Occupation-specific risk estimates for suicide and non-fatal self-harm from a Swedish cohort of male construction workers followed 1987-2018.

OBJECTIVES: While suicidal behaviour has become less prevalent in non-manual workers in recent decades, rates have increased in manual workers. We aimed to identify occupations within the construction industry with excess risk of suicide and non-fatal self-harm. METHODS: This cohort of Swedish construction workers comprises 389 132 individuals examined 1971-1993 and followed 1987-2018 using national hospital and cause of death registers. More than 200 job titles were merged into 22 occupational groups. For 296 891 men alive in 1987 and active in the construction sector, survival was calculated from baseline to first event of non-fatal self-harm or suicide and censored for emigration, long-term unemployment, disability pension, retirement, death from other causes or end of follow-up. HRs with 95% CIs were obtained from multiple Cox proportional hazard regression. RESULTS: Overall, 1618 cases of suicide and 4774 events of non-fatal self-harm were registered. Self-harm before baseline was the single largest risk factor for suicide, HR 9.3 (95% CI 7.5 to 11.6). Compared with the overall mean, labourers and rock workers had excess risk for suicide, HR 1.4 (95% CI 1.1 to 1.7) and 1.5 (95% CI 1.0 to 2.3), respectively, while electricians, clerks and foremen had reduced risk. Labourers, concrete workers, sheet metal workers, painters, glaziers and the group 'other construction workers' were at increased risk for non-fatal self-harm. Almost all categories of manual workers were at increased risk for suicidal behaviour relative to clerks and foremen. CONCLUSIONS: Specific occupations within the construction sector were associated with excess risk for suicidal behaviour. Future studies should identify underlying risk factors to inform tailored interventions.

Legionnaires' disease in transportation, construction and other occupations in 39 US jurisdictions, 2014-2016.

BACKGROUND: Certain workers are at increased risk for acquiring Legionnaires' disease compared with other workers. This study aims to identify occupations at increased risk for acquiring Legionnaires' disease. METHODS: Using data from the US Centers for Disease Control and Prevention's Supplemental Legionnaires' Disease Surveillance System, this study identified Legionnaires' disease confirmed patients ≥16 years of age in 39 states with reported symptom onset during 2014-2016. Age-adjusted and sex-adjusted incidence rate ratios (IRR) stratified by occupation group were calculated by comparing Legionnaires' disease patients in an occupation group (eg, transportation) to those in all other occupation groups (eg, non-transportation). RESULTS: A total of 2553 patients had a known occupation group. The two occupations with the highest burden were transportation (N=287; IRR=2.11) and construction (N=269; IRR=1.82). Truck drivers comprised the majority (69.7%) of the transportation occupation group and construction labourers comprised almost half (49%) of the construction occupation group. The healthcare support occupation had the highest IRR (N=75; IRR=2.16). CONCLUSION: Transportation and construction workers, who are generally not covered by guidance related to building water systems, have increased risk of Legionnaires' disease compared with other workers. One hypothesised risk factor for truck drivers is the use of non-genuine windshield cleaner in their vehicles. A simple intervention is to use genuine windshield cleaner with bactericidal properties (ie, includes isopropanol/methanol) which can reduce the risk of Legionella growth and transmission. To improve surveillance of Legionnaires' disease and identification of similar exposures, the authors encourage the collection of occupation and industry information for all patients with Legionnaires' disease.

Prevalence and associated risk factors for suicidal ideation, non-suicidal self-injury and suicide attempt among male construction workers in Ireland.

BACKGROUND: Suicide among male construction workers are reported to be disproportionally high compared to the working age population. However, there is minimal understanding of the prevalence and associated factors for suicidal ideation, non-suicidal self-injury, and suicide attempt among this occupational group globally. METHODS: A cross-sectional study was conducted on a large sample of male construction workers in Ireland (n = 1,585). We investigated the prevalence of suicidal ideation, non-suicidal self-injury and suicide attempts and sociodemographic, occupational, and mental health factors associated with these three outcomes. Multivariable Poisson regression was performed to estimate the prevalence rate ratio of suicidal ideation (model 1 primary outcome), while multivariable logistic regression was used to estimate the odds ratio of non-suicidal self-injury (model 2 primary outcome), and suicide attempt (model 3 primary outcome). RESULTS: The lifetime prevalence rate for suicidal ideation was 22%, 6% for non-suicidal self-injury, and 6% for suicide attempt. In univariate modelling, socio-demographic and occupation-specific factors associated with the three outcomes included younger age (suicidal ideation and non-suicidal self-injury), not being in a relationship (suicide attempt) and working 35-44 h per week (suicidal ideation and suicide attempt). The mental health factors generalized anxiety disorder, depression, and suicide bereavement were significantly associated with increased risk of the three outcomes. In fully adjusted multivariable models, increasing severity of generalized anxiety disorder and depression were associated with an increased prevalence rate ratio of suicidal ideation, and a higher odds ratio of non-suicidal self-injury and suicide attempt. CONCLUSION: Suicidal ideation, non-suicidal self-injury and suicide attempt are significant issues for male construction workers that require specific attention. Findings highlight a need to support younger male construction workers and those bereaved by suicide. They also highlight the need for the early detection and treatment of generalized anxiety disorder and depression in order to intervene in, and potentially prevent, suicidality among male construction workers.

Precursors of falls from height in two main contractor companies in the Chilean construction sector and their subcontractors: Shared vision and preventive prioritization.

BACKGROUND: Risk factors that can result in serious injuries or deaths are frequently not understood or prevented because of the traditional way in which organizations approach safety. This is especially true for falls from heights in the construction sector, which remain a leading safety hazard in construction globally. METHODS: A theoretical framework derived from a thorough review of international evidence provided the foundation for the conduct of 50 structured focus groups with a total of 209 participants representing construction workers and supervisors in two main Chilean construction contractor companies and their subcontractors. RESULTS: A total of 627 precursors (risk factors), 56 taxonomies (work tasks/activities), and 622 defenses (prevention actions) were identified. These were classified in three macro dimensions and 13 subdimensions in total, providing a comprehensive framework for the origin, manifestation, and neutralization of such precursors. DISCUSSION: The findings provide a useful framework for understanding of the most critical risks to which workers are exposed and actions to prevent them. This framework should form the basis for the development of practical safety programs and tools such as management and training checklists, and data analysis for early warning signs.

Suicides among construction workers in the United States, 2021.

BACKGROUND: Construction workers have the second highest suicide death rate; despite this, there is limited literature examining suicides in the industry, which is necessary to identify those at higher risk of death by suicide. The objective of this study was to examine the characteristics of those who died by suicide in construction to address this knowledge gap. METHODS: Data from the National Center for Health Statistics National Vital Statistics System 2021 public use Mortality Multiple Cause-of-Death file were used to identify deaths by suicide, while denominator data for rates come from the 2021 Current Population Survey. RESULTS: In 2021, construction workers were disproportionately affected by suicide deaths. Almost a fifth (17.9%) of deaths by suicide with a reported industry code were in construction, despite construction workers accounting for only 7.4% of the workforce. Male construction workers accounted for a majority (97.8%) of suicide deaths. The highest percent of deaths by suicide were among individuals who were white, non-Hispanic, completed high school or equivalent, and single, across construction and all industries for males and females. DISCUSSION AND CONCLUSIONS: Male and female construction workers had the highest rates of suicide across all characteristics when compared to all industries. Our findings support the need for ongoing prevention efforts within the industry. Future research is needed to understand suicide risk among certain characteristics and occupations. In addition, the work environment or other work-related factors should be studied to understand how the unique nature of the construction industry may be associated with higher suicide rates.

Supporting companies dealing with asbestos risk: Practical tools for occupational health services, risk prevention specialists, and companies.

Although asbestos has been officially banned in France for over two decades, it remains a major public health and occupational health issue. In 2012, French asbestos regulations became considerably more stringent and complex. Consequently, French Public Works and Building Trades Prevention Organisation (OPPBTP) and occupational health services have been working together for several years to support construction professionals. This support involves information, training and advice. This article presents the range of tools developed by OPPBTP and occupational health services to better understand the asbestos risk as it affects construction companies. These tools and this partnership have demonstrated positive results in confronting risk and in the implementation of suitable means of prevention. They serve the best interests of employees, companies and clients, by combining safeguards to employees' health and worksite performance.

Sustainability assessment methods for circular bio-based building materials: A literature review.

Using circular bio-based building materials is considered a promising solution to reduce the environmental impacts of the construction industry. To identify the pros and cons of these materials, it is essential to investigate their sustainability performance. However, the previous sustainability assessment studies are heterogeneous regarding the assessment methods and objectives, highlighting the need for a review to identify and analyse these aspects. Moreover, there is still a lack of studies reviewing the methodological issues and implications of the assessment methods, as well as the current end-of-life scenarios and circularity options for these materials. To address these gaps, this study conducts a systematic and critical review of a sample of 97 articles. The results indicate that Life Cycle Assessment (LCA) is the most frequently applied method, yet most studies are cradle-to-gate analyses of materials. Otherwise, very few studies consider the end-of-life phase, and most of the end-of-life scenarios analysed are unsustainable and have low circularity levels. The analysis also highlights the methodological issues of the assessment methods used, with a particular focus on LCA, such as a lack of consensus on system boundaries, functional units, and databases for facilitating sustainability assessments associated with the use of circular bio-based building materials. Two primary recommendations emerge from the analysis. Firstly, for LCA studies, it is recommended to increase transparency and harmonisation in assessments to improve the comparability of results. Besides, to overcome data availability issues, it is recommended to use data from multiple sources and conduct sensitivity and uncertainty analyses. Secondly, more sustainability assessments (including the three pillars) considering the whole life cycle with more sustainable end-of-life scenarios and circularity options for these materials should be conducted.

Updating a diesel engine exhaust job-exposure matrix with published measurement data.

A job-exposure matrix (JEM) is a tool that can estimate diesel engine exhaust (DEE) exposures. JEMs based on expert judgment or measurement data are limited by the information available at the time of development. Over time, more information about hazardous exposures is understood through additional measurements and peer-reviewed publications. This study presents a systematic approach to updating an existing DEE JEM using published data to better reflect current scientific knowledge. The literature was searched for occupational exposure studies that measured DEE as elemental carbon (EC) between January 2010 and May 2022. Four-digit North American Industry Classification System (NAICS) 2002 and National Occupational Classification-Statistics (NOC-S) 2006 codes were assigned to each identified subgroup within the studies. EC exposures were categorized as low (0-10 µg/m3), moderate (10-20 µg/m3), or high (>20 µg/m3). Weighted arithmetic means were calculated for each industry-occupation intersection (IOI) identified in the literature. These means were used to adjust, or retain, the existing exposure level within the JEM cells using a decision tree based on the number of studies, workplace locations, and pooled sample size of the weighted mean. Concordance was measured between the updated JEM (Diesel Exhaust in Canada JEM (DEC-JEM)), the previous (existing) JEM, and the Canadian Job-Exposure Matrix (CANJEM). Thirty-seven studies were identified from the published literature reporting on 53 unique IOIs (20 NAICS and 34 NOC-S codes), including occupations in the mining, construction, and transportation industries. Exposure levels for 66% of identified IOIs increased, most in construction and mining. After the decision tree's results were expanded to the full DEC-JEM, the exposure level of 486 IOIs (12.5% of DEC-JEM) and 286,710 workers (15.8% of DEE-exposed workers) increased. There was a significant correlation between qualitative exposure levels in the updated DEC-JEM and CANJEM (Kendall's τ = 0.364, p < 0.001). This study describes a systematic approach to updating an existing JEM to incorporate new scientific knowledge. The updated DEC-JEM better reflects existing exposure knowledge in several industries, particularly construction. Future analyses include investigating its use as an exposure assessment tool in disease surveillance.

Work-related head injury and industry sectors in Finland: causes and circumstances.

OBJECTIVE: Despite the continuous development of occupational safety, the prevalence of work-related head injuries is excessive. To promote prevention, we conducted a study evaluating the risks and pathways that precede head injuries in different economic activity sectors. METHODS: In Finland, more than 90% of employees are covered by inclusive statutory workers' compensation. We obtained data on occupational head injuries in 2010-2017 from an insurance company database. The European Statistics on Accidents at Work (ESAW) variables represented the characteristics of the accidents and the injury. We analysed the risk factors, contributing events and injury mechanisms in 20 industry sectors, based on the Statistical Classification of Economic Activities in the European Community (NACE). RESULTS: In the 32,898 cases, the most commonly affected area was the eyes (49.6%). The highest incidence of head injuries was in construction (15.7 per 1000 insurance years). Construction, manufacturing, and human health and social work activities stood out due to their distinctive ESAW category counts. 'Working with hand-held tools' [risk ratio (RR) 2.23, 95% confidence interval (CI) 2.14-2.32] in construction and 'operating machines' (RR 3.32, 95% CI 3.01-3.66) and 'working with hand-held tools' (1.99, 1.91-2.07) in manufacturing predicted head injury. The risk related to parameters of violence and threats in health and social work activities was nearly ninefold the risk of other sectors. CONCLUSION: The risks and pathways preceding head injuries varied considerably. The highest head injury rates were in construction and manufacturing. Violence emerged as a major risk factor in human health and social work activities.

Exploring the low-carbon transition pathway of China's construction industry under carbon-neutral target: A socio-technical system transition theory perspective.

The carbon emissions growth in the construction industry hinders the achievement of global carbon-neutral target, especially in China. Studies suggest that developing low-carbon technologies is an effective means of achieving the low-carbon transition (LCT) in the construction industry. However, these studies ignore the fact that the LCT is a complex and systemic issue that needs to consider the interaction of technical and non-technical factors. Thus, based on the socio-technical system transition theory, this study identified the influencing factors and constructs a dynamics model to simulate the dynamic changes of the LCT in China's construction industry under different scenarios. The results showed that multi-level factors coordinated to drive the LCT of the construction industry. Environmental factors played a weak role and the effectiveness of government intervention decreased with the transition process. On the contrary, technological and market factors were indispensable drivers and especially played a dominant role during the later stages of the transition. Finally, the LCT pathway of China's construction industry was proposed based on the results. These findings expand the boundary of theoretical research on industrial transition and provide a decision-making reference for the advancement of international carbon-neutral work.

A qualitative analysis of self-reported suicide gatekeeper competencies and behaviour within the Australian construction industry.

ISSUE ADDRESSED: Construction workers in Australia have suicide rates 84% higher than other workers, with even higher rates for younger and less-skilled workers. Gatekeeper training (GKT) is a suicide prevention strategy that aims to improve knowledge, attitudes and self-efficacy to identify and assist individuals at risk of suicide. However, the impact of GKT on long-term behaviour and suicide prevention is unclear in the construction industry. METHODS: Researchers conducted 22 semi-structured interviews with trained Bluehats, who provide support to their colleagues in the construction industry experiencing mental health difficulties and suicidal distress. RESULTS: Participants reported high levels of motivation and capability due to lived experience of mental health problems or suicide, training, satisfaction from helping others and feeling valued in their work environment. CONCLUSIONS: The study highlighted the importance of physical and social opportunities for participants to support their colleagues. The findings reinforced the need to integrate GKT within comprehensive industry suicide prevention programs that provide a range of interventions for workers and ongoing support to trainees to translate their skills into behaviour. Future GKT should include behaviour change approaches to identify and target contextual and individual-level factors influencing behaviour. SO WHAT?: Understanding the potential and limitations of GKT within the construction industry offers invaluable insights for health promotion. Integrating GKT with holistic prevention programs could lead to more impactful strategies, potentially reducing the high suicide rates and fostering a healthier work environment in the construction sector.

Unionisation and injury risk in construction: a replication study.

OBJECTIVE: To replicate, in a more recent time period, a previous cross-sectional study to estimate the association between unionisation and the risk of workers' compensation injury claims. METHODS: The sampling frame was workers' compensation company account records in the industrial, commercial and institutional construction sector in the province of Ontario, Canada, 2012-2018. Company unionisation status was determined through linkage with records of unionised contractors. Outcomes were cumulative counts of workers' compensation injury claims, aggregated to company business. Risk ratios were estimated with multivariable negative binomial regression models. Models were also fit separately to lost-time claims stratified by company size. RESULTS: Business unionisation was associated with a lower lost-time claim incidence (crude risk ratio, CRR=0.69, 95% CI 0.65 to 0.74); adjusted risk ratio, ARR=0.75, 95% CI 0.71 to 0.80). In subgroup analyses, the magnitude of the ARR declined as company size decreased and was not statistically significant for the smallest-sized companies of ≤4 full-time equivalent employees. Unionisation was associated (positively) with the incidence of no-lost-time claims in a crude model, but not in an adjusted one (CRR=1.80, 95% CI 1.71 to 1.89; ARR=1.04, 95% CI 0.98 to 1.09). CONCLUSIONS: Company unionisation was associated with a lower risk of lost-time workers' compensation injury claims, corroborating a similar study from an earlier time period. The protective effect of unionisation declined as company size decreased. In contrast to the previous study, a positive relationship between company unionisation and no-lost-time claim incidence was not found, due in part to a methodological refinement.

Exposure-response relationship between hand-arm vibration exposure and vibrotactile thresholds among rock drill operators: a 4-year cohort study.

OBJECTIVES: The risk of developing hand-arm vibration syndrome (HAVS) from occupational hand-arm vibration (HAV) exposure is traditionally determined by the onset of vascular symptoms (white fingers). However, changes in tactile sensibility at the fingertips is a clinical sign of HAVS which in most cases precedes vascular signs. We aimed to assess relationships between occupational HAV exposure and HAVS-related signs including vibration perception thresholds (VPT) and pegboard score on an individual level, using a longitudinal study design with follow-up tests. METHODS: We followed-up 148 workers exposed to different HAV levels for 4 years, with health examinations including VPT tests and pegboard tests carried out at baseline, 2 years and 4 years. VPT testing included seven frequencies, from 8 to 500 Hz. Second and fifth finger on both hands were tested, thus a total of 28 tests on each subject. We investigated associations using linear mixed models and significance level at p≤0.05. RESULTS: There was a significant exposure-response relationship on an individual level between HAV exposure from rock drills and VPT for 16 of 28 test frequencies. The highest rise (worsening) in VPT was found at the 500 Hz test frequency with 1.54 dB increased VPT per 10-fold increase in cumulative exposure. We found no deterioration in pegboard performance associated with HAV exposure among the participants. CONCLUSIONS: Risk predictions of HAVS may be based on exposure-response relationships between HAV exposure and VPT. The 500 Hz test frequency should be included in the VPT test protocols for early detection of signs related to reduced tactile sensibility.

Occupational exposure to particles and biomarkers of cardiovascular disease-during work and after vacation.

OBJECTIVE: Ambient particle matter is a risk factor for cardiovascular disease (CVD). However, little is known about associations between particles in occupational settings and risk of CVD. We investigated associations between occupational dust exposure and biomarkers of CVD, and potential recovery effects after vacation. METHODS: Personal dust exposure measurements (respirable silica, respirable dust < 4 µm, and particles of 0.1-10 µm (PM 0.1-10) were conducted once, and biological sampling were performed twice on non-smoking, male construction workers in Stockholm county, Sweden; during work and immediately after summer vacation. Linear regressions with adjustments for confounders and covariates were performed evaluating associations between occupational dust exposure and biomarkers. Paired t tests were performed evaluating changes before and after vacation. RESULTS: Sixty-five workers participated. Homocysteine concentrations were significantly higher with increasing concentrations (mg/m3) of respirable silica, respirable dust, and PM 0.1-10, and pulse rate with higher levels of respirable dust and dust of PM 0.1-10. Homocysteine levels were also positively correlated to number of years of dust exposure, as were low-density lipoprotein (LDL) levels. A clear recovery effect was present for LDL after vacation, but not for homocysteine. CONCLUSIONS: Occupational dust exposure was associated with some CVD risk markers, even at mean exposure concentrations below the Swedish occupational exposure limits for respirable silica and respirable dust, respectively. Vacation resulted in recovery for some risk markers. However, the change of the homocysteine and LDL levels suggest a long-term effect. Reduction of occupational exposure to dust may decrease the risk of CVD among exposed workers.

Enhancing the MEP Coordination Process with BIM Technology and Management Strategies.

Building Information Modeling (BIM) has been increasingly used in coordinating the different mechanical, electrical, and plumbing (MEP) services in the construction industries. As the construction industries are slowly adapting to BIM, the use of 2D software may become obsolete in the future as MEP services are technically more complicated to coordinate, due to respective services' codes of practice to follow and limit ceiling height. The 3D MEP designs are easy to visualize before installing the respective MEP services on the construction site to prevent delay in the construction process. The aid of current advanced technology has brought BIM to the next level to reduce manual work through automation. Combining both innovative technology and suitable management methods not only improves the workflow in design coordination, but also decreases conflict on the construction site and lowers labor costs. Therefore, this paper tries to explore possible advance technology in BIM and management strategies that could help MEP services to increase productivity, accuracy, and efficiency with a lower cost of finalizing the design of the building. This will assist the contractors to complete construction works before the targeted schedule and meet the client's expectations.

Reinvestigation of the Psychological Mechanisms of Construction Experience on Hazard Recognition Performance.

OBJECTIVE: The study aimed to reinvestigate psychological mechanisms of the influence of construction workers' experience on hazard recognition performance, with signal detection theory (SDT) and electroencephalogram (EEG) readings. BACKGROUND: Existing evidence regarding the effect of experience on hazard recognition performance in the construction industry remains inconsistent. Behavior-wise, identification of dominant hazard recognition factors (sensitivity or response bias, or both) would help determine appropriate training strategies to improve hazard recognition. In terms of neuro-responses, induced gamma-band activity was expected to reflect the cognitive functions mediating the psychological effects of experience. METHOD: Seventy-seven construction workers participated in a predesigned hazard recognition task, in which participants judged whether a hazard was present from a series of construction scenario pictures. We computed and compared the sensitivity and response bias of SDT and time-frequency representations of recorded EEG signals of the two experience-level groups. RESULTS: Novice workers had higher hazard recognition rates. Behavior-wise, novices were more sensitive than more experienced workers. Compared with experienced workers, novices showed stronger gamma-band difference power (hazardous minus safe) in the left frontal and right posterior parietal areas during the hazard recognition process. CONCLUSION: Novices performed better at hazard recognition, indicating their sensitivity to the hazards without a clear difference in response bias. Based on the EEG data, novices' sensitivity may be attributed to more efficient working memory and attentional control. APPLICATION: There is a need for continuous refreshment of hazard recognition skills for experienced workers for safety interventions.

Circular economy in Brazilian construction industry: Current scenario, challenges and opportunities.

The effective implantation of the circular economy (CE) presents a great challenge to the industrial sectors, mostly in those of greater environmental impact, such as construction industry. In Brazil, this industry has been growing over the last 20 years; however, such growth was based on an extractivist economy without any consideration to the end of its products lifespan. Only in 2017, 45 million tonnes of construction and demolition waste were generated in the country. This paper presents the current context of public policies in the Brazilian construction industry and proposes initiatives to introduce principles of CE. An exploratory study was developed, and all the 45 references presented in Appendix A of the review paper of Benachio et al. were considered to draw new ideas. These ideas are related and compared to key points in Brazilian regulations. Twelve opportunities for the improvement are listed and organized by construction stages (planning and design, materials manufacturing, construction processes, use and demolition). The ones related to design and planning using Green building information modelling, and materials manufacturing with recycled waste are highlighted due to the existing actions, standards, and Federal legislation. It was found that some sectors and the government already have actions related to CE (based on the 3R principle), but still there are several initiatives needed for its effective implementation in the Brazilian construction industry.

Gauging the impacts of urbanization on CO2 emissions from the construction industry: Evidence from China.

The construction industry has aided rapid urbanization in China, significantly contributing to CO2 emissions. However, few studies have investigated the impacts of urbanization on CO2 emissions from the construction industry and the regional heterogeneity or considered the construction-related factors for urban construction scale to represent urbanization. To compensate for these limitations, this study aimed to explore the impacts of urbanization on CO2 emissions from the construction industry. Herein, the urban construction scale was used to represent urbanization, along with population size, economic growth, and technology level. An augmented Stochastic Impacts by Regression on Population, Affluence, and Technology model was used to estimate the cross-province panel data from three regions in China during 2008-2017. The heterogeneity due to regional differences in urbanization levels was addressed by classifying China into three regions- urbanized, urbanizing, and under-urbanized. The findings suggest that population size, economic growth, construction of residential buildings, and technology level were the primary factors impacting CO2 emissions, and the impact presented a declining trend from the urbanized to the urbanizing and under-urbanized regions. Specifically, an inverted U-shaped relationship existed between CO2 emissions and urban economic growth, and the urbanized region indicated a higher inflection point than other regions. The urbanization ratio was negatively correlated with CO2 emissions, while the energy intensity, per capita floor space of urban residential buildings, and per capita length of drainpipes were positively correlated with the CO2 emissions in all three regions. Further, the technology level was conducive to CO2 emissions reduction, however, it requires further improvement. The per capita area of paved roads exerted significantly negative effects in the urbanized region and insignificant in the urbanizing and under-urbanized regions. Overall, these results can help formulate policies to mitigate the construction industry's carbon emissions.

Quality assurance in reverse logistics supply chain of demolition waste: A systematic literature review.

The reverse logistics supply chain (RLSC) facilitates the greening of the traditional construction industry supply chain. Despite the growing interest in this approach, limited studies focus on quality assurance (QA) in RLSC, which is crucial to resolve the issue of the low quality in reprocessed products. This study aims to explore the elements which contribute to the QA of RLSC of demolition waste (DW) by conducting a systematic literature review (SLR). A total of 91 articles available in six search engines between 2000 and 2019 were exposed to descriptive and content analysis. The descriptive analysis revealed that most of the articles were experimental studies (35%) and published during the recent period of 2013-2019 (64%). Furthermore, 60% of articles were originated from developed countries while 32% originated from developing countries. The results of the content analysis established that an information-centric integrated system of process, people, policy and technology is needed for QA in RLSC, which is supported by government, regulatory bodies, industry and universities/research institutions. The study addresses the existing gap by proposing a conceptual framework, which could be considered as the foundation in enforcing QA in the RLSC of DW. Finally, the implications for research and practice and some recommendations for further research were presented. The study facilitates in paving the path to sustainable development through building the foundation to enforce QA in RSLC of DW.

Characterising near misses and injuries in the temporary agency construction workforce: qualitative study approach.

OBJECTIVES: To understand and characterise the construct of 'near misses' from the perspective of temporary construction workers and to describe the safety and health risks associated with and contributing to near misses and injuries in temporary workers in the construction industry. METHODS: Six semistructured language-sensitive (ie, English and Spanish) focus group discussions were conducted with workers (n=43) employed with temporary staffing agencies in South Florida. This convenience sample completed a demographic questionnaire prior to the focus group discussion. A general inductive approach was used to examine near misses in the construction industry and the unique safety and health concerns of temporary workers. RESULTS: Four broad themes describing near misses, reporting practices and workplace safety hazards in the construction industry were derived from the group discussions: (1) non-standard workers in the construction industry draw a clear distinction between near misses and injury and believe their best protections from both occur at the worker level; (2) social network structure on construction worksites is an effective way to protect workers against injury and near misses; (3) safety and health priorities and policies at the organisational level differ from those at the worker level, which contributes to workplace injury; and (4) reporting of safety concerns and near misses is influenced by injury severity. CONCLUSIONS: Temporary workers in the construction industry are familiar with near misses but have limited resources to protect themselves against potential health and safety hazards. These non-standard workers addressed unique barriers to staying safe at work and identified potential improvements.