Biomimetic delivery of emodin via macrophage membrane-coated UiO-66-NH2 nanoparticles for acute pancreatitis treatment.

Acute pancreatitis (AP) is a severe inflammatory condition with a rising incidence and high mortality rates, especially in severe cases. Emodin (ED), known for its potent anti-inflammatory properties, holds promise in addressing AP. However, its clinical application is hindered by limitations such as low bioavailability and insufficient target specificity. Herein, we developed a novel drug delivery system using macrophage membrane-coated UiO-66-NH2 nanoparticles loaded with ED (MVs-UiO-ED). UiO-66-NH2 was successfully synthesized and characterized, revealing an octahedral structure with a suitable size distribution. The successful loading of ED onto UiO-66-NH2 was confirmed by ultraviolet and infrared spectroscopy. Subsequently, MVs-UiO-ED was prepared by coating macrophage membrane-derived vesicles onto UiO-ED, resulting in a biomimetic delivery system. In vitro release studies demonstrated that MVs-UiO-ED exhibited a sustained-release profile, indicating its potential for prolonged drug circulation. An AP mouse model was established to evaluate the therapeutic efficacy of MVs-UiO-ED. Compared with the model group, MVs-UiO-ED significantly reduced serum levels of α-amylase and lipase, two indicators of pancreatitis severity. Furthermore, histopathological examinations revealed that MVs-UiO-ED ameliorated pancreatic tissue damage. This study underscores the potential of MVs-UiO-ED as an effective therapeutic approach for AP.

Microwave-Assisted Rapid Substitution of Ti for Zr to Produce Bimetallic (Zr/Ti)UiO-66-NH2 with Congenetic "Shell-Core" Structure for Enhancing Photocatalytic Removal of Nitric Oxide.

Efficient nitric oxide (NO) removal without nitrogen dioxide (NO2 ) emission is desired for the control of air pollution. Herein, a series of (Zr/Ti)UiO-66-NH2 with congenetic shell-core structure, denoted as Ti-UION, are rapidly synthesized by microwave-assisted post-synthetic modification for NO removal. The optimal Ti-UION (i.e., 2.5Ti-UION) exhibits the highest activity of 80.74% without NO2 emission with moisture, which is 21.65% greater than that of the UiO-66-NH2 . The NO removal efficiency of 2.5Ti-UION further increases to 95.92% without photocatalyst deactivation under an anhydrous condition. This is because selectively produced NO2 in photocatalysis is completely adsorbed into micropores, refreshing active sites for subsequent reaction. In addition, the enhanced photocatalytic activity after Ti substitution is due to the presence of Ti electron acceptor, the potential difference between the shell and core of Ti-UION crystal, and the high conductivity of TiO units. Additionally, the improved adsorption of gas molecules not only favors NO oxidation, but also avoids the emission of NO2 . This work provides a feasible strategy for rapid metal substitution in metal-organic frameworks and insights into enhanced NO photodegradation.

UiO-66-NH2: a recyclable and efficient sorbent for dispersive solid-phase extraction of fluorinated aromatic carboxylic acids from aqueous matrices.

The present study describes the trace analysis of 23 fluorinated aromatic carboxylic acids based on the dispersive solid-phase extraction (dSPE) technique using UiO-66-NH2 MOF as efficient, recyclable sorbent, and GC-MS negative ionization mass spectrometry (NICI MS) as determination technique. All 23 fluorobenzoic acids (FBAs) were enriched, separated, and eluted in a shorter retention time; the derivatization was done by pentafluorobenzyl bromide (1% in acetone), in which the use of inorganic base K2CO3 was improved by triethylamine to increase the lifespan of the GC column. The performance of UiO-66-NH2 was evaluated by dSPE in Milli-Q water, artificial seawater, and tap water samples, and the impact of various parameters on the extraction efficiency was investigated by GC-NICI MS. The method was found to be precise, reproducible, and applicable to the seawater samples. In the linearity range, the regression value was found to be >0.98; LOD and LOQ were found to be in the range of 0.33-1.17 ng/mL and 1.23-3.33 ng/mL, respectively; and the value of the extraction efficiency was found to range between 98.45 and 104.39% for Milli-Q water samples, 69.13-105.48% for salt-rich seawater samples, and 92.56-103.50% for tap water samples with a maximum RSD value of 6.87% that confirms the applicability of the method to different water matrices.

NH2-Modified UiO-66: Structural Characteristics and Functional Properties.

The development of new functional materials based on metal-organic frameworks (MOFs) for adsorption and catalytic applications is one of the promising trends of modern materials science. The Zr-based MOFs, specifically UiO-66, are considered as the supports for metallic catalysts for the 5-hydroxymethylfurfural platform molecule reduction into valuable products. The present work focused on the effect of NH2 modification of UiO-66 on its structure and functional properties. The samples were prepared by a solvothermal method. The structure of the obtained materials was studied by X-ray diffraction, IR spectroscopy, UV-visible spectroscopy, and low-temperature nitrogen adsorption. Basic properties were investigated by HCl and CH3COOH adsorption, and electrokinetic properties were studied by electrophoretic light scattering. UiO-66-NH2 samples with different contents of aminoterephthalate linkers were successfully prepared. A gradual decrease in the specific surface area and the fraction of micropores with a diameter of ~0.9 nm was observed with an increase in the aminoterephthalate content. A proportional increase in the total number of basic sites in UiO-66-NH2 samples was established with an increase in the aminoterephthalate content up to 75%. At the same time, a noticeable decrease in the total number of basic sites and an increase in their strength with higher aminoterephthalate content was observed.

Selective removal of heavy metals by Zr-based MOFs in wastewater: New acid and amino functionalization strategy.

Zr-based metal-organic frameworks (MOFs) have been developed in recent years to treat heavy metals, e.g. hexavalent chromium Cr6+ pollution, which damages the surrounding ecosystem and threaten human health. This kind of MOF is stable and convenient to prepare, but has the disadvantage of low adsorption capacity, limiting its wide application. To this end, a novel formic acid and amino modified MOFs were prepared, referred to as Form-UiO-66-NH2. Due to the modification of formic acid, its specific surface area, pore size, and crystal size were effectively expanded, and the adsorption capacity of Cr6+ was significantly enhanced. Under optimal conditions, Form-UiO-66-NH2 exhibited an excellent adsorption capacity (338.98 mg/g), ∼10 times higher than that reported for unmodified Zr-based MOFs and most other adsorbents. An in-depth study on the photoelectronic properties and pH confirmed that the adsorption mechanism of Form-UiO-66-NH2 to Cr6+ was electrostatic adsorption. After modification, the improvement of Cr6+ adsorption capacity by Form-UiO-66-NH2 was attributed to the expansion of its specific surface area and the increase in its surface charge. The present study revealed an important finding that Form-UiO-66-NH2 elucidated selective adsorption to Cr6+ in mixed wastewater containing toxic heavy metal ions and common nonmetallic water quality factors. This research provided a new acid and amino functionalization perspective for improving the adsorption capacity of Zr-based MOF adsorbents while simultaneously demonstrating their pertinence to target contaminant adsorption.

Interfacial Charge Modulation via in situ Fabrication of 3D Conductive Platform with MOF Nanoparticles for Photocatalytic Reduction of CO2.

Highly-efficient photocatalytic conversion of CO2 into valuable carbon-contained chemicals possesses a tremendous potential in solving the energy crisis and global warming problem. However, the inadequate separation of photogenerated electron-hole pairs and the unsatisfied capture of CO2 stay the chief roadblocks. Herein, we designed a novel photocatalyst for CO2 reduction by assembling three-dimensional graphene (3D GR) with a typical metal-organic framework material UIO-66-NH2 , aiming to construct a built-in electric field for charge separation as well as taking advantage of the typical 3D structure of GR for maximizing the exposed absorption site on the surface. The performance evaluation demonstrated that the photocatalytic activity has been improved for the composite materials compared with that of the pure UIO-66-NH2 . Further mechanism investigations proved that the enhanced photocatalytic performance is attributed to the synergy of enhanced CO2 absorption and inhibited photogenerated charge recombination, which could be owing to the better distribution and exposure of absorption and reaction sites on composites, and the redistribution of photogenerated carriers between 3D GR and UIO-66-NH2 . This study provides a promising pathway to probe nanocomposites based on MOFs in environmental improvement and other relevant fields.

Lateral flow immunoassay based on polydopamine-coated metal-organic framework for the visual detection of enrofloxacin in milk.

Herein, we report a new polydopamine (PDA)-coated metal-organic framework (MOF) as a label to improve the sensitivity of lateral flow immunoassay (LFIA). The MOF, UiO-66-NH2, was synthesized via the hydrothermal method, and it exhibited the advantageous features of ordered pore structure, strong absorbance, and high specific surface area. Subsequently, UiO-66-NH2 was coated with PDA to improve the antibody coupling effectivity and light absorption ability. The optical intensity and antibody coupling efficiency of UiO-66@PDA were superior to those of gold nanoparticles (AuNPs). Under the optimum condition, the limit of detection and cutoff value of UiO-66@PDA-LFIA in detecting enrofloxacin were 0.045 and 1.0 ng/mL, respectively, which were lower than those of AuNPs-LFIA (0.095 and 5 ng/mL). The recoveries of UiO-66@PDA-LFIA in low-fat milk and whole milk were 85.6-107.4% and 79.3-115.5%, respectively, with coefficients of variation of 2.91-9.59% and 3.91-11.8%, respectively, as further confirmed by liquid chromatography-tandem mass spectrometry. These results indicate that UiO-66@PDA can be used as a novel probe for LFIA development and applications. Graphical abstract.

Three-dimensional graphene/amino-functionalized metal-organic framework for simultaneous electrochemical detection of Cd(II), Pb(II), Cu(II), and Hg(II).

Trace detection of multiple toxic heavy metals is a very important and difficult problem, conveniently, sensitively, and reliably. In this work, we developed an innovative electrochemical sensor for simultaneously detected heavy metal ions (Cd2+, Hg2+, Cu2+, and Pb2+). In order to detect trace amounts of Cd(II), Pb(II), Cu(II), and Hg(II) in food quickly, accurately, and at low cost, this study used electrochemical reduction to prepare a screen-printed electrode (3DGO) modified with 3DGO and UiO-66-NH2 composite nanomaterials (UiO-66-NH2/SPCE). The sensing platform is composed of three-dimensional graphene (3DGO), aminated UiO-66 metal-organic framework, named 3DGO/UiO-66-NH2. It is worth noting that the porous structure, amino functional groups on the surface, and large specific surface area of UiO-66-NH2 can enrich and promote the absorption of heavy metal ions. 3DGO was introduced to improve the electrochemical activity and conductivity of UiO-66-NH2 material. The construction of this new sensing platform, which can synchronously, reliably, and sensitively simultaneously detect Cd2+, Pb2+, Cu2+, and Hg2+ only in 150 s in the linear range of 0.01-0.35 pM with the detection limitations, is 10.90 fM, 5.98 fM, 2.89 fM, and 3.1 fM, respectively. This method provides a new strategy that uses MOF materials for electrochemical detection of a variety of heavy metal ions in food.

Electrochemical sensor based on Ti3C2 membrane doped with UIO-66-NH2 for dopamine.

A Ti3C2 membrane was prepared by doping UIO-66-NH2 with Ti3C2 through hydrogen bonds. When the doping mass ratio of Ti3C2 and UIO-66-NH2 was 6:1, the electrochemical performance was optimal. Characterization was done by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electrochemical impedance spectroscopy (EIS) which exhibited hierarchical cave-like physiognomy, large specific area, outstanding electronic conductive network, and excellent film-forming property. Moreover, the Ti3C2 film was analyzed via atomic force microscopy (AFM), which displayed good mechanical properties and rough surface morphology. The fabricated Ti3C2 membrane/GCE sensor was applied to the detection of dopamine (working potential of + 0.264 V vs. Ag/AgCl) with LOD of 0.81 fM and a sensitivity of 14.72 µA fM-1 cm-2. It was demonstrated that the Ti3C2 membrane can be used to construct nonenzymatic sensors with excellent performance. The fabricated sensor has high selectivity and stability and has good practicability with recoveries of 101.2-103.5% and a relative standard deviation (RSD) of 1.2-2.4%.

Boosted Activity of g-C3N4/UiO-66-NH2 Heterostructures for the Photocatalytic Degradation of Contaminants in Water.

The combination of graphitic carbon nitride and the metal-organic framework UiO-66-NH2 has been developed with the aim to enhance the photocatalytic activity of pure semiconductors. Different proportions of g-C3N4 and UiO-66-NH2 were combined. Complete characterization analysis of the resulting photocatalytic materials was conducted, including N2 adsorption isotherms, XRD, FTIR, STEM-EDX microscopy, DRS-UV-visible, and photoluminescence. The photocatalytic activity was tested in an aqueous solution for the removal of acetaminophen as the target pollutant. From the obtained results, less than 50% of UiO-66-NH2 incorporated in the g-C3N4 structure enhanced the photocatalytic degradation rate of both bare semiconductors. Concretely, 75% of g-C3N4 in the final g-C3N4/UiO-66-NH2 heterostructure led to the best results, i.e., complete acetaminophen elimination initially at 5 mg·L-1 in 2 h with a pseudo-first order rate constant of ca. 2 h-1. The presence of UiO-66-NH2 in the g-C3N4 enhanced the optoelectronic properties, concretely, the separation of the photo-generated charges was improved according to photoluminescence characterization. The better photo-absorption uptake was also confirmed by the determination of the quantum efficiency values of the heterostructure if compared to either pure g-C3N4 or UiO-66-NH2. This photocatalyst with the best activity was further tested at different pH values, with the best degradation rate at a pH close to the pHpzc ~4.15 of the solid. Sequential recycling tests demonstrated that the heterostructure was stable after five cycles of use, i.e., 15 h. A high contribution of photo-generated holes in the process of the degradation of acetaminophen, followed marginally by superoxide radicals, was suggested by scavenger tests.

High-Quality Thin Films of UiO-66-NH2 by Coordination Modulated Layer-by-Layer Liquid Phase Epitaxy.

We report the fabrication of macroscopically and microscopically homogeneous, crack-free metal-organic framework (MOF) UiO-66-NH2 (UiO: Universitetet i Oslo; [Zr6 O4 (OH)4 (bdc-NH2 )6 ]; bdc-NH2 2- : 2-amino-1,4-benzene dicarboxylate) thin films on silicon oxide surfaces. A DMF-free, low-temperature coordination modulated (CM), layer-by-layer liquid phase epitaxy (LPE) using the controlled secondary building block approach (CSA). Efficient substrate activation was determined as a key factor to obtain dense and smooth coatings by comparing UiO-66-NH2 thin films grown on ozone and piranha acid-activated substrates. Films of 2.60 µm thickness with a minimal surface roughness of 2 nm and a high sorption capacity of 3.53 mmol g-1 MeOH (at 25 °C) were typically obtained in an 80-cycle experiment at mild conditions (70 °C, ambient pressure).

Highly stable metal-organic framework UiO-66-NH2for high-performance triboelectric nanogenerators.

The high porosity, controllable size, high surface area, and chemical versatility of a metal-organic framework (MOF) enable it a good material for a triboelectric nanogenerator (TENG), and some MOFs have been incorporated in the fabrication of TENGs. However, the understanding of effects of MOFs on the energy conversion of a TENG is still lacking, which inhibits the improvement of the performance of MOF-based TENGs. Here, UiO-66-NH2MOFs were found to significantly increase the power of a TENG and the mechanism was carefully examined. The electron-withdrawing (EW) ability of Zr-based UiO-66-family MOFs was enhanced by designing the amino functionalized 1,4-terephthalic acid (1,4-BDC) as ligand. The chemically modified UiO-66-NH2was found to increase the surface roughness and surface potential of a composite film with MOFs embedded in polydimethylsiloxane (PDMS) matrix. Thus the total charges due to the contact electrification increased significantly. The composite-based TENG was found to be very durable and its output voltage and current were 4 times and 60 times higher than that of a PDMS-based TENG. This work revealed an effective strategy to design MOFs with excellent EW abilities for high-performance TENGs.

Synergistic impacts of Cu2+ on simultaneous removal of tetracycline and tetracycline resistance genes by PSF/TPU/UiO forward osmosis membrane.

Cu2+, tetracycline (TC), and corresponding tetracycline resistance genes (TRGs) are common micropollutants in aquaculture wastewater, which have great impact on environment and human health. In this study, we developed a thin-film nanocomposite (TFN) forward osmosis (FO) membrane with an electrospinning thermoplastic polyurethane/polysulfone (PSF/TPU) substrate and a UiO-66-NH2 particle interlayer modified active layer. The effects of Cu2+ concentration on the synergetic removal of TC and TRGs (e.g., tetA/M/X/O/C, int1, and 16 S rRNA gene) were analyzed to determine the role of Cu2+ in FO process. The rejection mechanism was also analyzed in depth. Results demonstrated that the rejection of TC and Cu2+ was 99.53% and 97.99%. The rejection of TRGs exceeded 90% (specifically, over 99% for tetC) at a Cu2+ concentration of 500 µg/L when 0.5 M (NH4)2HPO4 was used as draw solution. Complexation reaction between Cu2+ and TC, electrostatic interaction, and the adsorption of Cu2+ on membrane surface were the main contributing factors for the high rejection efficiencies. Altogether, the as-prepared FO membrane holds great potential for simultaneously removing heavy metals, antibiotics, and resistance genes in real wastewater.

Au@Zr-based metal-organic framework composite as an immunosensing platform for determination of hepatitis B virus surface antigen.

An ultrasensitive electrochemical immunosensor has been prepared using an immunofunctionalized zirconium (Zr)-based metal-organic framework (MOF) with gold (Au) decoration Au@UiO-66(NH2) composite-coated glassy carbon electrode (GCE) for the determination of infectious hepatitis B surface antigen (HBsAg). We fabricated GCE with specific composite via immune-functionalization using anti-HBsAg with Au nanoparticles embedded in UiO-66(NH2). The electrochemical sensing performance of the immunofunctionalized Au@UiO-66(NH2)/GCE with HBsAg was characterized by cyclic voltammetry and differential pulse voltammetry. Under optimized conditions, there was a linear dynamic relationship in the buffer system between the electrical signal and HBsAg levels over the range 1.13 fg mL-1-100 ng mL-1 (R2 = 0.999) with a detection limit of 1.13 fg mL-1. The total analysis time was 15 min per sample. Further validations were performed with HBsAg-spiked human serum samples, and similar detection limits as in the buffer system were observed with reduced signal intensities at lower concentrations of HBsAg (1, 10, and 100 fg mL-1) and minimal interference. The HBsAg electrochemical immunosensing assay had good selectivity and excellent reproducibility, thereby indicating its significant potential in the super-fast diagnosis of hepatitis B.

UiO-66-NH2 and Zeolite-Templated Carbon Composites for the Degradation and Adsorption of Nerve Agents.

Composites of metal-organic frameworks and carbon materials have been suggested to be effective materials for the decomposition of chemical warfare agents. In this study, we synthesized UiO-66-NH2/zeolite-templated carbon (ZTC) composites for the adsorption and decomposition of the nerve agents sarin and soman. UiO-66-NH2/ZTC composites with good dispersion were prepared via a solvothermal method. Characterization studies showed that the composites had higher specific surface areas than pristine UiO-66-NH2, with broad pore size distributions centered at 1-2 nm. Owing to their porous nature, the UiO-66-NH2/ZTC composites could adsorb more water at 80% relative humidity. Among the UiO-66-NH2/ZTC composites, U0.8Z0.2 showed the best degradation performance. Characterization and gas adsorption studies revealed that beta-ZTC in U0.8Z0.2 provided additional adsorption and degradation sites for nerve agents. Among the investigated materials, including the pristine materials, U0.8Z0.2 also exhibited the best protection performance against the nerve agents. These results demonstrate that U0.8Z0.2 has the optimal composition for exploiting the degradation performance of pristine UiO-66-NH2 and the adsorption performance of pristine beta-ZTC.

A nanocomposite consisting of etched multiwalled carbon nanotubes, amino-modified metal-organic framework UiO-66 and polyaniline for preconcentration of polycyclic aromatic hydrocarbons prior to their determination by HPLC.

A polyaniline composite doped with etched multi-walled carbon nanotubes and UiO-66-NH2 was prepared by electropolymerization. It was used as a sorbent to extract the polycyclic aromatic hydrocarbons (PAHs) phenanthrene, fluoranthene and pyrene. Its surface morphology, crystal structure and capability of adsorbing PAHs were characterized by scanning electron microscopy, X-ray photoelectron spectrometry, Fourier transform infrared spectrometry and zeta potentiometry. The π stacking and anion-π interactions are shown to play dominant roles in the sorption mechanism. Coupled with high performance liquid chromatography, the composite-modified fiber was applied to detect PAHs in lake water samples by direct immersion extraction. The method excels by (a) wide linear range (0.05-20 ng mL-1), (b) low limits of detection (10 pg mL-1), (c) satisfactory recovery from spiked samples (84.7-113.8%), and (d) good reproducibility (relative standard deviations of <6.5%). The method is superior in terms of costs and reproducibility compared to some pretreatment methods with mass spectrometric detection. Graphical abstractSchematic representation for interaction between PANI-etched MWCNT/UiO-66-NH2 and polycyclic aromatic hydrocarbons (phenanthrene, fluoranthene, pyrene).

Super-Stable, Highly Efficient, and Recyclable Fibrous Metal-Organic Framework Membranes for Precious Metal Recovery from Strong Acidic Solutions.

Precious metals such as palladium (Pd) and platinum (Pt) are marvelous materials in the fields of electronic and catalysis, but they are tapering day by day. Zr(IV)-based metal-organic frameworks (MOFs) are competent for their recovery, notably in harsh environments, while the general powder form limits their practical application. Porous MOF-based membranes with ultraefficient metal ion permeation, strong stability, and high selectivity are, therefore, strikingly preferred. Herein, a set of polymeric fibrous membranes incorporated with the UiO-66 series are fabricated; their adsorption/desorption capabilities toward Pd(II) and Pt(IV) are evaluated from strongly acidic solutions; and the MOF-polymer compatibilities are investigated. Polyurethane (PU)/UiO-66-NH2 showed strong acid resistance and high chemical stability, which are attributable to strong π-π interactions between PU and MOF nanoparticles with a high configuration of energy. The as-fabricated MOF membranes show extremely good adsorption/desorption performances without ruptures/coalitions of nanofibers or leak of MOF nanoparticles, and successfully display the efficacy in a gravity-driven or even continuous-flow system with good recycle performance and selectivity. The as-fabricated MOF membranes set an example of potential MOF-polymer compatibility for practical applications.

Luminescent metal organic frameworks with recognition sites for detection of hypochlorite through energy transfer.

A luminescent metal organic framework (LMOF) of type UiO-66-NH2 was chosen for specific and sensitive detection of trace levels of hypochlorite. Hypochlorite causes the quenching of the blue fluorescence of nano-UiO-66-NH2 (with excitation/emission maxima at 325/430 nm), and this finding forms the basis for a fluorometric assay for hypochlorite. The method overcomes disadvantages of conventional redox-probes which are interfered by oxidants with oxidation capability stronger than that of hypochlorite. Compared with other fluorescent probes for sensing hypochlorite, UiO-66-NH2 has a comparable detection limit of 0.3 µmol L-1 and a broad linearity relationship in the range of 1-8 µmol L-1. The probe was successfully applied to the detection of hypochlorite in complex water samples and living Hela cells. Graphical abstract Schematic representation of hypochlorite induced quenching of the blue fluorescence of nano-UiO-66-NH2 (with excitation/emission maxima at 325/430 nm) through energy transfer. It overcomes disadvantages of conventional redox-probes which are interfered by oxidants with oxidation capability stronger than that of hypochlorite.

An amino-modified metal-organic framework (type UiO-66-NH2) loaded with cadmium(II) and lead(II) ions for simultaneous electrochemical immunosensing of triazophos and thiacloprid.

A method is described for simultaneous voltammetric determination of the pesticides triazophos (TRS) and thiacloprid (THD). A glassy carbon electrode (GCE) was modified with a metal-organic framework (type UiO-66-NH2) which has a large specific surface (1018 m2·g-1) and contains large amounts of Cd(II) and Pb(II) ions, with adsorption capacities of 230 and 271 mg·g-1, respectively. The antigen-loaded particles were then bound to antibody, magnetically separated, and analyzed by square wave voltammetry to give signals for Cd(II) and Pb(II) at -0.82 and - 0.56 V (vs. Ag/AgCl) for TRS and THD, respectively. Under optimized conditions, the method has a wide linear range (0.2-750 ng·mL-1) and low detection limits (0.07 and 0.1 ng·mL-1 at a S/N of 3 for TRS and THD, respectively). It is perceived that this assay represents a useful tool for simultaneous determination of multiple pesticide residues. The method has a wide scope in that may be extended to monitoring of other small organic pollutants by changing the types of metal ions and by using other antibodies. Graphical abstract Schematic presentation of an amino-modified metal-organic framework (type UiO-66-NH2) loaded with Cd(II) and Pb(II) ions for simultaneous electrochemical immunosensing of triazophos (TRS) and thiacloprid (THD). It is based on the fabrication of antigen (Ab)-immobilized UiO-66-NH2-based signal tags (a), and of an antibody (Ab)-immobilized magnetic bead (MB-COOH)-based capture probes (b).

Adsorption of hydrogen arsenate and dihydrogen arsenate ions from neutral water by UiO-66-NH2.

The metal-organic framework (MOF) UiO-66-NH2 was synthesized with different substrate to solvent ratios and its morphology, surface area, pore distributions, and NMR, XRD, and TGA-FTIR patterns were obtained. Adsorption tests at pH 7 and 25 °C showed that the produced UiO-66-NH2 has a hydrogen arsenate adsorption capacity of 76.9 mg/g. With the affinity onto Zr clusters, this MOF also can adsorb phosphate ions from water. Treatment with 1-4 M hydrochloric acid (HCl) protonated the amine groups in the MOF. Treatment with 1 M HCl at 25 °C for 6 h maximized the adsorption capacity of UiO-66-NH2 to 161.3 mg/g, such that the protonated amine groups accounted for 53.7% of the adsorption of arsenate from the water. The use of excessively strong acid at elevated temperature reduced the adsorption capacity.