Expanding the toolbox for predictive parameters describing antibody stability considering thermodynamic and kinetic determinants.

PURPOSE: Introduction of the activation energy (Ea) as a kinetic parameter to describe and discriminate monoclonal antibody (mAb) stability. METHODS: Ea is derived from intrinsic fluorescence (IF) unfolding thermograms. An apparent irreversible three-state fit model based on the Arrhenius integral is developed to determine Ea of respective unfolding transitions. These activation energies are compared to the thermodynamic parameter of van´t Hoff enthalpies (∆Hvh). Using a set of 34 mAbs formulated in four different formulations, both the apparent thermodynamic and kinetic parameters together with apparent melting temperatures are correlated collectively with each other to storage stabilities to evaluate its predictive power with respect to long-term effects potentially reflected in shelf-life. RESULTS: Ea allows for the discrimination of (i) different parent mAbs, (ii) different variants that originate from parent mAbs, and (iii) different formulations. Interestingly, we observed that the Ea of the CH2 unfolding transition shows strongest correlations with monomer and aggregate content after storage at accelerated and stress conditions when collectively compared to ∆Hvh and Tm of the CH2 transition. Moreover, the predictive parameters determined for the CH2 domain show generally stronger correlations with monomer and aggregate content than those derived for the Fab. Qualitative assessment by ranking Ea of the Fab domain showed good agreement with monomer content in storage stabilities of individual mAb sub-sets. CONCLUSION: Ea from IF unfolding transitions can be used in addition to other commonly used thermodynamic predictive parameters to discriminate and characterize thermal stability of different mAbs in different formulations. Hence, it shows great potential for antibody engineering and formulation scientists.

A methodological approach for the thermal stability and stress exposure studies of a model antibody.

The anti-horseradish peroxidase (HRP) antibody is conventionally used in immunohistochemistry. More recently, it has been used as the key element in a gold standard method to evaluate the functionality of antibody-based materials. However, few information are available about its melting temperature and its stability after exposition to laboratory stress conditions including freeze-drying and freeze-thawing cycles. The aim of this study was to evaluate the effects of these environmental constraints on the anti-HRP antibody in order to further use it as a reference in quality control and in the development of new antibody-based materials. In the developed method, the anti-HRP antibody is covalently immobilized onto a solid surface. After the direct recognition of its antigen HRP, the signal is proportional to the number of antibody active binding sites. The method was successfully utilized to accurately evaluate the anti-HRP antibody melting temperature (Tm was 73.5 ±â€¯0.2 °C). The method is a rapid and reliable tool with minimal cost for studying the anti-HRP antibody stability to solvent stress, freeze-thawing cycles, and freeze-drying process. The obtained information may be useful for routine analysis or in the development of antibody-based materials. This can be also proposed as an easy way to control antibody freeze-drying process.

Aggregate Formation and Antibody Stability in Infusion Bags: The Impact of Manual and Robotic Compounding of Monoclonal Antibodies.

Monoclonal antibodies (mAbs) can be damaged during the aseptic compounding process, with aggregation being the most prevalent form of degradation. Protein aggregates represent one of several risk factors for undesired immunogenicity of mAbs, which can potentially lead to severe adverse drug reactions and less effective treatments. Since data on aggregate and particle formation by robotic compounding is missing, we aimed to compare the antibody stability between robotic- and manual compounding of mAbs with regard to formation of (sub)visible aggregates. Infliximab and trastuzumab were compounded into infusion bags with the APOTECAchemo robot or manually by nurses or pharmacy technicians. The products were analyzed by quantifying (sub)visible particles with nanoparticle tracking analysis, dynamic light scattering (DLS), light obscuration, micro-flow imaging, high pressure size exclusion chromatography (HP-SEC), and visual inspection. HP-SEC showed high percentages monomers in trastuzumab (99.4 % and 99.4 %) and infliximab (99.5 % and 99.6 %) infusion bags for both manual and robotic compounding, respectively. DLS indicated more consistent and reproducible results with robotic compounding, and confirmed monodisperse samples with a higher polydispersity index for manual compounding (0.16, interquartile range; IQR 0.14-0.18) compared to robotic compounding (0.12, IQR 0.11-0.15). This study shows that the studied compounding methods had a minor impact on the number of aggregates and particles, and that robotic compounding of mAbs provided at least similar quality as manual compounding.

Investigating the Impact of Drone Transport on the Stability of Monoclonal Antibodies for Inter-Hospital Transportation.

In the field of healthcare logistics, the reliance on conventional transport methods such as cars for the delivery of monoclonal antibodies (mAbs) is susceptible to challenges posed by traffic and infrastructure, leading to increased and unpredictable transport times. Recognizing the potential role of drones in mitigating these challenges, we aimed to investigate the impact of medical drone transport on the stability of mAbs. Compromised stability could lead to aggregation and immunogenicity, thereby jeopardizing the efficacy and safety of mAbs. We studied the transportation of vials as well as ready-to-administer infusion bags with blinatumomab, tocilizumab, and daratumumab. The methodology involved the measurement of both temperature and mechanical shock during drone transport. Moreover, the analytical techniques High Performance Size-Exclusion Chromatography (HP-SEC), Dynamic Light Scattering (DLS), Light Obscuration (LO), Micro-Flow Imaging (MFI), and Nanoparticle Tracking Analysis (NTA) were employed to comprehensively assess the presence of aggregates and particle formation. The key findings revealed no significant differences between car and drone transport, indicating that the stability of mAbs in both vials and infusion bags was adequately maintained during drone transport. This suggests that medical drones are a viable and reliable means for the inter-hospital transport of mAbs, paving the way for more efficient and predictable logistics in healthcare delivery.

DeepSP: Deep learning-based spatial properties to predict monoclonal antibody stability.

Therapeutic antibody development faces challenges due to high viscosities and aggregation tendencies. The spatial charge map (SCM) and spatial aggregation propensity (SAP) are computational techniques that aid in predicting viscosity and aggregation, respectively. These methods rely on structural data derived from molecular dynamics (MD) simulations, which are computationally demanding. DeepSCM, a deep learning surrogate model based on sequence information to predict SCM, was recently developed to screen high-concentration antibody viscosity. This study further utilized a dataset of 20,530 antibody sequences to train a convolutional neural network deep learning surrogate model called Deep Spatial Properties (DeepSP). DeepSP directly predicts SAP and SCM scores in different domains of antibody variable regions based solely on their sequences without performing MD simulations. The linear correlation coefficient between DeepSP scores and MD-derived scores for 30 properties achieved values between 0.76 and 0.96 with an average of 0.87. DeepSP descriptors were employed as features to build machine learning models to predict the aggregation rate of 21 antibodies, and the performance is similar to the results obtained from the previous study using MD simulations. This result demonstrates that the DeepSP approach significantly reduces the computational time required compared to MD simulations. The DeepSP model enables the rapid generation of 30 structural properties that can also be used as features in other research to train machine learning models for predicting various antibody stability using sequences only. DeepSP is freely available as an online tool via https://deepspwebapp.onrender.com and the codes and parameters are freely available at https://github.com/Lailabcode/DeepSP.

Constant domain polymorphisms influence monoclonal antibody stability and dynamics.

The constant regions of clinical monoclonal antibodies are derived from a select number of allotypes found in IgG subclasses. Despite a long-term acknowledgment that this diversity may impact both antibody function and developability, there is a lack of data on the stability of variants carrying these mutations. Here, we generated a panel of IgG1, IgG2, and IgG3 antibodies with 32 unique constant region alleles and performed a systematic comparison of stability using red edge excitation shift (REES). This technique exploits the fluorescent properties of tryptophan residues to measure antibody structural dynamics which predict flexibility and the propensity to unfold. Our REES measurements revealed broad stability differences between subclasses with IgG3 possessing the poorest overall stability. Further interrogation of differences between variants within each subclass enabled the high-resolution profiling of individual allotype stabilities. Crucially, these observed differences were not found to be linked to N297-linked glycan heterogeneity. Our work demonstrates diverse stabilities (and dynamics) for a range of naturally occurring constant domain alleles and the utility of REES as a method for rapid and sensitive antibody stability profiling, requiring only laboratory spectrophotometry equipment.

Poloxamer 188 as surfactant in biological formulations - An alternative for polysorbate 20/80?

Surfactants are used to stabilize biologics. Particularly, polysorbates (Tween® 20 and Tween® 80) dominate the group of surfactants in protein and especially antibody drug products. Since decades drug developers rely on the ethoxylated sorbitan fatty acid ester mixtures to stabilize sensitive molecules such as proteins. Reasons are (i) excellent stabilizing properties, and (ii) well recognized safety and tolerability profile of these polysorbates in humans, especially for parenteral applications. However, over the past decade concerns regarding the stability of these two polysorbates were raised. The search of alternatives with preferably less reservations concerning degradation and product quality reducing issues leads, among others, to poloxamer 188 (e.g. Kolliphor® P188), a nonionic triblock-copolymer surfactant. This review sums up our current knowledge related to the characterization and physico-chemical properties of poloxamer 188, its analytics and stability properties for biological formulations. Furthermore, the advantages and disadvantages as a suitable polysorbate-alternative for the stabilization of biologics are discussed.

Seroprevalence of SARS-CoV-2 among potential convalescent plasma donors and analysis of their deferral pattern: Experience from tertiary care hospital in western India.

BACKGROUND AND OBJECTIVES: Seroprevalence estimation of COVID-19 is quite necessary for controlling the transmission of SARS-CoV-2 infection. Seroprevalence rate in recovered COVID-19 patients help us to identify individual with anti-SARS-CoV-2 antibodies and its protective nature. The objective of present study was to evaluate seroprevalence of SARS-CoV-2 among potential convalescent plasma donors and analysis of their deferral reasons. MATERIALS AND METHODS: A total 400 potential convalescent plasma donors were enrolled over five-month period for this prospective study. Inclusion criteria were lab confirmed COVID-19 recovered patients and 14 days of symptoms free period. All prospective plasmapheresis donors were tested for IgG SARS-CoV-2 antibody through chemiluminescent microparticle immunoassay, CBC, serum protein, blood grouping along with other required test for normal blood donation as per Drugs & Cosmetics Act. After pre donation testing and medical examination if donor was found to be ineligible for plasmapheresis was deferred. Seroprevalence rate was calculated by positive IgG antibody test results among the potential plasma donors. RESULTS: Seroprevalence rate was 87% for IgG SARS-CoV-2 antibodies in prospective convalescent plasma donors (recovered COVID-19 patients). There was no significant difference in seroprevalence rate between different sub-groups with respect to gender, age, blood groups, Rh factor, mode of treatment, day of Ab testing and repeat plasma donation. Most common reason for their deferral was absent IgG SARS-CoV-2 antibodies (13%) followed by absenteeism of eligible screen donors (6.7%), low Hb (1.7%) and poor veins for plasmapheresis (1.7%). Till five-month study period none of the plasmapheresis develop symptoms of reinfection with COVID-19. CONCLUSION: In all, 13% recovered patients did not develop IgG antibodies after SARS-CoV-2 infection. SARS-CoV-2 IgG antibodies persist for quite some time and are protective against reinfection. More long-term serology studies are needed to understand better antibody response kinetics and duration of persistence of IgG antibodies.

Engineering a pure and stable heterodimeric IgA for the development of multispecific therapeutics.

ABBREVIATIONS: CE-SDS: capillary electrophoresis sodium dodecyl sulfate; DSC: differential scanning calorimetry; FACS: fluorescence-activated cell sorting; FSA: full-sized antibody; Her2: human epidermal growth factor receptor 2; MFI: mean fluorescent intensity; OAA: one-armed antibody; PBS: phosphate-buffered saline; PDB: Protein Data Bank; SEC: size-exclusion chromatography; prepSEC (preparative SEC); RMSD: root-mean-square deviation; RU: resonance units; SPR: surface plasmon resonance; TAA: tumor-associated antigen; WT: wild-type.

Assessing Particle Formation of Biotherapeutics in Biological Fluids.

The stability of therapeutic proteins can be impacted in vivo after administration, which may affect patient safety or treatment efficacy, or both. Stability testing of therapeutic proteins using models representing physiologic conditions may guide preclinical development strategy; however, to date only a few studies assessing the physical stability are available in the public domain. In this manuscript, the stability of seven fluorescently labeled monoclonal antibodies (mAbs) was evaluated in human serum and phosphate-buffered saline, two models often discussed to be representative of the situation in humans after intravenous administration. Subvisible particles were analyzed using light obscuration, flow imaging, and imaging flow cytometry. All methods showed that serum itself formed particles under in vitro conditions. Imaging flow cytometry demonstrated that mean particle size and counts of mAbs increased substantially in serum over five days; however, particle formation in phosphate-buffered saline was comparably low. Stability differences were observed across the mAbs evaluated, and imaging flow cytometry data indicated that fluorescently labeled mAbs primarily interacted with serum components. The results indicate that serum may be more suitable as in vitro model to simulate physiologic intravenous conditions in patients closely and evaluate the in vivo stability of therapeutic proteins. Fluorescence labeling and detection methods may be applied to differentiate particles containing therapeutic protein from high amounts of serum particles that form over time.

Insights from a Pan India Sero-Epidemiological survey (Phenome-India Cohort) for SARS-CoV2.

To understand the spread of SARS-CoV2, in August and September 2020, the Council of Scientific and Industrial Research (India) conducted a serosurvey across its constituent laboratories and centers across India. Of 10,427 volunteers, 1058 (10.14%) tested positive for SARS-CoV2 anti-nucleocapsid (anti-NC) antibodies, 95% of which had surrogate neutralization activity. Three-fourth of these recalled no symptoms. Repeat serology tests at 3 (n = 607) and 6 (n = 175) months showed stable anti-NC antibodies but declining neutralization activity. Local seropositivity was higher in densely populated cities and was inversely correlated with a 30-day change in regional test positivity rates (TPRs). Regional seropositivity above 10% was associated with declining TPR. Personal factors associated with higher odds of seropositivity were high-exposure work (odds ratio, 95% confidence interval, p value: 2.23, 1.92-2.59, <0.0001), use of public transport (1.79, 1.43-2.24, <0.0001), not smoking (1.52, 1.16-1.99, 0.0257), non-vegetarian diet (1.67, 1.41-1.99, <0.0001), and B blood group (1.36, 1.15-1.61, 0.001).

Shelf-Life Extension of Fc-Fused Single Chain Fragment Variable Antibodies by Lyophilization.

Generation of sequence defined antibodies from universal libraries by phage display has been established over the past three decades as a robust method to cope with the increasing market demand in therapy, diagnostics and research. For applications requiring the bivalent antigen binding and an Fc part for detection, phage display generated single chain Fv (scFv) antibody fragments can rapidly be genetically fused to the Fc moiety of an IgG for the production in eukaryotic cells of antibodies with IgG-like properties. In contrast to conversion of scFv into IgG format, the conversion to scFv-Fc requires only a single cloning step, and provides significantly higher yields in transient cell culture production than IgG. ScFv-Fcs can be effective as neutralizing antibodies in vivo against a panel of pathogens and toxins. However, different scFv fragments are more heterologous in respect of stability than Fab fragments. While some scFv fragments can be made extremely stable, this may change due to few mutations, and is not predictable from the sequence of a newly selected antibody. To mitigate the necessity to assess the stability for every scFv-Fc antibody, we developed a generic lyophilization protocol to improve their shelf life. We compared long-term stability and binding activity of phage display-derived antibodies in the scFv-Fc and IgG format, either stored in liquid or lyophilized state. Conversion of scFv-Fcs into the full IgG format reduced protein degradation and aggregation, but in some cases compromised binding activity. Comparably to IgG conversion, lyophilization of scFv-Fc resulted in the preservation of the antibodies' initial properties after storage, without any drop in affinity for any of the tested antibody clones.

Antibody stability: A key to performance - Analysis, influences and improvement.

An antibody's stability greatly influences its performance (i.e. its specificity and affinity). Thus, stability is a major issue for researchers and manufacturers, especially with the increasing use of antibodies in therapeutics, diagnostics and rapid analytical platforms. Here we review antibody stability under five headings: (i) measurement techniques; (ii) stability issues in expression and production (expression, proteolysis, aggregation); (iii) effects of antibody format and engineering on stability and (iv) formulation, drying and storage conditions. We consider more than 100 sources, including patents, and conclude with (v) recommendations to promote antibody stability.

The formation and effect of mannitol hemihydrate on the stability of monoclonal antibody in the lyophilized state.

Crystalline bulking agent in lyophilized biopharmaceutical formulations provides an elegant lyophilized cake structure and allows aggressive primary drying conditions. The interplay between amorphous and crystalline state of excipients heavily influence the stability of lyophilized biological products and should be carefully evaluated in the formulation and process development phase. This study focuses on: (1) elucidating the influence of formulation and lyophilization process variables on the formation of different states of mannitol and (2) its impact on model monoclonal antibody stability when compared to sucrose. The main aim of the present research work was to study the influence of different mannitol to sucrose ratios and monoclonal antibody concentrations on mannitol physical form established during lyophilization. In addition, also the effect of process variables on mannitol hemihydrate (MHH) formation was under investigation. Thermal analysis and powder X-ray diffraction results revealed that the ratio between sucrose and mannitol and mAb concentration have a decisive impact on mannitol crystallization. Namely, increasing amount of mannitol and monoclonal antibody resulted in decreasing formation of MHH. From the process parameters investigated, a higher secondary drying temperature has the biggest impact on the complete dehydration of MHH. Specifically, higher secondary drying temperature reflected in complete dehydration of MHH. Annealing temperature was shown to affect the MHH content in the final product, wherein the higher annealing temperature was preferential for formation of anhydrous mannitol. Temperature stress stability study revealed that the most important parameter influencing monoclonal antibody stability is the ratio of protein to sucrose. Contrary to widespread assumption, we did not detect any impact of MHH on the stability of the investigated monoclonal antibody.

Variable Domain N-Linked Glycans Acquired During Antigen-Specific Immune Responses Can Contribute to Immunoglobulin G Antibody Stability.

Immunoglobulin G (IgG) can contain N-linked glycans in the variable domains, the so-called Fab glycans, in addition to the Fc glycans in the CH2 domains. These Fab glycans are acquired following introduction of N-glycosylation sites during somatic hypermutation and contribute to antibody diversification. We investigated whether Fab glycans may-in addition to affecting antigen binding-contribute to antibody stability. By analyzing thermal unfolding profiles of antibodies with or without Fab glycans, we demonstrate that introduction of Fab glycans can improve antibody stability. Strikingly, removal of Fab glycans naturally acquired during antigen-specific immune responses can deteriorate antibody stability, suggesting in vivo selection of stable, glycosylated antibodies. Collectively, our data show that variable domain N-linked glycans acquired during somatic hypermutation can contribute to IgG antibody stability. These findings indicate that introducing Fab glycans may represent a mechanism to improve therapeutic/diagnostic antibody stability.

In Silico Methods in Antibody Design.

Antibody therapies with high efficiency and low toxicity are becoming one of the major approaches in antibody therapeutics. Based on high-throughput sequencing and increasing experimental structures of antibodies/antibody-antigen complexes, computational approaches can predict antibody/antigen structures, engineering the function of antibodies and design antibody-antigen complexes with improved properties. This review summarizes recent progress in the field of in silico design of antibodies, including antibody structure modeling, antibody-antigen complex prediction, antibody stability evaluation, and allosteric effects in antibodies and functions. We listed the cases in which these methods have helped experimental studies to improve the affinities and physicochemical properties of antibodies. We emphasized how the molecular dynamics unveiled the allosteric effects during antibody-antigen recognition and antibody-effector recognition.

Functional stability of 3D8 scFv, a nucleic acid-hydrolyzing single chain antibody, under different biochemical and physical conditions.

3D8 single-chain Fv (scFv) is a catalytic nucleic acid antibody with anti-viral activity against a broad spectrum of viruses. Here we investigated the functional stability of 3D8 scFv to provide a basis for engineering a 3D8 scFv derivative and for developing stable formulations with improved stability and potential use as an anti-viral agent. The stability of 3D8 scFv was assessed by measuring its DNA-hydrolyzing activity under different biochemical and physical conditions using a fluorescence resonance energy transfer (FRET)-based method. In addition, the anti-influenza (H9N2) effect of 3D8 scFv was evaluated in A549 cells. 3D8 scFv was stable at 50°C for 6h at pH 7.2, for 3 days at pH 4-10 at 37°C and 30 days at pH 4-8 at 37°C. The stability was not affected by a reducing condition, freeze-thawing for up to 30 cycles, or lyophilization. Evaluation of the anti-virus effect showed that cells treated with 32-128 units of 3D8 scFv showed a 50% decrease in influenza replication compared to untreated cells. Based on its enzymatic stability in various biochemical and physical environments, 3D8 scFv holds good potential for development as an anti-viral therapeutic.

Characterization of a plant-produced recombinant human secretory IgA with broad neutralizing activity against HIV.

Recombinant Secretory IgA (SIgA) complexes have the potential to improve antibody-based passive immunotherapeutic approaches to combat many mucosal pathogens. In this report, we describe the expression, purification and characterization of a human SIgA format of the broadly neutralizing anti-HIV monoclonal antibody (mAb) 2G12, using both transgenic tobacco plants and transient expression in Nicotiana benthamiana as expression hosts (P2G12 SIgA). The resulting heterodecameric complexes accumulated in intracellular compartments in leaf tissue, including the vacuole. SIgA complexes could not be detected in the apoplast. Maximum yields of antibody were 15.2 µg/g leaf fresh mass (LFM) in transgenic tobacco and 25 µg/g LFM after transient expression, and assembly of SIgA complexes was superior in transgenic tobacco. Protein L purified antibody specifically bound HIV gp140 and neutralised tier 2 and tier 3 HIV isolates. Glycoanalysis revealed predominantly high mannose structures present on most N-glycosylation sites, with limited evidence for complex glycosylation or processing to paucimannosidic forms. O-glycan structures were not identified. Functionally, P2G12 SIgA, but not IgG, effectively aggregated HIV virions. Binding of P2G12 SIgA was observed to CD209 / DC-SIGN, but not to CD89 / FcalphaR on a monocyte cell line. Furthermore, P2G12 SIgA demonstrated enhanced stability in mucosal secretions in comparison to P2G12 IgG mAb.

The protective effect of albumin on bevacizumab activity and stability in PLGA nanoparticles intended for retinal and choroidal neovascularization treatments.

The rapidly growing applications of antibody-based therapeutics requires novel approaches to develop efficient drug delivery systems in which biodegradable polymeric nanoparticles are amongst the best candidates. In the present study bevacizumab loaded PLGA nanoparticles were formulated by water-in-oil-in-water emulsion method. Protein inactivation and aggregation are the major drawbacks of this technique. Therefore protective ability of various stabilizers was studied during entrapment process. Probable changes in VEGF165 binding capability of bevacizumab was assayed by ELISA which portrays the antibody's bio-efficiency. Probable breakage of bevacizumab and its secondary and tertiary structural integrity upon entrapment were analyzed by SDS-PAGE and circular dichroism spectroscopy, respectively. In vitro and ex vivo released bevacizumab from the prepared nanoparticles was also investigated. Results revealed that the protein interfacial adsorption is the foremost destabilizing factor in the double emulsion method and incorporation of appropriate concentrations of albumin could protect bevacizumab against entrapment stress. Ex vivo release results, in rabbit vitreous, indicated the ability of prepared nanoparticles in prolonged release of the active antibody. Consequently this approach was an attempt to achieve sustained release PLGA nanoparticle formulation with the aim of protecting integrity and performance of entrapped bevacizumab.

Improving biophysical properties of a bispecific antibody scaffold to aid developability: quality by molecular design.

While the concept of Quality-by-Design is addressed at the upstream and downstream process development stages, we questioned whether there are advantages to addressing the issues of biologics quality early in the design of the molecule based on fundamental biophysical characterization, and thereby reduce complexities in the product development stages. Although limited number of bispecific therapeutics are in clinic, these developments have been plagued with difficulty in producing materials of sufficient quality and quantity for both preclinical and clinical studies. The engineered heterodimeric Fc is an industry-wide favorite scaffold for the design of bispecific protein therapeutics because of its structural, and potentially pharmacokinetic, similarity to the natural antibody. Development of molecules based on this concept, however, is challenged by the presence of potential homodimer contamination and stability loss relative to the natural Fc. We engineered a heterodimeric Fc with high heterodimeric specificity that also retains natural Fc-like biophysical properties, and demonstrate here that use of engineered Fc domains that mirror the natural system translates into an efficient and robust upstream stable cell line selection process as a first step toward a more developable therapeutic.