Comparative Analysis of Selected Geostatistical Methods for Bottom Surface Modeling.

Digital bottom models are commonly used in many fields of human activity, such as navigation, harbor and offshore technologies, or environmental studies. In many cases, they are the basis for further analysis. They are prepared based on bathymetric measurements, which in many cases have the form of large datasets. Therefore, various interpolation methods are used for calculating these models. In this paper, we present the analysis in which we compared selected methods for bottom surface modeling with a particular focus on geostatistical methods. The aim was to compare five variants of Kriging and three deterministic methods. The research was performed with real data acquired with the use of an autonomous surface vehicle. The collected bathymetric data were reduced (from about 5 million points to about 500 points) and analyzed. A ranking approach was proposed to perform a complex and comprehensive analysis integrating typically used error statistics-mean absolute error, standard deviation and root mean square error. This approach allowed the inclusion of various views on methods of assessment while integrating various metrics and factors. The results show that geostatistical methods perform very well. The best results were achieved with the modifications of classical Kriging methods, which are disjunctive Kriging and empirical Bayesian Kriging. For these two methods, good statistics were calculated compared to other methods (for example, the mean absolute error for disjunctive Kriging was 0.23 m, while for universal Kriging and simple Kriging, it was 0.26 m and 0.25 m, respectively). However, it is worth mentioning that interpolation based on radial basis function in some cases is comparable to Kriging in its performance. The proposed ranking approach was proven to be useful and can be utilized in the future for choosing and comparing DBMs, mostly in mapping and analyzing seabed changes, for example in dredging operations. The research will be used during the implementation of the new multidimensional and multitemporal coastal zone monitoring system using autonomous, unmanned floating platforms. The prototype of this system is at the design stage and is expected to be implemented.

Testing the Effect of Bathymetric Data Reduction on the Shape of the Digital Bottom Model.

Depth data and the digital bottom model created from it are very important in the inland and coastal water zones studies and research. The paper undertakes the subject of bathymetric data processing using reduction methods and examines the impact of data reduction according to the resulting representations of the bottom surface in the form of numerical bottom models. Data reduction is an approach that is meant to reduce the size of the input dataset to make it easier and more efficient for analysis, transmission, storage and similar. For the purposes of this article, test datasets were created by discretizing a selected polynomial function. The real dataset, which was used to verify the analyzes, was acquired using an interferometric echosounder mounted on a HydroDron-1 autonomous survey vessel. The data were collected in the ribbon of Lake Klodno, Zawory. Data reduction was conducted in two commercial programs. Three equal reduction parameters were adopted for each algorithm. The research part of the paper presents the results of the conducted analyzes of the reduced bathymetric datasets based on the visual comparison of numerical bottom models, isobaths, and statistical parameters. The article contains tabular results with statistics, as well as the spatial visualization of the studied fragments of numerical bottom models and isobaths. This research is being used in the course of work on an innovative project that aims to develop a prototype of a multi-dimensional and multi-temporal coastal zone monitoring system using autonomous, unmanned floating platforms at a single survey pass.

AUV Navigation Correction Based on Automated Multibeam Tile Matching.

Ocean science and hydroacoustic seafloor mapping rely on accurate navigation underwater. By exploiting terrain information provided by a multibeam echosounder system, it is possible to significantly improve map quality. This article presents an algorithm capable of improving map quality and accuracy by aligning consecutive pings to tiles that are matched pairwise. A globally consistent solution is calculated from these matches. The proposed method has the potential to be used online in addition to other navigation solutions, but is mainly targeted for post processing. The algorithm was tested using different parameter settings on an AUV and a ship-based dataset. The ship-based dataset is publicly available as a benchmark. The original accurate navigation serving as a ground truth, alongside trajectories that include an artificial drift, are available. This allows quantitative comparisons between algorithms and parameter settings.

Integrating Sensors into a Marine Drone for Bathymetric 3D Surveys in Shallow Waters.

This paper demonstrates that accurate data concerning bathymetry as well as environmental conditions in shallow waters can be acquired using sensors that are integrated into the same marine vehicle. An open prototype of an unmanned surface vessel (USV) named MicroVeGA is described. The focus is on the main instruments installed on-board: a differential Global Position System (GPS) system and single beam echo sounder; inertial platform for attitude control; ultrasound obstacle-detection system with temperature control system; emerged and submerged video acquisition system. The results of two cases study are presented, both concerning areas (Sorrento Marina Grande and Marechiaro Harbour, both in the Gulf of Naples) characterized by a coastal physiography that impedes the execution of a bathymetric survey with traditional boats. In addition, those areas are critical because of the presence of submerged archaeological remains that produce rapid changes in depth values. The experiments confirm that the integration of the sensors improves the instruments' performance and survey accuracy.