Drug metabolism of ciprofloxacin, ivacaftor, and raloxifene by Pseudomonas aeruginosa cytochrome P450 CYP107S1.

Drug metabolism is one of the main processes governing the pharmacokinetics and toxicity of drugs via their chemical biotransformation and elimination. In humans, the liver, enriched with cytochrome P450 (CYP) enzymes, plays a major metabolic and detoxification role. The gut microbiome and its complex community of microorganisms can also contribute to some extent to drug metabolism. However, during an infection when pathogenic microorganisms invade the host, our knowledge of the impact on drug metabolism by this pathobiome remains limited. The intrinsic resistance mechanisms and rapid metabolic adaptation to new environments often allow the human bacterial pathogens to persist, despite the many antibiotic therapies available. Here, we demonstrate that a bacterial CYP enzyme, CYP107S1, from Pseudomonas aeruginosa, a predominant bacterial pathogen in cystic fibrosis (CF) patients, can metabolize multiple drugs from different classes. CYP107S1 demonstrated high substrate promiscuity and allosteric properties much like human hepatic CYP3A4. Our findings demonstrated binding and metabolism by the recombinant CYP107S1 of fluoroquinolone antibiotics (ciprofloxacin and fleroxacin), a CF transmembrane conductance regulator potentiator (ivacaftor), and a SERM antimicrobial adjuvant (raloxifene). Our in vitro metabolism data were further corroborated by molecular docking of each drug to the heme active site using a CYP107S1 homology model. Our findings raise the potential for microbial pathogens modulating drug concentrations locally at the site of infection, if not systemically, via CYP-mediated biotransformation reactions. To our knowledge, this is the first report of a CYP enzyme from a known bacterial pathogen that is capable of metabolizing clinically utilized drugs.

Photoisomerization and Light-Controlled Antibacterial Activity of Fluoroquinolone-Azoisoxazole Hybrids.

Photopharmacology holds a huge untapped potential to locally treat diseases involving photoswitchable drugs via the elimination of drugs' off-target effects. The growth of this field has created a pressing demand to develop such light-active drugs. We explored the potential for creating photoswitchable antibiotic hybrids by attaching pharmacophores norfloxacin/ciprofloxacin and azoisoxazole (photoswitch). All compounds exhibited a moderate to a high degree of bidirectional photoisomerization, long thermal cis half-lives, and impressive photoresistance. Gram-negative pathogens were found to be insensitive to these hybrids, while against Gram-positive pathogens, all hybrids in their trans states exhibited antibacterial activity that is comparable to that of the parent drugs. Notably, the toxicity of the irradiated hybrid 6 was found to be 2-fold lower than the nonirradiated trans isomer, indicating that the pre-inactivated cis-enriched drug can be employed for the site-specific treatment of bacterial infection using light, which could potentially eliminate the unwanted exposure of toxic antibiotics to both beneficial and untargeted harmful microbes in our body. Molecular docking revealed different binding affinity of the cis and trans isomers with the topoisomerase IV enzyme, due to their different shapes.

Fluoroquinolone antibiotics in the aquatic environment: environmental distribution, the research status and eco-toxicity.

The increasing presence of fluoroquinolone (FQ) antibiotics in aquatic environments is a growing concern due to their widespread use, negatively impacting aquatic organisms. This paper provides an overview of the environmental distribution, sources, fate, and both single and mixed toxicity of FQ antibiotics in aquatic environments. It also examines the accumulation of FQ antibiotics in aquatic organisms and their transfer into the human body through the food chain. The study identifies critical factors such as metabolism characteristics, physiochemical characteristics, light, temperature, dissolved oxygen, and environmental compatibility that influence the presence of FQ antibiotics in aquatic environments. Mixed pollutants of FQ antibiotics pose significant risks to the ecological environment. Additionally, the paper critically discusses advanced treatment technologies designed to remove FQ antibiotics from wastewater, focusing on advanced oxidation processes (AOPs) and electrochemical advanced oxidation processes (EAOPs). The discussion also includes the benefits and limitations of these technologies in degrading FQ antibiotics in wastewater treatment plants. The paper concludes by proposing new approaches for regulating and controlling FQ antibiotics to aid in the development of ecological protection measures.

Effect of the molecular weight of DOM on the indirect photodegradation of fluoroquinolone antibiotics.

Dissolved organic matter (DOM) is ubiquitous and widespread in natural water and influences the transformation and removal of antibiotics. Nevertheless, the influence of DOM molecular weight (MW) on the indirect photodegradation of antibiotics has rarely been reported. This study attempted to explore the influence of the molecular weight of DOM on the indirect photodegradation of two fluoroquinolone antibiotics (FQs), ofloxacin (OFL) and norfloxacin (NOR), by using UV-vis absorption and fluorescence spectroscopy. The results showed that indirect photodegradation was considered the main photodegradation pathway of FQs in DOM fractions. Triplet-state excited organic matter (3DOM*) and singlet oxygen (1O2) were the main reactive intermediates (RIs) that affected the indirect photodegradation of FQs. The indirect photodegradation rate of FQs was significantly promoted in DOM fractions, especially in the low molecular weight DOM fractions (L-MW DOM, MW < 10 kDa). The results of excitation-emission matrix spectroscopy combined with parallel factor analysis (EEM-PARAFAC) showed that terrestrial humic-like substances had a higher humification degree and fluorophore content in L- MW DOM fractions, which could produce more 3DOM* and 1O2 to promote the indirect photodegradation of FQs. This study provided new insight into the effects of DOM at the molecular weight level on the indirect photodegradation of antibiotics in natural water.

Activation of Peracetic Acid by CoFe2O4 for Efficient Degradation of Ofloxacin: Reactive Species and Mechanism.

Peroxyacetic acid (PAA)-based advanced oxidation processes (AOPs) have attracted much attention in wastewater treatment by reason of high selectivity, long half-life reactive oxygen species (ROS), and wider applicability. In this study, cobalt ferrite (CoFe2O4) was applied to activate PAA for the removal of ofloxacin (OFX). The degradation of OFX could reach 83.0% via the CoFe2O4/PAA system under neutral conditions. The low concentration of co-existing anions and organic matter displayed negligible influence on OFX removal. The contributions of hydroxyl radicals (·OH), organic radicals (R-O·), and other reactive species to OFX degradation in CoFe2O4/PAA were systematically evaluated. Organic radicals (especially CH3C(O)OO·) and singlet oxygen (1O2) were verified to be the main reactive species leading to OFX destruction. The Co(II)/Co(III) redox cycle occurring on the surface of CoFe2O4 played a significant role in PAA activation. The catalytic performance of CoFe2O4 remained above 80% after five cycles. Furthermore, the ecotoxicity of OFX was reduced after treatment with the CoFe2O4/PAA system. This study will facilitate further research and development of the CoFe2O4/PAA system as a new strategy for wastewater treatment.

Design, Synthesis and Evaluation of Novel Carbazole-Derived Photocages.

We report the design, synthesis and evaluation of two novel photocages, NCARB and isoNCARB, belonging to the o-nitrobenzyl chemotype and based on the carbazole ring system. The synthesis of each of these isomeric caging molecules was achieved in five steps and in 29 % overall yield, and their photochemical properties were evaluated using benzoic acid as a model for caging. In the event, upon irradiation at 400 nm for 60 min, 82 % and 42 % of benzoic acid was freed from the NCARB and isoNCARB photocages, respectively, whereas only 22 % was released from the nitrodibenzofuran (NDBF) cage. Moreover, the photochemical decaging efficiencies, ϵΦ, of the benzoates photocaged with NCARB and isoNCARB are about 150- and 20-fold better, respectively, at 400 nm than the corresponding caged benzoate derived from NDBF. The water solubility of molecules caged with nitrocarbazole analogs was improved by N-alkylation of NCARB, the better of the two new photocages, with an aminodicarboxylate group. This modified cage, NCARB-DA, was exploited in the design of a caged fluoroquinolone antibiotic, the efficacy of which was illustrated in a bacterial growth inhibition assay, and a phenol-caged tyrosine derivative.

Thermal desorption behavior of fluoroquinolones in contaminated soil of livestock and poultry breeding.

As a kind of typical veterinary drug, fluoroquinolone antibiotics (FQs) are widely used in the field of livestock and poultry breeding, but these FQs escape to surrounding soil through various pathways, polluting soil through long-term accumulation. Current study proposed a clean technology named thermal desorption to deal with FQs contaminated soils. It was observed that time, temperature and soil particle size were the critical factors in FQs thermal desorption. Results of the study showed that higher temperature was more effective in the removal of FQs, while removal of FQs attached with finer particles was more difficult compared to coarse particles. Fine soil particles (0.6-0.85 mm) were decontaminated up 99.4% when treated with 400 °C for 60min. Thermal desorption of FQs from contaminated soil was governed by first-order kinetics. Based on the detection of exhaust gas components, a possible thermal desorption mechanism was proposed. Study suggested that thermal desorption was a clean and effective remediation method to treat FQs-contaminated soils without generating any further waste.

Core-shell magnetic porous organic polymer for magnetic solid-phase extraction of fluoroquinolone antibiotics in honey samples followed by high-performance liquid chromatography with fluorescence detection.

By monomer-mediated in-situ growth synthesis strategy, with hydroquinone and 1,3,5-tris(4-aminophenyl)benzene as monomers, a core-shell magnetic porous organic polymer was synthesized through a simple azo reaction. Based on this, a magnetic solid-phase extraction-high-performance liquid chromatography-fluorescence detection method was proposed for the analysis of fluoroquinolones in a honey sample. With ofloxacin, ciprofloxacin, enrofloxacin, lomefloxacin, and difloxacin as target analytes, factors affecting the extraction efficiency had been optimized. The LODs were 1.5-5.4 ng/L (corresponding to 0.23-0.81 µg/kg in honey). The linear range was 0.005-20 µg/L for difloxacin, 0.01-20 µg/L for ofloxacin, ciprofloxacin and lomefloxacin, and 0.02-20 µg/L for enrofloxacin. The enrichment factor was 84.4-91.7-fold with a high extraction efficiency of 84.4-91.7%. The method was assessed by the analysis of target fluoroquinolones in honey samples, and the recoveries for the spiked samples were 79.3-95.8%. The results indicated that the established magnetic solid-phase extraction-high-performance liquid chromatography-fluorescence detection method is efficient for the analysis of trace fluoroquinolones in honey.

The clinical course of 239 cases of Japanese spotted fever in Ise Red Cross Hospital, 2006-2019.

INTRODUCTION: Although the mortality rates associated with Japanese spotted fever (JSF) are unknown, advances in testing technology have led to an increase in JSF-induced mortality reported in clinical practice. Up-to-date clinical information is essential for accurate diagnosis and prompt treatment of JSF. METHODS: This retrospective descriptive study included patients with JSF who were treated at the Ise Red Cross Hospital between 2006 and 2019. Diagnostic criteria included positive results of molecular-based tests during the acute phase and/or increased serum-specific antibody titers. This study was performed based on the clinical findings, clinical course, treatment, and prognosis in confirmed cases of JSF. RESULTS: We investigated 239 patients with a confirmed diagnosis of JSF (48.1% men, mean age 69.2 years). Notably, 237 patients received tetracycline antibiotics, and eight patients died (one patient was misdiagnosed and died without adequate treatment). Four of the remaining patients had a multi-organ failure at the time of admission. However, among the 155 consecutive patients who received effective antibiotic therapy after 2012, we observed two deaths; one patient died of hemorrhage secondary to non-steroidal anti-inflammatory drug-induced duodenal ulcer. CONCLUSIONS: Our study showed a case fatality rate of 3.3%, which indicates that JSF is a severe illness. Although a few cases of the fulminant disease are reported, early initiation of therapy was shown to improve JSF-induced mortality by approximately 1%. Prompt initiation of antibiotic therapy (even in the absence of genetic test results) is warranted in cases of suspected JSF.

Fluorescence Quenching Studies on the Interactions between Chosen Fluoroquinolones and Selected Stable TEMPO and PROXYL Nitroxides.

The influence of the stable 2,2,6,6-tetramethylpiperidinyl-N-oxyl (TEMPO) nitroxide and its six C4-substituted derivatives, as well as two C3-substituted analogues of 2,2,5,5-tetramethylpyrrolidynyl-N-oxyl (PROXYL) nitroxide on the chosen fluoroquinolone antibiotics (marbofloxacin, ciprofloxacin, danofloxacin, norfloxacin, enrofloxacin, levofloxacin and ofloxacin), has been examined in aqueous solutions by UV absorption as well as steady-state and time-resolved fluorescence spectroscopies. The mechanism of fluorescence quenching has been specified and proved to be purely dynamic (collisional) for all the studied systems, which was additionally confirmed by temperature dependence experiments. Moreover, the selected quenching parameters-that is, Stern-Volmer quenching constants and bimolecular quenching rate constants-have been determined and explained. The possibility of electron transfer was ruled out, and the quenching was found to be diffusion-limited, being a result of the increase in non-radiative processes. Furthermore, as the chosen nitroxides affected the fluorescence of fluoroquinolone antibiotics in different ways, an influence of the structure and the type of substituents in the molecules of both fluoroquinolones and stable radicals on the quenching efficiency has been determined and discussed. Finally, the impact of the solvent's polarity on the values of bimolecular quenching rate constants has been explained. The significance of the project comes from many applications of nitroxides in chemistry, biology and industry.

Application of FeIII-TAML/H2O2 system for treatment of fluoroquinolone antibiotics.

Over the recent past, fluoroquinolone antibiotics (FQs) have raised extensive attention due to their potential to induce the formation of resistance genes and "superbugs", thus various advanced oxidation techniques have been developed to eliminate their release into the environment. In the present study, the prototype tetraamido macrocyclic ligand (FeIII-TAML)/hydrogen peroxide (H2O2) system is employed to degrade FQs (i.e., norfloxacin and ciprofloxacin) over a wide pH range (i.e., pH 6-10), and the reaction rate increases with the increase in pH level. The effect of dosage of FeIII-TAML and H2O2 on the degradation of FQs is evaluated, and the reaction rate is linearly correlated with the added amount of chemicals. Moreover, the impact of natural organic matters (NOM) on the removal of FQs is investigated, and the degradation kinetics show that both NOM type and experimental concentration exhibit negligible influence on the oxidative degradation of selected antibiotics. Based on the results of liquid chromatography-high resolution mass spectrometry and theoretical calculations, the reaction sites and pathways of FQs by FeIII-TAML/H2O2 system are further predicted and elucidated.

Determination of fluoroquinolone antibiotics via ionic-liquid-based, salt-induced, dual microextraction in swine feed.

In conventional microextraction procedures, the disperser (organic solvent or ionic liquid) is left in the aqueous phase and discarded after finishing the microextraction process. Because the disperser is water-soluble, it results in low extraction recovery for polar compounds. In this investigation, an ionic-liquid-based microextraction (ILBME) was integrated with salting-out assisted liquid-liquid microextraction (SALLME) to build an ionic-liquid-based, salt-induced, dual microextraction (ILSDME) for isolation of five fluoroquinolone antibiotics (FQs) with high polarity (log P, -1.0 to 1.0). The proposed ILSDME method incorporates a dual microextraction by converting the disperser in the ILBME to the extractor in the SALLME. Optimization of key factors was conducted by integrating single-factor experiments and central composite design. The optimized experimental parameters were 80 µL [C8MIM][PF6] as extractor, 505 µL acetone as disperser, pH = 2.0, 4.1 min extraction time, and 4.2 g of Na2SO4. Under optimized conditions, high ERs (90.6-103.2 %) and low LODs (0.07-0.61 µg kg(-1)) were determined for five FQs in swine feed. Experimental precision based on RSDs was 1.4-5.2 % for intra-day and 2.4-6.9 % for inter-day analyses. The combination of ILBME with SALLME increased FQ recoveries by 15-20 % as compared with SALLME, demonstrating that the ILSDME method can enhance extraction efficiency for polar compounds compared to single-step microextraction. Therefore, the ILSDME method developed in this study has wide application for pretreatment of moderately to highly polar pollutants in complex matrices. Graphical Abstract A dual microextraction was developed by integrating ionic-liquid-based microextraction with salting-out assisted liquid-liquid microextraction for isolation of five fluoroquinolone antibiotics (FQs) with high polarity (log P = -1.0 to 1.0). The principle of dual microextraction is based on converting the remaining disperser from the first microextraction into an extractor in the second microextraction. Single-factor experiment and central composite design were applied for optimizing operational parameters using 3D response surfaces and contour lines. Under optimized conditions, the method provided high extraction recoveries and low LODs for five FQs in swine feed. The prominent advantage of the dual microextraction is rapid and highly efficient extraction of moderately to highly polar fluoroquinolones from complex matrices.

Determination of fluoroquinolones in environmental water and milk samples treated with stir cake sorptive extraction based on a boron-rich monolith.

In this study, a new stir cake sorptive extraction using a boron-rich monolith as the adsorbent was prepared by the in situ copolymerization of vinylboronic anhydride pyridine complex and divinylbenzene. The effect of preparation parameters, including the ratio of vinylboronic anhydride pyridine complex and divinylbenzene, monomer mixture, and porogen solvent, on extraction performance was investigated thoroughly. The physicochemical properties of the adsorbent were characterized by infrared spectroscopy, scanning electron microscopy, and mercury intrusion porosimetry. Several conditions affecting the extraction efficiency were investigated in detail. Under the optimized conditions, a convenient and sensitive method for the determination of trace fluoroquinolones residues in water and milk samples was established by coupling stir cake sorptive extraction with high-performance liquid chromatography and diode array detection. The limits of detection for the target compounds were 0.10-0.26 and 0.11-0.22 µg/L for water and milk samples, respectively. In addition, the developed method showed good linearity, repeatability, and precision. Finally, the proposed method was successfully applied for the detection of trace fluoroquinolones residues in environmental water and milk samples. Satisfactory recoveries were obtained for the determination of fluoroquinolones in spiking samples that ranged from 68.8 to 120%, with relative standard deviations below 10% in all cases.

Risk assessment of three fluoroquinolone antibiotics in the groundwater recharge system.

Three fluoroquinolone antibiotics agents (FQs) in groundwater and reclaimed water have been investigated in Changzhou and Beijing, China. The occurrence of ofloxacin (OFL), enrofloxacin (ENR) and norfloxacin (NOR) is in nanograms per liter and has 100% frequency. The concentration order of FQs in reclaimed water is NOR>OFL>ENR, whilst the order in groundwater is NOR>ENR>OFL. And then the single and mixture adsorption-desorption have been studied and showed that (i) silty clay loam has higher sorption capacity than loamy sand, (ii) competitive adsorption exists when the three selected FQs coexist, (iii) ENR has a significantly priority sorption to NOR, whilst OFL has a least sorption among the mixture, (iv) there is no significant difference between the desorption results of mixture and the indivdual compound in relatively low concentration, (v) the formed chemical bonds and the irreversible combination of adsorption point are the significant influential factors for explaining desorption hysteresis of the selected FQs. Based on the above study, transport model and risk quotient have been performed, and the calculated risk quotient reveals that: (i) the selected FQs risk order in reclaimed water is OFL>ENR>NOR, (ii) in groundwater, OFL and ENR pose a higher risk than NOR no matter whether considering the long time groundwater recharge. This study will help policy makers to decide which FQs need to be covered in the priority substance lists defined in legislative frameworks.

[Diagnosis and treatment of cystitis: more questions than answers?]

INTRODUCTION: Despite the prevalence of acute cystitis, there are still many unsolved problems of diagnosis and treatment of this disease. MATERIAL AND METHODS: To determine the nosological structure of dysuria, 126 female patients who sought medical attention for frequent painful urination were examined. To determine the incidence of outpatient visits to an urologist for patients with cystitis, medical records of 6753 patients of municipal outpatient clinic were analyzed. The results of treating cystitis in 85 patients also were evaluated. RESULTS: Among 126 patients with dysuria, 31 (24.6%), 42 (33.3%) and 47 (37.3%) patients had acute uncomplicated cystitis, recurrent (chronic) cystitis without the complicating factors and recurrent (chronic) cystitis with complicating factors, respectively. Three (2.4%), 2 (1.6%) and 1 (0.8%) patients had trichomoniasis, urogenital herpes and tuberculosis, respectively. As a result of 6753 visits to the urologist, inflammatory diseases of the genitourinary system were detected in 3194 (47.3%) patients, of which 64.7%, 19.6%, 5.3% and 2.7% had chronic pyelonephritis, chronic cystitis, chronic prostatitis and acute cystitis, respectively. Selecting the optimal drugs increases the treatment effectiveness of acute uncomplicated and chronic cystitis by 6% and 17%, respectively. CONCLUSIONS: Most of clinical guidelines and scientific publications aimed at acute uncomplicated cystitis, while the proportion of the disease does not exceed 26% among the patients presenting with dysuria, and comprise only 2.7% among outpatient urologist visits for infectious and inflammatory diseases of the urogenital tract. Selecting the optimal drugs increases the treatment effectiveness of acute uncomplicated and chronic cystitis by 6% and 17%, respectively.

Development and validation of a generic stability-indicating MEEKC method for five fluoroquinolone antibiotics.

In this paper, a reliable stability-indicating generic MEEKC method for the analysis of five commonly used fluoroquinolones (FQs) has been developed and optimized by a central composite circumscribed experimental design. The separation was carried out using a fused silica capillary (60.2 cm total length) and a microemulsion (ME) composed of 81.75% (w/w) of a 125 mM NaH2 PO4 solution having a pH of 2.75, 2.65% (w/w) SDS, 1.00% (w/w) n-octanol, 6.60% (w/w) n-butanol and 8.00% (w/w) 2-propanol. A voltage of 28 kV was applied in a reverse polarity mode. A linear relationship was established from 0.04 to 0.48 mg/ml with R2 values higher than 0.98 for all five FQs. Both repeatability and intermediate precision were less than 3% and accuracy ranging from 97 to 100%. Of note, ciprofloxacin impurity A and ofloxacin impurity A could be separated from the respective drug substance in a single run which cannot be achieved using the official HPLC method from the European Pharmacopoeia. Forced degradation of all FQs under heat, in acidic and alkaline medium, in the presence of oxidizing agents and under neutral hydrolysis conditions was investigated. The highest yield of degradation products was observed using oxidative hydrogen peroxide. Hence, the proposed MEEKC method can be used for the quantitative determination of the five FQs and their potential impurities within a total runtime of 20 min.

Characterization of antibiotic and disinfectant susceptibility profiles among Pseudomonas aeruginosa veterinary isolates recovered during 1994-2003.

AIMS: To evaluate susceptibility of Pseudomonas aeruginosa veterinary isolates to antibiotics and disinfectants. METHODS AND RESULTS: Pseudomonas aeruginosa isolates collected from dogs (n = 155) and other animals (n = 20) from sixteen states during 1994-2003 were tested for susceptibility. Most isolates were resistant to twenty-one antimicrobials tested, and the highest prevalence of resistance was to ß-lactams (93.8%) and sulphonamides (93.5%). Fluoroquinolone resistance did not increase from 1994 to 2003. Ciprofloxacin and enrofloxacin had a 5 and 16% prevalence of resistance, respectively, while sarafloxacin and nalidixic acid had a prevalence of resistance of 97 and 98%, respectively. Strains were pan-resistant to triclosan and chlorhexidine, were highly resistant to benzalkonium chloride and demonstrated high susceptibility to other disinfectants. Didecyldimethylammonium chloride was the most active ammonium chloride. Inducible resistance was observed to cetyl ammonium halides, chlorhexidine and benzyl ammonium chlorides, which formulate disinfectants used in veterinary clinics and dairies. Organic acid inhibition was associated with the dissociated acid species. CONCLUSIONS: Dissociated organic acids appear able to inhibit Ps. aeruginosa, and rates of fluoroquinolone resistance merit sustained companion animal isolate surveillance. SIGNIFICANCE AND IMPACT OF THE STUDY: This is the first report of Ps. aeruginosa susceptibility to 24 disinfectants and illustrates the high resistance of Ps. aeruginosa to both antibiotics and disinfectants.

Metal-free Carbon Material Derived from Lantana Camara for the Detection and Removal of Ciprofloxacin.

This work reports the preparation of a metal-free nitrogen and sulphur functionalized graphitic carbon sheets from a unique and less expensive precursor Lantana camara, which is a common hazardous weed in India. The synthesized material NS-CN-180 was successfully tested for the adsorption and removal of fluoroquinolone antibiotics ciprofloxacin. The surface morphology and elemental composition of NS-CN-180 were investigated through FESEM and XPS analyses. The SEM data reveals the graphitic sheets stacked onto each other with cavities in between them. The presence of various functional groups was identified through FT-IR spectroscopy and the degree of graphitization was calculated from XRD pattern. The probable mechanism of interaction for ciprofloxacin molecule with NS-CN-180 was also investigated with the help of FT-IR and zeta potential analyses. The fabricated material was found to be excellent for ciprofloxacin detection with a limit of detection value 16.08 nM. Also, the prepared material efficiently removes the 66.2% ciprofloxacin drug in 1 h. Adsorption and desorption experiments were performed to demonstrate the reusability of the material.

Spectral characterization, degradation behavior, quenching, and semi-quantification of fluoroquinolone antibiotics in the antibiotic-humic mixture using fluorescence spectroscopy.

Antibiotics, one of the significant emerging contaminants, are intensifying their continual spread out into the environment and affecting human health and the ecosystem in the developing country Bangladesh. This study characterizes widely used fluoroquinolone (FQ) antibiotics, formulates the method to spectrally distinguish them from ubiquitous, and important reactive, adsorbent, and altering catalytic macromolecule humic substances (HS), and further quantifies them using fluorescence spectroscopy. The presence of identical fluorophore at Excitation/Emission = 225-230/285-295 nm wavelength, possession of fluorescence spectra at short emission wavelength (<350 nm) during 275 nm excitation, different emission maxima, and various fluorescing components in antibiotics identified through three-dimensional excitation-emission matrix (EEM) and parallel factor analysis (PARAFAC) models distinguished them from the humic substance as well as from each other. Stern-Volmer equation and its modified version were applied to identify quenching and binding capability, and fluorescence intensity quenching rate of antibiotics and humic in their mixture. Unlike poor and inconsistent quenching mechanisms of humic, FQ antibiotics reduced HS intensity throughout the entire photo-irradiation experiment affirming the functioning of the stable quenching methods. Static quenching of fluorophores was identified from the redshift of excited wavelength on the electronic ground state. Temperature differences during daylight and dark conditions played contrasting roles during the fluorescence quenching of FQ. Unique spectral response at emission wavelength < 350 nm during 275 nm excitation in FQ was considered as its least intensity in the antibiotic-humic mixture and was also used to formulate distinct spectral pattern of each FQ antibiotic. The study also identified the traces of FQ antibiotics with various intensities at different lakes in Bangladesh.

In silico degradation of fluoroquinolones by a microalgae-based constructed wetland system.

Fluoroquinolone antibiotics (FQs) have been used worldwide due to their extended antimicrobial spectrum. However, the overuse of FQs leads to frequent detection in the environment and cannot be efficiently removed. Microalgae-based constructed wetland systems have been proven to be a relatively proper method to treat FQs, mainly by microalgae, plants, microorganisms, and sediments. To improve the removal efficiency of microalgae-constructed wetland, a systematic molecular design, screening, functional, and risk evaluation method was developed using three-dimensional quantitative structure-activity relationship models, molecular dynamics simulation, molecular docking, and TOPKAT approaches. Five designed ciprofloxacin alternatives with improved bactericidal effects and lower human health risks were found to be more easily degraded by microalgae (16.11-167.88 %), plants (6.72-58.86 %), microorganisms (9.10-15.02 %), and sediments (435.83 %-1763.51 %) compared with ciprofloxacin. According to the mechanism analysis, the removal effect of the FQs can be affected via changes in the number, bond energy, and molecular descriptors of favorable and unfavorable amino acids. To the best of our knowledge, this is the first comprehensive study of improving the microalgae, plants, microorganisms, and sediment removal efficiency of FQs in constructed wetlands, which provides theoretical support for the treatment of FQ pollution.