibody.

Serogroup B Neisseria meningitidis (MenB) is a major cause of severe sepsis and invasive meningococcal disease, which is associated with 5-15% mortality and devastating long-term sequelae. Neisserial adhesin A (NadA), a trimeric autotransporter adhesin (TAA) that acts in adhesion to and invasion of host epithelial cells, is one of the three antigens discovered by genome mining that are part of the MenB vaccine that recently was approved by the European Medicines Agency. Here we present the crystal structure of NadA variant 5 at 2 Å resolution and transmission electron microscopy data for NadA variant 3 that is present in the vaccine. The two variants show similar overall topology with a novel TAA fold predominantly composed of trimeric coiled-coils with three protruding wing-like structures that create an unusual N-terminal head domain. Detailed mapping of the binding site of a bactericidal antibody by hydrogen/deuterium exchange MS shows that a protective conformational epitope is located in the head of NadA. These results provide information that is important for elucidating the biological function and vaccine efficacy of NadA.

Yersinia adhesin A (YadA)--beauty & beast.

The trimeric autotransporter adhesin Yersinia adhesin A is the prototype of the type Vc secretion systems. It is expressed by enteropathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis strains, but not by Yersinia pestis. A characteristic trait of YadA is its modular composition and trimeric nature. YadA consists of an N-terminal passenger domain which is exposed on the bacterial cell surface. The translocation of this passenger onto the surface is facilitated by a C-terminal ß-barrel domain which concomitantly anchors YadA into the outer membrane with three YadA monomers contributing to the formation of a single ß-barrel. In Y. enterocolitica, but not Y. pseudotuberculosis, YadA is a decisive virulence factor and its deletion renders the bacteria virtually avirulent in mouse models of infection. This striking importance of YadA in infection may derive from its manifold functions in host cell interaction. Presumably the most important function of YadA is that it mediates adhesion to extracellular matrix components of eukaryotic host cells. Only tight adhesion allows for the injection of "anti-host" effector proteins via a type III secretion system into the host cell cytosol. These effector proteins enable Yersinia to subvert the host immune system in order to replicate and establish infection. YadA is also essential for the survival of Y. enterocolitica upon contact with serum, an important immune-evasion mechanism called serum resistance. To this end, YadA interacts with several components of the host complement system, the first line of immune defense. This review will summarize recent findings about the structure and biogenesis of YadA and its interactions with the host complement system.

A domain dictionary of trimeric autotransporter adhesins.

Trimeric autotransporter adhesins (TAAs) are modular, highly repetitive outer membrane proteins that mediate adhesion to external surfaces in many Gram-negative bacteria. In recent years, several TAAs have been investigated in considerable detail, also at the structural level. However, in their vast majority, putative TAAs in prokaryotic genomes remain poorly annotated, due to their sequence diversity and changeable domain architecture. In order to achieve an automated annotation of these proteins that is both detailed and accurate we have taken a domain dictionary approach, in which we identify recurrent domains by sequence comparisons, produce bioinformatic descriptors for each domain type, and connect these to structural information where available. We implemented this approach in a web-based platform, daTAA, in 2008 and demonstrated its applicability by reconstructing the complete fiber structure of a TAA conserved in enterobacteria. Here we review current knowledge on the domain structure of TAAs.

Application of the adhesive bacterionanofiber AtaA to a novel microbial immobilization method for the production of indigo as a model chemical.

The toluene-degrading bacterium Acinetobacter sp. Tol 5 shows high adhesiveness mediated by the bacterionanofiber protein AtaA, which is a new member of the trimeric autotransporter adhesin (TAA) family. In contrast to other reported TAAs, AtaA mediates the adhesion of Tol 5 to various abiotic surfaces ranging from hydrophobic plastics to hydrophilic glass and stainless steel. The expression of ataA in industrially relevant bacteria improves their adhesiveness and enables immobilization directly onto support materials. This represents a new method that can be alternated with conventional immobilization via gel entrapment and chemical bonding. In this study, we demonstrate the feasibility of this immobilizing method by utilizing AtaA. As a model case for this method, the indigo producer Acinetobacter sp. ST-550 was transformed with ataA and immobilized on a polyurethane support. The immobilized ST-550 cells were transferred directly to a reaction solution containing indole as the substrate. The immobilized ST-550 cells showed a faster indigo production rate at high concentrations of indole compared with planktonic ST-550 not expressing the ataA gene, implying that immobilization enhanced the tolerance of ST-550 to the substrate indole. As a result, the immobilized ST-550 produced fivefold higher levels of indigo than planktonic ST-550. These results proved that AtaA is useful for bacterial immobilization.

The Trimeric Autotransporter Adhesin SadA from Salmonella spp. as a Novel Bacterial Surface Display System.

Bacterial surface display platforms have been developed for applications such as vaccine delivery and peptide library screening. The type V secretion system is an attractive anchoring motif for the surface expression of foreign proteins in gram-negative bacteria. SadA belongs to subtype C of the type V secretion system derived from Salmonella spp. and promotes biofilm formation and host cell adherence. The inner membrane lipoprotein SadB is important for SadA translocation. In this study, SadA was used as an anchoring motif to expose heterologous proteins in Salmonella typhimurium using SadB. The ability of SadA to display heterologous proteins on the S. typhimurium surface in the presence of SadB was approximately three-fold higher than that in its absence of SadB. Compared to full-length SadA, truncated SadAs (SadA877 and SadA269) showed similar display capacities when exposing the B-cell epitopes of urease B from Helicobacter pylori (UreB158-172aa and UreB349-363aa). We grafted different protein domains, including mScarlet (red fluorescent protein), the urease B fragment (UreBm) from H. pylori SS1, and/or protective antigen domain 4 from Bacillus anthracis A16R (PAD4), onto SadA877 or SadA1292. Whole-cell dot blotting, immunofluorescence, and flow cytometric analyses confirmed the localization of Flag×3-mScarlet (~30 kDa) and Flag×3-UreBm-mScarlet (~58 kDa) to the S. typhimurium surface using truncated SadA877 or SadA1292 as an anchoring motif. However, Flag×3-UreBm-PAD4-mScarlet (~75 kDa) was displayed on S. typhimurium using SadA1292. The oral administrated pSadBA1292-FUM/StmΔygeAΔmurI and pSadBA877-FUM/StmΔygeAΔmurI could elicit a significant mucosal and humoral immunity response. SadA could thus be used as an anchoring motif for the surface expression of large heterologous proteins as a potential strategy for attenuated bacterial vaccine development.

Growth phase-dependent production of the adhesive nanofiber protein AtaA in Acinetobacter sp. Tol 5.

AtaA, the sticky, long, and peritrichate nanofiber protein from Acinetobacter sp. Tol 5, mediates autoagglutination and is highly adhesive to various material surfaces, resulting in a biofilm. Although the production of the adhesive nanofiber protein is likely to require a large amount of energy and material sources, the relationship between AtaA fiber production and cell growth remains unknown. Here, we report the growth phase-dependent AtaA fiber production in Tol 5. We examined the ataA gene expression in different growth phases using a reporter gene assay with an originally developed reporter plasmid and using reverse transcription-quantitative polymerase chain reaction. Bacterial cells with surface-displayed AtaA at different growth phases were immunostained and analyzed using fluorescence flow cytometry and confocal laser scanning microscopy. The results indicate that Tol 5 modulated the amount of surface-displayed AtaA at the transcriptional level. AtaA production was low in the early growth phase but remarkably increased in the late growth phase, covering the whole bacterial cell with AtaA fibers in the stationary phase. Tol 5 displayed AtaA fibers poorly in the early growth phase and showed less autoagglutination and adhesiveness than those in the stationary phase. Although Tol 5 grew as fast as its ataA-deficient mutant in the early growth phase, the optical density of Tol 5 culture was slightly lower than that of the ataA-deficient mutant in the late growth phase. Based on these experimental results, we propose the growth-phase-dependent production of AtaA fiber for efficient and fast cell growth.

Regions Important for Hemagglutination Activity and Serotypes of Avibacterium paragallinarum HMTp210 Protein.

Avibacterium paragallinarum is an important respiratory pathogen of domestic chickens. Avibacterium paragallinarum has been subtyped into three serogroups and nine serovars according to the Page and revised Kume schemes. The major hemagglutinin antigen of A. paragallinarum is HMTp210, which is a large protein of about 2000 amino acids (aa), including a 70-aa signal peptide at its N-terminal end. However, the regions important for the hemagglutination (HA) activity and serotypes of HMTp210 remain unclear. In this study we constructed a series of A. paragallinarum strains expressing HMTp210 in-frame deletion mutants and determined their HA titers to identify the regions important for the HA activity and serotypes of HMTp210. Two distinct types of HA activities were found in HMTp210. The type 1 HA activity resided in the region spanning the full-length HA (aa 71-2084), whereas the type 2 resided in the region spanning aa 1003-2084. The putative ligand binding of the type 1 HA activity was located at aa 176-360, which had a structure similar to YadA of Yersinia enterocolitica. The putative ligand binding site of the type 2 HA activity was located at aa 1003-1125, which had a structure similar to UspA1 from Moraxella catarrhalis. The type 1 HA activity appeared to be Page serogroup specific, whereas type 2 appeared to be Kume serovar specific. Finally, sequence analyses of the regions spanning aa 1-400 and aa 1100-1600 of HMTp210 could be useful for the molecular serotyping (the Page and revised Kume schemes) of A. paragallinarum isolates.

Regiones importantes para la actividad de hemaglutinación y serotipos de la proteína HMTp210 de Avibacterium paragallinarum. La bacteria Avibacterium paragallinarum es un patógeno respiratorio importante de los pollos domésticos. Avibacterium paragallinarum se subtipificó en tres serogrupos y nueve serovares de acuerdo con los esquemas revisados de Page y Kume. El principal antígeno de la hemaglutinina de A. paragallinarum es la proteína HMTp210, que es una proteína grande de unos 2000 aminoácidos (aa), que incluye un péptido señal de 70 aminoácidos en su extremo N-terminal. Sin embargo, las regiones importantes para la actividad de hemaglutinación (HA) y de los serotipos de la proteína HMTp210 siguen sin estar determinados. En este estudio, se construyó una serie de cepas de A. paragallinarum que expresaban mutantes de deleción en marco de lectura de HMTp210 y se determinaron sus títulos de hemaglutinación para identificar las regiones importantes para la actividad de hemaglutinación y de los serotipos de HMTp210. Se encontraron dos tipos distintos de actividades hemaglutinación en la proteína HMTp210. La actividad de hemaglutinación de tipo 1 residía en la región que abarcaba la longitud completa (aminoácidos 71­2084), mientras que la de tipo 2 residía en la región que abarcaba entre los aminoácidos 1003­2084. El sitio supuesto de unión al ligando de la actividad de hemaglutinación tipo 1 se ubicó entre los aminoácidos 176­360, que tenía una estructura similar a la proteína YadA de Yersinia enterocolitica. El supuesto sitio de unión del ligando de la actividad de hemaglutinación tipo 2 se ubicó entre los aminoácidos 1003­1125, que tenía una estructura similar a la proteína UspA1 de Moraxella catarrhalis. La actividad de hemaglutinación tipo 1 parecía ser específica del serogrupo Page, mientras que la hemaglutinación tipo 2 parecía ser específica del serovar Kume. Finalmente, los análisis de secuencias de las regiones que abarcan los aminácidos 1­400 y aminoácidos 1100­1600 de HMTp210 podrían ser útiles para la serotipificación molecular (por el esquema revisado de Page y Kume revisado) de aislamientos de A. paragallinarum.

Adhesion of Bartonella henselae to Fibronectin Is Mediated via Repetitive Motifs Present in the Stalk of Bartonella Adhesin A.

Adhesion to host cells is the first and most crucial step in infections with pathogenic Gram-negative bacteria and is often mediated by trimeric autotransporter adhesins (TAAs). Bartonella henselae targets the extracellular matrix glycoprotein fibronectin (Fn) via the Bartonella adhesin A (BadA) attaching the bacteria to the host cell. The TAA BadA is characterized by a highly repetitive passenger domain consisting of 30 neck/stalk domains with various degrees of similarity. To elucidate the motif sequences mediating Fn binding, we generated 10 modified BadA constructs and verified their expression via Western blotting, confocal laser scanning, and electron microscopy. We analyzed their ability to bind human plasma Fn using quantitative whole-cell enzyme-linked immunosorbent assays (ELISAs) and fluorescence microscopy. Polyclonal antibodies targeting a 15-mer amino acid motif sequence proved to reduce Fn binding. We suggest that BadA adheres to Fn in a cumulative effort with quick saturation primarily via unpaired ß-strands appearing in motifs repeatedly present throughout the neck/stalk region. In addition, we demonstrated that the length of truncated BadA constructs correlates with the immunoreactivity of human patient sera. The identification of BadA-Fn binding regions will support the development of new "antiadhesive" compounds inhibiting the initial adherence of B. henselae and other TAA-expressing pathogens to host cells. IMPORTANCE Trimeric autotransporter adhesins (TAAs) are important virulence factors and are widely present in various pathogenic Gram-negative bacteria. TAA-expressing bacteria cause a wide spectrum of human diseases, such as cat scratch disease (Bartonella henselae), enterocolitis (Yersinia enterocolitica), meningitis (Neisseria meningitis), and bloodstream infections (multidrug-resistant Acinetobacter baumannii). TAA-targeted antiadhesive strategies (against, e.g., Bartonella adhesin A [BadA], Yersinia adhesin A [YadA], Neisseria adhesin A [NadA], and Acinetobacter trimeric autotransporter [Ata]) might represent a universal strategy to counteract such bacterial infections. BadA is one of the best characterized TAAs, and because of its high number of (sub)domains, it serves as an attractive adhesin to study the domain-function relationship of TAAs in the infection process. The identification of common binding motifs between TAAs (here, BadA) and their major binding partner (here, fibronectin) provides a basis toward the design of novel "antiadhesive" compounds preventing the initial adherence of Gram-negative bacteria in infections.

Single-cell adhesion force mapping of a highly sticky bacterium in liquid.

The sticky bacterium Acinetobacter sp. Tol 5 adheres to various material surfaces via its cell surface nanofiber protein, AtaA. This adhesiveness has only been evaluated based on the amount of cells adhering to a surface. In this study, the adhesion force mapping of a single Tol 5 cell in liquid using the quantitative imaging mode of atomic force microscopy (AFM) revealed that the adhesion of Tol 5 was near 2 nN, which was 1-2 orders of magnitude higher than that of other adhesive bacteria. The adhesion force of a cell became stronger with the increase in AtaA molecules present on the cell surface. Many fibers of peritrichate AtaA molecules simultaneously interact with a surface, strongly attaching the cell to the surface. The adhesion force of a Tol 5 cell was drastically reduced in the presence of 1% casamino acids but not in deionized water (DW), although both liquids decrease the adhesiveness of Tol 5 cells, suggesting that DW and casamino acids inhibit the cell approaching step and the subsequent direct interaction step of AtaA with surfaces, respectively. Heterologous production of AtaA provided non-adhesive Acinetobacter baylyi ADP1 cells with a strong adhesion force to AFM tip surfaces of silicon and gold.