Antifungal Activity of New Diterpenoid Alkaloids Isolated by Different Chromatographic Methods from Delphinium peregrinum L. var. eriocarpum Boiss.

This paper aimed to investigate the potential antifungal influences of new alkaloids from Delphinium peregrinum L. var. eriocarpum Boiss. New Diterpenoid alkaloids Delcarpum (1), Hydrodavisine (4) and known alkaloids Peregrine (2), Delphitisine (3) were isolated by different chromatographic methods from the aerial parts of D. Peregrinum eriocarpum Boiss, which grows in Syria. The structures of alkaloids were proposed based on 1D NMR spectroscopy 1H-NMR, 13C-NMR, DEPT-135, DEPT-90, 2D NMR spectroscopy DQF-COSY, HMQC, EI-Ms mass spectrum, and IR spectroscopic measurements. The antifungal activity of the isolated alkaloids was evaluated against different dermatophyte fungal isolates compared with fluconazole. In the case of Peregrine (2) the minimum inhibitory concentrations(MICs) recorded 128-256, 32-64, and 32 for Epidermophyton floccosum, Microsporum canis, and Trichophyton rubrum, respectively, compared to 32-64, 16, and 32 µg/mL in the case of fluconazole, respectively. The MICs recorded on application of the four alkaloids mixture were 64, 32, and 16 in the case of E. floccosum, M. canis, and T. rubrum, respectively, which were significantly lower than that measured for each of the individual alkaloid and were compatible for fluconazole. In conclusion, MICs of the tested alkaloids showed a variable potential effect on the investigated fungal isolates. Peregrine (2) was the most effective alkaloid, however, the application of the mixture of alkaloids induced significant synergistic activity that was more pronounced than the application of individual ones.

Development and Evaluation of Buccal Films Based on Chitosan for the Potential Treatment of Oral Candidiasis.

In this work, chitosan films were prepared by a casting/solvent evaporation methodology using pectin or hydroxypropylmethyl cellulose to form polymeric matrices. Miconazole nitrate, as a model drug, was loaded into such formulations. These polymeric films were characterized in terms of mechanical properties, adhesiveness, and swelling as well as drug release. Besides, the morphology of raw materials and films was investigated by scanning electron microscopy; interactions between polymers were analyzed by infrared spectroscopy and drug crystallinity studied by differential scanning calorimetry and X-ray diffraction. In addition, antifungal activity against cultures of the five most important fungal opportunistic pathogens belonging to Candida genus was investigated. Chitosan:hydroxypropylmethyl cellulose films were found to be the most appropriate formulations in terms of folding endurance, mechanical properties, and adhesiveness. Also, an improvement in the dissolution rate of miconazole nitrate from the films up to 90% compared to the non-loaded drug was observed. The in vitro antifungal activity showed a significant activity of the model drug when it is loaded into chitosan films. These findings suggest that chitosan-based films are a promising approach to deliver miconazole nitrate for the treatment of candidiasis.

Simple fluorescence-based high throughput cell viability assay for filamentous fungi.

UNLABELLED: Filamentous fungi are important model organisms to understand the eukaryotic process and have been frequently exploited in research and industry. These fungi are also causative agents of serious diseases in plants and humans. Disease management strategies include in vitro susceptibility testing of the fungal pathogens to environmental conditions and antifungal agents. Conventional methods used for antifungal susceptibilities are cumbersome, time-consuming and are not suitable for a large-scale analysis. Here, we report a rapid, high throughput microplate-based fluorescence method for investigating the toxicity of antifungal and stress (osmotic, salt and oxidative) agents on Magnaporthe oryzae and compared it with agar dilution method. This bioassay is optimized for the resazurin reduction to fluorescent resorufin by the fungal hyphae. Resazurin bioassay showed inhibitory rates and IC50 values comparable to the agar dilution method and to previously reported IC50 or MICs for M. oryzae and other fungi. The present method can screen range of test agents from different chemical classes with different modes of action for antifungal activities in a simple, sensitive, time and cost effective manner. SIGNIFICANCE AND IMPACT OF THE STUDY: A simple fluorescence-based high throughput method is developed to test the effects of stress and antifungal agents on viability of filamentous fungus Magnaporthe oryzae. This resazurin fluorescence assay can detect inhibitory effects comparable to those obtained using the growth inhibition assay with added advantages of simplicity, time and cost effectiveness. This high throughput viability assay has a great potential in large-scale screening of the chemical libraries of antifungal agents, for evaluating the effects of environmental conditions and hyphal kinetic studies in mutant and natural populations of filamentous fungi.

Effects of ferulic acid combined with light irradiation on deoxynivalenol and its production in Fusarium graminearum.

This study aimed to investigate the effects of ferulic acid (FA), a natural phenolic phytochemical, in combination with light irradiation at three wavelengths (365, 385 and 405 nm) on the concentration and toxicity of deoxynivalenol (DON), a mycotoxin produced by Fusarium graminearum. Moreover, this study examined the influence of the combination treatment on DON production in the cultured fungus. FA activated by light at a peak wavelength of 365 nm exhibited the most effective decrease in DON concentration of the tested wavelengths; a residual DON ratio of 0.23 at 24 h exposure was observed, compared with the initial concentration. The reduction in DON using 365-nm light was dependent on the concentration of FA, with a good correlation (r2 = 0.979) between the rate constants of DON decrease and FA concentration, which was confirmed by a pseudo-first-order kinetics analysis of the photoreaction with different FA concentrations (50-400 mg/L) for 3 h. The viability of HepG2 cells increased by 56.7% following in vitro treatment with a mixture containing the photoproducts obtained after treatment with 20 mg/L DON and 200 mg/L FA under 365-nm irradiation for 6 h. These results suggested that the photoreaction of FA under 365-nm irradiation induces the detoxification of DON through degradation or modification of DON. The antifungal effects of the combination (FA and 365-nm light) on F. graminearum were investigated. Conidia treated with the combination did not show additive or synergistic inhibition of fungal biomass and DON production in 7-day cultivated fungal samples compared with samples after single treatment. However, successive treatment, composed of 90 min irradiation at 365 nm and then treatment with 200 mg/L FA for 90 min in the dark, suppressed fungal growth and DON yield to 70% and 25% of the untreated sample level, respectively. This photo-technology involving the two treatment methods of 365-nm irradiation and FA addition as a food-grade phenolic acid in combination or successively, can aid in developing alternative approaches to eliminate fungal contaminants in the fields of environmental water and agriculture. However, further research is required to explore the underlying mechanisms of DON decontamination and its biosynthesis in F. graminearum.

A novel procedure for the quantification of antifungal activity against filamentous fungi, mycelial invasion distance (MID) method.

A novel method for the quantification of antifungal activity of fungicides and painted surfaces, mycelial invasion distance (MID) method, was developed and applied to the quantification of activities of parabens and an antifungal paint. In this method, the MID of aerial mycelia on a test paper or a panel placed on a nutrient agar plate was measured with a stereoscopic microscope and a micro-ruler. The antifungal activities of the parabens and painted surfaces were expressed as the MID. The higher the hydrophobicity of parabens, the longer the MID, that is the lower the antifungal activity, were observed. Conversely, relatively polar parabens, such as methyl and ethyl parabens, exhibited stronger antifungal activity, that is shorter MID. The most hydrophobic paraben, benzyl paraben, showed the weakest antifungal activity. Furthermore, it was confirmed that the MID method was effective for the evaluation of the painted surfaces.

Methods for screening and evaluation of antimicrobial activity: A review of protocols, advantages, and limitations.

Infectious diseases pose a formidable global challenge, compounded by the emergence of antimicrobial resistance. Consequently, researchers are actively exploring novel antimicrobial compounds as potential solutions. This endeavor underscores the pivotal role of methods employed for screening and evaluating antimicrobial activity-a critical step in discovery and characterization of antimicrobial agents. While traditional techniques such as well-diffusion, disk-diffusion, and broth-dilution are commonly utilized in antimicrobial assays, they may encounter limitations concerning reproducibility and speed. Additionally, a diverse array of antimicrobial assays including cross-streaking, poisoned-food, co-culture, time-kill kinetics, resazurin assay, bioautography, etc., are routinely employed in antimicrobial evaluations. Advanced techniques such as flow-cytometry, impedance analysis, and bioluminescent technique may offer rapid and sensitive results, providing deeper insights into the impact of antimicrobials on cellular integrity. However, their higher cost and limited accessibility in certain laboratory settings may present challenges. This article provides a comprehensive overview of assays designed to characterize antimicrobial activity, elucidating their underlying principles, protocols, advantages, and limitations. The primary objective is to enhance understanding of the methodologies designed for evaluating antimicrobial agents in our relentless battle against infectious diseases. By selecting the appropriate antimicrobial testing method, researchers can discern suitable conditions and streamline the identification of effective antimicrobial agents.

Thymus vulgaris Essential Oil in Beta-Cyclodextrin for Solid-State Pharmaceutical Applications.

Antimicrobial resistance related to the misuse of antibiotics is a well-known current topic. Their excessive use in several fields has led to enormous selective pressure on pathogenic and commensal bacteria, driving the evolution of antimicrobial resistance genes with severe impacts on human health. Among all the possible strategies, a viable one could be the development of medical features that employ essential oils (EOs), complex natural mixtures extracted from different plant organs, rich in organic compounds showing, among others, antiseptic properties. In this work, green extracted essential oil of Thymus vulgaris was included in cyclic oligosaccharides cyclodextrins (CD) and prepared in the form of tablets. This essential oil has been shown to have a strong transversal efficacy both as an antifungal and as an antibacterial agent. Its inclusion allows its effective use because an extension of the exposure time to the active compounds is obtained and, therefore, a more marked efficacy, especially against biofilm-producing microorganisms such as P. aeruginosa and S. aureus, was registered. The efficacy of the tablet against candidiasis opens their possible use as a chewable tablet against oral candidiasis and as a vaginal tablet against vaginal candidiasis. Moreover, the registered wide efficacy is even more positive since the proposed approach can be defined as effective, safe, and green. In fact, the natural mixture of the essential oil is produced by the steam current method; therefore, the manufacturer employs substances that are not harmful, with very low production and management costs.

Goldenrod Root Compounds Active against Crop Pathogenic Fungi.

Root extracts of three goldenrods were screened for antimicrobial compounds. 2Z,8Z- and 2E,8Z-matricaria esters from European goldenrod (Solidago virgaurea) and E- and Z-dehydromatricaria esters from grass-leaved goldenrod (Solidago graminifolia) and first from showy goldenrod (Solidago speciosa) were identified by high-performance thin-layer chromatography combined with effect-directed analysis and high-resolution mass spectrometry or nuclear magnetic resonance spectroscopy after liquid chromatographic fractionation and isolation. Next to their antibacterial effects (against Bacillus subtilis, Aliivibrio fischeri, and Pseudomonas syringae pv. maculicola), they inhibited the crop pathogenic fungi Fusarium avenaceum and Bipolaris sorokiniana with half maximal inhibitory concentrations (IC50) between 31 and 107 µg/mL. Benzyl 2-hydroxy-6-methoxybenzoate, for the first time found in showy goldenrod root, showed the strongest antifungal effect, with IC50 of 25-26 µg/mL for both fungal strains.

A Simple Antifungal assay for Testing Actinomycetes and Other Microbial Extracts.

Antifungal assay in vitro is a useful tool for the characterization of biological activity of microbial extracts. Here we describe a simple in vitro test at two final extract concentrations that allows long-term storage of the plates containing dry extracts before using. The assay protocol is described for two fungal strains, a unicellular yeast, with clinical interest (Candida albicans), and a sporulated and phytopathogenic filamentous fungus (Botrytis cinerea). They could serve as models for adapting other filamentous/yeast-like fungi.Plates are prepared by placing 100 and 10 µg, respectively, of the organic extracts in microtiter 96-well plates, where the test will be performed. The assay develops by adding 200 µL of a spore suspension 104 spores/mL for B. cinerea and 106 cells/mL for C. albicans in Sabouraud medium.After the incubation of the plates at 25 °C, for 2 days for C. albicans and 5 days for B. cinerea , the growth of the fungal targets is evaluated in a plate reader for unicellular yeast , or visually under the microscope for filamentous fungi. If visually evaluated, observed growth can be assigned to different categories by comparison with growth control and inhibition control. Inhibition effect on C. albicans at eight concentrations of amphotericin B (8-4-2-1-0.5-0.25-0.125-0.00625 µg/mL) or B. cinerea exposed of eight concentrations of iprodione (100-50-10-5-1-0.5-0.1-0.05 µg/mL) are used as inhibition controls, respectively.

Taste masking and rheology improvement of drug complexed with beta-cyclodextrin and hydroxypropyl-ß-cyclodextrin by hot-melt extrusion.

This study aimed to mask fluconazole (FLU) taste and improve its rheological properties by an efficient process of cyclodextrin complexation. For this, hot-melt extrusion (HME) was used to obtain extrudates composed of FLU, hydroxypropylcellulose, and one of two different cyclodextrins (ß-cyclodextrin or hydroxypropyl-ß-cyclodextrin) maintaining the drug:cyclodextrin molar ratio at 1:0.3 or 1:0.2, respectively. Samples were characterized by physicochemical tests, palatability using e-tongue and antifungal assays. Drug stability was preserved after HME, according to spectroscopy test (correlation coefficient >0.9) and HPLC-assay (100-107%). Flowability was improved in HME systems with compressibility of <12%. Similarly, floodability exhibited significant enhancement (dispersibility <10%). Whereas extrudates of FLU containing only the polymeric matrix led to a slow drug dissolution efficiency (18.6%) and a partial drug taste masking; extrudates containing cyclodextrin accelerated FLU dissolution (dissolution efficiency approx. 30%) and provided a complete drug taste masking. Moreover, HME process could produce drug complexes with high complexation efficiency and preserve its antifungal activity.

In vitro antifungal activity of allyl isothiocyanate (AITC) against Aspergillus parasiticus and Penicillium expansum and evaluation of the AITC estimated daily intake.

Isothiocyanates (ITCs) are natural compounds derived from cruciferous vegetables produced by enzymatic conversion of metabolites called glucosinolates. They are potentially useful antimicrobial compounds for food applications have been shown to be promising agents against cancer in human cell culture, animal models, and in epidemiological studies. In this study, the antifungal activity of the allyl isothiocyanate (AITC) was evaluated on two mycotoxigenic fungi as Aspergillus parasiticus and Penicillium expnsum, aflatoxins (AFs) and patulin (PAT) producers, employing an assay on solid medium. Also an approximation of the risk evaluation associated to the intake of food treated with the AITC to reduce the risk of fungi spoilage has been evaluated. On solid medium and after 20 days incubation the strain of Penicillium expansum was inhibited with AITC quantities highest than 50 mg, whereas the strain of A. parasiticus was sensible to AITC doses highest than 5 mg. The analysis of the risk assessment associated to the intake of several food classes treated with the bioactive compound AITC to prevent fungi spoilage evidenced that this product can be considered as safe due that the estimated daily intakes (EDIs) are always lower than the AITC Admissible Daily intake (ADI).