Oriented Assembly of Lead Halide Perovskite Nanocrystals.

Cesium lead halide nanostructures have highly tunable optical and optoelectronic properties. Establishing precise control in forming perovskite single-crystal nanostructures is key to unlocking the full potential of these materials. However, studying the growth kinetics of colloidal cesium lead halides is challenging due to their sensitivity to light, electron beam, and environmental factors like humidity. In this study, in situ observations of CsPbBr3-particle dynamics were made possible through extremely low dose liquid cell transmission electron microscopy, showing that oriented attachment is the dominant pathway for the growth of single-crystal CsPbBr3 architectures from primary nanocubes. In addition, oriented assembly and fusion of ligand-stabilized cubic CsPbBr3 nanocrystals are promoted by electron beam irradiation or introduction of polar additives that both induce partial desorption of the original ligands and polarize the nanocube surfaces. These findings advance our understanding of cesium lead halide growth mechanisms, aiding the controlled synthesis of other perovskite nanostructures.

Biocompatible Silica-Coated Europium-Doped CsPbBr3 Nanoparticles with Luminescence in Water for Zebrafish Bioimaging.

Cesium lead halide (CsPbX3, X = Br, Cl, and I) nanocrystals (NCs) are widely concerned and applied in many fields due to the excellent photoelectric performance. However, the toxicity of Pb and the loss of luminescence in water limit its application in vivo. A stable perovskite nanomaterial with good bioimaging properties is developed by incorporating europium (Eu) in CsPbX3 NCs followed with the surface coating of silica (SiO2) shell (CsPbX3:Eu@SiO2). Through the surface coating of SiO2, the luminescence stability of CsPbBr3 in water is improved and the leakage of Pb2+ is significantly reduced. In particular, Eu doping inhibits the photoluminescence quantum yield reduction of CsPbBr3 caused by SiO2 coating, and further reduces the release of Pb2+. CsPbBr3:Eu@SiO2 nanoparticles (NPs) show efficient luminescence in water and good biocompatibility to achieve cell imaging. More importantly, CsPb(ClBr)3:Eu@SiO2 NPs are obtained by adjusting the halogen components, and green light and blue light are realized in zebrafish imaging, showing good imaging effect and biosafety. The work provides a strategy for advanced perovskite nanomaterials toward biological practical application.

Defect Engineering of Metal Halide Perovskite Nanocrystals via Spontaneous Diffusion of Ag Nanocrystals.

Perovskite nanocrystals (NCs) have emerged as a promising building block for the fabrication of optic-/optoelectronic-/electronic devices owing to their superior characteristics, such as high absorption coefficient, rapid ion mobilities, and tunable energy levels. However, their low structural stability and poor surface passivation have restricted their application to next-generation devices. Herein, a drug delivery system (DDS)-inspired post-treatment strategy is reported for improving their structural stability by doping of Ag into CsPbBr3 (CPB) perovskite NCs; delivery to damaged sites can promote their structural recovery slowly and uniformly, averting the permanent loss of their intrinsic characteristics. Ag NCs are designed through surface-chemistry tuning and structural engineering to enable their circulation in CPB NC dispersions, followed by their delivery to the CPB NC surface, defect-site recovery, and defect prevention. The perovskite-structure healing process through the DDS-type process (with Ag NCs as the drug) is analyzed by a combination of theoretical calculations (with density functional theory) and experimental analyses. The proposed DDS-inspired healing strategy significantly enhances the optical properties and stability of perovskite NCs, enabling the fabrication of white light-emitting diodes.

Elastic Phonon Scattering Dominates Dephasing in Weakly Confined Cesium Lead Bromide Nanocrystals at Cryogenic Temperatures.

Cesium lead halide perovskite nanocrystals (PNCs) have emerged as a potential next-generation single quantum emitter (QE) material for quantum optics and quantum information science. Optical dephasing processes at cryogenic temperatures are critical to the quality of a QE, making a mechanistic understanding of coherence losses of fundamental interest. We use photon-correlation Fourier spectroscopy (PCFS) to obtain a lower bound to the optical coherence times of single PNCs as a function of temperature. We find that 20 nm CsPbBr3 PNCs emit nearly exclusively into a narrow zero-phonon line from 4 to 13 K. Remarkably, no spectral diffusion is observed at time scales of 10 µs to 5 ms. Our results suggest that exciton dephasing in this temperature range is dominated by elastic scattering from phonon modes with characteristic frequencies of 1-3 meV, while inelastic scattering is minimal due to weak exciton-phonon coupling.

Embedded growth of colorful CsPbX3(X = Cl, Br, I) nanocrystals in metal-organic frameworks at Room Temperature.

Herein, we develop a novel strategy for preparing all-inorganic cesium lead halide (CsPbX3, X = Cl, Br, I) perovskite nanocrystals (NCs)@Zn-based metal-organic framework (MOF) composites through interfacial synthesis. The successful embedding of fluorescent perovskite NCs in Zn-MOFs is due to thein situconfined growth, which is attributed to the re-nucleation of water-triggered phase transformation from Cs4PbBr6to CsPbBr3. The controllable synthesis of mixed-halide based composites with various emission wavelength can be achieved by adding the desired amount of halide (Cl or I) salts in the re-nucleation process. More importantly, the anion exchange reaction is inhibited among various composites with different halogen atoms by being trapped in MOFs. Besides, a white light-emitting diode (WLED) is produced using a blue LED chip with the green-emitting and red-emitting composites, which has a color coordinate of (0.3291, 0.3272) and a wide color gamut. This work provides a novel route to achieving perovskite NCs growth in MOFs, which also can be extended to the other NCs embedded in frames as well.

Current status on synthesis, properties and applications of CsPbX3(X = Cl, Br, I) perovskite quantum dots/nanocrystals.

The quantum confinement effect and interesting optical properties of cesium lead halide (CsPbX3; X = Cl, Br, I) perovskite quantum dots (QDs) and nanocrystals (NCs) have given a new horizon to lighting and photonic applications. Given the exponential rate at which scientific results on CsPbX3NCs are published in the last few years, it can be expected that the research in CsPbX3NCs will further receive increasing scientific interests in the near future and possibly lead to great commercial opportunities to realize these materials based practical applications. With the rapid progress in the single-photon emitting CsPbX3QDs and NCs, practical applications of the quantum technologies such as single-photon emitting light-emitting diode, quantum lasers, quantum computing might soon be possible. But to reach at cutting edge of stable perovskite QDs/NCs, the study of fundamental insight and theoretical aspects of crystal design is yet insufficient. Even more, it has aroused many unanswered questions related to the stability, optical and electronic properties of the CsPbX3QDs. Aim of the present review is to illustrate didactically a precise study of recent progress in the synthesis, properties and applications of CsPbX3QDs and NCs. Critical issues that currently restrict the applicability of these QDs will be identified and advanced methodologies currently in the developing queue, to overcome the roadblock, will be presented. And finally, the prospects for future directions will be provided.

Visualization and Studies of Ion-Diffusion Kinetics in Cesium Lead Bromide Perovskite Nanowires.

The facile chemical transformation of metal halide perovskites via ion exchange has been attributed to their "soft" crystal lattices that enable fast ion migration. Kinetic studies of such processes could provide mechanistic insights on the ion migration dynamics. Herein, by using aligned single-crystal nanowires of cesium lead bromide (CsPbBr3) perovskite on epitaxial substrates as platforms, we visualize and investigate the cation or anion interdiffusion kinetics via spatially resolved photoluminescence measurement on heterostructures fabricated by stacking CsPbCl3, MAPbI3, or MAPbBr3 microplates on top of CsPbBr3 nanowires. Time-dependent confocal photoluminescence microscopy and energy-dispersive X-ray spectroscopy showed the solid-state anion interdiffusion readily occurs to result in halide concentration gradients along CsPbBr3-3 xCl3 x ( x = 0-1) nanowires. Quantitative analysis of such composition profiles using Fick's law allowed us, for the first time, to extract interdiffusion coefficients of the chloride-bromide couple and an activation energy of 0.44 ± 0.02 eV for ion diffusion from temperature-dependent studies. In contrast, iodide-bromide interdiffusion is limited, likely due to the complex phase behaviors of mixed alloys of CsPb(Br,I)3. In contrast to the relatively mobile anions, A-site cation interdiffusion across the MAPbBr3/CsPbBr3 junctions was barely observed at room temperature. Our results present a general method to investigate the kinetics of the solid-state ion migration, and the gained insights on ion diffusion can provide guidelines for rationally designing perovskite heterostructures that could lead to new properties for fundamental studies and technological applications.

All-Inorganic CsPbX3 Perovskite Solar Cells: Progress and Prospects.

Recently, lead halide-based perovskites have become one of the hottest topics in photovoltaic research because of their excellent optoelectronic properties. Among them, organic-inorganic hybrid perovskite solar cells (PSCs) have made very rapid progress with their power conversion efficiency (PCE) now at 23.7 %. However, the intrinsically unstable nature of these materials, particularly to moisture and heat, may be a problem for their long-term stability. Replacing the fragile organic group with more robust inorganic Cs+ cations forms the cesium lead halide system (CsPbX3 , X is halide) as all-inorganic perovskites which are much more thermally stable and often more stable to other factors. From the first report in 2015 to now, the PCE of CsPbX3 -based PSCs has abruptly increased from 2.9 % to 17.1 % with much enhanced stability. In this Review, we summarize the field up to now, propose solutions in terms of development bottlenecks, and attempt to boost further research in CsPbX3 PSCs.

Facile synthesis of CsPbBr3/PbSe composite clusters.

In this work, CsPbBr3 and PbSe nanocomposites were synthesized to protect perovskite material from self-enlargement during reaction. UV absorption and photoluminescence (PL) spectra indicate that the addition of Se into CsPbBr3 quantum dots modified the electronic structure of CsPbBr3, increasing the band gap from 2.38 to 2.48 eV as the Cs:Se ratio increased to 1:3. Thus, the emission color of CsPbBr3 perovskite quantum dots was modified from green to blue by increasing the Se ratio in composites. According to X-ray diffraction patterns, the structure of CsPbBr3 quantum dots changed from cubic to orthorhombic due to the introduction of PbSe at the surface. Transmission electron microscopy and X-ray photoemission spectroscopy confirmed that the atomic distribution in CsPbBr3/PbSe composite clusters is uniform and the composite materials were well formed. The PL intensity of a CsPbBr3/PbSe sample with a 1:1 Cs:Se ratio maintained 50% of its initial intensity after keeping the sample for 81 h in air, while the PL intensity of CsPbBr3 reduced to 20% of its initial intensity. Therefore, it is considered that low amounts of Se could improve the stability of CsPbBr3 quantum dots.

Potassium Incorporation for Enhanced Performance and Stability of Fully Inorganic Cesium Lead Halide Perovskite Solar Cells.

Thermally unstable nature of hybrid organic-inorganic perovskites has been a major obstacle to fabricating the long-term operational device. A cesium lead halide perovskite has been suggested as an alternative light absorber, due to its superb thermal stability. However, the phase instability and poor performance are hindering the further progress. Here, cesium lead halide perovskite solar cells with enhanced performance and stability are demonstrated via incorporating potassium cations. Based on Cs0.925K0.075PbI2Br, the planar-architecture device achieves a power conversion efficiency of 10.0%, which is a remarkable record in the field of inorganic perovskite solar cells. In addition, the device shows an extended operational lifetime against air. Our research will stimulate the development of cesium lead halide perovskite materials for next-generation photovoltaics.

Role of Nonradiative Defects and Environmental Oxygen on Exciton Recombination Processes in CsPbBr3 Perovskite Nanocrystals.

Lead halide perovskite nanocrystals (NCs) are emerging as optically active materials for solution-processed optoelectronic devices. Despite the technological relevance of tracing rational guidelines for optimizing their performances and stability beyond their intrinsic resilience to structural imperfections, no in-depth study of the role of selective carrier trapping and environmental conditions on their exciton dynamics has been reported to date. Here we conduct spectro-electrochemical (SEC) experiments, side-by-side to oxygen sensing measurements on CsPbBr3 NCs for the first time. We show that the application of EC potentials controls the emission intensity by altering the occupancy of defect states without degrading the NCs. Reductive potentials lead to strong (60%) emission quenching by trapping of photogenerated holes, whereas the concomitant suppression of electron trapping is nearly inconsequential to the emission efficiency. Consistently, oxidizing conditions result in minor (5%) brightening due to suppressed hole trapping, confirming that electron traps play a minor role in nonradiative decay. This behavior is rationalized through a model that links the occupancy of trap sites with the position of the NC Fermi level controlled by the EC potential. Photoluminescence measurements in controlled atmosphere reveal strong quenching by collisional interactions with O2, which is in contrast to the photobrightening effect observed in films and single crystals. This indicates that O2 acts as a scavenger of photoexcited electrons without mediation by structural defects and, together with the asymmetrical SEC response, suggests that electron-rich defects are likely less abundant in nanostructured perovskites than in the bulk, leading to an emission response dominated by direct interaction with the environment.

Vapor-Phase Epitaxial Growth of Aligned Nanowire Networks of Cesium Lead Halide Perovskites (CsPbX3, X = Cl, Br, I).

With the intense interest in inorganic cesium lead halide perovskites and their nanostructures for optoelectronic applications, high-quality crystalline nanomaterials with controllable morphologies and growth directions are desirable. Here, we report a vapor-phase epitaxial growth of horizontal single-crystal CsPbX3 (X = Cl, Br, I) nanowires (NWs) and microwires (MWs) with controlled crystallographic orientations on the (001) plane of phlogopite and muscovite mica. Moreover, single NWs, Y-shaped branches, interconnected NW or MW networks with 6-fold symmetry, and, eventually, highly dense epitaxial network of CsPbBr3 with nearly continuous coverage were controllably obtained by varying the growth time. Detailed structural study revealed that the CsPbBr3 wires grow along the [001] directions and have the (100) facets exposed. The incommensurate heteroepitaxial lattice match between the CsPbBr3 and mica crystal structures and the growth mechanism of these horizontal wires due to asymmetric lattice mismatch were proposed. Furthermore, the photoluminescence waveguiding and good performance from the photodetector device fabricated with these CsPbBr3 networks demonstrated that these well-connected CsPbBr3 NWs could serve as straightforward platforms for fundamental studies and optoelectronic applications.

From Nonluminescent Cs4PbX6 (X = Cl, Br, I) Nanocrystals to Highly Luminescent CsPbX3 Nanocrystals: Water-Triggered Transformation through a CsX-Stripping Mechanism.

We report a novel CsX-stripping mechanism that enables the efficient chemical transformation of nonluminescent Cs4PbX6 (X = Cl, Br, I) nanocrystals (NCs) to highly luminescent CsPbX3 NCs. During the transformation, Cs4PbX6 NCs dispersed in a nonpolar solvent are converted into CsPbX3 NCs by stripping CsX through an interfacial reaction with water in a different phase. This process takes advantage of the high solubility of CsX in water as well as the ionic nature and high ion diffusion property of Cs4PbX6 NCs, and produces monodisperse and air-stable CsPbX3 NCs with controllable halide composition, tunable emission wavelength covering the full visible range, narrow emission width, and high photoluminescent quantum yield (up to 75%). An additional advantage is that this is a clean synthesis as Cs4PbX6 NCs are converted into CsPbX3 NCs in the nonpolar phase while the byproduct of CsX is formed in water that could be easily separated from the organic phase. The as-prepared CsPbX3 NCs show enhanced stability against moisture because of the passivated surface. Our finding not only provides a new pathway for the preparation of highly luminescent CsPbX3 NCs but also adds insights into the chemical transformation behavior and stabilization mechanism of these emerging perovskite nanocrystals.

Au Exchange or Au Deposition: Dual Reaction Pathways in Au-CsPbBr3 Heterostructure Nanoparticles.

We have designed a facile synthetic strategy for the selective deposition of Au metal on all-inorganic CsPbBr3 perovskite nanocrystals that includes the addition of PbBr2 salt along with AuBr3 salt. PbBr2 is necessary because the addition of Au3+ to solutions of CsPbBr3 nanocrystals otherwise results in the exchange of Au3+ ions from solution with Pb2+ cations within the nanocrystal lattice to produce Cs2AuIAuIIIBr6 nanocrystals with a tetragonal crystal structure and a band gap of about 1.6 eV, in addition to Au metal deposition. Including excess Pb2+ ions in solution prevents the exchange reaction. Au metal deposits on the surface of the nanocrystals to produce the Au-CsPbBr3 heterostructure nanoparticles with an Au particle diameter determined by the Au3+ ion concentration. Fluorescence quenching caused by Au deposition monotonically increases with deposition size, but the fluorescence quantum yield (QY) is significantly greater than if any cation exchange has occurred. An optimized synthesis can produce Au-CsPbBr3 nanoparticles with 70% QY and no evidence of cation exchange.

Probing Linewidths and Biexciton Quantum Yields of Single Cesium Lead Halide Nanocrystals in Solution.

Cesium lead halide (CsPbX3, X = Cl, Br, I) perovskite nanocrystals (PNCs) have recently become a promising material for optoelectronic applications due to their high emission quantum yields and facile band gap tunability via both halide composition and size. The spectroscopy of single PNCs enhances our understanding of the effect of confinement on excitations in PNCs in the absence of obfuscating ensemble averaging and can also inform synthetic efforts. However, single PNC studies have been hampered by poor PNC photostability under confocal excitation, precluding interrogation of all but the most stable PNCs, and leading to a lack of understanding of PNCs in the regime of high confinement. Here, we report the first comprehensive spectroscopic investigation of single PNC properties using solution-phase photon-correlation methods, including both highly confined and blue-emitting PNCs, previously inaccessible to single NC techniques. With minimally perturbative solution-phase photon-correlation Fourier spectroscopy (s-PCFS), we establish that the ensemble emission linewidth of PNCs of all sizes and compositions is predominantly determined by the intrinsic single PNC linewidth (homogeneous broadening). The single PNC linewidth, in turn, dramatically increases with increasing confinement, consistent with what has been found for II-VI semiconductor nanocrystals. With solution-phase photon antibunching measurements, we survey the biexciton-to-exciton quantum yield ratio (BX/X QY) in the absence of user-selection bias or photodegradation. Remarkably, the BX/X QY ratio depends both on the PNC size and halide composition, with values between ∼2% for highly confined bromide PNCs and ∼50% for intermediately confined iodide PNCs. Our results suggest a wide range of underlying Auger rates, likely due to transitory charge carrier separation in PNCs with relaxed confinement.

Linearly Manipulating Color Emission via Anion Exchange Technology for High Performance Amplified Spontaneous Emission of Perovskites.

The most attractive advantages of all-inorganic cesium lead halide perovskites are their optical gain over broad spectral ranges through the visible spectrum, so are well suited to use in tunable lasers or broadband amplifiers. Most reported anion exchange reactions face a challenge to achieve the desired halogen-variable perovskites due to rapid and uncontrollable reactions and difficulty to synthesize directly. In this study, a simple vapor/solid anion exchange strategy is demonstrated for controlling the reaction process and realizing a wide range tuning of band gap and amplified spontaneous emission (ASE) wavelength, which exhibits a temperature-dependent anion exchange rate. By optimizing the reaction temperature at 90 °C, the ASE wavelength can be linearly manipulated by just controlling the reaction time. A clear quantitative relationship between ASE peak position and reaction time is achieved. Compares with the CsPbClBr2 film obtained via the liquid phase anion exchange method, the fabricated perovskite films obtained by vapor/solid anion exchange technology exhibit superior film quality and enhanced ASE performance. This work may have applications in the future using facile and controllable techniques to develop high-quality full-color visible lasers.

Synthesis of cesium lead halide perovskite/zinc oxide (CsPbX3/ZnO, X= Br, I) as heterostructure photocatalyst with improved activity for heavy metal degradation.

Inorganic perovskites have been recognized as highly potent materials for the display and medical industries due to their outstanding features. However, there haven't been many reports on their implications as a photocatalyst for the removal of heavy metals. Photocatalysis has been regarded as a significant approach for the removal of pollutants because of its great sustainability, improved efficiency, and reduced energy consumption. Here, we applied inorganic cesium lead halides (Br and I) with zinc oxide heterostructure as a photocatalyst for the first time. The heterostructure has been synthesized by the traditional hot injection strategy and its photocatalytic activity was systematically investigated. Interestingly, the CsPbX3/ZnO heterostructure as a photocatalyst has a homogeneous geometry and possesses an excellent degradation efficiency of over 50% under xenon UV-Visible light. The CsPbX3/ZnO catalyst carries superior oxidation/reduction properties and ionic conductivity due to the synergistic photogenerated charge carrier and interaction between CsPbX3 and ZnO. The recycling experiment showed the good stability of the catalysts. These findings suggest that inorganic lead halide heterostructure has the potential to be used for heavy metal degradation and water pollution removal catalysts.

Wavelength Selective Solar Cells Using Triple Cation Perovskite.

Perovskite materials offer high-efficiency low-cost solar cells and applications versatility. We report on cesium-based hybrid perovskite solar cells with wavelength-selective properties ranging from 500 nm (UV-VIS) to 800 nm (IR). The band gap tuning was achieved through composition changes of mainly lead(II) iodide PbI2 and lead(II) bromide PbBr2. The optical spectra of the developed materials were studied, including the photoluminescence (PL), optical transparency, X-ray diffraction and external quantum efficiency for samples prepared under different compositions. It was found that a high content of iodine displayed a photoluminescence (PL) peak at 790 nm, whereas a high content of bromine showed a PL peak at 548 nm. The combined composition mixture of PbI2 and PbBr2 can be fine-tuned to prepare materials that absorbed light in the visible range (640-660 nm) or other selective wavelengths in the range from 500 to 800 nm. The illuminated current-voltage characteristics of the solar cells were carried out under the AM 1.5 condition using an ABET solar simulator with a reference solar cell for comparison and control. The average efficiency of the fabricated solar cells ranged from 3.5% to 15.5%, depending on perovskite composition. Wavelength-selective solar cells have potential applications in smart windows, building of integrated PVs and solar-operated greenhouses.

Kinetic Control for Continuously Tunable Lattice Parameters, Size, and Composition during CsPbX3 (X = Cl, Br, I) Nanorod Synthesis.

The fast kinetics of all-inorganic CsPbX3 (X = Cl, Br, or I) nanocrystal growth entail that many synthetic strategies for structural control established in other semiconductor systems do not apply. Rather, products are often determined by thermodynamic factors, limiting the range of synthetic outcomes and functionality. In this study, we show how reaction kinetics are significantly slowed if nanocrystals are prepared using a dual injection strategy that moderates the crucial interaction between cesium and halide during nucleation and growth. The result is highly uniform nanorod or cuboid nanocrystals with a controllable size and aspect ratio across the quantum confinement regime, obtainable for both pure and mixed halide compositions. Further, the crystal lattice is continuously tunable between the tetragonal (I4/mcm) and orthorhombic (Pbnm) phases, independent of the overall nanorod morphology, enabling significantly more sophisticated structure-property relationships that can be tailored during this kinetically controlled synthesis.

Low Threshold and Ultrastability of One-Step Air-Processed All-Inorganic CsPbX3 Thin Films toward Full-Color Visible Amplified Spontaneous Emission.

All-inorganic perovskites (CsPbX3) with the merits of high stability and remarkable optical gain property are attractive for achieving on-chip coherent light sources. Unfortunately, traditional solution-processed CsPbX3 films suffer from inevitable poor surface integrity and pinhole defects, severely hindering their optical properties. Here, from the perspective of precursor solution chemistry, we use an ionic liquid solvent methylammonium acetate (MAAc) to fabricate compact, pinhole-free, and smooth CsPbX3 thin films in a one-step air process without antisolvent treatment. Optically pumped amplified spontaneous emission (ASE) with a straightforward visible spectral tunability (418-725 nm) is achieved under both nanosecond and femtosecond laser excitation. For the representative CsPbBr3 films, the threshold reaches down to 11.4 µJ cm-2 under nanosecond laser pumping, which is comparable to the value under one-photon femtosecond pumping. The long gain lifetime up to 258.2 ps is revealed by transient absorption spectroscopy. Most importantly, the films show excellent optical stability and humidity stability with no obvious degradation under the pulsed laser irradiation for more than 210 min, stable ASE output under 95% high humidity, and conspicuous ASE after 1000 h of storage in air condition without encapsulation. These results demonstrate that the method of fabricating inorganic perovskite films with an ionic liquid solvent is promising in developing high-performance full-color visible lasers.