A Triptycene-Based Layered/Flower-Like 2D Conductive Metal-Organic Framework with 3D Extension as an Electrode for Efficient Li Storage.

2D metal-organic frameworks (2D MOFs) with π conjugation have attracted widespread attention in the field of lithium storage due to their unique electron transfer units and structural characteristics. However, the periodic 2D planar extension structure hides some active sites, which is not conducive to the utilization of its structural advantages. In this work, a series of triptycene-based 2D conductive MOFs (M-DBH, M = Ni, Mn, and Co) with 3D extension structures are constructed by coordinating 9,10-dihydro-9,10-[1,2]benzenoanthracene-2,3,6,7,14,15-hexaol with metal ions to explore their potential applications in lithium-ion and lithium-sulfur batteries. This is the first study in which 2D conductive MOFs with the 3D extended molecule are used as electrode materials for lithium storage. The designed material generates rich active sites through staggered stacking layers and shows excellent performance in lithium-ion and lithium-sulfur batteries. The capacity retention rate of Ni-DBH can reach over 70% after 500 cycles at 0.2 C in lithium-ion batteries, while the capacity of S@Mn-DBH exceeds 305 mAh g-1 after 480 cycles at 0.5 C in lithium-sulfur batteries. Compared with the materials with 2D planar extended structures, the M-DBH electrodes with 3D extended structures in this work exhibit better performance in terms of cycle time and lithium storage capacity.

Low-Coordinated Conductive ZnCu Metal-Organic Frameworks for Highly Selective H2O2 Electrosynthesis.

Direct electrosynthesis of hydrogen peroxide (H2O2) with high production rate and high selectivity through the two-electron oxygen reduction reaction (2e-ORR) offers a sustainable alternative to the energy-intensive anthraquinone technology but remains a challenge. Herein, a low-coordinated, 2D conductive Zn/Cu metal-organic framework supported on hollow nanocube structures (ZnCu-MOF (H)) is rationally designed and synthesized. The as-prepared ZnCu-MOF (H) catalyst exhibits substantially boosted electrocatalytic kinetics, enhanced H2O2 selectivity, and ultra-high Faradaic efficiency for 2e-ORR process in both alkaline and neutral conditions. Electrochemical measurements, operando/quasi in situ spectroscopy, and theoretical calculation demonstrate that the introduction of Cu atoms with low-coordinated structures induces the transformation of active sites, resulting in the beneficial electron transfer and the optimized energy barrier, thereby improving the electrocatalytic activity and selectivity.

A Computation-guided Design of Highly Defined and Dense Bimetallic Active Sites on a Two-dimensional Conductive Metal-organic Framework for Efficient H2O2 Electrosynthesis.

Electrochemical synthesis of hydrogen peroxide (H2O2) via the two-electron oxygen reduction reaction (2e--ORR) provides an alternative method to the energy-intensive anthraquinone method. Metal macrocycles with precise coordination are widely used for 2e--ORR electrocatalysis, but they have to be commonly loaded on conductive substrates, thus exposing a large number of 2e--ORR-inactive sites that result in poor H2O2 production rate and efficiency. Herein, guided by first-principle predictions, a substrate-free and two-dimensional conductive metal-organic framework (Ni-TCPP(Co)), composed of Co-N4 sites in porphine(Co) centers and Ni2O8 nodes, is designed as a multi-site catalyst for H2O2 electrosynthesis. The approperiate distance between the CoN4 and Ni2O8 sites in Ni-TCPP(Co) weakens the electron transfer between them, thus ensuring their inherent activities and creating high-density active sites. Meanwhile, the intrinsic electronic conductivity and porosity of Ni-TCPP(Co) further facilitate rapid reaction kinetics. Therefore, outstanding 2e--ORR electrocatalytic performance has been achieved in both alkaline and neutral electrolytes (>90%/85% H2O2 selectivity within 0-0.8 V vs. RHE and >18.2/18.0 mol g-1 h-1 H2O2 yield under alkaline/neutral conditions), with confirmed feasibility for water purification and disinfection applications. This strategy thus provides a new avenue for designing catalysts with precise coordination and high-density active sites, promoting high-efficiency electrosynthesis of H2O2 and beyond.

Synthesis of Conductive MOFs and Their Electrochemical Application.

Conductive metal-organic frameworks (MOFs) are a type of porous material. It consists of metal ions coordinated with highly conjugated organic ligands. The high density of carriers and orbital overlap contribute to the amazing conductivity. Additionally, conductive MOFs inherit the advantages of large specific surface area, structural diversity, and adjustable pore size from MOFs. These excellent properties have attracted many researchers to explore controllable synthesis and electrochemical applications over the past decade. This work provides an overview of the recent advances in the synthesis strategies of conductive MOFs and highlights their applications in electrocatalysis, supercapacitors, sensors, and batteries. Finally, the challenges faced by the synthesis and application of conductive MOFs are discussed, as well as the views on promising solutions for them are presented.

Electrocatalytic Microdevice Array Based on Wafer-Scale Conductive Metal-Organic Framework Thin Film for Massive Hydrogen Production.

The synthesis of large-scale 2D conductive metal-organic framework films with tunable thickness is highly desirable but challenging. In this study, an Interface Confinement Self-Assembly Pulling (ICSP) method for in situ synthesis of 4-in. Ni-BHT film on the substrate surface is developed. By modulating the thickness of the confined space, the thickness of Ni-BHT films could be easily varied from 4 to 42 nm. To eliminate interference factors and evaluate the effect of film thickness on the catalytic performance of HER, an electrocatalytic microdevice based on the Ni-BHT film is designed. The effective catalytic thickness of the Ni-BHT film is found to be around 32 nm. Finally, to prepare the electrocatalytic microdevice array, over 100 000 microdevices on a 4-in. Ni-BHT film are integrated. The results show that the microdevice array has good stability and a high hydrogen production rate and could be used to produce large amounts of hydrogen. The wafer-scale 2D conductive metal-organic framework's fabrication greatly advances the practical application of microdevices for massive hydrogen production.

A Robust n-n Heterojunction: CuN and BN Boosting for Ambient Electrocatalytic Nitrogen Reduction to Ammonia.

An n-n type heterojunction comprising with CuN and BN dual active sites is synthesized via in situ growth of a conductive metal-organic framework (MOF) [Cu3 (HITP)2 ] (HITP = 2,3,6,7,10,11-hexaiminotriphenylene) on hexagonal boron nitride (h-BN) nanosheets (hereafter denoted as Cu3 (HITP)2 @h-BN) for the electrocatalytic nitrogen reduction reaction (eNRR). The optimized Cu3 (HITP)2 @h-BN shows the outstanding eNRR performance with the NH3 production of 146.2 µg h-1 mgcat -1 and the Faraday efficiency of 42.5% due to high porosity, abundant oxygen vacancies, and CuN/BN dual active sites. The construction of the n-n heterojunction efficiently modulates the state density of active metal sites toward the Fermi level, facilitating the charge transfer at the interface between the catalyst and reactant intermediates. Additionally, the pathway of NH3 production catalyzed by the Cu3 (HITP)2 @h-BN heterojunction is illustrated by in situ FT-IR spectroscopy and density functional theory calculation. This work presents an alternative approach to design advanced electrocatalysts based on conductive MOFs.

Recent Progress of Advanced Conductive Metal-Organic Frameworks: Precise Synthesis, Electrochemical Energy Storage Applications, and Future Challenges.

Metal-organic frameworks (MOFs) with diverse composition, tunable structure, and unique physicochemical properties have emerged as promising materials in various fields. The tunable pore structure, abundant active sites, and ultrahigh specific surface area can facilitate mass transport and provide outstanding capacity, making MOFs an ideal active material for electrochemical energy storage and conversion. However, the poor electrical conductivity of pristine MOFs severely limits their applications in electrochemistry. Developing conductive MOFs has proved to be an effective solution to this problem. This review focuses on the design and synthesis of conductive MOF composites with judiciously chosen conducting materials, pristine MOFs, and assembly methods, as well as the preparation of intrinsically conductive MOFs based on building 2D π-conjugated structures, introducing mixed-valence metal ions/redox-active ligands, designing π-π stacked pathways, and constructing infinite metal-sulfur chains (-M-S-)∞ . Furthermore, recent progress and challenges of conductive MOFs for energy storage and conversion (supercapacitors, Li-ion batteries, Li-S batteries, and electrochemical water splitting) are summarized.

Conductive Two-Dimensional Phthalocyanine-based Metal-Organic Framework Nanosheets for Efficient Electroreduction of CO2.

The electrocatalytic conversion of CO2 into value-added chemicals is a promising approach to realize a carbon-energy balance. However, low current density still limits the application of the CO2 electroreduction reaction (CO2 RR). Metal-organic frameworks (MOFs) are one class of promising alternatives for the CO2 RR due to their periodically arranged isolated metal active sites. However, the poor conductivity of traditional MOFs usually results in a low current density in CO2 RR. We have prepared conductive two-dimensional (2D) phthalocyanine-based MOF (NiPc-NiO4 ) nanosheets linked by nickel-catecholate, which can be employed as highly efficient electrocatalysts for the CO2 RR to CO. The obtained NiPc-NiO4 has a good conductivity and exhibited a very high selectivity of 98.4 % toward CO production and a large CO partial current density of 34.5 mA cm-2 , outperforming the reported MOF catalysts. This work highlights the potential of conductive crystalline frameworks in electrocatalysis.

Highly Selective CO2 Electroreduction to CH4 by In†Situ Generated Cu2 O Single-Type Sites on a Conductive MOF: Stabilizing Key Intermediates with Hydrogen Bonding.

It is still a great challenge to achieve high selectivity of CH4 in CO2 electroreduction reactions (CO2 RR) because of the similar reduction potentials of possible products and the sluggish kinetics for CO2 activation. Stabilizing key reaction intermediates by single type of active sites supported on porous conductive material is crucial to achieve high selectivity for single product such as CH4 . Here, Cu2 O(111) quantum dots with an average size of 3.5 nm are in situ synthesized on a porous conductive copper-based metal-organic framework (CuHHTP), exhibiting high selectivity of 73 % towards CH4 with partial current density of 10.8 mA cm-2 at -1.4 V vs. RHE (reversible hydrogen electrode) in CO2 RR. Operando infrared spectroscopy and DFT calculations reveal that the key intermediates (such as *CH2 O and *OCH3 ) involved in the pathway of CH4 formation are stabilized by the single active Cu2 O(111) and hydrogen bonding, thus generating CH4 instead of CO.

The Realization of Uniform Growth of Conductive MOFs on LDHs and Their High Performance in Supercapacitors.

Metal-organic frameworks (MOFs) have been widely investigated as functional materials with excellent properties. However, most MOFs are of poor electrical conductivity, which hinders their further application in electrochemical fields. Fortunately, the emergence of intrinsically conductive MOFs (c-MOFs) alleviates this problem. Layered double hydroxides (LDHs) possess Faraday redox reactivity, which is favorable to capacitors. In this paper, we combined c-MOFs with LDHs and prepared a series of NiCo-LDH@M-HHTP(-EtOH) (M=Ni or Co; HHTP=2,3,6,7,10,11-hexahydroxytriphenylene) multilayer nanoarrays, and the effects of solvent on the morphology and energy storage properties of the materials were investigated. When NiCo-LDH@Co-HHTP-EtOH is applied as an electrode material in supercapacitors, it exhibits a capacitance of 830 F g-1 at 1 A g-1 . Furthermore, it exhibits high energy density and excellent rate performance when assembled in aqueous asymmetric supercapacitors.

Microfluidic-Assisted 3D Printing Zinc Powder Anode with 2D Conductive MOF/MXene Heterostructures for High-Stable Zinc-Organic Battery.

Zinc powder (Zn-P) anodes have significant advantages in terms of universality and machinability compared with Zn foil anodes. However, their rough surface, which has a high surface area, intensifies the uncontrollable growth of Zn dendrites and parasitic side reactions. In this study, an anti-corrosive Zn-P-based anode with a functional layer formed from a MXene and Cu-THBQ (MXene/Cu-THBQ) heterostructure is successfully fabricated via microfluidic-assisted 3D printing. The unusual anti-corrosive and strong adsorption of Zn ions using the MXene/Cu-THBQ functional layer can effectively homogenize the Zn ion flux and inhibit the hydrogen evolution reaction (HER) during the repeated process of Zn plating/stripping, thus achieving stable Zn cycling. Consequently, a symmetric cell based on Zn-P with the MXene/Cu-THBQ anode exhibits a highly reversible cycling of 1800 h at 2 mA cm-2 /1 mAh cm-2 . Furthermore, a Zn-organic full battery matched with a 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl organic cathode riveted on graphene delivers a high reversible capacity and maintains a long cycle life.

Organic Solvent Boosts Charge Storage and Charging Dynamics of Conductive MOF Supercapacitors.

Conductive metal-organic frameworks (c-MOFs) and ionic liquids (ILs) have emerged as auspicious combinations for high-performance supercapacitors. However, the nanoconfinement from c-MOFs and high viscosity of ILs slow down the charging process. This hindrance can, however, be resolved by adding solvent. Here, constant-potential molecular simulations are performed to scrutinize the solvent impact on charge storage and charging dynamics of MOF-IL-based supercapacitors. Conditions for >100% enhancement in capacity and ≈6 times increase in charging speed are found. These improvements are confirmed by synthesizing near-ideal c-MOFs and developing multiscale models linking molecular simulations to electrochemical measurements. Fundamentally, the findings elucidate that the solvent acts as an "ionophobic agent" to induce a substantial enhancement in charge storage, and as an "ion traffic police" to eliminate convoluted counterion and co-ion motion paths and create two distinct ion transport highways to accelerate charging dynamics. This work paves the way for the optimal design of MOF supercapacitors.

In-situ stabilization of metal-nitride sites in sprouted 2D cMOF@LDHs hetero-nano petals on metaloxynitrides nanostems for enhanced water splitting.

Addressing the challenges of enhancing water-splitting efficiency necessitates the exploration and rational design of high-performance and durable electrocatalysts with appealing nanoarchitectures. In this study, we present the design and fabrication of conjugated cMOF/LDH hetero-nano petals decorated with monodispersed Metal-N sites, which are uniformly shelled over tungsten oxynitride (WNO) nanowire arrays to form a unique core-shell architecture. For this rational engineering, WNO nanowire arrays were grown on carbon cloth. Then, a thin-layered Ru-Co-Fe layered double hydroxide (RuCoFe/LDH) was deposited around these wires, resulting in a highly porous three-dimensional array of hierarchical hetero RuCoFe-LDHs@WNO-NWs core-shell nanowires (RuCoFe-NSs@WNO-NWs). Subsequently, the linkers coordinated with the RuCoFe-LDH nanosheets and transformed them in-situ into the RuCoFe-cMOF nano petals (RuCoFe-NPs@WNO-NWs). Notably, the linker's amino groups functioned as hooks for precisely anchoring and stabilizing metal sites, forming the metal nitride (M-N) moieties. Interestingly, the designed bi-functional catalyst exhibited superior catalytic activities for both OER (230 mV @ 10 mAcm-2) and HER (49 mV @ 10 mAcm-2) in an alkaline medium. Additionally, an electrolyzer cell employing Ru-CoFe-NPs@WNO-NWs as a bi-functional electrocatalyst required 1.49V to reach a current density of 10 mA cm-2. These remarkable catalytic performances can be attributed to several key factors, including opulent exposed active sites, an efficient charge/mass transport pathway, an optimized electronic structure, and an interfacial synergy effect. Hence, this study provides a new perspective for the design of efficient bi-functional electrocatalysts for use in the energy related electrochemical devices.

In situ fast self-assembled preparation of dandelion-like Cu(OH)2@Cu3(HHTP)2 with core-shell heterostructure arrays for electrochemical sensing of formaldehyde in food samples.

Formaldehyde is known to harm the respiratory, nervous, and digestive systems of people. In this paper, a novel dandelion-like electrocatalyst with core-shell heterostructure arrays were fast self-assembled prepared in situ using copper foam (CF) as support substrate and 2,3,6,7,10,11 hexahydroxy-triphenyl (HHTP) as ligand (Cu(OH)2@Cu3(HHTP)2/CF) by a simple two-step hydrothermal reaction. The 1D Cu(OH)2 nanorods "core" and the 2D π-conjugated conducting metal-organic frameworks (Cu3(HHTP)2cMOF) "shell" with remote delocalized electrons give the dandelion-like heterogeneous catalysts excellent electrochemical activity such as a large specific surface area, high conductivity and a fast electron transfer rate. The Cu(OH)2@Cu3(HHTP)2/CF exhibited excellent electrocatalytic performance for formaldehyde under alkaline conditions with a linear range of 0.2 µmol/L - 125 µmol/L and 125 µmol/L - 8 mmol/L, a detection limit as low as 15.9 nmol/L (S/N = 3), as well as good accuracy, consistency, and durability, and it effectively identified FA in food.

High Crystallinity 2D π-d Conjugated Conductive Metal-Organic Framework for Boosting Polysulfide Conversion in Lithium-Sulfur Batteries.

The catalytic performance of metal-organic frameworks (MOFs) in Li-S batteries is significantly hindered by unsuitable pore size, low conductivity, and large steric contact hindrance between the catalytic site and lithium polysulfide (LPSs). Herein, the smallest π-conjugated hexaaminobenzene (HAB) as linker and Ni(II) ions as skeletal node are in situ assembled into high crystallinity Ni-HAB 2D conductive MOFs with dense Ni-N4 units via dsp2 hybridization on the surface of carbon nanotube (CNT), fabricating Ni-HAB@CNT as separator modified layer in Li-S batteries. As-obtained unique π-d conjugated Ni-HAB nanostructure features ordered micropores with suitable pore size (≈8 Å) induced by HAB ligands, which can cooperate with dense Ni-N4 chemisorption sites to effectively suppress the shuttle effect. Meanwhile, the conversion kinetics of LPSs is significantly accelerated owing to the small steric contact hindrance and increased delocalized electron density endued by the planar tetracoordinate structure. Consequently, the Li-S battery with Ni-HAB@CNT modified separator achieves an areal capacity of 6.29 mAh cm-2 at high sulfur loading of 6.5 mg cm-2 under electrolyte/sulfur ratio of 5 µL mg-1 . Moreover, Li-S single-electrode pouch cells with modified separators deliver a high reversible capacity of 791 mAh g-1 after 50 cycles at 0.1 C with electrolyte/sulfur ratio of 6 µL mg-1 .

Framework Dimensional Control Boosting Charge Storage in Conjugated Coordination Polymers.

Conjugated coordination polymers (CCPs) with extended π-d conjugation, which can effectively promote long-range delocalization of electrons and enhance conductivity, are superior to traditional metal-organic frameworks (MOFs) and attracted great attention for potential applications in chemical sensors, electronics, energy conversion/storage devices, etc. However, the precise construction of CCPs is still challenging due to the complex and uncontrollable reactions of CCPs. Herein, two different framework dimensions of CCPs are controllably realized by employing the same ligand (2,3,5,6-tetraaminobenzoquinone (TABQ)) and the same metal (copper) as center ions. The manipulation of reaction leads to different valences of ligands and metal ions, different coordination geometries, and thereby 1D-CuTABQ and 2D-CuTABQ frameworks, respectively. High performance of charge storage is hence achieved involving the storage of both cations and anions, and therein, 2D-CuTABQ shows a high reversible capacity of ≈305 mAh g-1 , good rate capability and high capacity retention (≈170 mAh g-1 after 2000 cycles at 5 A g-1 with 0.01% decay per cycle), which outperforms 1D-CuTABQ and almost all of the reported MOFs as cathodes for batteries. These results highlight the delicate structural control of CCPs for high-performance batteries and other various applications.

Large-Area Synthesis of Ultrathin, Flexible, and Transparent Conductive Metal-Organic Framework Thin Films via a Microfluidic-Based Solution Shearing Process.

Iminosemiquinone-linker-based conductive metal-organic frameworks (c-MOFs) have attracted much attention as next-generation electronic materials due to their high electrical conductivity combined with high porosity. However, the utility of such c-MOFs in high-performance devices has been limited to date by the lack of high-quality MOF thin-film processing. Herein, a technique known as the microfluidic-assisted solution shearing combined with post-synthetic rapid crystallization (MASS-PRC) process is introduced to generate a high-quality, flexible, and transparent thin-film of Ni3 (hexaiminotriphenylene)2 (Ni3 (HITP)2 ) uniformly over a large-area in a high-throughput manner with thickness controllability down to tens of nanometers. The MASS-PRC process utilizes: 1) a micromixer-embedded blade to simultaneously mix and continuously supply the metal-ligand solution toward the drying front during solution shearing to generate an amorphous thin-film, followed by: 2) immersion in amine solution for rapid directional crystal growth. The as-synthesized c-MOF film has transparency of up to 88.8% and conductivity as high as 37.1 S cm-1 . The high uniformity in conductivity is confirmed over a 3500 mm2 area with an arithmetic mean roughness (Ra ) of 4.78 nm. The flexible thin-film demonstrates the highest level of transparency for Ni3 (HITP)2 and the highest hydrogen sulfide (H2 S) sensing performance (2,085% at 5 ppm) among c-MOFs-based H2 S sensors, enabling wearable gas-sensing applications.

Electrochemical Sensor Based on Glassy-Carbon Electrode Modified with Dual-Ligand EC-MOFs Supported on rGO for BPA.

The electronic conductive metal-organic frameworks (EC-MOFs) based on a single ligand are not suitable for the accurate detection of bisphenol A (BPA) due to the limitations of their electron-transfer-based sensing mechanism. To overcome this drawback, we developed EC-MOFs with novel dual-ligands, 2,3,6,7,10,11-hexahydroxy-sanya-phenyl (HHTP) and tetrahydroxy 1,4-quinone (THQ), and metal ions. A new class of 2D π-conjugation-based EC-MOFs (M-(HHTP)(THQ)) was synthesized by a self-assemble technique. Its best member (Cu-(HHTP)(THQ)) was selected and combined with reduced graphene (rGO) to form a Cu-(HHTP)(THQ)@rGO composite, which was thoroughly characterized by X-ray diffraction, field scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Cu-(HHTP)(THQ)@rGO was drop-cast onto a glassy carbon electrode (GCE) to obtain a sensor for BPA detection. Cyclic voltammetry and electrochemical impedance tests were used to evaluate the electrode performance. The oxidation current of BPA on the Cu-(HHTP)(THQ)@rGO/GCE was substantially higher than on unmodified GCE, which could be explained by a synergy between Cu-(HHTP)(THQ) (which provided sensing and adsorption) and rGO (which provided fast electron conductivity and high surface area). Cu-(HHTP)(THQ)@rGO/GCE exhibited a linear detection range for 0.05-100 µmol·L-1 of BPA with 3.6 nmol·L-1 (S/N = 3) detection limit. We believe that our novel electrode and BPA sensing method extends the application perspectives of EC-MOFs in the electrocatalysis and sensing fields.

Conductive Metal-Organic Frameworks for Supercapacitors.

As a class of porous materials with crystal lattices, metal-organic frameworks (MOFs), featuring outstanding specific surface area, tunable functionality, and versatile structures, have attracted huge attention in the past two decades. Since the first conductive MOF is successfully synthesized in 2009, considerable progress has been achieved for the development of conductive MOFs, allowing their use in diverse applications for electrochemical energy storage. Among those applications, supercapacitors have received great interest because of their high power density, fast charging ability, and excellent cycling stability. Here, the efforts hitherto devoted to the synthesis and design of conductive MOFs and their auspicious capacitive performance are summarized. Using conductive MOFs as a unique platform medium, the electronic and molecular aspects of the energy storage mechanism in supercapacitors with MOF electrodes are discussed, highlighting the advantages and limitations to inspire new ideas for the development of conductive MOFs for supercapacitors.

Competitive Coordination-Oriented Monodispersed Ruthenium Sites in Conductive MOF/LDH Hetero-Nanotree Catalysts for Efficient Overall Water Splitting in Alkaline Media.

Rational exploration of efficient, inexpensive, and robust electrocatalysts is critical for the efficient water splitting. Conjugated conductive metal-organic frameworks (cMOFs) with multicomponent layered double hydroxides (LDHs) to construct bifunctional heterostructure catalysts are considered as an efficient but complicated strategy. Here, the fabrication of a cMOF/LDH hetero-nanotree array catalyst (CoNiRu-NT) coupled with monodispersed ruthenium (Ru) sites via a controllable grafted-growth strategy is reported. Rich-amino hexaiminotriphenylene linkers coordinate with the LDH nanotrunk to form cMOF nanobranches, providing numerous anchoring sites to precisely confine and stabilize RuN4 sites. Moreover, monodispersed and reduced Ru moieties facilitate H2 O adsorption and dissociation, and the heterointerface between the cMOF and the LDH further modifies the chemical and electronic structures. Optimized CoNiRu-NT displays a significant increase in electrochemical water-splitting properties in alkaline media, affording low overpotentials of 22 mV at 10 mA cm-2 and 255 mV at 20 mA cm-2 for the hydrogen evolution reaction and oxygen evolution reaction, respectively. In an actual electrochemical system, CoNiRu-NT drives an overall water splitting at a low cell voltage of 1.47 V to reach 10 mA cm-2 . This performance is comparable to that of pure noble-metal-based materials and superior to most reported MOF-based catalysts.