RESUMO
The conversion of CO2 into liquid fuels, using only sunlight and water, offers a promising path to carbon neutrality. An outstanding challenge is to achieve high efficiency and product selectivity. Here, we introduce a wireless photocatalytic architecture for conversion of CO2 and water into methanol and oxygen. The catalytic material consists of semiconducting nanowires decorated with core-shell nanoparticles, with a copper-rhodium core and a chromium oxide shell. The Rh/CrOOH interface provides a unidirectional channel for proton reduction, enabling hydrogen spillover at the core-shell interface. The vectorial transfer of protons, electrons, and hydrogen atoms allows for switching the mechanism of CO2 reduction from a proton-coupled electron transfer pathway in aqueous solution to hydrogenation of CO2 with a solar-to-methanol efficiency of 0.22%. The reported findings demonstrate a highly efficient, stable, and scalable wireless system for synthesis of methanol from CO2 that could provide a viable path toward carbon neutrality and environmental sustainability.
RESUMO
The regulation of the crystal structure of oxygen evolution cocatalyst (OEC) is a promising strategy for enhancing the photoelectrochemical efficiency of photoanodes. However, the prevailing regulating approach typically requires a multistep procedure, presenting a significant challenge for maintaining the structural integrity and performance of the photoanode. Herein, FeOOH with a local disordered structure is directly grown on a CdIn2S4 (CIS) photoanode via a simple and mild sonochemical approach. By modulating the localized supersaturation of Ni ions, ultrasonic cavitation induces Ni ions to participate in the nucleation and growth of FeOOH clusters to cause local disorder of FeOOH. Consequently, the local disordered FeOOH facilitates the exposure of additional active sites, boosting OER kinetics and extending charge carrier lifetimes. Finally, the optimal photoanode reaches 4.52 mA cm-2 at 1.23 VRHE, and the onset potential shifts negatively by 330 mV, exhibiting excellent performance compared with that of other metal sulfide-based photoelectrodes reported thus far. This work provides a mild and controllable sonochemical method for regulating the phase structure of OECs to construct high-performance photoanodes.
RESUMO
Bismuth vanadate (BiVO4), as a promising photoanode for photoelectrochemical (PEC) water splitting, suffers from poor charge separation efficiency and light absorption efficiency. Herein, iron oxychloride (FeOCl) is introduced as a novel cocatalyst simply grafted on BiVO4 to construct an integrated photoanode, enhancing PEC performance. The optimized FeOCl/BiVO4 photoanode exhibits a superior photocurrent density value of 5.23 mA cm-2 at 1.23 V versus reversible hydrogen electrode (RHE) under AM 1.5G illuminations. From experimental analysis, such high PEC performance is ascribed to the unique properties of FeOCl, facilitating charge transport, increasing light absorption efficiency, and promoting water oxidation kinetics. Density functional theory calculations further confirm that FeOCl optimizes the Gibbs free energy of H and O-containing intermediates (OOH*) during PEC processes, boosting the catalytic kinetics of PEC water splitting. This work presents FeOCl as a promising catalyst for constructing high efficient PEC water-splitting photoanodes.
RESUMO
Hematite is a promising photoanode material for photoelectrochemical water-splitting technology. However, the low current density associated with the low conductivity, low charge carrier mobility, and poor oxygen evolution catalytic activity is a challenging issue for the material. In this study, the challenge is addressed by introducing Germanium (Ge) doping, coupled with the use of FeCoNi-Bi as a co-catalyst. Ge doping not only increases the conductivity and charge carrier concentration of the hematite photoanode, but also induces nanopores, thereby expanding its electrochemical reactive surface area to facilitate the oxygen evolution reaction. In the meantime, the FeCoNi-Bi cocatalyst electrodeposited onto the surface of Ge-doped hematite, improves the oxygen evolution reaction performance. As a result, the obtained photoanode achieves a photocurrent density of 2.31 mA cm-2 at 1.23 VRHE, which is three times higher than that of hematite (0.72 mA cm-2). Moreover, a new analytical method is introduced to scrutinize both the positive and negative effects of Ge doping and FeCoNi-Bi cocatalyst on the photoanode performance by decoupling the photoelectrochemical process steps. Overall, this study not only enhances the performance of hematite photoanodes but also guides their rational design and systematic assessment.
RESUMO
Loading cocatalysts onto semiconductors is one of the most popular strategies to inhibit charge recombination, but the efficiency is generally hindered by the localized built-in electric field and the weakly connected interface. Here, this work designs and synthesizes a 1D P-doped CdS nanowire/Ni2P heterojunction with gradient doped P to address the challenges. In the composite, the gradient P doping not only creates a funneled bandgap structure with a built-in electric field oriented from the bulk of P-CdS to the surface, but also facilitates the formation of a tightly connected interface using the co-shared P element. Consequently, the photogenerated charge carriers are enabled to be pumped from inside to surface of the P-CdS and then smoothly across the interface to the Ni2P. The as-obtained P-CdS/Ni2P displays high visible-light-driven H2 evolution rate of ≈8265 µmol g-1 h-1, which is 336 times and 120 times as that of CdS and P-CdS, respectively. This work is anticipated to inspire more research attention for designing new gradient-doped semiconductor/cocatalyst heterojunction photocatalysts with bridged interface for efficient solar energy conversion.
RESUMO
This study explores the optimal morphology of photochemical hydrogen evolution catalysts in a one-dimensional system. Systematic engineering of metal tips on precisely defined CdSe@CdS dot-in-rods is conducted to exert control over morphology, composition, and both factors. The outcome yields an optimized configuration, a Au-Pt core-shell structure with a rough Pt surface (Au@r-Pt), which exhibits a remarkable fivefold increase in quantum efficiency, reaching 86% at 455 nm and superior hydrogen evolution rates under visible and AM1.5G irradiation conditions with prolonged stability. Kinetic investigations using photoelectrochemical and time-resolved measurements demonstrate a greater extent and extended lifetime of the charge-separated state on the tips as well as rapid water reduction kinetics on high-energy surfaces. This approach sheds light on the critical role of cocatalysts in hybrid photocatalytic systems for achieving high performance.
RESUMO
This paper describes a simple phyto-remediation of feather-like silver/copper bi-matrix (BMs) was constructed by employing pommagrant waste peel (PWP) extract as crucial role of reducing agent and chelating agents. Numerous strategies, including UV-Visible, XRD, SEM-EDX, and TEM and BET isotherm were used to analysis the optical, structural, surface area and functional properties. Ag/Cu BPNMs of TEM characterization shows feather-like architectural features with constrained size and shape. The Ag/Cu co-catalytic nanoparticles have a particle size of 34-64 nm. The photocatalytic efficiency of Ag/Cu BMs was investigated using a garment dye, Congo red (CR), at successive time intervals under halogen lamp exposure. For Ag/Cu bimetallic nanoparticles, the photocatalytic degradation rate was recorded to be 100% after 40 min which is caused by adsorption of Congo red dye molecules on Ag/Cu and their degradation by reactive oxygen species (ROS). ROS are free hydroxyl radicals such as â¢OH and O2⢠ions that have high oxidizing capacity. The developed Ag/Cu BMs shown effective bacteriostatic action against many infections.
Assuntos
Vermelho Congo , Nanopartículas Metálicas , Animais , Cobre/química , Plumas , Espécies Reativas de Oxigênio , Vestuário , Nanopartículas Metálicas/químicaRESUMO
The high electrons and holes recombination rate of ZnIn2S4 significantly limits its photocatalytic performance. Herein, a simple in situ photodeposition strategy is adopted to introduce the cocatalyst cobalt phosphate (Co-Pi) on ZnIn2S4, aiming at facilitating the separation of electron-hole by promoting the transfer of photogenerated holes of ZnIn2S4. The study reveals that the composite catalyst has superior photocatalytic performance than blank ZnIn2S4. In particular, ZnIn2S4 loaded with 5% Co-Pi (ZnIn2S4/5%Co-Pi) has the best photocatalytic activity, and the H2 production rate reaches 3593 µmol·g-1·h-1, approximately double that of ZnIn2S4 alone. Subsequent characterization data demonstrate that the introduction of the cocatalyst Co-Pi facilitates the transfer of ZnIn2S4 holes, thus improving the efficiency of photogenerated carrier separation. This investigation focuses on the rational utilization of high-content and rich cocatalysts on earth to design low-cost and efficient composite catalysts to achieve sustainable photocatalytic hydrogen evolution.
RESUMO
CdS quantum dots (CdS QDs) are regarded as a promising photocatalyst due to their remarkable response to visible light and suitable placement of conduction bands and valence bands. However, the problem of photocorrosion severely restricts their application. Herein, the CdS QDs-Co9S8 hollow nanotube composite photocatalyst has been successfully prepared by loading Co9S8 nanotubes onto CdS QDs through an electrostatic self-assembly method. The experimental results show that the introduction of Co9S8 cocatalyst can form a stable structure with CdS QDs, and can effectively avoid the photocorrosion of CdS QDs. Compared with blank CdS QDs, the CdS QDs-Co9S8 composite exhibits obviously better photocatalytic hydrogen evolution performance. In particular, CdS QDs loaded with 30% Co9S8 (CdS QDs-30%Co9S8) demonstrate the best photocatalytic performance, and the H2 production rate reaches 9642.7 µmol·g-1·h-1, which is 60.3 times that of the blank CdS QDs. A series of characterizations confirm that the growth of CdS QDs on Co9S8 nanotubes effectively facilitates the separation and migration of photogenerated carriers, thereby improving the photocatalytic hydrogen production properties of the composite. We expect that this work will facilitate the rational design of CdS-based photocatalysts, thereby enabling the development of more low-cost, high-efficiency and high-stability composites for photocatalysis.
RESUMO
Metal halide perovskites (MHPs) have emerged as attractive candidates for producing green hydrogen via photocatalytic pathway. However, the presence of abundant defects and absence of efficient hydrogen evolution reaction (HER) active sites on MHPs seriously limit the solar-to-chemical (STC) conversion efficiency. Herein, to address this issue, we present a bi-functionalization strategy through decorating MHPs with a molecular molybdenum-sulfur-containing co-catalyst precursor. By virtue of the strong chemical interaction between lead and sulfur and the good dispersion of the molecular co-catalyst precursor in the deposition solution, a uniform and intimate decoration of the MHPs surface with lead sulfide (PbS) and amorphous molybdenum sulfide (MoSx) co-catalysts is obtained simultaneously. We show that the PbS co-catalyst can effectively passivate the Pb-related defects on the MHPs surface, thus retarding the charge recombination and promoting the charge transfer efficiency significantly. The amorphous MoSx co-catalyst further promotes the extraction of photogenerated electrons from MHPs and facilitates the HER catalysis. Consequently, drastically enhanced photocatalytic HER activities are obtained on representative MHPs through the synergistic functionalization of PbS and MoSx co-catalysts. A solar-to-chemical (STC) conversion efficiency of ca. 4.63% is achieved on the bi-functionalized FAPbBr3-xIx, which is among the highest values reported for MHPs.
RESUMO
Narrow-bandgap semiconductors are promising photocatalysts facing the challenges of low photoredox potentials and high carrier recombination. Here, a broken-gap heterojunction Bi/Bi2 S3 /Bi/MnO2 /MnOx , composed of narrow-bandgap semiconductors, is selectively decorated by Bi, MnOx nanodots (NDs) to achieve robust photoredox ability. The Bi NDs insertion at the Bi2 S3 /MnO2 interface induces a vertical carrier migration to realize sufficient photoredox potentials to produce O2 â¢- and ⢠OH active species. The surface decoration of Bi2 S3 /Bi/MnO2 by Bi and MnOx cocatalysts drives electrons and holes in opposite directions for optimal photogenerated charge separation. The selective cocatalysts decoration realizes synergistic surface and bulk phase carrier separation. Density functional theory (DFT) calculation suggests that Bi and MnOx NDs act as active sites enhancing the absorption and reactants activation. The decorated broken-gap heterojunction demonstrates excellent performance for full-light driving organic pollution degradation with great commercial application potential.
RESUMO
To simultaneously improve the hole extraction ability of the BiVO4 photoanode and accelerate the surface reaction kinetics, herein, a carbon nanolayer conformally coated Fe2 O3 (C-Fe2 O3 ) as oxygen evolution catalyst (OEC) is loaded on the H2 plasma treated nanoporous BiVO4 (BVO(H2 )) surface by a hydrothermal reaction. It is found that the H2 plasma induced vacancies in BVO remarkably increases the conductivity, and the C-Fe2 O3 enables hole extraction from the bulk to the surface as well as efficient hole injection to the electrolyte. As a result, the C-Fe2 O3 /BVO(H2 ) photoanode achieves a photocurrent density of 4.4â mA/cm2 at 1.23â V vs. reversible hydrogen electrode (RHE) and an ABPE value of 1.5 % at 0.68â V vs. RHE, which are 4.8-fold and 13-fold higher than that of BVO photoanode, respectively.
RESUMO
Promoting charge separation, constructing active sites, and improving the utilization of metal atoms are very important for the design of efficient photocatalysts. A simultaneous loading of Ni2 P cocatalysts on the inner and outer surfaces of mesoporous P-doped carbon nitride hollow nanospheres (PCNHS) to construct a Ni2 P@PCNHS@Ni2 P photocatalyst is reported. Ni2 P cocatalysts loading provides enough active sites on both the inner and outer surfaces for proton reduction, and the formed heterojunctions simultaneously promote the migration and separation of the photogenerated charges on the inner and outer surfaces. The photocatalytic reaction proceeds simultaneously on the inner and outer surfaces of Ni2 P@PCNHS@Ni2 P, which leads to a significantly improved photocatalytic water splitting performance and enhanced atomic utilization. Notably, the hydrogen evolution rate of Ni2 P@PCNHS@Ni2 P is 2.4 times higher than that of Pt-loaded PCNHS. The findings guide the design of hollow nanostructured composites with high-boosting photocatalytic performance.
RESUMO
We report the formation of Mo1-xWxO3-CdS (0 ≤ x ≤1) nanophotocatalysts by a combination of solid-state and solution-impregnation processes. The formation of 2D+1D heterostructured composite was revealed by electron microscopy and the structure of ternary co-catalyst and photocatalysts were confirmed by spectroscopic analyses. The H2evolution activity of the nanocomposites was assessed via photocatalytic splitting of water under the irradiation of visible light. All the nanocomposites studied here exhibit notable catalytic activity and good photostability using lactic acid as the sacrificial electron donor compared to a pristine compound. Among these nanocomposites, WO3-CdS shows superior activity with H2evolution rates of 15.19 mmolg-1h-1, 28 times higher than the pure CdS. The WO3-CdS photoactivity is not only superior among all the composites studied here but also highest among the reported WO3composite catalysts to date. The novel construction of the oxide-based nanocomposite photocatalyst shown here efficiently enhances the catalytic activity by effective separation of charge carriers and inhibits photocorrosion of CdS nanorods. The apparent quantum yield of the hydrogen evolution for WO3-CdS was found to be 8% in the visible spectral range. The disparity of the catalytic ability between MoO3and WO3and the variance among the compositions was unraveled through optical band-offset alignment with respect to CdS. Though the 2D+1D novel fabrication is common to all the composites, the difference in the type of band alignment MoO3(type-I) and WO3(type-II) with CdS plays a highly significant role in the co-catalytic activity.
RESUMO
In the present work, functional diamine groups into indium frameworks to synthesize cyclic carbonates from CO2 and epoxides with efficient catalytic activity in the absence of co-catalyst and solvent are reported for the first time. Crystalline porous materials (CPM)-5 modified with 1,2-phenylene diamine and ethylene diamine (CPM-5-PhDA and CPM-5-EDA), were prepared using a post-synthetic modification (PSM) method. The properties of the modified CPM-5 were characterized by powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), N2-adsorption, scanning electron microscopy (SEM), CO2 adsorption, and temperature programmed desorption TPD methods. The presence of diamine groups as basic sites and indium Lewis acid sites in the framework structure were desirable for high catalytic activity. For a given catalyst weight, CPM-5-PhDA was the best candidate to appear with great catalytic activity and selectivity for the cycloaddition reaction at 100°C and 1 MPa CO2 under co-catalyst and solvent free conditions. CPM-5-PhDA also was found to afford large and bulky epoxides. The catalyst can be easily separated and reused five times without any decline in activity.
Assuntos
Dióxido de Carbono , Índio , Solventes , Dióxido de Carbono/química , Diaminas , Porosidade , Espectroscopia de Infravermelho com Transformada de Fourier , Compostos de Epóxi/químicaRESUMO
Photocatalytic water splitting is a simple means of converting solar energy into storable hydrogen energy. Narrow-band gap oxysulfide photocatalysts have attracted much attention in this regard owing to the significant visible-light absorption and relatively high stability of these compounds. However, existing materials suffer from low efficiencies due to difficulties in synthesizing these oxysulfides with suitable degrees of crystallinity and particle sizes, and in constructing effective reaction sites. The present work demonstrates the production of a Gd2 Ti2 O5 S2 (λ<650â nm) photocatalyst capable of efficiently driving photocatalytic reactions. Single-crystalline, plate-like Gd2 Ti2 O5 S2 particles with atomically ordered surfaces were synthesized by flux and chemical etching methods. Ultrafine Pt-IrO2 cocatalyst particles that promoted hydrogen (H2 ) and oxygen (O2 ) evolution reactions were subsequently loaded on the Gd2 Ti2 O5 S2 while ensuring an intimate contact by employing a microwave-heating technique. The optimized Gd2 Ti2 O5 S2 was found to evolve H2 from an aqueous methanol solution with a remarkable apparent quantum efficiency of 30 % at 420â nm. This material was also stable during O2 evolution in the presence of a sacrificial reagent. The results presented herein demonstrates a highly efficient narrow-band gap oxysulfide photocatalyst with potential applications in practical solar hydrogen production.
RESUMO
Sluggish oxygen evolution kinetics are one of the key limitations of bismuth vanadate (BiVO4 ) photoanodes for efficient photoelectrochemical (PEC) water splitting. To address this issue, we report a vanadium oxide (VOx ) with enriched oxygen vacancies conformally grown on BiVO4 photoanodes by a simple photo-assisted electrodeposition process. The optimized BiVO4 /VOx photoanode exhibits a photocurrent density of 6.29â mA cm-2 at 1.23â V versus the reversible hydrogen electrode under AM 1.5â G illumination, which is ca. 385 % as high as that of its pristine counterpart. A high charge-transfer efficiency of 96 % is achieved and stable PEC water splitting is realized, with a photocurrent retention rate of 88.3 % upon 40â h of testing. The excellent PEC performance is attributed to the presence of oxygen vacancies in VOx that forms undercoordinated sites, which strengthen the adsorption of water molecules onto the active sites and promote charge transfer during the oxygen evolution reaction. This work demonstrates the potential of vanadium-based catalysts for PEC water oxidation.
RESUMO
Two-dimensional (2D) transition metal dichalcogenides (TMDs), a rising star in the post-graphene era, are fundamentally and technologically intriguing for photocatalysis. Their extraordinary electronic, optical, and chemical properties endow them as promising materials for effectively harvesting light and catalyzing the redox reaction in photocatalysis. Here, we present a tutorial-style review of the field of 2D TMDs for photocatalysis to educate researchers (especially the new-comers), which begins with a brief introduction of the fundamentals of 2D TMDs and photocatalysis along with the synthesis of this type of material, then look deeply into the merits of 2D TMDs as co-catalysts and active photocatalysts, followed by an overview of the challenges and corresponding strategies of 2D TMDs for photocatalysis, and finally look ahead this topic.
RESUMO
Environmentally sustainable and selective conversion of methane to valuable chemicals under ambient conditions is pivotal for the development of next-generation photocatalytic technology. However, due to the lack of microscopic knowledge about non-thermal methane conversion, controlling and modulating photocatalytic oxidation processes driven by photogenerated holes remain a challenge. Here, we report novel function of metal cocatalysts to accept photogenerated holes and dominate selectivity of methane oxidation, which is clearly beyond the conventional concept in photocatalysis that the metal cocatalysts loaded on the surfaces of semiconductor photocatalysts mostly capture photogenerated electrons and dominate reduction reactions exclusively. The novel photocatalytic role of metal cocatalysts was verified by operando molecular spectroscopy combined with real-time mass spectrometry for metal-loaded Ga2 O3 model photocatalysts under methane and water vapor at ambient temperature and pressure. Our concept of metal cocatalysts that work as active sites for both photocatalytic oxidation and reduction provides a new understanding of photocatalysis and a solid basis for controlling non-thermal redox reactions by metal-cocatalyst engineering.
RESUMO
Solar-driven photocatalytic lignocellulose conversion is a promising strategy for the sustainable production of high-value chemicals, but selectivity control remains a challenging goal in this field. Here, we report efficient and selective conversion of lignocellulose-derived α-hydroxyl acids to tartaric acid derivatives, α-keto acids, and H2 using Pt-modified CdS catalysts. Pt nanoparticles on CdS selectively produce tartaric acid derivatives via C-C coupling, while atomically dispersed Pt on CdS switches product selectivity to the oxidation reaction to produce α-keto acids. The atomically dispersed Pt species stabilized by Pt-S bonds promote the activation of the hydroxyl group and thus switch product selectivity from tartaric acid derivatives to α-keto acids. A broad range of lignocellulose-derived α-hydroxyl acids was applied for preparing the corresponding tartaric acid derivatives and α-keto acids over the two Pt-modified CdS catalysts. This work highlights the unique performance of metal sulfides in coupling reactions and demonstrates a strategy for rationally tuning product selectivity by engineering the interaction between metal sulfide and cocatalyst.