Nitrogen-Doped 3D-Graphene Advances Near-Infrared Photodetector for Logic Circuits and Image Sensors Overcoming 2D Limitations.

The limitations of two-dimensional (2D) graphene in broadband photodetector are overcome by integrating nitrogen (N) doping into three-dimensional (3D) structures within silicon (Si) via plasma-assisted chemical vapor deposition (PACVD) technology. This contributes to the construction of vertical Schottky heterojunction broad-spectrum photodetectors and applications in logic devices and image sensors. The natural nanoscale resonant cavity structure of 3D-graphene enhances photon capture efficiency, thereby increasing photocarrier generation. N-doping can fine-tune the electronic structure, advancing the Schottky barrier height and reducing dark current. The as-fabricated photodetector exhibits exceptional self-driven photoresponse, especially at 1550 nm, with an excellent photoresponsivity (79.6 A/W), specific detectivity (1013 Jones), and rapid response of 130 µs. Moreover, it enables logic circuits, high-resolution pattern image recognition, and broadband spectra recording across the visible to near-infrared range (400-1550 nm). This research will provide new views and technical support for the development and widespread application of high-performance semiconductor-based graphene broadband detectors.

Pneumatic Structural Deformation to Enhance Resonance Behavior for Broadband and Adaptive Radar Stealth.

Ideal radar absorbing materials (RAMs) require instantaneous, programmable, and spontaneous adaptability to cope with a complex electromagnetic (EM) environment across the full working frequency. Despite various material systems and adaptive mechanisms having been demonstrated, it remains a formidable challenge to integrate these benefits simultaneously. Here, we present a pneumatic matrix that couples morphable MXene/elastomer conductors with dielectric spacers, which leverages controllable airflow to reconfigure the spatial structure between a flat sheet and a hemispherical crown while maintaining resistance stability via wrinkle folding and unfolding. The interdimensional reconfigurations drastically induce multiple resonance behavior, enabling the matrix remarkable frequency tunability (144.5%), ultrawide bandwidth (15 GHz), weak angular dependence (45° incidence), ultrafast responsiveness (∼30 ms), and excellent reproducibility (1000 cycles). With multichannel fluidic and conceptual automated control systems, the final pneumatic device demonstrates a multiplexed, programmable, and autonomous transformable mode that builds a promising platform for smart radar cloaking.

Broadband, High-Reflectivity Dielectric Mirrors at Wafer Scale: Combining Photonic Crystal and Metasurface Architectures for Advanced Lightsails.

Highly ambitious initiatives aspire to propel a miniature spacecraft to a neighboring star within a human generation, leveraging the radiation pressure of lasers for propulsion. One major challenge for this enormous feat is to build a meter-scale, ultralow mass lightsail with broadband reflectivity. In this work, we present the design and fabrication of a lightsail composed of two distinct dielectric layers with photonic crystal/metasurface structure covering a 4" wafer. We achieved broadband reflection of >70% spanning over the full Doppler-shifted laser wavelength range during spacecraft acceleration with a low total mass in the range of a few grams when scaled up to meter size. Furthermore, we find new paths to reliably fabricate these subwavelength structures over macroscopic areas and then systematically characterize their optical performance, confirming their suitability for future lightsail applications. Our innovative device and precise nanofabrication approaches represent a significant leap toward interstellar exploration.

Achromatic and Coma-Corrected Hybrid Meta-Optics for High-Performance Thermal Imaging.

Long-wave infrared (LWIR) imaging, or thermal imaging, is widely applied in night vision and security monitoring. However, the widespread use of LWIR imagers is impeded by their bulky size, considerable weight, and high cost. While flat meta-optics present a potential solution to these limitations, existing pure LWIR meta-optics face constraints such as severe chromatic or coma aberrations. Here, we introduce an approach utilizing large-scale hybrid meta-optics to address these challenges and demonstrate the achromatic, coma-corrected, and polarization-insensitive thermal imaging. The hybrid metalens doublet is composed of a metasurface corrector and a refractive lens, featuring a full field-of-view angle surpassing 20° within the 8-12 µm wavelength range. Employing this hybrid metalens doublet, we showcase high-performance thermal imaging capabilities both indoors and outdoors, effectively capturing ambient thermal radiation. The proposed hybrid metalens doublet holds considerable promise for advancing miniaturized, lightweight, and cost-effective LWIR optical imaging systems.

Electrical Stimulation of Temporal and Limbic Circuitry Produces Distinct Responses in Human Ventral Temporal Cortex.

The human ventral temporal cortex (VTC) is highly connected to integrate visual perceptual inputs with feedback from cognitive and emotional networks. In this study, we used electrical brain stimulation to understand how different inputs from multiple brain regions drive unique electrophysiological responses in the VTC. We recorded intracranial EEG data in 5 patients (3 female) implanted with intracranial electrodes for epilepsy surgery evaluation. Pairs of electrodes were stimulated with single-pulse electrical stimulation, and corticocortical evoked potential responses were measured at electrodes in the collateral sulcus and lateral occipitotemporal sulcus of the VTC. Using a novel unsupervised machine learning method, we uncovered 2-4 distinct response shapes, termed basis profile curves (BPCs), at each measurement electrode in the 11-500 ms after stimulation interval. Corticocortical evoked potentials of unique shape and high amplitude were elicited following stimulation of several regions and classified into a set of four consensus BPCs across subjects. One of the consensus BPCs was primarily elicited by stimulation of the hippocampus; another by stimulation of the amygdala; a third by stimulation of lateral cortical sites, such as the middle temporal gyrus; and the final one by stimulation of multiple distributed sites. Stimulation also produced sustained high-frequency power decreases and low-frequency power increases that spanned multiple BPC categories. Characterizing distinct shapes in stimulation responses provides a novel description of connectivity to the VTC and reveals significant differences in input from cortical and limbic structures.SIGNIFICANCE STATEMENT Disentangling the numerous input influences on highly connected areas in the brain is a critical step toward understanding how brain networks work together to coordinate human behavior. Single-pulse electrical stimulation is an effective tool to accomplish this goal because the shapes and amplitudes of signals recorded from electrodes are informative of the synaptic physiology of the stimulation-driven inputs. We focused on targets in the ventral temporal cortex, an area strongly implicated in visual object perception. By using a data-driven clustering algorithm, we identified anatomic regions with distinct input connectivity profiles to the ventral temporal cortex. Examining high-frequency power changes revealed possible modulation of excitability at the recording site induced by electrical stimulation of connected regions.

The brain dynamics of visuospatial perspective-taking captured by intracranial EEG.

Visuospatial perspective-taking (VPT) is the ability to imagine a scene from a position different from the one used in self-perspective judgments (SPJ). We typically use VPT to understand how others see the environment. VPT requires overcoming the self-perspective, and impairments in this process are implicated in various brain disorders, such as schizophrenia and autism. However, the underlying brain areas of VPT are not well distinguished from SPJ-related ones and from domain-general responses to both perspectives. In addition, hierarchical processing theory suggests that domain-specific processes emerge over time from domain-general ones. It mainly focuses on the sensory system, but outside of it, support for this hypothesis is lacking. Therefore, we aimed to spatiotemporally distinguish brain responses domain-specific to VPT from the specific ones to self-perspective, and domain-general responses to both perspectives. In particular, we intended to test whether VPT- and SPJ specific responses begin later than the general ones. We recorded intracranial EEG data from 30 patients with epilepsy who performed a task requiring laterality judgments during VPT and SPJ, and analyzed the spatiotemporal features of responses in the broad gamma band (50-150 Hz). We found VPT-specific processing in a more extensive brain network than SPJ-specific processing. Their dynamics were similar, but both differed from the general responses, which began earlier and lasted longer. Our results anatomically distinguish VPT-specific from SPJ-specific processing. Furthermore, we temporally differentiate between domain-specific and domain-general processes both inside and outside the sensory system, which serves as a novel example of hierarchical processing.

Flexible multi-step hypothesis testing of human ECoG data using cluster-based permutation tests with GLMEs.

BACKGROUND: Time series analysis is critical for understanding brain signals and their relationship to behavior and cognition. Cluster-based permutation tests (CBPT) are commonly used to analyze a variety of electrophysiological signals including EEG, MEG, ECoG, and sEEG data without a priori assumptions about specific temporal effects. However, two major limitations of CBPT include the inability to directly analyze experiments with multiple fixed effects and the inability to account for random effects (e.g. variability across subjects). Here, we propose a flexible multi-step hypothesis testing strategy using CBPT with Linear Mixed Effects Models (LMEs) and Generalized Linear Mixed Effects Models (GLMEs) that can be applied to a wide range of experimental designs and data types. METHODS: We first evaluate the statistical robustness of LMEs and GLMEs using simulated data distributions. Second, we apply a multi-step hypothesis testing strategy to analyze ERPs and broadband power signals extracted from human ECoG recordings collected during a simple image viewing experiment with image category and novelty as fixed effects. Third, we assess the statistical power differences between analyzing signals with CBPT using LMEs compared to CBPT using separate t-tests run on each fixed effect through simulations that emulate broadband power signals. Finally, we apply CBPT using GLMEs to high-gamma burst data to demonstrate the extension of the proposed method to the analysis of nonlinear data. RESULTS: First, we found that LMEs and GLMEs are robust statistical models. In simple simulations LMEs produced highly congruent results with other appropriately applied linear statistical models, but LMEs outperformed many linear statistical models in the analysis of "suboptimal" data and maintained power better than analyzing individual fixed effects with separate t-tests. GLMEs also performed similarly to other nonlinear statistical models. Second, in real world human ECoG data, LMEs performed at least as well as separate t-tests when applied to predefined time windows or when used in conjunction with CBPT. Additionally, fixed effects time courses extracted with CBPT using LMEs from group-level models of pseudo-populations replicated latency effects found in individual category-selective channels. Third, analysis of simulated broadband power signals demonstrated that CBPT using LMEs was superior to CBPT using separate t-tests in identifying time windows with significant fixed effects especially for small effect sizes. Lastly, the analysis of high-gamma burst data using CBPT with GLMEs produced results consistent with CBPT using LMEs applied to broadband power data. CONCLUSIONS: We propose a general approach for statistical analysis of electrophysiological data using CBPT in conjunction with LMEs and GLMEs. We demonstrate that this method is robust for experiments with multiple fixed effects and applicable to the analysis of linear and nonlinear data. Our methodology maximizes the statistical power available in a dataset across multiple experimental variables while accounting for hierarchical random effects and controlling FWER across fixed effects. This approach substantially improves power leading to better reproducibility. Additionally, CBPT using LMEs and GLMEs can be used to analyze individual channels or pseudo-population data for the comparison of functional or anatomical groups of data.

Highly Responsive Switchable Broadband DUV-NIR Photodetector and Tunable Emitter Enabled by Uniform and Vertically Grown III-V Nanowire on Silicon Substrate for Integrated Photonics.

Low-dimensional semiconductor nanostructures, particularly in the form of nanowire configurations with large surface-to-volume-ratio, offer intriguing optoelectronic properties for the advancement of integrated photonic technologies. Here, a bias-controlled, superior dual-functional broadband light detecting/emitting diode enabled by constructing the aluminum-gallium-nitride-based nanowire on the silicon-platform is reported. Strikingly, the diode exhibits a stable and high responsivity (R) of over 200 mAW-1 covering an extremely wide operation band under reverse bias conditions, ranging from deep ultraviolet (DUV: 254 nm) to near-infrared (NIR: 1000 nm) spectrum region. While at zero bias, it still possesses superior DUV light selectivity with a high off-rejection ratio of 106. When it comes to the operation of the light-emitting mode under forward bias, it can achieve large spectral changes from UV to red simply by coating colloid quantum dots on the nanowires. Based on the multifunctional features of the diodes, this study further employs them in various optoelectronic systems, demonstrating outstanding applications in multicolor imaging, filterless color discrimination, and DUV/NIR visualization. Such highly responsive broadband photodetector with a tunable emitter enabled by III-V nanowire on silicon provides a new avenue toward the realization of integrated photonics and holds great promise for future applications in communication, sensing, imaging, and visualization.

Broadband Room-Temperature Photodetection via InBiTe3 Nanosheet.

Broadband room-temperature photodetection has become a pressing need as application requirements for communication, imaging, spectroscopy, and sensing have evolved. Topological insulators (TIs) have narrow bandgap structures with a wide absorption spectral response range, which should meet the requirements of broadband detection. However, owing to their high carrier concentration and low carrier mobility resulting in poor noise equivalent power (NEP), they are generally considered unsuitable for photodetection. Here, InBiTe3 alloy nanosheet formed by doping In2Te3 into Bi2Te3(≈ 1:1) is utilized, effectively improving carrier mobility by over ten times while maintaining a narrow bandgap structure, to fabricate a broadband photodetector covering a wide response range from visible to millimeter wave (MMW). Under the synergistic multi-mechanism of the photoelectric effect in the visible-infrared region and the electromagnetic-induced potential well (EIW) effect in Terahertz band, the performance of NEP = 75 pW Hz-1/2 and response time τ ≈100 µs in visible to infrared band and the performance of NEP = 6.7 × 10-3 pW Hz-1/2, τ ≈8 µs in Terahertz region are achieved. The results demonstrate the promising prospects of topological insulator alloy (like InBiTe3) nanosheet in optoelectronic detection applications and provide a direction for the research into high-performance broadband photoelectric detectors via TIs.

Anisotropic Te/PdSe2 Van Der Waals Heterojunction for Self-Powered Broadband and Polarization-Sensitive Photodetection.

Polarization-sensitive broadband optoelectronic detection is crucial for future sensing, imaging, and communication technologies. Narrow bandgap 2D materials, such as Te and PdSe2, show promise for these applications, yet their polarization performance is limited by inherent structural anisotropies. In this work, a self-powered, broadband photodetector utilizing a Te/PdSe2 van der Waals (vdWs) heterojunction, with orientations meticulously tailored is introduced through polarized Raman optical spectra and tensor calculations to enhance linear polarization sensitivity. The device exhibits anisotropy ratios of 1.48 at 405 nm, 3.56 at 1550 nm, and 1.62 at 4 µm, surpassing previously-reported photodetectors based on pristine Te and PdSe2. Additionally, it exhibits high responsivity (617 mA W-1 at 1550 nm), specific detectivity (5.27 × 1010 Jones), fast response (≈4.5 µs), and an extended spectral range beyond 4 µm. The findings highlight the significance of orientation-engineered heterostructures in enhancing polarization-sensitive photodetectors and advancing optoelectronic technology.

Broadband Van-der-Waals Photodetector Driven by Ferroelectric Polarization.

The potential for various future industrial applications has made broadband photodetectors beyond visible light an area of great interest. Although most 2D van-der-Waals (vdW) semiconductors have a relatively large energy bandgap (>1.2 eV), which limits their use in short-wave infrared detection, they have recently been considered as a replacement for ternary alloys in high-performance photodetectors due to their strong light-matter interaction. In this study, a ferroelectric gating ReS2 /WSe2 vdW heterojunction-channel photodetector is presented that successfully achieves broadband light detection (>1300 nm, expandable up to 2700 nm). The staggered type-II bandgap alignment creates an interlayer gap of 0.46 eV between the valence band maximum (VBMAX ) of WSe2 and the conduction band minimum (CBMIN ) of ReS2 . Especially, the control of poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) ferroelectric dipole polarity for a specific wavelength allows a high photoresponsivity of up to 6.9 × 103 A W-1 and a low dark current below 0.26 nA under the laser illumination with a wavelength of 405 nm in P-up mode. The achieved high photoresponsivity, low dark current, and full-range near infrared (NIR) detection capability open the door for next-generation photodetectors beyond traditional ternary alloy photodetectors.

Space-Confined Growth of Ultrathin P-Type GeTe Nanosheets for Broadband Photodetectors.

As p-type phase-change degenerate semiconductors, crystalline and amorphous germanium telluride (GeTe) exhibit metallic and semiconducting properties, respectively. However, the massive structural defects and strong interface scattering in amorphous GeTe films significantly reduce their performance. In this work, two-dimensional (2D) p-type GeTe nanosheets are synthesized via a specially designed space-confined chemical vapor deposition (CVD) method, with the thickness of the GeTe nanosheets reduced to 1.9 nm. The space-confined CVD method improves the crystallinity of ultrathin GeTe by lowering the partial pressure of the reactant gas, resulting in GeTe nanosheets with excellent p-type semiconductor properties, such as a satisfactory on/off ratio of 105. Temperature-dependent electrical measurements demonstrate that variable-range hopping and optical-phonon-assisted hopping mechanisms dominate transport behavior at low and high temperatures, respectively. GeTe devices exhibit significantly high responsivity (6589 and 2.2 A W-1 at 633 and 980 nm, respectively) and detectivity (1.67 × 1011 and 1.3 × 108 Jones at 633 and 980 nm, respectively), making them feasible for broadband photodetectors in the visible to near-infrared range. Furthermore, the fabricated GeTe/WS2 diode exhibits a rectification ratio of 103 at zero gate voltage. These satisfactory p-type semiconductor properties demonstrate that ultrathin GeTe exhibits enormous potential for applications in optoelectronic interconnection circuits.

Enhanced Broadband Manipulation of Acoustic Vortex Beams Using 3-bit Coding Metasurfaces through Topological Optimization.

The acoustic coding metasurfaces (ACMs) have the ability to manipulate complex acoustic behavior by reconstructing the coding sequence. In particular, the design of broadband coding enhances the versatility of ACMs. ACMs offer significant advantages over traditional metasurfaces, including a limited number of units and flexible wave control performance. The unit quantity is determined by 2n, with 1-bit utilizing 2 units, 2-bit using 4 units, and 3-bit employing 8 units. Utilizing multiple bits allows for precise control over the phase of sound waves and enables the realization of more intricate acoustic functions. To address the requirements of broadband multi-bit applications, this paper presents the development of novel 3-bit broadband reflected acoustic coding metasurfaces (BACMs) with eight coding units. These metasurfaces are systematically designed using the bottom-up topology optimization method. A constant phase difference of 45° can be achieved across all eight coding units within a broad frequency range. Additionally, the spiral distribution of phase differences enables the construction of an acoustic vortex metasurface. Moreover, by combining the convolution method, the strategies are outlined for constructing vortex-focusing metasurfaces and vortex beam manipulation metasurfaces. These 3-bit coding metasurfaces possess significant potential in the fields of acoustic particle suspension and acoustic communication.

Solution-Processable Large-Area Black Phosphorus/Reduced Graphene Oxide Schottky Junction for High-Temperature Broadband Photodetectors.

2D materials-based broadband photodetectors have extensive applications in security monitoring and remote sensing fields, especially in supersonic aircraft that require reliable performance under extreme high-temperature conditions. However, the integration of large-area heterostructures with 2D materials often involves high-temperature deposition methods, and also limited options and size of substrates. Herein, a liquid-phase spin-coating method is presented based on the interface engineering to prepare larger-area Van der Waals heterojunctions of black phosphorus (BP)/reduced graphene oxide (RGO) films at room temperature on arbitrary substrates of any required size. Importantly, this method avoids the common requirement of high-temperature, and prevents the curling or stacking in 2D materials during the liquid-phase film formation. The BP/RGO films-based devices exhibit a wide spectral photo-response, ranging from the visible of 532 nm to infrared range of 2200 nm. Additionally, due to Van der Waals interface of Schottky junction, the array devices provide infrared detection at temperatures up to 400 K, with an outstanding photoresponsivity (R) of 12 A W-1 and a specific detectivity (D*) of ≈2.4 × 109 Jones. This work offers an efficient approach to fabricate large-area 2D Schottky junction films by solution-coating for high-temperature infrared photodetectors.

Efficient Carrier Transport in 2D Bi2O2Se/CsBi3I10 Perovskite Heterojunction Enables Highly-Sensitive Broadband Photodetection.

2D Bi2O2Se has recently garnered significant attention in the electronics and optoelectronics fields due to its remarkable photosensitivity, broad spectral absorption, and excellent long-term environmental stability. However, the development of integrated Bi2O2Se photodetector with high performance and low-power consumption is limited by material synthesis method and the inherent high carrier concentration of Bi2O2Se. Here, a type-I heterojunction is presented, comprising 2D Bi2O2Se and lead-free bismuth perovskite CsBi3I10, for fast response and broadband detection. Through effective charge transfer and strong coupling effect at the interfaces of Bi2O2Se and CsBi3I10, the response time is accelerated to 4.1 µs, and the detection range is expanded from ultraviolet to near-infrared spectral regions (365-1500 nm). The as-fabricated photodetector exhibits a responsivity of 48.63 AW-1 and a detectivity of 1.22×1012 Jones at 808 nm. Moreover, efficient modulation of the dominant photocurrent generation mechanism from photoconductive to photogating effect leads to sensitive response exceeding 103 AW-1 for heterojunction-based photo field effect transistor (photo-FETs). Utilizing the large-scale growth of both Bi2O2Se and CsBi3I10, the as-fabricated integrated photodetector array demonstrates outstanding homogeneity and stability of photo-response performance. The proposed 2D Bi2O2Se/CsBi3I10 perovskite heterojunction holds promising prospects for the future-generation photodetector arrays and integrated optoelectronic systems.

Low Temperature Synthesis of 2D p-Type α-In2Te3 with Fast and Broadband Photodetection.

2D A 2 III B 3 VI ${\mathrm{A}}_2^{{\mathrm{III}}}{\mathrm{B}}_3^{{\mathrm{VI}}}$ compounds (A = Al, Ga, In, and B = S, Se, and Te) with intrinsic structural defects offer significant opportunities for high-performance and functional devices. However, obtaining 2D atomic-thin nanoplates with non-layered structure on SiO2/Si substrate at low temperatures is rare, which hinders the study of their properties and applications at atomic-thin thickness limits. In this study, the synthesis of ultrathin, non-layered α-In2Te3 nanoplates is demonstrated using a BiOCl-assisted chemical vapor deposition method at a temperature below 350 °C on SiO2/Si substrate. Comprehensive characterization results confirm the high-quality single crystal is the low-temperature cubic phase α-In2Te3 , possessing a noncentrosymmetric defected ZnS structure with good second harmonic generation. Moreover, α-In2Te3 is revealed to be a p-type semiconductor with a direct and narrow bandgap value of 0.76 eV. The field effect transistor exhibits a high mobility of 18 cm2 V-1 s-1, and the photodetector demonstrates stable photoswitching behavior within a broadband photoresponse from 405 to 1064 nm, with a satisfactory response time of τrise = 1 ms. Notably, the α-In2Te3 nanoplates exhibit good stability against ambient environments. Together, these findings establish α-In2Te3 nanoplates as promising candidates for next-generation high-performance photonics and electronics.

Self-Powered and Broadband Photodetectors Based on High-performance Mixed Dimensional Sb2O3/PdTe2/Si Heterojunction for Multiplex Environmental Monitoring.

Solar-blind ultraviolet (SBUV) to near-infrared (NIR) broadband photodetectors (BB-PD) have important applications in environmental monitoring and other applications. However, it is challenging to prepare SBUV-IR photosensitive materials via simple steps and to construct SBUV-IR broadband devices for multiplex detection with high sensitivity at different wavelengths. Here, self-powered and broadband photodetectors using a high-performance mixed dimensional Sb2O3 nanorod 1-dimension (1D)/monodisperse microdiamond-like PdTe2 3-dimension (3D)/Si (3D) heterojunction for multiplex detection of environmental pollutants with high sensitivity at broadband wavelength are developed. The 1D/3D mixed dimensional Sb2O3/PdTe2/Si structure combines the advantages of strong light absorption, high carrier transport efficiency of 1D Sb2O3 nanorods, and expansion of interface barrier caused by 3D microdiamond-like PdTe2 interlayer to improve the photocurrent density and self-powered ability. The efficient photogenerated charge separation enables anon/off ratio of more than 5 × 106. The device exhibits excellent photoelectric properties from 255 to 980 nm with the responsivity from 4.56 × 10-2 to 6.55 × 10-1 AW-1, the detectivity from 2.36 × 1012 to 3.39 × 1013 Jones, and the sensitivity from 3.90 × 107 to 1.10 × 1010 cm2 W-1 without external bias. Finally, the proposed device is applied for the multiplex monitoring of environmental pollution gases NO2 with the detection limit of 200 ppb and PM2.5 particles at mild pollution at broadband wavelength. The proposed BB-PD has great potential for multiplex detection of environmental pollutants and other analytes at broadband wavelength.

Tailored and universal parallel transmit broadband pulses for homogeneous 3D excitation of the human heart at 7T.

PURPOSE: To research and evaluate the performance of broadband tailored kT-point pulses (TP) and universal pulses (UP) for homogeneous excitation of the human heart at 7T. METHODS: Relative 3D B 1 + $$ {\mathrm{B}}_1^{+} $$ -maps of the thorax were acquired from 29 healthy volunteers. TP and UP were designed using the small-tip-angle approximation for a different composition of up to seven resonance frequencies. TP were computed for each of the 29 B 1 + $$ {\mathrm{B}}_1^{+} $$ -maps, and UPs were calculated using 22 B 1 + $$ {\mathrm{B}}_1^{+} $$ -maps and tested in seven testcases. The performance of the pulses was analyzed using the coefficient of variation (CV) in the 3D heart volumes. The 3D gradient-echo (GRE) scans were acquired for the seven testcases to qualitatively validate the B 1 + $$ {\mathrm{B}}_1^{+} $$ -predictions. RESULTS: Single- and double-frequency optimized pulses achieved homogeneity in flip angle (FA) for the frequencies they were optimized for, while the broadband pulses achieved uniformity in FA across a 1300 Hz frequency range. CONCLUSION: Broadband TP and UP can be used for homogeneous excitation of the heart volume across a 1300 Hz frequency range, including the water and the main six fat peaks, or with longer pulse durations and higher FAs for a smaller transmit bandwidth. Moreover, despite large inter-volunteer variations, broadband UP can be used for calibration-free 3D heart FA homogenization in time-critical situations.

Implementation of pure shift 1 H NMR in metabolic phenotyping for structural information recovery of biofluid metabolites with complex spin systems.

NMR spectroscopy is a mainstay of metabolic profiling approaches to investigation of physiological and pathological processes. The one-dimensional proton pulse sequences typically used in phenotyping large numbers of samples generate spectra that are rich in information but where metabolite identification is often compromised by peak overlap. Recently developed pure shift (PS) NMR spectroscopy, where all J-coupling multiplicities are removed from the spectra, has the potential to simplify the complex proton NMR spectra that arise from biosamples and hence to aid metabolite identification. Here we have evaluated two complementary approaches to spectral simplification: the HOBS (band-selective with real-time acquisition) and the PSYCHE (broadband with pseudo-2D interferogram acquisition) pulse sequences. We compare their relative sensitivities and robustness for deconvolving both urine and serum matrices. Both methods improve resolution of resonances ranging from doublets, triplets and quartets to more complex signals such as doublets of doublets and multiplets in highly overcrowded spectral regions. HOBS is the more sensitive method and takes less time to acquire in comparison with PSYCHE, but can introduce unavoidable artefacts from metabolites with strong couplings, whereas PSYCHE is more adaptable to these types of spin system, although at the expense of sensitivity. Both methods are robust and easy to implement. We also demonstrate that strong coupling artefacts contain latent connectivity information that can be used to enhance metabolite identification. Metabolite identification is a bottleneck in metabolic profiling studies. In the case of NMR, PS experiments can be included in metabolite identification workflows, providing additional capability for biomarker discovery.

CPA-induced Hz to THz broadband absorber with switchable perfect absorption between radio-microwave and THz frequency spectrum.

The coherent perfect absorption (CPA) occurring in the graphene sheet suspended in air can be utilized to develop an ultrathin, ultra-broadband absorber working in the frequency range from a few hertz (Hz) to terahertz (THz) with perfect absorption. A graphene sheet is studied to induce the CPA to cover radio, microwave and lower THz frequency ranges. A graphene resonator able to provide the surface plasmon resonance (SPR) is combined with the graphene sheet to provide CPA at either side of a thin dielectric layer forms metamaterial structure with the cavity and enhances the absorption bandwidth in the THz region by creating a resonance near quasi-CPA frequency. A dielectric silicon resonator is embedded in the structure, which creates dipolar resonances between the resonances obtained by the formed cavity between the graphene sheet and resonator. This enhances the absorption level in the THz region. The absorption bandwidth is further enhanced to 7 THz by including a graphene disc at the top of the silicon resonator. Thus, the multiple multi-order resonances occurring in the silicon dielectric and SPR of graphene resonators are merged with the phenomena of CPA occurring in the graphene sheets to extend the CPA bandwidth in the THz regime. The doping level of graphene or its tunable Fermi energy based on the applied DC electric field provides the tunability in the total obtained absorption bandwidth. The symmetric structure provides polarization-insensitive behavior with an allowed incident angle of more than 45° with more than 90% absorption.