Azomethine-Containing Pyrrolo[3,2-b]pyrrole Copolymers for Simple and Degradable Conjugated Polymers.

Conjugated polymers have received significant attention as potentially lightweight and highly tailorable alternatives to inorganic semiconductors, but their synthesis is often complex, produces toxic byproducts, and they are not typically designed to be degradable or recyclable. These drawbacks necessitate dedicated efforts to discover materials with design motifs that enable targeted and efficient degradation of conjugated polymers. In this vein, the synthetic simplicity of 1,4-dihydropyrrolo[3,2-b]pyrroles (DHPPs) is exploited to access azomethine-containing copolymers via a benign acid-catalyzed polycondensation protocol. Polymerizations involve reacting a dialdehyde-functionalized dihydropyrrolopyrrole with p-phenylenediamine as the comonomer using p-toluenesulfonic acid as a catalyst. The inherent dynamic equilibrium of the azomethine bonds subsequently enabled the degradation of the polymers in solution in the presence of acid. Degradation of the polymers is monitored via NMR, UV-vis absorbance, and fluorescence spectroscopies, and the polymers are shown to be fully degradable. Notably, while absorbance measurements reveal a continued shift to higher energies with extended exposure to acid, fluorescence measurements show a substantial increase in the fluorescence response upon degradation. Results from this study encourage the continued development of environmentally-conscious polymerizations to attain polymeric materials with useful properties while simultaneously creating polymers with structural handles for end-of-life management or/and recyclability.

Synthesis, Structure, Spectral-Luminescent Properties, and Biological Activity of Chlorine-Substituted N-[2-(Phenyliminomethyl)phenyl]-4-methylbenzenesulfamide and Their Zinc(II) Complexes.

New azomethine compounds of 2-(N-tosylamino)benzaldehyde or 5-chloro-2-(N-tosylamino)benzaldehyde and the corresponding chlorine-substituted anilines, zinc(II) complexes based on them have been synthesized. The structures of azomethines and their complexes were determined by elemental analysis, IR, 1H NMR, X-ray spectroscopy, and X-ray diffraction. It is found that all ZnL2 complexes have a tetrahedral structure according to XAFS and X-ray diffraction data. The photoluminescent properties of azomethines and zinc complexes in methylene chloride solution and in solid form have been studied. It is shown that the photoluminescence quantum yields of solid samples of the complexes are an order of magnitude higher compared to the solutions and range from 11.34% to 48.3%. The thermal properties of Zn(II) complexes were determined by thermal gravimetric analysis (TGA) and differential scanning calorimetry. The TGA curves of all the compounds suggest their high thermal stability up to temperatures higher than 290 °C. The electrochemical properties of all complexes were investigated by the cyclic voltammetry method. The multilayered devices ITO/PEDOT:PSS/NPD/Zn complex/ TPBI/LiF/Al with wide electroluminescence (EL) color range spanning the range from bluish-green (494 nm) to green (533 nm) and the high values of brightness, current and power efficiency were fabricated. The biological activity of azomethines and zinc complexes has been studied. In the case of complexes, the protistocidal activity of the zinc complex with azomethine of 5-chloro-2-(N-tosylamino)benzaldehyde with 4-chloroaniline was two times higher than the activity of the reference drug toltrazuril.

Synthesis and Characterization of New Conjugated Azomethines End-Capped with Amino-thiophene-3,4-dicarboxylic Acid Diethyl Ester.

A new series of thiophene-based azomethines differing in the core structure was synthesized. The effect of the central core structure in azomethines on the thermal, optical and electrochemical properties was investigated. The obtained compounds exhibited the ability to form a stable amorphous phase with a high glass transition temperature above 100 °C. They were electrochemically active and undergo oxidation and reduction processes. The highest occupied (HOMO) and the lowest unoccupied molecular (LUMO) orbitals were in the range of -3.86--3.60 eV and -5.46--5.17 eV, respectively, resulting in a very low energy band gap below 1.7 eV. Optical investigations were performed in the solvents with various polarity and in the solid state as a thin film deposited on a glass substrate. The synthesized imines absorbed radiation from 350 to 600 nm, depending on its structure and showed weak emission with a photoluminescence quantum yield below 2.5%. The photophysical investigations were supported by theoretical calculations using the density functional theory. The synthesized imines doped with lithium bis-(trifluoromethanesulfonyl)imide were examined as hole transporting materials (HTM) in hybrid inorganic-organic perovskite solar cells. It was found that both a volume of lithium salt and core imine structure significantly impact device performance. The best power conversion efficiency (PCE), being about 35-63% higher compared to other devices, exhibited cells based on the imine containing a core tiphenylamine unit.

Mesomorphic Behavior of Symmetric Azomethine Dimers Containing Different Chromophore Groups.

A series of new azomethine dimers was synthesized by the condensation reaction of flexible bis-benzaldehydes with four aromatic amines containing phenyl, naphthyl, anthracene and pyrene groups. Their right structure was confirmed by FTIR and 1H-NMR spectroscopy and their thermal properties were investigated by thermogravimetric analysis, differential scanning calorimetry and polarized light optical microscopy. A view on their photophysical behavior was gained by UV-vis and photoluminescence spectroscopy. The dimers containing pyrene and anthracene presented liquid crystalline behavior, while the other dimers were crystalline compounds. Two dimers containing pyrene moieties formed mesomorphic glasses and had intense luminescence, promising properties for applications in building optoelectronic devices.

Preparation and Characterization of poly(Azomethines) Containing Ether and Methylene Bridges: Photophysical, Electrochemical, Conductivity and Thermal Properties.

In this paper, a series of polyazomethines (PAZs) were prepared using dihydroxy substituted Schiff bases and 1,4-diiodobenzene. Also, different group effect such as methylene carbon and etheric oxygen bridges on photophysical, electrochemical, conductivity and thermal properties were clarified. The new polymeric materials structures were confirmed by means of 1H-NMR, FT-IR and UV-vis measurements. The molecular weight distributions of polymers were determined with gel permeation chromatography (GPC) measurements. Photophysical behaviors of polymers were explored by UV-vis absorption and fluorescence measurements. TGA-DTA and DSC techniques have been used for the thermal characterization of the PAZs. Thermal data and fluorescence measurements showed that etheric oxygen bridge containing polymers have a bit higher char and emission intensity than the methylene carbon bridge carrying polymers. According to TG analysis, Ton values of P-2MPDP, P-2-OPDP, P-4-MPDP and P-4-OPDP were found as 210, 250, 249 and 233 °C, respectively. The HOMO-LUMO energy levels, electrochemical (E' g ) and optical (E g ) band gaps were calculated from cyclic voltammetry (CV) and UV-vis measurements, respectively. The electrochemical (E g ') band gaps values of P-2MPDP, P-2-OPDP, P-4-MPDP and P-4-OPDP were calculated as 2.68, 2.32, 2.34 and 2.07, respectively. Additionally, four-point probe technique was used to measure solid state electrical conductivities of both doped and undoped states of the PAZs.

Chiral Phosphoric Acid-Catalyzed Enantioselective Formal [3+2] Cycloaddition of Azomethine Imines with Enecarbamates.

The first catalytic asymmetric inverse electron demand 1,3-dipolar cycloaddition of azomethine imines with enecarbamates has been developed. Isoquinoline-fused pyrazolidines containing two or three contiguous stereogenic centers were obtained in high yields with excellent regio-, diastereo-, and enantioselectivities. The pyrazolidine ring can be opened to install an aminal, α-amino nitrile, or homoallylamine function with an excellent control of the newly generated stereogenic center. Access to aminobenzo[a]quinolizidine is also documented.

Crystal structure of (Z)-3-benz-yloxy-6-[(2-hy-droxy-5-methyl-anilino)methyl-idene]cyclo-hexa-2,4-dien-1-one.

In the title Schiff base compound, C21H19NO3, the conformation about the C=C bond is Z. The N-H group and carbonyl O atom form an intra-molecular N-H⋯O hydrogen bond with an S(6) ring motif. The benz-yloxy ring and the 2-hy-droxy-5-methyl-phenyl ring are inclined to the central six-membered ring by 13.68 (9) and 9.13 (8)°, respectively, and to one another by 21.95 (9)°. In the crystal, mol-ecules are linked by O-H⋯O hydrogen bonds, forming helical chains along [010].

Crystal structure of (Z)-3-benz-yloxy-6-[(2-hy-droxy-anilino)methyl-idene]cyclo-hexa-2,4-dien-1-one.

In the title compound, C20H17NO3, the methyl-idene-cyclo-hexa-2,4-dienone moiety is approximately planar [maximum deviation = 0.0615 (10) Å] and is oriented at diherdral angles of 69.60 (7) and 1.69 (9)° to the phenyl and hy-droxy-benzene rings, respectively. The amino group links with the carbonyl O atom via an intra-molecular N-H⋯O hydrogen bond, forming an S(6) ring motif. In the crystal, the mol-ecules are linked by O-H⋯O hydrogen bonds and weak C-H⋯O and C-H⋯π inter-actions, forming a three-dimensional supra-molecular architecture.

Zinc Complexes of Fluorosubstituted N-[2-(Phenyliminomethyl)phenyl]-4-methylbenzenesulfamides: Synthesis, Structure, Luminescent Properties, and Biological Activity.

Mono-, di-, and trifluorophenyl substituted in different positions of amine fragments bis [2-[[(E)-((fluorophenyl)iminomethyl]-N-(p-tolylsulfonyl)anilino]zinc(II) complexes were synthesized. Their crystal structure, photo- and electroluminescent properties, and protistocidal, fungistatic, and antibacterial activities were studied. It has been shown that the introduction of fluorine atoms and an increase in their number in the ligand structure of the resulting metal complexes promote the luminescence quantum yields and values of performance and brightness in EL cells compared to their previously studied chlorine-substituted analogs.

The six-membered-ring azomethine N-((E)-{5-[(E)-(pyridin-3-ylimino)methyl]thiophen-2-yl}methylidene)pyridin-3-amine.

The title compound, C16H12N4S, forms a three-dimensional layered network structure via intermolecular hydrogen bonding and π-stacking. The azomethine molecule adopts the thermodynamically stable E regioisomer and the pyridine substituents are antiperiplanar. The mean planes of the pyridine rings and the azomethine group to which they are connected are twisted by 27.27 (5) and 33.60 (5)°. The electrochemical energy gap of 2.3 eV based on the HOMO-LUMO energy difference is in agreement with the spectroscopically derived value.

Secosteroid-quinoline hybrids as new anticancer agents.

An elegant approach to unknown secosteroid-quinoline hybrids is disclosed. A series of 13,17-secoestra-1,3,5(10)-trien-17-oic acid [N'-(iso)quinolylmethylene]hydrazides was prepared and these novel type of secosteroids was screened for antiproliferative activity against estrogen-responsive human breast cancer cell line MCF-7. Most of the synthesized compounds showed a cytotoxic effect superior to that of reference drug cisplatin; the lead compound exhibits the highest activity with the IC50 value of about 0.8 µM and is 7 times more active than cisplatin. A high selectivity index was observed for the hit 13,17-secoestra-1,3,5(10)-trien-17-oic acid [N'-quinolylmethylene]hydrazides 2a and 2c. Compounds 2a and 2c evaluated in luciferase reporter assays exhibited high antiestrogenic potency which was superior to that of tamoxifen. These hit compounds were characterized by high activity against MCF-7 cells that retained towards multidrug-resistant NCI/ADR-RES cells.

Spectroscopic and Physicochemical Investigations of Azomethines with Triphenylamine Core towards Optoelectronics.

Three new azomethines based on triphenylamine with two or three substituents were obtained. Chemical structure and purity were confirmed by 1H NMR, FTIR elemental analysis and mass spectroscopy. The investigations were focused on the relationship between chemical structure and properties important for optoelectronic materials. Thus, the studies of thermal, optical and electrochemical properties were carried out based on differential scanning calorimetry, thermogravimetric analysis, electronic absorption, photoluminescence and cyclic voltammetry measurements. The ongoing consideration of experimental results was complemented by theoretical calculations using the density functional theory method. The donor activity of obtained compounds was tested in bulk-heterojuntion photovoltaic cells with structure ITO/PEDOT:PSS/imine:PCBM/Al and ITO/PEDOT:PSS/imine:P3HT:PCBM/Al). The effect of the presence of the amino-thiophene-3,4-dicarboxylic acid diethyl ester groups and various number of hexyloxyphenyl units on imines properties was demonstrated.

In Vivo Radioprotective Potential of Newly Synthesized Azomethine and Styrylquinoline Derivatives and a Natural Polyphenol: A Preliminary Study.

The aim of the present study was to investigate the radioprotective activity of silymarin, a plant substance with hepatoprotective activity, of four newly synthesized structural derivatives of anthranilic acid azomethines, and alkyl-2-styrylquinolinic acid, as well as to establish and assess the influence of the solvent type and bioactive compound dose on the in vivo radioprotective potential of the natural and novel synthetic compounds. Male Wistar strain rats weighing 110-120 g were used for the in vivo experiments. Fifteen minutes after i.p. injection of the compounds, the experimental animals were irradiated by 8 Gy. Results indicate that the compound 2-{[(3,5-dihydro-2-hydroxyphenyl)methylen] amino}-benzoic acid in a dose of 60 mg/kg body weight exhibited the highest radioprotective effect, whereas the natural extract silymarin did not manifest radioprotective potential, even in high doses.

Secosteroidal hydrazides: Promising scaffolds for anti-breast cancer agents.

A convenient and selective approach to 13,17-secoestra-1,3,5(10)-trien-17-oic acid hydrazides and their N'-(het)arylmethylene derivatives was disclosed and these novel types of secosteroids were screened for cytotoxicity against hormone-dependent human breast cancer cell line MCF-7. A number of 13,17-secoestra-1,3,5(10)-trien-17-oic acid [N'-(het)arylmethylene]hydrazides show significant cytotoxic effect comparable or superior to that for reference drug cisplatin. Compound 3l exhibits the highest activity with the IC50 value of about 2 µM and is 2.8 times more active than cisplatin. Hit 13,17-secoestra-1,3,5(10)-trien-17-oic acid [N'-(het)arylmethylene]hydrazides 3d, 3l and 3q are characterized by high cytotoxicity and good selectivity towards MCF-7 breast cancer cells. The synthesized secosteroids may be considered as new promising antitumor agents.

The Effect of Alkyl Substitution of Novel Imines on Their Supramolecular Organization, towards Photovoltaic Applications.

Three novel conjugated polyazomethines have been obtained by polycondensation of diamines consisting of the diimine system, with either 2,5-bis(octyloxy)terephthalaldehyde or 9-(2-ethylhexyl)carbazole-3,6-dicarboxaldehyde. Partial replacement of bulky solubilizing substituents with the smaller side groups has allowed to investigate the effect of supramolecular organization. All obtained compounds have been subsequently identified using the NMR and FTIR spectroscopies and characterized by the thermogravimetric analysis, differential scanning calorimetry, cyclic voltammetry, UV-Vis spectroscopy, and X-ray diffraction. Investigated polymers have shown a good thermal stability and high glass transition temperatures. X-ray measurements have proven that partial replacement of octyloxy side chains with smaller methoxy groups induced a better planarization of macromolecule. Such modification has tuned the LUMO level of this molecule and caused a bathochromic shift of the lowest energy absorption band. On the contrary, imines consisting of N-ethylhexyl substituted carbazole units have not been so clearly affected by alkyl chain length modification. Photovoltaic activity of imines (acting as a donor) in bulk-heterojunction systems has been observed for almost all studied compounds, blended with the fullerene derivative (PCBM) in various weight ratios.

Spectroscopic and electrochemical properties of thiophene-phenylene based Shiff-bases with alkoxy side groups, towards photovoltaic applications.

The influence of presence and elongation of alkoxy side chains in the π-conjugated Schiff-bases has been considered on the basis of UV-Vis absorption and photoluminescence spectra of model compounds and polymers solutions in chloroform and binary solvents of different polarity. The results of these investigations have been supported by electrochemical data. It has been demonstrated that introduction of electron donating methoxy side groups decreases the energy gap, however the elongation of alkyl chains only slightly affects the electronic structure of model compounds. In the case of polymers, such octyloxy side chains improves the solubility, enabling formation of longer polymer chains, with the enhanced effective π-conjugation length and narrower energy gap, however the intensity of emission band clearly decreased. Positive solvatochromism has been observed in both absorbance and photoluminescence spectra for all investigated compounds. As the concluding task, bulk-heterojunction (BHJ) photovoltaic (PV) structures, consisting of polyazomethines blended with the fullerene derivative, [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) have been prepared and tested in the context of potential application in solar cells. All investigated polymers have shown the photovoltaic effect, but the best power conversion efficiency and other PV parameters have been obtained for polyazomthine with octyloxy side chains.

Crystal Structure Determination of 4-[(Di-p-tolyl-amino)-benzylidene]-(5-pyridin-4-yl-[1,3,4]thiadiazol-2-yl)-imine along with Selected Properties of Imine in Neutral and Protonated Form with Camforosulphonic Acid: Theoretical and Experimental Studies.

The crystal structure was determined for the first time for 4-[(di-p-tolyl-amino)benzylidene]-(5-pyridin-4-yl-[1,3,4]thiadiazol-2-yl)-imine (trans-PPL9) by X-ray diffraction. The imine crystallized in the monoclinic P21/n space group with a = 18.9567(7) Å, b = 6.18597(17) Å, c = 22.5897(7) Å, and ß = 114.009(4)°. Intermolecular interactions in the PPL9 crystal were only weak C-H⋯N hydrogen bonds investigated using the Hirshfeld surface. The electronic and geometric structure of the imine were investigated by the density functional theory and the time-dependent density-functional theory. The properties of the imine in neutral and protonated form with camforosulphonic acid (CSA) were investigated using cyclic voltammetry, UV-vis and 1H NMR spectroscopy. Theoretical and experimental studies showed that for the 1:1 molar ratio the protonation occured on nitrogen in pyridine in the PPL9 structure, as an effect of Brönsted acid-base interactions. Thermographic camera was used to defined defects in constructed simple devices with ITO/PPL9 (or PPL9:CSA)/Ag/ITO architecture. In conclusion, a thermally stable imine was synthesized in crystalline form and by CSA doping, a modification of absorption spectra together with reduction of overheating process was observed, suggesting its potential application in optoelectronics.

Crystal structure and Hirshfeld surface analysis of 3-[(1E)-(4-{4-[(E)-(3-hy-droxy-benzyl-idene)amino]-phen-oxy}phenyl-imino)-meth-yl]phenol.

In the crystal, the mol-ecule of the title compound, C26H20N2O3, has crystallographically imposed twofold rotation symmetry. The crystal packing consists of layers parallel to the ab plane formed by O-H⋯N and C-H⋯O hydrogen bonds. Between the layers, C-H⋯π inter-actions are observed.

Selected Electrochemical Properties of 4,4'-((1E,1'E)-((1,2,4-Thiadiazole-3,5-diyl)bis(azaneylylidene))bis(methaneylylidene))bis(N,N-di-p-tolylaniline) towards Perovskite Solar Cells with 14.4% Efficiency.

Planar perovskite solar cells were fabricated on F-doped SnO2 (FTO) coated glass substrates, with 4,4'-((1E,1'E)-((1,2,4-thiadiazole-3,5-diyl)bis(azaneylylidene))bis(methaneylylidene))bis(N,N-di-p-tolylaniline) (bTAThDaz) as hole transport material. This imine was synthesized in one step reaction, starting from commercially available and relatively inexpensive reagents. Electrochemical, optical, electrical, thermal and structural studies including thermal images and current-voltage measurements of the full solar cell devices characterize the imine in details. HOMO-LUMO of bTAThDaz were investigated by cyclic voltammetry (CV) and energy-resolved electrochemical impedance spectroscopy (ER-EIS) and were found at -5.19 eV and -2.52 eV (CV) and at -5.5 eV and -2.3 eV (ER-EIS). The imine exhibited 5% weight loss at 156 °C. The electrical behavior and photovoltaic performance of the perovskite solar cell was examined for FTO/TiO2/perovskite/bTAThDaz/Ag device architecture. Constructed devices exhibited good time and air stability together with quite small effect of hysteresis. The observed solar conversion efficiency was 14.4%.

Crystal structure of 1,1'-{(1E,1'E)-[4,4'-(9H-fluorene-9,9-di-yl)bis-(4,1-phenyl-ene)]bis-(aza-nylyl-idene)bis(methanylyl-idene)}bis-(naphthalen-2-ol) di-chloro-benzene monosolvate.

The bis-(anil) mol-ecule of the title compound, C47H32N2O2·C6H4Cl2, contains two anil fragments in the enol-enol form, exhibiting intra-molecular O-H⋯N hydrogen bonds. The two hy-droxy-naphthalene ring systems are approximately parallel to each other with a dihedral angle of 4.67 (8)° between them, and each ring system makes a large dihedral angle [55.11 (11) and 48.50 (10)°] with the adjacent benzene ring. In the crystal, the bis-(anil) mol-ecules form an inversion dimer by a pair of weak C-H⋯O inter-actions. The dimers arrange in a one-dimensional column along the b axis via another C-H⋯O inter-action and a π-π stacking inter-action between the hy-droxy-naphthalene ring system with a centroid-centroid distance of 3.6562 (16) Å. The solvent 1,2-di-chloro-benzene mol-ecules are located between the dimers and bind neighbouring columns by weak C-H⋯Cl inter-actions. Theoretical prediction of potential biological activities was performed, which suggested that the title anil compound can exhibit histone de-acetyl-ase SIRT2, histone de-acetyl-ase class III and histone de-acetyl-ase SIRT1 activities, and will act as inhibitor to aspulvinone di-methyl-allyl-transferase, de-hydro-l-gulonate deca-rboxylase and gluta-thione thiol-esterase.