Thermally stable high-loading single Cu sites on ZSM-5 for selective catalytic oxidation of NH3.

Rigorous comparisons between single site- and nanoparticle (NP)-dispersed catalysts featuring the same composition, in terms of activity, selectivity, and reaction mechanism, are limited. This limitation is partly due to the tendency of single metal atoms to sinter into aggregated NPs at high loadings and elevated temperatures, driven by a decrease in metal surface free energy. Here, we have developed a unique two-step method for the synthesis of single Cu sites on ZSM-5 (termed CuS/ZSM-5) with high thermal stability. The atomic-level dispersion of single Cu sites was confirmed through scanning transmission electron microscopy, X-ray absorption fine structure (XAFS), and electron paramagnetic resonance spectroscopy. The CuS/ZSM-5 catalyst was compared to a CuO NP-based catalyst (termed CuN/ZSM-5) in the oxidation of NH3 to N2, with the former exhibiting superior activity and selectivity. Furthermore, operando XAFS and diffuse reflectance infrared Fourier transform spectroscopy studies were conducted to simultaneously assess the fate of the Cu and the surface adsorbates, providing a comprehensive understanding of the mechanism of the two catalysts. The study shows that the facile redox behavior exhibited by single Cu sites correlates with the enhanced activity observed for the CuS/ZSM-5 catalyst.

Unveiling singlet oxygen spin trapping in catalytic oxidation processes using in situ kinetic EPR analysis.

Singlet oxygen (1O2) plays a pivotal role in numerous catalytic oxidation processes utilized in water purification and chemical synthesis. The spin-trapping method based on electron paramagnetic resonance (EPR) analysis is commonly employed for 1O2 detection. However, it is often limited to time-independent acquisition. Recent studies have raised questions about the reliability of the 1O2 trapper, 2,2,6,6-tetramethylpiperidine (TEMP), in various systems. In this study, we introduce a comprehensive, kinetic examination to monitor the spin-trapping process in EPR analysis. The EPR intensity of the trapping product was used as a quantitative measurement to evaluate the concentration of 1O2 in aqueous systems. This in situ kinetic study was successfully applied to a classical photocatalytic system with exceptional accuracy. Furthermore, we demonstrated the feasibility of our approach in more intricate 1O2-driven catalytic oxidation processes for water decontamination and elucidated the molecular mechanism of direct TEMP oxidation. This method can avoid the false-positive results associated with the conventional 2D 1O2 detection techniques, and provide insights into the reaction mechanisms in 1O2-dominated catalytic oxidation processes. This work underscores the necessity of kinetic studies for spin-trapping EPR analysis, presenting an avenue for a comprehensive exploration of the mechanisms governing catalytic oxidation processes.

Regulating Catalytic Oxidation Enantiomers Behavior by Imparting Chiral Microenvironment in Zr-Based Metal-Organic Frameworks.

Chiral inversions of enantiomers have significantly different biological activities, so it is important to develop simple and effective methods to efficiently identify optically pure compounds. Inspired by enzyme catalysis, the construction of chiral microenvironments resembling enzyme pockets in the pore space structure of metal-organic frameworks (MOFs) to achieve asymmetric enantioselective recognition and catalysis has become a new research hotspot. Here, a super-stable porphyrin-containing material PCN-224 is constructed by solvothermal method and a chiral microenvironment around the existing catalytic site of the material is created by post-synthesis modifications of the histidine (His) enantiomers. Experimental and theoretical calculations results show that the modulation of chiral ligands around Zr oxide clusters produces different spatial site resistances, which can greatly affect the adsorption and catalytic level of the enantiomeric molecules of tryptophan guests, resulting in a good enantioselective property of the material. It provides new ideas and possibilities for future chiral recognition and asymmetric catalysis.

Thermally Stable High-Entropy Layered Double Hydroxides for Advanced Catalysis.

Layered double hydroxides (LDHs), especially high-entropy LDHs (HE-LDHs), have gained increasing attention. However, HE-LDHs often possess poor thermal stability, restricting their applications in thermo-catalysis. Herein, a novel complexing nucleation method is proposed for engineering HE-LDHs with enhanced thermal stability. This approach precisely controls the nucleation of metal ions with different solubility products, achieving homogeneous nucleation and effectively mitigating phase segregation and transformation at elevated temperatures. The prepared HE-LDH sample demonstrated exceptional thermal stability at temperatures up to 300 °C, outperforming all previously reported LDHs. Importantly, these HE-LDHs preserve both Lewis and Brønsted acidic sites, enabling the 100% removal of aromatic sulfides and alkaline nitrogen compounds from fuel oils in thermo-catalytic oxidation reactions. Experimental and characterization findings reveal that the metal-hydroxide bonds in the prepared HE-LDHs are strengthened by associated hydroxyl groups, inducing negative thermal expansion and augmenting the presence of acidic sites, thereby ensuring structural stability and enhancing catalytic activity. This study not only proposes a strategy for engineering HE-LDHs with remarkable thermal stability but also highlights potential applications of LDHs in thermo-catalysis.

Temperature-Dependent Supramolecular Isomeric Co-CPs for Luminescence Recognition and Catalytic Oxidation.

Two Co-based supramolecular isomers were synthesized from a fluorinated carboxylic acid ligand under hydrothermal conditions at varying temperatures. Both exhibited similar one-dimensional chain structures while different bending connections of the aromatic rings led to different supramolecular structures, namely CoCP-1 and CoCP-2, respectively. The structural differences of two isomers resulted in discrepant performance with regards to luminescence sensing and catalysis. CoCP-1 demonstrated more significant luminescence quenching activity toward biomarkers 2,6-dipyridinoic acid (DPA) and high vanilloid acid (HVA), which could be distinguished in the presence of Eu3+. The limit of detection (LOD) was found to be as low as 3.4 and 1.3 µM, respectively. The recovery rate of for HVA and DPA was within the range of 89.6-101.2% and 99.7-117.9% in simulated urine and serum, respectively, indicating potential reliability in monitoring these two analytes in real samples. Notably, CoCP-2 exhibited catalytic activity for the oxidation of thioethers to sulfoxides. Our finding here suggests that the coordination conformation of the ligands within supramolecular isomers plays a pivotal role in determining the structure and luminescence sensing/catalysis performance.

Insights into the Synergistic Catalytic Effect of TiO2 Supported V-W Oxides for Selective C-H Bond Oxidation of Cyclohexane to KA Oil.

It is urgent to develop an efficient and stable non-noble metal catalyst for selective C-H bond oxidation of cyclohexane. Herein, a series of V-W oxides supported on TiO2 catalysts (V-W/TiO2) were fabricated. The V-W/TiO2 catalysts exhibited much higher catalytic activity for the selective oxidation of cyclohexane to KA oil, compared to that of V/TiO2 and W/TiO2 catalysts. The good distribution of active metals and the synergistic effect were responsible for the enhanced catalytic activity. H2-TPR results disclosed that the presence of V in V-W/TiO2 affected the reducibility of W6+ species, and XPS verified that an electronic interaction was formed between them. Such results led to good catalytic reusability of V-W/TiO2 catalyst during the reactions, and no obvious activity loss was found after six runs. The reaction mechanism was investigated, and the results verified that hydroxyl radicals generated from H2O2 homolysis were the main active oxidative species. Theoretical study revealed that V dopant could regulate electronic structure of adjacent O atom, facilitating the adsorption of cyclohexane, and lower energy was needed for the rate-limiting step over V-W/TiO2 during the whole oxidation reaction. This work developed an efficient V-W/TiO2 catalyst for the selective oxidation of cyclohexane via a synergistic effect.

TS-1@MCM-48 Core-Shell Catalysts for Efficient Oxidation of p-Diethylbenzene to High Value-Added Derivatives.

To expand the market capacity of p-diethylbenzene (PDEB), core-shell zeolite (TS-1@MCM-48) is designed as a catalyst for PDEB oxidation. TS-1@MCM-48 catalyst is synthesized by in-situ crystallization method and characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), N2 adsorption-desorption, in-situ electron paramagnetic resonance (EPR) and 29Si nuclear magnetic resonance (29Si MAS-NMR). Oxidation of PDEB by H2O2 was investigated systematically in liquid phase. The conversion of PDEB over TS-1@MCM-48 was 28.1 % and the total selectivity was 72.6 %, where the selectivity of EAP (p-ethylacetophenone) and EPEA (4-ethyl-α-methylbenzyl alcohol) was 28.6 % and 44.0 %, respectively. Compared with TS-1 and MCM-48 zeolite, the conversion rate of reactants and the selectivity of products have been significantly improved. The catalytic performance of TS-1@MCM-48 is derived from its well-crystallized microporous core and mesoporous shell with regular channels, which make active sites of TS-1 zeolite in the catalyst be fully utilized and mass transfer resistance be largely reduced. Further through theoretical calculation, we propose that the oxidation of PDEB is the result of the combination and mutual transformation of free radical process and carbocation process. Core-shell structure ensures the conversion rate of raw materials and improves the selectivity of products.

In-Depth Understanding of the Oxidative Compatibility of Volatile Organic Compounds with Mn2O3 and Pt-Loaded Catalysts.

Designing suitable catalysts for efficiently degrading volatile organic compounds (VOCs) is a great challenge due to the distinct variety and nature of VOCs. Herein, the suitability of different typical VOCs (toluene and acetone) over Pt-based catalysts and Mn2O3 was investigated carefully. The activity of Mn2O3 was inferior to Pt-loaded catalysts in toluene oxidation but showed superior ability for destroying acetone, while Pt loading could boost the catalytic activity of Mn2O3 for both acetone and toluene. This suitability could be determined by the physicochemical properties of the catalysts and the structure of the VOC since toluene destruction activity is highly reliant on Pt0 in the metallic state and linearly correlated with the amount of surface reactive oxygen species (Oads), while the crucial factor that affects acetone oxidation is the mobility of lattice oxygen (Olat). The Pt/Mn2O3 catalyst shows highly active Pt-O-Mn interfacial sites, favoring the generation of Oads and promoting Mn-Olat mobility, leading to its excellent performance. Therefore, the design of abundant active sites is an effective means of developing highly adaptive catalysts for the oxidation of different VOCs.

Defect-Rich Regulatory Activity Strategy: Disordered Structure for Enhanced Catalytic Interfacial Reaction of Chlorobenzene.

In contrast to previous defect engineering methods, the preparation of amorphous materials can obtain abundant defect sites through a simple way, which is expected to effectively degrade Volatile Organic Compounds (VOCs) under milder conditions. However, in-depth and systematic studies in this area are still lacking. Novel types of amorphous CeMnx catalysts with abundant defects were prepared through simple hydrothermal synthesis and used for Cl-VOCs catalysis for the first time. Experimental characterizations and DFT calculations proved that Ce doping induced MnO2 lattice distortion, which led to the transformation of CeMnx into an amorphous structure and the formation of abundant defect sites. It was observed that CeMn0.16 was able to eliminate chlorobenzene (CB) at 200 °C, and the CO2 yields and the selectivity of inorganic chlorine was significantly higher than that of MnO2. The 18O isotope kinetic experiments revealed that the interfacial reaction process followed the MVK mechanism. The large number of oxygen vacancies accelerated the migration of lattice oxygen from the interior to the exterior, enhancing the ability to trap gas-phase oxygen. Mn4+ acted as the main active center to participate in CB catalysis, and the resulting reactive oxygen species (ROS) and Mn3+-[O2-]-Ce4+ further accelerated the entire oxidation cycle.

Boosting Catalytic and Anti-fluorination Performance of the Ru/Vanadia-Titania Catalyst for the Oxidative Destruction of Freon by Sulfuric Acid Modification.

Chlorofluorocarbons (CFCs) exert a strong greenhouse effect and constitute the largest contributor to ozone depletion. Catalytic removal is considered an effective pathway for eliminating low-concentration CFCs under mild conditions. The key issue is the easy deactivation of the catalysts due to their surface fluorination. We herein report a comparative investigation on catalytic dichlorodifluoromethane (CFC-12) removal in the absence or presence of water over the sulfuric-acid-modified three-dimensionally ordered macroporous vanadia-titania-supported Ru (S-Ru/3DOM VTO) catalysts. The S-Ru/3DOM VTO catalyst exhibited high activity (T90% = 278 °C at space velocity = 40 000 mL g-1 h-1) and good stability within 60 h of on-stream reaction in the presence of 1800 ppm of water due to the improvements in acid site amount and redox ability that promoted the adsorption of CFC-12 and the activation of C-F bonds. Compared with the case under dry conditions, catalytic performance for CFC-12 removal was better over the S-Ru/3DOM VTO catalyst in the presence of water. Water introduction mitigated surface fluorination by the replenishment of hydroxyl groups, inhibited the formation of halogenated byproducts via the surface fluorine species cleaning effect, and promoted the reaction pathway of COX2 (X = Cl/F) → carboxylic acid → CO2.

Constructing Pd@Layered-CoOx/MFI Bifunctional Catalyst for Efficient Ethyl Acetate Oxidation: Boosted C═O Activation and *O Species Transformation.

Oxygenated volatile organic compounds (OVOCs), emitted in large quantities by the chemical industry, are a major contributor to the formation of ozone and subsequent particulate matter. For the efficient catalytic oxidation of OVOCs, the challenges of molecular activation and intermediate inhibition remain. The construction of bifunctional active sites with specific structures offers a promising way to overcome these problems. Here, the Pd@Layered-CoOx/MFI bifunctional catalyst with core-shell active sites was rationally fabricated though a two-step ligand pyrolysis method, which exhibits a superb oxidation efficiency toward ethyl acetate (EA). Over this, 13.4% of EA (1000 ppm) can be oxidized at just 140 °C with a reaction rate of 13.85 mmol·gPd-1·s-1, around 176.7 times higher than that of the conventional Pd-CoOx/MFI catalyst. The electronic coupling of the Pd-Co pair promotes the electron back-donation from Pd nanoparticles to the layered CoOx shell and facilitates the formation of Pd2+ species, which greatly enhances the adsorption and activation of the electron-rich C═O bond of the EA molecules. In addition, the synergy of these core-shell Pd@Layered-CoOx sites accelerates the activation and transformation of *O species, which inhibit the formation of acetaldehyde and ethanol byproducts, ensuring the rapid total oxidation of EA molecules via the Mars-van Krevelen mechanism. This work established a solid foundation for exploring robust bifunctional catalysts for deep OVOC purification.

Photothermal Catalytic Removal of 1,2-DCE with High HCl Selectivity over the Brønsted Acid-Enriched Sulfur-Doped MOFs.

Chlorinated volatile organic compounds come from a wide range of sources and are highly toxic, posing a serious threat to biological health and the environment. Herein, a high-efficiency and energy-saving photothermal synergistic catalytic oxidation method was developed for the removal of 1,2-dichloroethane (1,2-DCE). Compared to traditional thermocatalysis, the 1,2-DCE conversion over Ru-U6S in photothermal synergistic catalysis at 340 °C increased by approximately 44% not only reducing energy consumption but also avoiding the instability of MOF structure caused by high reaction temperature. The excellent photothermal catalytic oxidation activity was derived from the synergistic effect of photo- and thermocatalysis. Ru-U6S demonstrated excellent 1,2-DCE adsorption capacity and stronger light utilization and could produce more reactive oxygen species (•OH and •O2-) after light illumination, which participated in the oxidation reaction, promoting the release of the active site of the catalyst. The results of H2O-TPD and NH3-DRIFTS exhibited that the use of S-containing ligands in the synthesis process increased the hydroxyl groups and Brønsted acid sites, significantly improved the selectivity of CO2 and HCl in the oxidation process, and reduced the release of chlorine-containing byproducts. This work provides a high-efficiency and energy-saving strategy for removing chlorinated volatile organic compounds and increasing the selectivity of ideal products directly with MOFs directly.

Monolithic Catalyst of Ni Foam-Supported MnOx for Boosting Magnetocaloric Oxidation of Toluene.

Catalytic oxidation has been considered an effective technique for volatile organic compound degradation. Development of metal foam-based monolithic catalysts coupling electromagnetic induction heating (EMIH) with efficiency and low energy is critical yet challenging in industrial applications. Herein, a Mn18.2-NF monolithic catalyst prepared by electrodeposition exhibited superior toluene catalytic activity under EMIH conditions, and the temperature of 90% toluene conversion decreased by 89 °C compared to that in resistance furnace heating. Relevant characterizations proved that the skin effect induced by EMIH encouraged activation of gaseous oxygen, leading to superior low-temperature redox properties of Mn18.2-NF under the EMIH condition. In situ Fourier transform infrared spectroscopy results showed that skin effect-induced activation of oxidizing species further accelerated the conversion of intermediates. As a result, the Mn18.2-NF monolithic catalyst under EMIH demonstrated remarkable performance for the toluene oxidation, surpassing the conventional nonprecious metal catalyst and other reported monolithic catalysts.

Enhancement of Mineralization Ability and Water Resistance of Vanadium-Based Catalysts for Catalytic Oxidation of Chlorobenzene by Platinum Loading.

The design of a catalyst with multifunctional sites is one of the effective methods for low-temperature catalytic oxidation of chlorinated volatile organic compounds (CVOCs). The loss of redox sites and competitive adsorption of H2O prevalent in the treatment of industrial exhaust gases are the main reasons for the weak mineralization ability and poor water vapor resistance of V-based catalysts. In this work, platinum (Pt) is selected to combine with the V/CeO2 catalyst, which provides more redox sites and H2O dissociative activation sites and further enhances its catalytic performance. The results show that PtV/CeO2 achieves 90% of the CO2 yield at 318 °C and maintains excellent catalytic activity rather than continuous deactivation within 15 h after water vapor injection. The formation of Pt-O-V bonds enhances the redox ability and promotes deep oxidation of polychlorinated intermediates, accounting for the significantly improved mineralization ability of PtV/CeO2. The dissociative activation effect of Pt on H2O molecules strengthens the migration and activation of V-adsorbed H2O, precluding V-poisoning and notably improving water resistance. This study lays a solid foundation for the efficient degradation of chlorobenzene under humid conditions.

Potential Strategy to Control the Organic Components of Condensable Particulate Matter: A Critical Review.

More and more attention has been paid to condensable particulate matter (CPM) since its emissions have surpassed that of filterable particulate matter (FPM) with the large-scale application of ultralow-emission reform. CPM is a gaseous material in the flue stack but instantly turns into particles after leaving the stack. It is composed of inorganic and organic components. Organic components are an important part of CPM, and they are an irritant, teratogenic, and carcinogenic, which triggers photochemical smog, urban haze, and acid deposition. CPM organic components can aggravate air pollution and climate change; therefore, consideration should be given to them. Based on existing methods for removing atmospheric organic pollutants and combined with the characteristics of CPM organic components, we provide a critical overview from the aspects of (i) fundamental cognition of CPM, (ii) common methods to control CPM organic components, and (iii) catalytic oxidation of CPM organic components. As one of the most encouraging methods, catalytic oxidation is discussed in detail, especially in combination with selective catalytic reduction (SCR) technology, to meet the growing demands for multipollutant control (MPC). We believe that this review is inspiring for a fuller understanding and deeper exploration of promising approaches to control CPM organic components.

Modulating the Electronic States of Pt Nanoparticles on Reducible Metal-Organic Frameworks for Boosting the Oxidation of Volatile Organic Compounds.

The adsorption and activation of pollutant molecules and oxygen play a critical role in the oxidation reaction of volatile organic compounds (VOCs). In this study, superior adsorption and activation ability was achieved by modulating the interaction between Pt nanoparticles (NPs) and UiO-66 (U6) through the spatial position effect. Pt@U6 exhibits excellent activity in toluene, acetone, propane, and aldehyde oxidation reactions. Spectroscopic studies, 16O2/18O2 kinetic isotopic experiments, and density functional theory (DFT) results jointly reveal that the encapsulated Pt NPs of Pt@U6 possess higher electron density and d-band center, which is conducive for the adsorption and dissociation of oxygen. The toluene oxidation reaction and DFT results indicate that Pt@U6 is more favorable to activate the C-H of toluene and the C═C of maleic anhydride, while Pt/U6 with lower electron density and d-band center exhibits a higher oxygen dissociation temperature and higher reactant activation energy barriers. This study provides a deep insight into the architecture-performance relation of Pt-based catalysts for the catalytic oxidation of VOCs.

Enhanced Catalytic Oxidation Reactivity over Atomically Dispersed Pt/CeO2 Catalysts by CO Activation.

The elevation of the low-temperature oxidation activity for Pt/CeO2 catalysts is challenging to meet the increasingly stringent requirements for effectively eliminating carbon monoxide (CO) from automobile exhaust. Although reducing activation is a facile strategy for boosting reactivity, past research has mainly concentrated on applying H2 as the reductant, ignoring the reduction capabilities of CO itself, a prevalent component of automobile exhaust. Herein, atomically dispersed Pt/CeO2 was fabricated and activated by CO, which could lower the 90% conversion temperature (T90) by 256 °C and achieve a 20-fold higher CO consumption rate at 200 °C. The activated Pt/CeO2 catalysts showed exceptional catalytic oxidation activity and robust hydrothermal stability under the simulated working conditions for gasoline or diesel exhausts. Characterization results illustrated that the CO activation triggered the formation of a large portion of Pt0 terrace sites, acting as inherent active sites for CO oxidation. Besides, CO activation weakened the Pt-O-Ce bond strength to generate a surface oxygen vacancy (Vo). It served as the oxygen reservoir to store the dissociated oxygen and convert it into active dioxygen intermediates. Conversely, H2 activation failed to stimulate Vo, but triggered a deactivating transformation of the Pt nanocluster into inactive PtxOy in the presence of oxygen. The present work offers coherent insight into the upsurging effect of CO activation on Pt/CeO2, aiming to set up a valuable avenue in elevating the efficiency of eliminating CO, C3H6, and NH3 from automobile exhaust.

Defect-Confinement Strategy for Constructing CuO Clusters on Carbon Nanotubes for Catalytic Oxidation of AsH3 at Room Temperature.

The efficient removal of the highly toxic arsine gas (AsH3) from industrial tail gases under mild conditions remains a formidable challenge. In this study, we utilized the confinement effect of defective carbon nanotubes to fabricate a CuO cluster catalyst (CuO/ACNT), which exhibited a capacity much higher than that of CuO supported on pristine multiwalled carbon nanotubes (MWCNT) (CuO/PCNT) for catalytically oxidizing AsH3 under ambient conditions. The experimental and theoretical results show that nitric acid steam treatment could induce MWCNT surface structural defects, which facilitated more stable anchoring of CuO and then improved the oxygen activation ability, therefore leading to excellent catalytic performance. Density functional theory (DFT) calculations revealed that the catalytic oxidation of AsH3 proceeded through stepwise dehydrogenation and subsequent recombination with oxygen to form As2O3 as the final product.

Regulating Electron Metal-Support Interaction to Suppress N2O Formation in the Selective Catalytic Oxidation of Ammonia.

N2O is a common byproduct in the selective catalytic oxidation of ammonia, and its generation often needs to be inhibited due to its strong greenhouse effect. In this paper, using Ag/ZSO-Y as a model catalyst, the N2O selectivity was reduced by 30% through modulation of the electron metal-support interaction. The results demonstrate that the work function of the support can be regulated by the content of the doping element. As the Zr content increases in SnO2, the work function of the support decreases. Moreover, there is a positive correlation between the charge transfer amount and the work function of the support. A series of in situ DRIFTS and density functional theory calculations revealed that the -NO and -N reactions are the primary pathways for N2O formation. By adjustment of the work function of the support through varying the Zr doping level, the electronic structure of Ag NPs was further tuned, resulting in an increased reaction energy barrier for -NO and -N reactions, effectively suppressing N2O formation.

Deep Oxidation of Chlorinated VOCs by Efficient Catalytic Peroxide Activation over Nanoconfined Co@NCNT Catalysts.

The catalytic removal of chlorinated VOCs (CVOCs) in gas-solid reactions usually suffers from chlorine-containing byproduct formation and catalyst deactivation. AOP wet scrubber has recently attracted ever-increasing interest in VOC treatment due to its advantages of high efficiency and no gaseous byproduct emission. Herein, the low-valence Co nanoparticles (NPs) confined in a N-doped carbon nanotube (Co@NCNT) were studied to activate peroxymonosulfate (PMS) for efficient CVOC removal in a wet scrubber. Co@NCNT exhibited unprecedented catalytic activity, recyclability, and low Co ion leakage (0.19 mg L-1) for chlorobenzene degradation in a very wide pH range (3-11). The chlorobenzene removal efficiency was kept stable above 90% over Co@NCNT, much higher than that of nonconfined Co@NCNS (45%). The low-valence Co NPs achieved a continuous electron redox cycling (Co0/Co2+ → Co3+ → Co0/Co2+) and greatly promoted the O-O bond dissociation of PMS with the least energy (0.83 eV) inside the channel of Co@NCNT to form abundant HO• and SO4•-. Thus, the deep oxidation of chlorobenzene was achieved without any biphenyl byproducts from the coupling reaction. This study provided a new avenue for designing novel nanoconfined catalysts with outstanding activity, paving the way for the deep oxidation of CVOC waste gas via AOP wet scrubber.