Chemical bonding dictates drastic critical temperature difference in two seemingly identical superconductors.

Though YB6 and LaB6 share the same crystal structure, atomic valence electron configuration, and phonon modes, they exhibit drastically different phonon-mediated superconductivity. YB6 superconducts below 8.4 K, giving it the second-highest critical temperature of known borides, second only to MgB2. LaB6 does not superconduct until near-absolute zero temperatures (below 0.45 K), however. Though previous studies have quantified the canonical superconductivity descriptors of YB6's greater Fermi-level (Ef) density of states and higher electron-phonon coupling (EPC), the root of this difference has not been assessed with full detail of the electronic structure. Through chemical bonding, we determine low-lying, unoccupied 4f atomic orbitals in lanthanum to be the key difference between these superconductors. These orbitals, which are not accessible in YB6, hybridize with π B-B bonds and bring this π-system lower in energy than the σ B-B bonds otherwise at Ef. This inversion of bands is crucial: the optical phonon modes we show responsible for superconductivity cause the σ-orbitals of YB6 to change drastically in overlap, but couple weakly to the π-orbitals of LaB6. These phonons in YB6 even access a crossing of electronic states, indicating strong EPC. No such crossing in LaB6 is observed. Finally, a supercell (the M k-point) is shown to undergo Peierls-like effects in YB6, introducing additional EPC from both softened acoustic phonons and the same electron-coupled optical modes as in the unit cell. Overall, we find that LaB6 and YB6 have fundamentally different mechanisms of superconductivity, despite their otherwise near-identity.

Chemical interactions that govern the structures of metals.

Most metals adopt simple structures such as body-centered cubic (BCC), face-centered cubic (FCC), and hexagonal close-packed (HCP) structures in specific groupings across the periodic table, and many undergo transitions to surprisingly complex structures on compression, not expected from conventional free-electron-based theories of metals. First-principles calculations have been able to reproduce many observed structures and transitions, but a unified, predictive theory that underlies this behavior is not yet in hand. Discovered by analyzing the electronic properties of metals in various lattices over a broad range of sizes and geometries, a remarkably simple theory shows that the stability of metal structures is governed by electrons occupying local interstitial orbitals and their strong chemical interactions. The theory provides a basis for understanding and predicting structures in solid compounds and alloys over a broad range of conditions.

Electronic structure of Li1,2,3 +,0,- and nature of the bonding in Li2,3 +,0,.

The current study of the small lithium molecules Li2 +,0,- and Li3 +,0,- focuses on the nature of the bonding in these molecules as well as their structures and energetics (bond energies, ionization energies, and electron affinities). Valence CASSCF (2s,2p) calculations incorporate nondynamical electron correlation in the calculations, while the corresponding multireference configuration interaction and coupled cluster calculations incorporate dynamical electron correlation. Treatment of nondynamical correlation is critical for properly describing the Li2,3 +,0,- molecules as well as the Li- anion with dynamical correlation, in general, only fine-tuning the predictions. All lithium molecules and ions are bound, with the Li3 + and Li2 + ions being the most strongly bound, followed by Li3 - , Li2 , Li2 - and Li3 . The minimum energy structures of Li3 +,0,- are, respectively, an equilateral triangle, an isosceles triangle, and a linear structure. The results of SCGVB calculations are analyzed to obtain insights into the nature of the bonding in these molecules. An important finding of this work is that interstitial orbitals, a concept first put forward by McAdon and Goddard in 1985, play an essential role in the bonding of all lithium molecules considered here except for Li2 . The interstitial orbitals found in the Li3 +,0 molecules likely give rise to the non-nuclear attractors/maxima observed in these molecules.

Decoding energy decomposition analysis: Machine-learned Insights on the impact of the density functional on the bonding analysis.

The concept of chemical bonding is a crucial aspect of chemistry that aids in understanding the complexity and reactivity of molecules and materials. However, the interpretation of chemical bonds can be hindered by the choice of the theoretical approach and the specific method utilized. This study aims to investigate the effect of choosing different density functionals on the interpretation of bonding achieved through energy decomposition analysis (EDA). To achieve this goal, a data set was created, representing four bonding groups and various combinations of functionals and dispersion correction schemes. The calculations showed significant variation among the different functionals for the EDA terms, with the dispersion correction terms exhibiting the highest variability. More information was extracted by using machine learning in combination with dimensionality reduction on the data set. Results indicate that, despite the differences in the EDA terms obtained from different functionals, the functional has the least significant impact, suggesting minimal influence on the bonding interpretation.

Chemical bonding in Uranium-based materials: A local vibrational mode case study of Cs 2 UO 2 Cl 4 and UCl 4 crystals.

The Local Vibrational Mode Analysis, initially applied to diverse molecular systems, was extended to periodic systems in 2019. This work introduces an enhanced version of the LModeA software, specifically designed for the comprehensive analysis of two and three-dimensional periodic structures. Notably, a novel interface with the Crystal package was established, enabling a seamless transition from molecules to periodic systems using a unified methodology. Two distinct sets of uranium-based systems were investigated: (i) the evolution of the Uranyl ion (UO 2 2 + ) traced from its molecular configurations to the solid state, exemplified by Cs 2 UO 2 Cl 4 and (ii) Uranium tetrachloride (UCl 4 ) in both its molecular and crystalline forms. The primary focus was on exploring the impact of crystal packing on key properties, including IR and Raman spectra, structural parameters, and an in-depth assessment of bond strength utilizing local mode perspectives. This work not only demonstrates the adaptability and versatility of LModeA for periodic systems but also highlights its potential for gaining insights into complex materials and aiding in the design of new materials through fine-tuning.

Biomass-Derived Carbon Quantum Dots Chemical Bonding with Sn-Doped Bi2 O2 CO3 Endowed Fast Carriers' Dynamics and Stabilized Oxygen Vacancies for Efficient Decontamination of Combined Pollutants.

Surface defects on photocatalysts could promote carrier separation and generate unsaturated sites for chemisorption and reactant activation. Nevertheless, the inactivation of oxygen vacancies (OVs) would deteriorate catalytic activity and limit the durability of defective materials. Herein, bagasse-derived carbon quantum dots (CQDs) are loaded on the Sn-doped Bi2 O2 CO3 (BOC) via hydrothermal procedure to create Bi─O─C chemical bonding at the interface, which not only provides efficient atomic-level interfacial electron channels for accelerating carriers transfer, but also enhances durability. The optimized Sn-BOC/CQDs-2 achieves the highest photocatalytic removal efficiencies for levofloxacin (LEV) (88.7%) and Cr (VI) (99.3%). The elimination efficiency for LEV and Cr (VI) from the Sn-BOC/CQDs-2 is maintained at 55.1% and 77.0% while the Sn-BOC is completely deactivated after four cycle tests. Furthermore, the key role of CQDs in stabilization of OVs is to replace OVs as the active center of H2 O and O2 adsorption and activation, thereby preventing reactant molecules from occupying OVs. Based on theoretical calculations of the Fukui index and intermediates identification, three possible degradation pathways of LEV are inferred. This work provides new insight into improving the stability of defective photocatalysts.

Polar covalent apex-base bonding in borapyramidanes probed by solid-state NMR and DFT calculations.

Pyramidane molecules have attracted chemists for many decades due to their regular shape, high symmetry and their correspondence in the macroscopic world. Recently, experimental access to a number of examples has been reported, in particular the rarely reported square pyramidal bora[4]pyramidanes. To describe the bonding situation of the nonclassical structure of pyramidanes, we present solid-state Nuclear Magnetic Resonance (NMR) as a versatile tool for deciphering such bonding properties for three now accessible bora[4]pyramidane and dibora[5]pyramidane molecules. 11 B solid-state NMR spectra indicate that the apical boron nuclei in these compounds are strongly shielded (around -50 ppm vs. BF3 -Et2 O complex) and possess quadrupolar coupling constants of less than 0.9 MHz pointing to a rather high local symmetry. 13 C-11 B spin-spin coupling constants have been explored as a measure of the bond covalency in the borapyramidanes. While the carbon-boron bond to the -B(C6 F5 )2 substituents of the base serves as an example for a classical covalent 2-center-2-electron (2c-2e) sp2 -carbon-sp2 -boron σ-bond with 1 J(13 C-11 B) coupling constants in the order of 75 Hz, those of the boron(apical)-carbon(basal) bonds in the pyramid are too small to measure. These results suggest that these bonds have a strongly ionic character, which is also supported by quantum-chemical calculations.

Understanding the Chemical Bond in Semiconductor/MXene Composites: TiO2 Clusters Anchored on the Ti2C MXene Surface.

First-principles calculations on titania clusters (TiO2)n (n=5 and 10) supported on the pristine Ti2C (0001) surface were carried out to understand the properties of semiconductor/MXene composites with implications in (photo)-catalysis. The reported results reveal a high exothermic interaction accompanied by a substantial charge transfer with a concomitant, notorious, deformation of the titania nanoclusters. The analysis of the density of states analysis of the composite systems evidences a metallic character with titania related states crossing the Fermi level. The picture of the chemical bonds is completed by the analysis of X-Ray Photoelectron Spectra (XPS) features, evidencing clear shifts of the C(1s) and O(1s) related peaks relative to the isolated systems that have a quite complex origin. This detailed analysis provides insights to experimentalists interested in the design and synthesis of these systems with possible applications in catalysis.

More Electropositive is More Electronegative: Atom Size Determines C=X Group Electronegativity.

Opposite to what one might expect, we find that the C=X group can become effectively more, not less, electronegative when the Pauling electronegativity of atom X decreases down Groups 16, 15, and 14 of the Periodic Table. Our quantum-chemical analyses, show that, and why, this phenomenon is a direct consequence of the increasing size of atom X down a group. These findings can be applied to tuning and improving the hydrogen-bond donor strength of amides H2 NC(=X)R by increasingly withdrawing density from the NH2 group. A striking example is that H2 NC(=SiR2 )R is a stronger hydrogen-bond donor than H2 NC(=CR2 )R.

Classical versus Collective Interactions in Asymmetric Trigonal Bipyramidal Alkaline Metal-Boron Halide Complexes.

Collective interactions are a novel type of chemical bond formed between metals and electron-rich substituents around an electron-poor central atom. So far only a limited number of candidates for having collective interactions are reported. In this work, we extend the newly introduced concept of collective bonding to a series of neutral boron complexes with the general formula M2BX3 (M=Li, Na, and K; X=F, Cl, and Br). Our state-of-the-art ab initio computations suggest that these complexes form trigonal bipyramidal structures with a D3h to C3v distortion along the C3 axis of symmetry. The BX3 unit in the complexes distorts from planar to pyramidal akin to a sp3 hybridized atom. Interestingly, the interaction of the metals with the pyramidal side of BX3, where the lone pair in a hypothetical [BX3]2- should be located, is weaker than the interactions of metals with the inverted side, i. e., the middle of three halogen atoms. The origin of this stronger interaction can be explained by the formation of collective interactions between metals and halogen atoms as we explored via energy decomposition within the context of the theory of interacting quantum atoms, IQA.

Quantification of the donor-acceptor character of ligands by the effective fragment orbitals.

Metal-ligand interactions are at the heart of transition metal complexes. The Dewar-Chat-Duncanson model is often invoked, whereby the metal-ligand bonding is decomposed into the simultaneous ligand metal electron donation and the metal ligand back-donation. The separate quantification of both effects is not a trivial task, neither from experimental or computational exercises. In this work we present the effective fragment orbitals (EFOs) and their occupations as a general procedure beyond the Kohn-Sham density functional theory (KS-DFT) framework for the identification and quantification of donor-acceptor interactions, using solely the wavefunction of the complex. Using a common Fe(II) octahedral complex framework, we quantify the sigma-donor, pi-donor and pi-acceptor character for a large and chemically diverse set of ligands, by introducing the respective descriptors σd, πd and πa. We also explore the effect of the metal size, coordination number, and spin state on the donor/acceptor features. The spin-state is shown to be the most critical effect, inducing a systematic decrease of the sigma donation and pi-backdonation going from low spin to high spin. Finally, we illustrate the ability of the EFOs to rationalize the Tolman electronic parameter and the trans influence in planar square complexes in terms of these new descriptors.

Current opinion on the prospect of mapping electronic orbitals in the transmission electron microscope: State of the art, challenges and perspectives.

The concept of electronic orbitals has enabled the understanding of a wide range of physical and chemical properties of solids through the definition of, for example, chemical bonding between atoms. In the transmission electron microscope, which is one of the most used and powerful analytical tools for high-spatial-resolution analysis of solids, the accessible quantity is the local distribution of electronic states. However, the interpretation of electronic state maps at atomic resolution in terms of electronic orbitals is far from obvious, not always possible, and often remains a major hurdle preventing a better understanding of the properties of the system of interest. In this review, the current state of the art of the experimental aspects for electronic state mapping and its interpretation as electronic orbitals is presented, considering approaches that rely on elastic and inelastic scattering, in real and reciprocal spaces. This work goes beyond resolving spectral variations between adjacent atomic columns, as it aims at providing deeper information about, for example, the spatial or momentum distributions of the states involved. The advantages and disadvantages of existing experimental approaches are discussed, while the challenges to overcome and future perspectives are explored in an effort to establish the current state of knowledge in this field. The aims of this review are also to foster the interest of the scientific community and to trigger a global effort to further enhance the current analytical capabilities of transmission electron microscopy for chemical bonding and electronic structure analysis.

Bonding character of intermediates in on-surface Ullmann reactions revealed with energy decomposition analysis.

On-surface synthesis has become a thriving topic in surface science. The Ullmann coupling reaction is the most applied synthetic route today, but the nature of the organometallic intermediate is still under discussion. We investigate the bonding nature of prototypical intermediate species (phenyl, naphthyl, anthracenyl, phenanthryl, and triphenylenyl) on the Cu(111) surface with a combination of plane wave and atomic orbital basis set methods using density functional theory calculations with periodic boundary conditions. The surface bonding is shown to be of covalent nature with a polarized shared-electron bond supported by π-back donation effects using energy decomposition analysis for extended systems (pEDA). The bond angle of the intermediates is determined by balancing dispersion attraction and Pauli repulsion between adsorbate and surface. The latter can be significantly reduced by adatoms on the surface. We furthermore investigate how to choose computational parameters for pEDA of organic adsorbates on metal surfaces efficiently and show that bonding interpretation requires consistent choice of the density functional.

Computational investigation of functionalized carbenes on dinitrogen activation.

Activation of the dinitrogen triple bond is a crucial step in the overall fixation of atmospheric nitrogen into usable forms for industrial and biological applications. Current synthetic catalysts incorporate metal ions to facilitate the activation and cleavage of dinitrogen. The high price of metal-based catalysts and the challenge of catalyst recovery during industrial catalytic processes has led to increasing interest in metal-free catalysts. One step toward metal-free catalysis is the use of frustrated Lewis pairs (FLPs). In this study, we have examined 18 functionalized carbenes as FLPs to elucidate the influence of steric and electronic effects on the activation of dinitrogen. To test the effects of functionalization on dinitrogen activation, we have performed density functional theory (DFT), multireference, non and extended transition state-natural orbital for chemical valence (ETS-NOCV) calculations. Our results suggest that functional groups which introduce strong electron-withdrawing effects and/or engage in extended π/π* systems lead to the lowering of the dissociation energy of the dinitrogen bond, which further contributes to greater nitrogen activation. We conjecture that these effects are due to enhanced back-bonding capability of the p orbital of the carbene carbon atoms to the adjacent nitrogen atoms (increasing Lewis basicity of the carbene carbon atom) and enhanced stability of dissociated products. Our concluding remarks include opportunities to extend this activation study to explore the entire catalytic cycle with promising functionalized carbenes for experimental evaluation.

Open shell versus closed shell bonding interaction in cyclopropane derivatives: EDA-NOCV analyses.

Cyclopropane ring is a very common motif in organic/bio-organic compounds. The chemical bonding of this strained ring is taught to all chemistry students. This three-membered cyclic, C3 ring is quite reactive which has attracted both, synthetic and theoretical chemists to rationalize/correlate its stability and bonding with its reactivity and physical properties over a century. There are a few bonding models (mainly the Bent-Bond model and Walsh model) of this C3 ring that are debated to date. Herein, we have carried out energy decomposition analysis coupled with natural orbital for chemical valence (EDA-NOCV) to study the two most reactive bonds of cyclopropane rings of 49 different organic compounds containing different functional groups to obtain a much deeper bonding insight toward a more general bonding model of this class of compounds. The EDA-NOCV analyses of fragment orbitals and susequent bond formation revealed that the nature of the CC bond of the cyclopropane (splitting two bonds at a time out of three CC bonds) ring is preferred to form two dative covalent CC bonds (between a singlet olefin-fragment and an excited singlet carbene-fragment with a vacant sp2 orbital and a filled p-orbital) for the majority (37/49) of compounds over two covalent electron sharing bonds in some (7/49) compounds (between an excited triplet olefin and triplet carbene), while a few (5/49) compounds show flexibility to adopt either the electron sharing or dative covalent bond as both are equally possible. The effects of functional groups on the nature of chemical bond in cyclopropane rings have been studied in detail. Our bonding analyses are in line with the QTAIM analyses which produce small negative values of the Laplacian, significantly positive values of bond ellipticity, and accumulation of electron densities around the ring critical point of C3 -rings. These corresponding QTAIM parameters of C3 -rings are quite different for CC single bonds of normal hydrocarbons as expected. The chemical bonding in the majority of cyclopropane rings can be very similar to those of metal-olefin systems.

Toward the High-Performance Lithium Primary Batteries by Chemically Modified Fluorinate Carbon with δ-MnO2.

Li/CFx battery is one of the most promising lithium primary batteries (LPBs) which yields the highest energy density but with poor rate capability. This Achilles'' heel hinders the large-scale applications of Li/CFx batteries. This work first reports a facile chemical modification method of CFx with δ-MnO2 . Having benefited from the chemical bonding, the electrochemical performance at high-rate discharge is remarkably enhanced without compromising the specific capacity. The coin cells exhibit an energy density of 1.94 × 103  Wh kg-1 at 0.2 C, which is approaching the theoretical energy density of commercial fluorinated graphite (2.07 × 103  Wh kg-1 ). A power density of 5.49 × 104  W kg-1 at 40 C associated with an energy density of 4.39 × 102  Wh kg-1 , which is among the highest value of Li/CFx batteries, are obtained. Besides, the punch batteries achieve an ultrahigh power density of 4.39 × 104  W kg-1 with an energy density of 7.60 × 102  Wh kg-1 at 30 C. The intrinsic reasons for this outstanding electrochemical performance, which are known as the fast Li+ diffusion kinetics guided by thin δ-MnO2 flakes and the low formation energy barrier caused by chemical bonding, are explored by the galvanostatic intermittent titration technique (GITT) and theoretical calculations.

Chalcogen Atom Size Dictates Stability of Benzene-1,3,5-triamide Polymers: Overlooked Role of Geometrical Fit for Enhanced Hydrogen Bonding.

Our quantum chemical analyses elucidated how the replacement of O in the amide bonds of benzene-1,3-5-tricarboxamides (OBTAs) with the larger chalcogens S and Se enhances the intermolecular interactions and thereby the stability of the obtained hydrogen-bonded supramolecular polymers due to two unexpected reasons: i) the SBTA and SeBTA monomers have a better geometry for self-assembly and ii) induce stronger covalent (hydrogen-bond) interactions besides enhanced dispersion interactions. In addition, it is shown that the cooperativity in benzene-1,3,5-triamide (BTA) self-assembly is caused by charge separation in the σ-electronic system following the covalency in the hydrogen bonds.

Polymer Nanoantidotes.

Intoxication is one of the most common causes of accidental death globally. Although some antidotes capable of neutralizing the toxicity of certain xenobiotics have become well established, the current reality is that clinicians primarily rely on nonspecific extracorporeal techniques to remove toxins. Nano-intervention strategies in which nanoantidotes neutralize toxicity in situ via physical interaction, chemical bonding, or biomimetic clearance have begun to show clinical potential. However, most nanoantidotes remain in the proof-of-concept stage, and the difficulty of constructing clinical relevance models and the unclear pharmacokinetics of nanoantidotes hinder their translation to clinic. This Concept reviews the detoxification mechanisms of polymer nanoantidotes and predicts the opportunities and challenges associated with their clinical application.

Ge32 Co9-x : Creating "Empty" Space by High Pressure.

The compound Ge32 Co9-x (x=0.54(6), a=10.9861(3) Å, space group Im 3 ‾ $\bar 3$ m) prepared under high pressure and at high temperature is metastable under ambient conditions. It crystallizes in a new structure type, Pearson symbol cI82-1.08. The crystal structure represents a slightly distorted cubic primitive arrangement of germanium atoms with part of the Ge cubes filled by cobalt. Analysis of the chemical bonding by real-space methods revealed three-core cluster units Ge16 Co3 and seemingly empty regions comprising either covalent inter-polyhedral Ge-Ge bonds or lone-pairs located at the germanium atoms. The electrical conductivity is metal-like.

Structural Complexity in the Apparently Simple Crystal Structure of Be2 Ru.

The structural features of the hexagonal layered crystal structure of Be2 Ru (a=5.7508(3) Å, c=3.0044(2) Å, space group P 6 ‾ ${\bar{6}}$ 2m) were investigated by single crystal X-ray diffraction and transmission electron microscopy (TEM). The residual electron density and high-resolution TEM images show that the real structure can be described as an intergrowth of the main hexagonal matrix of the Fe2 P type with minor orthorhombic inclusions of its stacking variants. Such atomic arrangement is stabilized by the charge transfer from Be to Ru and by a system of polar three- and four-atomic bonds involving both components. The calculated electronic density of states (DOS) of Be2 Ru revealed, contrarily to typical intermetallic compounds, a pseudo gap (dip) in the vicinity of the Fermi level. The temperature dependence of the electrical resistivity of Be2 Ru shows metal behaviour in agreement with the non-zero DOS at the Fermi level.