RESUMO
High-entropy alloy nanoparticles (HEANs) possessing regulated defect structure and electron interaction exhibit a guideline for constructing multifunctional catalysts. However, the microstructure-activity relationship between active sites of HEANs for multifunctional electrocatalysts is rarely reported. In this work, HEANs distributed on multi-walled carbon nanotubes (HEAN/CNT) are prepared by Joule heating as an example to explain the mechanism of trifunctional electrocatalysis for oxygen reduction, oxygen evolution, and hydrogen evolution reaction. HEAN/CNT excels with unmatched stability, maintaining a 0.8V voltage window for 220 h in zinc-air batteries. Even after 20 h of water electrolysis, its performance remains undiminished, highlighting exceptional endurance and reliability. Moreover, the intrinsic characteristics of the defect structure and electron interaction for HEAN/CNT are investigated in detail. The electrocatalytic mechanism of trifunctional electrocatalysis of HEAN/CNT under different conditions is identified by in situ monitoring and theoretical calculation. Meanwhile, the electron interaction and adaptive regulation of active sites in the trifunctional electrocatalysis of HEANs were further verified by density functional theory. These findings could provide unique ideas for designing inexpensive multifunctional high-entropy electrocatalysts.
RESUMO
The multi-principal element alloy nanoparticles (MPEA NPs), a new class of nanomaterials, present a highly rewarding opportunity to explore new or vastly different functional properties than the traditional mono/bi/multimetallic nanostructures due to their unique characteristics of atomic-level homogeneous mixing of constituent elements in the nanoconfinements. Here, the successful creation of NiCoCr nanoparticles, a well-known MPEA system is reported, using ultrafast nanosecond laser-induced dewetting of alloy thin films. Nanoparticle formation occurs by spontaneously breaking the energetically unstable thin films in a melt state under laser-induced hydrodynamic instability and subsequently accumulating in a droplet shape via surface energy minimization. While NiCoCr alloy shows a stark contrast in physical properties compared to individual metallic constituents, i.e., Ni, Co, and Cr, yet the transient nature of the laser-driven process facilitates a homogeneous distribution of the constituents (Ni, Co, and Cr) in the nanoparticles. Using high-resolution chemical analysis and scanning nanodiffraction, the environmental stability and grain arrangement in the nanoparticles are further investigated. Thermal transport simulations reveal that the ultrashort (≈100 ns) melt-state lifetime of NiCoCr during the dewetting event helps retain the constituent elements in a single-phase solid solution with homogenous distribution and opens the pathway to create the unique MPEA nanoparticles with laser-induced dewetting process.
RESUMO
Alloying multiple immiscible elements into a nanoparticle with single-phase solid solution structure (high-entropy-alloy nanoparticles, HEA-NPs) merits great potential. To date, various kinds of synthesis techniques of HEA-NPs are developed; however, a continuous-flow synthesis of freestanding HEA-NPs remains a challenge. Here a micron-droplet-confined strategy by flame spray pyrolysis (FSP) to achieve the continuous-flow synthesis of freestanding HEA-NPs, is proposed. The continuous precursor solution undergoes gas shearing and micro-explosion to form nano droplets which act as the micron-droplet-confined reactors. The ultrafast evolution (<5 ms) from droplets to <10 nm nanoparticles of binary to septenary alloys is achieved through thermodynamic and kinetic control (high temperature and ultrafast colling). Among them, the AuPtPdRuIr HEA-NPs exhibit excellent electrocatalytic performance for alkaline hydrogen evolution reaction with 23 mV overpotential to achieve 10 mA cm-2, which is twofold better than that of the commercial Pt/C. It is anticipated that the continuous-flow synthesis by FSP can introduce a new way for the continuous synthesis of freestanding HEA-NP with a high productivity rate.
RESUMO
The defeat of cancer is still a challenge due to the existence of cancer stem cells (CSCs) because they resist conventional chemotherapy via multifactor regulated mechanisms. Consequently, one-dimensional action toward CSCs cannot work. Herein, we used rationally designed hybrid nanoparticles as a combined cancer therapy, hoping to form a multidimensional control network. In this paper, gold/silver alloy nanoparticle decorated camptothecin nanocrystals were formulated according to complementary anti-CSC mechanisms from gold, silver, and organic drug. This smart drug formulation could combine chemotherapy and thermotherapy, target different tumor sites, and demonstrate versatile toxicity profiles from each component. Major results indicated that this nanosystem demonstrated indiscriminately effective cytotoxic/proapoptotic/necrotic activity against bulk MCF-7 cells and their CSC subpopulation, in particular under laser ablation. Moreover, this nanosystem displayed enhanced antineoplastic activity against CSC spheroids, resulting in a significant reduction in their number and size, that is, their self-renewal capacity. All the results indicated that CSCs upon treatment of these new hybrid nanoparticles underwent reduced stemness and conversion from the original quiescent state and recovered their sensitivity toward chemotherapy. The relevant anticancer mechanism was ascribed to NIR-pH dual responsive drug release, synergistic/combined thermo-chemotherapy of organic drug and inorganic alloy nanoparticles, enhanced cellular uptake mediated by alloy nanoparticles, and Ag+-induced biomembrane damage. This thermo-chemotherapy platform provides a new combinatorial strategy for inorganic and organic agents in the complete elimination of CSCs.
Assuntos
Antineoplásicos , Nanopartículas , Neoplasias , Humanos , Camptotecina/farmacologia , Prata , Ouro/química , Antineoplásicos/farmacologia , Nanopartículas/química , Células-Tronco Neoplásicas , Ligas/farmacologia , Linhagem Celular Tumoral , Neoplasias/patologiaRESUMO
A novel nitrogen-doped ordered mesoporous carbon (OMC) pore-embedded growth Pt-Ru-Fe nanoparticles (Pt1-Ru7.5-Fex@N-OMCs) composite was designed and synthesized for the first time. SBA-15 was used as a template, and dopamine was used as a carbon and nitrogen source and metal linking reagent. The oxidative self-polymerization reaction of dopamine was utilized to polymerize dopamine into two-dimensional ordered SBA-15 template pores. Iron porphyrin was introduced as an iron source at the same time as polymerization of dopamine, which was introduced inside and outside the pores using dopamine-metal linkage. Carbonization of polydopamine, nitrogen doping and iron nanoparticle formation were achieved by one-step calcination. Then the templates were etched to form Fex@N-OMCs, and finally the Pt1-Ru7.5-Fex@N-OMCs composites were stabilized by the successful introduction of platinum-ruthenium nanoparticles through the substitution reaction. The composite uniformly embeds the transition metal nanoparticles inside the OMC pores with high specific surface area, which limits the size of the metal nanoparticles inside the pores. At the same time, the metal nanoparticles are also loaded onto the surface of the OMCs, realizing the uniform loading of metal nanoparticles both inside and outside the pores. This enhances the active sites of the composite, promotes the mass transfer process inside and outside the pores, and greatly enhances the electrocatalytic performance of the catalyst. The material shows high electrocatalytic performance for adrenaline, which is characterized by a wide linear range, high sensitivity and low detection limit, and can realize the detection of actual samples.
RESUMO
Ammonia borane (AB) with 19.6â wt % H2 content is widely considered a safe and efficient medium for H2 storage and release. Co-based nanocatalysts present strong contenders for replacing precious metal-based catalysts in AB hydrolysis due to their high activity and cost-effectiveness. However, precisely adjusting the active centers and surface properties of Co-based nanomaterials to enhance their activity, as well as suppressing the migration and loss of metal atoms to improve their stability, presents many challenges. In this study, mesoporous-silica-confined bimetallic Co-Cu nanoparticles embedded in nitrogen-doped carbon (CoxCu1-x@NC@mSiO2) were synthesized using a facile mSiO2-confined thermal pyrolysis strategy. The obtained product, an optimized Co0.8Cu0.2@NC@mSiO2 catalyst, exhibits enhanced performance with a turnover frequency of 240.9â molH2 â molmetal â min-1 for AB hydrolysis at 298â K, surpassing most noble-metal-free catalysts. Moreover, Co0.8Cu0.2@NC@mSiO2 demonstrates magnetic recyclability and extraordinary stability, with a negligible decline of only 0.8 % over 30â cycles of use. This enhanced performance was attributed to the synergistic effect between Co and Cu, as well as silica confinement. This work proposes a promising method for constructing noble-metal-free catalysts for AB hydrolysis.
RESUMO
Metal-organic frameworks (MOFs) have emerged as attractive candidates in cancer theranostics due to their ability to envelop magnetic nanoparticles, resulting in reduced cytotoxicity and high porosity, enabling chemodrug encapsulation. Here, FeAu alloy nanoparticles (FeAu NPs) are synthesized and coated with MIL-100(Fe) MOFs to fabricate FeAu@MOF nanostructures. We encapsulated Doxorubicin within the nanostructures and evaluated the suitability of this platform for medical imaging and cancer theranostics. FeAu@MOF nanostructures (FeAu@MIL-100(Fe)) exhibited superparamagnetism, magnetic hyperthermia behavior and displayed DOX encapsulation and release efficiency of 69.95 % and 97.19 %, respectively, when stimulated with alternating magnetic field (AMF). In-vitro experiments showed that AMF-induced hyperthermia resulted in 90 % HSC-3 oral squamous carcinoma cell death, indicating application in cancer theranostics. Finally, in an in-vivo mouse model, FeAu@MOF nanostructures improved image contrast, reduced tumor volume by 30-fold and tumor weight by 10-fold, which translated to enhancement in cumulative survival, highlighting the prospect of this platform for oral cancer treatment.
Assuntos
Carcinoma , Hipertermia Induzida , Estruturas Metalorgânicas , Neoplasias Bucais , Nanoestruturas , Animais , Camundongos , Estruturas Metalorgânicas/química , Medicina de Precisão , Doxorrubicina/farmacologia , Doxorrubicina/uso terapêutico , Doxorrubicina/química , Neoplasias Bucais/diagnóstico por imagem , Neoplasias Bucais/tratamento farmacológico , Diagnóstico por Imagem , Fenômenos Magnéticos , Nanomedicina TeranósticaRESUMO
Nitric oxide (NO), as a vital signaling molecule related to different physiological and pathological processes in living systems, is closely associated with cancer and cardiovascular disease. However, the detection of NO in real-time remains a difficulty. Here, PtBi alloy nanoparticles (NPs) were synthesized, dealloyed, and then fabricated to NP-based electrodes for the electrochemical detection of NO. Transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS), and nitrogen physical adsorption/desorption show that dealloyed PtBi alloy nanoparticles (dPtBi NPs) have a porous nanostructure. Electrochemical impedance spectroscopy and cyclic voltammetry results exhibit that the dPtBi NP electrode possesses unique electrocatalytic features such as low charge transfer resistance and large electrochemically active surface area, which lead to its excellent NO electrochemical sensing performance. Owing to the higher density of catalytical active sites formed PtBi bimetallic interface, the dPtBi NP electrode displays superior electrocatalytic activity toward the oxidation of NO with a peak potential at 0.74 V vs. SCE. The dPtBi NP electrode shows a wide dynamic range (0.09-31.5 µM) and a low detection limit of 1 nM (3σ/k) as well as high sensitivity (130 and 36.5 µA µM-1 cm-2). Moreover, the developed dPtBi NP-based electrochemical sensor also exhibited good reproducibility (RSD 5.7%) and repeatability (RSD 3.4%). The electrochemical sensor was successfully used for the sensitive detection of NO produced by live cells. This study indicates a highly effective approach for regulating the composition and nanostructures of metal alloy nanomaterials, which might provide new technical insights for developing high-performance NO-sensitive systems, and have important implications in enabling real-time detection of NO produced by live cells.
Assuntos
Nanopartículas , Óxido Nítrico , Reprodutibilidade dos Testes , Espalhamento a Baixo Ângulo , Difração de Raios X , LigasRESUMO
For practical analysis and simultaneous detection of arbutin (AR) and hydrochinone (HQ) in cosmetics, an electrochemical sensor has been designed based on nitrogen and sulfur co-doped Fe-Ni alloy (N,S-FeNi3/C) nanoparticles. The N,S-FeNi3/C has been prepared for the first time via hydrothermal synthesis and high-temperature carbonization. N,S-FeNi3/C not only improves the charge transfer to the surface, but also provides rich active sites and fast ion diffusion rates owing to the iron and nickel bimetallic materials. In addition, the d-band structure of transition metals (nickel and iron) introduced by the N and S atoms exhibits an electronic structure similar to that of noble metal catalysts, thus enhancing electrocatalytic activity and increasing conductivity. Additionally, the double doping of S and N atoms significantly increases the active sites of carbon atoms; thus, N-S-FeNi3/C exhibits excellent electrochemical catalytic activity for the oxidation of AR and HQ. Further, the N,S-FeNi3/C sensor is used for the simultaneous determination of HQ and AR by square-wave pulse voltammetry. Distinct oxidation peaks of HQ and AR are observed at potentials of +0.028 V and +0.352 V (vs. SCE). The electrical signal increases linearly in the HQ concentration ranges of 0.1-100 µM and 0.05-70 µM for the simultaneous determination of AR and HQ with a detection limit as low as 0.0476 and 0.0135 µM (S/N = 3), respectively. Thus, rapid and accurate detection of AR and HQ in spiked cosmetics is successfully achieved, with a recovery ranging from 96.4 to 104.2%, and the relative standard deviation is lower than 3.8-4.0%.
RESUMO
To control a nanoparticle's chemical composition and thus function, researchers require readily accessible and economical characterization methods that provide quantitative in situ analysis of individual nanoparticles with high throughput. Here, we established dual analyte single-particle inductively coupled plasma quadrupole mass spectrometry to quantify the chemical composition and reaction kinetics of individual colloidal nanoparticles. We determined the individual bimetallic nanoparticle mass and chemical composition changes during two different chemical reactions: (i) nanoparticle etching and (ii) element deposition on nanoparticles at a rate of 300+ nanoparticles/min. Our results revealed the heterogeneity of chemical reactions at the single nanoparticle level. This proof-of-concept study serves as a framework to quantitatively understand the dynamic changes of physicochemical properties that individual nanoparticles undergo during chemical reactions using a commonly available mass spectrometer. Such methods will broadly empower and inform the synthesis and development of safer, more effective, and more efficient nanotechnologies that use nanoparticles with defined functions.
Assuntos
Nanopartículas , Cinética , Espectrometria de Massas/métodos , Análise EspectralRESUMO
Multimetallic alloy nanoparticles (NPs) have received considerable attention in various applications due to their compositional variability and exceptional properties. However, the complexity of both the general synthesis and structure-activity relationships remain the long-standing challenges in this field. Herein, we report a versatile 2D MOF-assisted pyrolysis-displacement-alloying route to successfully synthesize a series of binary, ternary and even high-entropy NPs that are uniformly dispersed on porous nitrogen-doped carbon nanosheets (PNC NSs). As a proof of utility, the obtained Co0.2 Ru0.7 Pt0.1 /PNC NSs exhibits apparent hydrogen oxidation activity and durability with a record-high mass specific kinetic current of 1.84â A mg-1 at the overpotential of 50â mV, which is approximately 11.5â times higher than that of the Pt benchmark. Both experimental and theoretical studies reveal that the addition of Pt engenders a phase transition in CoRu alloys from hexagonal close-packed (hcp) to face-centered cubic (fcc) structure. The elevated reactivity of the resulted ternary alloy can be attributed to the optimized adsorption of hydrogen intermediate and the decreased reaction barrier for water formation. This study opens a new avenue for the development of highly efficient alloy NPs with various compositions and functions.
RESUMO
Platinum (Pt), as a commonly used electrocatalyst in direct methanol fuel cells (DMFCs), suffers from sluggish kinetics of both the methanol oxidation reaction (MOR) and oxygen reduction reaction (ORR). Geometric engineering has been proven effective for improving the MOR and ORR activities. Thus, by modulating the Pt precursor and poly(vinylpyrrolidone) (PVP) dosages, different porous PtCu nanotubes constructed by hollow nanospheres, solid alloy, and Pt-rich skinned nanoparticles, respectively, are successfully synthesized. Among them, the solid PtCu alloy nanoparticle coherent nanotubes exhibit the specific activity 9.42 times higher than Pt/C toward MOR, while the hollow PtCu alloy nanosphere coherent nanotubes show the specific activity 4.85 times higher than Pt/C toward ORR. The different Pt:Cu ratios of hollow nanospheres, solid alloy, and Pt-rich skinned nanoparticles cause the differences in electron transfer from Cu to Pt as well as electronic structures of Pt. As a result, the binding energies of intermediates can be regulated, leading to the enhancement in MOR and ORR.
Assuntos
Metanol , Nanotubos , Ligas/química , Catálise , Metanol/química , Nanotubos/química , Oxirredução , Oxigênio/química , Platina/química , PorosidadeRESUMO
Chemoselectively oxidizing Cα -OH to C=O has been considered as a key step for the oxidative depolymerization of lignin. In this work, we design and prepare a series of composites of RuCo alloy nanoparticles and reduced graphene oxide (RuCo/rGO) with different Ru to Co ratios and explore their catalytic activities in the oxidation of veratryl alcohol derivatives, which usually serve as the model compounds for studying lignin oxidation. It is illustrated that the Ru to Co ratio determines the morphology and average size of the RuCo alloy nanoparticles on rGO, and the overall catalytic activities of the composites. The RuCo alloy nanoparticles on rGO with Ru to Co ratios of 1 : 0 to 1.2 : 1 show a unique flower-shaped morphology that increases the exposure of the active sites and thus promotes their contact with the substrates. The RuCo/rGO composites exhibit high catalytic activities for the oxidation of Cα -OH to aldehydes at 100 °C for 2â h. Additionally, the Co component affords the RuCo/rGO composites with magnetic properties that make the separation and recovery of the catalyst simple. Given the high catalytic performances and easy recovery, the RuCo/rGO composites would be potentially useful for the depolymerization of lignin.
Assuntos
Grafite , Álcoois Benzílicos , Catálise , Grafite/química , OxirreduçãoRESUMO
Despite the traditional plasmonic materials are counted on one hand, there are a lot of possible combinations leading to alloys with other elements of the periodic table, in particular those renowned for magnetic or catalytic properties. It is not a surprise, therefore, that nanoalloys are considered for their ability to open new perspectives in the panorama of plasmonics, representing a leading research sector nowadays. This is demonstrated by a long list of studies describing multiple applications of nanoalloys in photonics, photocatalysis, sensing and magneto-optics, where plasmons are combined with other physical and chemical phenomena. In some remarkable cases, the amplification of the conventional properties and even new effects emerged. However, this field is still in its infancy and several challenges must be overcome, starting with the synthesis (control of composition, crystalline order, size, processability, achievement of metastable phases and disordered compounds) as well as the modelling of the structure and properties (accuracy of results, reliability of structural predictions, description of disordered phases, evolution over time) of nanoalloys. To foster the research on plasmonic nanoalloys, here we provide an overview of the most recent results and developments in the field, organized according to synthetic strategies, modelling approaches, dominant properties and reported applications. Considering the several plasmonic nanoalloys under development as well as the large number of those still awaiting synthesis, modelling, properties assessment and technological exploitation, we expect a great impact on the forthcoming solutions for sustainability, ultrasensitive and accurate detection, information processing and many other fields.
Assuntos
Ligas , Nanopartículas , Ligas/química , Reprodutibilidade dos Testes , Nanopartículas/química , MagnetismoRESUMO
An ultrasensitive multiplex surface-enhanced Raman scattering (SERS) immunoassay was developed using porous Au-Ag alloy nanoparticles (p-AuAg NPs) as Raman signal amplification probe coupling with encoded photonic crystal microsphere. p-AuAg NPs were synthesized and modified with the second antibody (Ab2) and Raman tag (mercaptobenzoic acid, MBA) to prepare a Raman signal-amplified probe. The high porosity of the p-AuAg NPs enables significant coupling of the localized surface plasmon resonance and thus abundant inherent hotspots for Raman signal enhancement. 3D-ordered silver nanoparticles-coated silica photonic crystal beads (Ag/SPCBs) were prepared as encoded SERS substrate for multiplex detection using their reflection peaks. The signal-amplified probe was used for multiplex detection of tumor markers carcinoembryonic antigen (CEA) and alpha fetoprotein (AFP). The wide linear ranges of 10-7-103 ng/mL for CEA and 10-4-103 ng/mL for AFP with detection limits of 1.22 × 10-8 ng/mL and 2.47 × 10-5 ng/mL for CEA and AFP at a signal-to-noise ratio of 3 were obtained. The proposed multiplex SERS immunoassay method displays ultrahigh sensitivity, wide linear range, and excellent specificity, which can be successfully applied to measure clinical serum samples with satisfactory results. The research provides a novel SERS signal enhancement strategy for the multiplex bioassay.
Assuntos
Ligas , Nanopartículas Metálicas , PrataRESUMO
Strain is known to enhance the activity of the oxygen reduction reaction in catalytic platinum alloy nanoparticles, whose inactivity is the primary impediment to efficient fuel cells and metal-air batteries. Bragg coherent diffraction imaging (BCDI) was employed to reveal the strain evolution during the voltammetric cycling in Pt-Ni alloy nanoparticles composed of Pt2Ni3, Pt1Ni1, and Pt3Ni2. Analysis of the 3D strain images using a core-shell model shows that the strain as large as 5% is induced on Pt-rich shells due to Ni dissolution. The composition dependency of the strain on the shells is in excellent agreement with that of the catalytic activity. The present study demonstrates that BCDI enables quantitative determination of the strain on alloy nanoparticles during electrochemical reactions, which provides a means to exploit surface strain to design a wide range of electrocatalysts.
Assuntos
Ligas , Nanopartículas , Catálise , Oxirredução , PlatinaRESUMO
In this study, FeNi magnetic alloy nanoparticles (MANPs) were employed for the forensic analysis of four poisons-dimethametryn, napropamide, thiodicarb, and strychnine-using surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS). FeNi MANPs were prepared via coprecipitation using two reducing agents, sodium borohydride (NaBH4) and hydrazine monohydrate (N2H4·H2O), to optimize the prepared MANPs and investigate their effect on the performance of SALDI-MS analysis. Thereafter, SALDI-MS analysis was carried out for the detection of three pesticides and a rodenticide. The prepared substrate offered sensitive detection of the targeted analytes with LOD values of 1 ng/mL, 100 pg/mL, 10 ng/mL, and 200 ng/mL for dimethametryn, napropamide, thiodicarb, and strychnine, respectively. The relative standard deviation (%RSD) values were in the range of 2.30-13.97% for the pesticides and 15-23.81% for strychnine, demonstrating the good spot-to-spot reproducibility of the FeNi substrate. Finally, the MANPs were successfully employed in the analysis of poison-spiked blood serum using a minute quantity of the sample with an LOD of 700 ng/mL dimethametryn and napropamide, 800 ng/mL thiodicarb, and 500 ng/mL strychnine. This study has great potential regarding the analysis of several poisons that may be found in human serum, which is significant in cases of self-harm.
Assuntos
Nanopartículas , Praguicidas , Venenos , Ligas , Humanos , Fenômenos Magnéticos , Nanopartículas/química , Reprodutibilidade dos Testes , Soro , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz/métodos , EstricninaRESUMO
Recently, bimetallic nanoparticles (BMNPs) blending the properties of two metals in one nanostructured system have generated enormous interest due to their potential applications in various fields including biosensing, imaging, nanomedicine, and catalysis. BMNPs have been developed later with respect to the monometallic nanoparticles (MNPs) and their physicochemical and biological properties have not yet been comprehensively explored. The manuscript aims at collecting the main design criteria used to synthetize BMNPs focusing on green route synthesis. The influence of experimental parameters such as temperature, time, reagent concentrations, capping agents on the particle growth and colloidal stability are examined. Finally, an overview of their nanotechnological applications and biological profile are presented.
RESUMO
Nonequilibrium nanoalloys are metastable solids obtained at the nanoscale under nonequilibrium conditions that allow the study of kinetically frozen atoms and the discovery of new physical and chemical properties. However, the stabilization of metastable phases in the nanometric size regime is challenging and the synthetic route should be easy and sustainable, for the nonequilibrium nanoalloys to be practically available. Here we report on the one-step laser ablation synthesis in solution (LASiS) of nonequilibrium Au-Co alloy nanoparticles (NPs) and their characterization on ensembles and at the single nanoparticle level. The NPs are obtained as a polycrystalline solid solution stable in air and water, although surface cobalt atoms undergo oxidation to Co(II). Since gold is a renowned plasmonic material and metallic cobalt is ferromagnetic at room temperature, these properties are both found in the NPs. Besides, surface conjugation with thiolated molecules is possible and it was exploited to obtain colloidally stable solutions in water. Taking advantage of these features, an array of magnetic-plasmonic dots was obtained and used for surface-enhanced Raman scattering experiments. Overall, this study confirms that LASiS is an effective method for the formation of kinetically stable nonequilibrium nanoalloys and shows that Au-Co alloy NPs are appealing magnetically responsive plasmonic building blocks for several nanotechnological applications.
RESUMO
Dry reforming of methane (DRM) is a feasible solution to address the reduction of greenhouse gases stipulated by the Paris Climate Agreement, given that it adds value by converting trivial gases, CO2 and CH4 , simultaneously into useful syngas. However, the conventional Ni catalyst undergoes deactivation due to carbon coking and particle agglomeration. Here we demonstrate a highly efficient and durable DRM catalyst: exsolved Co-Ni-Fe ternary alloy nanoparticles on the layered perovskite PrBaMn1.7 Co0.1 Ni0.2 O5+δ produced by topotactic exsolution. This method readily allows the generation of a larger number of exsolved nanoparticles with enhanced catalytic activity above that of Ni monometallic and Co-Ni bimetallic particles. The enhancement is achieved by the upshift of the d-band center of Co-Ni-Fe relative to those of Co-Ni and Ni, meaning easier charge donation to the adsorbate. Furthermore, the exsolved catalyst shows exceptional stability, with continuous DRM operation for about 350â hours.