RESUMO
Optically bright emitters in hexagonal boron nitride (hBN) often acting as a source of a single-photon are mostly attributed to point-defect centers, featuring localized intra-bandgap electronic states. Although vacancies, anti-sites, and impurities have been proposed as candidates, the exact physical and chemical nature of most hBN single-photon emitters (SPEs) within the visible region are still up for debate. Combining site-specific high-angle annular dark-field imaging (HAADF) with electron energy loss spectroscopy (EELS), we resolve and identify a few carbon substitutions among neighboring hBN hexagons, all within the same sample region, from which typical defect emission is observed. Our experimental results are further supported by first-principles calculations, through which the stability and possible optical transitions of the proposed carbon-defect complex are assessed. The presented correlation between optical emission and defects provides valuable information toward the controlled creation of emitters in hBN, highlighting carbon complexes as another probable cause of its visible SPEs.
RESUMO
2D quantum materials have opened infinite doors, hosting intriguing phenomena and featuring incredible engineering potential. Whether these qualities can boost the use of 2D crystals for quantum applications remains an open field with yet unexplored paths.
RESUMO
Defects in wide bandgap materials have emerged as promising candidates for solid-state quantum optical technologies. Electrical excitation of single emitters may lead to scalable on-chip devices and therefore is highly sought after. However, most wide bandgap materials are not amenable to efficient doping, posing challenges for electrical excitation and on-chip integration. Here, we demonstrate narrowband electroluminescence from visible and near-infrared color centers in hexagonal boron nitride (hBN). We harness van der Waals tunnel junctions of graphene-hBN-graphene. Charge carriers are electrically injected into hBN, exciting localized defects that emit nonclassical light, as characterized by the second order correlation measurement. Remarkably, the devices operate at room temperature and produce robust, narrowband emission spanning from visible to the near-infrared. Our work marks an important milestone in vdW materials and their promising attributes for integrated quantum technologies and on-chip photonic circuits.
RESUMO
Accessing mid-infrared radiation is of great importance for a range of applications, including thermal imaging, sensing, and radiative cooling. Here, we study light interaction with hexagonal boron nitride (hBN) nanocavities and reveal strong and tunable resonances across its hyperbolic transition. In addition to conventional phonon-polariton excitations, we demonstrate that the high refractive index of hexagonal boron nitride outside the Reststrahlen band allows enhanced light-matter interactions in deep subwavelength (<λ/15) nanostructures across a broad 7-8 µm range. Emergence and interplay of Fabry-Perot and Mie-like resonances are examined experimentally and theoretically. Near-unity absorption and high quality (Q ≥ 80) resonance interaction in the vicinity of the hBN transverse optical phonon is further observed. Our study provides avenues to design highly efficient and ultracompact structures for controlling mid-infrared radiation and accessing strong light-matter interactions with hBN.
RESUMO
Two-dimensional transition metal dichalcogenide (2D TMD) semiconductors allow facile integration of p- and n-type materials without a lattice mismatch. Here, we demonstrate gate-tunable n- and p-type junctions based on vertical heterostructures of MoS2 and WSe2 using van der Waals (vdW) contacts. The p-n junction shows negative differential resistance (NDR) due to Fowler-Nordheim (F-N) tunneling through the triangular barrier formed by applying a global back-gate bias (VGS). We also show that the integration of hexagonal boron nitride (h-BN) as an insulating tunnel barrier between MoS2 and WSe2 leads to the formation of sharp band edges and unintentional inelastic tunnelling current. The devices based on vdW contacts, global VGS, and h-BN tunnel barriers exhibit NDR with a peak current (Ipeak) of 315 µA, suggesting that the approach may be useful for applications.
RESUMO
Hexagonal boron nitride (h-BN) bubbles are of significant interest to micro-scale hydrogen storage thanks to their ability to confine hydrogen gas molecules. Previous reports of h-BN bubble creation from grown h-BN films require electron beams under vacuum, making integrating with other experimental setups for hydrogen production impractical. Therefore, in this study, the formation of h-BN bubbles is demonstrated in a 20 nm h-BN film grown on a sapphire substrate with a 213 nm UV laser beam. Using atomic force microscopy, it is shown that longer illumination time induces larger h-BN bubbles up to 20 µm with higher density. It is also demonstrated that h-BN bubbles do not collapse for more than 6 months after their creation. The internal pressure and gravimetric storage capacity of h-BN bubbles are reported. A maximum internal pressure of 41 MPa and a gravimetric storage capacity of 6% are obtained. These findings show that h-BN bubbles can be a promising system for long-term hydrogen storage.
RESUMO
Despite the importance of the stability of the 2D catalysts in harsh electrolyte solutions, most studies have focused on improving the catalytic performance of molybdenum disulfide (MoS2) catalysts rather than the sustainability of hydrogen evolution. In previous studies, the vulnerability of MoS2 crystals is reported that the moisture and oxygen molecules can cause the oxidation of MoS2 crystals, accelerating the degradation of crystal structure. Therefore, optimization of catalytic stability is crucial for approaching practical applications in 2D catalysts. Here, it is proposed that monolayered MoS2 catalysts passivated with an atomically thin hexagonal boron nitride (h-BN) layer can effectively sustain hydrogen evolution reaction (HER) and demonstrate the ultra-high current density (500 mA cmâ»2 over 11 h) and super stable (64 h at 150 mA cmâ»2) catalytic performance. It is further confirmed with density functional theory (DFT) calculations that the atomically thin h-BN layer effectively prevents direct adsorption of water/acid molecules while allowing the protons to be adsorbed/penetrated. The selective penetration of protons and prevention of crystal structure degradation lead to maintained catalytic activity and maximized catalytic stability in the h-BN covered MoS2 catalysts. These findings propose a promising opportunity for approaching the practical application of 2D MoS2 catalysts having long-term stability at high-current operation.
RESUMO
Although hexagonal boron nitride (h-BN) was initially considered a less promising photocatalyst due to its large band gap and apparent chemical inertness, its unique two-dimensional lamellar structure coupled with high stability and environmental friendliness, as the second largest van der Waals material after graphene, provides a unique platform for photocatalytic innovation. This review not only highlights the intrinsic qualities of h-BN with photocatalytic potentials, such as high stability, environmental compatibility, and tunable bandgap through various modification strategies but also provides a comprehensive overview of the recent advances in h-BN-based nanomaterials for environmental and energy applications, as well as an in-depth description of the modification methods and fundamental properties for these applications. In addition, we discuss the challenges and prospects of h-BN-based nanomaterials for future photocatalysis.
RESUMO
Optical microscopy with white light illumination has been employed when obtaining exfoliated monolayer hexagonal boron nitride (1L hBN) films from a large number of randomly placed films on a substrate. However, real-time observation of 1L hBN using a color camera under white light illumination remains challenging since hBN is transparent in the visible wavelength range. The poor optical constant of 1L hBN films in microphotographs is significantly improved using a Si substrate coated with a SiNxthin-film (SiNx/Si). When observing hBN thin films on SiNx/Si using a color digital camera in an optical microscope under white light illumination, the clarity of the captured color images depends on the thickness of the SiNxfilm (d). For real-time direct observation, thedwas optimized based on quantitative chromatic studies tailored to Bayer filters of a color image sensor. Through image simulation, it was determined that the color difference between 1L hBN and the bare substrate is maximized atd= 59 or 70 nm, which was experimentally verified. The SiNx/Si with optimizeddvalues visualized 1L hBN films without requiring significant contrast enhancement via image processing under white light illumination in real-time. Furthermore, the captured color photographs facilitate the reliable determination of the number of layers in few-layer hBN films using the contrast of the green channel of the images.
RESUMO
Two-dimensional semiconducting materials such as MoS2have gained significant attention for potential applications in electronic components due to their reduced dimensionality and exceptional electrical and optoelectronic properties. However, when reporting the performance of such 2D-based devices, one needs to consider the effect of the environment in which the characterization is carried out. Air exposure has a non-negligible impact on the electronic performance and vacuum thermal annealing is an established method to decrease the effects of adsorbates. Nevertheless, when measurements are performed in ambient conditions these effects arise again. In this work, we study the changes in the electrical and optoelectronic properties of single-layer MoS2-based devices at air exposure after thermal annealing treatment. Measurements are carried out in anin-situvacuum thermal annealing system, enabling the recording of electrical performance degradation over time. Moreover, this work shows how hexagonal boron nitride (hBN) capping improves device performance, both in vacuum and after venting, as well as stability, by decreasing the degradation speed by around six times. The results suggest that vacuum thermal annealing and hBN capping are methods to mitigate the effects of air environment on these devices.
RESUMO
Semitransparent solar cells are attracting attention not only for their visual effects but also for their ability to effectively utilize solar energy. Here, we demonstrate a translucent solar cell composed of bis(trifluoromethane sulfonyl)-amide (TFSA)-doped graphene (Gr), graphene quantum dots (GQDs), and LaVO3. By introducing a GQDs intermediate layer at the TFSA-Gr/LaVO3interface, we can improve efficiency by preventing carrier recombination and promoting charge collection/separation in the device. As a result, the efficiency of the GQDs-based solar cell was 4.35%, which was higher than the 3.52% of the device without GQDs. Furthermore, the average visible transmittance of the device is 28%, making it suitable for translucent solar cells. The Al reflective mirror-based system improved the power conversion efficiency by approximately 7% compared to a device without a mirror. Additionally, the thermal stability of the device remains at 90% even after 2000 h under an environment with a temperature of 60 °C and 40% relative humidity. These results suggest that TFSA-Gr/GQDs/LaVO3-based cells have a high potential for practical use as a next-generation translucent solar energy power source.
RESUMO
Two-dimensional (2D) semiconductor and LaVO3materials with high absorption coefficients in the visible light region are attractive structures for high-performance photodetector (PD) applications. Insulating 2D hexagonal boron nitride (h-BN) with a large band gap and excellent transmittance is a very attractive material as an interface between 2D/semiconductor heterostructures. We first introduce WS2/h-BN/LaVO3semitransparent PD. The photo-current/dark current ratio of the device exhibits a delta-function characteristic of 4 × 105at 0 V, meaning 'self-powered'. The WS2/h-BN/LaVO3PD shows up to 0.27 A W-1responsivity (R) and 4.6 × 1010cm Hz1/2W-1detectivity (D*) at 730 nm. Especially, it was confirmed that theD* performance improved by about 5 times compared to the WS2/LaVO3device at zero bias. Additionally, it is suggested that the PD maintains 87% of its initialRfor 2000 h under the atmosphere with a temperature of 25 °C and humidity of 30%. Based on the above results, we suggest that the WS2/h-BN/LaVO3heterojunction is promising as a self-powered optoelectronic device.
RESUMO
The field-effect transistor (FET) is a fundamental component of semiconductors and the electronic industry. High on-current and mobility with layer-dependent features are required for outstanding FET channel material. Two-dimensional materials are advantageous over bulk materials owing to their higher mobility, high ON/OFF ratio, low tunneling current, and leakage problems. Moreover, two-dimensional heterostructures provide a better way to tune electrical properties. In this work, the two distinct possibilities of PdSe2/MoSe2heterostructure have been employed through mechanical exfoliation and analyzed their electrical response. These diffe approaches to heterostructure formation serve as crucial components of our investigation, allowing us to explore and evaluate the unique electronic properties arising from each design. This work demonstrates that the heterostructure possesses a better ON/OFF ratio of â¼5.78 × 105, essential in switching characteristics. Moreover, MoSe2provides a defect-free interface to PdSe2, resulting in a higher ON current of â¼10µA and mobility of â¼63.7 cm2V-1s-1, necessary for transistor applications. In addition, comprehending the process of charge transfer occurring at the interface between transition metal dichalcogenides is fundamental for advancing next-generation technologies. This work provides insights into the interface formed between the PdSe2and MoSe2that can be harnessed in transistor applications.
RESUMO
Optically active point defects in semiconductors have received great attention in the field of solid-state quantum technologies. Hexagonal boron nitride, with an ultra-wide band gapEg= 6 eV, containing a negatively charged boron vacancy (VB-) with unique spin, optical, and coherent properties presents a new two-dimensional platform for the implementation of quantum technologies. This work establishes the value ofVB-spin polarization under optical pumping withλext= 532 nm laser using high-frequency (νmw= 94 GHz) electron paramagnetic resonance (EPR) spectroscopy. In optimal conditions polarization was found to beP≈ 38.4%. Our study reveals that Rabi oscillations induced on polarized spin states persist for up to 30-40µs, which is nearly two orders of magnitude longer than what was previously reported. Analysis of the coherent electron-nuclear interaction through the observed electron spin echo envelope modulation made it possible to detect signals from remote nitrogen and boron nuclei, and to establish a corresponding quadrupole coupling constantCq= 180 kHz related to nuclear quadrupole moment of14N. These results have fundamental importance for understanding the spin properties of boron vacancy.
RESUMO
In this study, Non-Equilibrium Molecular Dynamics (NEMD) simulation is employed to investigate the phonon thermal conductivity (PTC) of Sn/hBN van der Waals heterostructures with different vacancy-induced defects. We deliberately introduce three types of vacancies in Sn/hBN bilayer point vacancies, bivacancies, and edge vacancies at various concentrations ranging from 0.25% to 2%, to examine their effects on PTC across temperatures from 100 K to 600 K. The key findings of our work are (i) PTC declines monotonically with increasing vacancy concentration for all types of vacancies, with a maximum reduction of â¼62% observed at room temperature compared to its pristine form. (ii) The position of defects has an impact on PTC, with a larger decrease observed when defects are present in the hBN layer and a smaller decrease when defects are in the Sn layer. (iii) The type of vacancy also influences PTC, with point vacancies causing the most substantial reduction, followed by bivacancies, and edge vacancies having the least effect. A 2% defect concentration results in a â¼62% decrease in PTC for point vacancies, â¼51% for bivacancies, and â¼32% for edge vacancies. (iv) Finally, our results indicate that for a given defect concentration, PTC decreases as temperature increases. The impact of temperature on thermal conductivity is less pronounced compared to the effect of vacancies for the defective Sn/hBN bilayer. The presence of vacancies and elevated temperatures enhance phonon-defect and phonon-phonon scattering, leading to changes in the phonon density of states (PDOS) profile and the distribution of phonons across different frequencies of Sn/hBN bilayer, thus affecting its thermal conductivity. This work offers new insights into the thermal behavior of vacancy-filled Sn/hBN heterostructures, suggesting potential pathways for modulating thermal conductivity in bilayer van der Waals heterostructures for applications in thermoelectric, optoelectronics, and nanoelectronics in future.
RESUMO
Negatively charged boron vacancies (VB-) in hexagonal boron nitride (hBN) have recently gained interest as spin defects for quantum information processing and quantum sensing by a layered material. However, the boron vacancy can exist in a number of charge states in the hBN lattice, but only the -1 state has spin-dependent photoluminescence and acts as a spin-photon interface. Here, we investigate the charge state switching of VB defects under laser and electron beam excitation. We demonstrate deterministic, reversible switching between the -1 and 0 states (VB- â VB0 + e-), occurring at rates controlled by excess electrons or holes injected into hBN by a layered heterostructure device. Our work provides a means to monitor and manipulate the VB charge state, and to stabilize the -1 state which is a prerequisite for spin manipulation and optical readout of the defect.
RESUMO
The negatively charged boron vacancy (VB-) defect in hexagonal boron nitride (hBN) with optically addressable spin states has emerged due to its potential use in quantum sensing. Remarkably, VB- preserves its spin coherence when it is implanted at nanometer-scale distances from the hBN surface, potentially enabling ultrathin quantum sensors. However, its low quantum efficiency hinders its practical applications. Studies have reported improving the overall quantum efficiency of VB- defects with plasmonics; however, the overall enhancements of up to 17 times reported to date are relatively modest. Here, we demonstrate much higher emission enhancements of VB- with low-loss nanopatch antennas (NPAs). An overall intensity enhancement of up to 250 times is observed, corresponding to an actual emission enhancement of â¼1685 times by the NPA, along with preserved optically detected magnetic resonance contrast. Our results establish NPA-coupled VB- defects as high-resolution magnetic field sensors and provide a promising approach to obtaining single VB- defects.
RESUMO
Two-dimensional (2D) bismuthene is predicted to possess intriguing physical properties, but its preparation remains challenging due to the high surface energy constraint. Herein, we report a sandwiched epitaxy growth strategy for the controllable preparation of 2D bismuthene between a Cu foil substrate and a h-BN covering layer. The top h-BN layer plays a crucial role in suppressing the structural transformation of bismuthene and compensating for the charge transfer from the bismuthene to the Cu(111) surface. The bismuthene nanoflakes present a superior thermal stability up to 500 °C in air, attributed to the passivation effect of the h-BN layer. Moreover, the bismuthene nanoflakes demonstrate an ultrahigh faradaic efficiency of 96.3% for formate production in the electrochemical CO2 reduction reaction, which is among the highest reported for Bi-based electrocatalysts. This study offers a promising approach to simultaneously synthesize and protect 2D bismuthene nanoflakes, which can be extended to other 2D materials with a high surface energy.
RESUMO
Spin defects existing in van der Waals materials attract wide attention thanks to their natural advantages for in situ quantum sensing, especially the negatively charged boron vacancy (VB-) centers in hexagonal boron nitride (h-BN). Here we systematically investigate the laser and microwave power broadening in continuous-wave optically detected magnetic resonance (ODMR) of the VB- ensemble in h-BN, by revealing the behaviors of ODMR contrast and line width as a function of the laser and microwave powers. The experimental results are well explained by employing a two-level simplified model of ODMR dynamics. Furthermore, with optimized power, the DC magnetic field sensitivity of VB- ensemble is significantly improved up to 2.87 ± 0.07 µT/Hz. Our results provide important suggestions for further applications of VB- centers in quantum information processing and ODMR-based quantum sensing.
RESUMO
The omnipresence of hexagonal boron nitride (hBN) in devices embedding two-dimensional materials has prompted it as the most sought after platform to implement quantum sensing due to its testing while operating capability. The negatively charged boron vacancy (VB-) in hBN plays a prominent role, as it can be easily generated while its spin population can be initialized and read out by optical means at room-temperature. But the lower quantum yield hinders its widespread use as an integrated quantum sensor. Here, we demonstrate an emission enhancement amounting to 400 by nanotrench arrays compatible with coplanar waveguide (CPW) electrodes employed for spin-state detection. By monitoring the reflectance spectrum of the resonators as additional layers of hBN are transferred, we have optimized the overall hBN/nanotrench optical response, maximizing thereby the luminescence enhancement. Based on these finely tuned heterostructures, we achieved an enhanced DC magnetic field sensitivity as high as 6 × 10-5 T/Hz1/2.