TLC and HPTLC-APCI-MS for the rapid discrimination of plant resins frequently used for lacquers and varnishes by artists and conservators.

INTRODUCTION: Depending on their terpenoid and phenolic constituents plant resins can be classified as diterpenoid, triterpenoid or phenolic resins; thereby the profile of diterpenes and triterpenes is considered as genus- or even species-specific. OBJECTIVES: We aimed to develop a simple, rapid, inexpensive, sensitive and specific method for the identification of resin-specific triterpenoid and phenolic compounds in plant resins using (HP)TLC [(high-performance) thin-layer chromatography] combined with APCI-MS (atmospheric pressure chemical ionisation mass spectrometry) and post-chromatographic detection reactions. METHODS: Twenty resin samples from different plant species were analysed. Different extraction procedures, post-chromatographic detection reagents as well as various sorbents and solvents for planar chromatography were tested. To evaluate the potential of the optimised (HP)TLC-APCI-MS methods, parameter such as limit of detection (LOD) was determined for selected marker compounds. RESULTS: Our protocol enabled qualitative analyses of chemotaxonomic molecular markers in natural resins such as dammar, mastic, olibanum and benzoin. For the first time, the application of thionyl chloride-stannic chloride reagent for a specific post-chromatographic detection of triterpenes is reported, sometimes even allowing discrimination between isomers based on their characteristic colour sequences. For triterpene acids, triterpene alcohols and phenolic compounds, detection limits of 2-20 ng/TLC zone and a system precision with a relative standard deviation (RSD) in the range of 3.9%-7.0% were achieved by (HP)TLC-APCI-MS. The applicability of the method for the analysis of resin-based varnishes was successfully tested on a mastic-based varnish. Thus, the method we propose is a helpful tool for the discrimination of resins and resin-based varnishes with respect to their botanical origin.

Impact of Backbone Substitution on Organocatalytic Activity of Sterically Encumbered NHC in Benzoin Condensation.

In this study, we provide a theoretical explanation for the experimentally observed decrease in the organocatalytic activity of N-aryl imidazolylidenes methylated at the C4/5-H positions in the benzoin condensation of aromatic aldehydes. A comparative quantum chemical study of energy profiles for the NHC-mediated benzoin condensation of furfural has revealed a high energy barrier to the formation of the IPrMe-based furanic Breslow intermediate that can be attributed to the negative steric interactions between the imidazole backbone methyl groups and N-aryl substituents.

Identification of kibdelomycin and related biosynthetic gene clusters and characterization of the C-branching of amycolose.

Many bacterial natural products contain C-branched sugars, including components from the outer cell wall or antibiotically active metabolites. The enzymatic C-branching of keto sugars leading to longer side chains (≥C2), is catalyzed by thiamine diphosphate (ThDP)-dependent enzymes. Chiral tertiary α-hydroxy ketones are formed in this process. The ThDP enzymes that catalyze C-branching reactions belong to one of three enzymatic superfamilies: decarboxy-lases, transketolases, and α-ketoacid dehydrogenases 2, but branching of keto sugars has only been demonstrated for decarboxylases. In this study, we showed that an α-ketoacid dehydrogenase is responsible for C-branching of the deoxyketo sugar amycolose in the biosynthesis of kibdelomycin in Kibdelosporangium sp. MA7385. In addition, we characterized an amino transferase in the same biosynthetic gene cluster (BGC) that accepts a sterically demanding tertiary α-hydroxy ketone in a downstream reaction. Subsequently, we identified approximately 400 similar BGCs in silico, suggesting that there is a large diversity of possible ThDP-dependent enzymes catalyzing the C-branching of keto sugars and subsequent modifications.

The importance of four-membered NHCs in stabilizing Breslow intermediates on benzoin condensation pathway.

N-heterocyclic carbenes (NHCs) have been established to be effective organocatalysts for facilitating the benzoin condensation and many other reactions. These reactions involve the formation of a Breslow intermediate (BI), which exhibits umpolung chemistry. To facilitate organocatalysis, several new cyclic carbenes are being introduced, four-membered NHCs are of special interest. Whether these NHCs can exhibit catalytic influence or not, can be evaluated by exploring the potential energy surface (PES) of the benzoin condensation reaction. Quantum chemical analysis has been carried out to compare the PES of these four-membered NHCs with that of standard five-membered NHCs to explore their catalytic ability. The barrier for the first step of the reaction for the formation of BI is comparable in all the cases. But the barrier for the second step of the reaction leading to the benzoin formation from BI is estimated to be very high for the four membered NHCs. These results indicate that the probability of identifying and isolating the BI is very high in comparison to the completion of benzoin condensation reaction in the case of the four-membered NHCs.

Remote Electronic Effect of Chiral N-Heterocyclic Carbene Catalyst on an Asymmetric Benzoin Reaction.

A remote electronic effect of chiral aminoindanol-derived N-heterocyclic carbene catalyst on an asymmetric benzoin reaction was investigated. The catalyst bearing remote electron-withdrawing substituents increased enantioselectivity of the reaction at the cost of the reaction rate. DFT calculations rationalized the increased enantioselectivity.

Catalytic Oxidation of Benzoins by Hydrogen Peroxide on Nanosized HKUST-1: Influence of Substituents on the Reaction Rates and DFT Modeling of the Reaction Path.

In this research, the oxidation of a series of benzoins, R-C(=O)-CH(OH)-R, where R = phenyl, 4-methoxyphenyl, 4-bromophenyl, and 2-naphthyl, by hydrogen peroxide in the presence of nanostructured HKUST-1 (suspension in acetonitrile/water mixture) was studied. The respective benzoic acids were the only products of the reactions. The initial average reaction rates were experimentally determined at different concentrations of benzoin, H2O2 and an effective concentration of HKUST-1. The sorption of the isotherms of benzoin, dimethoxybenzoin and benzoic acid on HKUST-1, as well as their sorption kinetic curves, were measured. The increase in H2O2 concentration expectedly led to an acceleration of the reaction. The dependencies of the benzoin oxidation rates on the concentrations of both benzoin and HKUST-1 passed through the maxima. This finding could be explained by a counterplay between the increasing reaction rate and increasing benzoin sorption on the catalyst with the increase in the concentration. The electronic effect of the substituent in benzoin had a significant influence on the reaction rate, while no relation between the size of the substrate molecule and the rate of its oxidation was found. It was confirmed by DFT modeling that the reaction could pass through the Baeyer-Villiger mechanism, involving an attack by the HOO- anion on the C atom of the activated C=O group.

Influence of Pore Size in Benzoin Condensation of Furfural Using Heterogenized Benzimidazole Organocatalysts.

A designed N-heterocyclic carbene (NHC) catalyst was covalently anchored on a range of mesoporous and hierarchical supports, to study the influence of pore size in the benzoin condensation of furfural. The structural and spectroscopic characteristics of the anchored catalysts were investigated, also with the help of molecular dynamics simulations, in order to rationalize the degree of stability and recyclability of the heterogenized organocatalysts. Quantitative yields (99 %) and complete recyclability were maintained after several cycles, vindicating the design rationale.

3,3',5,5'-Tetramethoxybenzoin: a forgotten photolabile protecting group.

Although reported several decades ago, 3,3',5,5'-tetramethoxybenzoin esters have not been used as a common photolabile protecting group, contrary to their unsymmetrical 3',5'-dimethoxybenzoin analogues. While the properties of the latter are superior, their tedious synthesis and chemical instability represent a drawback. In this article, we describe a reliable synthetic access to the symmetrical tetramethoxybenzoin derivatives, and show that their photochemical behaviour remain interesting, in particular chromatically orthogonality with respect to nitroveratryl esters.

Synthesis, Characterization, and Catalytic Exploration of Mononuclear Mo(VI) Dioxido Complexes of (Z)-1-R-2-(4',4'-Dimethyl-2'-oxazolin-2'-yl)-eth-1-en-1-ates.

The coordination chemistry of the title ligands with Mo metal centers was investigated. Thus, the synthesis and characterization (NMR, X-ray diffraction) of four mononuclear formally Mo(6+) complexes of (Z)-1-R-2-(4',4'-dimethyl-2'-oxazolin-2'-yl)-eth-1-en-1-ates (L: R = -Ph, -Ph-p-NO2, -Ph-p-OMe and -t-Bu), derived from the part enols (LH), is described. The resulting air-stable MoO2L2 complexes (1-4) exist, as shown by single-crystal X-ray diffraction experiments, in the cis-dioxido-trans(N)-κ2-N,O-L conformation in the solid state for all four examples. This situation was further probed using semi-empirical PM6(tm) calculations. Complexes 1-4 represent the first Mo complexes of this ligand class and, indeed, of Group 6 metals in general. Structural and spectroscopic comparisons were made between these and related Mo(6+) compounds. Complex 1 (R = -Ph) was studied for its ability to selectively catalyze the production of poly-norbornene from the monomer in the presence of MAO. This, unfortunately, only resulted in the synthesis of insoluble, presumably highly cross-linked, polymeric and/or oligomeric materials. However, complexes 1-4 were demonstrated to be highly effective for catalyzing benzoin to benzil conversion using DMSO as the O-transfer agent. This catalysis work is likewise put into perspective with respect to analogous Mo(6+) complexes.

Carbene-Catalyzed Activation of C-Si Bonds for Chemo- and Enantioselective Cross Brook-Benzoin Reaction.

The first carbene-catalyzed asymmetric chemoselective cross silyl benzoin (Brook-Benzoin) reaction has been developed. Key steps of this reaction involve activation of the carbon-silicon bond of an acylsilane by a chiral N-heterocyclic carbene (NHC) catalyst to form a silyl acyl anion intermediate. These acyl anions then undergo an addition reaction with indole aldehydes in a highly chemo- and enantioselective manner to afford α-silyloxy ketones with excellent optical purities. The reaction mechanism of this cross Brook-Benzoin reaction was investigated through both experimental and computational methods. The chiral α-hydroxy ketone derivatives obtained by this approach show promising, agrochemically interesting activity against harmful plant bacteria.

Synthesis, biological evaluation (antioxidant, antimicrobial, enzyme inhibition, and cytotoxic) and molecular docking study of hydroxy methoxy benzoin/benzil analogous.

In this work, due to the biological activity evaluation, a series of hydroxy methoxy benzoins (1-8), benzils (10-16) and methoxy benzoin/benzil-O-ß-d-glucosides (17-28) were synthesized. Antioxidant (FRAP, CUPRAC, DPPH), antimicrobial (16 microorganisms, and two yeast), enzyme inhibition (α-amylase, α-glucosidase, AChE, BChE, and tyrosinase) of all synthesized benzoin/benzil analogs were investigated. Benzoins (1-8) showed the most effective antioxidant properties compared to all three methods. Compound 28 against α-amylase, compound 9 against α-glucosidase, compound 11 against AChE, compound 2 against BChE, and compound 13 against tyrosinase showed the best activities with the better or similar IC50 values as used standards. Hydroxy methoxy benzoin compounds (1-8) among all four groups were seen as the most effective against the tested microorganism. Molecular docking analysis showed that all tested compounds 1-28 (0.01-2.22 µM) had the best binding affinity against AChE enzyme. Cytotoxic effects of the many of compounds (1-16, 21, and 24) also investigated and it was found that they caused different effects in different cells. The LDH tests of compounds 1a + b, 4, 7, 8, 9, 11, 12, 21, and 24, seemed to be effective compared to the positive control cisplatin. The cytotoxicity of compounds 6 (9.24%) for MCF7 cancer cells, 8 (5.16%) and 4 (8.26%) for HT29 cancer cells, 24 (9.84%) for Hep3B cells and 8 (8.52%), 7 (5.70%), 4 (6.94) and 9 (7.22%) for C6 cells were at normal values. And also cytotoxic activity of four compounds (5, 9, 21, and 24) among the all synthetic groups, were evaluated to the HeLa and RPE. Compound 5 showed anticancer activity on HeLa and RPE cancer cells as much as or better than cisplatin which was used as standard.

Palladium-Catalyzed Enantioselective Decarboxylative Allylic Alkylation of Protected Benzoin-Derived Enol Carbonates.

The enantioselective palladium-catalyzed decarboxylative allylic alkylation of fully substituted α-hydroxy acyclic enol carbonates providing tetrasubstituted benzoin derivatives is reported. Investigation into the transformation revealed that preparation of the starting material as a single enolate isomer is crucial for optimal enantioselectivity. The obtained alkylation products contain multiple reactive sites that can be utilized toward the synthesis of stereochemically rich derivatives. COMMUNICATION.

Photochemical α-Cleavage Reaction of 3',5'-Dimethoxybenzoin: A Combined Time-Resolved Spectroscopy and Computational Chemistry Study.

Benzoin is one of the most commonly used photoinitiators to induce free radical polymerization. Here, improved benzoin properties could be accomplished by the introduction of two methoxy substituents, leading to the formation of 3',5'-dimethoxybenzoin (DMB) which has a higher photo-cleavage quantum yield (0.54) than benzoin (0.35). To elucidate the underlying reaction mechanisms of DMB and obtain direct information of the transient species involved, femtosecond transient absorption (fs-TA) and nanosecond transient absorption (ns-TA) spectroscopic experiments in conjunction with density functional theory/time-dependent density functional theory (DFT/TD-DFT) calculations were performed. It was found that the photo-induced α-cleavage (Norrish Type I reaction) of DMB occurred from the nπ* triplet state after a rapid intersystem crossing (ISC) process (7.6 ps), leading to the generation of phenyl radicals on the picosecond time scale. Compared with Benzoin, DMB possesses two methoxy groups which are able to stabilize the alcohol radical and thus result in a stronger driving force for cleavage and a higher quantum yield of photodissociation. Two stable conformations (cis-DMB and trans-DMB) at ground state were found via DFT calculations. The influence of the intramolecular hydrogen bond on the α-cleavage of DMB was elaborated.

Biotransformation of benzoin by Sphingomonas sp. LK11 and ameliorative effects on growth of Cucumis sativus.

Plant endophytes play vital role in plant growth promotion as well as in abiotic and biotic stress tolerance. They also mediate biotransformation of complex organic materials to simpler and useful by-product. Therefore, the role of plant endophyte in plant growth promotion and stress tolerance has gained considerable attention in recent days. Sphingomonas sp. LK11 is an important plant endophyte that actively regulates plant growth. However, the biotransformation and stress tolerance potential of Sphingomonas sp. LK11 was yet to be elucidated. Therefore, we studied the biotransformation of benzoin by Sphingomonas sp. LK11. We found that, Sphingomonans sp. LK11 biotransformed benzoin to benzamide. Further application of benzamide to Cucumis sativus led to decrease in agronomic potential of C. sativus as benzamide acts as an abiotic stress agent. However, the application of Sphingomonas sp. LK11 inoculums with benzamide reverted back the agronomic trait of the plants, suggesting the role of Sphingomonas sp. LK11 in biotransformation and abiotic stress tolerance in plants.

Imidazolium-Catalyzed Synthesis of an Imidazolium Catalyst.

The chemistry of imidazolium-catalyzed imidazolium synthesis was studied as part of an effort to develop a plausible prebiotic synthesis of a small catalytic molecule capable of catalyzing its own synthesis. Specifically, we investigated the one-pot 1-ethyl-3-methylimidazolium acetate (EMIM-Ac) catalyzed synthesis of 1,3-dibutyl-4,5-difuryl-imidazolium acetate (DBDFIM-Ac) from furfural, n-butylamine, formaldehyde, and acetic acid at 80 °C. Liu et al. (2012) had previously demonstrated the first reaction of the synthetic process, the EMIM-Ac catalyzed benzoin condensation of furfural that yields furoin. Our early studies established the second reaction of the synthetic process, the multicomponent reaction of furoin, n-butylamine, formaldehyde, and acetic acid that yields the imidazolium salt, DBDFIM-Ac. Studies of the complete two-reaction process that uses furfural for the synthesis of DBDFIM-Ac showed that the highest yield of DBDFIM-Ac was obtained when the mole ratio of n-butylamine, formaldehyde, and acetic acid relative to furfural was respectively (0.5:0.25:0.25:1.0-furfural), or one-half of the stoichiometric ratio (1.0:0.5:0.5:1.0-furfural). A time course study of the process showed transient formation of furoin, the obligatory reaction intermediate. DBDFIM-Ac and the imidazolium side product, 1,3-dibutyl-4,5-trifuryl-imidazolium acetate (DBTFIM-Ac), were stable under the reaction conditions. Imidazolium products (DBDFIM and DBTFIM) and the furoin intermediate were not formed in control reactions (80 °C, 24 h) in which EMIM catalyst was either absent or replaced with an equal volume of acetonitrile or DMF. The imidazolium product, DBDFIM-Ac, was shown to catalyze the synthesis of structurally similar 1,3-dipentyl-4,5-difuryl-imidazolium acetate (DPDFIM-Ac) from furfural, n-pentylamine, formaldehyde, and acetic acid at 80 °C.

Cu(II)-Catalyzed C-N Coupling of (Hetero)aryl Halides and N-Nucleophiles Promoted by α-Benzoin Oxime.

We first reported the new application of a translate metal chelating ligand α-benzoin oxime for improving Cu-catalyzed C-N coupling reactions. The system could catalyse coupling reactions of (hetero)aryl halides with a wide of nucleophiles (e.g., azoles, piperidine, pyrrolidine and amino acids) in moderate to excellent yields. The protocol allows rapid access to the most common scaffolds found in FDA-approved pharmaceuticals.

Robust Organocatalysts for the Cleavage of Vegetable Oil Derivatives to Aldehydes through Retrobenzoin Condensation.

A series of thiazolium salts was prepared and tested for the cleavage of the α-hydroxyketone derived from methyl oleate. The robustness of these precatalysts was determined by dynamic thermogravimetric analyses (TGA). It has been shown that the stability of these species is mainly governed by the nature of the counter-anion and some of them were found to be stable until 350-400 °C. The α-hydroxyketone derived from methyl oleate was cleaved under reactive distillation conditions using optimized, thermally robust N-butylthiazolium triflate to give the cleavage product, namely, nonanal and methyl azelaaldehydate, with 85 and 70 % yields. A range of α-hydroxyketones derived from several fatty acids was cleaved to give the corresponding bio-based aldehydes with up to 98 % isolated yields. Finally, this protocol was successfully applied to a high-oleic sunflower oil derivative.

One-pot two-step facile synthesis of 2,3,4,5-tetra substituted dihydrooxazoles and their antimicrobial activity.

New 2,3,4,5-tetra substituted dihydrooxazoles derivatives were efficiently synthesized starting from benzaldehyde, aryl thiosemicarbazide and benzoin using designed synthetic route. Newly synthesized 2,3,4,5-tetra substituted dihydrooxazole derivatives were screened for their antibacterial and antifungal activities against different strains of pathogenic bacteria and fungi. The minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC) and minimum fungicidal concentration (MFC) were determined for the test compounds using positive and negative control. Compounds 4b, 4d, 4f, 4i, 4k and 4m, have shown good antibacterial activity whereas compounds 4e, 4g, 4h, 4j, 4l and 4n have displayed better antifungal activity.

Antibacterial, anti-biofilm and anticancer potentials of green synthesized silver nanoparticles using benzoin gum (Styrax benzoin) extract.

This study described a simple and green approach for the synthesis of silver nanoparticles (AgNPs) employing benzoin gum water extract as a reducing and capping agent and their applications. The AgNPs were characterized by ultraviolet-visible spectrophotometer, X-ray diffraction pattern, field emission transmission electron microscopy, dynamic light scattering, zeta potential and fourier transform infrared spectroscopy. The AgNPs showed promising antimicrobial activity against various pathogens (Gram-negative, Gram-positive and fungus) and possessed high free radical scavenging activity (104.5 ± 7.21 % at 1 mg/ml). In addition, the AgNPs exhibited strong cytotoxicity towards human cervical cancer and human lung cancer cells as compared to the normal mouse macrophage cells. Moreover, the AgNPs possessed anti-biofilm activity against Escherichia coli, and compatibility to human keratinocyte HaCaT cells, which suggests the use of dressing with the AgNPs in chronic wound treatment. Therefore, AgNPs synthesized by benzoin gum extract are comparatively green and may have broad spectrum potential application in biomedicine.

Self-Supported N-Heterocyclic Carbenes and Their Use as Organocatalysts.

The study of N-heterocyclic carbenes (NHCs) as organocatalysts has proliferated in recent years, and they have been found to be useful in a variety of reactions. In an attempt to further expand their utility and to study their recyclability, we designed and synthesized a series of self-supported NHCs in which the catalytic carbene groups form part of a densely functionalized polymer backbone, and studied them as organocatalysts. Of the self-Supported NHCs examined, a benzimidazole derived polymer with flexible linkers connecting the catalytic groups was found to be the most efficient organocatalyst in a model benzoin condensation reaction, and thus it was used in a variety of such reactions, including some involving catalyst recycling. Furthermore, it was also used to catalyze a set of redox esterification reactions involving conjugated unsaturated aldehydes. In all of these reactions the catalyst afforded good yield of the desired product and its polymeric nature facilitated product purification.