Ecofriendly Catechol Lipid Bioresin for Low-Temperature Processed Electrode Patterns with Strong Durability.

We demonstrated catechol lipid-based bioresin, which is collected from lacquer trees, to produce conductive pastes that can be processed at low temperatures, which are highly adhesive and multidurable. Our conductive paste, which consists of catechol lipid-based urushiol resin and a multimodal mixture of silver fillers, exhibited stable dispersion with shear thinning properties. The urushiol lacquer induced spontaneous reduction of silver salt at the surface of the silver fillers, thereby contributing to lower the contact resistance between conductive fillers in the electrical conduction. Furthermore, the directional volume shrinkage of the urushiol lacquer matrix in a cross-linking reaction resulted in a highly ordered microstructure of the silver fillers with layer-by-layer stacking of the silver flakes. This structure contributed to the improvement of the electrical contact between fillers as well as excellent mechanical hardness, anti-scratch capability, and the long-term environmental stability of the conductive films. Conductive films based on the silver paste with urushiol lacquer exhibited low electrical resistivity below 4.4 × 10-5 Ω cm, 5B-class strong adhesion strength, and high hardness exceeding 200 MPa. Finally, we demonstrated the facile room-temperature processability and screen printability of the UL-Ag paste by fabricating a printed antenna and three-dimensional (3D) electrode assembly based on a plastic 3D block.

Conducting instant adhesives by grafting of silane polymer onto expanded graphite.

A "grafting to" methodology for the attachment of a silane based polymer (SG) onto functionalized graphitic platelets is demonstrated. The siloxy end groups of the modifier were further cross-linked without addition of any external curative. These sterically stabilized nanoplatelets with a high grafting density ensured complete screening of the attractive interparticle interactions. As a result, a better dispersion of platelets was observed compared to the physically mixed platelets in the polymer matrix (SUG). The larger size of the polymer tethered graphitic particles and the greater extent of heat liberated due to grafting resulted in a higher enthalpic contribution in the case of SG compared to SUG. This makes the formation of SG thermodynamically more favorable compared to SUG. Presence of a hierarchical spatial arrangement with a good dispersion of graphitic platelets was observed within the siloxane matrix in the case of SG compared to SUG. The nanoparticle tethered composite generated exhibited an "instant" conducting adhesive behavior. The adhesive properties of the SG were found to be increased due to grafting of graphitic platelets when compared with the neat polymer. Further, SG exhibited a conductive character whereas the neat polymer and SUG demonstrated an insulating character.