Highly Reactive Graphene Dispersant and Its Effective Reinforcement for Phase Change Coatings.

High efficient dispersant that meanwhile possesses additional functions is highly desirable for the fabrication of graphene-based composite. In this paper, a new reactive dispersant, multi-silanols grafted naphthalenediamine (MSiND), is synthesized, which shows superiority compared with conventional dispersants. It can not only stabilize graphene in water at a high concentration of up to 16 mg mL-1, but also simultaneously be applicable for ethanol medium, in which the graphene concentration can be as high as 12 mg mL-1 at the weight ratio of 1:1 (MSiND:graphene). The dispersion is compatible with multi-matrixes and affinity to various substrates. In addition, MSiND exhibits excellent reactivity due to the existence of high-density silanol groups. Tough graphene coatings are constructed on glass slides and non-woven fabric simply by direct painting and dip-coating. Moreover, with the assistance of MSiND, graphene-doped phase-change coatings on hydrophobic non-woven fabric (e.g., functional mask) are prepared via the spray method. The composite coatings show enhanced mechanical strength and excellent energy storage performance, exhibiting great potential in heat preservation and thermotherapy.

Application of biofilm dispersion-based nanoparticles in cutting off reinfection.

Bacterial biofilms commonly cause chronic and persistent infections in humans. Bacterial biofilms consist of an inner layer of bacteria and an autocrine extracellular polymeric substance (EPS). Biofilm dispersants (abbreviated as dispersants) have proven effective in removing the bacterial physical protection barrier EPS. Dispersants are generally weak or have no bactericidal effect. Bacteria dispersed from within biofilms (abbreviated as dispersed bacteria) may be more invasive, adhesive, and motile than planktonic bacteria, characteristics that increase the probability that dispersed bacteria will recolonize and cause reinfection. The dispersants should be combined with antimicrobials to avoid the risk of severe reinfection. Dispersant-based nanoparticles have the advantage of specific release and intense penetration, providing the prerequisite for further antibacterial agent efficacy and achieving the eradication of biofilms. Dispersant-based nanoparticles delivered antimicrobial agents for the treatment of diseases associated with bacterial biofilm infections are expected to be an effective measure to prevent reinfection caused by dispersed bacteria. KEY POINTS: • Dispersed bacteria harm and the dispersant's dispersion mechanisms are discussed. • The advantages of dispersant-based nanoparticles in bacteria biofilms are discussed. • Dispersant-based nanoparticles for cutting off reinfection in vivo are highlighted.

Assessment of spilled oil dispersion affected by dispersant: Characteristic, stability, and related mechanism.

Oil dispersion, a crucial process in oil transport, involves the detachment of oil droplets from slicks and their introduction into the water column, influencing subsequent oil migration and transformation. This study examines oil dispersion, considering characteristics, stability, and mechanisms, while evaluating the impact of dispersants and salinity. Results show the significant role of surfactant type in dispersants on oil dispersion characteristics, with anionic surfactants exhibiting higher sensitivity to salinity changes compared to nonionic surfactants. The dispersion efficiency varies with salinity, with anionic surfactants performing better in low salinity (<20‰) and nonionic surfactants showing superior performance at 30-35‰ salinities. Rheological analysis illustrates the breakup and coalescence of oil droplets within the shear rates of breaking waves. An increase in interfacial film rigidity impedes the coalescence of oil droplets, contributing to the dynamic stability of the oil-water hybrid system. The use of GM-2, a nonionic dispersant, results in the formation of a solid-like interface, characterized by increased elastic modulus, notably at 20‰ salinity. However, stable droplet size distribution (DSD) at 35‰ salinity for 60 h suggests droplets can remain dispersed in seawater. The enhancement of stability of oil dispersion is interpreted as the result of two mechanisms: stabilizing DSD and developing the strength of viscoelastic interfacial film. These findings offer insights into oil dispersion dynamics, highlighting the importance of surfactant selection and salinity in governing dispersion behavior, and elucidating mechanisms underlying dispersion stability.

Preparation of Modified Polycarboxylate by Pyrrolidone for Using as a Dispersant in Cobalt Blue Nano-Pigment Slurry.

In this paper, N-vinylpyrrolidone was copolymerized with acrylic acid and itaconic acid by free radical polymerization, and a series of polyacrylic acid-co-itaconic acid-co-N-vinylpyrrolidone (PAIN) dispersants with different pyrrolidone ligand contents were synthesized and characterized. Then, the cobalt blue nano-pigment slurry (20 wt%) was prepared through a water-based grinding method, and the optimum grinding technology was explored and determined as follows: PAIN2 as a dispersant, a dispersant dosage of 10 wt%, and a grinding time of 480 min. According to this optimum grinding technology, the prepared pigment slurry had a significantly decreased agglomeration, the D90 of which was 82 nm, and separately increased to 130 nm and 150 nm after heat storage for 3 and 7 days, exhibiting excellent heat storage stability. Additionally, its TSI value was also the lowest (1.9%), indicating good dispersion stability. The QCM and adorption capacity measuring results showed PAIN2 had a larger adsorption capacity, and the formed adsorption layer had a higher rigidity and was not easy to fall off. This was caused by both the interaction of carboxyl groups and the pyrrolidone ligand (strong coordination interaction) in PAIN2 with cobalt blue. The XPS and FT-IR measurements further proved the above-mentioned adsorption mechanism.

A dispersive liquid-liquid microextraction followed by reverse-phase high-performance liquid chromatography for QuEChERS determination of chlorogenic acid.

INTRODUCTION: The presence of chlorogenic acid (CGA) not only imparts a characteristic flavour to foods but also makes them useful against chronic diseases and metabolic syndromes, especially diabetes mellitus and asthma. OBJECTIVES: The present study was designed to develop a quick, easy, cheap, effective, rugged, and safe (QuEChERS) and pragmatic method to analyse CGA in plant-based products by applying dispersive liquid-liquid microextraction (DLLME) followed by reverse-phase high-performance liquid chromatography under a diode array detector (RP-HPLC-DAD). METHODOLOGY: The DLLME was carried out using Triton X-100 as a dispersant and ethanol as an extraction solvent, while method development and validation activities were performed on a Shimadzu 10-AT HPLC-DAD system equipped with C-18 columns as stationary phases. RESULTS: The well-resolved peak for the standard CGA was observed at 2.92 min for the mobile phase comprising 0.1% aqueous formic acid-ethanol (22:78 v/v) of pH 3.0 programmed under an isocratic flow rate of 1.0 mL/min. The developed method was found to be linear (R2 = 0.9976) over 1-500 µg/mL of CGA concentration at 328 nm. Moreover, the assay was found to be repeatable with RSD ≤ 5.0, and the limit of detection (LOD) and limit of quantification (LOQ) were 0.0281 and 0.0853 µg/mL of CGA, respectively. The DLLME offered an overall recovery rate between 97.60% and 99.54% at an acceptable level of reproducibility [relative standard deviation (RSD) ≤ 5.0]. CONCLUSION: The developed assay was found to be a QuEChERS and pragmatic choice for the high-throughput analysis of CGA in plant-based products/foods. Finally, the analysis revealed the presence of an ample level of CGA in guava fruit in addition to coffee beans and black tea.

Progress of Dispersants for Coal Water Slurry.

Dispersants, serving as an essential raw material in the formulation of coal water slurry, offer an economical and convenient solution for enhancing slurry concentration, thus stimulating significant interest in the development of novel and efficient dispersants. This paper intends to illuminate the evolution of dispersants by examining both the traditional and the newly conceived types and elaborating on their respective mechanisms of influence on slurry performance. Dispersants can be classified into anionic, cationic, amphoteric, and non-ionic types based on their dissociation properties. They can be produced by modifying either natural or synthetic products. The molecular structure of a dispersant allows for further categorization into one-dimensional, two-dimensional, or three-dimensional structure dispersants. This document succinctly outlines dispersants derived from natural products, three-dimensional structure dispersants, common anionic dispersants such as lignin and naphthalene, and amphoteric and non-ionic dispersants. Subsequently, the adsorption mechanism of dispersants, governed by either electrostatic attraction or functional group effects, is elucidated. The three mechanisms through which dispersants alter the surface properties of coal, namely the wetting dispersion effect, electrostatic repulsion effect, and steric hindrance effect, are also explained. The paper concludes with an exploration of the challenges and emerging trends in the domain of dispersants.

Lignosulfonate-Based Ionic Liquids as Asphaltene Dispersants.

Asphaltenes are recognized as being troublesome from upstream to downstream in the oil industry due to their tendency to precipitate and self-associate. Their extraction from asphaltenic crude oil for a cost-effective refining process is a crucial and critical challenge in the oil and gas sector. Lignosulfonate (LS), as a by-product of the wood pulping process in the papermaking industry, is a highly available and underutilized feedstock. This study aimed to synthesize novel LS-based ionic liquids (ILs) by reacting lignosulfonate acid sodium salt [Na]2[LS] with different alkyl chains of piperidinium chloride for asphaltene dispersion. The synthesized ILs, 1-hexyl-1-methyl-piperidinium lignosulfonate [C6C1Pip]2[LS], 1-octyl-1-methyl-piperidinium lignosulfonate [C8C1Pip]2[LS], 1-dodecyl-1-methyl-piperidinium lignosulfonate [C12C1Pip]2[LS] and 1-hexadecyl-1-methyl-piperidinium lignosulfonate [C16C1Pip]2[LS] were characterized using FTIR-ATR and 1H NMR for functional groups and structural confirmation. The ILs depicted high thermal stability because of the presence of a long side alkyl chain and piperidinium cation following thermogravimetric analysis (TGA). Asphaltene dispersion indices (%) of ILs were tested by varying contact time, temperature and ILs concentration. The obtained indices were high for all ILs, with a dispersion index of more than 91.2% [C16C1Pip]2[LS], representing the highest dispersion at 50,000 ppm. It was able to lower asphaltene particle size diameter from 51 nm to 11 nm. The kinetic data of [C16C1Pip]2[LS] were consistent with the pseudo-second-order kinetic model. The dispersion index (%), asphaltene particle growth and the kinetic model agreed with the molecular modeling studies of the HOMO-LUMO energy of IL holds.

Biocompatible and Biodegradable Surfactants from Orange Peel for Oil Spill Remediation.

Oil spill remediation plays a vital role in mitigating the environmental impacts caused by oil spills. The chemical method is one of the widely recognized approaches in chemical surfactants. However, the most commonly used chemical surfactants are toxic and non-biodegradable. Herein, two biocompatible and biodegradable surfactants were synthesized from orange peel using the ionic liquid 1-butyl-3-methylimidazolium chloride (BMIMCl) and organic solvent dimethylacetamide (CH3CN(CH3)2) as reaction media. The acronyms SOPIL and SOPOS refer to the surfactants prepared with BMIMCl and dimethylacetamide, respectively. The surface tension, dispersant effectiveness, optical microscopy, and emulsion stability test were conducted to examine the comparative performance of the synthesized surfactants. The Baffled flask test (BFT) was carried out to determine the dispersion effectiveness. The toxicity test was performed against zebrafish (Danio rerio), whereas the closed bottle test (CBT) evaluated biodegradability. The results revealed that the critical micelle concentration (CMC) value of SOPIL was lower (8.57 mg/L) than that of SOPOS (9.42 mg/L). The dispersion effectiveness values for SOPIL and SOPOS were 69.78% and 40.30%, respectively. The acute toxicity test demonstrated that SOPIL was 'practically non-toxic' with a median lethal concentration of more than 1000 mg/L after 96 h. The biodegradation rate was recorded as higher than 60% for both surfactants within 28 days, demonstrating their readily biodegradable nature. Considering these attributes, biocompatible and biodegradable surfactants derived from orange peel emerge as a promising and sustainable alternative for oil spill remediation.

Impacts of Frazil Ice on the Effectiveness of Oil Dispersion and Migration of Dispersed Oil.

Oil spills in the Arctic have drawn dramatic attention in recent years. Frazil ice, as the essential formation of sea ice, may affect the effectiveness of dispersants during oil spill response and the associated behaviors of dispersed oil. However, these impacts remain poorly understood, limiting the appropriate usage of dispersants in ice-covered regions. Herein this work explored the effects of frazil ice on the dispersion effectiveness of two dispersants (Corexit 9500A and hydrolyzed shrimp waste) and the migration of dispersed oil within frazil ice. We discovered that frazil ice inhibited dispersion effectiveness by attenuating water velocity. Permeable frazil ice encapsulated 11-30% of dispersed oil, implying a lower oil bioavailability. We thus proposed and verified a microscopic mechanism to unravel the migration of dispersed oil toward permeable constrictions in frazil ice. We predicted the concentration of dispersed oil encapsulated in frazil ice using bed filtration theory and verified the prediction through experiments. Furthermore, the presence of frazil ice can lead to the breakup and coalescence of dispersed oil. Overall, our findings would facilitate the appropriate planning and decision-making of dispersant-based oil spill response and a better understanding of the fate of dispersed oil in the frazil ice-infested ocean.

Legacy and dispersant influence microbial community dynamics in cold seawater contaminated by crude oil water accommodated fractions.

Dispersants, used for combating oil spills, increase hydrocarbon bioavailability promoting their biodegradation. Oil weathering process introduces harmful soluble hydrocarbons, such as polycyclic aromatic hydrocarbons (PAHs), into the water column, resulting in water-accommodated fraction (WAF). The presence of dispersants can influence the weathering process by increasing PAHs solubility, toxicity and biodegradability. However, little is known on how dispersants affect microbial communities and their degradation capacities, especially in cold environment where low temperature decreases microbial activity and thus hydrocarbon degradation. Here, we investigated the microbial community dynamics in cold water contaminated by WAF prepared from crude oil with or without a commercial dispersant (Finasol OSR52). The WAFs, prepared with Naphthenic North Atlantic crude oil, were used to contaminate seawater from Norwegian cold sites, one oil-contaminated and the other pristine. The WAF-contaminated seawaters were maintained in microcosms at 4 °C for 21 days. The content of PAHs and microbial compositions (16S rRNA gene sequencing) were determined at days 0, 7, 14 and 21. In addition, the 96 h toxicity assay with adult Acartia tonsa revealed WAFs toxicity at days 0 and 21. The toxicity of WAF mixtures, with and without dispersant, against Acartia tonsa was reduced during the experiment, but PAHs removal was not increased. The water from the oil-contaminated site showed the highest PAHs removal revealing legacy effect (presence of microorganisms adapted to PAHs). Additionally, our results reveal: i) microbial community plasticity allowing the adaptation to the presence of PAHs and dispersant, ii) specific bacteria taxa probably involved in PAHs degradation, and iii) dispersants shape the microbial communities dynamics by stimulating potential dispersant-degrading taxa, such as Fusibacter. Thus, our results provide valuable insights on the role of microbial community in determining the fate of water-solubilized hydrocarbon in cold environment while questioning the role of dispersant used for fighting oil spill.

Incidence of chronic respiratory conditions among oil spill responders: Five years of follow-up in the Deepwater Horizon Oil Spill Coast Guard Cohort study.

BACKGROUND: Over ten years after the Deepwater Horizon (DWH) oil spill, our understanding of long term respiratory health risks associated with oil spill response exposures is limited. We conducted a prospective analysis in a cohort of U.S. Coast Guard personnel with universal military healthcare. METHODS: For all active duty cohort members (N = 45,193) in the DWH Oil Spill Coast Guard Cohort Study we obtained medical encounter data from October 01, 2007 to September 30, 2015 (i.e., ~2.5 years pre-spill; ~5.5 years post-spill). We used Cox Proportional Hazards regressions to calculate adjusted hazard ratios (aHR), comparing risks for incident respiratory conditions/symptoms (2010-2015) for: responders vs. non-responders; responders reporting crude oil exposure, any inhalation of crude oil vapors, and being in the vicinity of burning crude oil versus responders without those exposures. We also evaluated self-reported crude oil and oil dispersant exposures, combined. Within-responder comparisons were adjusted for age, sex, and smoking. RESULTS: While elevated aHRs for responder/non-responder comparisons were generally weak, within-responder comparisons showed stronger risks with exposure to crude oil. Notably, for responders reporting exposure to crude oil via inhalation, there were elevated risks for allsinusitis (aHR = 1.48; 95%CI, 1.06-2.06), unspecified chronic sinusitis (aHR = 1.55; 95%CI, 1.08-2.22), chronic obstructive pulmonary disease (COPD) and other allied conditions (aHR = 1.43; 95%CI, 1.00-2.06), and dyspnea and respiratory abnormalities (aHR = 1.29; 95%CI, 1.00-1.67); there was a suggestion of elevated risk for diseases classified as asthma and reactive airway diseases (aHR = 1.18; 95%CI, 0.98-1.41), including the specific condition, asthma (aHR = 1.35; 95%CI, 0.80-2.27), the symptom, shortness of breath (aHR = 1.50; 95%CI, 0.89-2.54), and the overall classification of chronic respiratory conditions (aHR = 1.18; 95%CI, 0.98-1.43). Exposure to both crude oil and dispersant was positively associated with elevated risk for shortness of breath (HR = 2.24; 95%CI, 1.09-4.64). CONCLUSIONS: Among active duty Coast Guard personnel, oil spill clean-up exposures were associated with moderately increased risk for longer term respiratory conditions.

Emerging bio-dispersant and bioremediation technologies as environmentally friendly management responses toward marine oil spill: A comprehensive review.

Marine oil spills emanating from wells, pipelines, freighters, tankers, and storage facilities draw public attention and necessitate quick and environmentally friendly response measures. It is sometimes feasible to contain the oil with booms and collect it with skimmers or burn it, but this is impracticable in many circumstances, and all that can be done without causing further environmental damage is adopting natural attenuation, particularly through microbial biodegradation. Biodegradation can be aided by carefully supplying biologically accessible nitrogen and phosphorus to alleviate some of the microbial growth constraints at the shoreline. This review discussed the characteristics of oil spills, origin, ecotoxicology, health impact of marine oils spills, and responses, including the variety of remedies and responses to oil spills using biological techniques. The different bioremediation and bio-dispersant treatment technologies are then described, with a focus on the use of green surfactants and their advances, benefits/drawbacks. These technologies were thoroughly explained, with a timeline of research and recent studies. Finally, the hurdles that persist as a result of spills are explored, as well as the measures that must be taken and the potential for the development of existing treatment technologies, all of which must be linked to the application of integrated procedures.

Magnetic CuFe2O4 Nanoparticles with Pseudocapacitive Properties for Electrical Energy Storage.

This investigation is motivated by increasing interest in the development of magnetically ordered pseudocapacitors (MOPC), which exhibit interesting magnetocapacitive effects. Here, advanced pseudocapacitive properties of magnetic CuFe2O4 nanoparticles in negative potential range are reported, suggesting that CuFe2O4 is a promising MOPC and advanced negative electrode material for supercapacitors. A high capacitance of 2.76 F cm-2 is achieved at a low electrode resistance in a relatively large potential window of 0.8 V. The cyclic voltammograms and galvanostatic charge-discharge data show nearly ideal pseudocapacitive behavior. Good electrochemical performance is achieved at a high active mass loading due to the use of chelating molecules of ammonium salt of purpuric acid (ASPA) as a co-dispersant for CuFe2O4 nanoparticles and conductive multiwalled carbon nanotube (MCNT) additives. The adsorption of ASPA on different materials is linked to structural features of ASPA, which allows for different interaction and adsorption mechanisms. The combination of advanced magnetic and pseudocapacitive properties in a negative potential range in a single MOPC material provides a platform for various effects related to the influence of pseudocapacitive/magnetic properties on magnetic/pseudocapacitive behavior.

Application of Rhamnolipids as Dispersing Agents for the Fabrication of Composite MnO2-Carbon Nanotube Electrodes for Supercapacitors.

The high theoretical capacitance of MnO2 renders it a promising material for the cathodes of asymmetric supercapacitors. The good dispersion of MnO2 and conductive additives in a nanocomposite electrode is a key factor for efficient electrode performance. This article describes, for the first time, the application of rhamnolipids (RL) as efficient natural biosurfactants for the fabrication of nanocomposite MnO2-carbon nanotube electrodes for supercapacitors. RL act as co-dispersants for MnO2 and carbon nanotubes and facilitate their efficient mixing, which allows for advanced capacitive properties at an active mass of 40 mg cm-2 in Na2SO4 electrolytes. The highest capacitance obtained from the cyclic voltammetry data at a scan rate of 2 mV s-1 is 8.10 F cm-2 (202.6 F g-1). The highest capacitance obtained from the galvanostatic charge-discharge data at a current density of 3 mA cm-2 is 8.65 F cm-2 (216.16 F g-1). The obtained capacitances are higher than the capacitances of MnO2-based electrodes of the same active mass reported in the literature. The approach developed in this investigation is simple compared to other techniques used for the fabrication of electrodes with high active mass. It offers advantages of using a biocompatible RL biosurfactant.

Controlling Graphene Wrinkles through the Phase Transition of a Polymer with a Low Critical Solution Temperature.

A novel method for controlling reduced graphene oxide (rGO) wrinkles through a phase transition in a solution using a low critical solution temperature (LCST) polymer dispersant has been developed. The polymer dispersant is designed by control of architecture and composition using reversible addition-fragmentation chain transfer polymerization. Synthesized poly(2-(dimethylaminoethyl) methacrylate-block-styrene) (PDbS) can be successfully functionalized on the rGO surface via noncovalent functionalization. PDbS-functionalized rGO (PDbS-rGO) exhibits good dispersibility in an aqueous phase at room temperature and forms wrinkles on the PDbS-rGO surface because of phase transition at the LCST of the polymer dispersant. The formation of PDbS-rGO wrinkles is controlled by varying the aggregation number of the polymer dispersant on the PDbS-rGO surface that strongly depends on temperature. This is confirmed by transmission electron microscopy, scanning electron microscopy, and Raman spectroscopy (ID' /IG ratios are 0.560, 0.579, and 0.684, which correspond to 45, 70, and 95 °C, respectively). In addition, the mechanism of wrinkle control is proved by gold nanoparticles that are grown in polymer dispersant on the PDbS-rGO surface.

Dispersant Molecules with Functional Catechol Groups for Supercapacitor Fabrication.

Cathodes for supercapacitors with enhanced capacitive performance are prepared using MnO2 as a charge storage material and carbon nanotubes (CNT) as conductive additives. The enhanced capacitive properties are linked to the beneficial effects of catecholate molecules, such as chlorogenic acid and 3,4,5-trihydroxybenzamide, which are used as co-dispersants for MnO2 and CNT. The dispersant interactions with MnO2 and CNT are discussed in relation to the chemical structures of the dispersant molecules and their biomimetic adsorption mechanisms. The dispersant adsorption is a key factor for efficient co-dispersion in ethanol, which facilitated enhanced mixing of the nanostructured components and allowed for improved utilization of charge storage properties of the electrode materials with high active mass of 40 mg cm-2. Structural peculiarities of the dispersant molecules are discussed, which facilitate dispersion and charging. Capacitive properties are analyzed using cyclic voltammetry, chronopotentiometry and impedance spectroscopy. A capacitance of 6.5 F cm-2 is achieved at a low electrical resistance. The advanced capacitive properties of the electrodes are linked to the microstructures of the electrodes prepared in the presence of the dispersants.

Oil dispersant Corexit 9500 is weakly estrogenic, but does not skew the sex ratio in Alligator mississippiensis.

During the Deepwater Horizon oil spill, vast quantities of a chemical dispersant Corexit 9500 were applied in remediation efforts. In addition to the acute toxicity, it is essential to evaluate Corexit further with a broader scope of long-term sublethal endocrine endpoints. The American alligator (Alligator mississippiensis) is an excellent organism for such an endeavor. It exhibits temperature-dependent sex determination, in which egg incubation temperatures during a thermosensitive period (TSP) in embryonic development determine the sex of embryos. Estrogen signals play a critical role in this process. For example, a single exposure to exogenous estrogen during the TSP overrides the effects of temperature and leads to skewed sex ratios. At a concentration of 100 ppm, Corexit significantly induced transcriptional activity of both alligator nuclear estrogen receptors 1 and 2 in vitro in reporter gene assays. To investigate the estrogenic effects of Corexit on gonadal development, alligator eggs were exposed to Corexit at environmentally relevant concentrations (0.25, 2.5 and 25 ppm) before the TSP in ovo. Exposure to Corexit at 0.25 and 25 ppm significantly delayed hatching and growth. Corexit exposure at any treatment level did not affect sex ratios or testicular mRNA abundance as measured at 1-week post-hatching, suggesting that the combination of Corexit components did not synergize enough to induce ovarian development in ovo. These results point to a need for further investigations on individual and combined components of Corexit to understand better their long-term effects on the development and reproductive health of alligators and other coastal aquatic wildlife.

Petroleum dynamics in the sea and influence of subsea dispersant injection during Deepwater Horizon.

During the Deepwater Horizon disaster, a substantial fraction of the 600,000-900,000 tons of released petroleum liquid and natural gas became entrapped below the sea surface, but the quantity entrapped and the sequestration mechanisms have remained unclear. We modeled the buoyant jet of petroleum liquid droplets, gas bubbles, and entrained seawater, using 279 simulated chemical components, for a representative day (June 8, 2010) of the period after the sunken platform's riser pipe was pared at the wellhead (June 4-July 15). The model predicts that 27% of the released mass of petroleum fluids dissolved into the sea during ascent from the pared wellhead (1,505 m depth) to the sea surface, thereby matching observed volatile organic compound (VOC) emissions to the atmosphere. Based on combined results from model simulation and water column measurements, 24% of released petroleum fluid mass became channeled into a stable deep-water intrusion at 900- to 1,300-m depth, as aqueously dissolved compounds (∼23%) and suspended petroleum liquid microdroplets (∼0.8%). Dispersant injection at the wellhead decreased the median initial diameters of simulated petroleum liquid droplets and gas bubbles by 3.2-fold and 3.4-fold, respectively, which increased dissolution of ascending petroleum fluids by 25%. Faster dissolution increased the simulated flows of water-soluble compounds into biologically sparse deep water by 55%, while decreasing the flows of several harmful compounds into biologically rich surface water. Dispersant injection also decreased the simulated emissions of VOCs to the atmosphere by 28%, including a 2,000-fold decrease in emissions of benzene, which lowered health risks for response workers.

Adsorption Properties of Comb-Shaped Polycarboxylate Dispersant onto Different Crystal Pyraclostrobin Particle Surfaces.

The stability of the suspension system of the two crystal forms of pyraclostrobin is evaluated using multiple light technology, and the adsorption performance of polycarboxylate dispersant on the surface of two different crystalline pyraclostrobin particles is compared in combination with XRD, FTIR, XPS, and SEM from the microscopic view. The adsorption kinetics and thermodynamics studies of 2700 on the surfaces of different crystalline forms of pyraclostrobin particles show that the adsorption process of 2700 on the surfaces of pyraclostrobin crystal forms II and IV conform to pseudo-second-order kinetic adsorption model. The Ea values for crystal forms II and IV are 12.93 and 14.39 kJ∙mol-1, respectively, which indicates that both adsorption processes are physical adsorption. The adsorption models of 2700 on the surfaces of pyraclostrobin crystal forms II and IV are in accordance with Langmuir adsorption isotherms. The ∆Gad values of crystal forms II and IV are negative and the ∆Sad values are positive at different temperatures. Therefore, the adsorption processes are spontaneous and accompanied by entropy increase. The results of this study provide an important theoretical basis for the selection of polycarboxylate dispersants in the suspension of pyraclostrobin. This study also provides a reference for the research of polycrystalline pesticide suspension concentrate.

Enhanced marine monitoring and toxicity study of oil spill dispersants including Corexit EC9500A in the presence of diluted bitumen.

Observations made for the analysis of the oil spill dispersant tracer dioctyl sulfosuccinate (DOSS) during LC50 toxicity testing, highlighted a stability issue for this tracer compound in seawater. A liquid chromatography high-resolution quadrupole time-of-flight mass spectrometry (LC/QToF) was used to confirm monooctyl sulfosuccinate (MOSS) as the only significant DOSS breakdown product, and not the related isomer, 4-(2-ethylhexyl) 2-sulfobutanedioate. Combined analysis of DOSS and MOSS was shown to be applicable to monitoring of spill dispersants Corexit® EC9500A, Finasol OSR52, Slickgone NS, and Slickgone EW. The unassisted conversion of DOSS to MOSS occurred in all four oil spill dispersants solubilized in seawater, although differences were noted in the rate of MOSS formation. A marine microcosm study of Corexit EC9500A, the formulation most rapid to form MOSS, provided further evidence of the stoichiometric conversion of DOSS to MOSS under conditions relevant to real world dilbit spill. Results supported combined DOSS and MOSS analysis for the monitoring of spill dispersant in a marine environment, with a significant extension of sample collection time by 10 days or longer in cooler conditions. Implications of the unassisted formation of MOSS and combined DOSS:MOSS analysis are discussed in relation to improving dispersant LC50 toxicity studies.