Aramid-Reinforced UV Curable Adhesive Resins for Use As an Interlayer in Laminated Glass.

Colorless, transparent, and mechanically robust aramid polymers are synthesized from two diamine monomers with strong electron-withdrawing groups, using low-temperature solution condensation with diacid chloride. The aramids dissolved very well in the liquid acrylamide monomers. When N,N-dimethylacrylamide (DMA) is used as a reactive diluent, films with the desired features are produced from the hybrid aramid-DMA resins via ultraviolet (UV) curing. The hybrid films are colorless and transparent in the visible region and showed an increase in the glass transition temperature, tensile strength, and elastic modulus in proportion to the aramid content. Laminated glass is manufactured using the hybrid resin as an interlayer, which exhibits very strong adhesion between the two sheets of glass, is not easily broken by an external impact, and do not scatter fragments. Moreover, the laminated glass do not distort images and functioned very effectively in UV blocking, soundproofing, and suppressing changes in the ambient temperature. Heat treatment further improves the light transmittance and impact resistance of the laminated glass. Laminated glass specimens with various fluorescence colors are also manufactured. Aramid-reinforced films prepared using N,N-diethylacrylamide as a reactive diluent underwent thermally induced phase separation in a wet state, providing smart glass with a privacy protection function.

Skin-Integrated Electrodes Based on Room-Temperature Curable, Highly Conductive Silver/Polydimethylsiloxane Composites.

The quality of electrophysiological (EP) signals heavily relies on the electrode's contact with the skin. However, motion or exposure to water can easily destabilize this connection. In contrast to traditional methods of attaching electrodes to the skin surface, this study introduces a skin-integration strategy inspired by the skin's intergrown structure. A highly conductive and room-temperature curable composite composed of silver microflakes and polydimethylsiloxane (Ag/PDMS) is applied to the skin. Before curing, the PDMS oil partially diffuse into the stratum corneum (SC) layer of the skin. Upon curing, the composite solidifies into an electrode that seamlessly integrated with the skin, resembling a natural extension. This skin-integration strategy offers several advantages. It minimizes motion artifacts resulting from relative electrode-skin displacement, significantly reduces interface impedance (67% of commercial Ag/AgCl gel electrodes at 100 Hz) and withstands water flushes due to its hydrophobic nature. These advantages pave the way for promising advancements in EP signal recording, particularly during motion and underwater conditions.

Exploring endophytic bacteria communities of Vanilla planifolia.

BACKGROUND: Rhizosphere bacterial community and endophytes are now known to influence plant health and response to environmental stress. Very few studies have reported the diversity of endophytic bacterial communities of Vanilla planifolia and their potential roles in promoting plant growth or contributing to aromatic quality. RESULTS: In this study, the composition and diversity of the Vanilla rhizosphere bacterial community were explored by analyzing rhizosphere soil and root tissue samples as well as green pods of three accessions of Vanilla planifolia grown on different types of substrates (compost and leaf litter). In addition, the endophytic bacterial diversity of roots and green pods as well as the evolution of endophytic bacteria after the curing process of vanilla green pods were analyzed based on a metabarcoding approach. The results showed that bacterial species richness and diversity were higher in the compost. The analysis of the soil bacterial composition displayed that Halomonas, Pseudoalteromonas, Enterobacter and Bradyrhizobium were the most abundant genera. Moreover, the results indicated that the soil bacterial community structure was linked to the host plant genotype. Regarding the roots endophytic bacteria composition, the genera Halomonas, Pseudoalteromonas, Bacillus and Carboxydocella genera were present in all samples, independently from the substrate nature. Several genera including Bacillus, Bradyrhizobium, Burkholderia and Halomonas were transmitted internally from the roots to the green pods. The curing process reduced the bacterial richness and bacterial diversity associated with the green pods. Halomonas, Pseudoalteromonas, Bacillus, and Carboxydocella are the dominant genera in the pods after the curing process. CONCLUSIONS: This study provides an overview of changes of the bacterial communities dynamics especially endophytic in the roots and the green pods. It highlighted bacterial genera (Halomonas, Pseudoalteromonas, Bacillus, and Carboxydocella) potentially implicated in the formation of aroma compounds of vanilla beans.

Phenotypic and molecular characterization of extended spectrum- and metallo- beta lactamase producing Pseudomonas aeruginosa clinical isolates from Egypt.

BACKGROUND: Antimicrobial resistance among Pseudomonas aeruginosa (P. aeruginosa), a leading cause of nosocomial infections worldwide, is escalating. This study investigated the prevalence of extended-spectrum ß-lactamases (ESBLs) and metallo-ß-lactamases (MBLs) among 104 P. aeruginosa clinical isolates from Alexandria Main University Hospital, Alexandria, Egypt. METHODS: Antimicrobial susceptibility testing was performed using agar dilution technique, or broth microdilution method in case of colistin. ESBL and MBL prevalence was assessed phenotypically and genotypically using polymerase chain reaction (PCR). The role of plasmids in mediating resistance to extended-spectrum ß-lactams was studied via transformation technique using plasmids isolated from ceftazidime-resistant isolates. RESULTS: Antimicrobial susceptibility testing revealed alarming resistance rates to carbapenems, cephalosporins, and fluoroquinolones. Using PCR as the gold standard, phenotypic methods underestimated ESBL production while overestimating MBL production. Eighty-five isolates (81.7%) possessed only ESBL encoding genes, among which 69 isolates harbored a single ESBL gene [blaOXA-10 (n = 67) and blaPER (n = 2)]. Four ESBL-genotype combinations were detected: blaPER + blaOXA-10 (n = 8), blaVEB-1 + blaOXA-10 (n = 6), blaPSE + blaOXA-10 (n = 1), and blaPER + blaVEB-1 + blaOXA-10 (n = 1). Three isolates (2.9%) possessed only the MBL encoding gene blaVIM. Three ESBL + MBL- genotype combinations: blaOXA-10 + blaAIM, blaOXA-10 + blaVIM, and blaPER + blaOXA-10 + blaAIM were detected in 2, 1 and 1 isolate(s), respectively. Five plasmid preparations harboring blaVEB-1 and blaOXA-10 were successfully transformed into chemically competent Escherichia coli DH5α with transformation efficiencies ranging between 6.8 × 10 3 and 3.7 × 10 4 CFU/µg DNA plasmid. Selected tested transformants were ceftazidime-resistant and harbored plasmids carrying blaOXA-10. CONCLUSIONS: The study highlights the importance of the expeditious characterization of ESBLs and MBLs using genotypic methods among P. aeruginosa clinical isolates to hinder the development and dissemination of multidrug resistant strains.

Microstructure Evolution of Reactive Polyurethane Films During In Situ Polyaddition and Film-Formation Processes.

Due to the advantages of low energy consumption, no air and water pollutions, the reactive polyurethane films (RPUFs) are replacing the solvated and waterborne PUFs nowadays, which significantly promotes the green and low-carbon production of PU films. However, the microstructure evolution and in situ film-formation mechanism of RPUFs in solvent-free media are still unclear. Herein, according to time-temperature equivalence principle, the in situ polyaddition and film-formation processes of RPUFs generated by the typical polyaddition of diisocyanate terminated prepolymer (component B) and polyether glycol (component A) are thoroughly investigated at 25 °C. According to the temporal change of viscosity, the RPUFs gradually transfer from liquid to gel and finally to solid state. Further characterizing the molecular weight, hydrogen bonds, crystallinity, gel content, and phase images, the polyaddition and film-formation processes can be divided into three stages as 1) chain extension and microcrystallization; 2) gelation and demicrocrystallization; 3) microphase separation and film-formation. This work promotes the understanding of the microstructure evolution and film-formation mechanism of RPUFs, which can be used as the theoretical guidance for the controllable preparation of high-performance products based on RPUFs.

Use of municipal solid waste incineration fly ash as a supplementary cementitious material: CO2 mineralization coupled with mechanochemical pretreatment.

The use of municipal solid waste incineration fly ash, commonly referred to as "fly ash", as a supplementary cementitious material (SCM), has been explored to mitigate the CO2 emissions resulting from cement production. Nevertheless, the incorporation of fly ash as an SCM in mortar has been shown to weaken its compressive strength and increase the risk of heavy metal leaching. In light of these challenges, this study aims to comprehensively evaluate the influence of CO2 pressure, temperature, and residual water/binder ratio on the CO2 uptake and compressive strength of mortar when combined with fly ash. Additionally, this study systematically examines the feasibility of mechanochemical pretreatment, which enhances the homogenization of fly ash and augments the density of the mortar's microstructure. The results indicate that the use of mechanochemical pretreatment leads to a notable 43.6% increase in 28-day compressive strength and diminishes the leaching of As, Ba, Ni, Pb, Se, and Zn by 17.9-77.8%. Finally, a reaction kinetics model is proposed to elucidate the CO2 sequestration process under varying conditions. These findings offer valuable guidance for incorporating fly ash as an SCM and CO2 sequestrator in mortar.

In vivo cloning of PCR product via site-specific recombination in Escherichia coli.

Over the past years, several methods have been developed for gene cloning. Choosing a cloning strategy depends on various factors, among which simplicity and affordability have always been considered. The aim of this study, on the one hand, is to simplify gene cloning by skipping in vitro assembly reactions and, on the other hand, to reduce costs by eliminating relatively expensive materials. We investigated a cloning system using Escherichia coli harboring two plasmids, pLP-AmpR and pScissors-CmR. The pLP-AmpR contains a landing pad (LP) consisting of two genes (λ int and λ gam) that allow the replacement of the transformed linear DNA using site-specific recombination. After the replacement process, the inducible expressing SpCas9 and specific sgRNA from the pScissors-CmR (CRISPR/Cas9) vector leads to the removal of non-recombinant pLP-AmpR plasmids. The function of LP was explored by directly transforming PCR products. The pScissors-CmR plasmid was evaluated for curing three vectors, including the origins of pBR322, p15A, and pSC101. Replacing LP with a PCR product and fast-eradicating pSC101 origin-containing vectors was successful. Recombinant colonies were confirmed following gene replacement and plasmid curing processes. The results made us optimistic that this strategy may potentially be a simple and inexpensive cloning method. KEY POINTS: •The in vivo cloning was performed by replacing the target gene with the landing pad. •Fast eradication of non-recombinant plasmids was possible by adapting key vectors. •This strategy is not dependent on in vitro assembly reactions and expensive materials.

Effect of high irradiance and short exposure times on the depth of cure of six bulk-fill resin composites.

This study examined the effect of high irradiance and short exposure times on the depth of cure of six resin-based composites (RBCs). Bluephase PowerCure and the Valo X light-curing units (LCUs) were used to photocure bulk-fill RBCs for their recommended exposure times: Admira Fusion x-tra (AFX/20s), Aura Bulk Fill (ABF/20s), Filtek One Bulk Fill (FOB/20s), Opus Bulk Fill APS (OBF/30s), Tetric EvoCeram Bulk Fill (TEC/10s) and Tetric PowerFill (TPF/10s). In addition, all bulk-fill RBCs were tested for depth of cure with one short 3 s exposure time from the Bluephase PowerCure or the Valo X in the Xtra Power mode. The RBCs (n = 10 per RBC) were inserted into a 4 mm diameter metal mold and covered by a polyester strip before being photocured. After 24 h of storage, uncured RBC was scraped away to determine the depth of cure of the RBCs. None of the RBCs achieved a 4 mm depth of cure. The depth of cure of TEC and TPF was unaffected by the exposure times (recommended or short) when using the Valo X. The depth of cure of AFX/20s, AFX/Xtra Power, ABF/Xtra Power, FOB/Xtra Power, and OBF/30s RBCs was greater when using Valo X compared to the Bluephase PowerCure. It was concluded that short exposure times can reduce depth of cure and should only be used for some RBCs.

Construction of amine-rich coating utilizing amine curing reaction of triglycidyl isocyanate with triethylenetetramine on the surface of poly(styrene-divinylbenzene) microspheres for preparation of anion exchange stationary phase.

Epoxy resins, as important thermosetting polymers, exhibit excellent adhesion to various substrates. In view of this, reticulate coating of triglycidyl isocyanate with triethylenetetramine was introduced onto the surface of poly(styrene-divinylbenzene) utilizing amine curing reaction to obtain poly(styrene-divinylbenzene)@triglycidyl isocyanate-triethylenetetramine composite microspheres. The amino groups and epoxy groups of triglycidyl isocyanate-triethylenetetramine endowed poly(styrene-divinylbenzene) with good reactivity, which could be quaternized under mild conditions to obtain an anion exchange chromatographic stationary phase. The quaternized poly(styrene-divinylbenzene)@triglycidyl isocyanate-triethylenetetramine was characterized by scanning electron microscope, Fourier-transform infrared spectroscopy, N2 adsorption-desorption experiment, et al. The chromatographic performance of the customized column was evaluated by separating seven conventional anions, organic weak acids, and carbohydrates. Poly(styrene-divinylbenzene)@triglycidyl isocyanate-triethylenetetramine possesses the uniform size of poly(styrene-divinylbenzene) microspheres and good reactivity of triglycidyl isocyanate-triethylenetetramine, which offers a flexible strategy for the preparation of anion exchange stationary phase. The column exhibits excellent chemical and mechanical stability and chromatographic performance. Finally, the column was successfully applied for the determination of nitrite in pickles.

Cognitive Motor Dissociation: Gap Analysis and Future Directions.

BACKGROUND: Patients with disorders of consciousness who are behaviorally unresponsive may demonstrate volitional brain responses to motor imagery or motor commands detectable on functional magnetic resonance imaging or electroencephalography. This state of cognitive motor dissociation (CMD) may have prognostic significance. METHODS: The Neurocritical Care Society's Curing Coma Campaign identified an international group of experts who convened in a series of monthly online meetings between September 2021 and April 2023 to examine the science of CMD and identify key knowledge gaps and unmet needs. RESULTS: The group identified major knowledge gaps in CMD research: (1) lack of information about patient experiences and caregiver accounts of CMD, (2) limited epidemiological data on CMD, (3) uncertainty about underlying mechanisms of CMD, (4) methodological variability that limits testing of CMD as a biomarker for prognostication and treatment trials, (5) educational gaps for health care personnel about the incidence and potential prognostic relevance of CMD, and (6) challenges related to identification of patients with CMD who may be able to communicate using brain-computer interfaces. CONCLUSIONS: To improve the management of patients with disorders of consciousness, research efforts should address these mechanistic, epidemiological, bioengineering, and educational gaps to enable large-scale implementation of CMD assessment in clinical practice.

Evaluation of the ceramic laminate veneer-tooth interface after different resin cement excess removal techniques.

OBJECTIVES: To compare, in vitro, resin cement excess removal techniques at the veneer-tooth interface. MATERIALS AND METHODS: Anterior human teeth were restored with ceramic veneers and randomly divided according to the following techniques (n = 10): removal of excess resin cement with brush and dental floss, followed by light-curing with Valo (Group 1) or Elipar (Group 2) for 1 min and 40 s; tack-curing with Valo (Group 3) or Elipar (Group 4) for 1 s; and tack-curing with Valo (Group 5) or Elipar (Group 6) for 5 s. The tack-curing was followed by removal of excess with probe and dental floss and light-curing for 1 min and 40 s. The area of excess resin cement (mm2) was measured in micro-CT images using AutoCAD program. The failures at the cervical margin in the X, Y, and Z axes (µm) of greater value were measured using the DataViewer program. The specimens were submitted to microleakage with 2% basic fuchsin. RESULTS: According to the Kruskal-Wallis and multiple comparison test, the highest area of excess resin cement was found in Group 1 (5.06 mm2), which did not differ statistically from Groups 2 (3.70 mm2) and 5 (2.19 mm2). Groups 2, 3 (1.73 mm2), 4 (1.14 mm2), and 5 (2.18 mm2) did not differ statistically. Group 6 (0.77 mm2) obtained the lowest value, which did not differ statistically from Groups 3 and 4. According to the Kruskal-Wallis and Dunn test, there was no significant difference in failures in X (p = 0.981), Y (p = 0.860), and Z (p = 0.638) axes and no significant difference in microleakage (p = 0.203) among the groups. CONCLUSIONS: Tack-curing for 1 s or 5 s, followed by removal of excess resin cement using a probe and a dental floss, tended to result in a lower amount of excess material around the margin. CLINICAL RELEVANCE: The technique used for resin cement excess removal influences the amount of excess leaved at the veneer-tooth interface. Tack-curing for 1 s or 5 s is recommended to mitigate the excess resin cement.

Monitoring of Curing Process of Epoxy Resin by Long-Period Fiber Gratings.

The curing of epoxy resin is a complex thermo-chemical process that is difficult to monitor using existing sensing systems. We monitored the curing process of an epoxy resin by using long-period fiber gratings. The refractive index of the epoxy resin increases during the curing process and can be measured to determine the degree of curing. We employed long-period fiber gratings that are sensitive to the refractive index of an external medium for the measurement of refractive index changes in the resin. We observed that the resonances of long-period fiber gratings increased their depth with the increased refractive index of the resin, which was well described by our simulation taking the coupling to radiation modes into account. We demonstrated that the degree of cure can be estimated from the depth of the grating resonances using a phenomenological model. At the same time, long-period fiber gratings are sensitive to temperature variations and internal strains that are induced during curing. These factors may affect the measurements of curing degree and should also be addressed.

Sensor-Enhanced Thick Laminated Composite Beams: Manufacturing, Testing, and Numerical Analysis.

This study investigates the manufacturing, testing, and analysis of ultra-thick laminated polymer matrix composite (PMC) beams with the aim of developing high-performance PMC leaf springs for automotive applications. An innovative aspect of this study is the integration of Fiber Bragg Grating (FBG) sensors and thermocouples (TCs) to monitor residual strain and exothermic reactions in composite structures during curing and post-curing manufacturing cycles. Additionally, the Calibration Coefficients (CCs) are calculated using Strain Gauge measurement results under static three-point bending tests. A major part of the study focuses on developing a properly correlated Finite Element (FE) model with large deflection (LD) effects using geometrical nonlinear analysis (GNA) to understand the deformation behavior of ultra thick composite beam (ComBeam) samples, advancing the understanding of large deformation behavior and filling critical research gaps in composite materials. This model will help assess the internal strain distribution, which is verified by correlating data from FBG sensors, Strain Gauges (SGs), and FE analysis. In addition, this research focuses on the application of FBG sensors in structural health monitoring (SHM) in fatigue tests under three-point bending with the support of load-deflection sensors: a new approach for composites at this scale. This study revealed that the fatigue performance of ComBeam samples drastically decreased with increasing displacement ranges, even at the same maximum level, underscoring the potential of FBG sensors to enhance SHM capabilities linked to smart maintenance.

Shedding light on the problem: Proficiency and maintenance practices of light-curing units among dental assistants.

BACKGROUND: Proper light curing is crucial for the success of restorative dentistry and to bond brackets to teeth, yet the responsibility is often delegated to dental assistants (DAs). This study assessed the proficiency and maintenance protocols of DAs when using light-curing units (LCUs) in Saudi Arabia. METHODS: Self-administered questionnaires were distributed to practicing DAs. The questionnaire contained sections on knowledge, adherence to best practices, and how to maintain the LCU. Demographic data were collected as well. Descriptive statistics and linear regressions at a significance level of (p = 0.05) were conducted to identify any relationships that influenced the DAs' LCU knowledge, practice, and maintenance protocols. RESULTS: Among the surveyed DAs, 66% were responsible for using the LCU during treatment, 16% used their fingers for support when light curing, 50% held the LCU tip 1-2 mm from the restoration during curing, and 51% did not have a specific maintenance protocol at their workplace. 70% did not know the output from the LCU, and their educational background correlated with knowledge (b = -14.42, p < 0.001). The type of institution type correlated with adherence to best practices (b = -13.65, p = 0.011), and level of knowledge and adherence to maintenance protocols showed a direct correlation (b = 0.002, p = 0.041). CONCLUSIONS: The findings revealed that a significant percentage of the DAs who replied had insufficient knowledge and did not follow the best practices and maintenance protocols for the LCUs they were using. Their educational background and workplace factors influenced this knowledge gap, while the absence of a maintenance protocol and suboptimal practices were associated with the type of institution. CLINICAL SIGNIFICANCE: To maintain the best practice, clinicians and institutions should improve the education and training of DAs. Otherwise, inadequate light curing by the DAs may jeopardize the long-term success of many dental procedures.

Compressive modulus, translucency, and irradiance transmittance of clear PVS materials used for resin injection molding technique.

OBJECTIVES: To evaluate the compressive modulus, translucency, and light curing irradiance transmittance of four clear polyvinyl siloxane (PVS) materials used for the injection molding technique at varying thicknesses, and to assess the correlation between color parameters and irradiance transmittance. MATERIALS AND METHODS: Four clear PVS materials (Exaclear, Clear Bite Matrix, Affinity Crystal, and Memosil 2) were used in this study. Compressive modulus was measured by compressing cylindrical PVS specimens (n = 9; d = 10 mm; t = 6 mm) up to 30% strain using a universal testing machine. For the translucency analysis and irradiance transmittance, specimens (n = 5) were fabricated with five different thicknesses (d = 12 mm and t = 2, 4, 6, 8 and 10 mm). The L*, a, *b* values of specimens were obtained using a CIELab spectrophotometer (CMD-700, Konica Minolta) with calibrated white and black tiles; the translucency parameter was calculated. The same specimens were placed onto a spectrophotometer (MARC Light Collector) to measure irradiance transmitted through the specimens from a light curing unit (Valo Corded, Ultradent). Data were analyzed using analysis of variance (ANOVA) with Tukey post hoc test and the correlation between translucency and irradiance transmittance of materials for each thickness was evaluated using Pearson's correlation. RESULTS: Compressive modulus differences in PVS materials were significant (one-way ANOVA: df = 3, F = 76.27, p < 0.001); Affinity and Memosil 2 were highest with no significant difference between them (Tukey: t = -1.62; p = 0.382). Clear Bite was higher than Exaclear (Tukey: t = -3.70; p = 0.004). Exaclear was lowest. Translucency decreased with thickness (Two-way ANOVA: df = 3, F = 586.53, p < 0.001; thickness: df = 4, F = 1389.34, p < 0.001). Exaclear was most translucent at all thicknesses. L*, a*, b* values varied by material and thickness (L*: df = 3, F = 1213.32, p < 0.001; a*: df = 3, F = 10766.8, p < 0.001; b*: df = 3, F = 3260.42, p < 0.001). Memosil 2 had lowest b* values. Irradiance transmittance was affected by material and thickness (Two-way ANOVA: df = 4, F = 2388.86, p < 0.001). Exaclear had highest irradiance transmission, surpassing control at >6 mm. Violet/blue irradiance ratio decreased with thickness; Exaclear maintained a constant ratio, indicating preserved violet irradiance. There was a strong positive correlation between translucency and light irradiance (Pearson's r = 0.97, R2 = 0.86-0.96). Radiant exposure analysis suggests adjusting the curing time based on PVS thickness for optimal exposure (10 J/cm2) is achievable within 13-14 s for <2 mm and 21-30 s for 8-10 mm with Clear Bite, Affinity, and Memosil 2; whereas Exaclear requires less time. CONCLUSIONS: Compressive modulus in clear PVS materials varied by type; Affinity and Memosil 2 demonstrate higher modulus, offering more stability of the clear mold. Translucency and irradiance transmission through clear PVS materials decreased as their thickness increased, yet Exaclear exceled in maintaining high translucency and superior light transmission capabilities. Additionally, there is a strong positive linear correlation between translucency and light irradiance transmittance, offering a method to adjust curing times effectively based on material translucency. CLINICAL SIGNIFICANCE: The light curing time to adequately polymerize composite through clear impression material may need to be increased, particularly with thicker matrices or less translucent materials.

Evaluation of the information provided in the instruction manuals of dental light-curing units.

OBJECTIVE: This study evaluated the completeness and accuracy of information in LCU instruction manuals from 40 manufacturers. MATERIALS AND METHODS: Instruction manuals from 40 LCUs (20 from leading manufacturers and 20 budget units) were reviewed. Twenty-eight parameters across five categories were assessed using a binary scale (0=incorrect/missing, 1=correct). The categories and their respective evaluation scores were: LCU characteristics (43%), instructions for use (7%), safety precautions (14%), maintenance recommendations (29%), and regulatory certification (7%). These scores were combined to produce a final score. RESULTS: Scores from leading manufacturers ranged between 46-86%, while the budget category ranged from 18-68%. All manuals provided information about the wavelength/spectrum of the LCU. Only Valo X and Valo Cordless reported power values and used the term "irradiance" instead of "intensity." Details such as LED type and active tip emission area were often missing. Instructions on how to use the LCU to photo-cure resins were frequently limited. Although most manuals addressed safety precautions, several lacked details on heat issues and general health precautions. All manuals included maintenance instructions, though information on replacement parts was often missing. Among the LCUs, 85% stated they were CE certified, 32% held both FDA and CE certification, and 63% claimed compliance with ISO and/or IEC standards. CONCLUSIONS: There were notable differences in the completeness and accuracy of the instruction manuals. Manuals from major manufacturers generally provided more comprehensive information than their budget counterparts. CLINICAL SIGNIFICANCE: Instruction manuals should contain accurate information to help clinicians deliver the highest standard of care. The lack of important information about the LCUs in the manuals is concerning.

Influence of universal adhesives and silane coupling primer on bonding performance to CAD-CAM resin-based composites: A laboratory investigation.

OBJECTIVE: Obtaining strong resin bonds to computer-aided design and computer-aided manufacturing (CAD-CAM) resin-based composites with dispersed fillers (CCRBCs) poses a challenge. Therefore, this study aimed to assess the effect of three universal adhesives and a two-component silane coupling agent on the shear bond strength to three (CCRBCs). MATERIALS AND METHODS: Eight hundred and sixty-four specimens of Brilliant Crios, Lava Ultimate, and Tetric CAD were polished or grit blasted, bonded with Adhese Universal DC, One Coat 7 Universal (OC7), and Scotchbond Universal Plus Adhesive (SBU) with or without a silane primer. Shear bond strength was measured after 24 h and 10,000 thermocycles. Linear regressions were performed (α = 0.05). RESULTS: After thermocycling, bond strengths were similar for the universal adhesives on polished Brilliant Crios and Lava Ultimate (p ≥ 0.408). Grit blasted Tetric CAD showed no significant differences (p ≥ 0.096). The silane primer had minimal impact on grit blasted Tetric CAD (p ≥ 0.384). The silane primer increased the bond strength of OC7 to Brilliant Crios (p = 0.001) but decreased the adhesion of SBU to Brilliant Crios and Lava Ultimate (p ≤ 0.018). CONCLUSIONS: Bond strength of universal adhesives varied with CCRBC type. The two-component silane coupling agent showed mixed effects on adhesive performance. CLINICAL SIGNIFICANCE: Selecting universal adhesives from the same CCRBC product line does not always guarantee superior bond strength. The efficacy of silane coupling agents differs based on the bonding substrate.

Elucidation of 4-Hydroxybenzoic Acid Catabolic Pathways in Pseudarthrobacter phenanthrenivorans Sphe3.

4-hydroxybenzoic acid (4-HBA) is an aromatic compound with high chemical stability, being extensively used in food, pharmaceutical and cosmetic industries and therefore widely distributed in various environments. Bioremediation constitutes the most sustainable approach for the removal of 4-hydroxybenzoate and its derivatives (parabens) from polluted environments. Pseudarthrobacter phenanthrenivorans Sphe3, a strain capable of degrading several aromatic compounds, is able to grow on 4-HBA as the sole carbon and energy source. Here, an attempt is made to clarify the catabolic pathways that are involved in the biodegradation of 4-hydroxybenzoate by Sphe3, applying a metabolomic and transcriptomic analysis of cells grown on 4-HBA. It seems that in Sphe3, 4-hydroxybenzoate is hydroxylated to form protocatechuate, which subsequently is either cleaved in ortho- and/or meta-positions or decarboxylated to form catechol. Protocatechuate and catechol are funneled into the TCA cycle following either the ß-ketoadipate or protocatechuate meta-cleavage branches. Our results also suggest the involvement of the oxidative decarboxylation of the protocatechuate peripheral pathway to form hydroxyquinol. As a conclusion, P. phenanthrenivorans Sphe3 seems to be a rather versatile strain considering the 4-hydroxybenzoate biodegradation, as it has the advantage to carry it out effectively following different catabolic pathways concurrently.

Efficient utilization of coral waste for internal curing material to prepare eco-friendly marine geopolymer concrete.

To address shortages in construction materials for island engineering, tackle the accumulation of solid waste, and inhibit the shrinkage of geopolymers, coral waste was utilized as the internal curing material to prepare high-performance marine geopolymer concrete (MGC) with seawater, sea-sand, and normal limestone aggregate (LsA). The coral coarse aggregate (CorA) used in this investigation has a total porosity ranging from 50% to 58.3% with internal pore diameters spanning 50-400 µm. The water desorption of CorA followed a two-stage pattern within a relative humidity (RH) range of 75%-85%, becoming nonlinear above 90% RH, which released about 85% of its moisture within 200 h at 97% RH, demonstrating potential for internal curing. Adding a small amount of CorA to MGC increased slump and setting time by providing internal curing water. However, as CorA content exceeded 30%, the slump significantly decreased due to reduced mixing water and elevated activator concentration, while the initial setting time slightly decreased. Furthermore, the inclusion of saturated CorA in MGC significantly reduced autogenous shrinkage, with higher CorA contents (exceeding 30%) leading to slight expansion in the early stages and nearly eliminating shrinkage at contents above 40%. The greater drying shrinkage in geopolymer systems compared to ordinary Portland cement is due to capillary pressure compressing the product framework, converting larger gel pores into smaller ones. Additionally, the layered calcium aluminosilicate hydrate (C-A-S-H) gel exhibits more pronounced creep characteristics under low internal humidity conditions. The higher CorA content in MGC promoted the formation of hybrid C, N-A-S-H gel and hydrotalcite-like phases, and reduced carbonation issues. The interfacial transition zone (ITZ) between CorA and the geopolymer matrix formed a robust mechanical interlock, enhancing tensile strength and minimizing shrinkage-induced cracks. Based on overall performance and marine material utilization, an optimal substitution rate of CorA between 40% and 50% is recommended.

Non-Isocyanate Urethane Acrylate Derived from Isophorone Diamine: Synthesis, Characterization and Its Application in 3D Printing.

In this paper, urethane-based acrylates (UA) were prepared via an environmentally friendly non-isocyanate route. Isophorone diamine (IPDA) reacted with ethylene carbonate (EC), producing carbamate containing amine and hydroxyl groups, which further reacted with neopentyl glycol diacrylate (NPGDA) by aza Michael addition, forming UA. The structures of the obtained intermediates and UA were characterized by 1H NMR and electrospray ionization high-resolution mass spectrometry (ESI-HRMS). The photopolymerization kinetics of UA were investigated by infrared spectroscopy. The composite with obtained UA can be UV cured quickly to form a transparent film with a tensile strength of 21 MPa and elongation at break of 16%. After UV curing, the mono-functional urethane acrylate was copolymerized into the cross-linked network in the form of side chains. The hydroxyl and carbamate bonds on the side chains have high mobility, which make them easy to form stronger dynamic hydrogen bonds during the tensile process, giving the material a higher tensile strength and elongation at break. Therefore, the hydrogen bonding model of a cross-linked network is proposed. The composite with UA can be 3D printed into models.