A novel closed-loop biotechnology for recovery of cobalt from a lithium-ion battery active cathode material.

In recent years, the demand for lithium-ion batteries (LIBs) has been increasing rapidly. Conventional recycling strategies (based on pyro- and hydrometallurgy) are damaging for the environment and more sustainable methods need to be developed. Bioleaching is a promising environmentally friendly approach that uses microorganisms to solubilize metals. However, a bioleaching-based technology has not yet been applied to recover valuable metals from waste LIBs on an industrial scale. A series of experiments was performed to improve metal recovery rates from an active cathode material (LiCoO2; LCO). (i) Direct bioleaching of ≤0.5 % LCO with two prokaryotic acidophilic consortia achieved >80 % Co and 90 % Li extraction. Significantly lower metal recovery rates were obtained at 30 °C than at 45 °C. (ii) In contrast, during direct bioleaching of 3 % LCO with consortia adapted to elevated LCO levels, the 30 °C consortium performed significantly better than the 45 °C consortium, solubilizing 73 and 93 % of the Co and Li, respectively, during one-step bioleaching, and 83 and 99 % of the Co and Li, respectively, during a two-step process. (iii) The adapted 30°C consortium was used for indirect leaching in a low-waste closed-loop system (with 10 % LCO). The process involved generation of sulfuric acid in an acid-generating bioreactor (AGB), 2-3 week leaching of LCO with the biogenic acid (pH 0.9), selective precipitation of Co as hydroxide, and recirculation of the metal-free liquor back into the AGB. In total, 58.2 % Co and 100 % Li were solubilized in seven phases, and >99.9 % of the dissolved Co was recovered after each phase as a high-purity Co hydroxide. Additionally, Co nanoparticles were generated from the obtained Co-rich leachates, using Desulfovibrio alaskensis, and Co electrowinning was optimized as an alternative recovery technique, yielding high recovery rates (91.1 and 73.6% on carbon felt and roughened steel, respectively) from bioleachates that contained significantly lower Co concentrations than industrial hydrometallurgical liquors. The closed-loop system was highly dominated by the mixotrophic archaeon Ferroplasma and sulfur-oxidizing bacteria Acidithiobacillus caldus and Acidithiobacillus thiooxidans. The developed system achieved high metal recovery rates and provided high-purity solid products suitable for a battery supply chain, while minimizing waste production and the inhibitory effects of elevated concentrations of dissolved metals on the leaching prokaryotes. The system is suitable for scale-up applications and has the potential to be adapted to different battery chemistries.

Iron bioleaching and polymers accumulation by an extreme acidophilic bacterium.

In many European regions, both local metallic and non-metallic raw materials are poorly exploited due to their low quality and the lack of technologies to increase their economic value. In this context, the development of low cost and eco-friendly approaches, such as bioleaching of metal impurities, is crucial. The acidophilic strain Acidiphilium sp. SJH reduces Fe(III) to Fe(II) by coupling the oxidation of an organic substrate to the reduction of Fe(III) and can therefore be applied in the bioleaching of iron impurities from non-metallic raw materials. In this work, the physiology of Acidiphilium sp. SJH and the reduction of iron impurities from quartz sand and its derivatives have been studied during growth on media supplemented with various carbon sources and under different oxygenation conditions, highlighting that cell physiology and iron reduction are tightly coupled. Although the organism is known to be aerobic, maximum bioleaching performance was obtained by cultures cultivated until the exponential phase of growth under oxygen limitation. Among carbon sources, glucose has been shown to support faster biomass growth, while galactose allowed highest bioleaching. Moreover, Acidiphilium sp. SJH cells can synthesise and accumulate Poly-ß-hydroxybutyrate (PHB) during the process, a polymer with relevant application in biotechnology. In summary, this work gives an insight into the physiology of Acidiphilium sp. SJH, able to use different carbon sources and to synthesise a technologically relevant polymer (PHB), while removing metals from sand without the need to introduce modifications in the process set up.

Scalable and Consolidated Microbial Platform for Rare Earth Element Leaching and Recovery from Waste Sources.

Chemical methods for the extraction and refinement of technologically critical rare earth elements (REEs) are energy-intensive, hazardous, and environmentally destructive. Current biobased extraction systems rely on extremophilic organisms and generate many of the same detrimental effects as chemical methodologies. The mesophilic methylotrophic bacterium Methylobacterium extorquens AM1 was previously shown to grow using electronic waste by naturally acquiring REEs to power methanol metabolism. Here we show that growth using electronic waste as a sole REE source is scalable up to 10 L with consistent metal yields without the use of harsh acids or high temperatures. The addition of organic acids increases REE leaching in a nonspecific manner. REE-specific bioleaching can be engineered through the overproduction of REE-binding ligands (called lanthanophores) and pyrroloquinoline quinone. REE bioaccumulation increases with the leachate concentration and is highly specific. REEs are stored intracellularly in polyphosphate granules, and genetic engineering to eliminate exopolyphosphatase activity increases metal accumulation, confirming the link between phosphate metabolism and biological REE use. Finally, we report the innate ability of M. extorquens to grow using other complex REE sources, including pulverized smartphones, demonstrating the flexibility and potential for use as a recovery platform for these critical metals.

Bioseparation of rare earth elements and high value-added biomaterials applications.

Rare earth elements (REEs) are a group of critical minerals and extensively employed in new material manufacturing. However, separation of lanthanides is difficult because of their similar chemical natures. Current lanthanide leaching and separation methods require hazardous compounds, resulting in severe environmental concerns. Bioprocessing of lanthanides offers an emerging class of tools for REE separation due to mild leaching conditions and highly selective separation scenarios. In the course of biopreparation, engineered microbes not only dissolve REEs from ores but also allow for selective separation of the lanthanides. In this review, we present an overview of recent advances in microbes and proteins used for the biomanufacturing of lanthanides and discuss high value-added applications of REE-derived biomaterials. We begin by introducing the fundamental interactions between natural microbes and REEs. Then we discuss the rational design of chassis microbes for bioleaching and biosorption. We also highlight the investigations on REE binding proteins and their applications in the synthesis of high value-added biomaterials. Finally, future opportunities and challenges for the development of next generation lanthanide-binding biological systems are discussed.

A novelty strategy for AMD prevention by biogas slurry: Acetate acid inhibition effect on chalcopyrite biooxidation and leachate.

With the widespread application of anaerobic digestion technology, biogas slurry become the main source of organic amendments in practice. Comprehensive studies into the inhibitory effects of low molecular weight (LMW) organic acids, essential components in biogas slurry, on the sulfide minerals biooxidation and its bioleaching (AMD) have been lacking. In this study, acetic acid (AA) served as a representative of LMW organic acids in biogas slurry to investigate its impact on the inhibition of chalcopyrite biooxidation by Acidithiobacillus ferrooxidans (A. ferrooxidans). It was shown that AA could slow down the chalcopyrite biooxidation and inhibit the jarosite formation on the mineral surface. Compared with the control group (0 ppm AA), the sulfate increment in the leachate of the 50 ppm, 100 ppm, and 200 ppm AA-treated groups decreased by 36.4%, 66.8%, and 69.0%, respectively. AA treatment (≥50 ppm) could reduce the oxidation of ferrous ions in the leachate by one order of magnitude. At the same time, the bacterial concentration of the leachate in the 50 ppm, 100 ppm, and 200 ppm AA-treated groups decreased by 70%, 93%, and 94%, respectively. These findings provide a scientific basis for new strategies to utilize biogas slurry for mine remediation and contribute to an enhanced comprehension of organic amendments to prevent AMD in situ in mining soil remediation.

The role of microstructure of extracellular proteins in dewaterability of alkaline pretreatment sludge during bioleaching.

Alkaline pre-treatment is known to enhance the acid production efficiency of sludge but adversely affects its dewatering performance. In this study, the improvement of sludge dewaterability by a novel bioleaching system with inoculating domesticated acidified sludge (AS) and its underlying mechanism were investigated. The results showed that although the addition of Fe2+ and the reduction of pH improved the dewatering performance of sludge, their effects were inferior to that of AS + Fe. The addition of AS and Fe2+ significantly reduced the specific resistance to filtration and capillary suction time of the sludge by 98.6 % and 95.5 %, respectively. This improvement in dewatering performance was achieved through the combined actions of bio-acidification, bio-oxidation, and bio-flocculation. Remarkably, under alkaline pH, microorganisms in AS remained active, leading to the formation of iron-based bioflocculants, along with a rapid pH decrease. These bioflocculants, in combination with protein (PN) in tightly bound extracellular polymeric substances (TB-EPS) through amide bonding, transformed TB-EPS from extractable to non-extractable form, reducing PN content from 12.1 mg g-1DS to 5.09 mg g-1DS and altering the protein's secondary structure. Consequently, the gel-like TB-EPS matrix effectively broke down, releasing cellular water and significantly enhancing sludge dewaterability.

Bioleaching of Cd from contaminated Helianthus annuus L. stalk and the safe utilization of its byproducts by Aspergillus niger.

Disposal and recycling of heavy metal-enriched biomass is the key to measure the success of phytoremediation. This study employed innovative approach to use Aspergillus niger (A. niger) for the treatment of Cd-contaminated Helianthus annuus L. (sunflower) stalk after phytoremediation. Single-factor results showed that the removal of Cd at an initial pH of 3 was superior to sucrose and inoculation amount. 67.67% of Cd was removed by A. niger leaching system after 11 days based on response surface methodology optimum conditions (sucrose: 76.266 g L-1; inoculation amount: 10%; initial pH: 3), while the concentrations of nitrogen, phosphorus and potassium (N, P and K) of sunflower stalk were unaffected. While physicochemical pretreatment effectively enhanced the bioleaching efficiency, it also resulted in significant loss of P and K elements, thereby reducing the value of biomass for recycling and utilization. Therefore, the direct A. niger leaching method without pretreatment is more advantageous for the safe treatment and recycling of Cd-contaminated sunflower stalks.

Enhancement of sludge dewaterability using combined technology of bioleaching and Fenton: Microscopic structure and hydrophilic/hydrophobic properties of sludge particles.

Bioleaching and Fenton technology are commonly used preconditioning techniques for sludge dewatering. This study compared the dewatering mechanisms of different conditioning technologies. The results showed that bound water, specific resistance to filtration (SRF), and capillary suction time decreased from 3.95 g/g, 6.16 × 1012 m/kg, and 130.6 s to 3.15 g/g, 2.81 × 1011 m/kg, and 33 s, respectively, under combined treatment condition. Moreover, the free radicals, including ·OH, O2-·and Fe (Ⅳ), further damaged the cell structure, thus increasing the concentration of DNA in the S-EPS layer. This intense degradation sludge particle size decreased by 15.6% and significantly increased zeta potential. Under the combined technology, the α-helix and ß-sheet decreased by 42.2% and 56.5%, respectively, destabilizing the spatial structure of proteins and promoting the release of bound water. In addition, the combined technology decreased (Ala/Lys) ratio in the TB-EPS layer by 67.6%, indicating the weakening of protein water-holding capacity. Moreover, the conversion of oxygen-containing compounds to nonpolar hydrocarbons increased the hydrophobicity of the sludge under a combined treatment, thus enhancing dewatering performance.

A highly efficient process to enhance the bioleaching of spent lithium-ion batteries by bifunctional pyrite combined with elemental sulfur.

Bioleaching technologies have been shown to be an environmentally friendly and economically beneficial tool for extracting metals from spent lithium-ion batteries (LIBs). However, conventional bioleaching methods have exhibited low efficiency in recovering metals from spent LIBs. Therefore, relied on the sustainability principle of using waste to treat waste, this study employed pyrite (FeS2) as an energy substance with reducing properties and investigated its effects in combination with elemental sulfur (S0) or FeSO4 on metals bioleaching from spent LIBs. Results demonstrated that the bioleaching efficiency was significantly higher in the leaching system constructed with FeS2 + S0, than in the FeS2 + FeSO4 or FeS2 system. When the pulp densities of FeS2, S0 and spent LIBs were 10 g L-1, 5 g L-1 and 10 g L-1, respectively, the leaching efficiency of Li, Ni, Co and Mn all reached 100%. Mechanistic analysis reveals that in the FeS2 + S0 system, the activity and acid-producing capabilities of iron-sulfur oxidizing bacteria were enhanced, promoting the generation of Fe (Ⅱ) and reducible sulfur compounds. Simultaneously, bio-acids were shown to disrupt the structure of the LIBs, thereby increasing the contact area between Fe (Ⅱ) and sulfur compounds containing high-valence metals. This effectively promoted the reduction of high-valence metals, thereby enhancing their leaching efficiency. Overall, the FeS2 + S0 bioleaching process constructed in this study, improved the leaching efficiency of LIBs while also effectively utilizing waste, providing technical support for the comprehensive and sustainable management of solid waste.

Enhanced bioleaching of spent Li-ion batteries using A. ferrooxidans by application of external magnetic field.

Recycling spent batteries is increasingly important for the sustainable use of Li-ion batteries (LIBs) and for countering the supply uncertainty of critical raw minerals (Li, Co, and Ni). Bioleaching, which uses microorganisms to extract valuable metals, is both economical and environmentally safe compared to other recycling methods, but its practical application is impaired by slow kinetics. Accelerating the process is a key for bioleaching spent LIBs on an industrial scale. Acidithiobacillus ferrooxidans (A. ferrooxidans), which thrives in extremely low pH conditions, has long been explored for bioleaching of spent LIBs. Metabolism of A. ferrooxidans involves the oxidation of magnetic Fe2+ and produces intracellular magnetic nanoparticles. The possibility of accelerating the leaching kinetics of A. ferrooxidans by the application of an external magnetic field is explored in this work. A weak static magnetic field is applied during the bioleaching of spent LIBs to recover Li, Ni, and Co using A. ferrooxidans. It is determined that 3 mT is the optimal field strength which allows the leaching efficiency of Li to reach 100% after only 2 days of leaching at a pulp density of 3 w/v % while without the external magnetic field, the leaching efficiency is limited to 57% even after 4 days. The leaching efficiency of Ni and Co also increases by nearly three-fold to >80% after 4 days of leaching. The proposed magnetic field-assisted bioleaching of spent LIBs using A. ferrooxidans substantially improves the leaching kinetics and thus the cost-effectiveness of the bioleaching process with minimal environmental impact, hence enabling environment-friendly recycling of raw materials that are increasingly becoming scarce. The positive effect of an external magnetic field on the metabolism of A. ferrooxidans demonstrated in this work provide a new set of tools to engineer the bioleaching process and the possibility for genetic modification of acidophile bacteria, especially targeted for magnetic enhancement.

Investigating the acidophilic microbial community's adaptation for enhancement indium bioleaching from high pulp density shredded discarded LCD panels.

As part of electronic waste (e-waste), the fastest growing solid waste stream in the world, discarded liquid crystal displays (LCDs) contain substantial amounts of both valuable and potentially harmful metal, offering valuable opportunities for resource extraction but posing environmental threats. The present comprehensive study is an investigation into the bioleaching of indium from discarded LCD panels, with a particular focus on high pulp density shredded (Sh-LCDs) and powdered (P-LCDs) materials. This study involved an acidophilic consortium, with two pathways, namely the mixed sulfur-iron pathways and sulfur pathways, being explored to understand the bioleaching mechanisms. Indium bioleaching efficiencies through the mixed sulfur-iron pathway were approximately 60% and 100% for Sh-LCDs and P-LCDs, respectively. Three mechanisms were involved in the extraction of indium from LCD samples: acidolysis, complexolysis, and redoxolysis. The microbial community adapted to a pulp density of 32.5 g/L was streak-plated and it was revealed that sulfur-oxizing bacteria dominated, resulting in the minimum indium extraction of 10% and 55% for both Sh-LCDs and P-LCDs samples, respectively. It was generally accepted that ferric ions as oxidants were effective for indium bioleaching from both the Sh-LCDs and P-LCDs. This implies that the cooperation or interaction within the microbial community used in the bioleaching process had a beneficial impact, enhancing the overall effectiveness of extracting indium from LCD panels. The adapted consortium utilizes a combination of microbial transformation, efflux systems, and chelation through extracellular substances to detoxify heavy metals. The adapted microbial community demonstrated better indium leaching efficiency (50%) compared to the non-adapted microbial community which achieved a maximum of 29% and 5% respectively from Sh-LCDs and P-LCDs at a pulp density of 32.5 g/L. The advantages of an adapted microbial community for indium leaching efficiency, attributing this advantage to factors such as high metabolic activity and improved tolerance to heavy metals. Additionally, the protective role of the biofilm formed by the adapted microbial community is particularly noteworthy, as it contributes to the community's resilience in the presence of inhibitory substances. This information is valuable for understanding and optimizing bioleaching processes for indium recovery, and by extension to possibly other metals.

Insights into metal tolerance and resistance mechanisms in Trichoderma asperellum unveiled by de novo transcriptome analysis during bioleaching.

This study investigates the genetic responses of the fungus Trichoderma asperellum (T. asperellum) during bioleaching of ore and tailing samples, comparing one-step, two-step, and spent media bioleaching processes. HPLC analysis quantified oxalic acid, citric acid, and propionic acids, with oxalic acid identified as the primary organic acid involved in metal bioleaching. Metal analysis revealed differences in recovery between ore and tailing samples and among bioleaching processes. The two-step bioleaching process yielded the highest zinc (>54%) and nickel (>60%) recovery in tailings and ore, respectively. Nickel's efficient recovery in ore bioleaching was attributed to the presence of manganese, while its precipitation as nickel oxalate in tailings hindered recovery. Additional metals such as Co, Mn, Mg, Cu, and As were also successfully recovered. Transcriptomic analyses showed significant upregulation of genes associated with biological processes and cellular components, particularly those related to cell membrane structure and function, indicating T. asperellum's adaptation to environmental stresses during metal bioleaching. These findings enhance our understanding of the diverse mechanisms influencing metal recovery rates in bioleaching processes.

Study on the role of microbial metabolites in in-situ noncontact bioleaching of ion-adsorption rare earth ore.

Ion adsorption rare earth ore nearly satisfy global market demand for heavy rare earth elements (HREEs). Bio-leaching has important potential for the clean and efficient extraction of ion-adsorption rare earth ore. However, the complexities of in-situ mining restrict the use of contact/direct bio-leaching, and non-contact/indirect bio-leaching would be the best choice. This study explore the potential of fermentation broths prepared by Yarrowia lipolytica (ATCC 30162) for the bio-leaching of ion-adsorption rare earth ore, and three typical metabolites (potassium citrate (K3Cit), sodium citrate (Na3Cit) and ammonium citrate ((NH4)3Cit) of Yarrowia lipolytica were further evaluated in simulated bioleaching (non-contact bioleaching) of ion-adsorption rare earth ore, including leaching behavior, seepage rule and rare earth elements (REEs) morphological transformation. The column leaching experiments shown that direct leaching of REEs using fermentation broths results in incomplete leaching of REEs due to the influence of impurities. Using the purified and prepared metabolites as lixiviant, REEs can be effectively extracted (leaching efficiency >90%) at cation concentration was only 10 % of the commonly used ammonium sulfate concentration (45 mM). Cation type had less effect on leaching efficiency. During the ion-adsorption rare earth ore leaching process, rare earth ions form a variety of complex chelates with citrate, thus transferring rare earth elements from the mineral surface to the leachate. Experimental results showed that pH and concentration together determined the type and form of rare earth chelates, which in turn affect the leaching behavior of REEs and solution seepage rule. This study helps to provide a theoretical basis for the regulation and enhancement of ion-adsorption rare earth ore non-contact bioleaching process.

Copper recovery from low-grade copper sulfides using bioleaching and its community structure succession in the presence of Sargassum.

Bioleaching characteristics and bacterial community structure were studied during low-grade copper sulfide ores bioleaching in the presence of pretreated Sargassum (PSM). Results indicated that proportion of attached bacteria and copper recovery were improved by using appropriate-dosage PSM. High copper recovery (82.99%) and low Fe3+ concentration were obtained when 150 mg L-1 PSM was used. Precipitation, such as KFe3(SO4)2(OH)6 and (H3O)Fe3(SO4)2(OH)6, was not found in samples used PSM according to XRD, FTIR and TG analyses, which may result from less passivation layer formed by Fe3+ hydrolysis. I- contained in PSM can act as the reductant to convert Fe3+ into Fe2+, which can reduce Fe3+ hydrolysis and adjust Eh value. Bacterial community structure was influenced significantly by PSM according to the 16 S rDNA analysis. Acidithiobacillus ferrooxidans dominated proportion of bacterial community throughout bioleaching process, whose proportion reached 89.1091% after 14 days in sample added 150 mg L-1 PSM.

Manganese promotes stability of natural arsenic sinks in a groundwater system with arsenic-immobilization minerals: Natural remediation mechanism and environmental implications.

Arsenic (As)-immobilizing iron (Fe)-manganese (Mn) minerals (AFMM) represent potential As sinks in As-enriched groundwater environments. The process and mechanisms governing As bio-leaching from AFMM through interaction with reducing bacteria, however, remain poorly delineated. This study examined the transformation and release of As from AFMM with varying Mn/Fe molar ratios (0:1, 1:5, 1:3, and 1:1) in the presence of As(V)-reducing bacteria specifically Shewanella putrefaciens CN32. Notably, strain CN32 significantly facilitated the bio-reduction of As(V), Fe(III), and Mn(IV) in AFMM. In systems with Mn/Fe molar ratios of 1:5, 1:3, and 1:1, As bio-reduction decreased by 28%, 34%, and 47%, respectively, compared to the system with a 0:1 ratio. This Mn-induced inhibition of Fe/As bio-reduction was linked to several concurrent factors: preferential Mn bio-reduction, reoxidation of resultant Fe(II)/As(III) due to Mn components, and As adsorption onto emergent Fe precipitates. Both the reductive dissolution of AFMM and the bio-reduction of As(V) predominantly controlled As bio-release. Structural equation models indicated that reducing bacteria destabilize natural As sinks more through As reduction than through Mn(II) release, Fe reduction, or Fe(II) release. Systems with Mn/Fe molar ratios of 1:5, 1:3, and 1:1 showed a decrease in As bio-release by 24%, 41%, and 59%, respectively, relative to the 0:1 system. The observed suppression of As bioleaching was ascribed to both the inhibition of As/Fe bio-reduction by Mn components and the immobilization of As by freshly generated Fe precipitates. These insights into the constraining effect of Mn on the biotransformation and bioleaching of As from AFMM are crucial for grasping the long-term stability of natural As sinks in groundwater, and enhance strategies for in-situ As stabilization in As-afflicted aquifers through Nature-Based Solutions.

Microbial recovery of rare earth elements from various waste sources: a mini review with emphasis on microalgae.

Rare Earth Elements (REEs) are indispensable in contemporary technologies, influencing various aspects of our daily lives and environmental solutions. The escalating demand for REEs has led to increased exploitation, resulting in the generation of diverse REE-bearing solid and liquid wastes. Recognizing the potential of these wastes as secondary sources of REEs, researchers are exploring microbial solutions for their recovery. This mini review provides insights into the utilization of microorganisms, with a particular focus on microalgae, for recovering REEs from sources such as ores, electronic waste, and industrial effluents. The review outlines the principles and distinctions of bioleaching, biosorption, and bioaccumulation, offering a comparative analysis of their potential and limitations. Specific examples of microorganisms demonstrating efficacy in REE recovery are highlighted, accompanied by successful methods, including advanced techniques for enhancing microbial strains to achieve higher REE recovery. Moreover, the review explores the environmental implications of bio-recovery, discussing the potential of these methods to mitigate REE pollution. By emphasizing microalgae as promising biotechnological candidates for REE recovery, this mini review not only presents current advances but also illuminates prospects in sustainable REE resource management and environmental remediation.

Promoting dewatering efficiency of sludge by bioleaching coupling chemical flocculation.

In recent years, bioleaching has emerged as a cost-effective technology for enhancing the dewaterability of sludge. However, the lengthy treatment time involved in sludge bioleaching processes limits daily treatment capacity for sludge. Here, a novel approach was developed through a short time of sludge bioleaching with A. ferrooxidans LX5 (A. f) and A. thiooxidans TS6 (A. t) followed by polyferric sulfate (PFS) flocculation (A. f + A. t + PFS). After 12.5 h of the A. f + A. t + PFS treatment (30% A. f, 10% A. t, 40 mg/g DS S0, 60 mg/g DS FeSO4•7H2O, and 120 mg/g DS PFS), the reduction efficiency of specific resistance to filtration (SRF) and sludge cake moisture content reached 94.0% and 11.6%, respectively, which were comparable to the results achieved through 24 h of completed bioleaching treatment. In pilot-scale applications, the mechanical dewatering performance was notably improved following A. f + A. t + PFS treatment, with the low moisture content of the treated sludge cake (∼59.2%). This study provides new insights into the A. f + A. t + PFS process and holds potential for developing efficient and promising sludge dewatering strategies in engineering application.

E-waste management, treatment options and the impact of heavy metal extraction from e-waste on human health: Scenario in Vietnam and other countries.

Ho Chi Minh (HCM) City is the most important urban region of Vietnam, Southeast Asia. In recent times, the quantity of electronic waste (e-waste) has been growing by several thousand tonnes every year. In this research, some of the existing and developing technologies being employed for the recycling of e-waste have been reviewed. Accordingly, the paper has been divided into three sections namely, e-waste treatment technologies in Ho Chi Minh City, the effect of heavy metals on human health and the extraction of metals from e-waste using pyrolysis, hydrometallurgy, bioleaching, mechanical, and air classifier methods, respectively. The extraction of precious metals and heavy metals such as Cd, Cr, Pb, Hg, Cu, Se, and Zn from e-waste can be hazardous to human health. For example, lead causes hazards to the central and peripheral nervous systems, blood system and kidneys; copper causes liver damage; chronic exposure to cadmium ends up causing lung cancer and kidney damage, and mercury can cause brain damage. Thus, this study examines the key findings of many research and review articles published in the field of e-waste management and the health impacts of metal pollution.

Regulatory-systemic approach in Aspergillus niger for bioleaching improvement by controlling precipitation.

In the context of e-waste recycling by fungal bioleaching, nickel and cobalt precipitate as toxic metals by oxalic acid, whereas organic acids, such as citric, act as a high-performance chelating agent in dissolving these metals. Oxalic acid elimination requires an excess and uneconomical carbon source concentration in culture media. To resolve this issue, a novel and straightforward systems metabolic engineering method was devised to switch metabolic flux from oxalic acid to citric acid. In this technique, the genome-scale metabolic model of Aspergillus niger was applied to predicting flux variability and key reactions through the calculation of multiple optimal solutions for cellular regulation. Accordingly, BRENDA regulators and a novel molecular docking-oriented approach were defined a regulatory medium for this end. Then, ligands were evaluated in fungal culture to assess their impact on organic acid production for bioleaching of copper and nickel from waste telecommunication printed circuit boards. The protein structure of oxaloacetate hydrolase was modeled based on homology modeling for molecular docking. Metformin, glutathione, and sodium fluoride were found to be effective as inhibitors of oxalic acid production, enabling the production of 8100 ppm citric acid by controlling cellular metabolism. Indirect bioleaching demonstrated that nickel did not precipitate, and the bioleaching efficiency of copper and nickel increased from 40% and 24% to 61% and 100%, respectively. Bioleaching efficiency was evaluated qualitatively by FE-SEM, EDX, mapping, and XRD analysis. KEY POINTS: • A regulatory-systemic procedure for controlling cellular metabolism was introduced • Metformin inhibited oxalic acid, leading to 8100 ppm citric acid production • Bioleaching of copper and nickel in TPCBs improved by 21% and 76.

Microflow injection analysis based on modular 3D platforms and colorimetric detection for Fe(III) monitoring in a wide concentration range.

A modular microflow injection analysis (microFIA) system for the determination of Fe(III) in a bioleaching reactor has been designed, developed and validated. The different modules of the analyzer (mixer, diluter, disperser and detector) were 3D-printed. Fe(III) quantification is due by measuring the color intensity of the chelate formed between Fe(III) and salicylic acid at 525 nm. The device has been designed to dilute, disperse and detect high Fe(III) concentrations in the form of an inexpensive multi-step photometric flow cell that uses an light-emitting diode (LED) as a light source and an light-dependent resistor (LDR) as a light intensity detector. This microFIA system has been shown to be suitable for automatic and continuous determination of Fe(III) in the operation of a bioreactor for the oxidation of Fe(II). The device has a good repeatability (less than 5% of coefficient of variation in the whole range of concentrations) and accuracy of around 100%. The analyzer features an exceptional wide linear range, between 25 and 6000 mg·L-1. The device was successfully applied to the determination of Fe(III) in real samples. The obtained results proved that the method is applicable for accurate, precise, rapid, and low-cost colorimetric analysis and didn't show significant differences with a conventional UV-Vis method.