Solvent-Triggered, Ultra-Adhesive, Conductive, and Biocompatible Transition Gels for Wearable Devices.

The development of robust adhesive, conductive, and flexible materials has garnered significant attention in the realm of human-machine interface and electronic devices. Conventional preparation methods to achieve these exceptional properties rely on incorporating highly polar raw materials, multiple components, or solvents. However, the overexposure of functional groups and the inherent toxicity of organic solvents often render gels non-stick or potentially biocompatible making them unsuitable for human-contact devices. In this study, a straightforward three-step strategy is devised for preparing responsive adhesive gels without complex components. Structurally conductive poly(N-(2-hydroxyethyl)-acrylamide-co-p-styrene sulfonate hydrate) (PHEAA-NaSS) gels are synthesized by integrating ionic and hydrophilic networks with distinct solvent effects. Initially, the in-suit formed PHEAA-NaSS networks are activated by dimethyl sulfoxide, which substantially increases intramolecular hydrogen bonding and enhances the matrix stretchability and interfacial adhesion. Subsequently, ethanol exchange reduced solvent impact and led to a compact network that limited surface exposure of ionic and hydrophilic groups, resulting in nonstick, robust for convenient storage. Finally, upon contacting with water, the network demonstrates rehydration, resulting in favorable adhesion, biocompatibility, and conductivity. The proposed PHEAA-NaSS/W gels can stably and reliably capture joint motion and electrophysiological signals. Furthermore, this uncomplicated gel preparation method is also applicable to other electrolyte monomers.

Fast preparing bioelectrode with conductive bioink for nitrite detection in high sensitivity and stability.

Electrochemically active biofilms (EABs) for nitrite detection have high specificity, rapid response, operational simplicity, and extended lifespan advantages. However, their scale production remains challenging due to time-consuming and uniform preparation. In this study, a novel approach was proposed to fast fabricate an EAB biosensor with a synthetic biofilm electrode for nitrite detection. The biofilm electrode was prepared by coating bioinks with varying conductive materials onto the surface of the graphite sheets, showing short incubation time and good reproducibility. Incorporating conductive materials into the bioinks remarkably enhanced the maximum voltage of the first cycle of bioelectrode incubation, with an increase of up to 633% for carbon nanofiber. The nitrite reduction current was amplified by a factor of 2.97, due to the enhancement of extracellular electron transfer (EET). The developed nitrite biosensor exhibited a detection range of 0.1 to 15 mg NO-2-N L-1, with a high sensitivity of 610.8 µA mM-1 cm-2, and a stabilization operation time of at least 280 cycles. This study not only provided valuable insights into conductive materials for synthetic biofilms but also presented a practical approach for the rapid preparation, scale production, and optimization of highly sensitive and stable EAB sensors.

Implementation of cytochrome c proteins and carbon nanotubes hybrids in bioelectrodes towards bioelectrochemical systems applications.

Multiheme cytochrome c (Cyt c) can function as a redox protein on electrode to accomplish bioelectrocatalysis. However, the direct electron transfer (DET) between the redox site of Cyt c and electrode is low due to the large coupling distance. A close proximity or a connection pathway from the deeply buried active site to the protein surface can be established by modifying the electrode with carbon nanotubes (CNTs) to improve the DET. Therefore, the isolated Cyt c has been assembled or casted with CNTs by various processes to form Cyt c-CNTs bioelectrodes that can be further applied to biosensing and bioanalysis. These strategies can be transplanted to the fabrication of biofilm-CNTs based electrodes by complexing the out membrane (OM) Cyt c of natural electricigen with CNTs to realize the application of the electrochemical properties of "in vivo" Cyt c to bioelectrochemical systems (BESs). This review intends to highlight the preparation strategies of bioelectrodes that have been well studied in electrochemical biosensors and improving approaches of the DET from the CNTs surface to Cyt c in their hybrids. The efficient fabrication processes of the biofilm-CNTs based electrodes that can be considered as "in vivo" Cyt c-CNTs based electrodes for BES designs are also summarized, aiming to provide an inspiration source and a reference to the related studies of BES downstream.

Electro-immunosensor for ultra-sensitive determination of cardiac troponin I based on reduced graphene oxide and polytyramine.

This work reports the construction of a novel nanostructured immunosensor for detection of the troponin I biomarker (cTnI). Anti-troponin I antibody was anchored on the modified graphite electrode with reduced graphene oxide and polytyramine for detection of troponin I in serum samples. The performance of the electro-immunosensor was evaluated by differential pulse voltammetry. The immunosensor presented a wide work range, from 4 ng mL-1 to 4 pg mL-1 , whose detection limit (4 pg mL-1 ) is significantly lower than the basal level in human serum, and maintained 100% of response after 30 days of storage. Moreover, the immunosensor showed good selectivity for detection of cTnI in real sample containing interfering substances and specificity of response to cTnI in the serum of healthy and sick patients, and demonstrated the possibility of reuse for two consecutive analyses, in addition to using a simplified and inexpensive platform when compared to other devices, demonstrating them excellent potential for application in diagnosis in the early stages of acute myocardial infarction.

In Situ Probing the Mass Transport Property Inside an Imitated Three-Dimensional Porous Bioelectrode.

Three-dimensional porous materials have been demonstrated as the most successful bioelectrodes in bioelectrochemical systems due to their high specific surface area and abundant adhesion regions for electroactive bacteria. However, the pore clogging potentially limits the mass transfer process inside the electrode due to the unreasonable structure design and long-term operation. The investigation of mass transport behavior in the porous scaffolds is of great significance for designing the electrode structure and optimizing bioelectrochemical system performance. To in situ characterize the mass transport behavior in the orderly pore structure, model electrodes with 100 copper wires (10 × 10) are constructed to imitate a three-dimensional porous structure (pore size: ∼150 µm) commonly employed in bioelectrodes. The poor proton effective diffusion coefficient solidly demonstrates that the mass transport inside the three-dimensional porous electrode is critically inhibited, leading not only to a progressive change and sparse biomass in the biofilm development process but also to biofilm acidification due to serious proton accumulation. It finally results in sluggish bacterial metabolic activity and a decreased electrocatalytic capacity. The interior space of porous electrodes cannot be adequately utilized, resulting in the inability to fully exploit the advantages of their abundant surface area. Consequently, the construction of gradient porous electrodes with small inner and large outer pores to enhance mass transport is a feasible proposal for enhancing performance. The proposed methodology of establishing model electrodes combined with the in situ detection technique within porous electrodes is crucial for acquiring various types of physicochemical information inside the bioelectrode, such as biofilm growth situation, biochemical reaction conditions, as well as mass transfer characteristics. More importantly, the work provides a fundamental basis for designing highly efficient bioelectrodes.

Multifunctional Cu:ZnS quantum dots for degradation of Amoxicillin and Dye Sulphon Fast Black-F and efficient determination of urea for assessing environmental aspects.

This work is particularly aimed at the preparation of ZnS and Cu doped ZnS (Cu:ZnS) QDs by facile and easy technique, chemical precipitation method for the degradation of water pollutants and a simple scheme was proposed to prepare the urea-sensing system. The morphological and optical properties of the synthesized QDs was studied using high resolution transmission and scanning electron microscopes, X-ray diffraction, energy dispersive X-ray analysis, fluorescence and ultraviolet-visible spectroscopy, differential thermal and thermogravimetric analyses, Brunauer-Emmett-Teller analysis. The photocatalytic performance was systematically assessed by the photodegradation of an important pharmaceutical water pollutant, Amoxicillin (AMX) and a dye Fast Sulphon Black F (SFBF) in aqueous medium under UV light irradiation. Also, a very sensitive system was prepared by depositing the dots over an indium-tin-oxide (ITO) glass substrate for the sensing of biologically active molecule urea as it is an important monitor of public health in water and soil productivity. The results illustrated excellent photocatalytic efficiency (86.46% for AMX and 99.41% for SFBF) with stability up to four cycles of degradation reaction. The optimal photocatalyst dosage for achieving maximum removal of AMX was found to be 70 mg at a pH of 9.5, with a treatment time of 40 min. Similarly, for SFBF, the optimal photocatalyst dosage was determined to be 60 mg at pH 9, with a treatment time of 60 min. Further, the electrochemical analysis was done by fabricating Urease enzyme (UR)/Cu:ZnS QDs/ITO bioelectrode and then the fabricated bioelectrode, was utilized to determine the different concentrations of urea by cyclic voltammetry. Thus, the obtained limit of detection and sensitivity of the fabricated biosensing device for urea detection was obtained to be 0.0092 µM and 12 µA µM-1cm-2, respectively; under the optimized experimental conditions. Hence, it is anticipated that Cu:ZnS QDs can also successfully be applied as a promising material for fabrication of novel bioelectrode for urea determination and the biosensing platform is desirable and viable.

Perspiration-Wicking and Luminescent On-Skin Electronics Based on Ultrastretchable Janus E-Textiles.

Stretchable electronics have attracted surging attention for next-generation smart wearables, yet traditional flexible devices fabricated on hermetical elastic substrates cannot satisfy lengthy wearing comfort and signal stability due to their poor moisture and air permeability. Herein, perspiration-wicking and luminescent on-skin electrodes are fabricated on superelastic nonwoven textiles with a Janus configuration. Through the electrospin-assisted face-to-face assembly of all-SEBS microfibers with differentiated diameters and composition, porosity and wettability asymmetry are constructed across the textile, endowing it with antigravity water transport capability for continuous sweat release. Also, the phosphor particles evenly encapsulated in the elastic fibers empower the Janus textile with stable light-emitting capability under extreme stretching in a dark environment. Additionally, the precise printing of highly conductive liquid metal (LM) circuits onto the matrix not only equips the electronic textile with broad detectability for various biophysical and electrophysiological signals but also enables successful implementation of human-machine interface (HMIs) to control a mechanical claw.

Magnetic field assisted laser fabrication and electrical characterizations of metal dry Biolectrode with surface microstructures.

Magnetic field assisted laser fabrication is proposed to process metal dry bioelectrode with surface microstructures. The effects of magnetic flux density on the geometrical dimension of surface microstructures of bioelectrode is investigated. The electrode-skin contact impedance is then studied using the two-electrode measurement method. Finally, electromyography (EMG) signal is recorded using bioelectrodes processed in different magnetic flux density. Our results show that the magnetic field has obvious influences on the height and bottom width of microstructure of bioelectrode. When a magnetic field of 100 mT is selected, larger height-width ratio of microstructures is obtained, which provides a stronger ability to penetrate stratum corneum. Consequently, much lower contact impedance is obtained. Signal-noise ratio (SNR) of EMG signal shows a correlation coefficient of 0.9836 with height-width ratio of microstructures on the surface of metal dry bioelectrodes. Raw EMG signals recorded by metal dry bioelectrodes in 100 mT magnetic field show a high SNR up to 27.350, which is slightly higher than that of traditional Ag/AgCl wet bioelectrodes (26.689). By stationary wavelet transform (SWT) de-noising, noise interfused in raw EMG signals is suppressed effectively. Moreover, the de-noised EMG signal recorded using metal dry bioelectrodes processed in 100 mT magnetic field still remains a fairly high SNR.

Fabrication of electrochemical biosensor with vanadium pentoxide nano-interface for the detection of methylglyoxal in rice.

Increased consumption of raw and par-boiled rice results in the formation of methylglyoxal (MG) at higher concentration and leads to complications in diabetic patients. Highly sensitive electrochemical biosensor was developed using glutathione (GSH) as a co-factor with vanadium pentoxide (V2O5) as a nano-interface for MG detection in rice samples. The Pt/V2O5/GSH/Chitosan bioelectrode displayed two well-defined redox peaks in its cyclic voltammograms for MG reduction. This occurred as two electron transfer process where MG gained two electrons from oxidized glutathione disulfide and formed hemithioacetal. The current density response of the fabricated bioelectrode was linear towards MG in the concentration range of 0.1-100 µM with the correlation coefficient of 0.99, sensitivity of 1130.86 µA cm-2 µM-1, limit of detection of 2 nM and response time of less than 18 s. The developed bioelectrode was used for the detection of MG in raw and par-boiled rice samples.

Mussel-Bioinspired Lignin Adhesive for Wearable Bioelectrodes.

As a natural "binder," lignin fixes cellulose in plants to foster growth and longevity. However, isolated lignin has a poor binding ability, which limits its biomedical applications. In this study, inspired by mussel adhesive proteins, acidic/basic amino acids (AAs) are introduced in alkali lignin (AL) to form ionic-π/spatial correlation interactions, followed by demethylation to create catechol residues for enhanced adhesion activity. Atomic force microscopy reveals that catechol residues are the primary adhesion structures, with basic AAs exhibiting superior synergistic effects compared to acidic AAs. Demethylated lysine-grafted AL exhibits the strongest adhesion force toward skin tissue. Molecular dynamic simulation and density functional theory calculations indicate that adhesion against skin tissue mainly results from hydrogen bonds and cation-π interactions, with the adhesion mechanism being based on the Gibbs free energy of the Schiff base reaction. In summary, a biomimetic electrode based on lignin inspired by mussel adhesive proteins is prepared; the presented method offers a straightforward strategy for the development of biomimetic adhesives. Furthermore, this mussel-inspired adhesive can be used as a wearable bioelectrode in biomedical applications.

Enzymatically stable, non-cell adhesive, implantable polypyrrole/thiolated hyaluronic acid bioelectrodes for in vivo signal recording.

Implantable bioelectrodes have attracted significant attention for precise in vivo signal transduction with living systems. Conductive polymers, including polypyrrole (PPy), have been widely used as bioelectrodes due to their large surface areas, high charge injections, and versatilities for modification. Especially, several natural biopolymers, such as hyaluronic acid (HA), can be incorporated into conductive polymers to produce biomimetic electrodes with better biocompatibility. However, HA-incorporated PPy electrodes (PPy/HA) frequently lose their original performances after implantation in the body because of the deterioration of material properties, such as degradation of natural biopolymers in the electrode. Here, thiolated HA (HA-SH) was synthesized and introduced into PPy electrodes (PPy/HA-SH) to enhance the enzymatic stabilities of PPy electrodes against hyaluronidase (HAase) and endow these electrodes with robust resistances to non-specific cell adhesion, thereby enabling prolonged signal transmission. Unlike PPy/HA, PPy/HA-SH resisted cell adhesion even in the presence of HAase. Subcutaneous implantation studies revealed that PPy/HA-SH formed less fibrotic scar tissue and permitted more sensitive and stable signal recording for up to 15 days after implantation as compared to PPy/HA. These findings hold significance for the design and advancement of biocompatible implantable bioelectrodes for a wide range of applications, such as neural electrodes, cardiac pacemakers, and biosensors.

Frequency-modulated alternating current-driven bioelectrodes for enhanced mineralization of Alizarin Yellow R.

The alternating current (AC)-driven bioelectrochemical process, in-situ coupling cathodic reduction and anodic oxidation in a single electrode, offers a promising way for the mineralization of refractory aromatic pollutants (RAPs). Frequency modulation is vital for aligning reduction and oxidation phases in AC-driven bioelectrodes, potentially enhancing their capability to mineralize RAPs. Herein, a frequency-modulated AC-driven bioelectrode was developed to enhance RAP mineralization, exemplified by the degradation of Alizarin Yellow R (AYR). Optimal performance was achieved at a frequency of 1.67 mHz, resulting in the highest efficiency for AYR decolorization and subsequent mineralization of intermediates. Performance declined at both higher (3.33 and 8.30 mHz) and lower (0.83 mHz) frequencies. The bioelectrode exhibited superior electron utilization, bidirectional electron transfer, and redox bifunctionality, effectively aligning reduction and oxidation processes to enhance AYR mineralization. The 1.67 mHz frequency facilitated the assembly of a collaborative microbiome dedicated to AYR bio-mineralization, characterized by an increased abundance of functional consortia proficient in azo dye reduction (e.g., Stenotrophomonas and Shinella), aromatic intermediates oxidation (e.g., Sphingopyxis and Sphingomonas), and electron transfer (e.g., Geobacter and Pseudomonas). This study reveals the role of frequency modulation in AC-driven bioelectrodes for enhanced RAP mineralization, offering a novel and sustainable approach for treating RAP-bearing wastewater.

A wearable and flexible lactic-acid/O2 biofuel cell with an enhanced air-breathing biocathode.

The performance of biocathode in an enzymatic biofuel cell (EBFC) in the real application is somehow overlooked. Herein, a wearable and flexible lactic-acid/O2 EBFC enhanced with an air-breathing biocathode is designed to solve the limitation of biocathode that arises from the low solubility and slow mass transfer of the dissolved oxygen. To improve the oxygen supply efficiency for the air-breathing biocathode, a superhydrophobic base electrode creating an efficient air-solid-liquid triphase interface is developed. The designed EBFC with an 'island-bridge' configuration is integrated by assembling the current collectors of air-breathing biocathode and bioanode on a commercial laminating film (LF) screen-printed with a noninterfering circuit. It is found that the biocathode/bioanode area ratio should exceed 9:1 so that the designed EBFC (1A//9C) can achieve the optimal performance. This EBFC delivers an open circuit voltage of ca. 0.75 V and outputs a maximum power density of ca. 1.78 mW cm-2. In addition, a scaled-up EBFC (total bioanode area: 1.5 cm2) successfully powers a self-developed low-power device of heartrate in the pulse operation mode when applied on a volunteer's arm.

Microbial electrosynthesis of valuable chemicals from the reduction of CO2: a review.

The present energy demand of the world is increasing but the fossil fuels are gradually depleting. As a result, the need for alternative fuels and energy sources is growing. Fuel cells could be one alternative to address the challenge. The fuel cell can convert CO2 to value-added chemicals. The potential of bio-fuel cells, specifically enzymatic fuel cells and microbial fuel cells, and the importance of immobilization technology in bio-fuel cells are highlighted. The review paper also includes a detailed explanation of the microbial electrosynthesis system to reduce CO2 and the value-added products during microbial electrosynthesis. Future research in bio-electrochemical synthesis for CO2 conversion is expected to prioritize enhancing biocatalyst efficiency, refining reactor design, exploring novel electrode materials, understanding microbial interactions, integrating renewable energy sources, and investigating electrochemical processes for carbon capture and selective CO2 reduction. The challenges and perspectives of bio-electrochemical systems in the application of CO2 conversion are also discussed. Overall, this review paper provides valuable insights into the latest developments and criteria for effective research and implementation in bio-fuel cells, immobilization technology, and microbial electro-synthesis systems.

Biocompatible neem gum-modified polyvinyl alcohol composite as dielectric material for flexible energy devices.

In our pursuit of a flexible energy storage solution, we have developed biocompatible (bc)-NG/PVA composite polymers by combining neem tree gum (NG) with polyvinyl alcohol (PVA). This innovative bio-inspired approach harnesses NG's unique properties for both the bio-electrolyte and bio-electrode components. The resulting bc-NG/PVA composites exhibit superior dielectric strength and versatility, surpassing traditional inorganic ceramic dielectrics in advanced electronics and pulsed power systems. Our study investigates the dielectric characteristics, conductivities, electric modulus, and impedance parameters of Pure PVA and NG-doped PVA composites. Adding 5 % NG to PVA significantly boosts its conductivity from 10-8 S cm-1 to 10-4 S cm-1, while the dielectric constant of PVA/5 % NG composite jumps to 104.5 compared to pure PVA. These improvements position the composite films of 5 % NG added PVA as promising materials for diverse applications. The heightened performance of these NG-blended PVA composite materials underscores their potential as a valuable resource for flexible energy storage solutions.

Implantable polypyrrole bioelectrodes inducing anti-inflammatory macrophage polarization for long-term in vivo signal recording.

Bioelectrodes are critical components of implantable electronic devices that enable precise electrical signal transmission in close contact with living tissues. However, their in vivo performance is often compromised by inflammatory tissue reactions mainly induced by macrophages. Hence, we aimed to develop implantable bioelectrodes with high performance and high biocompatibility by actively modulating the inflammatory response of macrophages. Consequently, we fabricated heparin-doped polypyrrole electrodes (PPy/Hep) and immobilized anti-inflammatory cytokines (interleukin-4 [IL-4]) via non-covalent interactions. IL-4 immobilization did not alter the electrochemical performance of the original PPy/Hep electrodes. In vitro primary macrophage culture revealed that IL-4-immobilized PPy/Hep electrodes induced anti-inflammatory polarization of macrophages, similar to the soluble IL-4 control. In vivo subcutaneous implantation indicated that IL-4 immobilization on PPy/Hep promoted the anti-inflammatory polarization of host macrophages and significantly mitigated scarring around the implanted electrodes. In addition, high-sensitivity electrocardiogram signals were recorded from the implanted IL-4-immobilized PPy/Hep electrodes and compared to bare gold and PPy/Hep electrodes, which were maintained for up to 15 days post-implantation. This simple and effective surface modification strategy for developing immune-compatible bioelectrodes will facilitate the development of various electronic medical devices that require high sensitivities and long-term stabilities. STATEMENT OF SIGNIFICANCE: To fabricate highly immunocompatible conductive polymer-based implantable electrodes with high performance and stability in vivo, we introduced the anti-inflammatory activity to PPy/Hep electrodes by immobilizing IL-4 via non-covalent surface modification. IL-4-immobilized PPy/Hep could significantly mitigate inflammatory responses and scarring around implants by skewing macrophages to an anti-inflammatory phenotype. The IL-4-immobilized PPy/Hep electrodes could successfully record in vivo electrocardiogram signals for up to 15 days with no substantial sensitivity loss, retaining their superior sensitivity compared to bare gold and pristine PPy/Hep electrodes. Our simple and effective surface modification strategy for developing immune-compatible bioelectrodes will facilitate the development of various electronic medical devices that require high sensitivities and long-term stabilities, such as neural electrode arrays, biosensors, and cochlear electrodes.

Biochar assisted cultivation of Chlorella protothecoides for adsorption of tetracycline and electrochemical study on self-cultured Chlorella protothecoides.

Microalgae present a viable mechanism for purifying aquatic environments through the absorption of organic pollutants. In this paper, Chlorella protothecoides was cultured in a tetracycline environment, and biochar was added during the cultivation process. Compared with conventionally cultured Chlorella protothecoides, the addition of biochar for cultivation under a tetracycline environment increased the biomass of Chlorella protothecoides by 13.26 %. Moreover, the adsorption of tetracycline by biochar alone was not complete, but when mixed with Chlorella protothecoides, tetracycline was completely removed, which proved the biosorption of Chlorella protothecoides for low concentrations of tetracycline. Finally, the cultured Chlorella protothecoides was used further to prepare electrode materials, and it was found that the specific capacitance of the material reached 233.15F/g at a current density of 1 A/g. In this study, the use of biochar and Chlorella protothecoides to jointly adsorb tetracycline is of great significance for environmental protection and microalgae cultivation.

Chitosan-carbon nanofiber based disposable bioelectrode for electrochemical detection of oxytocin.

Bioelectrodes with low carbon footprint can provide an innovative solution to the surmounting levels of e-waste. Biodegradable polymers offer green and sustainable alternatives to synthetic materials. Here, a chitosan-carbon nanofiber (CNF) based membrane has been developed and functionalized for electrochemical sensing application. The surface characterization of the membrane revealed crystalline structure with uniform particle distribution, and surface area of 25.52 m2/g and pore volume of 0.0233 cm3/g. The membrane was functionalized to develop a bioelectrode for the detection of exogenous oxytocin in milk. Electrochemical impedance spectroscopy was employed to determine oxytocin in a linear concentration range of 10 to 105 ng/mL. The developed bioelectrode showed an LOD of 24.98 ± 11.37 pg/mL and sensitivity of 2.77 × 10-10 Ω / log ng mL-1/mm2 for oxytocin in milk samples with 90.85-113.34 percent recovery. The chitosan-CNF membrane is ecologically safe and opens new avenues for environment-friendly disposable materials for sensing applications.

Hydrogenase-based electrode for hydrogen sensing in a fermentation bioreactor.

The hydrogen-based economy will require not only sustainable hydrogen production but also sensitive and cheap hydrogen sensors. Commercially available H2 sensors are limited by either use of noble metals or elevated temperatures. In nature, hydrogenase enzymes present high affinity and selectivity for hydrogen, while being able to operate in mild conditions. This study aims at evaluating the performance of an electrochemical sensor based on carbon nanomaterials with immobilised hydrogenase from the hyperthermophilic bacterium Aquifex aeolicus for H2 detection. The effect of various parameters, including the surface chemistry, dispersion degree and amount of deposited carbon nanotubes, enzyme concentration, temperature and pH on the H2 oxidation are investigated. Although the highest catalytic response is obtained at a temperature around 60 °C, a noticeable current can be obtained at room temperature with a low amount of protein less than 1 µM. An original pulse-strategy to ensure H2 diffusion to the bioelectrode allows to reach H2 sensitivity of 4 µA cm-2 per % H2 and a linear range between 1 and 20%. Sustainable hydrogen was then produced through dark fermentation performed by a synthetic bacterial consortium in an up-flow anaerobic packed-bed bioreactor. Thanks to the outstanding properties of the A. aeolicus hydrogenase, the biosensor was demonstrated to be quite insensitive to CO2 and H2S produced as the main co-products of the bioreactor. Finally, the bioelectrode was used for the in situ measurement of H2 produced in the bioreactor in steady-state.

Intrinsically Stretchable, Self-Healing, and Large-Scale Epidermal Bioelectrode Arrays for Electrophysiology and Gesture Recognition.

Electrophysiological (EP) signals, referred to as low-level biopotentials driven by active or passive human movements, are of great importance for kinesiology, rehabilitation, and human-machine interaction. To capture high-fidelity EP signals, bioelectrodes should possess high conductivity, high stretchability, and high conformability to skin. While traditional metal bioelectrodes are endowed with stretchability via complex structural designs, they are vulnerable to external or internal inference due to their low fracture strain and large modulus. Here, we report a self-healing elastic composite of silver nanowire (AgNW), graphite nanosheet, and styrene-block-poly(ethylene-ran-butylene)-block-polystyrene, which exhibits high stretchability of ε = 500%, high conductivity of σ = ∼1923 S·cm-1, and low resistance change (ΔR/R0) of 0.14 at ε = 40% while its resistance increases ∼0.8% after a 24 h stretching operation at ε = 50%. We employed the elastic composites for accurate and stable monitoring of electrocardiograph and surface electromyography (sEMG) signals. Further, we demonstrate an all-solution and printable process to obtain a large-scale sEMG bioelectrode array, enabling highly conformal adhesion on skin and high-fidelity gesture recognition.