How infants predict respect-based power.

Research has shown that infants represent legitimate leadership and predict continued obedience to authority, but which cues they use to do so remains unknown. Across eight pre-registered experiments varying the cue provided, we tested if Norwegian 21-month-olds (N=128) expected three protagonists to obey a character even in her absence. We assessed whether bowing for the character, receiving a tribute from or conferring a benefit to the protagonists, imposing a cost on them (forcefully taking a resource or hitting them), or relative physical size were used as cues to generate the expectation of continued obedience that marks legitimate leadership. Whereas bowing sufficed in generating such an expectation, we found positive Bayesian evidence that all the other cues did not. Norwegian infants unlikely have witnessed bowing in their everyday life. Hence, bowing/prostration as cue for continued obedience may form part of an early-developing capacity to represent leadership built by evolution.

Correction of anterior bowing complicating tibial osteofibrous dysplasia in preadolescents by osteotomy and telescopic nailing without lesional resection: a preliminary study of four-case reports.

BACKGROUND: Osteofibrous dysplasia (OFD) occurs most frequently in the tibia and may result in deformity and pathological fracture. Surgical treatment such as curettage or segment excision has been performed but remains controversial due to high complication rates and surgical burden. This study introduces a new method to manage OFD with anterior bowing of the tibia using minimally invasive tibial osteotomy and telescopic rod (TR) osteosynthesis without extensive lesion resection. METHODS: A retrospective study of 4 children with OFD and tibia bowing deformity treated with minimally invasive tibial wedge osteotomy and TR fixation between January 2015 and November 2020 was performed. Results including bone healing, complications, function based on MSTS score, and recurrance of deformity were assessed. RESULTS: The median follow-up was 29 months. Radiographs showed the median time for union was 3 months. There were no instances of refracture or recurrence of deformity. The mean post-operative MSTS score was significantly higher than preoperative score. CONCLUSIONS: This method avoids large bone defects and reconstructive procedures. It is an effective and minimally invasive approach for managing anterior bowing deformity secondary to OFD while improving function and quality of life. LEVEL OF EVIDENCE: Level IV; Case Series; Treatment Study.

Real-Time Visual Feedback Based on MIMUs Technology Reduces Bowing Errors in Beginner Violin Students.

Violin is one of the most complex musical instruments to learn. The learning process requires constant training and many hours of exercise and is primarily based on a student-teacher interaction where the latter guides the beginner through verbal instructions, visual demonstrations, and physical guidance. The teacher's instruction and practice allow the student to learn gradually how to perform the correct gesture autonomously. Unfortunately, these traditional teaching methods require the constant supervision of a teacher and the interpretation of non-real-time feedback provided after the performance. To address these limitations, this work presents a novel interface (Visual Interface for Bowing Evaluation-VIBE) to facilitate student's progression throughout the learning process, even in the absence of direct teacher intervention. The proposed interface allows two key parameters of bowing movements to be monitored, namely, the angle between the bow and the string (i.e., α angle) and the bow tilt (i.e., ß angle), providing real-time visual feedback on how to correctly move the bow. Results collected on 24 beginners (12 exposed to visual feedback, 12 in a control group) showed a positive effect of the real-time visual feedback on the improvement of bow control. Moreover, the subjects exposed to visual feedback judged the latter as useful to correct their movement and clear in terms of the presentation of data. Although the task was rated as harder when performed with the additional feedback, the subjects did not perceive the presence of a violin teacher as essential to interpret the feedback.

Lengthening in congenital posteromedial bowing of tibia: a follow-up series at skeletal maturity.

PURPOSE: Congenital posteromedial bowing (CPMB) of tibia is a rare, usually self-resolving condition that is present at birth. The data on the long-term outcome of lengthening, choice of fixator, outcome in early and late age groups, and complications is sparse, hence the need for this study. METHODS: This retrospective study included 93 patients with 94 affected legs from 1991 to 2023. The patients were categorized into early (under 10 years) and late (10 years or above) intervention groups. Eighteen patients with nineteen lengthening episodes who attained skeletal maturity made the basis of this study and will be discussed in detail. RESULTS: The outcome for the lengthening group at maturity was satisfactory, with 5.53 cm of average length gained per lengthening episode, a mean LLD of 0.31 cm at final follow-up, a mean age of 23.63 years (range 14-38 years), and an average follow-up of 12.51 years (range 3-28 years) post-lengthening, but the procedure was associated with difficulties like ankle stiffness, tibial valgus, pin tract infections, and fractures through regenerate. CONCLUSION: This study represents a large single-centre series on CPMB. We recommend that surgery for lengthening should be done at an older age, close to skeletal maturity, wherever possible to reduce the risk of repeat lengthening procedures. Based on our experience, we recommend the use of a circular fixator. Uniplanar distractors should have an adequate number and spread of Schanz screws in each segment to reduce the risk of valgus malalignment of distracting segments of bone.

Effect of coaching the sit-to-stand motion and attentional focus.

[Purpose] The present study investigated whether (1) "standing up while bowing" is effective for promoting the sit-to-stand (STS) motion and (2) whether this coaching promotes internal focus. [Participants and Methods] The participants included 17 healthy adults who performed the 30-s chair stand test with two sets of verbal instructions. The verbal instructions were as follows: "Please stand up as many times as possible for 30 s" (control condition) and "Please stand up while bowing as many times as possible for 30 s" (bowing condition). The participants performed the tests successively under the two conditions. In the 30-s chair stand test, a three-axis accelerometer was attached to the participants and the sagittal STS motion was filmed using a video camera. After the 30-s chair stand test, we used the modified Movement-Specific Reinvestment Scale (MSRS) to evaluate attentional focus. Differences in the measurements were analyzed using the Wilcoxon signed-rank test or paired t-test for each condition. [Results] Statistical analysis revealed significant differences in the CS-30 count, time from sitting to standing, time from sitting to lift-off, time from lift-off to standing, and the trunk tilt angle on lift-off. Regarding the questionnaire, Statistical analysis revealed significant differences in the MSRS and "conscious motor processing". [Conclusion] These results suggest that "standing up while bowing" has limited effectiveness in promoting the STS motion because the coaching promotes internal focus.

A Case of Acute Plastic Deformation of the Forearm in a Medieval Hispano-Mudejar Skeleton (13-14th Centuries AD).

INTRODUCTION: Acute plastic deformation refers to a traumatic bending or bowing without a detectable cortical defect. CASE PRESENTATION AND DISCUSSION: We describe a rare case from an individual that was exhumed from the Hispano-Mudejar necropolis in Uceda (Guadalajara, Spain) dated between the 13th and 14th centuries AD. The case corresponds to an adult woman, with a bowing involvement of the left ulna and radius. After making the differential diagnosis with various pathologies likely to present with this alteration, we reached the diagnosis of acute plastic deformation of the forearm through external and radiological examination and comparison with the healthy contralateral forearm. CONCLUSIONS: Acute plastic deformation is a rare traumatic injury, not described until the last century and only rarely described in palaeopathological contexts. We contribute a new case, the first being sufficiently documented, contributing to the knowledge and diagnosis of this type of trauma in the ancient bone, while deepening the knowledge of the living conditions of the medieval Mudejar population of Uceda.

Proximal external femoral torsion increases lateral femoral shaft bowing: a study based on 3D CT reconstruction models.

PURPOSE: Femoral bowing influences the genesis and management of knee osteoarthritis (OA). The aim of this study was to investigate the relationship between the femoral torsion angle (FTA) and femoral bowing angle (FBA) in a southern Chinese population. It was hypothesized that a greater FTA would lead to a greater lateral FBA. METHODS: A total of 381 lower extremities from 381 osteoarthritic patients (298 women, 83 men; 201 left, 180 right; mean age 66.5 ± 8.9 years) were retrospectively reviewed. Age, sex, body mass index (BMI), side, height, femoral length (FL), hip-knee-ankle angle (HKA) and FTA were set as FBA-related factors. The three-dimensional (3D) FBA, the angle between the anatomical axis of the proximal femur and the anatomical axis of the distal femur in the plane they form, and its projection on the coronal (lateral FBA) and sagittal (anterior FBA) planes were measured on 3D computed tomography (CT) models. The correlation of the 3D, lateral and anterior FBAs with each of the FBA-related factors was explored using multiple linear regression analysis. The correlation between the FBA and FTA was explored and verified after using propensity score matching to control for the other FBA-related factors. RESULTS: The mean lateral and anterior FBAs were 5.5°, with 53.5% greater than 5°, and 12.7°, with 70.3% greater than 11°, respectively. 3D FBA was positively correlated with age (Std.Co = 0.113, P < 0.05) and HKA (Std.Co = 0.129, P < 0.05). Lateral FBA was positively correlated with age (Std.Co = 0.118, P < 0.05), female sex (Std.Co = 0.206, P < 0.05), HKA (Std.Co = 0.184, P < 0.05) and FL (Std.Co = 0.220, P < 0.05). Anterior FBA was positively correlated with age (Std.Co = 0.108, P < 0.05) and male sex (Std.Co = 0.108, P < 0.05). When the related factors were balanced between the two groups (NS), FTA did not significantly affect 3D FBA or anterior FBA (NS), while FTA was positively correlated with lateral FBA (Std.Co = 0.165, P < 0.05). CONCLUSION: External torsion of the proximal femur increases the lateral FBA by twisting a partial anterior FBA into a lateral FBA, especially in the female population. If a patient is found to have a large lateral FBA preoperatively, one should be alert to the possibility of a concomitant large FTA, as there are implications for femoral orthopedics, TKA and patellofemoral pressure distribution. LEVEL OF EVIDENCE: III.

Effect of anterior tibial bowing on measurement of posterior tibial slope on conventional X-rays.

PURPOSE: The posterior tibial slope (PTS) has different biomechanical effects on the knee. Especially in revision ACL reconstruction, a precise analysis is essential. Therefore, we investigate the influence of the anterior tibial bowing angle on the posterior slope measurement. Our hypothesis of the present study is that the short tibial X-rays underestimate the PTS in cases with increased anterior bowing of the tibia. METHODS: The PTS was measured on 162 true longitudinal radiographs of the complete tibia (lateral mechanic axis). The average age of the patients was 35.7 years (range 19-59 years) and the most common diagnosis was failed anterior cruciate ligament reconstruction. Using this X-ray, the slope on the short axis and the slope on the entire axis were measured. In addition, the angle of the anterior bowing was determined. RESULTS: The mean PTS for the lateral mechanic axis of the tibia was 10.6° (± 3.5) in contrast to 11.6° (± 3.5) for the short tibial axis. These two measurements differ significantly. (p < 0.001). The mean anterior tibial bowing angle on the lateral X-rays of the whole tibia was 2.3° (± 2.0). There is a significant positive, relationship between tibial bowing angle and PTS as referenced by the lateral mechanic axis (Spearman's correlation, r = 0.273 and p < 0.001). CONCLUSION: With increasing anterior tibial bowing, the posterior tibial slope on the short knee radiograph is underestimated compared to the slope measurement on the lateral mechanic axis.

Risk Factors Associated with Intraoperative Iatrogenic Fracture in Patients Undergoing Intramedullary Nailing for Atypical Femoral Fractures with Marked Anterior and Lateral Bowing.

Background and objectives: Iatrogenic fractures are potential complications during intramedullary (IM) nailing for atypical femoral fractures (AFFs). The risk factors associated with iatrogenic fractures remain unclear, although excessive femoral bowing and osteoporosis are hypothesized to be contributing factors. The present study aimed to determine the risk factors for the occurrence of iatrogenic fractures during IM nailing in patients with AFFs. Materials and Methods: This retrospective cross-sectional study evaluated 95 patients with AFF (all female; age range: 49-87 years) who underwent IM nailing between June 2008 and December 2017. The patients were divided into two groups: Group I (with iatrogenic fracture: n = 20) and Group II (without iatrogenic fracture: n = 75). Background characteristics were retrieved from medical records and radiographic measurements were obtained. Univariate and multivariate logistic regression analyses were performed to identify risk factors for the occurrence of intraoperative iatrogenic fractures. Receiver operating curve (ROC) analysis was conducted to determine a cut-off value for the prediction of iatrogenic fracture occurrence. Results: Iatrogenic fractures occurred in 20 (21.1%) patients. The two groups exhibited no significant differences regarding age and other background characteristics. Group I exhibited significantly lower mean femoral bone mineral density (BMD) and significantly greater mean lateral and anterior femoral bowing angles than Group II (all p < 0.05). There were no significant differences in AFF location, nonunion, and IM nail diameter, length, or nail entry point between the two groups. In the univariate analysis, femoral BMD and lateral bowing of the femur differed significantly between the two groups. On multivariate analysis, only lateral bowing of the femur remained significantly associated with iatrogenic fracture occurrence. The ROC analysis determined a cut-off value of 9.3° in lateral bowing of the femur for prediction of iatrogenic fracture occurrence during IM nailing for AFF treatment. Conclusions: The lateral bowing angle of the femur is an important predictive factor for intraoperative iatrogenic fracture occurrence in patients undergoing IM nailing for AFF treatment.

Femoral bowing affects varus femoral alignment but not patient satisfaction in mechanically aligned total knee arthroplasty.

PURPOSE: This study evaluated whether patients with particular lower limb morphological factors have femoral and tibial component malpositioning during mechanically aligned total knee arthroplasty (TKA) and lower postoperative satisfaction. METHODS: This study included 146 knees in 117 Asian patients undergoing TKA for medial osteoarthritis. Preoperative bony morphological factors such as the angle between the femoral mechanical and anatomical axes (MA-AA angle), angle between the anatomical axes of the proximal and distal femur (lateral bowing femoral angle, LBFA), mechanical lateral distal femoral angle, medial proximal tibial angle, and % anatomical axis of the tibia were evaluated, as well as preoperative and 1-year postoperative 2011 Knee Society scores (KSSs). RESULTS: MA-AA angle and LBFA were significantly larger in knees with varus femoral component alignment versus neutral alignment. Preoperative MA-AA angle was underestimated in patients with larger MA-AA angle or LBFA, especially by inexperienced surgeons. Tibial morphological factors did not affect tibial component alignment. Changes in 2011 KSSs were similar among groups by lower limb alignment or femoral and tibial component alignment. CONCLUSION: Femoral bowing affects varus femoral component alignment by obscuring preoperative planning, but it had little impact on patient satisfaction when mechanical alignment is targeted during TKA.

Sagittal femoral bowing contributes to distal femoral valgus angle deviation in malrotated preoperative radiographs.

BACKGROUND: The coronal whole-leg radiograph is generally used for preoperative planning in total knee arthroplasty. The distal femoral valgus angle (DFVA) is measured for distal femoral bone resection using an intramedullary guide rod. The effect of coronal and sagittal femoral shaft bowing on DFVA measurement in the presence of malrotation or knee flexion contracture has not been well reported. The objectives of this study were: (1) to investigate the effects of whole-leg malrotation and knee flexion contracture on the DFVA in detail, (2) to determine the additional effect of coronal or sagittal femoral shaft bowing. METHODS: We studied 100 consecutive varus and 100 valgus knees that underwent total or unicompartmental knee arthroplasty. Preoperative CT scans were used to create digitally reconstructed radiography (DRR) images in neutral rotation (NR, parallel to the surgical epicondylar axis), and at 5° and 10° external rotation (ER) and internal rotation (IR). The images were also reconstructed at 10° femoral flexion. The DFVA was evaluated in each DRR image, and the angular variation due to lower limb malposition was investigated. RESULTS: The DFVA increased as the DRR image shifted from IR to ER, and all angles increased further from extension to 10° flexion. The DFVA variation in each position was 1.3° on average. A larger variation than 2° was seen in 12% of all. Multivariate regression analysis showed that sagittal femoral shaft bowing was independently associated with a large variation of DFVA. Receiver operating characteristic analysis showed that more than 12° of sagittal bowing caused the variation. CONCLUSION: If femoral sagittal bowing is more than 12°, close attention should be paid to the lower limb position when taking whole-leg radiographs. Preoperative planning with whole-leg CT data should be considered.

Successful Treatment of Atypical Femoral Fracture with Bowed Femur Using Contralateral Intramedullary Nail Combined with Early Daily Teriparatide.

We report a case of atypical femoral fracture achieving early fracture union with combination therapy comprising contralateral nail and immediate teriparatide injection. Fracture union of atypical fractures is often delayed due to bowing deformity and bone metabolic disorders. Combination treatment that takes both problems into consideration represents a useful treatment option for atypical femoral fracture.

Native tibia valga: a potential source of varus malreduction during intramedullary tibial nail fixation of tibial shaft fractures.

PURPOSE: To determine the effect of native tibia valga on intramedullary nail (IMN) fixation of tibial shaft fractures. METHODS: Retrospective comparative cohort analysis of 110 consecutive patients with tibial shaft fractures undergoing IMN fixation at an urban level one trauma centre was performed. Medical records and radiographs were reviewed for demographics, tibia centre of rotation of angulation (CORA), nail starting point, incidence of varus malreduction, and nail/canal proportional fit. RESULTS: Tibia valga (CORA of ≥ 3 degrees) was present in 37 (33.6%) patients. The anatomic nail starting point distance (in relation to the lateral tibial spine) was significantly greater in the tibia valga group (12.0 mm vs. 5.0 mm, mean difference: 7.1 mm, 95% CI: 5.8 to 8.3 mm, p < 0.0001). Varus malreduction was more common in the tibia valga group (10.8% vs. 1.4%, proportional difference: 9.4%, 95% CI: - 1.0 to 21.3%, p = 0.04). Varus malreduction in the tibia valga group was associated with a decreased nail width/inner canal width proportion on multivariate analysis (OR = 0.683, 95% CI: 0.468 to 0.995, p = 0.0004). CONCLUSION: Native tibia valga is common, and the use of a standard coronal IMN starting point with poor nail fit can lead to iatrogenic varus malreduction. In patients with tibia valga, maximizing nail fit or utilization of a medial starting point should be considered.

Screw Length Associated With Fracture Gapping of Fifth Metatarsal Base Fracture With Intramedullary Screw Fixation: A Cadaveric Study.

Intramedullary screw fixation is a well-established surgical treatment for fifth metatarsal Jones fractures, due to its minimally invasive nature, and potential early return to activity. Due to the curvature of the fifth metatarsal, optimal length of the screw is needed to prevent gapping at the fracture site. The placement of a straight screw induces straightening of a naturally curved bone. The purpose of this study was to aid surgeons in determining an appropriate screw length for intramedullary fixation of a fifth metatarsal Jones fracture in order to prevent fracture gapping. A transverse osteotomy of the fifth metatarsal was made in 10 cadaver specimens at the level of a traditional Jones fracture. Inserted screws were sequentially increased in length until plantar gapping at the fracture site was noted. The angle (degree) of plantar gapping was measured with each increase in screw length and diameter. The mean length of the cadaveric fifth metatarsals was 73.76 mm (range 67.42-81.73). The mean screw length that caused gapping at the fracture site was 49.89 mm (range 44-55), representing 67.05% (range 61.26-75.35) of the fifth metatarsal length. The correlation coefficient revealed that gapping of the fracture site is most likely to occur when the screw length is 66% the length of the metatarsal length (rs = 0.66; 95% confidence interval: 0.06-0.91; p = .04). The angle of the initial gapping was 2.85° (range 2°-4°). With an incremental increase in screw length, the angle was 3.85° (range 3°-6°), and with an incremental increase in screw diameter, the angle was 3.70° (range 2°-5°). Our study demonstrated that screw lengths exceeding 66% of the metatarsal length lead to plantar fracture gapping. Additionally, gapping was accentuated with larger diameter screws due to angle variance.

Population-based, three-dimensional analysis of age- and sex-related femur shaft geometry differences.

This study deals with differences of femoral geometric focus on the bowing and width. Analysis using three-dimensional skeletonization showed increase of femoral bowing and femur width over life (more in women), and widening of the medullary canal only in women after 50 years old, not in men. INTRODUCTION: The changes in femur geometry that occur with aging and lead to fragility or insufficiency fracture remain unclear. The role of the lower limb geometry, including the femur and femoral bowing, has become a point of discussion, especially in atypical femur fracture. This study aimed to analyze femur shaft geometry using three-dimensional skeletonization. METHODS: We acquired computed tomography images of both femurs obtained. A total of 1400 age- and sex-stratified participants were enrolled and were divided into subgroups according to age (by decade) and sex. The computed tomography images were used to produce 3-dimensional samplings of anatomical elements of the human femur using reconstruction and parametrization from these datasets. The process of skeletonization was conducted to obtain compact representation of the femur. With the skeletonization, we were able to compare all parameters according to age and sex. RESULTS: The femur length was 424.4 ± 28.6 mm and was longer in men (P < 0.001). The minimum diameter of the medullary canal was 8.9 ± 2.0 mm. The radius of curvature (ROC) was 906.9 ± 193.3 mm. Men had a larger femur length, femur outer diameter, and the narrowest medullary diameter (P < 0.001, respectively). Women had significantly smaller ROC (P < 0.001). ROC decreased by 19.4% in men and 23.6% in women between the ages of 20 to 89 years. Femur width increased over life by 11.4% in men and 24.5% in women. Between the ages of 50 and 89 years, the medullary canal appears to have increased by 32.7% in women. CONCLUSION: This geometry analysis demonstrated that femoral bowing and femoral width increased related to aging, and that the medullary canal widened after the age of 50 years in women. This cross-sectional study revealed important age- and sex-related differences in femur shaft geometry that occur with aging.

Total knee arthroplasty in femoral bowing: does patient specific instrumentation have something to add? A randomized controlled trial.

BACKGROUND: Patient-specific instrumentation (PSI) proponents have suggested the benefits of improved component alignment and reduced outliers. In this randomized controlled trial, we attempted to assess the advantage of using PSI over conventional intermedullary (IM) guides for primary total knee arthroplasty (TKA) with bilateral severe femoral bowing (> 5°). A parallel trial design was used with 1:1 allocation. We hypothesize that PSI would support more accurate alignment of components and the lower-limb axis during TKA with severe femoral bowing in comparison with conventional IM guides. METHODS: Among 336 patients undergoing bilateral TKAs due to knee osteoarthritis, 29 patients with bilateral lateral femoral bowing of more than 5° were included in this study. Every patient was assigned randomly to PSI on one side and to conventional instrumentation lateralization of the entry point of the femoral IM guide was applied on the other with a goal of neutral mechanical alignment. The assessment of coronal alignment was completed by measuring the hip-knee-ankle (HKA) angle on preoperative and postoperative long film standing radiographs. Coronal and sagittal orientations of femoral and tibial components were assessed on weight-bearing radiographs. The rotational alignment of the femoral component was evaluated using computed tomography. RESULTS: The postoperative mean ± standard deviation (SD) HKA angle was varus 4.0° (± 2.7°) for conventional technique and varus 4.1° (± 3.1°) for PSI, with no differences between the two groups (p = 0.459). The component orientation showed no significant differences except with respect to the sagittal alignment of the femoral component (p = 0.001), with a PSI mean ± SD flexion of 5.8° (± 3.7°) and a conventional method mean ± SD flexion of 3.2° (± 2.5°), due to the intentional 3° flexion incorporated in the sagittal plane to prevent femoral notching in PSI planning. Computed tomography assessment for rotational alignment of the femoral components showed no difference between the two groups concerning the transepicondylar axis (p = 0.485) with a PSI mean ± SD external rotation of 1.5° (± 1.3°) and conventional mean ± SD external rotation of 1.5° (± 1.6°). CONCLUSION: PSI showed no advantage over lateralization of the femoral entry for IM guidance. LEVEL OF EVIDENCE: 1 TRIAL REGISTRATION: Registered on US national library of medicine ClinicalTrials.gov ( NCT02993016 ) on December 12th 2016.

Coronal shaft bowing of the femur affects varus inclination of the surgical transepicondylar axis in varus knee osteoarthritis.

PURPOSE: This study investigated the relationship between femoral shaft bowing and the orientation of the surgical transepicondylar axis (TEA) in the coronal plane in varus knee osteoarthritis (OA). METHODS: A total of 82 knees scheduled to undergo total knee arthroplasty (TKA) for the treatment of varus knee OA were enrolled. The hip-knee-ankle angle (HKA) was measured preoperatively on anteroposterior whole-leg standing radiographs. The lateral angle between the TEA and the mechanical axis of the femur (MA-TEA) was measured in the coronal plane from preoperative computed tomography (CT) images. Femoral shaft bowing was measured on CT images. Pearson's correlation coefficient was used to examine the correlation of the MA-TEA with the HKA and femoral shaft bowing. RESULTS: The MA-TEA correlated negatively with the HKA (r = - 0.321, P < 0.01) and positively with femoral shaft bowing (r = 0.415, P < 0.01). CONCLUSIONS: The TEA changed to varus as femoral shaft bowing increased in patients with varus knee OA. This suggests that the TEA is not always the centre of the rotational axis of the femur after TKA. In addition, the TEA may not be useful as a consistent parameter in the coronal plane in patients with increasing femoral shaft bowing. LEVEL OF EVIDENCE: III.

Straight nail insertion through a laterally shifted entry for diaphyseal atypical femoral fractures with bowing: good indications and limitations of this technique.

PURPOSE: Inserting a straight (piriformis fossa entry) nail through the tip of the greater trochanter has been used for treating atypical femoral fractures (AFFs) with bowing. This study aimed to determine what degree of bowing can be successfully treated using a laterally shifted entry technique. METHODS: Twenty-three complete and six incomplete diaphyseal AFFs treated using the shifted entry technique were retrospectively analysed. Radiologic parameters and complications were evaluated. The complete AFFs were divided into two groups based on the severity of preoperative bowing: grade 0-II bowing and < 20° lateral bowing (minimal/moderate) and grade III bowing or ≥ 20° lateral bowing (severe). Comparison according to postoperative malalignment, a change of lateral or anterior bowing ≥ 5° was also performed. RESULTS: Three complete AFFs in the minimal/moderate group showed malalignment, as did all in the severe group (p < 0.001). The change of bowing was greater for the severe group in lateral and anterior bowing (p = 0.004 and 0.001, respectively). A greater fracture gap was found on AP and lateral radiographs in the severe group (p = 0.044 and 0.026, respectively). In the comparison according to postoperative malalignment, a significant difference was found for the percentage of severe deformity (p < 0.001). All incomplete AFFs were united without complication. CONCLUSION: Diaphyseal AFFs with grade 0-II bowing and < 20° anterior bowing were treated successfully by the shifted entry technique. However, postoperative malalignment was found in all cases of AFFs with severe bowing. Therefore, other techniques should be considered for AFFs with grade III bowing or ≥ 20° anterior bowing.

Clinical outcomes of using contralateral-side laterally bent intramedullary nails in atypical femur fractures with femoral bowing.

INTRODUCTION: This study aimed to evaluate the clinical outcomes of using contralateral-side laterally bent intramedullary nails (IMNs) in bowed atypical femur fractures (AFFs). MATERIALS AND METHODS: We retrospectively reviewed bowed AFFs treated with contralateral-side laterally bent IMNs. In total, 20 patients with 25 cases of AFFs were included. Surgical outcomes including bone union time, complications, femoral bowing, and leg length discrepancy (LLD) were evaluated. We evaluated the surgical safety of performing contralateral-side intramedullary nailing with its intraoperative and postoperative complications and compared the LLD. RESULTS: The average age was 76.8 years (range 67-86 years), and all of patients were female. There were 10 cases of complete AFFs and 15 cases of incomplete AFFs. Fourteen patients (70%) had a history of bisphosphonate (BP) use with an average of 74.5 months of its use. In the complete AFF cases, reduction of the fractures was tried to restore the patients' normal anatomical geometry. The average lateral gap was 0.6 mm (0-1 mm), and the average medial gap was 1.6 mm (1-3 mm). All cases achieved bone union without secondary intervention. There were no intraoperative fractures or postoperative complications. The average bone union time was 22.0 weeks and 9.2 weeks in complete and incomplete AFFs, respectively. The average preoperative femoral bowing seen in the coronal and sagittal planes was 10.1° and 16.1°, respectively, while the average postoperative bowing was 6.6° and 11.3°, respectively. The average change of angle was 3.5° in the coronal plane and 4.8° in the sagittal plane. The mean change of LLD was 5.7 mm. CONCLUSION: The use of contralateral-side laterally bent IMNs in treating bowed femurs showed excellent clinical outcomes without complications. In severely bowed femurs, this technique can be safe and useful.

Percutaneous Bunionette Correction Without Fixation: Clinical Results and Radiographic Evaluations Including Rotation of Metatarsal Head and Sagittal Angle Change of Fifth Metatarsal.

Bunionette deformities have been treated as an analog of hallux valgus, and the surgical techniques are similar. Most commonly anteroposterior image is evaluated pre- and postoperatively. To our knowledge, only one study has evaluated changes on the lateral radiograph and no study has evaluated changes in rotation of the fifth metatarsal head postoperatively. In percutaneous bunionette correction using a burr for osteotomy, shortening of the fifth metatarsal and elevation of the metatarsal head are inevitable. Without fixation, there is also a possibility of rotational change to the metatarsal head. We measured parameters on anteroposterior and lateral weightbearing radiographs in 18 feet pre- and postoperatively. Rotation of the fifth metatarsal head was graded according to the medial tubercle location. We also evaluated angular change of the fifth metatarsal on weightbearing lateral radiographs. Percutaneous bunionette correction without fixation could achieve satisfactory clinical and radiographic results, with less complication, when compared with previously published outcomes of open and percutaneous surgery with fixation. In this surgical method, bunionette is corrected in 3 dimensions. To our knowledge, this is the first study to evaluate rotation of the metatarsal head and change in the sagittal angle of the fifth metatarsal after bunionette correction.