Layer-Polarized Anomalous Hall Effects from Inversion-Symmetric Single-Layer Lattices.

In the field of physics and materials science, the discovery of the layer-polarized anomalous Hall effect (LP-AHE) stands as a crucial development. The current research paradigm is rooted in topological or inversion-asymmetric valleytronic systems, making such a phenomenon rather rare. In this work, a universal design principle for achieving the LP-AHE from inversion-symmetric single-layer lattices is proposed. Through tight-binding model analysis, we demonstrate that by stacking into antiferromagnetic van der Waals bilayer lattices, the coupling physics between PT symmetry and vertical external bias can be realized. This coupling reveals the previously neutralized layer-locked Berry curvature, compelling the carriers to move in a specific direction within a given layer, thereby realizing the LP-AHE. Intriguingly, the chirality of the LP-AHE can be effectively switched by modulating the direction of vertical external bias. First-principles calculations validate this mechanism in bilayer T-FeCl2 and MnPSe3. Our results pave the way for new explorations of the LP-AHE.

Mitigating Surface Defects in Tin-Based Perovskite Films with α-Tocopherol for Enhanced Photovoltaic Performance.

Surface defects in tin-based perovskite films disrupt the periodic arrangement of atoms in crystals, making surface atoms more susceptible to interactions with water and oxygen molecules in the surrounding environment. The diffusion of oxygen ions into the perovskite interior leads to the formation of severe bulk defects, which compromises the performance of tin-based perovskite solar cells (PSCs). As a result, surface defects are recognized as the primary source of degradation and require special attention. In this study, α-Tocopherol (also known as vitamin E) into tin-based perovskite films is introduced. Experimental results show that because of its larger volume, α-Tocopherol does not enter the perovskite lattice. Instead, it forms van der Waals and hydrogen bond interactions with the formamidine ion (FA+) and the [SnI6]4- octahedron at the perovskite terminals. Through α-Tocopherol passivation, both surface and interior oxidation of the perovskite are significantly suppressed as α-Tocopherol firmly embeds itself on the perovskite surface. Density functional theory analysis confirms the inhibition of I─Sn antisite defects (ISn) and Sn interstitial defects (Sni), which possess deep trap states within the bandgap. Ultimately, it is demonstrated that α-Tocopherol enhances the power conversion efficiency (PCE) from 9.19% to 13.14% and prolongs the lifetime of tin-based PSCs to over 50 days.

Single-Atom Control of Single-Molecule van der Waals Junctions with Semimetallic Transition Metal Dichalcogenide Electrodes.

Electrodes play an essential role in controlling electrode-molecule coupling. However, conventional metal electrodes require linkers to anchor the molecule. Van der Waals interaction offers a versatile strategy to connect the electrode and molecule without anchor groups. Except for graphene, the potential of other materials as electrodes to fabricate van der Waals molecular junctions remains unexplored. Herein, we utilize semimetallic transition metal dichalcogenides (TMDCs) 1T'-WTe2 as electrodes to fabricate WTe2/metalated tetraphenylporphyrin (M-TPP)/WTe2 junctions via van der Waals interaction. Compared with chemically bonded Au/M-TPP/Au junctions, the conductance of these M-TPP van der Waals molecular junctions is enhanced by ∼736%. More importantly, WTe2/M-TPP/WTe2 junctions exhibit the tunable conductance from 10-3.29 to 10-4.44 G0 (1.15 orders of magnitude) via single-atom control, recording the widest tunable range of conductance for M-TPP molecular junctions. Our work demonstrates the potential of two-dimensional TMDCs for constructing highly tunable and conductive molecular devices.

Voltage-Modulated van der Waals Interaction in Single-Molecule Junctions.

Understanding how molecular geometry affects the electronic properties of single-molecule junctions experimentally has been challenging. Typically, metal-molecule-metal junctions are measured using a break-junction method where electrode separation is mechanically evolving during measurement. Here, to probe the impact of the junction geometry on conductance, we apply a sinusoidal modulation to the molecular junction electrode position. Simultaneously, we probe the nonlinearity of the current-voltage characteristics of each junction through a modulation in the applied bias at a different frequency. In turn, we show that junctions formed with molecules that have different molecule-electrode interfaces exhibit statistically distinguishable Fourier-transformed conductances. In particular, we find a marked bias dependence for the modulation of junctions where transmission is mediated thorough the van der Waals (vdW) interaction. We attribute our findings to voltage-modulated vdW interactions at the single-molecule level.

Exchange between Interlayer and Intralayer Exciton in WSe2/WS2 Heterostructure by Interlayer Coupling Engineering.

Because of type-II band alignment, interlayer exciton (IX) is found in a van der Waals (vdW) heterostructure (HS) formed by two monolayers of transition-metal dichalcogenides. Manipulation of IXs is of great importance for excitonic integrated devices. Here, we demonstrate that high pressure and tensile strain can be applied to enhance and reduce interlayer coupling of WSe2/WS2 HS, respectively. High pressure induces the transform of intralayer excitons to IX, while tensile strain leads to the transform of IXs to intralayer excitons. In addition, there is a direct-to-indirect band gap transition of WSe2/WS2 HS. The interlayer distance of WSe2/WS2 HS is reduced under high pressure, but it increased under uniaxial tensile strain from first-principles calculations. The calculated band structures explain well the transformation between interlayer and intralayer excitons of WSe2/WS2 HS. This work demonstrates the exchange of interlayer and intralayer excitons and paves the way to manipulate excitons of HS for excitonic applications.

Independent gradient model based on Hirshfeld partition: A new method for visual study of interactions in chemical systems.

The powerful independent gradient model (IGM) method has been increasingly popular in visual analysis of intramolecular and intermolecular interactions in recent years. However, we frequently observed that there is an evident shortcoming of IGM map in graphically studying weak interactions, that is its isosurfaces are usually too bulgy; in these cases, not only the graphical effect is poor, but also the color on some areas on the isosurfaces is inappropriate and may lead to erroneous analysis conclusions. In addition, the IGM method was originally proposed based on promolecular density, which is quite crude and does not take actual electronic structure into account. In this article, we propose an improvement version of IGM, namely IGM based on Hirshfeld partition of molecular density (IGMH), which replaces the free-state atomic densities involved in the IGM method with the atomic densities derived by Hirshfeld partition of actual molecular electron density. This change makes IGM have more rigorous physical background. A large number of application examples in this article, including molecular and periodic systems, weak and chemical bond interactions, fully demonstrate the important value of IGMH in intuitively understanding interactions in chemical systems. Comparisons also showed that the IGMH usually has markedly better graphical effect than IGM and overcomes known problems in IGM. Currently IGMH analysis has been supported in our wavefunction analysis code Multiwfn (http://sobereva.com/multiwfn). We hope that IGMH will become a new useful method among chemists for exploring interactions in wide variety of chemical systems.

Insight into the stacking and the species-ordering dependences of interlayer bonding in SiC/GeC polar heterostructures.

Two-dimensional (2D) polar materials experience an in-plane charge transfer between different elements due to their electron negativities. When they form vertical heterostructures, the electrostatic force triggered by such charge transfer plays an important role in the interlayer bonding beyond van der Waals (vdW) interaction. Our comprehensive first principle study on the structural stability of the 2D SiC/GeC hybrid bilayer heterostructure has found that the electrostatic interlayer interaction can induce theπ-πorbital hybridization between adjacent layers under different stacking and out-of-plane species ordering, with strong hybridization in the cases of Si-C and C-Ge species orderings but weak hybridization in the case of the C-C ordering. In particular, the attractive electrostatic interlayer interaction in the cases of Si-C and C-Ge species orderings mainly controls the equilibrium interlayer distance and the vdW interaction makes the system attain a lower binding energy. On the contrary, the vdW interaction mostly controls the equilibrium interlayer distance in the case of the C-C species ordering and the repulsive electrostatic interlayer force has less effect. Interesting finding is that the band structure of the SiC/GeC hybrid bilayer is sensitive to the layer-layer stacking and the out-of-plane species ordering. An indirect band gap of 2.76 eV (or 2.48 eV) was found under the AA stacking with Si-C ordering (or under the AB stacking with C-C ordering). While a direct band gap of 2.00-2.88 eV was found under other stacking and species orderings, demonstrating its band gap tunable feature. Furthermore, there is a charge redistribution in the interfacial region leading to a built-in electric field. Such field will separate the photo-generated charge carriers in different layers and is expected to reduce the probability of carrier recombination, and eventually give rise to the electron tunneling between layers.

Science of 2.5 dimensional materials: paradigm shift of materials science toward future social innovation.

The past decades of materials science discoveries are the basis of our present society - from the foundation of semiconductor devices to the recent development of internet of things (IoT) technologies. These materials science developments have depended mainly on control of rigid chemical bonds, such as covalent and ionic bonds, in organic molecules and polymers, inorganic crystals and thin films. The recent discovery of graphene and other two-dimensional (2D) materials offers a novel approach to synthesizing materials by controlling their weak out-of-plane van der Waals (vdW) interactions. Artificial stacks of different types of 2D materials are a novel concept in materials synthesis, with the stacks not limited by rigid chemical bonds nor by lattice constants. This offers plenty of opportunities to explore new physics, chemistry, and engineering. An often-overlooked characteristic of vdW stacks is the well-defined 2D nanospace between the layers, which provides unique physical phenomena and a rich field for synthesis of novel materials. Applying the science of intercalation compounds to 2D materials provides new insights and expectations about the use of the vdW nanospace. We call this nascent field of science '2.5 dimensional (2.5D) materials,' to acknowledge the important extra degree of freedom beyond 2D materials. 2.5D materials not only offer a new field of scientific research, but also contribute to the development of practical applications, and will lead to future social innovation. In this paper, we introduce the new scientific concept of this science of '2.5D materials' and review recent research developments based on this new scientific concept.

Fullerene Derivatives (CN-[OH]ß) and Single-Walled Carbon Nanotubes Modelled as Transporters for Doxorubicin Drug in Cancer Therapy.

Carbon nanomaterials have received increasing attention in drug-delivery applications because of their distinct properties and structures, including large surface areas, high conductivity, low solubility in aqueous media, unique chemical functionalities, and stability at the nano-scale size. Particularly, they have been used as nano-carriers and mediators for anticancer drugs such as Cisplatin, Camptothecin, and Doxorubicin. Cancer has become the most challenging disease because it requires sophisticated therapy, and it is classified as one of the top killers according to the World Health Organization records. The aim of the current work is to study and investigate the mechanism of combination between single-walled carbon nanotubes (SWCNTs) and fullerene derivatives (CN-[OH]ß) as mediators, and anticancer agents for photodynamic therapy directly to destroy the infected cells without damaging the normal ones. Here, we obtain a bio-medical model to determine the efficiency of the usefulness of Doxorubicin (DOX) as an antitumor agent conjugated with SWCNTs with variant radii r and fullerene derivative (CN-[OH]ß). The two sub-models are obtained mathematically to evaluate the potential energy arising from the DOX-SWCNT and DOX-(CN-[OH]ß) interactions. DOX modelled as two-connected spheres, small and large, each interacting with different SWCNTs (variant radii r) and fullerene derivatives CN-[OH]ß, formed based on the number of carbon atoms (N) and the number of hydroxide molecules (OH) (ß), respectively. Based on our obtained results, we find that the most favorable carbon nanomaterial is the SWCNT (r = 15.27 Å), followed by fullerene derivatives CN-(OH)22, CN-(OH)20, and CN-(OH)24, with minimum energies of -38.27, -33.72, -32.95, and -29.11 kcal/mol.

Matrix Isolation FTIR and Theoretical Study of Weakly Bound Complexes of Isocyanic Acid with Nitrogen.

Weak complexes of isocyanic acid (HNCO) with nitrogen were studied computationally employing MP2, B2PLYPD3 and B3LYPD3 methods and experimentally by FTIR matrix isolation technique. The results show that HNCO interacts specifically with N2. For the 1:1 stoichiometry, three stable minima were located on the potential energy surface. The most stable of them involves a weak, almost linear hydrogen bond from the NH group of the acid molecule to nitrogen molecule lone pair. Two other structures are bound by van der Waals interactions of N⋯N and C⋯N types. The 1:2 and 2:1 HNCO complexes with nitrogen were computationally tracked as well. Similar types of interactions as in the 1:1 complexes were found in the case of the higher stoichiometry complexes. Analysis of the HNCO/N2/Ar spectra after deposition indicates that the 1:1 hydrogen-bonded complex is prevalent in argon matrices with a small amount of the van der Waals structures also present. Upon annealing, complexes of the 1:2 and 2:1 stoichiometry were detected as well.

Modified Protein-Water Interactions in CHARMM36m for Thermodynamics and Kinetics of Proteins in Dilute and Crowded Solutions.

Proper balance between protein-protein and protein-water interactions is vital for atomistic molecular dynamics (MD) simulations of globular proteins as well as intrinsically disordered proteins (IDPs). The overestimation of protein-protein interactions tends to make IDPs more compact than those in experiments. Likewise, multiple proteins in crowded solutions are aggregated with each other too strongly. To optimize the balance, Lennard-Jones (LJ) interactions between protein and water are often increased about 10% (with a scaling parameter, λ = 1.1) from the existing force fields. Here, we explore the optimal scaling parameter of protein-water LJ interactions for CHARMM36m in conjunction with the modified TIP3P water model, by performing enhanced sampling MD simulations of several peptides in dilute solutions and conventional MD simulations of globular proteins in dilute and crowded solutions. In our simulations, 10% increase of protein-water LJ interaction for the CHARMM36m cannot maintain stability of a small helical peptide, (AAQAA)3 in a dilute solution and only a small modification of protein-water LJ interaction up to the 3% increase (λ = 1.03) is allowed. The modified protein-water interactions are applicable to other peptides and globular proteins in dilute solutions without changing thermodynamic properties from the original CHARMM36m. However, it has a great impact on the diffusive properties of proteins in crowded solutions, avoiding the formation of too sticky protein-protein interactions.

Matter-Aggregating Low-Dimensional Nanostructures at the Edge of the Classical vs. Quantum Realm.

This commentary tackles the subtle at-the-edge problem of passing locally by a mesoscopic matter-aggregating system from a classical stochastic to a quantum stochastic description. A d-dimensional entropy-productive aggregation of the matter is taken as the starting point. Then, a dimensional reduction towards a one-dimensional quantum-wire type matter-aggregation system is proposed, resulting in postponing surface-tension conditions for the effectively d = 1-dimensional quantum-wire type or nanorod-like cluster/polycrystal, which is qualitatively consistent with a physical-metallurgical (high-temperature) Louat's grain growth model. A certain recuperative interplay based on maneuvering between subtle temperature rises applied to the system under study while maintaining its quantum character (the so-called Nelson's quantum-stochastic procedure) within the limits of a vanishing Planck's constant, involved in the diffusivity measure of the aggregation, is discussed. Certain applications towards the formation of d = 1-dimensional semiconductors and other nanostructures (possibly using soft materials or (bio)polymeric materials such as nanofibers) are envisioned. As a special example, one may propose a nanotechnological process which is termed the Van der Waals heteroepitaxy. The process itself contains the main quantum vs. classical crossover due to the involvement of weak repulsion (quantum) vs. attraction (treated classically) interactions, which are represented by a Lennard-Jones-type potential.

SuFEx-Enabled Elastic Polysulfates for Efficient Removal of Radioactive Iodomethane and Polar Aprotic Organics through Weak Intermolecular Forces.

Capturing radioactive iodomethane and its vapors is a major challenge due to its low adsorption capacity. Herein, we have developed for the first time a pyridine-entrapped elastic crosslinked polysulfate gel (pyridine/TPC-cPS) as an efficient absorbent for iodomethane capture. Each pyridine-encased TPC-cPS network cell acts as a mini-reactor for salt formation between pyridine and iodomethane. The yield reaches up to 96.65 % and traps saturated iodomethane vapor of 1.573 g gpyridine/TPC-cPS -1 (equivalent to 18.103 g gTPC-cPS -1 ), which is the highest capacity reported to date. Both experiments and molecular dynamics simulations reveal that the unusual adsorption of polysulfate for polar aprotic organics can be attributed to the fact that the electrostatic interactions between the polar group (O=S=O) in the polymer backbone and the polar groups in the organic molecules fixed the solvent in the polymer matrix, while the van der Waals forces between the nonpolar groups in the polymer and molecules induced swelling.

Structure and IR Spectroscopic Properties of HNCO Complexes with SO2 Isolated in Solid Argon.

FTIR spectroscopy was combined with the matrix isolation technique and quantum chemical calculations with the aim of studying complexes of isocyanic acid with sulfur dioxide. The structures of the HNCO⋯SO2 complexes of 1:1, 1:2 and 2:1 stoichiometry were optimized at the MP2, B3LYPD3, B2PLYPD3 levels of theory with the 6-311++G(3df,3pd) basis set. Five stable 1:1 HNCO⋯SO2 complexes were found. Three of them contain a weak N-H⋯O hydrogen bond, whereas two other structures are stabilized by van der Waals interactions. The analysis of the HNCO/SO2/Ar spectra after deposition indicates that mostly the 1:1 hydrogen-bonded complexes are present in argon matrices, with a small amount of the van der Waals structures. Upon annealing, complexes of the 1:2 stoichiometry were detected, as well.

Predicting whether aromatic molecules would prefer to enter a carbon nanotube: A density functional theory study.

The interaction of a carbon nanotube (CNT) with various aromatic molecules, such as aniline, benzophenone, and diphenylamine, was studied using density functional theory able to compute intermolecular weak interactions (B3LYP-D3). CNTs of varying lengths were used, such as 4-CNT, 6-CNT, and 8-CNT (the numbers denoting relative lengths), with the lengths being chosen appropriately to save computation times. All aromatic molecules were found to exhibit strong intermolecular binding energies with the inner surface of the CNT, rather than the outer surface. Hydrogen bonding between two aromatic molecules that include N and O atoms is shown to further stabilize the intermolecular adsorption process. Therefore, when benzophenone and diphenylamine were simultaneously allowed to interact with a CNT, the aromatic molecules were expected to preferably enter the CNT. Furthermore, additional calculations of the intermolecular adsorption energy for aniline adsorbed on a graphene surface showed that the concavity of graphene-like carbon sheet is in proportion to the intermolecular binding energy between the graphene-like carbon sheet and the aromatic molecule.

Properties of real metallic surfaces: Effects of density functional semilocality and van der Waals nonlocality.

We have computed the surface energies, work functions, and interlayer surface relaxations of clean (111), (100), and (110) surfaces of Al, Cu, Ru, Rh, Pd, Ag, Pt, and Au. We interpret the surface energy from liquid metal measurements as the mean of the solid-state surface energies over these three lowest-index crystal faces. We compare experimental (and random phase approximation) reference values to those of a family of nonempirical semilocal density functionals, from the basic local density approximation (LDA) to our most advanced general purpose meta-generalized gradient approximation, strongly constrained and appropriately normed (SCAN). The closest agreement is achieved by the simplest density functional LDA, and by the most sophisticated one, SCAN+rVV10 (Vydrov-Van Voorhis 2010). The long-range van der Waals interaction, incorporated through rVV10, increases the surface energies by about 10%, and increases the work functions by about 3%. LDA works for metal surfaces through two known error cancellations. The Perdew-Burke-Ernzerhof generalized gradient approximation tends to underestimate both surface energies (by about 24%) and work functions (by about 4%), yielding the least-accurate results. The amount by which a functional underestimates these surface properties correlates with the extent to which it neglects van der Waals attraction at intermediate and long range. Qualitative arguments are given for the signs of the van der Waals contributions to the surface energy and work function. A standard expression for the work function in Kohn-Sham (KS) theory is shown to be valid in generalized KS theory. Interlayer relaxations from different functionals are in reasonable agreement with one another, and usually with experiment.

All-Dry Transfer of Graphene Film by van der Waals Interactions.

We report a method that uses van der Waals interactions to transfer continuous, high-quality graphene films from Ge(110) to a different substrate held by hexagonal boron nitride carriers in a clean, dry environment. The transferred films are uniform and continuous with low defect density and few charge puddles. The transfer is effective because of the weak interfacial adhesion energy between graphene and Ge. Based on the minimum strain energy required for the isolation of film, the upper limit of the interfacial adhesion energy is estimated to be 23 meV per carbon atom, which makes graphene/Ge(110) the first as-grown graphene film that has a substrate adhesion energy lower than that of typical van der Waals interactions between layered materials. Our results suggest that graphene on Ge can serve as an ideal material platform to be integrated with other material systems by a clean assembly process.

Molecular dynamics simulation of tropomyosin bound to actins/myosin in the closed and open states.

Tropomyosin (Tpm) is a dimeric coiled-coil protein that binds to filamentous actin, and regulates actin-myosin interaction by moving between three positions corresponding to the blocked, closed, and open states. To elucidate how Tpm undergoes transitions between these functional states, we have built structural models and conducted extensive molecular dynamics simulations of the Tpm-actins/myosin complex in the closed and open states (total simulation time >1.4 µs). Based on the simulation trajectories, we have analyzed the dynamics and energetics of a truncated Tpm interacting with actins/myosin under the physiological conditions. Our simulations have shown distinct dynamics of four Tpm periods (P3-P6), featuring pronounced biased fluctuations of P4 and P5 toward the open position in the closed state, which is consistent with a conformational selection mechanism for Tpm-regulated myosin binding. Additionally, we have identified key residues of Tpm specifically binding to actins/myosin in the closed and open state. Some of them were validated as functionally important in comparison with past functional/clinical studies, and the rest will make promising targets for future mutational experiments.

Efficient Planar Perovskite Solar Cells with Improved Fill Factor via Interface Engineering with Graphene.

Organic-inorganic hybrid lead halide perovskites have been widely investigated in optoelectronics both experimentally and theoretically. The present work incorporates chemically modified graphene into nanocrystal SnO2 as the electron transporting layer (ETL) for highly efficient planar perovskite solar cells. The modification of SnO2 with highly conductive two-dimensional naphthalene diimide-graphene can increase surface hydrophobicity and form van der Waals interaction between the surfactant and the organic-inorganic hybrid lead halide perovskite compounds. As a result, highly efficient perovskite solar cells with power conversion efficiency of 20.2% can be achieved with an improved fill factor of 82%, which could be mainly attributed to the augmented charge extraction and transport.

Correlational Effects of the Molecular-Tilt Configuration and the Intermolecular van der Waals Interaction on the Charge Transport in the Molecular Junction.

Molecular conformation, intermolecular interaction, and electrode-molecule contacts greatly affect charge transport in molecular junctions and interfacial properties of organic devices by controlling the molecular orbital alignment. Here, we statistically investigated the charge transport in molecular junctions containing self-assembled oligophenylene molecules sandwiched between an Au probe tip and graphene according to various tip-loading forces ( FL) that can control the molecular-tilt configuration and the van der Waals (vdW) interactions. In particular, the molecular junctions exhibited two distinct transport regimes according to the FL dependence (i.e., FL-dependent and FL-independent tunneling regimes). In addition, the charge-injection tunneling barriers at the junction interfaces are differently changed when the FL ≤ 20 nN. These features are associated to the correlation effects between the asymmetry-coupling factor (η), the molecular-tilt angle (θ), and the repulsive intermolecular vdW force ( FvdW) on the molecular-tunneling barriers. A more-comprehensive understanding of these charge transport properties was thoroughly developed based on the density functional theory calculations in consideration of the molecular-tilt configuration and the repulsive vdW force between molecules.