A comparison of gelatine surrogates for wound track assessment.

The use of ordnance gelatine has been widespread in the field of ballistics as a simulant for soft tissue when assessing ballistic threats. However, the traditional method of preparing ordnance gelatine is time-consuming and requires precision to ensure that the final mold meets the required specifications. Furthermore, temperature control is necessary post-production, and there are limitations on its usage duration. To address these issues, manufacturers have developed pre-mixed, gelatine-like products that are stable at room temperature and require less preparation time. Nonetheless, it is uncertain whether these new products can perform in the same manner as the gold standard of ordnance gelatine. This study used five types of blocks, including ordnance gelatine (10% and 20%), Clear Ballistics (10% and 20%) and Perma-Gel (10%) and subjected them to 9 mm, 0.380 Auto fired from a universal receiver and a 5.56 × 45 mm ammunition fired by a certified firearms instructor. Delta-V and total energy dissipation were measured after each test using data collected from ballistic chronographs placed in front of and behind each block. High-speed video was recorded, and a cut-down analysis conducted. The findings revealed variations in energy dissipation and fissure formation within the block, with greater energy based on fissure formation observed in the ordnance gelatine. Additionally, the high-speed video showed the occurrence of secondary combustions occurring in the premixed gelatines.

Skin simulants for wound ballistic investigation - an experimental study.

Gunshot wound analysis is an important part of medicolegal practice, in both autopsies and examinations of living persons. Well-established and studied simulants exist that exhibit both physical and biomechanical properties of soft-tissues and bones. Current research literature on ballistic wounds focuses on the biomechanical properties of skin simulants. In our extensive experimental study, we tested numerous synthetic and natural materials, regarding their macromorphological bullet impact characteristics, and compared these data with those from real bullet injuries gathered from medicolegal practice. Over thirty varieties of potential skin simulants were shot perpendicularly, and at 45°, at a distance of 10 m and 0.3 m, using full metal jacket (FMJ) projectiles (9 × 19 mm Luger). Simulants included ballistic gelatine at various concentrations, dental silicones with several degrees of hardness, alginates, latex, chamois leather, suture trainers for medical training purposes and various material compound models. In addition to complying to the general requirements for a synthetic simulant, results obtained from dental silicones shore hardness 70 (backed with 20 % by mass gelatine), were especially highly comparable to gunshot entry wounds in skin from real cases. Based on these results, particularly focusing on the macroscopically detectable criteria, we can strongly recommend dental silicone shore hardness 70 as a skin simulant for wound ballistics examinations.

Observing the fragmentation of two expanding bullet types and a full metal-jacketed bullet with computed tomography-a forensic ballistics case study.

Computed tomography (CT) may have a crucial role in the forensic documentation and analysis of firearm injuries. The aim of this forensic ballistics case study was to explore whether two types of expanding bullets and a full metal-jacketed bullet could be differentiated by inspecting bullet fragments and fragmentation pattern in CT. Three types of .30 caliber bullets (full metal-jacketed Norma Jaktmatch, expanding full-copper Norma Ecostrike, and expanding soft-point Norma Oryx) were test fired from a distance of 5 m to blocks of 10% ballistic gelatine. CT scans of the blocks were obtained with clinical equipment and metal artifact reduction. Radiopaque fragments were identified and fragmentation parameters were obtained from the scans (total number of fragments, maximum diameter of the largest fragment, distance between entrance and the closest fragment, length of the fragment cloud, and maximum diameters of the fragment cloud). The fragmentation patterns were additionally visualized by means of 3D reconstruction. In CT, the bullet types differed in several fragmentation parameters. While the expanding full-copper bullet Ecostrike left behind only a single fragment near the end of the bullet channel, the soft-point Oryx had hundreds of fragments deposited throughout the channel. For both expanding bullets Ecostrike and Oryx, the fragments were clearly smaller than those left behind by the full metal-jacketed Jaktmatch. This was surprising as the full metal-jacketed bullet was expected to remain intact. The fragment cloud of Jaktmatch had similar mediolateral and superoinferior diameters to that of Oryx; however, fragments were deposited in the second half of the gelatine block, and not throughout the block. This case study provides a basis and potential methodology for further experiments. The findings are expected to benefit forensic practitioners with limited background information on gunshot injury cases, for example, those that involve several potential firearms or atypical gunshot wounds. The findings may prove beneficial for both human and wildlife forensics.

Apoptotic extracellular vesicles derived from hypoxia-preconditioned mesenchymal stem cells within a modified gelatine hydrogel promote osteochondral regeneration by enhancing stem cell activity and regulating immunity.

Due to its unique structure, articular cartilage has limited abilities to undergo self-repair after injury. Additionally, the repair of articular cartilage after injury has always been a difficult problem in the field of sports medicine. Previous studies have shown that the therapeutic use of mesenchymal stem cells (MSCs) and their extracellular vesicles (EVs) has great potential for promoting cartilage repair. Recent studies have demonstrated that most transplanted stem cells undergo apoptosis in vivo, and the apoptotic EVs (ApoEVs) that are subsequently generated play crucial roles in tissue repair. Additionally, MSCs are known to exist under low-oxygen conditions in the physiological environment, and these hypoxic conditions can alter the functional and secretory properties of MSCs as well as their secretomes. This study aimed to investigate whether ApoEVs that are isolated from adipose-derived MSCs cultured under hypoxic conditions (hypoxic apoptotic EVs [H-ApoEVs]) exert greater effects on cartilage repair than those that are isolated from cells cultured under normoxic conditions. Through in vitro cell proliferation and migration experiments, we demonstrated that H-ApoEVs exerted enhanced effects on stem cell proliferation, stem cell migration, and bone marrow derived macrophages (BMDMs) M2 polarization compared to ApoEVs. Furthermore, we utilized a modified gelatine matrix/3D-printed extracellular matrix (ECM) scaffold complex as a carrier to deliver H-ApoEVs into the joint cavity, thus establishing a cartilage regeneration system. The 3D-printed ECM scaffold provided mechanical support and created a microenvironment that was conducive to cartilage regeneration, and the H-ApoEVs further enhanced the regenerative capacity of endogenous stem cells and the immunomodulatory microenvironment of the joint cavity; thus, this approach significantly promoted cartilage repair. In conclusion, this study confirmed that a ApoEVs delivery system based on a modified gelatine matrix/3D-printed ECM scaffold together with hypoxic preconditioning enhances the functionality of stem cell-derived ApoEVs and represents a promising approach for promoting cartilage regeneration.

Utilization of Lumpfish (Cyclopterus lumpus) Skin as a Source for Gelatine Extraction Using Acid Hydrolysis.

Lumpfish (Cyclopterus lumpus) is an underutilized marine resource that is currently only being exploited for roe. Lumpfish skin was pre-treated with alkali (0.1M NaOH) and acid (0.1M HCl) at a skin to chemical ratio of 1:10 for 24 h at 5 °C to remove non-collagenous proteins and minerals. The pre-treated skin was washed, and gelatine was extracted with 0.1M of acetic acid at three different ratios (1:5, 1:10, and 1:15), time (12,18, and 24 h), and temperature combinations (12, 28, and 24 °C). The highest total extraction yield (>40%) was obtained with combinations of extraction ratios of 1:15 and 1:10 with a longer time (24 h) and higher temperature (18-24 °C). The highest gelatine content was obtained with an extraction period of 24 h and ratio of 1:10 (>80%). SDS-PAGE analysis confirmed the presence of type-I collagen. A rheological evaluation indicated melting and gelling temperatures, gel strength, and viscosity properties comparable to existing cold-water gelatine sources.

Gelatine nanoparticles encapsulating three edible plant extracts as potential nanonutraceutical agents against type 2 diabetes mellitus.

AIM: To optimise, and characterise gelatine nanoparticles (GNPs) encapsulating plant extracts and evaluate the glucose-lowering potential. METHODS: GNPs encapsulating plant extracts were prepared by desolvation method followed by adsorption. The GNPs were characterised by loading efficiency, loading capacity, particle size, zeta potential, SEM and FTIR. The glucose-lowering activity of GNPs was determined using oral glucose tolerance test in high-fat diet fed streptozotocin-induced Wistar rats. RESULTS: Loading efficiency and capacity, particle mean diameter, and zeta potential of optimised GNPs 72.45 ± 13.03% w/w, 53.05 ± 26.16% w/w, 517 ± 48 nm and (-)23.43 ± 9.96 mV respectively. GNPs encapsulating aqueous extracts of C. grandis, S. auriculata, and ethanol 70% v/v extracts of M. koenigii showed glucose-lowering activity by 17.62%, 11.96% and 13.73% (p < 0.05) compared to the non-encapsulated extracts. FTIR analysis confirmed the encapsulation of phytoconstituents into GNPs. SEM imaging showed spherical GNPs (174 ± 46 nm). CONCLUSION: GNPs encapsulating plant extracts show promising potential to be developed as nanonutraceuticals against diabetes.

Gelatine Blends Modified with Polysaccharides: A Potential Alternative to Non-Degradable Plastics.

Non-degradable plastics of petrochemical origin are a contemporary problem of society. Due to the large amount of plastic waste, there are problems with their disposal or storage, where the most common types of plastic waste are disposable tableware, bags, packaging, bottles, and containers, and not all of them can be recycled. Due to growing ecological awareness, interest in the topics of biodegradable materials suitable for disposable items has begun to reduce the consumption of non-degradable plastics. An example of such materials are biodegradable biopolymers and their derivatives, which can be used to create the so-called bioplastics and biopolymer blends. In this article, gelatine blends modified with polysaccharides (e.g., agarose or carrageenan) were created and tested in order to obtain a stable biopolymer coating. Various techniques were used to characterize the resulting bioplastics, including Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA)/differential scanning calorimetry (DSC), contact angle measurements, and surface energy characterization. The influence of thermal and microbiological degradation on the properties of the blends was also investigated. From the analysis, it can be observed that the addition of agarose increased the hardness of the mixture by 27% compared to the control sample without the addition of polysaccharides. In addition, there was an increase in the surface energy (24%), softening point (15%), and glass transition temperature (14%) compared to the control sample. The addition of starch to the gelatine matrix increased the softening point by 15% and the glass transition temperature by 6%. After aging, both compounds showed an increase in hardness of 26% and a decrease in tensile strength of 60%. This offers an opportunity as application materials in the form of biopolymer coatings, dietary supplements, skin care products, short-term and single-contact decorative elements, food, medical, floriculture, and decorative industries.

Synthesis and Characterization of Amine and Aldehyde-Containing Copolymers for Enzymatic Crosslinking of Gelatine.

In tissue engineering (TE), the support structure (scaffold) plays a key role necessary for cell adhesion and proliferation. The protein constituents of the extracellular matrix (ECM), such as collagen, its derivative gelatine, and elastin, are the most attractive materials as possible scaffolds. To improve the modest mechanical properties of gelatine, a strategy consists of crosslinking it, as naturally occurs for collagen, which is stiffened by the oxidative action of lysyl oxidase (LO). Here, a novel protocol to crosslink gelatine has been developed, not using the commonly employed crosslinkers, but based on the formation of imine bonds or on aldolic condensation reactions occurring between gelatine and properly synthesized copolymers containing amine residues via LO-mediated oxidation. Particularly, we first synthesized and characterized an amino butyl styrene monomer (5), its copolymers with dimethylacrylamide (DMAA), and its terpolymer with DMAA and acrylic acid (AA). Three acryloyl amidoamine monomers (11a-c) and their copolymers with DMAA were then prepared. A methacrolein (MA)/DMAA copolymer already possessing the needed aldehyde groups was finally developed to investigate the relevance of LO in the crosslinking process. Oxidation tests of amine copolymers with LO were performed to identify the best substrates to be used in experiments of gelatine reticulation. Copolymers obtained with 5, 11b, and 11c were excellent substrates for LO and were employed with MA/DMAA copolymers in gelatine crosslinking tests in different conditions. Among the amine-containing copolymers, that obtained with 5 (CP5/DMMA-43.1) afforded a material (M21) with the highest crosslinking percentage (71%). Cytotoxicity experiments carried out on two cell lines (IMR-32 and SH SY5Y) with the analogous (P5) of the synthetic constituent of M21 (CP5/DMAA) had evidenced no significant reduction in cell viability, but proliferation promotion, thus establishing the biocompatibility of M21 and the possibility to develop it as a new scaffold for TE, upon further investigations.

Synthesis and Physicochemical Characterization of Gelatine-Based Biodegradable Aerogel-like Composites as Possible Scaffolds for Regenerative Medicine.

Regenerative medicine is an interdisciplinary field aiming at restoring pathologically damaged tissues and whole organs by cell transplantation in combination with proper supporting scaffolds. Gelatine-based ones are very attractive due to their biocompatibility, rapid biodegradability, and lack of immunogenicity. Gelatine-based composite hydrogels, containing strengthening agents to improve their modest mechanical properties, have been demonstrated to act as extracellular matrices (ECMs), thus playing a critical role in "organ manufacturing". Inspired by the lysyl oxidase (LO)-mediated process of crosslinking, which occurs in nature to reinforce collagen, we have recently developed a versatile protocol to crosslink gelatine B (Gel B) in the presence or absence of LO, using properly synthesized polystyrene- and polyacrylic-based copolymers containing the amine or aldehyde groups needed for crosslinking reactions. Here, following the developed protocol with slight modifications, we have successfully crosslinked Gel B in different conditions, obtaining eight out of nine compounds in high yield (57-99%). The determined crosslinking degree percentage (CP%) evidenced a high CP% for compounds obtained in presence of LO and using the styrenic amine-containing (CP5/DMAA) and acrylic aldehyde-containing (CPMA/DMAA) copolymers as crosslinking agents. ATR-FTIR analyses confirmed the chemical structure of all compounds, while optical microscopy demonstrated cavernous, crater-like, and labyrinth-like morphologies and cavities with a size in the range 15-261 µm. An apparent density in the range 0.10-0.45 g/cm3 confirmed the aerogel-like structure of most samples. Although the best biodegradation profile was observed for the sample obtained using 10% CP5/DMAA (M3), high swelling and absorption properties, high porosity, and good biodegradation profiles were also observed for samples obtained using the 5-10% CP5/DMAA (M4, 5, 6) and 20% CPMA/DMAA (M9) copolymers. Collectively, in this work of synthesis and physicochemical characterization, new aerogel-like composites have been developed and, based on their characteristics, which fit well within the requirements for TE, five candidates (M3, M4, M5, M6, and M9) suitable for future biological experiments on cell adhesion, infiltration and proliferation, to confirm their effective functioning, have been identified.

Graphene Oxide Strengthens Gelatine through Non-Covalent Interactions with Its Amorphous Region.

Graphene oxide (GO) has attracted huge attention in biomedical sciences due to its outstanding properties and potential applications. In this study, we synthesized GO using our recently developed 1-pyrenebutyric acid-assisted method and assessed how the GO as a filler influences the mechanical properties of GO-gelatine nanocomposite dry films as well as the cytotoxicity of HEK-293 cells grown on the GO-gelatine substrates. We show that the addition of GO (0-2%) improves the mechanical properties of gelatine in a concentration-dependent manner. The presence of 2 wt% GO increased the tensile strength, elasticity, ductility, and toughness of the gelatine films by about 3.1-, 2.5-, 2-, and 8-fold, respectively. Cell viability, apoptosis, and necrosis analyses showed no cytotoxicity from GO. Furthermore, we performed circular dichroism, X-ray diffraction, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy analyses to decipher the interactions between GO and gelatine. The results show, for the first time, that GO enhances the mechanical properties of gelatine by forming non-covalent intermolecular interactions with gelatine at its amorphous or disordered regions. We believe that our findings will provide new insight and help pave the way for potential and wide applications of GO in tissue engineering and regenerative biomedicine.

Effect of Olive Oil Hydrogel as a Fat Replacer in Beef Meatballs.

Research background: Meat and meat products are essential sources of dietary saturated fatty acids. However, excessive consumption of meat and meat products may be harmful to human health. The study evaluates the effect of fat replacement with hydrogels (olive oil in water emulsions gelled by gelatine) in meatballs. Experimental approach: The effect of replacing fat with different ratios of hydrogel (control, 25 (F25), 50 (F50), 75 (F75) and 100 % (F100)) on the chemical (fatty acids and thiobarbituric acid reactive substances (TBARS)) and physical (cooking loss, diameter reduction, fat retention, water retention, colour and texture analysis) characteristics of the meatballs were analyzed. Results and conclusions: The fat content of raw meatball samples was reduced from (31.2±2.2) to (10.5±0.4) % in the sample with the highest fat substitution (F100). The energy levels of the F100 samples were almost 56 % lower than of the control group. Monounsaturated fatty acids (MUFAs) represented the dominant group in all substitution rates of the meatballs, followed by saturated fatty acids (SFAs) and finally polyunsaturated fatty acids (PUFAs). Among the raw meatball samples, the highest oxidation occurred in the F50 and F100 groups. However, it was determined that the difference between F25 and F75 and the difference between control and F75 were not statistically significant (p˃0.05). When the cooked samples were compared, the highest thiobarbituric acid (TBA) value was found in the F50 sample, followed by the F100 and F75 samples. The difference between the mean values of springiness and cohesiveness of the samples was not significant (p˃0.05). The hardness value of samples decreased significantly (p˂0.001) with >75 % fat replacement. Novelty and scientific contribution: It can be concluded that the oil replacement rate that may satisfy consumer demand without impairing the product technological and chemical quality should be <75 %. As the fat replacement ratio increases, the SFA content of cooked meatballs decreases, while the MUFA and PUFA contents increase. Considering the positive effects of reducing the intake of SFAs and increasing the intake of unsaturated fatty acids on non-communicable diseases such as cardiovascular diseases, fat replacement in meatballs is important for future developments.

Quantitative titanium imaging in fish tissues exposed to titanium dioxide nanoparticles by laser ablation-inductively coupled plasma-mass spectrometry.

Imaging studies by laser ablation-inductively coupled plasma mass spectrometry have been successfully developed to obtain qualitative and quantitative information on the presence/distribution of titanium (ionic titanium and/or titanium dioxide nanoparticles) in sea bream tissues (kidney, liver, and muscle) after exposure assays with 45-nm citrate-coated titanium dioxide nanoparticles. Laboratory-produced gelatine standards containing ionic titanium were used as a calibration strategy for obtaining laser ablation-based images using quantitative (titanium concentrations) data. The best calibration strategy consisted of using gelatine-based titanium standards (from 0.1 to 2.0 µg g-1) by placing 5.0-µL drops of the liquid gelatine standards onto microscope glass sample holders. After air drying at room temperature good homogeneity of the placed drops was obtained, which led to good repeatability of measurements (calibration slope of 4.21 × 104 ± 0.39 × 104, n = 3) and good linearity (coefficient of determination higher than 0.990). Under the optimised conditions, a limit of detection of 0.087 µg g-1 titanium was assessed. This strategy allowed to locate prominent areas of titanium in the tissues as well as to quantify the bioaccumulated titanium and a better understanding of titanium dioxide nanoparticle spatial distribution in sea bream tissues.

Bioprinted PDLSCs with high-concentration GelMA hydrogels exhibit enhanced osteogenic differentiation in vitro and promote bone regeneration in vivo.

OBJECTIVES: We aimed to explore the osteogenic potential of periodontal ligament stem cells (PDLSCs) in bioprinted methacrylate gelatine (GelMA) hydrogels in vitro and in vivo. MATERIALS AND METHODS: PDLSCs in GelMA hydrogels at various concentrations (3%, 5%, and 10%) were bioprinted. The mechanical properties (stiffness, nanostructure, swelling, and degradation properties) of bioprinted constructs and the biological properties (cell viability, proliferation, spreading, osteogenic differentiation, and cell survival in vivo) of PDLSCs in bioprinted constructs were evaluated. Then, the effect of bioprinted constructs on bone regeneration was investigated using a mouse cranial defect model. RESULTS: Ten percent GelMA printed constructs had a higher compression modulus, smaller porosity, lower swelling rate, and lower degradation rate than 3% GelMA. PDLSCs in bioprinted 10% GelMA bioprinted constructs showed lower cell viability, less cell spreading, upregulated osteogenic differentiation in vitro, and lower cell survival in vivo. Moreover, upregulated expression of ephrinB2 and EphB4 protein and their phosphorylated forms were found in PDLSCs in 10% GelMA bioprinted constructs, and inhibition of eprhinB2/EphB4 signalling reversed the enhanced osteogenic differentiation of PDLSCs in 10% GelMA. The in vivo experiment showed that 10% GelMA bioprinted constructs with PDLSCs contributed to more new bone formation than 10% GelMA constructs without PDLSCs and constructs with lower GelMA concentrations. CONCLUSIONS: Bioprinted PDLSCs with high-concentrated GelMA hydrogels exhibited enhanced osteogenic differentiation partially through upregulated ephrinB2/EphB4 signalling in vitro and promoted bone regeneration in vivo, which might be more appropriate for future bone regeneration applications. CLINICAL RELEVANCE: Bone defects are a common clinical oral problem. Our results provide a promising strategy for bone regeneration through bioprinting PDLSCs in GelMA hydrogels.

Nanoparticle-based chewable gels of praziquantel.

Chewable gels present significant advantages over conventional dosage forms, despite their development is not comprehensively assessed. In this sense, six formulations, varying gelatine concentration, dose, and form of incorporation of praziquantel, were developed and characterized. The novelty of this approach focused not only on the development of the formulation itself but also on the incorporation of the drug in a nanoparticulated form. The obtained results for moisture content, water activity, pH, and drug content were within the expected values for this type of formulation. On the other hand, texture and disintegration parameters were influenced by the form of incorporation of praziquantel and the amount of gelatine added. Finally, in vitro dissolution of chewable gels showed significant differences with intermediate products, though the improved dissolution of the nanoparticulated drug was maintained. In conclusion, nanoparticulate drugs can be incorporated into these semisolid formulations and could be successfully applied to other low-aqueous solubility drugs.

Novel application of absorbable gelatine sponge combined with polyurethane film for dermal reconstruction of wounds with bone or tendon exposure.

Trauma, burns, and diabetes result in nonhealing wounds that can cause bone or tendon exposure, a significant health threat. The use of an artificial regeneration template combined with skin grafting as an alternative method to highly invasive flap surgery has been shown to be an effective way to cover full-thickness skin defects with bone or tendon exposure for both functional and aesthetic recovery. However, artificial regeneration templates, such as Pelnac, are overwhelmingly expensive, limiting their clinical use. Here, we demonstrate for the first time that polyurethane film combined with absorbable gelatine sponge, affordable materials widely used for haemostasis, are effective for dermal reconstruction in wounds with bone or tendon exposure. The absorbable gelatine sponge combined with polyurethane film was applied to eight patients, all resulting in adequate granulation that fully covered the exposed bone or tendon. The outcome of absorbable gelatine sponge combined with polyurethane film application indicates that this approach is a potential novel and cost-effective dermal reconstruction strategy for the treatment of severe wounds with bone or tendon exposure.

Improved oral bioavailability of febuxostat by liquid self-micro emulsifying drug delivery system in capsule shells.

PURPOSE: Febuxostat is a non-purine xanthine oxidase inhibitor which belongs to the BCS class II. Main aim of this study is to enhance dissolution and bioavailability of a drug by formulating a liquid self-micro emulsifying drug delivery system (SMEDDS) in different capsule shells. METHOD: Compatability of gelatin and cellulose capsule shells was checked with different oils, surfactants and co-surfactants. Solubility studies were then carried out in selected excipients. Capryol 90, labrasol, and PEG 400 were used in a liquid SMEDDS formulation based on phase diagram and the drug loading. Further SMEDDS was characterized for zeta potential, globule size and shape, thermal stability and in vitro release. Based on the in vitro release, pharmacokinetic study was carried out using SMEDDS in gelatin capsule shells. RESULT: The diluted SMEDDS had globule size of 157.9±1.5d.nm, zeta potential of -16.2±0.4mV and they were thermodynamically stable. The formulation was found stable for 12 months in capsule shells. When tested in different media (0.1N HCl and pH 4.5 acetate buffer), the in vitro release of newly produced formulations differed substantially from that of commercially available tablets, while the release rate in alkaline medium (pH 6.8) was comparable and the highest. According to in vivo findings in rats, a threefold increase in plasma concentration, a fourfold increase in AUC0-t, and a reduction in oral clearance increased fuxostat's oral bioavailability. CONCLUSION: This investigation revealed that the novel liquid SMEDDS formulation sealed in capsules has considerable potential as a vehicle for enhancing the bioavailability of febuxostat.

Colourimetric Plate Assays Based on Functionalized Gelatine Hydrogel Useful for Various Screening Purposes in Enzymology.

Hydrogels are intensively investigated biomaterials due to their useful physicochemical and biological properties in bioengineering. In particular, naturally occurring hydrogels are being deployed as carriers for bio-compounds. We used two approaches to develop a plate colourimetric test by immobilising (1) ABTS or (2) laccase from Trametes versicolor in the gelatine-based hydrogel. The first system (1) was applied to detect laccase in aqueous samples. We investigated the detection level of the enzyme between 0.05 and 100 µg/mL and pH ranging between 3 and 9; the stability of ABTS in the solution and the immobilised form, as well as the retention functional property of the hydrogel in 4 °C for 30 days. The test can detect laccase within 20 min in the concentration range of 2.5−100 µg/mL; is effective at pH 3−6; preserves high stability and functionality under storage and can be also successfully applied for testing samples from a microbial culture. The second system with the immobilised laccase (2) was tested in terms of substrate specificity (ABTS, syringaldazine, guaiacol) and inhibitor (NaN3) screening. ABTS appeared the most proper substrate for laccase with detection sensitivity CABTS > 0.5 mg/mL. The NaN3 tested in the range of 0.5−100 µg/mL showed a distinct inhibition effect in 20 min for 0.5 µg/mL and total inhibition for ≥75 µg/mL.

Pelvic arterial embolisation with cyanoacrylate during caesarean hysterectomy for placenta accreta.

PURPOSE: To compare n-butyl cyanoacrylate (NBCA) and gelatine sponge (GS) as embolic materials for prophylactic pelvic arterial embolisation during caesarean hysterectomy for placenta accreta spectrum (PAS). MATERIAL AND METHODS: This retrospective study comprised 12 women (age range, 23-42 years; mean, 34.1 years) who underwent caesarean hysterectomy for PAS. Following caesarean delivery, bilateral uterine and non-uterine parasitic arteries were embolized with GS in the first four cases (GS group) and primarily with NBCA mixed with iodized oil in the subsequent eight cases (NBCA group). Procedure time for embolisation and hysterectomy and total blood loss were compared between the two groups using Welch's t-test. RESULTS: Although procedure time for embolisation tended to be longer in the NBCA group than in the GS group (111 ± 47 min versus 71 ± 32 min, p=.11), that for hysterectomy was significantly reduced in the NBCA group when compared to the GS group (158 ± 42 min versus 236 ± 39 min, p=.02). Total blood loss was significantly lower in the NBCA group than in the GS group (1375 ± 565 mL versus 2668 ± 587 mL, p=.01). CONCLUSION: Procedure time for hysterectomy and total blood loss during caesarean hysterectomy can be reduced by using NBCA instead of GS in prophylactic pelvic arterial embolisation for PAS.

Intra-volume processing of gelatine hydrogel by femtosecond laser-induced cavitation.

Cell oxygenation and nutrition are crucial for the viability of tissue-engineered constructs, and different alternatives are currently being developed to achieve an adequate vascularisation of the engineered tissue. One of the alternatives is the generation of channel-like patterns in a bioconstruct. Here, the formation of full-formed channels inside hydrogels by laser-induced cavitation was investigated. A near-infrared, femtosecond laser beam focused with a high numerical aperture was employed to obtain intra-volume modifications of a block of gelatine hydrogel. Characterisation of the laser-processed gelatine was carried out by optical microscopy and epifluorescence microscopy right after and 24 h after the laser process. Rheology analyses on the unprocessed gelatine blocks were conducted to better understand the cavitation mechanism taking place during the intense laser interaction. Different cavitation patterns were observed at varying dose values by changing the repetition rate and the overlap between successive pulses while keeping the laser fluence and the number of passes fixed. This way, cavitation bubble features and behaviour can be controlled to optimise the formation of intra-volume channels in the gelatine volume. Results showed that the generation of fully formed channels was linked to the formation of large non-spherical cavitation bubbles during the laser interaction at high dose and low repetition rates. In conclusion, the formation of fully formed channels was made possible with a near-infrared, femtosecond laser beam strongly focused inside gelatine hydrogel blocks through laser-induced cavitation at high dose and low repetition rates.

Effect of middle ear gelfoam on hearing and healing process after tympanoplasty: A prospective randomized case-control study.

PURPOSE: This prospective randomized case-control study was performed to compare the surgical outcomes of our swing-door overlay tympanoplasty with or without absorbable gelatine sponge (AGS, gelfoam) packing in the middle ear cavity, according to the surgical procedure. METHODS: Fifty-seven patients who underwent swing-door overlay tympanoplasty by a single surgeon were enrolled in the study. The data of 30 patients of the gelfoam-packing group (GPG) and 27 patients of the non-gelfoam-packing group (NGPG) were prospectively collected and compared. RESULTS: Closure of the tympanic membrane was found to be successful in all patients at postoperative 3 months evaluation. NGPG showed a statistically better healing process compared to GPG; earlier epithelialization and less fascia edema in NGPG than in GPG (P < 0.05). The air-bone gap (ABG) measured at postoperative 1 and 2 months was smaller in NGPG than GPG, although there were no statistical differences. CONCLUSION: This study revealed earlier healing process and faster recovery of ABG in NGPG, thereby indicating that the gelfoam in the middle ear may interfere with both hearing recovery and the healing process of neodrum.