Community Masks - from an Emergency Solution to an Innovation Booster for the Textile Industry.

The COVID-19 pandemic resulted in shortages of personal protective equipment and medical devices in the initial phase. Agile small and medium-sized enterprises from regional textile industries reacted quickly. They delivered alternative products such as textile-based community masks in collaboration with industrial partners and research institutes from various sectors. The current mask materials and designs were further improved by integrating textiles with antiviral and antimicrobial properties and enhanced protection and comfort by novel textile/membrane combinations, key factors to increase the acceptance and compliance of mask wearing. The innocuity and sustainability of masks, as well as taking into account particular needs of vulnerable persons in our society, are new fields for textile-based innovations. These innovations developed for the next generation of facemasks have a high adaptability to other product segments, which make textiles an attractive material for hygienic applications and beyond.

Breathable Textile Rectangular Ring Microstrip Patch Antenna at 2.45 GHz for Wearable Applications.

A textile patch antenna is an attractive package for wearable applications as it offers flexibility, less weight, easy integration into the garment and better comfort to the wearer. When it comes to wearability, above all, comfort comes ahead of the rest of the properties. The air permeability and the water vapor permeability of textiles are linked to the thermophysiological comfort of the wearer as they help to improve the breathability of textiles. This paper includes the construction of a breathable textile rectangular ring microstrip patch antenna with improved water vapor permeability. A selection of high air permeable conductive fabrics and 3-dimensional knitted spacer dielectric substrates was made to ensure better water vapor permeability of the breathable textile rectangular ring microstrip patch antenna. To further improve the water vapor permeability of the breathable textile rectangular ring microstrip patch antenna, a novel approach of inserting a large number of small-sized holes of 1 mm diameter in the conductive layers (the patch and the ground plane) of the antenna was adopted. Besides this, the insertion of a large number of small-sized holes improved the flexibility of the rectangular ring microstrip patch antenna. The result was a breathable perforated (with small-sized holes) textile rectangular ring microstrip patch antenna with the water vapor permeability as high as 5296.70 g/m2 per day, an air permeability as high as 510 mm/s, and with radiation gains being 4.2 dBi and 5.4 dBi in the E-plane and H-plane, respectively. The antenna was designed to resonate for the Industrial, Scientific and Medical band at a specific 2.45 GHz frequency.

A novel process for preparing fireproofing materials from various industrial wastes.

In the current study, the possibility of incorporating various industrial wastes into fireproofing materials was investigated. It was found that the newly developed materials showed excellent air sealing and fireproofing performance, with air permeability coefficients 3 to 4 orders of magnitude smaller than traditional fire prevention materials. The influence of different parameters on the air permeability was investigated, and the air sealing mechanisms were clarified through microstructure analysis. In addition, the workability and mechanical properties of the fireproofing materials for practical application in coal mine were studied. The new materials derived from industrial wastes had a compact and monolithic structure, and the excellent air tightness could be attributed to the pozzolanic activity of the industrial wastes and the film-forming property of organic polymers. Among the industrial wastes examined, a special coal fly ash with high pozzolanic activity and little free calcium oxide derived the best product with air permeability coefficient, tensile strength and breaking elongation of 4.17 × 10-8 m2/s, 2.14 MPa and 48.90%, respectively. This study provides an economical, environmentally friendly and promising approach for industrial wastes recycling.

Laboratory test investigations on soil water characteristic curve and air permeability of municipal solid waste.

The air permeability coefficient has a high correlation with the water content of municipal solid waste. In this study, continuous drying methodology using a tension meter was employed to construct the soil water characteristic curve of municipal solid waste (M-SWCC). The municipal solid waste air permeability test was conducted by a newly designed apparatus. The measured M-SWCC was well reproduced by the van Genuchten (V-G) model and was used to predict the parameters of typical points in M-SWCC, including saturated water content, field capacity, residual water content and water content at the inflection point. It was found that the M-SWCC was significantly influenced by void ratio. The final evaporation and test period of M-SWCC increase with the increase in void ratio of municipal solid waste. The evolution of air permeability coefficient with water content of municipal solid waste depicted three distinct characteristic stages. It was observed that the water contents that corresponded to the two cut-off points of the three stages were residual water content and water content at the inflection point, respectively. The air permeability coefficient of municipal solid waste decreased with the increase of the water content from zero to the residual water content. The air permeability coefficient was almost invariable when the water content increased from residual water content to the water content at the inflection point. When the water content of municipal solid waste exceeded the water content at the inflection point, the air permeability coefficient sharply decreased with the increase of water content.

Clothing resultant thermal insulation determined on a movable thermal manikin. Part I: effects of wind and body movement on total insulation.

In this serial study, 486 thermal manikin tests were carried out to examine the effects of air velocity and walking speed on both total and local clothing thermal insulations. Seventeen clothing ensembles with different layers (i.e., one, two, or three layers) were selected for the study. Three different wind speeds (0.15, 1.55, 4.0 m/s) and three levels of walking speed (0, 0.75, 1.2 m/s) were chosen. Thus, there are totally nine different testing conditions. The clothing total insulation and local clothing insulation at different body parts under those nine conditions were determined. In part I, empirical equations for estimating total resultant clothing insulation as a function of the static thermal insulation, relative air velocity, and walking speed were developed. In part II, the local thermal insulation of various garments was analyzed and correction equations on local resultant insulation for each body part were developed. This study provides critical database for potential applications in thermal comfort study, modeling of human thermal strain, and functional clothing design and engineering.

Heparin-modified polyether ether ketone hollow fiber membrane with improved hemocompatibility and air permeability used for extracorporeal membrane oxygenation.

To expand the selection of raw material for fabricating extracorporeal membrane oxygenation (ECMO) and promote its application in lung disease therapy, polyether ether ketone hollow fiber membrane (PEEK-HFM) with designable pore characteristics, desired mechanical performances, and excellent biocompatibility was selected as the potential substitute for existing poly (4-methyl-1-pentene) hollow fiber membrane (PMP-HFM). To address the platelet adhesion and plasma leakage issues with PEEK-HFM, a natural anticoagulant heparin was grafted onto the surface using ultraviolet irradiation. Additionally, to explore the substitutability of the heparin layer while considering cost and scalability, a heparin-like layer composed of copolymers of acrylic acid and sodium p-styrenesulfonate was also constructed on the surface of PEEK-HFM Even though the successful grafting of heparin and heparin-like layers on the PEEK-HFM surface reduced the pore parameters, improvements in surface hydrophilicity also prevented the platelet-adhesion phenomenon and improved the anticoagulant behaviour, making it a viable alternative for commercial PMP-HFMs in ECMO production. Furthermore heparin-modified and heparin-like modified PEEK-HFMs demonstrated similar performance, indicating that synthetic layers can effectively replace natural heparin. This study holds practical and instructive significance for future research and the application of membranes in the development of oxygenators.

Permeable Properties of Hygienic Nonwovens Bonded Using Mechanical, Chemical, and Thermal Techniques.

The demand for hygienic nonwovens has increased, especially since 2020. As expected, the market for nonwovens showed an increase during the COVID-19 outbreak, especially in the medical and hygienic nonwovens sector. The aim of this study is to analyse the influence of the permeability properties of hygienic nonwovens that have been mechanically, chemically, and thermally bonded. Hygienic nonwovens are lightweight (from 20 to 120 g/m2), produced by carding (roller carding), and are bonded using three different bonding processes (mechanical, thermal, and chemical). Hygienic nonwovens are intended for protective clothing in hospitals. For the experimental part, the seven different nonwovens used for hygienic purposes were produced using the dry laying process. The samples were produced in Tosama, a factory for sanitary supplies. The research results show that the nonwoven bonding processes have a significant influence on the structural, mechanical, and permeability properties.

Stretchable, Washable, and Anti-Ultraviolet i-Textile-Based Wearable Device for Motion Monitoring.

Smart textiles with multifunction and highly stable performance are essential for their application in wearable electronics. Despite the advancement of various smart textiles through the decoration of conductive materials on textile surfaces, improving their stability and functionality remains a challenging topic. In this study, we developed an ionic textile (i-textile) with air permeability, water resistance, UV resistance, and sensing capabilities through in situ photopolymerization of ionogel onto the textile surface. The i-textile presents air permeability comparable to that of bare textile while possessing enhanced UV resistance. Remarkably, the i-textile maintains excellent electrical properties after washing 20 times or being subjected to 300 stretching cycles at 30% tension. When applied to human joint motion detection, the i-textile-based sensors can effectively distinguish joint motion based on their sensitivity and response speed. This research presents a novel method for developing smart textiles that further advances wearable electronics.

The Air Permeability and the Porosity of Polymer Materials Based on 3D-Printed Hybrid Non-Woven Needle-Punched Fabrics.

The possibility of controlling the porosity and, as a result, the permeability of fibrous non-woven fabrics was studied. Modification of experimental samples was performed on equipment with adjustable heating and compression. It was found that the modification regimes affected the formation of the porous structure. We found that there was a relationship between the permeability coefficient and the porosity coefficient of the materials when the modification speed and temperature were varied. A model is proposed for predicting the permeability for modified material with a given porosity. As the result, a new hybrid composite material with reversible dynamic color characteristics that changed under the influence of ultraviolet and/or thermal exposure was produced. The developed technology consists of: manufacture of the non-woven needle-punched fabrics, surface structuring, material extrusion, additive manufacturing (FFF technology) and the stencil technique of ink-layer adding. In our investigation, we (a) obtained fibrous polymer materials with a porosity gradient in thickness, (b) determined the dependence of the material's porosity coefficient on the speed and temperature of the modification and (c) developed a model for calculating the porosity coefficient of the materials with specified technological parameters.

Multiphase Under-Liquid Biofabrication With Living Soft Matter: A Route to Customize Functional Architectures With Microbial Nanocellulose.

The growth of aerobic microbes at air-water interfaces typically leads to biofilm formation. Herein, a fermentative alternative that relies on oil-water interfaces to support bacterial activity and aerotaxis is introduced. The process uses under-liquid biofabrication by structuring bacterial nanocellulose (BNC) to achieve tailorable architectures. Cellulose productivity in static conditions is first evaluated using sets of oil homologues, classified in order of polarity. The oils are shown for their ability to sustain bacterial growth and BNC production according to air transfer and solubilization, both of which impact the physiochemical properties of the produced biofilms. The latter are investigated in terms of their morphological (fibril size and network density), structural (crystallinity) and physical-mechanical (surface area and strength) features. The introduced under-liquid biofabrication is demonstrated for the generation of BNC-based macroscale architectures and compartmentalized soft matter. This can be accomplished following three different routes, namely, 3D under-liquid networking (multi-layer hydrogels/composites), emulsion templating (capsules, emulgels, porous materials), and anisotropic layering (Janus membranes). Overall, the proposed platform combines living matter and multi-phase systems as a robust option for material development with relevance in biomedicine, soft robotics, and bioremediation, among others.

Evaluation of the Impact of Parylene C Deposition Method on the Functional Properties of Fabrics.

The article presents the results of research on the impact of the use of an original, innovative method of deposition of Parylene C on the functional properties of fabrics with various potential applications (e.g., thermal and chemical protective clothing, packaging, covers and others). Verification of the effects of the method used was based on interdisciplinary research taking into account the impact of coating fabrics on changes in their structure (micro-CT), surface properties (contact angle), barrier properties (water and chemical liquid wetting), electrostatic properties (charge decay), biophysical properties describing heat and mass transfer (by the Alambeta system and thermal imaging) and flammable properties. Four fabrics made of synthetic organic fibres (meta-aramid, para-aramid) and natural inorganic fibres (basalt) were selected for testing. Given the complex structure of textile substrates, the results confirmed that the two assumed thicknesses of the Parylene C coating were consistent with the actual measurements. The findings indicated that the coatings significantly reduced water and acid absorption in the fabrics compared to unmodified ones. Thermal insulation property tests revealed that coated fabrics exhibited higher thermal conductivity than unmodified fabrics. Additionally, the presence of Parylene C on aramid fabrics resulted in a modest increase in their ignition resistance.

Enhanced fresh and hardened properties of foamed concrete modified with nano-silica.

Nowadays, the application of nanotechnology has gained increased attention in the concrete technology field. Several applications of concrete require light weight; one such concrete used is foamed concrete (FC), which has more voids in the microstructure. In this study, nano-silica (NS) was utilized, which exhibits a pozzolanic nature, and it reacts with other pozzolanic compositions (like lime, alumina, etc.) to form hydrated compounds in concrete. Apart from these hydrated compounds, NS acts as a filler material and enhances properties of concrete such as the fresh and hardened properties. This research examines the fresh, hardened, and microstructural properties of FC blended with NS. The ratio of binder and filler used in this research is 1:1.5, with a water-to-binder ratio of 0.45 and a density of 880 kg/m3. A total of six different weight fractions of NS were added to FC mixes, namely 0%, 1%, 2%, 3%, 4%, and 5%. Properties assessed for FC blended with NS were the slump, bulk density, strength parameters (flexural, splitting tensile, and compressive strengths), morphological analysis, water absorption, and porosity. It was concluded from this study that the optimum NS utilized to improve the properties was 3%. Apart from this, the relationship between the mechanical properties and NS dosages was developed. The correlations between the compressive strength and other properties were analyzed, and relationships were developed based on the best statistical approach. This study helps academicians, researchers, and industrialists enhance the properties of FC blended with NS and their relationships to predict concrete properties from other properties.

Experimental Study on the Manufacturing of Functional Paper with Modified by N-Methylmorpholine-N-oxide Surfaces.

The manufacturing of paper with new functional properties is a current problem today. A method of modifying the surface layer of paper by the partial dissolution of cellulose on its surface is proposed. N-Methylmorpholine-N-oxide (NMMO) is proposed for use as a solvent, the regeneration of which provides an environmentally friendly process. It was shown that among the possible hydrate forms of the solvent, the monohydrate and higher-melting forms are optimal for modifying the paper surface. The temperature-time modes of processing were revealed and the weight gain and density increase in the course of modification were estimated. The structural and morphological features of the original and modified paper were studied by X-ray imaging and scanning microscopy. The NMMO surface treatment makes it possible to vary the air permeability of the paper, making it practically non-permeable. The capillary and pore system were radically transformed after the partial dissolution of cellulose and its coagulation, as the formed cellulose film isolates them, which leads to a decrease in surface absorbency. The processing conditions allowing for the optimization of the optical and strength properties of the modified paper samples are revealed. The resulting paper with a modified N-methylmorpholine-N-oxide surface layer can be used for printing valuable documents.

Influence of Material Degradation on Deformation of Paraglider during Flight.

The aim of this article is to determine experimentally and numerically the influence of material degradation on the deformation of a paraglider during flight. The presented method regards numerical modeling of pressure distribution over the wing and its effect on paraglider behavior; the considerations are preceded by experiments on three types of Polyamide 6.6 paraglider fabrics, subjected and not subjected to thermal, UV and flexing degradation. Scanning electron microscope (SEM) records allowed to determine the structural characteristics of the analyzed samples. Air permeability and mechanical tests are the input data for the computational simulations. When a pressure drop of 200 Pa is applied, all the analyzed samples are impermeable, except for those damaged by flexing. Thus, flexing damage has the greatest influence on the air permeability change among all considered aging factors. Aging caused by UV radiation has the greatest influence on mechanical properties. No major influence of thermal ageing on the mechanical properties of the considered samples is observed. Safety factors of the considered materials not subjected to degradation range between 3.94 and 6.00. Safety factor of fabric no. 1 subjected to the UV degradation is equal to 1.33; this result does not secure a safe usage of the considered material. The methodology described in this research can help to predict paraglider covering materials' behavior in flight; it assumes many cases, i.e., applying a new material or the material at any point of its life cycle. Thus, the practical implications of this model supported by numerical methods may result in saving time and cost in producing prototypes, as well as potentially assessing the safety of used wings. Future research activity can introduce the application of different elastic-plastic damage models to determine the paraglider behavior during collapse.

Washable and Breathable Electret Sensors Based on a Hydro-Charging Technique for Smart Textiles.

Flexible electromechanical sensors based on electret materials have shown great application potential in wearable electronics. However, achieving great breathability yet maintaining good washability is still a challenge for traditional electret sensors. Herein, we report a washable and breathable electret sensor based on a hydro-charging technique, namely, hydro-charged electret sensor (HCES). The melt-blown polypropylene (MBPP) electret fabric can be charged while washing with water. The surface potential of MBPP electret fabric can be improved by optimizing the type of water, water pressure, water temperature, drying temperature, drying time, ambient air pressure, and ambient relative humidity. It is proposed that the single fiber has charges of different polarities on the upper and lower surfaces due to contact electrification with water, thereby forming electric dipoles between fibers, which can lead to better surface potential stability than the traditional corona-charging method. The HCES can achieve a high air permeability of ∼215 mm/s and sensitivity up to ∼0.21 V/Pa, with output voltage remaining stable after over 36,000 working cycles and multiple times of water washing. As a demonstration example, the HCES is integrated into a chest strap to monitor human respiration conditions.

Functional Properties of Nonwovens as an Insulating Layer for Protective Gloves.

The basic intention of the present work is to analyze the influence of the incorporated microporous membrane and the technology of the needling process on the functional properties of nonwovens designed as an insulating layer for protective gloves for protection against high temperatures. The investigated nonwovens are produced in carded nonwoven formation and mechanically bonded with needle bonding. The studied nonwovens contain a microporous membrane of polyester (PES) with a thickness of 20 µm (samples marked as ST and STL). In the theoretical part of the research work, the nonwovens and some technology stages are presented. The experimental part of the present work deals with the mechanical properties: breaking stress and strain, viscoelastic properties (yield strength, elastic modulus) and elastic recovery after cyclic loading and thermal conduction. In the experimental part, permeability properties (water vapor permeability, air permeability) are also analyzed. The results of the investigation show that the samples marked as ST and STL, which contain a microporous PES membrane, have a higher breaking stress than the samples marked as T and TL without the microporous PES membrane. Samples marked as ST and STL also exhibit higher values of elongation at break and limit of recoverable deformation (stress and strain at yield) and a lower modulus of elasticity than samples marked as T and TL. The samples marked as ST and STL are mechanically bonded to the lamellar plate using forked needles and therefore have a textured (ribbed) shape that affects the improved mechanical properties. The TL and STL samples, which contain a microporous PES membrane, have higher elastic recovery and lower air permeability than the T and TL samples, while water vapor permeability is lower only for the ST sample.

A Self-Pumping Dressing with Multiple Liquid Transport Channels for Wound Microclimate Management.

A microclimate with ventilation and proper wettability near the wound is vital for wound healing. In the case of pressure or absorption of large amounts of wound exudate, maintaining air circulation around the wound is currently a challenge for wound dressings. In this study, a novel self-pumping dressing (FAED) with multiple liquid transport channels is designed by combining a 3D spacer fabric, sodium alginate aerogel, and electrospun membrane. This unique structural design allows FAED to unidirectionally rapidly remove excess biofluid from the wound and transfer it through a special liquid transport channel to a liquid storage layer with a high absorption ratio. Importantly, the air circulation layer of FAED composed of liquid transport channels and spacer yarns provides excellent air permeability in both the horizontal (12.3 L min-1 ) and vertical (272.02 mm s-1 ) directions. Additionally, a lower compression modulus (0.14 MPa) and higher compression strength (0.15 MPa) enable the novel dressing to adapt to body contours and provide good supporting performance, as compared to foam dressings. Combined with its high biocompatibility, this unique dressing has significant potential for wound treatment and intensive care.

Extending the Protection Ability and Life Cycle of Medical Masks through the Washing Process.

The reuse of decontaminated disposable medical face masks can contribute to reducing the environmental burden of discarded masks. This research is focused on the effect of household and laboratory washing at 50 °C on the quality and functionality of the nonwoven structure of polypropylene medical masks by varying the washing procedure, bath composition, disinfectant agent, and number of washing cycles as a basis for reusability. The barrier properties of the medical mask were analyzed before and after the first and fifth washing cycle indirectly by measuring the contact angle of the liquid droplets with the front and back surface of the mask, further by measuring air permeability and determining antimicrobial resistance. Additional analysis included FTIR, pH of the material surface and aqueous extract, as well as the determination of residual substances-surfactants-in the aqueous extract of washed versus unwashed medical masks, while their aesthetic aspect was examined by measuring their spectral characteristics. The results showed that household washing had a stronger impact on the change of some functional properties, primarily air permeability, than laboratory washing. The addition of the disinfectant agent, didecyldimethylammonium chloride, contributes to the protective ability and supports the idea that washing of medical masks under controlled conditions can preserve barrier properties and enable reusability.

Incorporating Variable Porosity into the Determination of Effective Permeability in Interchanging Double Cloth Woven Fabrics Using Darcy's Law.

Woven fabrics are widely used for thermal protection due to their porosity, which provides thermal insulation and breathability. This research focuses on investigating the influential parameters in the thermal protective properties of layer interchanging double cloth, including the woven structure and varying yarn fineness. The properties affecting the protective properties and comfort of multilayered woven fabrics include the fabric thickness, fabric porosity, and air permeability. Darcy's law is applicable for determining the effective air permeability of woven fabrics. By understanding and controlling fabric porosity, it becomes possible to develop thermal protective clothing that combines improved comfort, cost-efficiency, and effectiveness. This study represents a novel approach for the clarification of airflow permeability behavior in complex structures of elastic multilayer woven fabrics using Darcy's law. This innovative approach expands the understanding of permeability in fabrics beyond single-layer fabrics with vertical pores or 3D fabrics used in resin injection processes.

Ultrathin Mo2S3 Nanowire Network for High-Sensitivity Breathable Piezoresistive Electronic Skins.

Flexible piezosensing electronic skins (e-skins) have attracted considerable interest owing to their applications in real-time human-health monitoring, human-machine interactions, and soft bionic robot perception. However, the fabrication of piezosensing e-skins with high sensitivity, biological affinity, and good permeability at the same time is challenging. Herein, we designed and synthesized Mo2S3 nanowires by inserting ∞1[Mo2+S] chains between MoS2 interlayers. The resulting Mo2S3 nanowires feature high conductivity (4.9 × 104 S m-1) and a high aspect ratio (∼200). An ultrathin (∼500 nm) Mo2S3 nanowire network was fabricated using a simple liquid/liquid interface self-assembly method, showing high piezoresistive sensitivity (5.65 kPa-1), a considerably low pressure detection limit (0.08 Pa), and gratifying air permeability. Moreover, this nanowire network can be directly attached to human skin for real-time human pulse detection, finger movement monitoring, and sign language recognition, exhibiting excellent potential for health monitoring and human-machine interactions.