Impact of using XP-endo finisher and nanobubble water during EDTA dentin conditioning on TGF-ß1 release in regenerative endodontic procedures.

INTRODUCTION: Transforming Growth Factor-Beta 1 (TGF-ß1) plays a crucial role in the success of Regenerative Endodontic Procedures (REPs) as they directly impact the proliferation and differentiation of stem cells. TGF-ß1 is released by conditioning of the dentin matrix using 17% EDTA. EDTA was found to have deleterious effects on dentin especially in immature teeth with fragile dentin walls. Decreasing the irrigation time was reported to decrease these effects. Accordingly, enhancement and activation of the EDTA solution to maintain its efficiency in TGF-ß1 release from dentin and thus compensating the reduction in irrigation time was employed. EDTA solution was enhanced by adding Nanobubble (NB) water which contains oxygen filled cavities less than 200 nm in diameter. Additionally, EDTA was activated with XP-endo Finisher rotary file. The aim of this study was to assess the impact of NB enhancement and/or XP-endo Finisher activation of the EDTA solution on the TGF-ß1 release from dentin. METHODS: Fifty standardized root segments with open apex were allocated to two main groups according to whether EDTA was enhanced with NB water or not, and within each group whether XP-endo Finisher activation was used or not in addition to a Negative Control group. The concentration of the released TGF-ß1 in the root canal was measured using enzyme-linked immunosorbent assay (ELISA). The statistical analysis was done using the Shapiro- Wilk, Kolmogorov Smirnov, ANOVA and Post-hoc Tukey tests. RESULTS: All groups released a considerable amount of TGF-ß1 with the highest values in the EDTA/NB/XP group, followed by EDTA/NB, EDTA/DW/XP, EDTA/DW and Negative Control groups respectively. CONCLUSIONS: The results of this study suggest that NBs can promote the success of REPs since it revealed a significant increase in the TGF-ß1 release following its use in the enhancement of the EDTA solution. A comparable effect was obtained by XP-endo finisher activation of the EDTA solution. The combined use of NBs and XP-endo Finisher can be a promising addition in REPs. Accordingly, Enhancement and activation of the EDTA solution may compensate decreasing the EDTA irrigation time attempted to avoid the deleterious effect of EDTA on dentin.

Comparative effects of 17% ethylenediaminetetraacetic acid and 9% etidronic acid applied with different irrigant activation techniques on the release of growth factors from dentin: in vitro study.

BACKGROUND: Growth factors embedded in the extracellular matrix of the dentin play an important role in the migration, proliferation, and differentiation of dental pulp stem cells in regenerative endodontics. In regenerative endodontic treatments, the type of irrigation solution used is crucial for the release of growth factors (GFs) from the dentin matrix. This study evaluated the effectiveness of different irrigant activation techniques (IAT) using two different chelating agents, 17% ethylenediaminetetraacetic acid (EDTA) and 9% etidronic acid (HEDP), in terms of their GF release. METHODS: Seventy-two mandibular premolar teeth were prepared to simulate an open apex. The root fragments were irrigated with 20 ml of 1.5% sodium hypochlorite and 20 ml of saline solution. Eight root fragments were randomly separated for the control group, and the remaining 64 fragments were randomly separated into eight groups based on two different chelating agents (17% EDTA and 9% HEDP) and four different IAT ((conventional needle irrigation (CNI), passive ultrasonic irrigation (PUI), sonic activation with EDDY, and XP-endo Finisher (XPF)). TGF-ß1, VEGF-A, BMP-7 and IGF-1 release levels were determined using an ELISA, and statistical analysis was performed using the Kolmogorov-Smirnov test, ANOVA, and the Tukey test (p < .05). RESULTS: Compared to the control group, the experimental groups showed significantly higher GF release when using EDTA or HEDP. Among the activation groups, the EDDY group triggered the highest GF release, and the CNI group triggered the lowest. CONCLUSIONS: IAT with EDTA and HEDP can increase GF release, with EDDY being the most effective IAT method. Using chelating agents with IAT may be beneficial in regenerative endodontic treatments.

Enhancing debris removal in curved canals: a comparative evaluation of XP-endo Finisher and Passive Ultrasonic Irrigation.

OBJECTIVES: The study aimed to compare the efficacy of XP-endo Finisher and Passive Ultrasonic Irrigation (PUI) in removing hard tissue debris from curved canals. MATERIALS AND METHODS: Thirty-four mandibular molars with Vertucci's type II mesial canals were scanned in microcomputed tomography before and after preparation with HyFlex EDM, and accumulated hard tissue debris was quantified. Subsequently, the teeth were randomly divided into two groups according to the supplementary procedure: PUI with the Ultra-X insert or XP-endo Finisher. After the intervention, the specimens underwent another scanning. Two separate analyses were conducted, one for the total canal and another for the isthmus area. Unpaired and paired T-tests were used for inter- and intergroup comparisons, with a significance level set at 5%. RESULTS: Both supplementary methods reduced the amount of debris compared to the initial volume. Remarkably, the XP-endo Finisher achieved a significantly higher percentage of debris removal (71% for the total canal and 74% for the isthmus areas) compared to PUI (41% for the total canal and 52% for the isthmus area) (P < 0.05). CONCLUSIONS: Both supplementary approaches reduced the amount of hard tissue debris from canal preparation, still XP-endo Finisher showed a higher reduction compared to PUI (p < 0.05). CLINICAL RELEVANCE: None of the supplementary methods rendered canals completely free of hard tissue debris. However, the supplementary approach with XP-endo Finisher resulted in lower levels of hard tissue debris than PUI in curved canals with isthmuses.

Comparative Evaluation of Different Irrigant Agitating Devices for Debris Removal from the Mesial Roots of Mandibular Molars: An In Vitro Study.

AIM: To evaluate the efficiency of debris removal from the mesial root canals and isthmus of mesial roots of mandibular molars after final irrigant agitation with XP-endo Shaper, EndoVac (EV), plastic finishing file, and conventional needle irrigation. METHODS AND MATERIALS: Forty extracted human mandibular first molar teeth with the isthmus between the mesial roots were selected, access cavities were prepared and distal roots were decoronated. All the mesial root specimens were mounted in acrylic, sectioned at the coronal, middle, and apical thirds, along with the resin block, and examined for debris in the canals and isthmus before the start of the procedure using a stereomicroscope and were mounted back in a custom-made jig. After determination of the working length, they were allocated to the following four different irrigant activation groups (n = 10): Group I-XP-endo Finisher; group II-EndoVac; group III-plastic finishing file; and group IV-standard needle irrigation. After biomechanical preparation (BMP) till F3, final agitation was done for debris removal with the respective agitating devices, and all the samples were examined under a stereomicroscope for the amount of debris in the canal after final agitation. RESULTS: Of all the irrigation devices used, the XP-endo Finisher and EV showed more debris removal when compared to other groups (p < 0.05). The plastic finishing file in continuous rotation was more efficient in cleaning debris compared with conventional needle irrigation (p < 0.05). CONCLUSION: The XP-endo Finisher and EV showed a significant difference in cleaning efficacy than the plastic finishing files. So, these can be used as adjunctive for agitating the final irrigant. CLINICAL SIGNIFICANCE: The irrigant agitation devices promote the penetration of irrigants into the intricate root canal anatomy and increase their antibacterial and tissue-dissolving effectiveness thereby improving the success rate and treatment outcome.

A modified dentine infection model with fluorescent lipopolysaccharide and lipopolysaccharides sampling technique to compare XP-Endo finisher and passive ultrasonic irrigation.

AIM: The lipopolysaccharides-dentine-infection (LPS-dentine-infection) models and sampling techniques frequently used to evaluate LPS disinfection have limitations. In this study, a LPS-dentine-infection model was devised using fluorescent conjugate LPS. Secondly, a sampling technique using cryogenic grinding for intraradicular LPS analysis was evaluated. Thirdly, the effectiveness of the XP-endo Finisher (XP-EF) was compared with passive ultrasonic irrigation (PUI) in removing LPS from root canal system. METHODOLOGY: Sixty-nine mandibular premolars were submitted to dentine pretreatment and inoculated with fluorescent LPS conjugate (Alexa Fluor® 594). Twenty-three teeth were analysed under confocal laser scanning microscopy (CLSM) to validate this modified LPS-dentine-infection model. Forty-six teeth were randomly divided into two experimental groups: XP-EF (n = 23) and PUI (n = 23). All teeth were instrumented with XP-endo shaper (XPS; FKG Dentaire) and 2.5% NaOCl. The root canals were sampled with paper points before (s1) and after (s2) instrumentation and after supplemental treatment (s3) with XP-EF and PUI. After s3, all roots were cryogenically ground for intraradicular LPS analysis (s4). Limulus amebocyte lysate assay was used for LPS quantification. The Friedman test was used for differences in LPS among four time-points (s1, s2, s3, and s4). Dunn's test was used for pairwise testing of time-points. The significance level was set at 5% (p < .05). RESULTS: Fluorescent LPS conjugate was detected in 100% of the samples under CLSM with a penetration depth of approximately 400 µm into dentine. Chemo-mechanical preparation using XPS files significantly reduced LPS levels (p < .05). Both the XPS and PUI improved the LPS disinfection (p < .05), with no difference between them (p > .05). LPS was recovered from all samples after cryogenic grinding. The residual amount of LPS detected using the cryogenically sampling technique at s4 was approximately three times greater than with the paper-point sampling technique at s3. CONCLUSION: This study established a modified LPS-dentine-infection model using fluorescent conjugate LPS, and validated a LPS sampling technique for using cryopulverization intraradicular LPS analysis. Moreover, both the XP-EF and PUI further improved LPS disinfection from the root canals, and the innovative XP-EF was as effective as PUI.

Impact of agitation/activation strategies on the antibiofilm potential of sodium hypochlorite/etidronate mixture in vitro.

BACKGROUND: To investigate the effect of a rotary agitation method or ultrasonically activated irrigation on the antibiofilm effect of a mixture of sodium hypochlorite (NaOCl) and etidronate (1-hydroxyethylidene-1,1-bisphosphonate, HEBP) using a dual-species biofilm model in root canal system. METHODS: Mature dual-species biofilms of Enterococcus faecalis and Streptococcus gordonii were formed in root canals of mandibular premolars. Teeth were randomly allotted (n = 12) to group 1, XP-endo Finisher (XPF); group 2, ultrasonically activated irrigation (UAI); group 3, syringe-and-needle irrigation (SNI). In all groups, canals were instrumented with a rotary instrument (XP-endo Shaper) prior to irrigant agitation/activation. A mixture containing 2.5% NaOCl and 9% HEBP was used throughout the experiment. Bacterial counts from the canal were determined using qPCR before preparation (S1), after preparation (S2), and after final irrigation agitation/activation (S3). Bacterial viability within the dentinal tubules in the coronal, middle and apical root-thirds was quantified using confocal microscopy after Live/Dead staining. The bacterial counts and viability were compared between groups using one-way ANOVA and post-hoc Tukey's tests. Paired t-test was used to compare the bacterial counts within groups. RESULTS: Instrumentation alone could significantly reduce the microbial counts in all the groups (P < 0.0001). Subsequent agitation/activation resulted in significant microbial reduction only in XPF and UAI (P < 0.05), both of which reduced significantly more microbial counts than SNI (P < 0.05). Live/Dead staining revealed that XPF and UAI showed significantly greater percentage of dead bacteria within the dentinal tubules than SNI in the coronal third (P < 0.05); UAI resulted in the significantly highest percentage of dead bacteria in the middle third (P < 0.05); while there was no significant difference between the groups in the apical third (P > 0.05). CONCLUSIONS: When using the sodium hypochlorite/etidronate mixture for irrigation, final irrigant agitation/activation with XP-endo Finisher or ultrasonic can improve disinfection of the main root canal space and the dentinal tubules in the coronal third, while ultrasonically activated irrigation appears to exhibit better disinfection within dentinal tubules in the middle third.

A laboratory study of root canal and isthmus disinfection in extracted teeth using various activation methods with a mixture of sodium hypochlorite and etidronic acid.

AIM: To evaluate in a laboratory setting the antibiofilm activity of several irrigating protocols including conventional irrigation, ultrasonic activation and XP-endo Finisher, with a mixture of sodium hypochlorite and etidronic acid in infected isthmuses and root canals of extracted human mandibular molar teeth. METHODOLOGY: Fifty-six mesial roots of mandibular molars, half of them with a continuous isthmus from the cervical to the apical third between the two root canals (type 1), and the other half with a continuous isthmus from the cervical to the middle third and one canal in the apical third (type 2), were included. The root canals were contaminated for 7 days with an Enterococcus faecalis suspension. There were three experimental groups plus a control group (n = 7 per type of root canal anatomy). All the root canals, except for the control group that was not treated, were chemomechanically prepared and then assigned to one of the experimental groups according to the final adjunctive procedure: conventional irrigation, ultrasonic activation or XP-endo Finisher activation. The irrigating solution used was a combination of 2.5% sodium hypochlorite and 9% etidronic acid, and the final protocols were applied for three cycles of 30 s with a 3 mL volume. The antibiofilm activity was evaluated at each location (root canal and isthmus) and third (cervical, middle and apical) using confocal laser scanning microscopy and the live/dead technique. Statistical analysis was performed using SPSS (descriptive statistics) and SUDAAN (P-value calculations). RESULTS: Root canals had significantly lower biovolume values than the isthmuses (P < 0.05). The biovolume in the root canals was significantly reduced in all the experimental groups in all the thirds except for conventional irrigation in the apical third (P > 0.05). In the cervical and middle thirds, ultrasonic activation was associated with the lowest biovolumes (P < 0.05), followed by XP-endo Finisher. In the isthmus, disinfection was similar in all the thirds for all the protocols. Conventional irrigation was associated with intermediate values with no significant differences from the control group or from the activated protocols (P > 0.05), although the latter were significantly different from the control group (P < 0.05). No differences were found between ultrasonic activation and XP-endo Finisher in the middle and apical thirds (P > 0.05) in the isthmuses. CONCLUSIONS: In this laboratory study on extracted teeth, the isthmus was more difficult to disinfect than root canals. In the root canals, ultrasonic activation and XP-endo Finisher had a greater effectiveness than conventional irrigation. In the isthmuses, no differences were observed between the two activation techniques and conventional irrigation.

Influence of different irrigation regimens on the dentinal tubule penetration of a bioceramic-based root canal sealer: a confocal analysis study.

This study aims to assess the efficacy of various irrigation protocols on the dentinal tubule penetration of a bioceramic-based endodontic sealer. Sixty-four single-rooted extracted human mandibular incisors were used. After instrumentation, teeth were randomly divided into the following four groups (n = 16 each) according to the final irrigation technique: group 1, conventional endodontic needle (CEN); group 2, EndoActivator (EA); group 3, Er,Cr: YSGG laser; group 4, XP-endo Finisher (XPF). The root canals were finally irrigated with 17% EDTA and 5.25% NaOCl for 1 min (min) respectively. The teeth were then obturated with Endosequence BC Points and rhodamine B dye-labeled BC Sealer. After 2 weeks, 1-mm-thick transverse sections were cut 2 and 5 mm from the apex, and examined by confocal laser scanning microscopy at 5 × magnification. The total percentage of sealer penetration (TPSP), sealer penetration area (SPA), and maximum sealer penetration depth (MSPD) was measured. Data were analyzed by Kruskal-Wallis, Dunn's multiple comparison, and Wilcoxon tests, with significance set at P < 0.05. At 2 mm level, no significant differences were detected among the groups (P > 0.05). At the 5 mm level, the XPF group showed significantly higher values for both TPSP and SPA in comparison with the Er,Cr: YSGG laser and CEN groups (P < 0.05), but no significant difference was observed with the EA group. The choice of different final irrigation techniques can affect dentinal tubule penetration.

Effectiveness of XP-Endo Finisher and passive ultrasonic irrigation on intracanal medicament removal from root canals: a systematic review and meta-analysis.

BACKGROUND: XP-Endo Finisher (XPF) and passive ultrasonic irrigation (PUI) are commonly used in intracanal medicament removal. The effectiveness of these two techniques needs to be compared, and evidence-based research should be conducted. METHODS: A comprehensive literature search was conducted in PubMed, Web of Science, Embase, Cochrane Library, and Google Scholar up to December 20th, 2020. The outcomes of the included trials were pooled into the Cochrane Collaboration's Review Manager 5.3 software. Cochrane's risk-of-bias tool 2.0 was applied to assess the risk of bias. RESULTS: Nine articles were included in this systematic review and processed for data extraction, and eight studies were identified for meta-analysis. In general, the use of PUI showed better medicament removal effectiveness than XPF (odds ratio [OR]: 3.09; 95% confidence interval [CI], 1.96-4.86; P < 0.001). PUI was also significantly more efficient than XPF in the apical third (OR: 3.42; 95% CI, 1.32-8.84; P = 0.01). For trials using sodium hypochlorite (NaOCl) alone, PUI was also significantly more effective than XPF on intracanal medicaments removal (OR: 5.23; 95% CI, 2.79-9.82; P < 0.001). However, there was no significant difference between PUI and XPF when NaOCl and ethylenediaminetetraacetic acid (EDTA) were used in combination (OR: 1.51; 95% CI, 0.74-3.09; P = 0.26). In addition, for studies whose intracanal medicament periods were two weeks, the effectiveness of PUI was statistically better than the XPF (OR: 7.73; 95% CI, 3.71-16.07; P < 0.001). Nevertheless, for trials whose intracanal medicament time was one week or over two weeks, no differences between the XPF and PUI were found (OR: 1.54; 95% CI, 0.74-3.22; P = 0.25) (OR: 1.42; 95% CI, 0.44-4.61; P = 0.56). CONCLUSIONS: The meta-analysis is the first study to quantitatively compare the effectiveness of XPF and PUI techniques on intracanal medicaments removal. With rigorous eligibility criteria, the study only included high-quality randomised controlled trials. The study indicated that PUI might be superior over XPF techniques for removing intracanal medicaments from artificial standardized grooves and cavities in the root canal system. The anatomical areas, irrigation protocol, and intracanal medicaments time may influence the cleaning efficacy.

Efficiency of Supplementary Contemporary Single-file Systems in Removing Filling Remnants from Oval-shaped Canals: An In Vitro Study.

AIM: This study investigated the performance of supplementary three single-file systems for eliminating root filling residue from oval-shaped canals utilizing cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Thirty single-rooted human mandibular premolars with oval-shaped canals were chosen. After decoronation and working length determination, ProTaper Universal (PTUR) rotary files were used to prepare canals up to F3. Irrigation was fulfilled by 2.5% sodium hypochlorite (NaOCl), 17% ethylenediaminetetraacetic acid (EDTA), and lastly distilled water. By utilizing the lateral compaction technique, canals were filled by gutta-percha and Endosequence BC Sealer. The PTUR retreatment system (D1, D2, and D3) eliminated the primary filling material sequentially. Subsequently, specimens were categorized into three groups at random: group I: WaveOne Gold (WOG) primary file, group II: TruNatomy (TRN) medium file, and group III: XP-endo Finisher R (XPF-R). The volume of residual left from filling material was quantified utilizing CBCT imaging before and after the supplementary retreatment. Statistical analyses were done by one-way analysis of variance (ANOVA) and Tukey's test at a 5% significance level. RESULTS: The volume of removed root filling after using XPF-R was significantly higher than using WOG in all sections and TRN in the coronal third, while nonsignificantly higher than using TRN in the apical and middle. CONCLUSION: XPF-R as a supplementary technique revealed the highest percentage reduction of root filling material (73.13%) in comparison with the other systems (37.39% WOG and 44.16% TRN) in oval-shaped canals. CLINICAL SIGNIFICANCE: Neither one of the methods and tools used to remove filling material from oval-shaped root canals is perfectly efficient. The performance of supplementary techniques using contemporary single-file systems improves the cleaning and reshaping of root canal space that permits a proper disinfection to optimize the outcome of retreatment option.

Efficacy of Different Endodontic Irrigant Activation Techniques on Debris Removal from the Mesial Root Canal System of Mandibular Molars.

AIM AND OBJECTIVE: This study was conducted to compare debris removal from the mesial canal system with four different irrigation techniques: sonic activation with EDDY, passive ultrasonic irrigation (PUI), mechanical activation with the XP-endo Finisher (XPF), and manual dynamic irrigation (MDI) with gutta-percha. MATERIALS AND METHODS: Fifty-six extracted mandibular molars with isthmus in the apical 5 mm in mesial roots were sectioned horizontally at 3 mm and 5 mm from the apex. The sections were reassembled, and the mesial canals were prepared chemomecahanically. Specimens were allocated randomly into four groups according to the final irrigation technique. Standardized images of the coronal aspect of cross sections were obtained using a digital stereomicroscope before and after final irrigation protocols to calculate the percentage of debris elimination from the canal system after final irrigation. RESULTS: The use of EDDY, PUI, and XPF exhibited significant reductions in debris compared with MDI at 5 mm (p <0.00) and at 3 mm (p <0.00). Furthermore, no significant difference was noted among EDDY, PUI, and XPF. For intragroup analysis, no statistically significant difference in the percentage of debris elimination was noted between 3 mm and 5 mm in all four groups. CONCLUSION: All groups showed a reduction in debris after the final irrigation protocol. However, the use of EDDY, PUI, and XPF after cleaning and shaping yielded a significant reduction in debris compared with MDI. CLINICAL SIGNIFICANCE: The use of PUI, XPF, and EDDY as an adjunctive irrigation step presented similar results in improving canal cleanliness, which is hypothesized to affect the treatment outcome.

Micro-CT evaluation of the removal of root fillings using the ProTaper Universal Retreatment system supplemented by the XP-Endo Finisher file.

AIM: To compare the removal of root fillings in extracted teeth using the ProTaper Universal Retreatment system (PTUR) followed by a supplementary preparation with the XP-Endo Finisher file. METHODOLOGY: The mesiobuccal root canals of 30 extracted mandibular first molars were instrumented with ProTaper Universal NiTi files up to F2 and filled with one of the following sealers using a single-cone technique (n = 10): AH Plus, NeoMTA Plus and EndoSequence BC. The root fillings were removed using the PTUR system with additional apical preparation using ProTaper F2 and F3 files. Then, an additional preparation with an XP-Endo Finisher file was performed. The samples were scanned using micro-CT before and after retreatment and again after the use of the XP-Endo Finisher to assess the volume of remaining filling material. Data were analysed by Kruskal-Wallis and Friedman's two-way analysis of variance tests with Bonferroni correction. RESULTS: No significant difference in the initial filling volume was observed amongst the groups (P > 0.05). The amount of filling materials in each group decreased significantly after retreatment with rotary files (P < 0.05). After initial retreatment, the volume of the remaining filling amongst the groups was similar (P > 0.05). Additional preparation with the XP-Endo Finisher improved the removal of filling materials regardless of the sealer type (P < 0.05). CONCLUSIONS: In the mesiobuccal root canals of extracted mandibular first molars, additional preparation using an XP-Endo Finisher file, after using the PTUR system and F3 ProTaper instruments, enhanced the removal of filling materials from root canals.

XP-endo Finisher R instrument optimizes the removal of root filling remnants in oval-shaped canals.

AIM: To evaluate the performance of XP-endo Finisher R instruments when removing root filling remnants from oval-shaped canals using microcomputed tomographic (micro-CT) imaging as the analytical tool. Passive ultrasonic irrigation (PUI) was used as a reference technique for comparison. METHODOLOGY: Twenty mandibular incisors with oval-shaped canals were matched based on similar anatomic features of the canal (volume, aspect ratio and 3D configuration) after scanning procedures. The canals were prepared with Reciproc R25 instruments, filled with gutta-percha and AH Plus sealer using the single-cone technique and retreated up to a Reciproc R40 instrument. After retreatment procedures, the specimens were rescanned, and the homogeneity between the specimens, the oval-shaped anatomy and the remaining filling material were confirmed. The pair-matched samples were assigned to two experimental groups (n = 10), according to the supplementary approach used: XP-endo Finisher R or PUI. Each sample was scanned after each endodontic procedure. The volume of remaining root filling material was quantified before and after the use of each supplementary approach. This analysis was performed considering the total canal (Student t-test) and also by thirds (anova procedure followed by a Bonferroni correction). Data were analysed statistically with a significance level of 5%. RESULTS: The volume of root filling material at baseline was similar between the groups (t-test, P = 0.787). XP-endo Finisher R removed significantly more root filling material compared to PUI (t-test, P = 0.015), as it removed a mean of ≅32% material compared to 12% for the PUI. There was no difference in the amount of root filling material removed in the root canal thirds after using both supplementary approaches (one-way anova, P = 0.07 for XP-endo Finisher R and P = 0.886 for PUI). CONCLUSIONS: Both supplementary approaches significantly reduced the volume of remaining root filling material from oval-shaped canals. The XP-endo Finisher R instrument removed significantly more root filling material than PUI. None of the supplementary approaches was able to render oval-shaped canals completely free from remaining root filling material.

Micro-CT comparison of XP-endo Finisher and passive ultrasonic irrigation as final irrigation protocols on the removal of accumulated hard-tissue debris from oval shaped-canals.

OBJECTIVE: To compare the effectiveness of the XP-endo Finisher instrument and passive ultrasonic irrigation (PUI) as final irrigation protocols on the removal of accumulated hard-tissue debris (AHTD) from oval-shaped canals using micro-computed tomographic (micro-CT) analysis. METHODS: Twenty mandibular incisors were anatomically pair-matched based on similar morphological dimensions (length, volume, aspect ratio, and configuration) through micro-CT analysis, prepared with Reciproc R25 instrument, scanned again, and assigned to one of the two experimental groups (n = 10), according to the final irrigation protocol: XP-endo Finisher and PUI. After the final irrigation protocols, the specimens were rescanned and the registered datasets were examined to quantify the amount of AHTD. Data were statistically analyzed using Student's t test with a significance level of 5%. RESULTS: The final irrigation protocols were highly similar in terms of volumetric percentage reduction of AHTD (P = 1.000). CONCLUSIONS: XP-endo Finisher and PUI showed the same effectiveness on the removal of AHTD. None of the tested final irrigation protocols completely removed the AHTD from oval-shaped root canals. CLINICAL RELEVANCE: AHTD may be considered clinically relevant because it could harbor bacterial contents away from the disinfection procedures. Both final irrigation protocols were effective on the removal of AHTD.

Effectiveness of XP-endo Finisher and XP-endo Finisher R in removing root filling remnants: a micro-CT study.

AIM: To evaluate the efficacy of filling material removal from oval-shaped canals after the use of supplementary files (XP-endo Finisher and XP-endo Finisher R) through microcomputed tomographic (micro-CT) analysis. METHODOLOGY: The root canals of twenty maxillary single-rooted teeth were prepared with Reciproc R25 files and filled with gutta-percha and AH Plus sealer using the continuous wave of condensation technique. The root canals were then retreated using Reciproc R25 and R40 instruments. After this, the specimens were assigned to two groups according to the supplementary cleaning approach, using XP-endo Finisher and XP-endo Finisher R. The surface area and volume of removed filling material was assessed using micro-CT imaging before and after the use of the XP-endo instruments. Data were analysed statistically with a significance level of 5%. RESULTS: Removal of filling material at 66.8% and 59.4% in volume and 67.3% and 61.4% in surface area was seen for the XP-endo Finisher and the XP-endo Finisher R files, respectively. The amount of filling material removed by both supplementary files was highly significant (P = 0.000). No significant difference in the percentage of removed filling material was detected for the XP-endo instruments (P = 0.636 for volume and P = 0.667 for surface area). CONCLUSIONS: Both XP-endo files were equally effective in the removal of remaining filling material from straight oval-shaped canals. None of the instruments were able to remove all the residual filling material.

Apical extrusion of debris during the preparation of oval root canals: a comparative study between a full-sequence SAF system and a rotary file system supplemented by XP-endo finisher file.

OBJECTIVES: The purpose of this study was to assess the amount of apically extruded debris during the preparation of oval canals with either a rotary file system supplemented by the XP-endo Finisher file or a full-sequence self-adjusting file (SAF) system. MATERIALS AND METHODS: Sixty mandibular incisors were randomly assigned to two groups: group A: stage 1-glide path preparation with Pre-SAF instruments. Stage 2-cleaning and shaping with SAF. Group B: stage 1-glide path preparation with ProGlider file. Stage 2-cleaning and shaping with ProTaper Next system. Stage 3-Final cleaning with XP-endo Finisher file. The debris extruded during each of the stages was collected, and the debris weights were compared between the groups and between the stages within the groups using t tests with a significance level set at P < 0.05. RESULTS: The complete procedure for group B resulted in significantly more extruded debris compared to group A. There was no significant difference between the stages in group A, while there was a significant difference between stage 2 and stages 1 and 3 in group B, but no significant difference between stages 1 and 3. CONCLUSIONS: Both instrumentation protocols resulted in extruded debris. Rotary file followed by XP-endo Finisher file extruded significantly more debris than a full-sequence SAF system. Each stage, in either procedure, had its own contribution to the extrusion of debris. CLINICAL RELEVANCE: Final preparation with XP-endo Finisher file contributes to the total amount of extruded debris, but the clinical relevance of the relative difference in the amount of apically extruded debris remains unclear.

Efficacy of XP-endo finisher files in the removal of calcium hydroxide paste from artificial standardized grooves in the apical third of oval root canals.

AIM: To compare the efficacy of the XP-endo finisher file (XP) (FKG Dentaire, La Chaux de Fonds, Switzerland) to that of passive ultrasonic irrigation (PUI) and conventional syringe and needle irrigation (SNI) in the removal of calcium hydroxide paste from an artificial standardized groove in the apical third of root canals. METHODOLOGY: The root canals of 68 mandibular incisors with single oval canals were prepared using Mtwo instruments (VDW GmbH, Munich, Germany) up to size 40, .04 taper. Each tooth was split longitudinally, and in one half of the root, a standardized groove was prepared in the apical part of the specimen. The grooves were filled with Ca(OH)2 , and the root halves were reassembled. The roots were randomly divided into two control groups (n = 4) and three experimental groups (n = 20) according to the Ca(OH)2 methods used: XP, PUI and SNI. The amount of remaining medicament was evaluated under X25 magnification using a 4-grade scoring system. Kappa values were calculated for intra- and interobserver agreement evaluation. The differences in the Ca(OH)2 scores amongst the different groups were analysed using the Kruskal-Wallis test. RESULTS: None of the tested methods could completely clean the Ca(OH)2 from the artificial standardized groove in the apical third of the root canals. XP and PUI removed significantly more Ca(OH)2 than SNI (P < 0.001), with no significant differences between them (P = 0.238). CONCLUSIONS: XP and PUI were more effective in removing Ca(OH)2 from artificial standardized grooves in the apical third of root canals than SNI.

Effectiveness of XP-endo Finisher, EndoActivator, and File agitation on debris and smear layer removal in curved root canals: a comparative study.

The purpose of this study was to assess the efficacy of the XP-endo Finisher (FKG Dentaire SA, La Chaux-de-Fonds, Switzerland) file on debris and smear layer removal in curved root canals in comparison to different irrigation regimens. Seventy-five freshly extracted human mandibular molar teeth with mesial root curved more than 20° were used in this study. The mesial root canals were mechanically prepared using the BT-Race rotary system (FKG Dentaire) and divided into five groups (n = 15) according to the following irrigation techniques: positive control, non-agitated, File agitation, XP-endo Finisher, and EndoActivator (Dentsply Tulsa Dental Specialities, Tulsa, OK, USA). Root canals were split longitudinally and evaluated by scanning electron microscopy. Five-grade scoring system was used to assess the presence of debris and smear layer at the coronal, middle, and apical regions. The XP-endo Finisher and EndoActivator groups revealed significantly lower debris and smear layer scores than the other groups at the coronal, middle, and apical regions (P < 0.05). There was no significant difference between XP-endo Finisher and EndoActivator groups (P > 0.05). The apical region had higher debris and smear layer scores compared with the coronal regions in all groups (P < 0.05), except for the positive control group; there was no significant difference between the three regions of the root canal (P > 0.05). Irrigation of curved root canals using XP-endo Finisher and EndoActivator methods appears to be more effective on debris and smear layer removal than the other tested groups.

Comparative evaluation of the effect of ultrasonic and rotary agitation of herbal irrigating solutions on smear layer: A SEM study.

Context: Instrumentation and irrigation balance helps in effective removal of endodontic microbes housing inside the smear layer. Aim: This study aimed to (1) evaluate whether activation of the irrigating solutions with two different systems during the final irrigation step can lead to smear layer formation in the middle and apical third of the root canal and (2) evaluate and compare the smear layer removal ability of the aqueous extracts of Emblica officinalis and Morinda citrifolia. Materials and Methods: A total of 72 single-rooted teeth were prepared up to F4 ProTaper. The specimens were assigned into eight groups of nine teeth each, according to the final irrigant and activation techniques. Further, the teeth were evaluated under SEM for endodontic smear layer at the middle and apical third. Statistical Analysis: Inferential statistics included Pearson's Chi-square. Level of significance was set at 0.05 at 95% confidence level. Results: Ultrasonic activation system showed significant (P = 0.000) amount of smear layer compared to XP-Endo Finisher file. A significant difference (P = 0.00) in the smear layer removal was observed when 6% M. citrifolia was activated with XP-Endo Finisher file both in the middle and apical third. Conclusion: Within the limitations of this in vitro study, it can be concluded that smear layer formation was noted with ultrasonic and XP-Endo Finisher file when saline was used as an irrigant. 6% M. citrifolia when activated with XP-Endo Finisher file showed best results among all other experimental groups.

Extrusion of Sodium Hypochlorite in Oval-Shaped Canals: A Comparative Study of the Potential of Four Final Agitation Approaches Employing Agarose-Embedded Mandibular First Premolars.

Background: The aim of this investigation was to assess the apical extrusion potential of sodium hypochlorite (NaOCl) in agarose-embedded mandibular first premolars employing four final agitation procedures. Methods: Based on CBCT confirmation of single oval-shaped canals, one hundred extracted mandibular first premolars were chosen. Using 5.25% NaOCl, the teeth were prepared using the XP Endo Shaper and divided into experimental and control groups. The following were the experimental groups: Group 1 comprised the XP-Endo Finisher, Group 2 the Ultrasonic Activation, Group 3 the Gentle File Finisher Brush, and Group 4 the 27-gauge side-vented needle. To test extrusion, the teeth were placed in a 0.2% agarose gel that contained the pH-sensitive dye m-cresol purple, allowing pixel quantification via ImageJ software (version 1.54i). Results: The XP Endo Finisher featured the most pixels, depicting higher apical extrusion (p < 0.01), followed by the side-vented needle, Gentle File Finisher Brush, and PUI, while the Control Group endured no extrusion. Conclusions: The effective irrigation method for root canal therapy is critical, especially in situations of open apices, resorption, or perforation. According to in vitro experiments, the XP-Endo Finisher has the maximum sodium hypochlorite extrusion, which is determined by parameters such as apical preparation size and irrigation system.