Stability between single and segmental maxillary osteotomies in bimaxillary surgery for cleft-associated class III deformity: a CBCT study.

OBJECTIVE: Segmental Le Fort I osteotomy through the cleft is a common strategy to narrow the alveolar cleft in adults. This study compared skeletal stability between single and segmental Le Fort I osteotomies in patients with unilateral cleft lip and palate (UCLP). MATERIALS AND METHODS: This retrospective analysis examined 45 adults with complete UCLP-associated class III deformities who underwent bimaxillary surgery with either single (n = 30) or segmental (n = 15) Le Fort I advancement. Cone beam computed tomography (CBCT) scans of the facial skeleton were acquired before surgery, 1-week postsurgery, and at follow-up. Measures of landmarks from the CBCT images for the two treatment groups were compared for translation (left/right, posterior/anterior, superior/inferior) and rotation (yaw, roll, pitch). RESULTS: Postsurgery, the downward movement of the maxilla was larger in the segmental group than the single group. At follow-up, the maxilla moved backward in both groups, and upward in the segmental group. The mandible moved forward and upward and rotated upward in both groups. The amount of upward movement and rotation was larger in the segmental group than the single group. CONCLUSIONS: Two years after bimaxillary surgery in patients with UCLP-associated class III deformity, greater relapse was found after segmental Le Fort I osteotomies in vertical translation of the maxilla and mandible, and pitch rotation of the mandible compared with single Le Fort I osteotomies. CLINICAL RELEVANCE: The vertical relapse of the maxilla was larger after segmental Le Fort I advancement compared with single Le Fort I advancement in clefts.

Analysis of the Complications of Mandibular Cortical Bone with/without Particulate Artificial Bone Graft for Alveolar Cleft Reconstruction: A Retrospective Study.

OBJECTIVES: To investigate postoperative complications in patients who underwent alveolar bone graft surgery using mandibular cortical bone (MCB) with/without particulate artificial bone (PAB). DESIGN: Retrospective study. SETTING: Department of Oral and Cranio-Maxillofacial Surgery in the hospital from August 2020 to August 2023. PATIENTS: Patients who underwent alveolar bone graft using MCB were reviewed. They were diagnosed with unilateral or bilateral alveolar cleft, and some of them developed postoperative complications after MCB with/without PAB repair surgery. INTERVENTIONS: No interventions. MAIN OUTCOME MEASURE(S): Complications. RESULTS: Complications occurred in 12 of 149 patients who underwent surgery (8.05%). Among these evaluated patients, 10 had surgical site infection, 8 had mucosal dehiscence, 2 had discharge of resorbable plate debris, and 6 had grafted bone necrosis. Patients with bilateral alveolar clefts were more likely to experience complications (P = 0.033). CONCLUSION: MCB with/without PAB grafting is effective enough for patients to undergo reconstruction of the alveolar process.

Evaluation of the Regenerative Capacity of Demineralized Bone Matrix vs Fat Graft in Alveolar Cleft Model in Albino Rats.

AIM: This study was performed to evaluate the regenerative capacity of demineralized bone matrix vs fat graft, both guided by pericardium membrane in alveolar cleft model in albino rats. MATERIALS AND METHODS: A total of 72 rats were required in this study. A surgical bone defect with a 7 mm length × 4 mm width × 3 mm depth was created as a model of an alveolar cleft, then the rats were divided randomly into four equal groups each group contained 18 rats: control group (defect only), the membrane group (the defect was covered by the pericardium membrane), the demineralized bone matrix (DBM) group (the defect was filled with DBM guided by pericardium membrane) and fat group (the defect was filled with a fat graft guided by the pericardium membrane). Around 6 rats from each group were euthanized after 2, 4, and 8 weeks. Skulls were scanned with cone beam computed tomography (CBCT) and harvested for histological evaluation with routine H&E immunohistochemical stains (Anti-osteocalcin and Anti-Wnt5a). The data was recorded and statistically analyzed by a two-way ANOVA. RESULTS: The study showed a notable formation of new bone, and expression of OCN and Wnt5a were notably increased by time in the fat group. However, the density of bone grafts and OCN and Wnt5a expression decreased with time in the DBM group. Control and membrane groups showed negative OCN and Wnt5a immune-reactivity in the cleft site. CONCLUSION: Fat graft results were superior to DBM results with regard to mucosal closure and accelerated bone regeneration, and may represent an effective treatment for alveolar cleft reconstruction. CLINICAL SIGNIFICANCE: Finding an inexpensive, accessible, biocompatible and easily manipulated treatment for craniofacial reconstruction and fat graft fulfilled the desired aims. Further investigations with prolonged evaluation periods are needed. How to cite this article: Abdel Raouf E, Elsherbini AM, Abdel Salam Yousef Y, et al. Evaluation of the Regenerative Capacity of Demineralized Bone Matrix vs Fat Graft in Alveolar Cleft Model in Albino Rats. J Contemp Dent Pract 2024;25(6):554-562.

Secondary alveolar cleft grafting using autogenous mineralized plasmatic matrix (MPM) versus cancellous bone particles derived from anterior iliac crest.

OBJECTIVE: The essential concern of alveolar cleft grafting in patients of cleft lip and palate at the mixed dentition phase is to gain bone within the cleft area that provides closure of the oronasal communication with continuous and stable maxilla for future cleft teeth eruption or implantation. This study aimed to compare the effectiveness of mineralized plasmatic matrix (MPM) versus cancellous bone particles harvested from anterior iliac crest in secondary alveolar cleft grafting. PATIENTS AND METHODS: This prospective randomized controlled trial was conducted on ten patients with unilateral complete alveolar cleft requiring cleft reconstruction. Patients were randomly divided into two equal groups; group (1) included 5 patients who received particulate cancellous bone derived from anterior iliac crest (control group) and group (2) included 5 patients who received MPM graft prepared from cancellous bone derived from anterior iliac crest (study group). All patients received CBCT preoperatively, immediately postoperatively and after 6 months. On the CBCT, graft's volume, labio-palatal width, and height were measured and compared. RESULTS: The outcome of the studied patients 6 months postoperatively showed that the control group had significant decrease in the graft volume, labio-palatal width, and height compared to the study group. CONCLUSION: MPM allowed for the integration of bone graft particles inside a fibrin network, which offers positional stability of the bone particles, thus preserving their shape with subsequent "in situ" immobilization of the graft components. This conclusion was reflected positively in terms of maintained graft volume, width, and height compared to that of the control group. CLINICAL RELEVANCE: MPM allowed for maintenance of grafted ridge volume, width, and height.

Outcomes of alveolar cleft repair in complete cleft lip and palate after tertiary gingivoperiosteoplasty and segmental Le Fort I osteotomy.

OBJECTIVES: Gingivoperiosteoplasty is often used for reconstruction of alveolar defects in infants with cleft lip and palate. This study aimed to examine outcomes of tertiary gingivoperiosteoplasty, which has not previously been investigated. MATERIALS AND METHODS: This prospective study included 11 adults with complete cleft lip and palate (n = 12 sites) who consecutively underwent segmental Le Fort I osteotomy and concomitant gingivoperiosteoplasty for correction of skeletal class III deformity, nasoalveolar fistula and alveolar cleft. Outcomes included clinical and radiographic evaluations of gingivoperiosteoplasty at the time of osteotomy (presence of nasoalveolar fistula, residual cleft defect and unsupported root ratio of cleft-adjacent teeth), and determination of influencing factors for the clinical success of alveolar cleft repair. Study variables included age, gender, pre-surgical orthodontic treatment and alveolar cleft width of cleft-adjacent canine and angulation between cleft-adjacent teeth before surgery and 1-week postsurgery. RESULTS: Posttreatment, no nasoalveolar fistula remained. The residual cleft defect decreased significantly (p < 0.01). The unsupported root ratio of cleft-adjacent teeth did not differ (p > 0.05); eight cleft sites reached Bergland I or II (67% success). One-week postsurgery, the minimal alveolar cleft width of cleft-adjacent canine was significantly less in the success group compared with the failed group (p = 0.01). CONCLUSIONS: Tertiary gingivoperiosteoplasty and segmental Le Fort I osteotomy decreased nasoalveolar fistulas and induced alveolar bone formation. The minimal alveolar cleft width immediately after surgery was the major influencing factor of clinical success. CLINICAL RELEVANCE: Segmental Le Fort I osteotomy with simultaneous gingivoperiosteoplasty efficaciously repairs adult alveolar clefts.

3-Dimensional Craniofacial Imaging: A Template for Systematic Radiologic Evaluation for Alveolar Cleft Assessment and Planning.

BACKGROUND: Imaging findings are central to the diagnosis and treatment planning decisions when managing craniofacial differences. However, limited information is published on protocols for systematic cleft imaging assessment and for effective communication of these findings. SOLUTION: A template is presented to help guide radiologic imaging reports to acquire the relevant clinical information needed to manage patients with alveolar cleft.

Comparison of Preoperative Measurement Methods of Alveolar Cleft Volume Using Cone Beam Computed Tomography between Computer Simulation and Water Displacement Methods.

OBJECTIVE: To compare the use of a computer simulation by Mimics software and the water displacement method as means for measurement of alveolar cleft volume on cone beam computed tomography (CBCT) data. DESIGN: Prospective study. SETTLING: Institutional research. PATIENTS: Patients with unilateral complete cleft lip and palate (UCCLP) who would undergo alveolar bone grafting. INTERVENTIONS: CBCT images of twenty patients with UCCLP were included in the study. In the first method, the water displacement method was adopted to measure volume of plasticine filled in the alveolar cleft imprinted on 3D printed model of maxilla. In the second method a volumetric assessment function in Mimics software was adopted to measure volume of 3D virtual model of alveolar cleft constructed from CBCT images. A comparison on the alveolar cleft volumes derived from the two methods was assessed using the statistical paired t-test. MAIN OUTCOME MEASURE: The paired-t test showed no statistically significant difference between alveolar cleft volumes measured by the two methods (P = 0.075). RESULTS: Mean volume of the alveolar cleft measured by the water displacement method was 1.03 ± 0.31 ml whereas by the computer simulation using Mimics software the value was 1.00 ± 0.31 ml. The mean difference between the two methods was 0.03 ± 0.08 ml. CONCLUSION: The computer simulation by Mimics software as a means for measurement of alveolar cleft volume on CBCT data is as accurate as the measurement by the water displacement method.

A Novel and Practical Protocol for Three-Dimensional Assessment of Alveolar Cleft Grafting Procedures.

OBJECTIVE: To evaluate the reproducibility and accuracy of a new, easy-to-use volumetric assessment of the alveolar cleft. DESIGN: Twelve cone-beam computed tomography (CBCT) datasets of patients with a unilateral cleft lip, alveolus, and palate were evaluated by two investigators. Residual alveolar cleft calcified volume one year after surgery was analyzed by using standardized landmarks to determine the borders of the cleft defect and semi-automatically segment the alveolar cleft defect. RESULTS: The Dice-coefficient between observers for the segmented preoperative alveolar cleft defect was 0.81. Average percentage of residual alveolar cleft calcified material was 66.7% one year postoperatively. CONCLUSIONS: This study demonstrates a reliable and practical semi-automatic three-dimensional volumetric assessment method for unilateral clefts using CBCT.

Postoperative Daycare as a Safe and Cost-Effective Option for Secondary Alveolar Bone Graft (SABG) Surgery: A Retrospective Comparative Cohort Study.

OBJECTIVE: To evaluate the outcomes of Secondary Alveolar Bone Grafting (SABG) in patients treated either in daycare or with multiple day hospitalization (MDH) in relation to costs and complication rates. DESIGN: Retrospective comparative cohort study. SETTING: The data was collected from two settings: Postoperative daycare or MDH after oral cleft surgery in an Academic Medical Center in The Netherlands. PATIENTS: Data of 137 patients with unilateral Cleft lip, alveolus, and palate (CLAP) treated between 2006-2018 were evaluated. Registered clinical variables: age, gender, cleft subtype, bone donor site, type of hospitalization, length of stay, additional surgery, complications, surgeons, and costs. INTERVENTIONS: Closure of the alveolar cleft with/without closure of the anterior palate. MAIN OUTCOME MEASURES: Univariate analyses. RESULTS: Of the 137 patients, 46.7% were treated in MDH, and 53.3% in daycare. Total costs for daycare were significantly lower (P < .001). All patients treated in daycare received mandibular symphysis bone, whereas in MDH, 46.9% received iliac crest bone instead. Bone donor site was associated with postoperative care type. Complication rates were slightly but not significantly higher in daycare (26%) vs. MDH (14.1%) (P = .09). Most were Grade I (minor) according to Clavien Dindo classification. CONCLUSIONS: Daycare after alveolar cleft surgery is about as safe as MDH, but significantly cheaper.

Stem Cell-Based Tissue Engineering for Cleft Defects: Systematic Review and Meta-Analysis.

This study aimed to analyze the efficacy of stem cell-based tissue engineering for the treatment of alveolar cleft (AC) and cleft palate (CP) defects in animal models.Systematic review and meta-analysis.Preclinical studies on alveolar cleft repair in maxillofacial practice.Electronic search was performed using PubMed, Embase, and Cochrane databases. Pre-clinical studies, where stem cell-based tissue engineering was used in the reconstruction of AC and CP in animal models were included. Quality of the selected articles was evaluated using SYRCLE (SYstematic Review Centre for Laboratory animal Experimentation).Review of alveolar cleft bone augmentation interventions in preclinical models.Outcome parameters registered were new bone formation (NBF) and/or bone mineral density (BMD).Thirteen large and twelve small animal studies on AC (21) and CP (4) reconstructions were included. Studies had an unclear-to-high risk of bias. Bone marrow mesenchymal stem cells were the most widely used cell source. Meta-analyses for AC indicated non-significant benefits in favor of: (1) scaffold + cells over scaffold-only (NBF P = .13); and (2) scaffold + cells over empty control (NBF P = .66; BMD P = .31). Interestingly, dog studies using regenerative grafts showed similar to superior bone formation compared to autografts. Meta analysis for the CP group was not possible.AC and CP reconstructions are enhanced by addition of osteogenic cells to biomaterials. Directions and estimates of treatment effect are useful to predict therapeutic efficacy and guide future clinical trials of bone tissue engineering.