Revealing the missing puzzle piece of concentration in regulating Zn electrodeposition.

Despite achievements in suppressing dendrites and regulating Zn crystal growth, secondary aqueous Zn batteries are still rare in the market. Existing strategies mainly focus on electrode modification and electrolyte optimization, while the essential role of ion concentration in liquid-to-solid electrodeposition is neglected for a long time. Herein, the mechanism of concentration regulation in Zn electrodeposition is investigated in depth by combining electrochemical tests, post hoc characterization, and multiscale simulations. First, initial Zn electrodeposition is thermodynamically controlled epitaxial growth, whereas with the rapid depletion of ions, the concentration overpotential transcends the thermodynamic influence to kinetic control. Then, the evolution of the morphology from 2D sheets to 1D whiskers due to the concentration change is insightfully revealed by the morphological characterization and phase-field modeling. Furthermore, the depth of discharge (DOD) results in large concentration differences at the electrode-electrolyte interface, with a mild concentration distribution at lower DOD generating (002) crystal plane 2D sheets and a heavily varied concentration distribution at higher DOD yielding arbitrarily oriented 3D blocks. As a proof of concept, relaxation is introduced into two systems to homogenize the concentration distribution, revalidating the essential role of concentration in regulating electrodeposition, and two vital factors affecting the relaxation time, i.e., current density and electrode distance, are deeply investigated, demonstrating that the relaxation time is positively related to both and is more sensitive to the electrode distance. This work contributes to reacquainting aqueous batteries undergoing phase transitions and reveals a missing piece of the puzzle in regulating Zn electrodeposition.

Extending Cycling Life Beyond 300 000 Cycles in Aqueous Zinc Ion Capacitors Through Additive Interface Engineering.

Developing low-cost and long-cycling-life aqueous zinc (Zn) ion capacitors (AZICs) for large-scale electrochemical energy storage still faces the challenges of dendritic Zn deposition and interfacial side reactions. Here, an interface engineering strategy utilizing a dibenzenesulfonimide (BBI) additive is employed to enhance the stability of the Zn metal anode/electrolyte interface. The first-principles calculation results demonstrate that BBI anions can be chemically adsorbed on Zn metal. Meanwhile, the experimental results confirm that the BBI-Zn interfacial layer converts the original water-richelectric double layer (EDL) into a water-poor EDL, effectively inhibiting the water related parasitic reaction at the electrode/electrolyte interface. In addition, the BBI-Zn interfacial layer introduces an additional Zn ions (Zn2+) migration energy barrier, increasing the Zn2+ de-solvation activation energy, consequently raising the Zn2+ nucleation overpotential, and thus achieving the compact and uniform Zn deposition behavior. Furthermore, the solid electrolyte interphase (SEI) layer derived from the BBI-Zn interfacial layer during cycling can further maintain the interfacial stability of the Zn anode. Owing to the above favorable features, the assembled AZIC exhibits an ultra-long cycling life of over 300 000 cycles based on the additive engineering strategy, which shows application prospects in high-performance AZICs.

Designing Compatible Ceramic/Polymer Composite Solid-State Electrolyte for Stable Silicon Nanosheet Anodes.

The commercialization of silicon anode for lithium-ion batteries has been hindered by severe structure fracture and continuous interfacial reaction against liquid electrolytes, which can be mitigated by solid-state electrolytes. However, rigid ceramic electrolyte suffers from large electrolyte/electrode interfacial resistance, and polymer electrolyte undergoes poor ionic conductivity, both of which are worsened by volume expansion of silicon. Herein, by dispersing Li1.3Al0.3Ti1.7(PO4)3 (LATP) into poly(vinylidene fluoride)-hexafluoropropylene (PVDF-HFP) and poly(ethylene oxide) (PEO) matrix, the PVDF-HFP/PEO/LATP (PHP-L) solid-state electrolyte with high ionic conductivity (1.40 × 10-3 S cm-1), high tensile strength and flexibility is designed, achieving brilliant compatibility with silicon nanosheets. The chemical interactions between PVDF-HFP and PEO, LATP increase amorphous degree of polymer, accelerating Li+ transfer. Good flexibility of the PHP-L contributes to adaptive structure variation of electrolyte with silicon expansion/shrinkage, ensuring swift interfacial ions transfer. Moreover, the solid membrane with high tensile limits electrode structural degradation and eliminates continuous interfacial growth to form stable 2D solid electrolyte interface (SEI) film, achieving superior cyclic performance to liquid electrolytes. The Si//PHP-L15//LiFePO4 solid-state full-cell exhibits stable lithium storage with 81% capacity retention after 100 cycles. This work demonstrates the effectiveness of composite solid electrolyte in addressing fundamental interfacial and performance challenges of silicon anodes.

Modified Ion Migration via Multi-Ion Competitive Transportation for Stable Aqueous Zn Metal Batteries.

The application of metal batteries is seriously affected by active ions transport and deposition stability during operation. This article takes water-based Zn metal electrodes as an example to analyze the factors that affect ion distribution and the impact of ion distribution on electrodeposition morphology through electrochemical model simulation calculation, in situ observation and electrochemical experiment: 1) high concentration will reduce the concentration polarization and the overpotential; 2) The passage of active ions through channels are facilitated by small anion (Cl-) rather than bigger one (SO4 2-), which means small deposition overpotential; 3) The transportability-reaction properties of cations (Zn2+, Li+, Na+ and H+) depends on their concentration, solvent coordination structure, and the energy changes during redox reactions. Based on the diffusion and reaction properties, a Li+ coupled Zn2+ electrolyte is designed to achieve the rapid transportation of doped ions to cover uneven growth sites and maintain a stable interface for the steady deposition of active Zn2+, guiding the interface design for high stability metal batteries in addition to the traditional addition of organic solvents.

Modulation of Electron Push-Pull by Redox Non-Innocent Additives for Long Cycle Life Zinc Anode.

Application of an aqueous Zn-ion battery is plagued by a water-induced hydrogen evolution reaction (HER), resulting in local pH variations and an unstable electrode-electrolyte interface (EEI) with uncontrolled Zn plating and side reactions. Here, 4-methyl pyridine N-oxide (PNO) is introduced as a redox non-innocent additive that comprises a hydrophilic bipolar N+-O- ion pair as a coordinating ligand for Zn and a hydrophobic ─CH3 group at the para position of the pyridine ring that reduces water activity at the EEI, thereby enhancing stability. The N+-O- moiety of PNO possesses the unique functionality of an efficient push electron donor and pull electron acceptor, thus maintaining the desired pH during charging/discharging. Intriguingly, replacing ─CH3 (electron pushing +I effect) by ─CF3 group (electron pulling ─I effect), however, does not improve the reversibility; instead, it degrades the cell performance. The electrolyte with 2 m ZnSO4 + 15 mm PNO enables symmetric cell Zn plating/stripping for a remarkable > 10 000 h at 0.5 mA cm-2 and exhibits coulombic efficiency (CE) ≈99.61% at 0.8 mA cm-2 in Zn/Cu asymmetric cell. This work showcases the immense interplay of the electron push-pull of the additives on the cycling.

Elucidating High Initial Coulombic Efficiency, Pseudocapacitive Kinetics and Charge Storage Mechanism of Antiperovskite Carbide Ni3ZnC0.7@rGO Anode for Fast Sodium Storage in Ether Electrolyte.

To explore novel electrode materials with in-depth elucidation of initial coulombic efficiency (ICE), kinetics, and charge storage mechanisms is of great challenge for Na-ion storage. Herein, a novel 3D antiperovskite carbide Ni3ZnC0.7@rGO anode coupled with ether-based electrolyte is reported for fast Na-ion storage, exhibiting superior performance than ester-based electrolyte. Electrochemical tests and density functional theory (DFT) calculations show that Ni3ZnC0.7@rGO anode with ether-based electrolyte can promote charge/ion transport and lower Na+ diffusion energy barrier, thereby improving ICE, reversible capacity, rate, and cycling performance. Cross-sectional-morphology and depth profiling surface chemistry demonstrate that not only a thinner and more homogeneous reaction interface layer with less side effects but also a superior solid electrolyte interface (SEI) film with a high proportion of inorganic components are formed in the ether-based electrolyte, which accelerates Na+ transport and is the significant reason for the improvement of ICE and other electrochemical properties. Meanwhile, electrochemical and ex situ measurements have revealed conversion, alloying, and co-intercalation hybrid mechanisms of the Ni3ZnC0.7@rGO anode based on ether electrolyte. Interestingly, the Na-ion capacitors (SICs) designed by pairing with activated carbon (AC) cathode exhibit favorable electrochemical performance. Overall, this work provides deep insights on developing advanced materials for fast Na-ion storage.

A Universal Approach for Sustainable Urea Synthesis via Intermediate Assembly at the Electrode/Electrolyte Interface.

Electrocatalytic C-N coupling process is indeed a sustainable alternative for direct urea synthesis and co-upgrading of carbon dioxide and nitrate wastes. However, the main challenge lies in the unactivated C-N coupling process. Here, we proposed a strategy of intermediate assembly with alkali metal cations to activate C-N coupling at the electrode/electrolyte interface. Urea synthesis activity follows the trend of Li+

Surfactant Directionally Assembled at the Electrode-Electrolyte Interface for Facilitating Electrocatalytic Aldehyde Hydrogenation.

Electrocatalytic hydrogenation of unsaturated aldehydes to unsaturated alcohols is a promising alternative to conventional thermal processes. Both the catalyst and electrolyte deeply impact the performance. Designing the electrode-electrolyte interface remains challenging due to its compositional and structural complexity. Here, we employ the electrocatalytic hydrogenation of 5-hydroxymethylfurfural (HMF) as a reaction model. The typical cationic surfactant, cetyltrimethylammonium bromide (CTAB), and its analogs are employed as electrolyte additives to tune the interfacial microenvironment, delivering high-efficiency hydrogenation of HMF and inhibition of the hydrogen evolution reaction (HER). The surfactants experience a conformational transformation from stochastic distribution to directional assembly under applied potential. This oriented arrangement hampers the transfer of water molecules to the interface and promotes the enrichment of reactants. In addition, near 100 % 2,5-bis(hydroxymethyl)furan (BHMF) selectivity is achieved, and the faradaic efficiency (FE) of the BHMF is improved from 61 % to 74 % at -100 mA cm-2. Notably, the microenvironmental modulation strategy applies to a range of electrocatalytic hydrogenation reactions involving aldehyde substrates. This work paves the way for engineering advanced electrode-electrolyte interfaces and boosting unsaturated alcohol electrosynthesis efficiency.

In-Situ Spontaneous Electropolymerization Enables Robust Hydrogel Electrolyte Interfaces in Aqueous Batteries.

Hydrogels hold great promise as electrolytes for emerging aqueous batteries, for which establishing a robust electrode-hydrogel interface is crucial for mitigating side reactions. Conventional hydrogel electrolytes fabricated by ex situ polymerization through either thermal stimulation or photo exposure cannot ensure complete interfacial contact with electrodes. Herein, we introduce an in situ electropolymerization approach for constructing hydrogel electrolytes. The hydrogel is spontaneously generated during the initial cycling of the battery, eliminating the need of additional initiators for polymerization. The involvement of electrodes during the hydrogel synthesis yields well-bonded and deep infiltrated electrode-electrolyte interfaces. As a case study, we attest that, the in situ-formed polyanionic hydrogel in Zn-MnO2 battery substantially improves the stability and kinetics of both Zn anode and porous MnO2 cathode owing to the robust interfaces. This research provides insight to the function of hydrogel electrolyte interfaces and constitutes a critical advancement in designing highly durable aqueous batteries.

Polyelectrolyte Additive-Modulated Interfacial Microenvironment Boosting CO2 Electrolysis in Acid.

Acidic CO2 electrolysis offers a promising strategy to achieve high carbon utilization and high energy efficiency. However, challenges remain in suppressing the competitive hydrogen evolution reaction (HER) and improving product selectivity. High concentrations of potassium ions (K+) can suppress HER and accelerate CO2 reduction, but they still inevitably suffer from salt precipitation problems. In this study, we demonstrate that the sulfonate-based polyelectrolyte, polystyrene sulfonate (PSS), enables to reconstruct the electrode-electrolyte interface to significantly enhance the acidic CO2 electrolysis. Mechanistic studies reveal that PSS induces high local K+ concentrations through electrostatic interaction between PSS anions and K+. In situ spectroscopy reveals that PSS reshapes the interfacial hydrogen-bond (H-bond) network, which is attributed to the H-bonds between PSS anions and hydrated proton as well as the steric hindrance of the additive molecules. This greatly weakens proton transfer kinetics and leads to the suppression of undesirable HER. As a result, a Faradaic efficiency of 93.9% for CO can be achieved at 250 mA cm-2, simultaneous with a high single-pass carbon efficiency of 72.2% on commercial Ag catalysts in acid. This study highlights the important role of the electrode-electrolyte interface induced by polyelectrolyte additives in promoting electrocatalytic reactions.

Hydrogen-Bonded Organic Frameworks-based Electrolytes with Controllable Hydrogen Bonding Networks for Solid-State Lithium Batteries.

The lack of stable solid-state electrolytes (SSEs) with high-ionic conductivity and rational design of electrode/electrolyte interfaces remains challenging for solid-state lithium batteries. Here, for the first time, a high-performance solid-state lithium-oxygen battery is developed based on the Li-ion-conducted hydrogen-bonded organic framework (LHOF) electrolyte and the core-shell HOF-DAT@CNT cathode with a few layers of HOF-DAT on surface of carbon nanotubes. Benefiting from the abundant dynamic hydrogen bonding network in LHOF-DAT SSEs, fast Li+ ion transport (2.2 × 10-4 S cm-1), a high Li+ transfer number (0.88), and a wide electrochemical window of 5.05 V are achieved. Symmetric batteries constructed with LHOF-DAT SSEs exhibit a stably cycled duration of over 1400 h, which mainly stems from the jumping sites that promote a uniformly high rate of Li+ flux and the hydrogen-bonding network structure that can relieve the structural changes during Li+ transport. LHOF-DAT SSEs-based Li-O2 batteries exhibit high specific capacity (10335 mAh g-1), and stable cycling life up to 150 cycles. Moreover, the solid-state lithium metal battery with LHOF-DAT SSEs endow good rate capability (128.8 mAh g-1 at 1 C), long-term discharge/charge stability (210 cycles). The design of LHOF-DAT SSEs opens an avenue for the development of novel SSEs-based solid-state lithium batteries.

Electrochemical Imaging of Precisely-Defined Redox and Reactive Interfaces.

Understanding the diverse electrochemical reactions occurring at electrode-electrolyte interfaces (EEIs) is a critical challenge to developing more efficient energy conversion and storage technologies. Establishing a predictive molecular-level understanding of solid electrolyte interphases (SEIs) is challenging due to the presence of multiple intertwined chemical and electrochemical processes occurring at battery electrodes. Similarly, chemical conversions in reactive electrochemical systems are often influenced by the heterogeneous distribution of active sites, surface defects, and catalyst particle sizes. In this mini review, we highlight an emerging field of interfacial science that isolates the impact of specific chemical species by preparing precisely-defined EEIs and visualizing the reactivity of their individual components using single-entity characterization techniques. We highlight the broad applicability and versatility of these methods, along with current state-of-the-art instrumentation and future opportunities for these approaches to address key scientific challenges related to batteries, chemical separations, and fuel cells. We establish that controlled preparation of well-defined electrodes combined with single entity characterization will be crucial to filling key knowledge gaps and advancing the theories used to describe and predict chemical and physical processes occurring at EEIs and accelerating new materials discovery for energy applications.

Thermally Healable Electrolyte-Electrode Interface for Sustainable Quasi-Solid Zinc-ion Batteries.

Quasi-solid zinc-ion batteries using hydrogel electrolytes show great potential in energy storage devices owing to their intrinsic safety, fewer side reactions and wide electrochemical windows. However, the dendrite issues on the zinc anodes cannot be fundamentally eliminated and the intrinsic anode-electrolyte interfacial interspace is rarely investigated. Here, we design a dynamically healable gelatin-based hydrogel electrolyte with a highly reversible sol-gel transition, which can construct a conformal electrode-electrolyte interface and further evolve into a stable solid-solid interface by in situ solidification. The unique helical gelatin chain structure provides a uniform channel for zinc ion transport by the bridging effect of sulfate groups. As a consequence, the dynamically healable interface enables dendrite-free zinc anodes and repeatedly repairs the anode-electrolyte interfacial interspaces by the reversible sol-gel transition of gelatin electrolyte to retain long-lasting protection for sustainable zinc-ion batteries.

Ameliorating Phosphonic-Based Nonflammable Electrolytes Towards Safe and Stable Lithium Metal Batteries.

High-energy-density lithium metal batteries with high safety and stability are urgently needed. Designing the novel nonflammable electrolytes possessing superior interface compatibility and stability is critical to achieve the stable cycling of battery. Herein, the functional additive dimethyl allyl-phosphate and fluoroethylene carbonate were introduced to triethyl phosphate electrolytes to stabilize the deposition of metallic lithium and accommodate the electrode-electrolyte interface. In comparison with traditional carbonate electrolyte, the designed electrolyte shows high thermostability and inflaming retarding characteristics. Meanwhile, the Li||Li symmetrical batteries with designed phosphonic-based electrolytes exhibit a superior cycling stability of 700 h at the condition of 0.2 mA cm-2, 0.2 mAh cm-2. Additionally, the smooth- and dense-deposited morphology was observed on an cycled Li anode surface, demonstrating that the designed electrolytes show better interface compatibility with metallic lithium anodes. The Li||LiNi0.8Co0.1Mn0.1O2 and Li||LiNi0.6Co0.2Mn0.2O2 batteries paired with phosphonic-based electrolytes show better cycling stability after 200 and 450 cycles at the rate of 0.2 C, respectively. Our work provides a new way to ameliorate nonflammable electrolytes in advanced energy storage systems.

NH4 + Deprotonation at Interfaces Induced Reversible H3 O+ /NH4 + Co-insertion/Extraction.

Ion insertions always involve electrode-electrolyte interface process, desolvation for instance, which determines the electrochemical kinetics. However, it's still a challenge to achieve fast ion insertion and investigate ion transformation at interface. Herein, the interface deprotonation of NH4 + and the introduced dissociation of H2 O molecules to provide sufficient H3 O+ to insert into materials' structure for fast energy storages are revealed. Lewis acidic ion-NH4 + can, on one hand provide H3 O+ itself via deprotonation, and on the other hand hydrolyze with H2 O molecules to produce H3 O+ . In situ attenuated total reflection-Fourier transform infrared ray method probed the interface accumulation and deprotonation of NH4 + , and density functional theory calculations manifested that NH4 + tend to thermodynamically adsorb on the surface of monoclinic VO2 , and deprotonate to provide H3 O+ . In addition, the inserted NH4 + has a positive effect for stabilizing the VO2 (B) structure. Therefore, high specific capacity (>300 mAh g-1 ) and fast ionic insertion/extraction (<20 s) can be realized in VO2 (B) anode. This interface derivation proposes a new path for designing proton ion insertion/extraction in mild electrolyte.

Dynamically Resettable Electrode-Electrolyte Interface through Supramolecular Sol-Gel Transition Electrolyte for Flexible Zinc Batteries.

Flexible batteries based on gel electrolytes with high safety are promising power solutions for wearable electronics but suffer from vulnerable electrode-electrolyte interfaces especially upon complex deformations, leading to irreversible capacity loss or even battery collapse. Here, a supramolecular sol-gel transition electrolyte (SGTE) that can dynamically accommodate deformations and repair electrode-electrolyte interfaces through its controllable rewetting at low temperatures is designed. Mediated by the micellization of polypropylene oxide blocks in Pluronic and host-guest interactions between α-cyclodextrin (α-CD) and polyethylene oxide blocks, the high ionic conductivity and compatibility with various salts of SGTE afford resettable electrode-electrolyte interfaces and thus constructions of a series of highly durable, flexible aqueous zinc batteries. The design of this novel gel electrolyte provides new insights for the development of flexible batteries.

Sulfur-Rich Additive-Induced Interphases Enable Highly Stable 4.6†V LiNi0.5 Co0.2 Mn0.3 O2 ||graphite Pouch Cells.

High-voltage lithium-ion batteries (LIBs) have attracted great attention due to their promising high energy density. However, severe capacity degradation is witnessed, which originated from the incompatible and unstable electrolyte-electrode interphase at high voltage. Herein, a robust additive-induced sulfur-rich interphase is constructed by introducing an additive with ultrahigh S-content (34.04 %, methylene methyl disulfonate, MMDS) in 4.6 V LiNi0.5 Co0.2 Mn0.3 O2 (NCM523)||graphite pouch cell. The MMDS does not directly participate the inner Li+ sheath, but the strong interactions between MMDS and PF6 - anions promote the preferential decomposition of MMDS and broaden the oxidation stability, facilitating the formation of an ultrathin but robust sulfur-rich interfacial layer. The electrolyte consumption, gas production, phase transformation and dissolution of transition metal ions were effectively inhibited. As expected, the 4.6 V NCM523||graphite pouch cell delivers a high capacity retention of 87.99 % even after 800 cycles. This work shares new insight into the sulfur-rich additive-induced electrolyte-electrode interphase for stable high-voltage LIBs.

Boosting Hydrogen Peroxide Electrosynthesis via Modulating the Interfacial Hydrogen-Bond Environment.

Designing highly efficient and stable electrode-electrolyte interface for hydrogen peroxide (H2 O2 ) electrosynthesis remains challenging. Inhibiting the competitive side reaction, 4 e- oxygen reduction to H2 O, is essential for highly selective H2 O2 electrosynthesis. Instead of hindering excessive hydrogenation of H2 O2 via catalyst modification, we discover that adding a hydrogen-bond acceptor, dimethyl sulfoxide (DMSO), to the KOH electrolyte enables simultaneous improvement of the selectivity and activity of H2 O2 electrosynthesis. Spectral characterization and molecular simulation confirm that the formation of hydrogen bonds between DMSO and water molecules at the electrode-electrolyte interface can reduce the activity of water dissociation into active H* species. The suitable H* supply environment hinders excessive hydrogenation of the oxygen reduction reaction (ORR), thus improving the selectivity of 2 e- ORR and achieving over 90 % selectivity of H2 O2 . This work highlights the importance of regulating the interfacial hydrogen-bond environment by organic molecules as a means of boosting electrochemical performance in aqueous electrosynthesis and beyond.

Electrode-Electrolyte Interfacial Chemistry Modulation for Ultra-High Rate Sodium-Ion Batteries.

Sodium-ion batteries capable of operating at rate and temperature extremes are highly desirable, but elusive due to the dynamics and thermodynamics limitations. Herein, a strategy of electrode-electrolyte interfacial chemistry modulation is proposed. The commercial hard carbon demonstrates superior rate performance with 212 mAh g-1 at an ultra-high current density of 5 A g-1 in the electrolyte with weak ion solvation/desolvation, which is much higher than those in common electrolytes (nearly no capacity in carbonate-based electrolytes). Even at -20 °C, a high capacity of 175 mAh g-1 (74 % of its room-temperature capacity) can be maintained at 2 A g-1 . Such an electrode retains 90 % of its initial capacity after 1000 cycles. As proven, weak ion solvation/desolvation of tetrahydrofuran greatly facilitates fast-ion diffusion at the SEI/electrolyte interface and homogeneous SEI with well-distributed NaF and organic components ensures fast Na+ diffusion through the SEI layer and a stable interface.

Electrochemical Characterization of Single Layer Graphene/Electrolyte Interface: Effect of Solvent on the Interfacial Capacitance.

The development of the basic understanding of the charge storage mechanisms in electrodes for energy storage applications needs deep characterization of the electrode/electrolyte interface. In this work, we studied the charge of the double layer capacitance at single layer graphene (SLG) electrode used as a model material, in neat (EMIm-TFSI) and solvated (with acetonitrile) ionic liquid electrodes. The combination of electrochemical impedance spectroscopy and gravimetric electrochemical quartz crystal microbalance (EQCM) measurements evidence that the presence of solvent drastically increases the charge carrier density at the SLG/ionic liquid interface. The capacitance is thus governed not only by the electronic properties of the graphene, but also by the specific organization of the electrolyte side at the SLG surface originating from the strong interactions existing between the EMIm+ cations and SLG surface. EQCM measurements also show that the carbon structure, with the presence of sp2 carbons, affects the charge storage mechanism by favoring counter-ion adsorption on SLG electrode versus ion exchange mechanism in amorphous porous carbons.