Fabrication of a bio-based polymer adsorbent and its application for extraction and determination of glycosides from Huangqi Liuyi decoction.

Huangqi Liuyi Decoction, a famous classical Chinese prescription, shows significant curative effect on diabetes and its complications, in which calycosin-7-glucoside, liquiritin and glycyrrhizic acid are the main components that playing these mentioned pharmacological activity, under the synergistic action of various other ingredients in the decoction. However, there are significant differences in the content of active compounds in Chinese medicinal materials, which mainly due to origin, picking seasons, and processing methods. Hence, the accurate content of the glycosides is the prerequisite for ensuring the pharmacological efficacy. Aiming at establishing an efficient extraction and determination method for accurate quantitative analysis of calycosin-7-glucoside, liquiritin and glycyrrhizic acid in Huangqi Liuyi Decoction, an on line solid-phase extraction-high-performance liquid chromatography method was developed, using a homemade bio-based monolithic adsorbent. The bio-based adsorbent was prepared in a stainless steel tube, using bio-monomers of methyleugenol and S-allyl-L-cysteine, which effectively reduced the dependence of the polymer field on non-renewable fossil resources and reduced carbon emissions. Furthermore, the prepared adsorbent owned abundant chemical groups, which can produce interactions of hydrogen bond, dipole-dipole, π-π and hydrophobic force with the target glycosides, thus improving the specific recognition ability of the adsorbent. The experiments were carried out on an LC-3000 HPLC instrument with a six-way valve. Methodology validation indicates that the recovery is in the range of 97.0%-103.4% with the RSD in the range of 1.6%-4.0%, due to the specific selectivity of the bio-based monolithic adsorbent for these three glycosides, and good matrix-removal ability for Huangqi Liuyi decoction. The limit of detection is 0.17, 0.50 and 0.33 µg/mL for calycosin-7-glucoside, liquiritin and glycyrrhizic acid, respectively, and the limit of quantitation is 0.50, 1.50 and 1.00 µg/mL, respectively, with the linear range of 2-200 µg/mL for calycosin-7-glucoside, and 5-500 µg/mL for liquiritin and glycyrrhizic acid. The present work provided a simple and efficient method for the extraction and determination of glycosides in complex medicinal plants.

Fully Aromatic Thermotropic Copolyesters Based on Vanillic, Hydroxybenzoic, and Hydroxybiphenylcarboxylic Acids.

Several series of new polymers were synthesized in this study: binary copolyesters of vanillic (VA) and 4'-hydroxybiphenyl-4-carboxylic (HBCA) acids, as well as ternary copolyesters additionally containing 4-hydroxybenzoic acid (HBA) and obtained via three different ways (in solution, in melt, and in solid state). The high values of logarithmic intrinsic viscosities and the insolubility of several samples proved their high molecular weights. It was found that the use of vanillic acid leads to the production of copolyesters with a relatively high glass transition temperature (~130 °C). Thermogravimetric analysis revealed that the onset of weight loss temperatures of ternary copolyesters occurred at 330-350 °C, and the temperature of 5% mass loss was in the range of 390-410 °C. Two-stage thermal destruction was observed for all aromatic copolyesters of vanillic acid: decomposition began with VA units at 420-480 °C, and then the decomposition of more heat-resistant units took place above 520 °C. The copolyesters were thermotropic and exhibited a typical nematic type of liquid crystalline order. The mechanical characteristics of the copolyesters were similar to those of semi-aromatic copolyesters, but they were much lower than the typical values for fully aromatic thermotropic polymers. Thus, vanillic acid is a mesogenic monomer suitable for the synthesis of thermotropic fully aromatic and semi-aromatic copolyesters, but the processing temperature must not exceed 280 °C.