Tooth acellular extrinsic fibre cementum incremental lines in humans are formed by parallel branched Sharpey's fibres and not by its mineral phase.

In humans, the growth pattern of the acellular extrinsic fibre cementum (AEFC) has been useful to estimate the age-at-death. However, the structural organization behind such a pattern remains poorly understood. In this study tooth cementum from seven individuals from a Mexican modern skeletal series were analyzed with the aim of unveiling the AEFC collagenous and mineral structure using multimodal imaging approaches. The organization of collagen fibres was first determined using: light microscopy, transmission electron microscopy (TEM), electron tomography, and plasma FIB scanning electron microscopy (PFIB-SEM) tomography. The mineral properties were then investigated using: synchrotron small-angle X-ray scattering (SAXS) for T-parameter (correlation length between mineral particles); synchrotron X-ray diffraction (XRD) for L-parameter (mineral crystalline domain size estimation), alignment parameter (crystals preferred orientation) and lattice parameters a and c; as well as synchrotron X-ray fluorescence for spatial distribution of calcium, phosphorus and zinc. Results show that Sharpey's fibres branched out fibres that cover and uncover other collagen bundles forming aligned arched structures that are joined by these same fibres but in a parallel fashion. The parallel fibres are not set as a continuum on the same plane and when they are superimposed project the AEFC incremental lines due to the collagen birefringence. The orientation of the apatite crystallites is subject to the arrangement of the collagen fibres, and the obtained parameter values along with the elemental distribution maps, revealed this mineral tissue as relatively homogeneous. Therefore, no intrinsic characteristics of the mineral phase could be associated with the alternating AEFC incremental pattern.

Prospecting for rare earth element (hyper)accumulators in the Paris Herbarium using X-ray fluorescence spectroscopy reveals new distributional and taxon discoveries.

BACKGROUND: Rare earth elements (REEs) are increasingly crucial for modern technologies. Plants could be used as a biogeochemical pathfinder and a tool to extract REEs from deposits. However, a paucity of information on suitable plants for these tasks exists. METHODS: We aimed to discover new REE-(hyper)accumulating plant species by performing an X-ray fluorescence (XRF) survey at the Herbarium of the Muséum national d'Histoire naturelle (MNHN, Paris, France). We selected specific families based on the likelihood of containing REE-hyperaccumulating species, using known taxa that accumulate REEs. A total of 4425 specimens, taken in the two main evolutionary lineages of extant vascular plants, were analysed, including the two fern families Blechnaceae (n = 561) and Gleicheniaceae (n = 1310), and the two flowering plant families Phytolaccaceae (n = 1137) and Juglandaceae (n = 1417). KEY RESULTS: Yttrium (Y) was used as a proxy for REEs for methodological reasons, and a total of 268 specimens belonging to the genera Blechnopsis (n = 149), Dicranopteris (n = 75), Gleichenella (n = 32), Phytolacca (n = 6), Carya (n = 4), Juglans (n = 1) and Sticherus (n = 1) were identified with Y concentrations ranging from the limit of detection (LOD) >49 µg g-1 up to 1424 µg g-1. Subsequently, analysis of fragments of selected specimens by inductively coupled plasma atomic emission spectroscopy (ICP-AES) revealed that this translated to up to 6423 µg total REEs g-1 in Dicranopteris linearis and up to 4278 µg total REEs g-1 in Blechnopsis orientalis which are among the highest values ever recorded for REE hyperaccumulation in plants. It also proved the validity of Y as an indicator for REEs in XRF analysis of herbarium specimens. The presence of manganese (Mn) and zinc (Zn) was also studied by XRF in the selected specimens. Mn was detected in 1440 specimens ranging from the detection limit at 116 µg g-1 up to 3807 µg g-1 whilst Zn was detected in 345 specimens ranging from the detection limit at 77 µg g-1 up to 938 µg g-1. CONCLUSIONS AND IMPLICATIONS: This study led to the discovery of REE accumulation in a range of plant species, substantially higher concentrations in species known to be REE hyperaccumulators, and records of REE hyperaccumulators outside of the well-studied populations in China.

Uncovering the physiology and distribution of thallium in Tl-hyperaccumulating and Tl-sensitive populations of Biscutella laevigata L.

BACKGROUND AND AIMS: Thallium (Tl) is extremely toxic to all lifeforms and an emerging pollutant. Plants in the Brassicaceae family, including edible crops, have an enhanced capacity for Tl accumulation, even from soils with low thallium concentration. The most extreme Tl hyperaccumulator is Biscutella laevigata, capable of attaining >32,000 µg Tl g-1 DW in its leaves. METHODS: Biscutella laevigata from a non-metallicolous accession (Feltre, Italy) and a metallicolous accession (Les Malines, France) were subjected to a dosing experiment in hydroponics (0, 5, 30 µM Tl), followed by synchrotron-based µXRF analysis to elucidate tissue and cellular-level Tl distribution. KEY RESULTS: Flow cytometric data on the two used accessions showed the Feltre accession has a genome size twice of that of the Les Malines accession (256 and 125 pg/2C respectively), suggesting they are phylogenetically distant populations. The Feltre accession does not accumulate Tl (125 µg Tl g-1 DW on average in leaves) at the 5 µM Tl dose level, whereas the Les Malines accession had a mean of 1750 µg Tl g-1 DW, with peaks of 24,130 µg Tl g-1 DW at the 30 µM Tl dose level. At 30 µM Tl the non-metallicolous accession did not grow, and at 5 µM Tl showed reduced biomasss compared to the metallicolous one. In Les Malines accession, the synchrotron-based µXRF analysis revealed that Tl is localised in the vacuoles of epidermal cells, especially underneath trichomes and in trichome basal cells. Thallium also occurs in solid crystalline deposits (3-5 µm in size, ~40 wt% Tl) that are mainly found in foliar margins and under trichome bases. CONCLUSIONS: Biscutella laevigata is an attractive model for studying Tl hypertolerance and hyperaccumulation on account of the extreme expression of this trait, and its marked intraspecific variability.

Skin surface debris as an archive of environmental traces: an investigation through the naked eye, episcopic microscope, ED-XRF, and SEM-EDX.

Traces from bodies can be of various nature, for example of biological or inorganic origin. Some of these historically have received more consideration than others in forensic practice. Samplings of gunshot residues or biological fluid traces are commonly standardized, whereas macroscopically invisible environmental traces are usually ignored. This paper simulated the interaction between a cadaver and a crime scene by placing skin samples on the ground of five different workplaces and inside the trunk of a car. Traces on samples were then investigated through different approaches: the naked eye, episcopic microscope, Scanning Electron Microscopy (SEM) with Energy-dispersive X-ray spectroscopy (EDX) and Energy Dispersive X-Ray Fluorescence (ED-XRF). The purpose is to provide the forensic scientist with the awareness of the value of debris on skin and then to highlight implications for forensic investigations. Results demonstrated that even naked eye observation can reveal useful trace materials, for defining the possible surrounding environment. As a next step, the episcopic microscope can increase the number of visible particulates and their analysis. In parallel, the ED-XRF spectroscopy can be useful to add a first chemical composition to the morphological data. Finally, the SEM-EDX analysis on small samples can provide the greatest morphological detail and the most complete chemical analysis, although limited, like the previous technique, to inorganic matrices. The analysis of debris on the skin, even with the difficulties due to the presence of contaminants, can provide information on the environments involved in criminal events that can add to the investigation framework.

Reference-free x-ray fluorescence analysis with a micrometer-sized incident beam.

Spatially resolved x-ray fluorescence (XRF) based analysis employing incident beam sizes in the low micrometer range (µXRF) is widely used to study lateral composition changes of various types of microstructured samples. However, up to now the quantitative analysis of such experimental datasets could only be realized employing adequate calibration or reference specimen. In this work, we extent the applicability of the so-called reference-free XRF approach to enable reference-freeµXRF analysis. Here, no calibration specimen are needed in order to derive a quantitative and position sensitive composition of the sample of interest. The necessary instrumental steps to realize reference-freeµXRF are explained and a validation of ref.-freeµXRF against ref.-free standard XRF is performed employing laterally homogeneous samples. Finally, an application example from semiconductor research is shown, where the lateral sample features require the usage of ref.-freeµXRF for quantitative analysis.

Serendipita indica Drives Sulfur-Related Microbiota in Enhancing Growth of Hyperaccumulator Sedum alfredii and Facilitating Soil Cadmium Remediation.

Endophytic fungus Serendipita indica can bolster plant growth and confer protection against various biotic and abiotic stresses. However, S. indica-reshaped rhizosphere microecology interactions and root-soil interface processes in situ at the submicrometer scale remain poorly understood. We combined amplicon sequencing and high-resolution nano X-ray fluorescence (nano-XRF) imaging of the root-soil interface to reveal cadmium (Cd) rhizosphere processes. S. indica can successfully colonize the roots of Sedum alfredii Hance, which induces a remarkable increase in shoot biomass by 211.32% and Cd accumulation by 235.72%. Nano-XRF images showed that S. indica colonization altered the Cd distribution in the rhizosphere and facilitated the proximity of more Cd and sulfur (S) to enter the roots and transport to the shoot. Furthermore, the rhizosphere-enriched microbiota demonstrated a more stable network structure after the S. indica inoculation. Keystone species were strongly associated with growth promotion and Cd absorption. For example, Comamonadaceae are closely related to the organic acid cycle and S bioavailability, which could facilitate Cd and S accumulation in plants. Meanwhile, Sphingomonadaceae could release auxin and boost plant biomass. In summary, we construct a mutualism system for beneficial fungi and hyperaccumulation plants, which facilitates high-efficient remediation of Cd-contaminated soils by restructuring the rhizosphere microbiota.

Recycled Iron Phosphates: A New Phosphorus Fertilizer for Paddy Rice.

The potential of recycled iron phosphates (FePs), e.g., vivianites (Fe3(PO4)2·8H2O) and Fe(III)-rich phosphorus (P) adsorbent materials, as phosphorus fertilizer is limited by the strong interaction between Fe and P. In this study, the efficiency of FePs as P fertilizer was explored by applying them as granules or powder in flooded strongly P-fixing soils (acid and calcareous), thereby taking advantage of increased P release induced by reductive dissolution of P-bearing Fe(III) minerals. First, no P diffusion from granular FeP fertilizers into flooded soils was detectable by the diffusive gradient in thin films (DGT) technique and microfocused X-ray fluorescence (µ-XRF) analysis of thin soil sections, in contrast to detectable P diffusion away from granules of soluble triple superphosphate (TSP) fertilizer. On the contrary, powdered FePs demonstrated an excellent increase in extractable P (1 mM CaCl2) in a 120-day incubation experiment in flooded soils. Second, a pot experiment was performed with rice (Oryza sativa) grown in flooded acid and calcareous soils. The fertilizer value of FePs was remarkable when dosed as powder, as it was even up to 3-fold higher than TSP in the acid soil and similar to TSP in the calcareous soil. The beneficial effect of FeP over TSP in the acid soil is attributed to the slow release of P from FePs, which allows to partly overcome P fixation. The promising results of FePs as P fertilizer applied as powders in flooded soils debunk the generally accepted idea that FePs are poor sources of P while demonstrating the importance of the timing of FeP fertilizer application.

Temporal and spatial resolution of magnetosome degradation at the subcellular level in a 3D lung carcinoma model.

Magnetic nanoparticles offer many exciting possibilities in biomedicine, from cell imaging to cancer treatment. One of the currently researched nanoparticles are magnetosomes, magnetite nanoparticles of high chemical purity synthesized by magnetotactic bacteria. Despite their therapeutic potential, very little is known about their degradation in human cells, and even less so of their degradation within tumours. In an effort to explore the potential of magnetosomes for cancer treatment, we have explored their degradation process in a 3D human lung carcinoma model at the subcellular level and with nanometre scale resolution. We have used state of the art hard X-ray probes (nano-XANES and nano-XRF), which allow for identification of distinct iron phases in each region of the cell. Our results reveal the progression of magnetite oxidation to maghemite within magnetosomes, and the biosynthesis of magnetite and ferrihydrite by ferritin.

Athyrium yokoscense, a cadmium-hypertolerant fern, exhibits two cadmium stress mitigation strategies in its roots and aerial parts.

Athyrium yokoscense is hypertolerant to cadmium (Cd) and can grow normally under a high Cd concentration despite Cd being a highly toxic heavy metal. To mitigate Cd stress in general plant species, Cd is promptly chelated with a thiol compound and is isolated into vacuoles. Generated active oxygen species (ROS) in the cytoplasm are removed by reduced glutathione. However, we found many differences in the countermeasures in A. yokoscense. Thiol compounds accumulated in the stele of the roots, although a long-term Cd exposure induced Cd accumulation in the aerial parts. Synchrotron radiation-based X-ray fluorescence (SR-XRF) analysis indicated that a large amount of Cd was localized in the cell walls of the roots. Overexpression of AyNramp5a, encoding a representative Fe and Mn transporter of A. yokoscense, increased both Cd uptake and Fe and Mn uptake in rice calli under the Cd exposure conditions. Organic acids are known to play a key role in reducing Cd availability to the plants by forming chelation and preventing its entry in free form into the roots. In A. yokoscense roots, Organic acids were abundantly detected. Investigating the chemical forms of the Cd molecules by X-ray absorption fine structure (XAFS) analysis detected many compounds with Cd-oxygen (Cd-O) binding in A. yokoscense roots, whereas in the aerial parts, the ratio of the compounds with Cd-sulfur (Cd-S) binding was increased. Together, our results imply that the strong Cd tolerance of A. yokoscense is an attribute of the following two mechanisms: Cd-O compound formation in the cell wall is a barrier to reduce Cd uptake into aerial parts. Thiol compounds in the region of root stele are involved in detoxication of Cd by formation of Cd-S compounds.

Single-cell visualization and quantification of trace metals in Chlamydomonas lysosome-related organelles.

The acidocalcisome is an acidic organelle in the cytosol of eukaryotes, defined by its low pH and high calcium and polyphosphate content. It is visualized as an electron-dense object by transmission electron microscopy (TEM) or described with mass spectrometry (MS)-based imaging techniques or multimodal X-ray fluorescence microscopy (XFM) based on its unique elemental composition. Compared with MS-based imaging techniques, XFM offers the additional advantage of absolute quantification of trace metal content, since sectioning of the cell is not required and metabolic states can be preserved rapidly by either vitrification or chemical fixation. We employed XFM in Chlamydomonas reinhardtii to determine single-cell and organelle trace metal quotas within algal cells in situations of trace metal overaccumulation (Fe and Cu). We found up to 70% of the cellular Cu and 80% of Fe sequestered in acidocalcisomes in these conditions and identified two distinct populations of acidocalcisomes, defined by their unique trace elemental makeup. We utilized the vtc1 mutant, defective in polyphosphate synthesis and failing to accumulate Ca, to show that Fe sequestration is not dependent on either. Finally, quantitation of the Fe and Cu contents of individual cells and compartments via XFM, over a range of cellular metal quotas created by nutritional and genetic perturbations, indicated excellent correlation with bulk data from corresponding cell cultures, establishing a framework to distinguish the nutritional status of single cells.

Effects of particle size on toxicity, bioaccumulation, and translocation of zinc oxide nanoparticles to bok choy (Brassica chinensis L.) in garden soil.

The indiscriminate use of zinc oxide nanoparticles (ZnO NPs) in daily life can lead to their release into soil environment. These ZnO NPs can be taken up by crops and translocated to their edible part, potentially causing risks to the ecosystem and human health. In this study, we conducted pot experiments to determine phytotoxicity, bioaccumulation and translocation depending on the size (10 - 30 nm, 80 - 200 nm and 300 nm diameter) and concentration (0, 100, 500 and 1000 mg Zn/kg) of ZnO NPs and Zn ion (Zn2+) in bok choy, a leafy green vegetable crop. After 14 days of exposure, our results showed that large-sized ZnO NPs (i.e., 300 nm) at the highest concentration exhibited greater phytotoxicity, including obstruction of leaf and root weight (42.5 % and 33.8 %, respectively) and reduction of chlorophyll a and b content (50.2 % and 85.2 %, respectively), as well as changes in the activities of oxidative stress responses compared to those of small-sized ZnO NPs, although their translocation ability was relatively lower than that of smaller ones. The translocation factor (TF) values decreased as the size of ZnO NPs increased, with TF values of 0.68 for 10 - 30 nm, 0.55 for 80 - 200 nm, and 0.27 for 300 nm ZnO NPs, all at the highest exposure concentration. Both the results of micro X-ray fluorescence (µ-XRF) spectrometer and bio-transmission electron microscopy (bio-TEM) showed that the Zn elements were mainly localized at the edges of leaves exposed to small-sized ZnO NPs. However, the Zn elements upon exposure to large-sized ZnO NP were primarily observed in the primary veins of leaves in the µ-XRF data, indicating a limitation in their ability to translocate from roots to leaves. This study not only advances our comprehension of the environmental impact of nanotechnology but also holds considerable implications for the future of sustainable agriculture and food safety.

Machine Learning-Based Classification of Soil Parent Materials Using Elemental Concentration and Vis-NIR Data.

In soil science, the allocation of soil samples to their respective origins holds paramount significance, as it serves as a crucial investigative tool. In recent times, with the increasing use of proximal sensing and advancements in machine-learning techniques, new approaches have accompanied these developments, enhancing the effectiveness of soil utilization in soil science. This study investigates soil classification based on four parent materials. For this purpose, a total of 59 soil samples were collected from 12 profiles and the vicinity of each profile at a depth of 0-30 cm. Surface soil samples were analyzed for elemental concentrations using X-Ray fluorescence (XRF) and inductively coupled plasma-optical emission spectrometry (ICP-OES) and soil spectra using a visible near-infrared (Vis-NIR) spectrometer. Soil samples collected from soil profiles (12 soil samples) and surface (47 soil samples) were used to classify parent materials using machine learning-based algorithms such as Support Vector Machine (SVM), Ensemble Subspace k-Near Neighbor (ESKNN), and Ensemble Bagged Trees (EBTs). Additionally, as a validation of the classification techniques, the dataset was subjected to five-fold cross-validation and independent sample set splitting (80% calibration and 20% validation). Evaluation metrics such as accuracy, F score, and G mean were used to evaluate prediction performance. Depending on the dataset and algorithm used, the classification success rates varied between 70% and 100%. Overall, the ESKNN (99%) produced better results than other classification methods. Additionally, Relief algorithms were employed to identify key variables for each dataset (ICP-OES: CaO, Fe2O3, Al2O3, MgO, and MnO; XRF: SiO2, CaO, Fe2O3, Al2O, and MnO; Vis-NIR: 567, 571, 572, 573, and 574 nm). Subsequent soil reclassification using these reduced variables revealed reduced accuracies using Vis-NIR data, with ESKNN still yielding the best results.

Multi-Elemental Analysis of Hair and Fingernails Using Energy-Dispersive X-ray Fluorescence (ED XRF) Method Supported by Inductively Coupled Plasma Mass Spectrometry (ICP MS).

This work compared the multi-element analysis of human hair and nails using inductively coupled plasma mass spectrometry (ICP MS) with an easy, fast, cheap, non-destructive method using energy-dispersive x-ray fluorescence (ED XRF). The ICP MS-based method was more sensitive (over 30 elements could be quantified) and costly (requiring more time, samples, and chemicals). The EDX-based method required laboratory and certified reference materials made of hair for instrument calibration. It was less sensitive (16 elements could be quantified: S, Si, Ca, Br, Fe, Cu, Cr, Mg, Si, K, Mn, Ni, Zn, Se, Sr, Pb), but it allowed us to replace troublesome grinding with the dissolution of keratin-based material with an alkalic agent (tetramethylammonium hydroxide, TMAH) and the formation of stable-for-days pellets. This method is simple, enables automation, and, due to the modification of wells in the autosampler of the EDX system via the immersion of home-designed inserts, it requires smaller amounts of biological material and binder (down to 70 mg instead of 500 mg required by commercially available instrument) to perform analysis. It was concluded that the EDX-based method offers complementary selectivity and sensitivity to ICP MS with the possibility of sample reuse for further analysis.

Multivariate analysis applied to X-ray fluorescence to assess soil contamination pathways: case studies of mass magnetic susceptibility in soils near abandoned coal and W/Sn mines.

Determining the origin and pathways of contaminants in the natural environment is key to informing any mitigation process. The mass magnetic susceptibility of soils allows a rapid method to measure the concentration of magnetic minerals, derived from anthropogenic activities such as mining or industrial processes, i.e., smelting metals (technogenic origin), or from the local bedrock (of geogenic origin). This is especially effective when combined with rapid geochemical analyses of soils. The use of multivariate analysis (MVA) elucidates complex multiple-component relationships between soil geochemistry and magnetic susceptibility. In the case of soil mining sites, X-ray fluorescence (XRF) spectroscopic data of soils contaminated by mine waste shows statistically significant relationships between magnetic susceptibility and some base metal species (e.g., Fe, Pb, Zn, etc.). Here, we show how qualitative and quantitative MVA methodologies can be used to assess soil contamination pathways using mass magnetic susceptibility and XRF spectra of soils near abandoned coal and W/Sn mines (NW Portugal). Principal component analysis (PCA) showed how the first two primary components (PC-1 + PC-2) explained 94% of the sample variability, grouped them according to their geochemistry and magnetic susceptibility in to geogenic and technogenic groups. Regression analyses showed a strong positive correlation (R2 > 0.95) between soil geochemistry and magnetic properties at the local scale. These parameters provided an insight into the multi-element variables that control magnetic susceptibility and indicated the possibility of efficient assessment of potentially contaminated sites through mass-specific soil magnetism.

Fluorine contamination, mobility, and risks in soils at a phosphate-gypsum waste landfill: a new analytical method and comparison with previous methods.

This study used a new X-ray fluorescence (XRF)-based analytical method with better precision and sensitivity to evaluate the fluorine concentrations in soil. It was hypothesized that the XRF method with a pellet-synthesizing procedure may effectively analyze the fluorine concentrations in soil with ease and reliability. The total fluorine concentrations determined using XRF were compared with those determined using three different types of analytical protocols-incineration/distillation, alkaline fusion, and aqua regia extraction procedures. Among the three procedures, the incineration/distillation procedure did not show reliable precision and reproducibility. In contrast, the total fluorine concentrations determined using the XRF analysis were linearly correlated with those determined using the alkaline fusion and aqua regia extraction procedures. Based on the results of the Korean waste leaching procedure and toxicity characteristics leaching procedure, the leachability of fluorine from soil and waste was not directly related to total fluorine concentrations in soil. Risk assessment also revealed that the fluorine-rich soils did not show non-carcinogenic toxic effects, despite exceeding the regulation level (800 mg/kg) in South Korea for total fluorine concentrations in soil. Our results suggest that XRF analysis in combination with the newly developed pretreatment method may be a promising alternative procedure for easily and rapidly determining the total fluorine concentration in soil. However, further efforts are needed to evaluate fluorine leachability and its associated risks in fluorine-contaminated soils.

Synchrotron induced X-ray fluorescence spectroscopy reveals heavy metal translocation in sludge amended soil-plant systems: assessment of ecological and health risks.

The use of composted sludge from sewage treatment plants as a soil amendment is a common practice of recycling nutrients like organic carbon, nitrogen, and phosphorus. The sewage generated in larger cities of developing countries is often contaminated with various heavy metals (HMs) that ultimately end up in composted sludge. Thus, using such composted sludge is likely to pose ecological and human health risks. Hence, the knowledge of HM translocation in sludge-soil-plant systems is of vital importance. The present study was aimed at investigating the HM translocation in sludge-soil-plant system. The HM translocation was measured using synchrotron radiation-induced x-ray fluorescence spectrometry and atomic absorption spectroscopic techniques. The results indicated high HM mobility (up to 2628.5 mg kg-1) from sludge to spinach plant. The metal accumulation (mg kg-1) ranged in the order-Fe (950.55-2628.5) > Zn (20.11-172.13) > Cu (13.86-136.17) > Mn (2.13-34.67) > Cd (0.11-31.17) > Pb (1.50-30.16) > Co (0.18-9.85) As (0.02-7.80) > Cr (0.01-5.69). This observed accumulation depended on the volume of sewage being treated in the sewage treatment plant (STP) and varied in the order control < (8 MLD Bhagwanpur, STP 1) < (80 MLD Dinapur, STP2) < (140 MLD Dinapur, STP3) hence the HM load coming into STPs. The metal transfer factor, bioconcentration factor, and translocation factor values also correlated with the abundance of Fe, Cu, Pb, Cd, and Zn in spinach root and shoot compartments. The carcinogenic risk for heavy metal carcinogens like As, Cd, Cr, and Pb revealed children being more prone to cancer upon spinach consumption. Hence, it is necessary to assess the heavy metals present in the sludge prior to its application in agricultural fields.

Material Characterisation of William Burges' Great Bookcase within the Disruption of a Global Pandemic.

This contribution presents the results of a technical investigation on the pigments of William Burges' Great Bookcase (1859-62), preserved at the Ashmolean Museum. It is the first thorough material investigation of a remarkable piece of Gothic Revival painted furniture, notably an artwork by Burges, whose work has so far received little attention from a technical point of view. This study was developed during the Covid-19 pandemic, which significantly affected the planned research activities since the investigation relied extensively on collaborations with institutions within and beyond the University of Oxford. The disruption caused by the lockdown and other restrictions went far beyond any prediction and led us to redefine the project's outcome and methodology 'on the fly' while maintaining its overall vision. However, thanks to the timeliness of a substantial research grant received from the Capability for Collection Fund (CapCo, Art and Humanities Research Council), we could ultimately turn this research into a unique opportunity to test the potential of recently acquired instruments, namely the Opus Apollo infrared camera and the Bruker CRONO XRF mapping spectrometer. Therefore, besides reporting on the findings, this contribution outlines the strategy adopted and assesses the new equipment's capability for the non-invasive analysis of complex polychromies.

Quantitative Element-Sensitive Analysis of Individual Nanoobjects.

A reliable and quantitative material analysis is crucial for assessing new technological processes, especially to facilitate a quantitative understanding of advanced material properties at the nanoscale. To this end, X-ray fluorescence microscopy techniques can offer an element-sensitive and non-destructive tool for the investigation of a wide range of nanotechnological materials. Since X-ray radiation provides information depths of up to the microscale, even stratified or buried arrangements are easily accessible without invasive sample preparation. However, in terms of the quantification capabilities, these approaches are usually restricted to a qualitative or semi-quantitative analysis at the nanoscale. Relying on comparable reference nanomaterials is often not straightforward or impossible because the development of innovative nanomaterials has proven to be more fast-paced than any development process for appropriate reference materials. The present work corroborates that a traceable quantification of individual nanoobjects can be realized by means of an X-ray fluorescence microscope when utilizing rather conventional but well-calibrated instrumentation instead of reference materials. As a proof of concept, the total number of atoms forming a germanium nanoobject is quantified using soft X-ray radiation. Furthermore, complementary dimensional parameters of such objects are reconstructed.

A new full-field XRF imaging station at Synchrotron Light Research Institute.

A full-field X-ray fluorescence imaging (FXI) station was recently developed at beamline BL8 of Synchrotron Light Research Institute (SLRI), Thailand. An unfocused, synchrotron X-ray beam from the bending magnet with a size of 2 mm (vertical) × 13 mm (horizontal) and photon energy of 10 keV was employed in the FXI experiments. A sample stage was tilted by 7.5° to enlarge the vertical beam size. X-ray fluorescence images were recorded by an energy-dispersive, 256 × 256 array, pn-type charge coupled device detector equipped with a polycapillary optics, providing a full-frame image size of 12.3 mm × 12.3 mm. The incident photon flux per pixel was 3 × 104 photons s-1 (100 mA)-1 and the experimental spatial resolution was 68 µm. Image processing was carried out offline using an in-house MATLAB program capable of elemental selection and inhomogeneity intensity correction. Elemental detection limits of FXI were found to decrease with increasing atomic number, i.e. 0.3 to 0.03 wt% for Z = 19 (K) to 30 (Zn). Compared with the BL6b microbeam imaging (µXI) station at SLRI with higher photon flux per pixel, 3 × 1010 photons s-1 (100 mA)-1, a tenfold sample area can be obtained and 13 times higher peak-to-background (PKB) ratio at Zn Kα measured with the same experimental time (8 h). Simultaneous measurement of FXI is more time-efficient against the long overhead times of µXI scanning over large pixel numbers, >65000. To demonstrate potential applications of the new FXI station, various types of samples were examined: dendritic limestone, ancient bronze and dried fish. Analyzed elemental images enabled us to identify areas rich in Mn on the limestone, Sn and Cu separation in the bronze, and Zn nutrition in the dried fish eye.

Elemental profiles in distant tissues during tumor progression.

BACKGROUND: Essential elements have functions in tumor progression by promoting protumoral cellular processes, such as proliferation, and migration, among others. Obtaining an understanding of how these elements relate to tumor progression processes is of great importance for research. Elemental profile studies in distant tissues, which can be modulated by tumor cells to promote metastasis, have not been sufficiently investigated. The main goal of this study is to evaluate multielemental distribution during tumor progression, focusing on tumor tissue and distant tissues that may be affected. METHODS: Tumor progression in vivo was simulated by inoculating C57BL/6 mice with Lewis Lung Carcinoma (LLC) cells. Samples of the primary tumor and distant tissues were collected during 5 weeks of tumor progression for the control and experimental (tumor-bearing) groups. The biological samples were analyzed using the synchrotron radiation X-Ray fluorescence technique. Data on the concentration of P, S, K, Ca, Mn, Fe, Cu, and Zn in the samples were obtained and statistically analyzed to evaluate the distribution of the elements during tumor progression in the primary tumor as well as distant tissues. RESULTS: It was possible to observe significant changes in the concentrations' distribution of P, S, K, Ca, Mn, Fe, and Cu in distant tissues caused by the presence of tumor cells. It was also possible to detect a greater similarity between tumor tissue (which has the lung as tissue of origin) and a tissue of non-origin, such as the liver, which is an unprecedented result. Moreover, changes in the distributions of concentrations were detected and studied over time for the different tissues analyzed, such as primary tumor, liver and lung, in Control and Tumor groups. CONCLUSIONS: Among other results, this paper could explore the modulation of distant tissues caused by the presence of a primary tumor. This could be achieved by the evaluation of several elements of known biological importance allowing the study of different biological processes involved in cancer. The role of essential elements as modulators of the tumor microenvironment is a relevant aspect of tumor progression and this work is a contribution to the field of tumoral metallomics.