RESUMO
BACKGROUND: The production of Pleurotus ostreatus mycelium as a promising object for use in food and other industries is hampered by a lack of information about the strain-specificity of this fungus mycelium growth and its acquisition of various biological activities. Therefore, this research aimed to investigate mycelial growth of different P. ostreatus strains on varies solid and liquid media as well as to evaluate strains antagonistic, antibacterial, antiradical scavenging activities, and total phenolic content. RESULTS: Potato Dextrose Agar medium was suitable for all strains except P. ostreatus strain 2460. The best growth rate of P. ostreatus 2462 strain on solid culture media was 15.0 ± 0.8 mm/day, and mycelia best growth on liquid culture media-36.5 ± 0.2 g/l. P. ostreatus strains 551 and 1685 were more susceptible to positive effect of plant growth regulators Ivin, Methyur and Kamethur. Using of nutrient media based on combination of natural waste (amaranth flour cake and wheat germ, wheat bran, broken vermicelli and crumbs) has been increased the yield of P. ostreatus strains mycelium by 2.2-2.9 times compared to the control. All used P. ostreatus strains displayed strong antagonistic activity in co-cultivation with Aspergillus niger, Candida albicans, Issatchenkia orientalis, Fusarium poae, Microdochium nivale in dual-culture assay. P. ostreatus 2462 EtOAc mycelial extract good inhibited growth of Escherichia coli (17.0 ± 0.9 mm) while P. ostreatus 2460 suppressed Staphylococcus aureus growth (21.5 ± 0.5 mm) by agar well diffusion method. The highest radical scavenging effect displayed both mycelial extracts (EtOH and EtOAc) of P. ostreatus 1685 (61 and 56%) by DPPH assay as well as high phenolic content (7.17 and 6.73 mg GAE/g) by the Folin-Ciocalteu's method. The maximal total phenol content (7.52 mg GAE/g) demonstrated of P. ostreatus 2461 EtOH extract. CONCLUSIONS: It is found that the growth, antibacterial, antiradical scavenging activity as well as total phenolic content were dependent on studied P. ostreatus strains in contrast to antagonistic activity. The proposed culture mediums of natural waste could be an alternative to commercial mediums for the production mycelial biomass of P. ostreatus strains.
Assuntos
Pleurotus , Ágar/análise , Ágar/farmacologia , Antibacterianos/farmacologia , Meios de Cultura/química , Extratos Vegetais/farmacologia , MicélioRESUMO
Within the global trend to valorise various mineral wastes as substituents in Portland cement clinker raw feed, mining wastes are promising candidates. However, they might still contain high levels of metallic elements. Their fate in the kiln is not always understood as well as their incorporation within the various clinker's phases. This is especially the case for antimony. Its in situ microanalysis by the means of energy-dispersive spectroscopy is tricky since several of its L lines (Lα1 = 3604,72 eV, Lα2 = 3595,32 eV) overlap with calcium lines (Kα1 = 3691,68 eV, Kα2 = 3688,09 eV). Hence, at low concentrations, it is not possible to visualise its characteristics peaks. Increasing the counting rate by increasing the acceleration current results in the generation of spurious sum peaks, rendering the analysis not viable. Wavelength dispersive spectroscopy (i.e. electron microprobe) allows a better spectral resolution and quantification of Sb in the clinker phases. In a Portland cement clinker doped with 1% of Sb-bearing mining waste, the Sb2O3 content in belite and alite is in the 0.2-0.4 wt.% range as well as for C3A; in C4AF the content is higher, from 1.4 wt.% to 2 wt.%. However, there are microstructural evidence that Sb forms blebs from less than 1 µm in diameter up to 10 µm, included in calcium silicates. Hence, its incorporation in the lattice of calcium silicates is dubious. However, for ferrites and aluminates there is no microstructural evidence for remaining Sb-bearing phases, suggesting a direct incorporation in crystal lattices.
RESUMO
BACKGROUND: Cellulase is considered a group member of the hydrolytic enzymes, responsible for catalyzing the hydrolysis of cellulose and has various industrial applications. Agricultural wastes are used as an inexpensive source for several utilizable products throughout the world. So, searching for cellulase enzymes from fungal strains capable of utilizing agricultural wastes to increase productivity, reduce costs and overcome waste accumulation in the environment is very important to evaluate its potency as a bio-additive to detergent agents. RESULTS: In the current study, the previously identified fungal strain Aspergillus terreus MN901491 was screened and selected for cellulase production. Medium parameters were optimized using one-factor-at-a-time (OFAT) and multi-factorial (Plackett-Burman and Box-Behnken) design methods. OFAT showed the ability of the fungal strain to utilize agricultural wastes (corn cob and rice straw) as a substrate. Also, yeast extract was the best nitrogen source for enhancing cellulase productivity. The most significant variables were determined by Plackett-Burman Design (PBD) and their concentrations were optimized by Response Surface Methodology (RSM) using Box-Behnken Design (BBD). Among eleven independent variables screened by PBD, malt extract, (NH4)2SO4, and KCl were the most significant ones followed by rice straw which affected cellulase production positively. The ANOVA results particularly the R2-value of PBD (0.9879) and BBD (0.9883) confirmed the model efficiency and provided a good interpretation of the experiments. PBD and BBD improved cellulase productivity by 6.1-fold greater than that obtained from OFAT. Medium optimization using OFAT and statistical models increased cellulase production from A. terreus MN901491 by 9.3-fold compared to the non-optimized medium. Moreover, the efficiency of cellulase activity on cotton fabrics as a bio-additive detergent was evaluated and estimated using whiteness and scanning electron microscope (SEM) that affirmed its potential effect and remarkable detergent ability to improve whiteness by 200% in comparison with non-washed fabric and by 190% in comparison with fabric washed by water. CONCLUSION: The presented work was stabilized as a multi-efficiency in which wastes were used to produce cellulase enzyme from the fungal strain, Aspergillus terreus MN901491 as a bio-additive to detergent applications that involved ecofriendly and green processes.
Assuntos
Celulase , Oryza , Detergentes , Aspergillus , Projetos de PesquisaRESUMO
BACKGROUND: Chitinases are widely distributed enzymes that perform the biotransformation of chitin, one of the most abundant polysaccharides on the biosphere, into useful value-added chitooligosaccharides (COS) with a wide variety of biotechnological applications in food, health, and agricultural fields. One of the most important group of enzymes involved in the degradation of chitin comprises the glycoside hydrolase family 18 (GH18), which harbours endo- and exo-enzymes that act synergistically to depolymerize chitin. The secretion of a chitinase activity from the ubiquitous yeast Mestchnikowia pulcherrima and their involvement in the post-harvest biological control of fungal pathogens was previously reported. RESULTS: Three new chitinases from M. pulcherrima, MpChit35, MpChit38 and MpChit41, were molecularly characterized and extracellularly expressed in Pichia pastoris to about 91, 90 and 71 mU ml- 1, respectively. The three enzymes hydrolysed colloidal chitin with optimal activity at 45 ºC and pH 4.0-4.5, increased 2-times their activities using 1 mM of Mn2+ and hydrolysed different types of commercial chitosan. The partial separation and characterization of the complex COS mixtures produced from the hydrolysis of chitin and chitosan were achieved by a new anionic chromatography HPAEC-PAD method and mass spectrometry assays. An overview of the predicted structures of these proteins and their catalytic modes of action were also presented. Depicted their high sequence and structural homology, MpChit35 acted as an exo-chitinase producing di-acetyl-chitobiose from chitin while MpChit38 and MpChit41 both acted as endo-chitinases producing tri-acetyl-chitotriose as main final product. CONCLUSIONS: Three new chitinases from the yeast M. pulcherrima were molecularly characterized and their enzymatic and structural characteristics analysed. These enzymes transformed chitinous materials to fully and partially acetylated COS through different modes of splitting, which make them interesting biocatalysts for deeper structural-function studies on the challenging enzymatic conversion of chitin.
Assuntos
Quitinases , Quitosana , Quitina/química , Quitinases/genética , Quitinases/química , Proteínas , Saccharomyces cerevisiae/metabolismoRESUMO
BACKGROUND: The demand for low-cost cellulolytic enzyme synthesis is rising in the enzyme market. This work aims to produce cellulase by utilizing various agricultural wastes and investigating the use of enzyme in saccharification and textile industries. RESULTS: Solid state fermentation (SSF) was applied to produce industrial enzymes, particularly cellulase, through utilizing Molokhia (Corchorus olitorius) stems by Aspergillus awamori MK788209 isolate. Two stages of statistical factorial designs Plackett-Burman (PB) and Central Composite Design (CCD) were applied to enhance the A. awamori MK788209 cellulase production from Molokhia stems (MS). The fold increase of enzyme production by PB followed by CCD was 2.51 and 4.86, respectively. Additionally, the A. awamori MK788209 culture filtrate was highly effective in saccharifying various agricultural wastes, particularly pea peels (PP) (yielding 98.33 mg reducing sugar/ml), due to its richness in cellulase, laccase, xylanase, pectinase, and amylase. By optimizing the three main variables; pea peel weight, culture filtrate volume added, and saccharification time by CCD, the sugar recovery from PP was enhanced, leading to a 3.44-fold increase in reducing sugar recovery (338 mg reducing sugar /ml). Furthermore, the A. awamori MK788209 culture filtrate showed high efficacy in textile applications, enhancing the roughness, weight loss, white index, and printing capability of treated cotton fabrics. CONCLUSIONS: A. Awamori MK788209 produced cellulase which was effective in PP saccharification. The enzyme was also capable of enhancing cotton fabric properties.
Assuntos
Celulase , Pisum sativum , Têxteis , AçúcaresRESUMO
Enhanced weathering and mineralization (EWM) aim to remove carbon dioxide (CO2) from the atmosphere by accelerating the reaction of this greenhouse gas with alkaline minerals. This suite of geochemical negative emissions technologies has the potential to achieve CO2 removal rates of >1 gigatonne per year, yet will require gigatonnes of suitable rock. As a supplier of rock powder, the mining industry will be at the epicenter of the global implementation of EWM. Certain alkaline mine wastes sequester CO2 under conventional mining conditions, which should be quantified across the industry. Furthermore, mines are ideal locations for testing acceleration strategies since tailings impoundments are contained and highly monitored. While some environmentally benign mine wastes may be repurposed for off-site useâreducing costs and risks associated with their storageânumerous new mines will be needed to supply rock powders to reach the gigatonne scale. Large-scale EWM pilots with mining companies are required to progress technology readiness, including carbon verification approaches. With its knowledge of geological formations and ore processing, the mining industry can play an essential role in extracting the most reactive rocks with the greatest CO2 removal capacities, creating supply chains, and participating in life-cycle assessments. The motivations for mining companies to develop EWM include reputational benefits and carbon offsets needed to achieve carbon neutrality.
Assuntos
Dióxido de Carbono , Tempo (Meteorologia) , Minerais , Atmosfera , MineraçãoRESUMO
Wheat is a major grain crop of the world that provides a stable food for human consumption. Large amounts of by-products/waste materials are produced after the harvesting and processing of wheat crop. Such materials can cause an environmental issue if not disposed of properly. Several studies have shown that wheat residues can be efficient precursors for adsorbents because of their availability, renewability, lignocellulosic composition, and surface active groups enriched structure. In the literature, there are few review articles that address wheat residues-based adsorbents. However, these reviews were specific in terms of adsorbate or adsorbent and did not provide detailed information about the modification, properties, and regeneration of these adsorbents. This article extensively reviews the utilization of wheat biomass/waste including straw, bran, husk, and stalk as precursors for raw or untreated, chemically treated, carbonaceous, and composite adsorbents against various environmental pollutants. The influences of inlet pollutant amount, adsorbent dose, pH, temperature, and time on the performance of adsorbents against pollutants were considered. The maximum uptakes, equilibrium time, and adsorption nature were identified from isotherms, kinetic, and thermodynamic studies. The highest adsorbed amounts of most tested contaminants were 448.20, 322.58, and 578.13 mg/g for lead, chromium, and copper, 1374.6 and 1449.4 mg/g for methylene blue and malachite green, and 854.75, 179.21, and 107.77 mg/g for tetracycline, phosphate, and nitrate, respectively. For the studied adsorbate/adsorbent systems the adsorption mechanism and regeneration were also discussed. Significant results and future directions are finally presented.
Assuntos
Recuperação e Remediação Ambiental , Triticum , Poluentes Químicos da Água , Adsorção , Recuperação e Remediação Ambiental/métodos , Triticum/química , Poluentes Químicos da Água/química , Poluentes Químicos da Água/análise , Purificação da Água/métodosRESUMO
Cellulase is a new research point besides glucoamylase, amylase, and protease in the enzyme industry. Cellulase can decompose lignocellulosic biomass into small-molecule sugars, which facilitates microbial utilization; thus, it has a vast market potential in the field of feed, food, energy, and chemistry. The Aspergillus was the first strain used in cellulase preparation because of its safety and non-toxicity, strong growth ability, and high enzyme yield. This review provides the latest research and advances on preparing cellulase from Aspergillus. The metabolic mechanisms of cellulase secretion by Aspergillus, the selection of fermentation substrates, the comparison of the fermentation modes, and the effect of fermentation conditions have been discussed in this review. Also, the subsequent separation and purification techniques of Aspergillus cellulase, including salting out, organic solvent precipitation, ultrafiltration, and chromatography, have been declared. Further, bottlenecks in Aspergillus cellulase preparation and corresponding feasible approaches, such as genetic engineering, mixed culture, and cellulase immobilization, have also been proposed in this review. This paper provides theoretical support for the efficient production and application of Aspergillus cellulase.
Assuntos
Celulase , Celulase/genética , Celulase/metabolismo , Aspergillus/genética , Aspergillus/metabolismo , FermentaçãoRESUMO
Supercritical water oxidation (SCWO) has been regarded as a new and efficient technology for the harmless treatment and energy utilization of organic wastes, resulting in the quickly homogeneous oxidation between organics and oxidizers and the former being wholly degraded into small environment-friendly green molecules such as H2O and N2 and inorganic salts. This paper systematically analyzed the influencing behavior and mechanisms of the reaction factors, such as temperature, pressure, residence time, oxidant type, oxidation coefficient, and the concentration and pH values of the raw material, on the treatment effect of organic wastes. For most organic wastes, the SCWO conditions at 550 °C with a residence time of 1min and an oxidation coefficient of 100% can meet the removal rate of more than 99%. To further enhance the degradation rate of organics, the principles, implementation cases, and related equipment components of general enhancement technologies of supercritical water oxidation were discussed, such as fractional oxygen injection, auxiliary fuel co-oxidation, and hydrothermal flame-assisted degradation. This paper proposes a novel supercritical flame-assisted oxidation process in which the reactor performs preheating, corrosion protection, and desalination functions. The use of additive-enhanced oxidation, segmented oxidation, and supercritical hydrothermal flame-assisted oxidation has achieved good results in the complicated treatment process of brutal degradation of organic matter.
Assuntos
Oxirredução , Água , Água/química , Compostos Orgânicos/química , Eliminação de Resíduos Líquidos/métodos , TemperaturaRESUMO
Anaerobic fermentation of organic waste to produce volatile fatty acids (VFAs) production is a relatively mature technology. VFAs can be used as a cheap and readily available carbon source by photosynthetic bacteria (PSB) to produce high value-added products, which are widely used in various applications. To better enhance the VFAs obtained from organic wastes for PSB to produce high value-added products, a comprehensive review is needed, which is currently not available. This review systematically summarizes the current status of microbial proteins, H2, poly-ß-hydroxybutyrate (PHB), coenzyme Q10 (CoQ10), and 5-aminolevulinic acid (ALA) production by PSB utilizing VFAs as a carbon resource. Meanwhile, the metabolic pathways involved in the H2, PHB, CoQ10, and 5-ALA production by PSB were deeply explored. In addition, a systematic resource utilization pathway for PSB utilizing VFAs from anaerobic fermentation of organic wastes to produce high value-added products was proposed. Finally, the current challenges and priorities for future research were presented, such as the screening of efficient PSB strains, conducting large-scale experiments, high-value product separation, recovery, and purification, and the mining of metabolic pathways for the VFA utilization to generate high value-added products by PSB.
Assuntos
Ácidos Graxos Voláteis , Bactérias Gram-Negativas , Ácidos Graxos Voláteis/metabolismo , Fermentação , Anaerobiose , Bactérias Gram-Negativas/metabolismo , Carbono/metabolismo , Reatores Biológicos , Concentração de Íons de Hidrogênio , EsgotosRESUMO
Polyethelene terephthalate (PET) is a well-known thermoplastic, and recycling PET waste is important for the natural environment and human health. This study provides a comprehensive overview of the recycling and reuse of PET waste through energy recovery and physical, chemical, and biological recycling. This article summarizes the recycling methods and the high-value products derived from PET waste, specifically detailing the research progress on regenerated PET prepared by the mechanical recycling of fiber/yarn, fabric, and composite materials, and introduces the application of PET nanofibers recycled by physical dissolution and electrospinning in fields such as filtration, adsorption, electronics, and antibacterial materials. This article explains the energy recovery of PET through thermal decomposition and comprehensively discusses various chemical recycling methods, including the reaction mechanisms, catalysts, conversion efficiencies, and reaction products, with a brief introduction to PET biodegradation using hydrolytic enzymes provided. The analysis and comparison of various recycling methods indicated that the mechanical recycling method yielded PET products with a wide range of applications in composite materials. Electrospinning is a highly promising recycling strategy for fabricating recycled PET nanofibers. Compared to other methods, physical recycling has advantages such as low cost, low energy consumption, high value, simple processing, and environmental friendliness, making it the preferred choice for the recycling and high-value utilization of waste PET.
Assuntos
Polietilenotereftalatos , Reciclagem , Polietilenotereftalatos/química , Reciclagem/métodos , Biodegradação AmbientalRESUMO
With the advent of the second industrial revolution, mining and metallurgical processes generate large volumes of tailings and mine wastes (TMW), which worsens global environmental pollution. Studying the occurrence of metal and metalloid elements in TMW is an effective approach to evaluating pollution linked to TMW. However, traditional laboratory-based measurements are complicated and time-consuming; thus, an empirical method is urgently needed that can rapidly and accurately determine elemental occurrence forms. In this study, a model combining Bayesian optimization and random forest (RF) approaches was proposed to predict TMW occurrence forms. To build the RF model, a dataset of 2376 samples was obtained, with mineral composition, elemental properties, and total concentration composition used as inputs and the percentage of occurrence forms as the model output. The correlation coefficient (R), coefficient of determination, mean absolute error, root mean squared error, and root mean squared logarithmic error metrics were used for model evaluation. After Bayesian optimization, the optimal RF model achieved accurate predictive performance, with R values of 0.99 and 0.965 on the training and test sets, respectively. The feature significance was analyzed using feature importance and Shapley additive explanatory values, which revealed that the electronegativity and total concentration of the elements were the two features with the greatest influence on the model output. As the electronegativity of an element increases, its corresponding residual fraction content gradually decreases. This is because the solubility typically increases with the solvent's polarity and electronegativity. Overall, this study proposes an RF model based on the nature of TMW that can rapidly and accurately predict the percentage values of metal and metalloid element occurrence forms in TMW. This method can minimize testing time requirements and help to assess TMW pollution risks, as well as further promote safe TMW management and recycling.
Assuntos
Inteligência Artificial , Teorema de Bayes , Mineração , Resíduos Industriais/análise , Monitoramento Ambiental/métodos , Metais/análiseRESUMO
Environmental management relies on many types of information before making decisions regarding remediation, restoration, or other land use decisions, including ecological data, such as risks to species, populations, communities, and ecosystems. The aim of this investigation was to describe the ecological information required within the context of making environmental decisions and providing visual communication tools for regulators, conservationists, and the public to understand the risk to ecological resources on- and off-site. It is suggested that ecological information used in environmental decisions is required to be transparent throughout the planning and execution of a project, which needs to include: 1) ecological information and evaluations within development areas or units (in this case, watersheds), and 2) resources in adjacent areas (Buffer Zones) that might be affected. The Melton Valley administrative watershed (Oak Ridge Reservation, TN) is used as a case study because this site still has active facility development and environmental remediation, and there are important ecological resources on and off-site. Data indicate that although there are important resources on Melton Valley administrative watershed, there are also significant resources in the Buffer Zone around the watershed. Compared to the Melton Valley administrative watershed, the Buffer Zone contains more Interior (and Buffer) Forest and greater value resources. The point is made that when remediation, restoration, or development occurs, it is equally important to consider resources that are adjacent to the site in a Buffer Zone, particularly when remediation and development might continue for many years or decades.
Assuntos
Ecossistema , Recuperação e Remediação Ambiental , Conservação dos Recursos NaturaisRESUMO
Black soldier fly larvae (BSFL), Hermetia illucens L., are widely used to reduce the mass of various wastes. However, the potential metal tolerance mechanisms during periods of waste bioconversion by BSFL remain largely unknown. To further reveal the mechanisms, BSFL were used to treat the agricultural organic wastes, including pig manure (PM), cow manure (COM), spent mushroom substrate (SMS), and wet distiller grains (WDG). After these individual and combined waste(s) were treated by BSFL, we investigated the waste reduction rates and evaluated the responses of BSFL gut microbes to heavy metals of agricultural organic wastes. Additionally, the colloidal particles of residual wastes were characterized by combing energy dispersive X-ray (EDX) spectroscopy, Size potential, Zeta potential, and excitation-emission matrix (EEM) spectroscopy. Results indicated that the waste reduction rates were up to 74% in COM+WDG and 69% in WDG, most of heavy metals (e.g., Zn and Co) from organic wastes were not accumulated in the bodies of mature larvae after treatment. Further, results obtained from the prediction of gene function on the basis of 16 S rRNA data revealed that the presence of multi-resistance genes in the gut of BSFL can help the larvae resist Zn and/or Co stress. In addition, the drug sensitivity test implied that BSFL5_L and BSFL6_L from BSFL gut bacterial strains have multi-resistance to Co and Zn. Additionally, EDX results revealed that the colloidal particles in five waste residues after BSFL treatment are mainly consisted of Fe, Ca and Si, which can capture heavy metals (e.g., Cu, Mn). Results from EEM spectroscopy and PARAFAC showed that tryptophan-like and humic-like accumulatively account for 56%- 68% of all components. Importantly, these two components could strongly bind the metal elements and form colloidal particles with high stability, and therefore reduce the heavy metal pollution of agricultural organic wastes. Our findings offered an environment-friendly method to treat agricultural organic wastes, which would be far-reaching influence to our environment.
Assuntos
Dípteros , Metais Pesados , Bovinos , Feminino , Animais , Suínos , Larva , Esterco , Disponibilidade Biológica , Metais Pesados/toxicidadeRESUMO
Appropriate management of agricultural organic waste (AOW) presents a significant obstacle in the endeavor to attain sustainable agricultural development. The proper management of AOW is a necessity for sustainable agricultural development. This can be done skillfully by incorporating microbial agents in the composting procedure. In this study, we isolated relevant bacteria strains from tomato straw AOW, which demonstrated efficient degradation of lignocellulose without any antagonistic effects in them. These strains were then combined to create a composite microbial agent called Zyco Shield (ZS). The performance of ZS was compared with a commercially effective microorganism (EM) and a control CK. The results indicate that the ZS treatment significantly prolonged the elevated temperature phase of the tomato straw pile, showing considerable degradation of lignocellulosic material. This substantial degradation did not happen in the EM and CK treatments. Moreover, there was a temperature rise of 4-6 â in 2 days of thermophilic phase, which was not the case in the EM and CK treatments. Furthermore, the inoculation of ZS substantially enhanced the degradation of organic waste derived from tomato straw. This method increased the nutrient content of the resulting compost and elevated the enzymatic activity of lignocellulose-degrading enzymes, while reducing the urease enzyme activity within the pile. The concentrations of NH4+-N and NO3--N showed increases of (2.13% and 47.51%), (14.81% and 32.17%) respectively, which is again very different from the results of the EM and CK treatments. To some extent, the alterations observed in the microbial community and the abundance of functional microorganisms provide indirect evidence supporting the fact that the addition of ZS microbial agent facilitates the composting process of tomato straw. Moreover, we confirmed the degradation process of tomato straw through X-ray diffraction, Fourier infrared spectroscopy, and by scanning electron microscopy to analyze the role of ZS microbial inoculum composting. Consequently, reinoculation compost strains improves agricultural waste composting efficiency and enhances product quality.
Assuntos
Compostagem , Microbiota , Solanum lycopersicum , Agricultura , Bactérias/metabolismo , Solo/química , Nitrogênio/análiseRESUMO
Industrial expansion and inadequate environmental safety measures are major contributors to environmental contamination, with heavy metals (HMs) and pharmaceutical waste playing crucial roles. Their negative effects are most noticeable in aquatic species and vegetation, where they accumulate in tissues and cause harmful results. Interactions between HMs and pharmaceutical molecules result in the production of metal-drug complexes (MDCs), which have the potential to disturb diverse ecosystems and their interdependence. However, present studies frequently focus on individual pollutants and their effects on specific environmental parameters, leaving out the cumulative effects of pollutants and their processes across several environmental domains. To address this gap, this review emphasizes the environmental sources of HMs, elucidates their emission pathways during anthropogenic activities, investigates the interactions between HMs and pharmaceutical substances, and defines the mechanisms underlying the formation of MDCs across various ecosystems. Furthermore, this review underscores the simultaneous occurrence of HMs and pharmaceutical waste across diverse ecosystems, including the atmosphere, soil, and water resources, and their incorporation into biotic organisms across trophic levels. It is important to note that these complex compounds represent a higher risk than individual contaminants.
RESUMO
INTRODUCTION: Pectin-oligosaccharides (POS) serve diverse purposes as a food ingredient, antimicrobial and biostimulant in plants, and their functionality is linked to the degree of esterification. Grape and broccoli wastes emerge as environmentally friendly alternatives to obtaining pectin, serving as a sustainable source to producing POS. For example, microwaves have proven to be an effective and sustainable method to extract polysaccharides from plant matrices. OBJECTIVE: This work aims to use grape and broccoli wastes as alternative sources for obtaining pectin by microwave-assisted extraction and biotransformation into POS, which possess biological properties. MATERIAL AND METHODS: The extraction conditions were identified at a power of 400 W, 300 s for the extraction of pectin from grape pomace and broccoli waste. Biotransformation of pectins into POS, using commercial enzyme preparations (Viscozyme L and Pectinase). Characterisation was carried out by Fourier-transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. RESULTS: Physicochemical analysis indicated grape pomace and broccoli waste pectins had galacturonic acid content of 63.81 ± 1.67 and 40.83 ± 2.85 mg 100 mg-1, low degree of esterification of 34.89% and 16.22%, respectively. Biotransformation of pectins into POS resulted in a 20% hydrolysis rate. The main enzymatic activity was polygalacturonase for the degradation of the main structure of the pectin. CONCLUSION: Production of POS from agro-industrial wastes by emerging technologies, such as the combined use of microwave-assisted extraction and enzymatic processes, represents an alternative method for the generation of bioactive compounds with distinctive properties suitable for different applications of interest.
RESUMO
INTRODUCTION: Phytochemicals are used in many products, including foods, beverages, pharmaceuticals, and cosmetics. The extraction of phytochemicals is considered one of the best solutions to valorize these underestimated materials. Many methods have been developed to efficiently extract phytochemicals at high quality, high purity, and low costs without harming the environment. Recently, molecular hydrogen (H2 ) has shown its ability to improve the extraction of phytochemicals from plant materials. Due to its unique physicochemical and biological properties, H2 showed an efficient ability to extract phenolics and antioxidants at high yields with cost-effective potential. Without sophisticated equipment and high energy and solvent consumption, the hydrogen extraction method is a green and applicable alternative for the extraction of phytochemicals. OBJECTIVES: This review aims to provide the latest knowledge and results concerning the studies on using hydrogen-rich solvents to extract phytochemicals from different agri-food wastes, by-products, and other plant materials. MATERIALS AND METHODS: Recent literature relating to extracting phytochemicals by the hydrogen-rich solvent method and its potential mechanisms is summarized to provide a basic understanding of how hydrogen can improve the extraction of phytochemicals. RESULTS: This review describes, for the first time, the practical procedure of how researchers and laboratories can apply the hydrogen extraction method under safe conditions at a low-budget scale. The review provides some examples of the hydrogen extraction method and the mechanisms and rationale behind its effectiveness. CONCLUSIONS: It can be concluded that the hydrogen-rich solvent method is a green and cost-effective method for extracting phytochemicals from different plant materials.
Assuntos
Antioxidantes , Bebidas , Hidrogênio , Compostos Fitoquímicos , SolventesRESUMO
Exposure to high concentrations of odours can result in health effects associated with direct health risks and irritation from nuisance. This investigation aimed to correlate aspects of the waste composting process with the emission levels of malodourous compounds. An essential optimisation criterion is the reduction of negative environmental impacts, particularly odour emissions. This study characterises odour concentration variations across various technological variants over different weeks of the composting process. A secondary objective is evaluating the efficacy of these variants, which differ in inoculation substances and compost heap composition. Olfactometric analyses were conducted using portable field olfactometers, enabling precise dilutions by mixing contaminated and purified air. The primary aim was to examine the correlation between selected odour parameters, determined via sensory analysis, and ammonia concentration during different composting weeks. Ammonia levels were measured using an RAE electrochemical sensor. Research shows that odour concentration is a significant indicator of compost maturity. In situ, olfactometric testing can effectively monitor the aerobic stabilisation process alone or with other methods. The most effective technological solution was identified by combining olfactometric and ammonia measurements and monitoring composting parameters, ensuring minimal odour emissions and the safety of employees and nearby residents.
Assuntos
Amônia , Compostagem , Odorantes , Olfatometria , Odorantes/análise , Amônia/análise , Compostagem/métodos , Olfatometria/métodos , Humanos , Monitoramento Ambiental/métodos , Solo/químicaRESUMO
This work was focused on the selective recovery of gold and silver from electronic wastes using a sequential process of pyrometallurgy (Qalkari) and room-temperature hydrometallurgy. In the first step, electronic wastes underwent Qalkari recycling, yielding tablets containing precious elements (Qalkari furnace product) and melting slag (Qalkari furnace waste). In the subsequent hydrometallurgy phase, the nitric acid concentration and the input solid amount were optimized for the effective room-temperature recovery of gold. Due to the successful separation of precision elements and disturbing substances in Qalkari, the gold recovery efficiency of 99.99% was obtained at the acid concentration of 50% (v/v) and the solid input of 15% (w/v). Afterwards, HCl, NH4Cl, and NaCl were used for silver recovery from the Qalkari-processed gold-recovered leaching solution, leading to the efficiency of 99.99%. But NH4Cl was recognized as the most effective precipitant as it promises the most enhanced potential for the possible subsequent recovery of palladium. In conclusion, this study draws the effectiveness of Qalkari in recycling electronic wastes, with a significant impact on the efficiency of succeeding room-temperature hydrometallurgical processes for gold and silver recovery within a reasonable leaching time.