RESUMO
The capacitive method is considered to be a suitable icing-detection technology, but the lack of fundamental parameters restricts the development of icing-detection sensors. In this paper, an artificial icing laboratory, a capacitive sensor, and some simulation conductors have been designed for obtaining the artificial icing samples. Subsequently, the same characteristic values of artificial icing have been measured by an LCR device, under a selected frequency. This research found that the value of the icing dielectric constant closely correlated with its density, internal sublayer, and the test temperature. Finally, a fitting formula has been presented for calculating the relative dielectric constant, which may provide some important reference value for the design of icing-detection sensors.
RESUMO
Atmospheric icing has become a global concern due to hazardous consequences of ice accretion on air, land, and sea transport and infrastructure. Icephobic surfaces due to their physicochemical properties facilitate a decrease in ice and snow accumulation under outdoor conditions. However, a serious problem of most superhydrophobic surfaces described in the literature is poor operational durability under harsh corrosive and abrasive loads characteristic of atmospheric operation. Here, we elucidate main surface phenomena determining the anti-icing behavior and show experimentally how different mechanisms contribute to long-term durability. For comprehensive exploitation of those mechanisms, we have applied a recently proposed strategy based on fine-tuning of both laser processing and protocols of deposition of the fluorooxysilanes onto the nanotextured surface. Prolonged outdoor tests evidence that a developed strategy for modification of materials on the nanolevel allows overcoming the main drawbacks of icephobic coatings reported so far and results in resistance to destroying atmospheric impacts.