An insect-inspired asymmetric hinge in a double-layer membrane.

Insect wings are deformable airfoils, in which deformations are mostly achieved by complicated interactions between their structural components. Due to the complexity of the wing design and technical challenges associated with testing the delicate wings, we know little about the properties of their components and how they determine wing response to flight forces. Here, we report an unusual structure from the hind-wing membrane of the beetle Pachnoda marginata. The structure, a transverse section of the claval flexion line, consists of two distinguishable layers: a bell-shaped upper layer and a straight lower layer. Our computational simulations showed that this is an effective one-way hinge, which is stiff in tension and upward bending but flexible in compression and downward bending. By systematically varying its design parameters in a computational model, we showed that the properties of the double-layer membrane hinge can be tuned over a wide range. This enabled us to develop a broad design space, which we later used for model selection. We used selected models in three distinct applications, which proved that the double-layer hinge represents a simple yet effective design strategy for controlling the mechanical response of structures using a single material and with no extra mass. The insect-inspired, one-way hinge is particularly useful for developing structures with asymmetric behavior, exhibiting different responses to the same load in two opposite directions. This multidisciplinary study not only advances our understanding of the biomechanics of complicated insect wings but also informs the design of easily tunable engineering hinges.

Cerebellar Transcranial Direct Current Stimulation Modulates Anticipatory Postural Adjustments in Healthy Adults.

During forward swinging of the arm, the central nervous system must anticipate the effect of upraising upon the body. Little is known about the cerebellar network that coordinates these anticipatory postural adjustments (APAs). Stimulating different cerebellar regions with transcranial direct current stimulation (tDCS) and with different polarities modulated the APAs. We used surface electromyography (sEMG) to measure muscle activities in a bilateral rapid shoulder flexion task. The onset of APAs was altered after tDCS over the vermis, while the postural stability and the kinematics of arm raising were not affected. To our knowledge, this is the first human cerebellar-tDCS (c-tDCS) study to separate cerebellar involvement in core muscle APAs in bilateral rapid shoulder flexion. These data contribute to our understanding of the cerebellar network supporting APAs in healthy adults. Modulated APAs of the erector spinae by tDCS on the vermis may be related to altered cerebellar brain inhibition (CBI), suggesting the importance of the vermal-cerebral connections in APAs regulation.

Non-surgical correction of knee flexion deformity in persons with haemophilia: A staged multidisciplinary approach.

INTRODUCTION: Flexion deformity of the knee is a common complication following recurrent haemarthrosis in persons with haemophilia (PWH) on episodic factor replacement therapy, restricting independent mobility. There is limited literature on the comprehensive management of this condition. This report provides the outcome of a staged multidisciplinary approach for the correction of knee flexion deformity (KFD) even in limited resource settings. PATIENTS AND METHODS: The data of 49 consecutive PWH who were treated for KFD were analysed. The approach included graded physical therapy (PT), followed by serial casting and/or mobilisation under anaesthesia (MUA). MUA was done in carefully selected knees. Surgical correction was opted when non-surgical methods failed. RESULTS: Of the 49 patients (55 knees), with a median KFD of 40 degrees (range: 10-90), 26/55 (47%) were corrected by graded PT. With serial casting, 9/19 (47%) knees had their KFD corrected. MUA was done for 11 knees of which five achieved correction (45%). Surgical correction was required for only seven knees (12.7%). Following this approach, KFD improved from 40 degrees (range: 10-90) to 15 degrees (range: 0-40), with only minor loss of flexion from 105 (range: 60-155) to 90 degrees (range: 30-150). Out of 55 KFD, 46 (83.6%) KFD were corrected; non-surgical, 39 (70.9%) and surgery, seven (12.7%). The remaining patients (nine KFD; 16.4%) were able to achieve their functional goal despite not meeting the correction criteria. CONCLUSION: This study shows that in PWH, functionally significant KFD correction can be achieved in about 71%, through non-surgical methods, even without prophylactic factor replacement.

Fatigue Test Method to Evaluate the 50 Year Durability of Venous Stents.

OBJECTIVE: Iliofemoral venous obstructive disease can result in significant, potentially debilitating symptoms that can negatively affect quality of life. Unlike arterial disease, patients with deep venous disease have a significantly lower median age, therefore the need for long term stent patency becomes a matter of decades rather than years. Furthermore, iliofemoral lesions frequently require stent placement across the inguinal ligament. Such stents are subject to dynamic stress from leg movement and associated concerns for device fatigue, resulting in stent fracture. The aim of this study was to describe an in vitro 50 year stent fatigue test method designed to assess durability against dynamic stress induced device fracture. METHODS: Through literature review, cadaver studies, and computer modelling, the most challenging loading was confirmed to be hip flexion across the inguinal ligament. This occurs when the patient adjusts between a seated and standing position. Sit to stand hip flexion at the inguinal ligament was effectively simulated on the bench in this in vitro experimental study. RESULTS: When tested under challenge parameters, hip flexion was reliably found to cause fractures in non-venous nitinol stents. However, a dedicated self expanding nitinol venous stent, engineered for improved durability, underwent up to 50 years of simulated loading on the bench with 15% (3/20) of stents experiencing fractures at 50 years, compared with fractures in 35% (14/40) of non-venous stents tested to 1.4 years; no statistical testing was performed as durations do not match and the objective was to demonstrate the test method. CONCLUSION: The presented fatigue test method is a suitable approach for evaluating the durability of stents intended for venous use. Venous stents demonstrated superior fatigue resistance compared with non-venous stents via in vitro hip flexion testing.

Deformed Popliteal Artery Due to Highly Flexed Knee Position Can Cause Kinks, Creating an Unfavorable Hemodynamic State.

BACKGROUND: Endovascular treatment devices of the femoropopliteal artery have evolved, improving clinical results. However, the effects of dynamic changes in the popliteal artery during knee flexion have not been sufficiently investigated. In this study we performed a 3-dimensional analysis to clarify the dynamic changes in the popliteal artery during knee flexion and their effects on hemodynamics.Methods and Results: To analyze dynamic changes in the popliteal artery in the knee flexion position, a computed tomography protocol was developed in the right-angled and maximum flexion knee positions. Thirty patients with lower extremity artery disease were recruited. V-Modeler software was used for anatomical and hemodynamic analyses. Various types of deformations of the popliteal artery were revealed, including hinge points and accessory flexions. Kinks can occur in the maximum flexion position; however, they rarely occur in the right-angled flexion position. In addition, hemodynamic analysis revealed a tendency for lower minimum wall shear stress and a higher maximum oscillatory shear index at the maximum curvature of the popliteal artery. CONCLUSIONS: Kinks in the maximum flexion position suggested that the outcome of endovascular treatment may change in areas such as Japan, where knee flexion is customary. Hemodynamics at the maximum curvature of the popliteal artery indicated that the luminal condition was unfavorable for endovascular treatment.

Prediction of persistent occiput posterior position by sonographic assessment of fetal head attitude at start of second stage of labor: prospective study.

OBJECTIVES: To evaluate the relationship between the attitude of the fetal head quantified by means of the chin-to-chest angle (CCA) in fetuses in occiput posterior (OP) position at the beginning of the second stage of labor, and persistent OP position at birth. METHODS: This was a single-center, prospective observational study conducted at the University Hospital of Parma, Parma, Italy. We included singleton pregnancies at term with fetuses in the OP position at the beginning of the second stage of labor. The fetal head position, station by means of angle of progression and head-to-perineum distance, and attitude by means of CCA were assessed using transabdominal or transperineal ultrasound. The primary outcome was persistent OP position at birth. RESULTS: Between January and July 2022, 76 women were included in the study. There were 48 (63.2%) spontaneous rotations of the fetal head and spontaneous vaginal delivery occurred in all. Among the 28 (36.8%) fetuses that did not rotate spontaneously into an occiput anterior position, eight (28.6%) had a spontaneous vaginal delivery, while operative vaginal delivery and Cesarean delivery was performed in 11 (39.3%) and nine (32.1%) cases, respectively. Multivariable logistic regression analysis showed that the CCA (adjusted odds ratio (aOR), 2.15 (95% CI, 1.22-3.78); P = 0.008) and nulliparity (aOR, 0.20 (95% CI, 0.06-0.76); P = 0.02) were associated independently with persistent OP position at birth. Moreover, the CCA showed an area under the receiver-operating-characteristics curve of 0.69 (95% CI, 0.56-0.82); P = 0.005) for the prediction of persistent OP position. The optimal cut-off value of the CCA was 36.5°, and was associated with a sensitivity of 0.82 (95% CI, 0.63-0.94), specificity of 0.50 (95% CI, 0.35-0.65), positive predictive value of 0.49 (95% CI, 0.34-0.64), negative predictive value of 0.83 (95% CI, 0.64-0.94), positive likelihood ratio of 1.64 (95% CI, 1.18-2.29) and negative likelihood ratio of 0.36 (95% CI, 0.15-0.83). CONCLUSIONS: Our data show that, within a population of women with fetal OP position at the beginning of the second stage of labor, the sonographic fetal head attitude measured by means of the CCA might help in the identification of fetuses at risk of persistent OP position. Such findings can be useful for patient counseling when OP position is diagnosed at full cervical dilatation. Further studies should investigate if the CCA might select patients who may benefit from manual rotation of the fetal head. © 2023 The Authors. Ultrasound in Obstetrics & Gynecology published by John Wiley & Sons Ltd on behalf of International Society of Ultrasound in Obstetrics and Gynecology.

The Influence of Sports-Related Concussion on Cognition and Landing Biomechanics in Collegiate Athletes.

Injury surveillance data indicate that collegiate athletes are at greater risk for lower extremity (LE) injuries following sports-related concussion (SRC). While the association between SRC and LE injury appears to be clinically relevant up to 1-year post-SRC, little evidence has been provided to determine possible mechanistic rationales. Thus, we aimed to compare collegiate athletes with a history of SRC to matched controls on biomechanical and cognitive performance measures associated with LE injury risk. Athletes with a history of SRC (n = 20) and matched controls (n = 20) performed unanticipated bilateral land-and-cut tasks and cognitive assessments. Group-based analyses (ANOVA) and predictive modeling (C5.0 decision tree algorithm) were used to compare group differences on biomechanical and cognitive measures. Collegiate athletes with a history of SRC demonstrated approximately six degrees less peak knee flexion on both dominant (p = 0.03, d = 0.71) and nondominant (p = 0.02, d = 0.78) limbs during the land-and-cut tasks compared to controls. Verbal Memory, knee flexion, and Go/No Go total score (C5.0 decision tree algorithm) were identified as the strongest indicators of previous SRC injury history. Reduced knee flexion during sport-specific land-and-cut tasks may be a mechanism for increased LE injury risk in athletes with a history of SRC. There appears to be multiple biomechanical and cognitive predictors for identifying previous SRC in collegiate athletes, providing evidence to support a multifactorial SRC management strategy to reduce future injury risk.

Motoneuron persistent inward current contribution to increased torque responses to wide-pulse high-frequency neuromuscular electrical stimulation.

PURPOSE: To assess the effect of a remote handgrip contraction during wide-pulse high-frequency (WPHF) neuromuscular electrical stimulation (NMES) on the magnitude of extra torque, progressive increase in torque during stimulation, and estimates of the persistent inward current (PIC) contribution to motoneuron firing in the plantar flexors. METHODS: Ten participants performed triangular shaped contractions to 20% of maximal plantar flexion torque before and after WPHF NMES with and without a handgrip contraction, and control conditions. Extra torque, the relative difference between the initial and final torque during stimulation, and sustained electromyographic (EMG) activity were assessed. High-density EMG was recorded during triangular shaped contractions to calculate ∆F, an estimate of PIC contribution to motoneuron firing, and its variation before vs after the intervention referred to as ∆F change score. RESULTS: While extra torque was not significantly increased with remote contraction (WPHF + remote) vs WPHF (+ 37 ± 63%, p = 0.112), sustained EMG activity was higher in this condition than WPHF (+ 3.9 ± 4.3% MVC EMG, p = 0.017). Moreover, ∆F was greater (+ 0.35 ± 0.30 Hz) with WPHF + remote than control (+ 0.03 ± 0.1 Hz, p = 0.028). A positive correlation was found between ∆F change score and extra torque in the WPHF + remote (r = 0.862, p = 0.006). DISCUSSION: The findings suggest that the addition of remote muscle contraction to WPHF NMES enhances the central contribution to torque production, which may be related to an increased PIC contribution to motoneuron firing. Gaining a better understanding of these mechanisms should enable NMES intervention optimization in clinical and rehabilitation settings, improving neuromuscular function in clinical populations.

Association of the rate of torque development and joint angle with passive muscle stiffness.

PURPOSE: The purpose of this study was to statistically compare the rate of torque development normalized by maximal strength (relative RTD) across ankle angles. Additionally, this study was aimed at exploring the correlation coefficients between relative RTD and passive stiffness of the medial gastrocnemius (MG) at different ankle angles. METHODS: Twenty-two healthy men and women (age: 31 ± 4 years) performed randomly-ordered explosive isometric plantar flexions at plantarflexed (15°), neutral (0°), and dorsiflexed (- 15°) angles; relative RTD comprised the slope of the time-torque curve normalized to maximal torque. The shear wave velocity (SWV; index of stiffness) of the MG at rest was measured at each angle using ultrasound shear wave elastography. RESULTS: The relative RTD was greater at 15° than - 15° for 0-50, 0-100, and 0-150 ms time-windows and at 15° than 0° for the 0-150 ms time-window (P < 0.05), although peak torque was lower at 15° than 0° and - 15° (P < 0.05). The relative RTD for the 0-50 ms time-window correlated with SWV at - 15° (rs = 0.475, P < 0.05), but not at 15º and 0º. Furthermore, the correlation coefficient of RTD for the 0-100 ms time-window with SWV was significantly greater at - 15° (rs = 0.420) than 0 ° (rs = - 0.109). CONCLUSIONS: A greater relative RTD occurs at plantarflexed angles (i.e., the ascending limb of the force-length curve) in the triceps surae, and relative RTD is strongly related to passive MG stiffness at dorsiflexed angles (i.e., longer muscle lengths).

Analysis of Variation in Sagittal Curvature of the Femoral Condyles.

In designing femoral components, which restore native (i.e., healthy) knee kinematics, the flexion-extension (F-E) axis of the tibiofemoral joint should match that of the native knee. Because the F-E axis is governed by the curvature of the femoral condyles in the sagittal plane, the primary objective was to determine the variation in radii of curvature. Eleven high accuracy three-dimensional (3D) femur models were generated from ultrahigh resolution CT scans. The sagittal profile of each condyle was created. The radii of curvature at 15 deg increments of arc length were determined based on segment circles best-fit to ±15 deg of arc at each increment. Results were standardized to the radius of the best-fit overall circle to 15 deg-105 deg for the femoral condyle having a radius closest to the mean radius. Medial and lateral femoral condyles exhibited multiradius of curvature sagittal profiles where the radius decreased at 30 deg flexion by 10 mm and at 15 deg flexion by 8 mm, respectively. On either side of the decrease, radii of segment circles were relatively constant. Beyond the transition angles where the radii decreased, the anterior-posterior (A-P) positions of the centers of curvature varied 4.8 mm and 2.3 mm for the medial and lateral condyles, respectively. A two-radius of curvature profile approximates the radii of curvature of both native femoral condyles, but the transition angles differ with the transition angle of the medial femoral condyle occurring about 15 deg later in flexion. Owing to variation in A-P positions of centers of curvature, the F-E axis is not strictly fixed in the femur.

Critical Examination of Methods to Determine Tibiofemoral Kinematics and Tibial Contact Kinematics Based on Analysis of Fluoroscopic Images.

Goals of knee replacement surgery are to restore function and maximize implant longevity. To determine how well these goals are satisfied, tibial femoral kinematics and tibial contact kinematics are of interest. Tibiofemoral kinematics, which characterize function, is movement between the tibia and femur whereas tibial contact kinematics, which is relevant to implant wear, is movement of the location of contact by the femoral implant on the tibial articular surface. The purposes of this review article are to describe and critique relevant methods to guide correct implementation. For tibiofemoral kinematics, methods are categorized as those which determine (1) relative planar motions and (2) relative three-dimensional (3D) motions. Planar motions are determined by first finding anterior-posterior (A-P) positions of each femoral condyle relative to the tibia and tracking these positions during flexion. Of the lowest point (LP) and flexion facet center (FFC) methods, which are common, the lowest point method is preferred and the reasoning is explained. 3D motions are determined using the joint coordinate system (JCS) of Grood and Suntay. Previous applications of this JCS have resulted in motions which are largely in error due to "kinematic crosstalk." Requirements for minimizing kinematic crosstalk are outlined followed by an example, which demonstrates the method for identifying a JCS that minimizes kinematic crosstalk. Although kinematic crosstalk can be minimized, the need for a JCS to determine 3D motions is questionable based on anatomical constraints, which limit varus-valgus rotation and compression-distraction translation. Methods for analyzing tibial contact kinematics are summarized and validation of methods discussed.

Is the disappearance of the cervical flexion-relaxation phenomenon associated with cervical degeneration in healthy people?

PURPOSE: This study aims to explore the differences in cervical degeneration between healthy people with and without cervical flexion-relaxation phenomenon (FRP) and to identify whether the disappearance of cervical FRP is related to cervical degeneration. METHODS: According to the flexion relaxation ratio (FRR), healthy subjects were divided into the normal FRP group and the abnormal FRP group. Besides, MRI was used to evaluate the degeneration of the passive subsystem (vertebral body, intervertebral disc, cervical sagittal balance, etc.) and the active subsystem (deep flexors [DEs], deep extensors [DFs], and superficial extensors [SEs]). In addition, the correlation of the FRR with the cervical degeneration score, C2-7Cobb, Borden method, relative total cross-sectional area (rTCSA), relative functional cross-sectional area (rFCSA), and fatty infiltration ratio (FIR) was analyzed. RESULTS: A total of 128 healthy subjects were divided into the normal FRP group (n=52, 40.63%) and the abnormal FRP group (n=76, 59.38%). There were significant differences between the normal FRP group and the abnormal FRP group in the cervical degeneration score (z=-6.819, P<0.001), C2-7Cobb (t=2.994, P=0.004), Borden method (t=2.811, P=0.006), and FIR of DEs (t=-4.322, P<0.001). The FRR was significantly correlated with the cervical degeneration score (r=-0.457, P<0.001), C2-7Cobb (r=0.228, P=0.010), Borden method (r=0.197, P=0.026), and FIR of DEs (r=-0.253, P=0.004). CONCLUSION: The disappearance of cervical FRP is related to cervical degeneration. A new hypothesis mechanism for FRP is proposed. The cervical FRP test is an effective and noninvasive examination for the differential diagnosis of healthy people, people with potential NSNP, and patients with NSNP.

Changes in the centre of rotation and the anterior bone loss of the vertebral body in Mobi-C artificial disc replacement segments after cervical hybrid surgery: a retrospective study.

OBJECTIVE: To examine the short-term efficacy and imaging results of using the Mobi-C in cervical hybrid surgery on 2-level cervical spondylolisthesis. To observe post-operative changes in the flexion-extension centre of rotation (FE-COR) and anterior bone loss (ABL) of the anterior cervical disc replacement (ACDR) segment. METHODS: Forty-two patients (20 males and 22 females, aged 42‒67 years) who underwent cervical hybrid surgery were retrospectively analysed. Their ACDR segment used Mobi-C, and the fusion segment used ROI-C, with a follow-up of 25‒42 months (31.1 ± 4.8 months). The modified Japanese Orthopaedic Association (mJOA) score, Neck Disability Index (NDI), and visual analogue scale (VAS) were used to assess clinical outcomes. Pre-operative, 6-month post-operative, and final follow-up radiographs were collected to compare total cervical spine curvature (C2-C7), curvature of the operated segments, range of motion (ROM) in the total cervical spine, operated segmental ROM, ACDR segmental ROM, and operated adjacent segmental ROM. The height of the superior articular process (HSAP), the orientation of zygapophyseal joint spaces (OZJS), and the length of the superior articular surface (LSAS) were measured. The FE-COR of the ACDR segment was measured using the mid-plumb line method. The translation distance of the Mobi-C was measured. The degree of disc degeneration in the adjacent segment, bony fusion of the ACDF segment, and ABL of the upper and lower vertebra of the ACDR segment were observed. RESULTS: In our group, all patients have shown improvements in their postoperative mJOA, NDI, and VAS scores. Overall cervical ROM and surgical segmental ROM decreased (P < 0.05). However, there was no significant decrease in ACDR segmental ROM and upper or lower adjacent segmental ROM compared with pre-operatively (P > 0.05). For FE-COR-X, only the last follow-up compared with pre-surgery showed statistical significance (46.74 ± 7.71% vs. 50.74 ± 6.92%, P < 0.05). For FE-COR-Y, the change was statistically significant at both 6 months post-operation and the final follow-up compared to pre-operation (45.37% ± 21.11% vs. 33.82% ± 10.87%, 45. 37% ± 21.11% vs. 27.48% ± 13.58%, P < 0.05). No significant difference in the Mobi-C translation distance was observed (P > 0.05). Moreover, the difference in HSAP was not statistically significant at each node (P > 0.05). The OZJS and LSAS were significantly different at the final follow-up compared to the pre-operative period (P < 0.05). All the ACDF segments were observed in a stable condition at the final follow-up. Furthermore, 9 of the adjacent segments showed imaging ASD (9/82, 10.98%), and all were present at the last follow-up, of which 6 were mild, and 3 were moderate. Twenty of the 42 Mobi-C segments had no significant ABL (grade 0) 6 months post-operatively (47.62%). Sixteen cases (38.10%) showed mild ABL (grade 1), and 6 cases (14.28%) showed moderate ABL (grade 2). No severe ABL occurred. CONCLUSION: The cervical hybrid surgery using Mobi-C artificial cervical discs can achieve satisfactory results. The Mobi-C segmental FE-COR-X shows a slow forward shift trend, and FE-COR-Y drops noticeably within 6 months post-surgery before stabilizing. It's common to see mild to moderate ABL after cervical hybrid surgery using Mobi-C, and significant progression is unlikely in the short term. Furthermore, changes in the FE-COR after hybrid surgery in the Mobi-C segment might not affect clinical outcomes.

Myoelectric interface for neurorehabilitation conditioning to reduce abnormal leg co-activation after stroke: a pilot study.

BACKGROUND: The ability to walk is an important factor in quality of life after stroke. Co-activation of hip adductors and knee extensors has been shown to correlate with gait impairment. We have shown previously that training with a myoelectric interface for neurorehabilitation (MINT) can reduce abnormal muscle co-activation in the arms of stroke survivors. METHODS: Here, we extend MINT conditioning to stroke survivors with leg impairment. The aim of this pilot study was to assess the safety and feasibility of using MINT to reduce abnormal co-activation between hip adductors and knee extensors and assess any effects on gait. Nine stroke survivors with moderate to severe gait impairment received 6 h of MINT conditioning over six sessions, either in the laboratory or at home. RESULTS: MINT participants completed a mean of 159 repetitions per session without any adverse events. Further, participants learned to isolate their muscles effectively, resulting in a mean reduction of co-activation of 70% compared to baseline. Moreover, gait speed increased by a mean of 0.15 m/s, more than the minimum clinically important difference. Knee flexion angle increased substantially, and hip circumduction decreased. CONCLUSION: MINT conditioning is safe, feasible at home, and enables reduction of co-activation in the leg. Further investigation of MINT's potential to improve leg movement and function after stroke is warranted. Abnormal co-activation of hip adductors and knee extensors may contribute to impaired gait after stroke. Trial registration This study was registered at ClinicalTrials.gov (NCT03401762, Registered 15 January 2018, https://clinicaltrials.gov/study/NCT03401762?tab=history&a=4 ).

The reliability, variability and minimal detectable change of multiplanar isometric trunk strength testing using a fixed digital dynamometer.

Trunk strength plays a vital role in athletic performance, rehabilitation and general health, however, current assessment methods are expensive, non-portable or unreliable. This study aimed to investigate the within- and between-session reliability, variability, standard error of measurement and minimal detectable change (MDC) of trunk strength in the sagittal (flexion and extension) and frontal planes (left and right lateral flexion) using a fixed digital dynamometer. Eighteen participants (ten men and eight women) attended two sessions separated by 7 days. Participants were fitted with a trunk harness which was secured to an immovable base via a digital dynamometer. Three maximal voluntary isometric contractions were completed across four positions (prone, supine, left-side recumbent and right-side recumbent, respectively) on a glute-hamstring raise machine. All positions demonstrated excellent reliability and low variability within session (ICC: 0.95-0.98; CV: 5-7%) and between sessions (ICC: 0.98-0.99; CV: 4-6%), across all positions. The between-session MDC ranged from 8% (prone) to 13% (right-side recumbent), translating to absolute values between 2.9 and 3.2 kg across all positions. Maximal isometric force testing using a fixed digital dynamometer provides reliable measurements of multiplanar trunk strength, providing a practical method for use in clinical practice.

The variability in nociceptive flexion reflex threshold measurement is mostly caused by probabilistic effects of the estimation algorithms: a simulation study.

OBJECTIVES: The nociceptive flexion reflex (NFR) and its threshold are frequently used to investigate spinal nociception in humans. Since this threshold (NFRT) is a probabilistic measure, specific algorithms are used for NFRT estimation based on the stochastic occurrence of reflexes at different stimulus intensities. We used a validated simulation model of the NFR to investigate the amount of NFRT measurement variability induced by different estimation algorithms in a steady setting of reduced external influences. METHODS: We simulated the behavior of different estimation algorithms in subjects with an artificially steady baseline NFRT variability (standard deviation: 0 mA) or low baseline NFRT variability (standard deviation: 0.156 mA), equaling a quiet experimental setting. The obtained data were analyzed for NFRT measurement variability caused by the algorithms compared to the baseline variability reflecting other physiological influences. RESULTS: The standard deviation of the NFRT estimated by the different algorithms ranged between 0.381 and 3.464 mA with 96.8% to 99.6% of the measurement variability attributed to the algorithm used. Out of the investigated algorithms the dynamic staircase algorithm was most precise. CONCLUSION: The NFRT measurement variability observed during quiet and steady experimental sessions is mostly caused by the properties of the estimation algorithms, due to the probabilistic nature of the reflex occurrence. Our results give reference for choosing the optimal estimation algorithm to improve measurement precision.

Restricted kinematically aligned total knee arthroplasty with an anatomically designed implant can restore constitutional coronal lower limb alignment.

PURPOSE: Restricted kinematically aligned total knee arthroplasty (rKA-TKA) may not restore the constitutional varus alignment in most patients with knee osteoarthritis. This study aimed to investigate (1) the extent to which constitutional lower limb alignment can be restored by rKA-TKA using an anatomically designed implant and (2) which lower limb alignment parameters are associated with patient-reported outcome measures (PROMs). METHODS: This study included 60 patients who underwent rKA-TKA using an anatomically designed implant. Radiographic alignment parameters, including mechanical lateral distal femoral angle (mLDFA), medial proximal tibial angle (MPTA), coronal hip-knee-ankle angle (HKA), coronal joint line obliquity (JLO), posterior tibial slope (PTS), single-leg standing knee flexion angle (KFA), sagittal JLO, and arithmetic HKA (aHKA), were evaluated preoperatively and postoperatively. The Western Ontario and McMaster Universities Arthritis Index (WOMAC) was used for clinical evaluation. RESULTS: The mLDFA, MPTA, and aHKA showed no significant differences before and after surgery. Coronal HKA and PTS have significantly changed from 8.1 ± 8.7° and 9.9 ± 8.6° preoperatively to 3.5 ± 3.1° and 2.5 ± 2.0° postoperatively, respectively (p < 0.001 for each comparison). The postoperative WOMAC total score was significantly correlated with the KFA (r = 0.4063, p = 0.0034) and sagittal JLO (r = -0.3435, p = 0.0157). Postoperative KFA is a causal factor for the increased postoperative WOMAC total score (r = 1.416, 95% confidence interval: 0.491-2.342, p = 0.003). CONCLUSION: rKA-TKA using an anatomically designed implant can restore constitutional coronal lower limb alignment, while postoperative KFA and sagittal JLO were associated with poor PROMs. Care should be taken for the postoperative KFA because it is a risk factor for poor PROMs. LEVEL OF EVIDENCE: Level III, case-control study.

Gait kinematics and knee stability 10-years following posterior-stabilised total knee arthroplasty comparable to healthy adults >55.

PURPOSE: The purpose of this study was to compare the long-term objective biomechanical and functional parameters of a high-flexion total knee arthroplasty (TKA) design against healthy older adults to determine whether knee biomechanics are comparable in both populations. METHODS: One cohort of patients with a primary TKA, and a cohort of healthy adults over 55 years old with no musculoskeletal deficits or arthritis participated. Bilateral knee range of motion (RoM) was assessed with a goniometer, and gait patterns were analysed with a three-dimensional-motion capture system. An arthrometer quantified the anterior-posterior laxity of each knee. Statistical analyses were performed in SPSS software (α = 0.05). RESULTS: Twenty-three knees were replaced in 20 patients. At 9.8 ± 3.1 years postoperatively, patients' knees had a statistically significantly poorer RoM than healthy controls' knees (n = 23) due to limited flexion; p < 0.0001. Patients also failed to achieve the same degree of knee flexion as controls during downhill gait. No kinematic differences were observed during mid-flexion in level nor downhill gait; a state that has been associated with instability (p = 0.614; not significant [n.s]). There were no differences between groups in knee laxity (n.s). CONCLUSION: Patients in this study had similar gait patterns to healthy older adults during mid-flexion and were no more likely than the healthy controls to exhibit anterior-posterior translation of the knee > 7 mm; a known risk factor of instability. However, the knee flexion range was poorer. This likely led to bilateral pathological knee flexion patterns during downhill gait. LEVEL OF EVIDENCE: Level III.

Change of cervical flexion range of motion influences postoperative sagittal alignment of the cervical spine after laminoplasty.

OBJECTIVE: The relationships between preoperative cervical spine range of motion (ROM) and postoperative cervical sagittal alignment (CSA), and clinical outcomes after laminoplasty (LMP) have been widely studied. However, the impact of ROM changes on postoperative CSA and clinical outcomes after LMP remains unclear. Herein, patients with cervical spondylotic myelopathy (CSM) were retrospectively analyzed to explore the association between postoperative cervical ROM changes and CSA and surgical outcomes. METHODS: Patients who underwent cervical LMP at our hospital between January 2019 to June 2022 were retrospectively reviewed. CSA parameters were measured before the surgery and at the final follow-up. Loss of cervical lordosis (LCL) was defined as preoperative cervical lordosis (CL) - postoperative CL. An increase in the cervical sagittal vertical axis (I-cSVA) was defined as postoperative cervical sagittal vertical axis (cSVA) - preoperative cSVA. We defined the changes in cervical flexion range of motion (△Flex ROM, preoperative Flex ROM minus postoperative Flex ROM) > 10° as L- Flex ROM group, and △Flex ROM ≤ 10° as S- Flex ROM group. Japanese Orthopedic Association (JOA) score and visual analog score (VAS) were used to assess the surgical outcomes. RESULTS: The study comprised 74 patients and the average follow-up period was 31.83 months. CL, total ROM, and Flex ROM decreased and cSVA increased after cervical LMP. LCL and I-cSVA were positively correlated with △Flex. Multiple linear regression analysis showed that a decrease in the Flex ROM was a risk factor for LCL and I-cSVA after LMP. LCL and I-cSVA were higher in the L-Flex ROM group than in the S-Flex ROM group. Postoperative JOA and the JOA recovery rate were worse in the L-Flex ROM group than in the S-Flex ROM group. CONCLUSIONS: Cervical total and Flex ROM decreased after cervical LMP. The reduction of Flex ROM was associated with LCL and I-cSVA after surgery. The preservation of cervical Flex ROM helps maintain CSA after LMP. Therefore, more attention should be paid to maintaining cervical ROM to obtain good CSA and surgical effects after cervical LMP.

Biomechanical and ergonomic risks associated with cervical musculoskeletal dysfunction amongst surgeons: A systematic review.

INTRODUCTION: Surgeons are at high risk of developing musculoskeletal symptoms due to a range of factors including, maladaptive positioning and surgical ergonomics. Cervical muscle strain and biomechanical load is most prevalent due to repetitive motions and prolonged static neck positioning. This issue is apparent through reports of prevalence between 10 and 74.4% among surgeons. The aim of this systematic review is to provide an objective assessment of the clinical evidence available and a descriptive analysis of the effects of kinematics and surgical ergonomics on the prevalence of surgeons' cervical musculoskeletal pain. METHODS: This is PRISMA-compliant systematic review of clinical studies assessing the prevalence of cervical musculoskeletal dysfunction in surgeons by searching PUBMED and Ovid EMBASE databases from inception to 19th October 2023. Study quality was graded according to the National Institutes of Health study quality assessment tools. RESULTS: A total of 9 studies were included in the final qualitative analysis. The use of loupes, open surgery and excessive neck flexion (>30°) were associated with cervical dysfunction. Comparison of study outcomes was challenging due to heterogeneity within study methods and the paucity of methodological quality. CONCLUSION: The current literature assessing ergonomic and biomechanical factors predisposing surgeons to cervical musculoskeletal dysfunction is insufficient to provide reliable guidance for clinicians. Although the literature identifies factors contributing to work-related cervical dysfunction, few attempt to evaluate interventions for improved surgical ergonomics. An objective assessment of interventions that prompt postural correction with the aim to improve neck pain in surgeon cohorts is warranted.