Waste Valorization in a Sustainable Bio-Based Economy: The Road to Carbon Neutrality.

The development of sustainable chemistry underlying the quest to minimize and/or valorize waste in the carbon-neutral manufacture of chemicals is followed over the last four to five decades. Both chemo- and biocatalysis have played an indispensable role in this odyssey. in particular developments in protein engineering, metagenomics and bioinformatics over the preceding three decades have played a crucial supporting role in facilitating the widespread application of both whole cell and cell-free biocatalysis. The pressing need, driven by climate change mitigation, for a drastic reduction in greenhouse gas (GHG) emissions, has precipitated an energy transition based on decarbonization of energy and defossilization of organic chemicals production. The latter involves waste biomass and/or waste CO2 as the feedstock and green electricity generated using solar, wind, hydroelectric or nuclear energy. The use of waste polysaccharides as feedstocks will underpin a renaissance in carbohydrate chemistry with pentoses and hexoses as base chemicals and bio-based solvents and polymers as environmentally friendly downstream products. The widespread availability of inexpensive electricity and solar energy has led to increasing attention for electro(bio)catalysis and photo(bio)catalysis which in turn is leading to myriad innovations in these fields.

Advanced tools for molecular characterization of bio-based and biodegradable polymers.

Bio-based and biodegradable materials play a vital role in a sustainable and green economy. These materials must exhibit properties that are similar to or better than the properties of oil- or coal-based materials and require sophisticated synthesis technologies and detailed knowledge of structure-property correlations. For comprehensive molecular structure elucidation, advanced analytical methods, including coupled and hyphenated techniques that combine advanced fractionation and information-rich spectroscopic detectors, are an indispensable tool. One important tool for fractionating complex polymers regarding molecular size is size exclusion chromatography. For fractionating polymers with regard to chemical composition, solvent (or temperature) gradient HPLC has been developed. The combination of different liquid chromatography methods in comprehensive two-dimensional HPLC setups is another important tool. Today, a toolbox of HPLC methods is in place that enables the fractionation of complex bio-based and biodegradable polymers according to the most important molecular parameters including molecular size, composition, functionality, and branching. Here, an overview of the different techniques and some major applications is presented. Some representative developments in the field are discussed, and different techniques, experimental protocols, and applications are highlighted.

Synthesis of Amino Acid-Based Aromatic Poly(Ester Urea)s Using 4-Hydroxycinnamic Acid-Derived Diols.

Amino acid-based poly(ester urea)s are an attractive class of polymers that are of interest for a variety of biomedical applications. Generally, amino acid-based poly(ester urea)s are prepared by polymerization of diamines, which are obtained from the corresponding amino acids and aliphatic diols. This article presents an alternative synthetic strategy that uses diamine monomers obtained from aromatic, 4-hydroxycinnamic acid-derived diols. A library of structurally related diamine monomers has been prepared by coupling l-leucine to 4-hydroxycinnamic acid-based diols that incorporate alkyl spacers of different lengths. The exploration of 4-hydroxycinnamic acid as a building block is interesting as it can be obtained from various biological resources, such as for example lignin, and thus provides an opportunity to take advantage of (under-utilized) bio-based renewables for the design of new polymer materials. These diamine monomers can be copolymerized in a solvent-free, one-pot, two-step process using dimethyl carbonate as an environmentally sustainable reagent to afford amino acid-based aromatic poly(ester urea) homo- and copolymers with thermal properties that can be tuned by varying the chemical structure of the diamine monomer, or via copolymerization of two different monomers.

Bio-based polyester-polyurethane foams: synthesis and degradability by Aspergillus niger and Aspergillus clavatus.

In this article, the degradability by Aspergillus niger and Aspergillus clavatus of three bio-based polyurethane (PU) foams is compared to previous degradability studies involving a Pseudomonas sp. bacterium and similar initial materials (Spontón et al. in Int. Biodet. Biodeg. 85:85-94, 2013, https://doi.org/10.1016/j.ibiod.2013.05.019 ). First, three new polyester-polyurethane foams were prepared from mixtures of castor oil (CO), maleated castor oil (MACO), toluene diisocyanate (TDI), and water. Then, their degradation tests were carried out in an aqueous medium, and employing the two mentioned fungi, after their isolation from the environment. From the degradation tests, the following was observed: (a) the insoluble (and slightly collapsed) foams exhibited free hydroxyl, carboxyl, and amine moieties; and (b) the water soluble (and low molar mass) compounds contained amines, carboxylic acids, and glycerol. The most degraded foam contained the highest amount of MACO, and therefore the highest concentration of hydrolytic bonds. A basic biodegradation mechanism was proposed that involves hydrolysis and oxidation reactions.

Hibiscus Sabdariffa L. Extract as a Natural Additive in Food Packaging Biodegradable Films to Improve Antioxidant, Antimicrobial, and Physicochemical Properties.

In this study, biodegradable active films were prepared from potato starch and polyvinyl alcohol at different proportions, mixed with acetone extract of Hibiscus sabdariffa L. (HS) and using glycerol as a plasticizer. Functional properties, antimicrobial, and antioxidant capacity were evaluated. Potato starch films with a proportion of polyvinyl alcohol up to 50% and HS extract had significant antioxidant capacity and antibacterial effect against most of the analyzed strains. Adding polyvinyl alcohol (PVOH) and HS extract improved the mechanical performance and reduced water vapor permeability of the materials. The active biobased films with HS extract presented good physicochemical, antimicrobial, and antioxidant properties. These materials are considered as suitable for food packaging, and the active compounds in the roselle extract are a natural antibacterial option for the food area. The materials based entirely on biodegradable products are an excellent alternative when developing and marketing biobased materials, minimizing the environmental impact of food packaging.

An Expedient Route to Bio-based Polyacrylate Alternatives with Inherent Degradation Capabilities by Organic Catalysis for Polymerization of Muconate Esters.

The quest for polymers that would be at the same time bio-based and degradable after usage, in addition to offering chemical post-modification options, remains a daunting challenge in contemporary polymer science. Despite advances in polymer chemistry, attempts at controlling the chain-growth polymerization of muconate esters remain unexplored. Here we show that dialkyl muconates can be rapidly polymerized by organocatalyzed group transfer polymerization (O-GTP). O-GTP is conducted to completion at room temperature in toluene within a few minutes, using 1-ethoxy-1-(trimethylsiloxy)-1,3-butadiene (ETSB) as initiator and 1-tert-butyl-4,4,4-tris(dimethylamino)-2,2-bis[tris(dimethylamino)-phosphoranylidenamino]-25,45 catenadi(phosphazene) (P4-t--Bu) as catalyst. Chain extension experiments and synthesis of all muconate-type block copolymers can also be achieved. Furthermore, polymuconates are amenable to facile post-polymerization modification reactions. This is showcased through the hydrolysis of the ester side chains leading to well-defined poly(muconic acid), and by epoxidation of the C=C double bonds of the main chain. Last but not least, these internal alkene groups can be selectively cleaved by ozonolysis, demonstrating the upcyclability of polymuconates under oxidative conditions. This work demonstrates that polymuconates constitute a unique platform of bio-based polymers, easily modifiable in addition to being chemically degradable under user friendly experimental conditions.

Poly(lactic acid) based Pearl Layer Moistureproof Membrane for Flexible Laminated Packaging.

The development of bio-based polymer materials, such as polylactic acid (PLA) -based polymers, is an effective strategy to reduce dependence on petrochemical-based polymers. However, the preparation of bio-based polymers with high barrier properties is a major challenge. To overcome this challenge, a nacreous layer structure with a ' brick and mud ' pattern is mimicked to improve the overall performance of the material. In this paper, Poly (L -lactic acid) (PLLA) and Polypropylene Glycol (PPG) was combined to prepare bio-based polyurethane (PU-PLLA), which is used as the slurry structure of nacreous layer. The bio-based biomimetic composite membrane (PU-PLLA/BN) is then obtained by adding boron nitride (BN, brick structure of pearl layer) to it. The water vapor permeability test results show that the permeability of PU-PLLA material can be reduced by more than 50% by 5 wt.% BN, which is because the addition of BN can increase the length and tortuosity of the gas molecular diffusion path in the composite. Therefore, this pearl-inspired PU-PLLA/BN film has excellent moisture resistance, which opens up a broad road for the practical application of PLLA in flexible laminated packaging.

Hytrel-like Copolymers Based on Furan Polyester: The Effect of Poly(Butylene Furanoate) Segment on Microstructure and Mechanical/Elastic Performance.

This paper aims to compare the performance of two Hytrel-like segmented copolymers: "classic" PBT-b-PTMG and fully bio-based PBF-b-PTMG, containing poly(butylene furanoate) as the rigid segment. The idea behind this research is to assess whether the sustainable copolymers can successfully replace those "classic" once at the thermoplastic elastomers' market. Two series of copolymers were synthesized under the same process parameters, had the same compositions, but differed in aromatic ring structure in terephthalate/furanoate unit. Furthermore, the materials were processed by injection moulding as typical Hytrel products. Then, the samples were subjected to extensive characterisation including NMR, GPC, FTIR, DSC, WAXS, DMTA, TGA techniques and mechanical tests with particular interest in the microstructure formed during processing and its effect on the copolymers' mechanical and elastic behaviour. The detailed analysis proved that PBF-b-PTMG and PBT-b-PTMG copolymers represent two kinds of materials with similar chemical structure, some features of thermoplastic elastomers, but evident differences in their physical properties.

Thermal Stability of Bio-Based Aliphatic-Semiaromatic Copolyester for Melt-Spun Fibers with Excellent Mechanical Properties.

Flexible aliphatic poly(lactic acid) is introduced into polyethylene terephthalate through copolymerization to prepare biodegradable copolyester, which aims to solve the non-degradability of polyethylene terephthalate (PET) and realize the greening of raw materials. In this work, poly(ethylene terephthalate-co-lactic acid) random copolyesters (PETLAs) of lactic acid composition from 10 to 50% is synthesized via one-pot method. The chemical structure and composition, thermal property, and crystallization property of prepared PETLAs resin are characterized. The results shows that the introduction of LA segment forms random copolyester, and the flexible LA segment results in slight decrease in the glass transition temperatures (Tg ), melting point (Tm ), and crystallinity (Xc ) of the copolyesters. The thermal stability of PETLAs is better, and the initial decomposition temperature of PETLA-10 can reach 394 °C. The PETLAs resin exhibits good processability, and PETLAs fibers are prepared by melt spinning. The strength of PETLA-10 fiber can reach 260 MPa after drawing treatment, and the elongation at break can reach 130%. Taking advantage of their features, PETLAs as an innovative bio-based polymer are expected to achieve ecofriendly applications in the fields of fiber, plastic, and film.

Thermal, Mechanical, and Rheological Properties of Biocomposites Made of Poly(lactic acid) and Potato Pulp Powder.

The thermal, mechanical, and rheological properties of biocomposites of poly(lactic acid) (PLA) with potato pulp powder were investigated in order to (1) quantify how the addition of this filler modifies the structure of the polymeric material and (2) to obtain information on the possible miscibility and compatibility between PLA and the potato pulp. The potato pulp powder utilized is a residue of the processing for the production and extraction of starch. The study was conducted by analyzing the effect of the potato pulp concentration on the thermal, mechanical, and rheological properties of the biocomposites. The results showed that the potato pulp powder does not act as reinforcement but as filler for the PLA polymeric matrix. A progressive decrease in elastic modulus, tensile strength, and elongation at break was observed with increasing the potato pulp percentage. This moderate loss of mechanical properties, however, still meets the technical requirements indicated for the production of rigid packaging items. The incorporation of potato pulp powder to PLA offers the possibility to reduce the cost of the final products and promotes a circular economy approach for the valorization of agro-food waste biomass.

Thermal Decomposition Kinetics and Mechanism of In-Situ Prepared Bio-based Poly(propylene 2,5-furan dicarboxylate)/Graphene Nanocomposites.

Bio-based polyesters are a new class of materials that are expected to replace their fossil-based homologues in the near future. In this work, poly(propylene 2,5-furandicarboxylate) (PPF) nanocomposites with graphene nanoplatelets were prepared via the in-situ melt polycondensation method. The chemical structure of the resulting polymers was confirmed by 1H-NMR spectroscopy. Thermal stability, decomposition kinetics and the decomposition mechanism of the PPF nanocomposites were studied in detail. According to thermogravimetric analysis results, graphene nanoplatelets did nοt affect the thermal stability of PPF at levels of 0.5, 1.0 and 2.5 wt.%, but caused a slight increase in the activation energy values. Pyrolysis combined with gas chromatography and mass spectroscopy revealed that the decomposition mechanism of the polymer was not altered by the presence of graphene nanoplatelets but the extent of secondary homolytic degradation reactions was increased.

Synthesis of Poly(vitamin C) through ADMET.

l-Ascorbic acid, commonly known as vitamin C and one of the most important biological compounds, is converted to a α,ω-diene monomer and subsequently polymerized for the first time by acyclic diene metathesis. Various experimental conditions such as polymerization medium, catalyst type, temperature, and monomer/catalyst ratio are studied. The moderate molecular weight polymers are achieved when the polymerizations are conducted under bulk conditions employing the Grubbs first generation (G1) or Hoveyda-Grubbs second generation catalyst (HG-2). In the solution case, on the other hand, low molecular weight polymers are obtained regardless of the catalyst type. Moreover, when the catalyst performances are compared, it is found that G1 produces the higher molecular weight as well as higher yield polymers with respect to the HG-2.

Cascade use indicators for selected biopolymers: Are we aiming for the right solutions in the design for recycling of bio-based polymers?

When surveying the trends and criteria for the design for recycling (DfR) of bio-based polymers, priorities appear to lie in energy recovery at the end of the product life of durable products, such as bio-based thermosets. Non-durable products made of thermoplastic polymers exhibit good properties for material recycling. The latter commonly enjoy growing material recycling quotas in countries that enforce a landfill ban. Quantitative and qualitative indicators are needed for characterizing progress in the development towards more recycling friendly bio-based polymers. This would enable the deficits in recycling bio-based plastics to be tracked and improved. The aim of this paper is to analyse the trends in the DfR of bio-based polymers and the constraints posed by the recycling infrastructure on plastic polymers from a systems perspective. This analysis produces recommendations on how life cycle assessment indicators can be introduced into the dialogue between designers and recyclers in order to promote DfR principles to enhance the cascading use of bio-based polymers within the bioeconomy, and to meet circular economy goals.

On the Effect of Microwave Energy on Lipase-Catalyzed Polycondensation Reactions.

Microwave energy (MWe) is, nowadays, widely used as a clean synthesis tool to improve several chemical reactions, such as drug molecule synthesis, carbohydrate conversion and biomass pyrolysis. On the other hand, its exploitation in enzymatic reactions has only been fleetingly investigated and, hence, further study of MWe is required to reach a precise understanding of its potential in this field. Starting from the authors' experience in clean synthesis and biocatalyzed reactions, this study sheds light on the possibility of using MWe for enhancing enzyme-catalyzed polycondensation reactions and pre-polymer formation. Several systems and set ups were investigated involving bulk and organic media (solution phase) reactions, different enzymatic preparations and various starting bio-based monomers. Results show that MWe enables the biocatalyzed synthesis of polyesters and pre-polymers in a similar way to that reported using conventional heating with an oil bath, but in a few cases, notably bulk phase polycondensations under intense microwave irradiation, MWe leads to a rapid enzyme deactivation.

Combining Metabolic Engineering and Electrocatalysis: Application to the Production of Polyamides from Sugar.

Biorefineries aim to convert biomass into a spectrum of products ranging from biofuels to specialty chemicals. To achieve economically sustainable conversion, it is crucial to streamline the catalytic and downstream processing steps. In this work, a route that combines bio- and electrocatalysis to convert glucose into bio-based unsaturated nylon-6,6 is reported. An engineered strain of Saccharomyces cerevisiae was used as the initial biocatalyst for the conversion of glucose into muconic acid, with the highest reported muconic acid titer of 559.5 mg L(-1) in yeast. Without any separation, muconic acid was further electrocatalytically hydrogenated to 3-hexenedioic acid in 94 % yield despite the presence of biogenic impurities. Bio-based unsaturated nylon-6,6 (unsaturated polyamide-6,6) was finally obtained by polymerization of 3-hexenedioic acid with hexamethylenediamine.

Furandicarboxylate Polyesters: A Comprehensive ADMET Study of a Novel Class of Furan-Based α,ω-Diene Monomers.

The present research article delves into the preparation of a new class of bio-based polyesters from α,ω-diene furandicarboxylate monomers. In particular, it exploits the use of acyclic diene metathesis polymerisation (ADMET) on 2,5-furandicarboxylic acid (FDCA)-derived compounds. First, a library of furan-based α,ω-diene monomers was prepared via acid- or base-catalyzed transesterification of 2,5-furandicarboxylic acid dimethyl ester (FDME) with commercially available alcohols incorporating terminal olefins, i. e., allyl alcohol, but-3-en-1-ol, hex-5-en-1-ol and dec-9-en-1-ol. Then, the novel monomers were subjected to ADMET polymerisation employing different catalysts and reaction conditions. Interestingly, first-generation Grubbs catalyst was found to be the best promoter for ADMET polymerisation. This catalyst allowed the preparation of a new family of bio-based polyesters with molecular weights up to 26.4 kDa, with good thermal stability, and adaptable cis-trans conformations. Results also revealed that the monomer structure had a direct impact on the polymerisation efficiency and the resulting thermal properties. The effect of green bio-based solvents such as Cyrene™, dimethyl isosorbide (DMI) and γ-valerolactone (GVL) on the polymerisation process was also studied. Data collected showed that the solvent concentration influenced both the yield and length of polymers formed. Furthermore, some co-polymerisation experiments were conducted; the successful integration of different monomers in the resulting copolymer was shown to affect the glass transition temperature (Tg) of the resulting materials.

Z-scheme heterojunction g-C3N4-TiO2 reinforced chitosan/poly(vinyl alcohol) film: Efficient and recyclable for fruit packaging.

Nanoparticles-loaded bio-based polymers have emerged as a sustainable substitute to traditional oil-based packaging materials, addressing the challenges of limited recyclability and significant environmental impact. However, the functionality and efficiency of nanoparticles have a significant impact on the application of bio-based composite films. Herein, graphitic carbon nitride (g-C3N4) and titanium dioxide (TiO2) coupled photocatalyst (g-C3N4-TiO2) was prepared by one-step calcination and introduced into chitosan (CS) and polyvinyl alcohol (PVA) solution to fabricate g-C3N4-TiO2/CS/PVA green renewable composite film via solution casting method. The results demonstrated the successful preparation of a Z-scheme heterojunction g-C3N4-TiO2 with exceptional photocatalytic activity. Furthermore, the incorporation of heterojunction enhanced mechanical properties, water barrier, and ultraviolet (UV) resistance properties of the fresh-keeping film. The g-C3N4-TiO2/CS/PVA composite film exhibited superior photocatalytic antibacterial preservation efficacy on strawberries under LED light, with a prolonged preservation time of up to 120 h, when compared to other films such as polyethylene (PE), CS/PVA, g-C3N4/CS/PVA, and TiO2/CS/PVA. In addition, the composite film has good recyclability and renewability. This work is expected to have great potential for low-cost fruit preservation and sustainable packaging, which also contributes to environmental protection.

Bio-Based Polymers for Environmentally Friendly Phase Change Materials.

Phase change materials (PCMs) have received increasing attention in recent years as they enable the storage of thermal energy in the form of sensible and latent heat, and they are used in advanced technical solutions for the conservation of sustainable and waste energy. Importantly, most of the currently applied PCMs are produced from non-renewable sources and their carbon footprint is associated with some environmental impact. However, novel PCMs can also be designed and fabricated using green materials without or with a slight impact on the environment. In this work, the current state of knowledge on the bio-based polymers in PCM applications is described. Bio-based polymers can be applied as phase-change materials, as well as for PCMs encapsulation and shape stabilization, such as cellulose and its derivatives, chitosan, lignin, gelatin, and starch. Vast attention has been paid to evaluation of properties of the final PCMs and their application potential in various sectors. Novel strategies for improving their thermal energy storage characteristics, as well as to impart multifunctional features, have been presented. It is also discussed how bio-based polymers can extend in future the potential of new environmentally-safe PCMs in various industrial fields.

Environment-Friendly Preparation and Characterization of Multilayered Conductive PVP/Col/CS Composite Doped with Nanoparticles as Potential Nerve Guide Conduits.

Tissue engineering constitutes the most promising method of severe peripheral nerve injuries treatment and is considered as an alternative to autografts. To provide appropriate conditions during recovery special biomaterials called nerve guide conduits are required. An ideal candidate for this purpose should not only be biocompatible and protect newly forming tissue but also promote the recovery process. In this article a novel, multilayered biomaterial based on polyvinylpyrrolidone, collagen and chitosan of gradient structure modified with conductive nanoparticles is presented. Products were obtained by the combination of electrospinning and electrospraying techniques. Nerve guide conduits were subjected to FT-IR analysis, morphology and elemental composition study using SEM/EDS as well as biodegradation. Furthermore, their effect on 1321N1 human cell line was investigated by long-term cell culture. Lack of cytotoxicity was confirmed by XTT assay and morphology study. Obtained results confirmed a high potential of newly developed biomaterials in the field of nerve tissue regeneration with a special focus on injured nerves recovery.

Embracing Sustainability: The World of Bio-Based Polymers in a Mini Review.

The proliferation of polymer science and technology in recent decades has been remarkable, with synthetic polymers derived predominantly from petroleum-based sources dominating the market. However, concerns about their environmental impacts and the finite nature of fossil resources have sparked interest in sustainable alternatives. Bio-based polymers, derived from renewable sources such as plants and microbes, offer promise in addressing these challenges. This review provides an overview of bio-based polymers, discussing their production methods, properties, and potential applications. Specifically, it explores prominent examples including polylactic acid (PLA), polyhydroxyalkanoates (PHAs), and polyhydroxy polyamides (PHPAs). Despite their current limited market share, the growing awareness of environmental issues and advancements in technology are driving increased demand for bio-based polymers, positioning them as essential components in the transition towards a more sustainable future.