Muscle synergy and kinematic synergy analyses during sit-to-stand motions in hallux valgus patients before and after treatment with Kinesio taping.

OBJECTIVES: To explore the impact of hallux valgus (HV) on lower limb neuromuscular control strategies during the sit-to-stand (STS) movement, and to evaluate the effects of Kinesio taping (KT) intervention on these control strategies in HV patients. METHODS: We included 14 young healthy controls (HY), 13 patients in the HV group (HV), and 11 patients in the HV group (HVI) who underwent a Kinesio taping (KT) intervention during sit-to-stand (STS) motions. We extracted muscle and kinematic synergies from EMG and motion capture data using non-negative matrix factorization (NNMF). In addition, we calculated the center of pressure (COP) and ground reaction forces (GRF) to assess balance performance. RESULTS: There were no significant differences in the numbers of muscle and kinematic synergies between groups. In the HV group, knee flexors and ankle plantar flexors were abnormally activated, and muscle synergy D was differentiated. Muscle synergy D was not differentiated in the HVI group. CONCLUSION: Abnormal activation of knee flexors and plantar flexors led to the differentiation of module D in HV patients, which can be used as an indicator of the progress of HV rehabilitation. KT intervention improved motor control mechanisms in HV patients.

Eligibility for knee arthroplasty is associated with increased risk of acquired hallux valgus - a Mendelian randomized study.

OBJECTIVE: Clinically, it has been found that patients undergoing knee replacement have a high incidence of concomitant hallux valgus. In this study, we analyzed whether patients with osteoarthritis who underwent surgery and those patient who did not have surgery had an increased risk of hallux valgus by Mendelian randomization and performed reverse causal analysis. DESIGN: Genomewide association study (GWAS) data for osteoarthritis, categorized by knee arthritis with joint replacement, knee arthritis without joint replacement, hip arthritis with joint replacement, and hip arthritis without joint replacement.And acquired hallux valgus were downloaded for Mendelian randomized studies. MR analysis was performed using inverse variance-weighted (IVW), weighted median, and MR-Egger methods. MR-egger regression, MR pleiotropic residuals and outliers (MR-presso), and Cochran's Q statistical methods were used to evaluate heterogeneity and pleiotropy. RESULTS: The IVW results indicate that, compared to healthy individuals, patients who meet the criteria for knee osteoarthritis joint replacement surgery have a significantly higher risk of acquired hallux valgus. There were no significant causal relationships found for the remaining results. No significant heterogeneity or multiplicity was observed in all the Mr analyses. CONCLUSION: Our study supports the increased risk of acquired hallux valgus in patients eligible for knee replacement. There is necessary for clinicians to be concerned about the hallux valgus status of patients undergoing knee arthroplasty.

Comparative effects of modified rotary scarf osteotomy and traditional scarf osteotomy in treating moderate to severe hallux valgus: a retrospective cohort study.

BACKGROUND: Traditional Scarf osteotomy (TSO) is an effective procedure with a good record in moderate to severe hallux valgus (MSHV) surgery. In order to overcome shortcomings of TSO, Modified Rotary Scarf osteotomy (MRSO) was introduced in this study, which aimed to compare the clinical and radiological outcome in the patients treated with MRSO or TSO. METHODS: Of 175 patients (247 feet) with MSHV, 100 patients (138 feet) treated with MRSO and 75 patients (109 feet) treated with TSO were evaluated according to relevant indicators in twenty-four months follow-up. Pre-surgical and post-surgical HVA, IMA, DMAA, MTP-1 ROM, sesamoid grade and AOFAS (American Orthopaedic Foot and Ankle Society) scores and postsurgical complications were evaluated. RESULTS: Both groups manifested similar baseline characters. The mean follow-up was of 25.9 (range, 22-37) months. Significantly lower IMA, lower Sesamoid grade and higher DMAA at six months, twelve months and twenty-four months post-surgically had been showed in MRSO group compared to TSO group. There was no significant difference in HVA, MTP-1 ROM and AOFAS data at each follow-up time point post-surgically between the two groups. No major complications occurred in either group. CONCLUSION: MRSO showed comparable results to TSO, and improved IMA and sesamoid grade to a greater extent, with a lower probability of throughing effect. Although DMAA could be increased by MRSO, MRSO could still be a reproducible, non-dangerous and efficacious alternative procedure for treating HV patients which do not have severe DMAA.

Cross-sectional study of the prevalence of hyperextension of the first metatarsophalangeal joint and its relationship to onycholysis in women with hallux valgus.

BACKGROUND: Hallux Valgus (HV) deformity is associated with misalignment in the sagittal plane that affects the first toe. However, the repercussions of the first toe hyperextension in HV have been scarcely considered. The purpose of this study was to provide evidence of the association between first-toe hyperextension and the risk of first toenail onycholysis in HV. METHODS: A total of 248 HV from 129 females were included. The extension of 1st MTP joint was measured while the patient was in the neutral position of the hallux using a two-branch goniometer. The classification of the HV severity stage was determined by the Manchester visual scale, and the height of the first toe in the standing position was measured using a digital meter. An interview and clinical examination were performed to collect information on the presence of onycholysis of the first toe. RESULTS: Of the 248 HV studied, 100 (40.3%) had onycholysis. A neutral extension > 30 degrees was noted in 110 (44.3%) HV. The incidence of onycholysis was higher in HV type C than in type B (p = 0.044). The probability of suffering onycholysis in the right foot was 2.3 times greater when the neutral position was higher than 30 degrees (OR = 2.3; p = 0.004). However, this was not observed in the left foot (p = 0.171). Onycholysis was more frequent in HV with more than 2 cm height of the first toe (p < 0.001). For both feet, the probability of suffering onycholysis was greater for each unit increase in hallux height (right foot OR = 9.0402, p = 0.005; left foot OR = 7.6633, p = 0.010). CONCLUSIONS: The incidence of onycholysis appears to be significantly associated with HV showing more than 30º extension, and more than 2 cm height of the first toe. Height and hyperextension of the first toe together with first toenail pathology should be mandatory in the evaluation of HV.

Automatic estimation of hallux valgus angle using deep neural network with axis-based annotation.

OBJECTIVES: We developed the deep neural network (DNN) model to automatically measure hallux valgus angle (HVA) and intermetatarsal angle (IMA) on foot radiographs. The objective is to assess the accuracy of the model by comparing to the manual measurement of foot and ankle surgeons. MATERIALS AND METHODS: A DNN was developed to predict the bone axes of the first proximal phalanx and all metatarsals from the first to the fifth in foot radiographs. The dataset used for model development consisted of 1798 radiographs collected from a population-based cohort and patients at our foot and ankle clinic. The retrospective validation cohort comprised of 92 radiographs obtained from 92 consecutive patients visiting our foot and ankle clinic. The mean absolute error (MAE) between automatic measurements by the model and the median of manual measurements by three foot and ankle surgeons was compared to 3° using one-tailed t-test and was also compared to the inter-rater difference in manual measurements among the three surgeons using two-tailed paired t-test. RESULTS: The MAE for HVA was 1.3° (upper limit of 95% CI 1.6°), and this was significantly smaller than the inter-rater difference of 2.0 ± 0.2° among the surgeons, demonstrating the superior accuracy of the model. In contrast, the MAE for IMA was 0.8° (upper limit of 95% CI 1.0°) that showed no significant difference from the inter-rater difference of 1.0 ± 0.1° among the surgeons. CONCLUSION: Our model demonstrated the ability to measure the HVA and IMA with an accuracy comparable to that of specialists.

First metatarsophalangeal joint arthroscopy: Unearthing clinical evidence - A systematic review.

PURPOSE: Arthroscopy of the first metatarsophalangeal joint (1 MTP) has gained increasing attention in the last two decades. Despite numerous studies describing the surgical technique, only a few provide clinical or radiological outcome data. This systematic review aimed to analyze studies presenting objectively measurable clinical outcomes of patients who underwent 1 MTP arthroscopy as the primary procedure, categorizing results by indication pathology. METHODS: Following PRISMA guidelines, PubMed and Cochrane databases were searched for studies reporting outcomes of primary 1 MTP arthroscopy, regardless of underlying pathology. The selected articles were thoroughly assessed to extract data regarding the demographics of included patients, pathology, preoperative and postoperative clinical and radiological outcomes, complications, and reinterventions. RESULTS: Fourteen articles, involving 405 patients (419 halluces), were included. Common indications were hallux valgus and hallux rigidus. Notably, Hallux Valgus Angle improved from 28.9° to 12.7°, and Intermetatarsal Angle improved from 13.8° to 9.2°, where reported. In hallux rigidus patients, range of motion increased from 25.15° to 71.3° post-surgery. Temporary or permanent sensory loss occurred in 3% of treated halluces, with 4.28% requiring reoperation. CONCLUSIONS: Evidence on 1 MTP arthroscopy as the primary procedure is limited. It is most effective for hallux rigidus, while in hallux valgus cases, it can achieve satisfactory angular corrections but has a relatively high recurrence and reoperation rate. Although this technique is generally safe, further research should compare it with traditional surgical approaches to provide comprehensive insights. LEVEL OF EVIDENCE: IV.

Relationship between the medial cuneiform bone morphology and the severity of hallux valgus.

BACKGROUND: It has been reported on the relationship between the medial cuneiform bone morphology, especially in terms of obliquity, and the severity of hallux valgus (HV), however, no consensus has been obtained. On the other hand, there are no reports on the relationship between the difference in height between the medial and intermediate cuneiforms and the severity of hallux valgus. The purpose of this study was to clarify the relationship between the medial cuneiform bone morphology and the severity of HV. METHODS: The authors retrospectively analyzed 200 feet of 116 patients who had a weightbearing anteroposterior foot radiograph taken between April 2017 and July 2022 and diagnosed with HV. Measurements included the hallux valgus angle (HVA), the intermetatarsal angle (IMA), the distal medial cuneiform angle (DMCA) and the cuneiform first-second length (C1-2D). HV groups were classified into one of three groups: mild (15 ≦ HVA<30°, 9 < IMA<13°), moderate (30 ≦ HVA<40°, 13 ≦ IMA≦20°) and severe groups (HVA≧40°, IMA>20°), and the relationship to DMCA or the difference in height between the medial and intermediate cuneiforms was analyzed. RESULTS: A total of 163 feet of 93 patients were included in this study. There were significant correlations between the HVA and the DMCA (r = 0.47, p <0.001) or the C1-2D (r = 0.64, p <0.001). There was no significant difference in DMCA between the mild and moderate groups (p = 0.14). On the other hand, significant differences in C1-2D were observed between the three groups (mild-moderate; p <0.001, moderate-severe; p = 0.03, mild-severe; p <0.001). IMA was also positively correlated with the DMCA (r = 0.30, p <0.001) or the C1-2D (r = 0.47, p <0.001). However, the DMCA (p = 0.07) and the C1-2D (p = 0.39) did not differ significantly from IMA between the moderate and severe groups. CONCLUSIONS: The difference in height between the medial and intermediate cuneiforms, referred to as C1-2D, is closely associated with the HVA. The C1-2D may influence the progression of HV and be a novel radiographic parameter that indicates severity of HV.

First ray mobility in hallux rigidus, hallux valgus, and normal feet based on weightbearing computed tomography and three-dimensional analysis: A case-control study.

BACKGROUND: Hallux valgus and hallux rigidus are disorders affecting the first ray and are associated with hypermobility of this structure. This study aimed to investigate the three-dimensional mobility of each joint of the first ray between feet with hallux valgus or hallux rigidus and healthy feet using weightbearing and nonweightbearing computed tomography (CT). METHODS: This case-control study analyzed 17 feet of 11 healthy volunteers (control group), 16 feet of 16 patients with hallux valgus (HV group), and 16 feet of 11 patients with hallux rigidus (HR group). First, nonweightbearing foot CT imaging was performed in the supine position on a loading device with no load applied, with the legs extended and the ankle in the neutral position. Next, a load equivalent to body weight was applied for weightbearing CT imaging. Distal bone displacement relative to the proximal bone was quantified three-dimensionally under both conditions. RESULTS: In the HV group, the talonavicular joint showed significantly greater eversion (P = 00.011) compared with the control group and significantly greater dorsiflexion (P = 00.027) and eversion (P < 00.01) compared with the HR group. In the medial cuneiform joint, the HV group showed significantly greater eversion (P < 00.01) and abduction (P = 00.011) than the control group. For the first tarsometatarsal joint, the HV group showed significantly greater dorsiflexion (P = 00.014), inversion (P = 00.028), and adduction (P < 00.01) than the control group, and greater inversion (P < 00.01) and adduction (P < 00.01) than the HR group. Dorsiflexion of the first tarsometatarsal joint was significantly greater in the HR group compared with the control group (P = 00.026). CONCLUSION: Hypermobility of the first ray appears to be three-dimensional: in hallux valgus, it is centered at the first tarsometatarsal joint, while in hallux rigidus it is mainly in the sagittal plane at the first tarsometatarsal joint only. This difference may explain the different deformities ultimately observed in each condition.

Medial sesamoid position in moderate to severe hallux valgus: Correlation between three radiographic measurements.

BACKGROUND: In hallux valgus surgery, it is essential to accurately assess the position of the sesamoids both pre- and postoperatively. Weight-bearing foot anteroposterior, tangential sesamoid, and semi-weight-bearing computed tomography axial views are radiographic methods used to assess the medial sesamoid position. This study aimed to measure the medial sesamoid position and evaluate the correlation between these three radiographic methods. METHODS: This retrospective study comprised 59 feet from 49 patients who underwent hallux valgus surgery. The mean age of patients was 54.6 (range, 22-70) years. We took preoperative and postoperative measurements using the weight-bearing anteroposterior, tangential sesamoid, and semi-weight-bearing computed tomography axial views to assess the medial sesamoid position. RESULTS: The mean grades of the medial sesamoid position preoperatively and 6 months postoperatively were 2.5 and 0.8, 1.6 and 0.4, and 1.3 and 0.3 points based on the anteroposterior, tangential sesamoid, and computed tomography axial views, respectively (P < 0.001). Preoperatively, there was a strong positive correlation between the computed tomography axial and tangential sesamoid views (P < 0.001, r = 0.645) and anteroposterior and computed tomography axial views (P < 0.001, r = 0.468). In contrast, the tangential sesamoid and anteroposterior views showed a weak positive correlation (P = 0.03, r = 0.283). Six months postoperatively, there was a positive correlation between the computed tomography axial and tangential sesamoid views (P < 0.001, r = 0.473), anteroposterior and computed tomography axial views (P < 0.001, r = 0.470), and tangential sesamoid and anteroposterior views (P < 0.001, r = 0.480). CONCLUSIONS: We observed that the anteroposterior view exhibited a higher degree of medial sesamoid position displacement than the computed tomography axial and tangential sesamoid views. For the preoperative evaluation of the medial sesamoid position, the correlation between the computed tomography axial and tangential sesamoid views was stronger than that between the tangential sesamoid and anteroposterior views. However, all three views showed strong correlations postoperatively.

Relationship between first tarsometatarsal ligament morphology and its continuity with the fibularis longus and first tarsometatarsal joint degeneration.

This study explored the relationship between the morphological characteristics of the first tarsometatarsal ligaments and fibularis longus (FL) and the severity of articular cartilage degeneration in the first tarsometatarsal joint. Sixty legs from 30 cadavers were examined. The plantar, dorsal, and medial first tarsometatarsal ligaments were classified by fiber bundle number, and their morphological characteristics (fiber bundle length, width, thickness) were measured. The FL was categorized by its continuity with the plantar first tarsometatarsal ligament (PTML): Type A, connection with the PTML only on the first metatarsal; Type B, connection along the entire PTML; and Type C, no connection with the PTML. The severity of articular cartilage degeneration was assessed in four stages. No significant differences in cartilage degeneration among ligament types were found. Negative correlations were observed between the fiber bundle width and thickness of the PTML and the severity of cartilage degeneration. FL was classified as Type A in 68%, Type B in 27%, and Type C in 5% of feet. The fiber bundle thickness of the PTML in Type B was greater than in other types. Our findings suggest that smaller fiber bundle width and thickness in the PTML may be associated with severe cartilage degeneration. The FL had continuity with the PTML in 95% of feet and could enhance the mechanical strength of the PTML in Type B feet.

A comparison of three techniques for the osteosynthesis after minimal invasive osteotomies for hallux valgus.

PURPOSE: Third and fourth-generation minimal invasive osteotomies (MIO) for the treatment of hallux valgus (HV) have become popular procedures worldwide with promising results due to the improvement in the fixation method. The tricortical cannulated screw placement remains a complex procedure that is technically challenging and requires a long skill learning curve with high radiation exposure mainly in the form of intensifier shots (IS) required for the MIO fixation. This study aims to compare the number of X-ray IS required using three different techniques for the cannulated guide placement. METHODS: A retrospective cross-sectional observational and comparative study was conducted to assess the number of X-rays IS required for correct cannulated screw guide placement using three different techniques: traditional perforator, the drill and joystick, and K-wire first techniques. RESULTS: A total of 53 MIS procedures from thirty-one patients in two different hospitals were included. IS X-rays were 155.1 ± 29.7 in the traditional technique (n = 14), 143.0 ± 43.2 in the drill and joystick technique (n = 22), and 85 ± 18.7 in the K-wires first technique (n = 17), p = < 0.001 using one-way ANOVA. CONCLUSIONS: The K-wire first technique statistically significantly decreases X-ray IS numbers p ≤ 0.001. There were no statistically significant differences between the traditional (after osteotomy K-wire placement) and the drill and joystick techniques (p = 0.36).

Is there a tolerance for extension of the first metatarsal after the Lapidus procedure? A clinical, functional, and hindfoot radiographic analysis.

PURPOSE: Based on the tripod concept of load distribution, our study aimed to evaluate whether a slight extension of first metatarsal (M1) that may occur after the Lapidus procedure (LP) could alter the radiographic measurements of the hindfoot and influence clinical and functional outcomes. METHODS: Twenty-five patients (27 feet) were reviewed. Hindfoot radiographic analysis was based on seven measurements. Clinical and functional outcomes were evaluated with self-reported questionnaires. Transfer metatarsalgia was also assessed. Correlation analysis was performed according to variations of the studied variables. RESULTS: The average extension of the M1 was 4.26 degrees (p < 0.001). None of the hindfoot radiographic measurements changed significantly (p = 0.13, p = 0.50, p = 0.19, p = 0.70, p = 0.11, p = 0.36, p = 0.83). Patients improved on most questionnaires (p < 0.001). None presented transfer metatarsalgia. No correlation between M1 extension and clinical and functional outcomes was found. CONCLUSION: Possibly there is a tolerance of M1 extension in which it does not alter the radiographic measurements of the hindfoot, overload the lesser metatarsals, or compromise clinical and functional outcomes.

Percutaneous distal chevron osteotomy is associated with lower immediate postoperative pain and a greater range of motion than the open technique: A prospective randomized study.

PURPOSE: The results of past studies comparing percutaneous techniques with traditional open techniques for hallux valgus are controversial. Therefore, this study aimed to compare the radiologic and clinical outcomes of percutaneous and open distal chevron osteotomies. METHODS: Seventy-one patients with mild to severe hallux valgus deformity were randomized to undergo percutaneous distal chevron osteotomy (percutaneous group, n = 36) or open distal chevron osteotomy (open group, n = 35) between October 2019 and September 2020. Radiological and clinical outcomes were assessed preoperatively and postoperatively. Outcome measures included the foot and ankle outcome score, foot functional index, visual analogue scale (VAS) scores for pain, range of motion (ROM) of the first metatarsophalangeal (MTP) joint, hallux valgus angle, intermetatarsal angle, and first metatarsal shortening. Additionally, the first metatarsal declination angle was measured to evaluate sagittal malunion. RESULTS: The mean first metatarsal declination angle decreased significantly at 12 months postoperatively in both groups (p = 0.021 and p < 0.001 in the percutaneous and open groups, respectively), and the decrement was significantly greater in the open group (p = 0.033). The mean VAS score for pain on postoperative day one was 4.2 ± 1.9 and 5.3 ± 1.7 in the percutaneous and open groups, respectively (p = 0.019). The mean ROM of the first MTP joint did not change significantly after surgery, from 72.5 ± 7.5 preoperatively to 71.0 ± 9.5 at 12 months postoperatively in the percutaneous group (p = 0.215); however, it decreased significantly from 70.6 ± 7.3 preoperatively to 63.4 ± 10.4 at 12 months postoperatively in the open group (p < 0.001). There were no significant differences between the groups regarding other clinical outcomes. CONCLUSION: The percutaneous group showed a lower immediate pain level at postoperative day 1 and better ROM of the first MTP joint at 12 months postoperatively.

Outcome comparison of minimally invasive proximal and distal chevron Akin osteotomies in patients with severe hallux valgus deformity: A randomized prospective study.

PURPOSE: To date, the surgical treatment of severe hallux valgus deformity remains challenging despite the various methods presented. This study aimed to compare the effectiveness of minimally invasive distal chevron Akin osteotomies (d-MICA) and minimally invasive proximal chevron Akin osteotomies (p-MICA) in correcting severe hallux valgus deformities. METHODS: This prospective follow-up study included patients randomly assigned to undergo p-MICA or d-MICA for hallux valgus deformities with a preoperative hallux valgus angle (HVA) ≥ 40° and/or a first to second intermetatarsal angle (IMA) ≥ 16°. After a minimum follow-up period of two years, we compared various clinico-radiographic parameters of patients whose HVA exceeded 15° at the final follow-up. RESULTS: In the p-MICA and d-MICA groups, seven of 40 cases (17.5%) and 16 of 41 cases (39.0%), respectively, exhibited HVA > 15° at the final follow-up (P = 0.048). The preoperative parameters showed no significant differences. However, at the first weight-bearing assessment, the HVA, IMA, and relative second metatarsal length were significantly smaller, and the distal metatarsal articular angle (DMAA) was greater in the p-MICA group (all P < 0.05) compared with the d-MICA group. Postoperatively, both groups exhibited significant decreases in HVA and IMA at the final follow-up (P < 0.001 for all parameters). The p-MICA group showed no significant changes in DMAA and the relative length of the second metatarsal (P = 0.253 and 0.185, respectively). However, the d-MICA group showed a significant decrease in DMAA (P < 0.001) and an increase in the relative length of the second metatarsal at the final follow-up (P = 0.01). CONCLUSIONS: p-MICA and d-MICA procedures demonstrated effective correction potential for severe hallux valgus deformities; however, the d-MICA procedure exhibited a notably higher incidence of unsatisfactory correction at the final follow-up than p-MICA. Therefore, d-MICA may be less predictable in achieving successful outcomes than p-MICA in treating severe hallux valgus deformities.

Minimally invasive hallux valgus surgery using 3D printed patient specific instrumentation.

In this technical report study, we describe technique for performing the osteotomy and screw passage in minimally invasive fourth-generation hallux valgus surgery with transverse and akin extra-articular metaphyseal osteotomy (META) using a 3D-printed patient-specific surgical instrumentation guide. In an effort to minimize the learning curve and address the variability associated with technical corrections and screw placement, we have initiated the creation of personalized patient-specific instrumentation guides using 3D printing. Our hypothesis is that this approach will enhance safety, precision, decrease surgical time, and reduce exposure to radiation. Level of Evidence: Level V, expert opinion.

The effect of hallux valgus on the anatomy of the nerves around the first metatarsal bone.

OBJECTIVE: To identify the variations in the location of the nerves that may be at risk in hallux valgus (HV) surgery, and to reveal whether these nerves are affected by the anatomical changes associated with HV. METHOD: In the formalin fixed, 46 lower extremities (19 female, 27 male) (9 normal, 14 mild HV, 21 moderate/severe HV), extensor hallucis longus tendon (EHL), deep plantar artery, medial dorsal cutaneous (MDCN), deep fibular (DFN), common plantar digital (CPDN) and proper plantar digital (PPDN) nerves were examined. The branches of MDCN extending to the medial side of foot were recorded in three segments. The positional topography of nerves according to EHL were analyzed on 360° circle and clock models. RESULTS: Sex-related differences observed in some parameters in direct measurements were not found in the clock model comparisons. In advanced HV angles (> 20°), DFN was closer to EHL in the distal part of the metatarsal bone, while there was no difference in the proximal. The intersection of the medial branch of the MDCN with the EHL was more proximal in HV cases than in normal feet. The location of the nerves in the clock pattern did not change in HV. Of the nerve branches reaching the medial side of the foot, 65.2% were in Part I, 71.7% in Part II, and 4.3% in Part III. CONCLUSION: Sex differences in the distance of the nerves to the EHL disappeared when the size effect of the cross-section of the first metatarsal bone region was eliminated with the clock model. Only in advanced HVA (>20°) (not in mild HV), the DFN being closer to the EHL distally and the intersection of the medial branch of the MDCN with the EHL in HV being more proximal than in normal can be interpreted as specific reflections of HV progress. The variations we revealed in the number of branches reaching the inside of the foot may explain the diversity of neuromas or nerve injuries associated with HV surgery.

ACFAS Clinical Consensus Statements: Hallux Rigidus.

The following are clinical consensus statements (CCS) on the topic of Hallux Rigidus sponsored by the American College of Foot and Ankle Surgeons. A core panel synthesized the data and divided the topic in to twelve sections, each section contained a variable number of consensus statements, based upon complexity. Overall there were 24 consensus statements synthesized for this subject matter. The 24 statements were provided to the expert panel with all available evidence to come to a consensus utilizing all available evidence.

First Metatarsophalangeal Joint Arthrodesis With Complete Resection of the Subchondral Bone Plate.

First metatarsophalangeal arthrodesis is associated with high union rates but there is a wide range of union incidence reported. Whether the subchondral plate is completely resected, is not reported by individual studies and without meticulous care, there is often residual subchondral plate. The primary aim was to report our union rate following first metatarsophalangeal arthrodesis with complete resection of the subchondral plate, locking plate fixation and immediate protected weight bearing. A retrospective case study of 2 surgeons was performed from August 2016 to June 2023. Our study was unique in that all patients had complete resection of the subchondral plate to trabecular bone. One hundred seventeen feet were identified for analysis, in 112 patients following exclusion criteria. Patients were excluded if they had less than 3 months follow-up, revisional surgery or charcot. Demographic data and indications for the procedure were reported. A single construct locking plate with an interfragmentary compression screw through the plate was used in 37 feet and a locking plate with separate interfragmentary compression screw was used in 80 feet. We reported a nonunion incidence of 0.9% (n = 1) with a delayed union incidence of 0.9% (n = 1) and a broken hardware incidence of 0.9% (n = 1). Complete resection of subchondral plate with early weight bearing and locking plate fixation had a high union rate for first metatarsophalangeal arthrodesis. Our results compare favorably with union rates in the literature, where there is often residual subchondral plate.

Foot Surgery Using Resorbable Magnesium Screws.

The use of bioabsorbable magnesium (Mg) screws is new in foot surgery. Their relative merit over conventional titanium screws has not yet been proven. This prospective case series study was conducted to compare the clinical and radiological outcomes of bioabsorbable Mg screws and titanium screws. A consecutive series of patients (n = 60; 11 men and 49 women) underwent corrective hallux valgus surgery. The minimum follow-up period was 1 year. The assessment was based on a patient questionnaire, including the American Orthopedic Foot and Ankle Society (AOFAS) hallux valgus score, visual analog scale, patient's global impression of change (PGIC), and fifth metatarsus circumference (IF5C). The radiographic assessment included the intermetatarsal and hallux valgus angles, as well as time to osteotomy union and hardware failure. At 1 year, similar results were obtained radiographically. The healing of the osteotomies was significantly faster in the Mg group. Hardware failure was common in the Mg group (5/26) than in the TI group (0/34) but hardware removal was more common in the TI group (6/34) versus the MG group (0/26). IF5C increased by 8 ± 2 mm in the Mg group. The AOFAS and PGIC scores at 6 months were similar. Validated foot scores and radiographic analysis indicated that there was no detectable difference between the groups. The fast achievement of osteotomy union compensates for a high rate of hardware failure, resulting in patient satisfaction and avoiding reoperation for hardware removal.

Immediate Weightbearing Following First Metatarsal Phalangeal Joint Arthrodesis With 2 Nickel Titanium Alloy Staples.

The use of staples has been shown to be a reasonable fixation technique to achieve stability of a first MTPJ arthrodesis. Although it has been shown to be a weaker construct than crossed screws or plate and screw combinations, their ease of insertion, low profile, and stability make them a desirable choice for first MTPJ arthrodesis fixation. However, because of this relative weakness, the question remains whether immediate weightbearing when using staples is advisable. The aim of this study is to determine whether the use of 2 nickel-titanium alloy (NITINOL) staples, placed at 90 degrees to one another is a stable enough construct to support full, immediate weightbearing following first MTPJ arthrodesis. We performed a retrospective chart review of patients undergoing first MTPJ arthrodesis by a single surgeon utilizing 2 NITINOL staples placed at 90 degrees to one another. Patients were allowed to be fully weightbearing immediately postoperatively. Forty-seven of 50 (94%) patients achieved complete radiologic consolidation of fusion at 12 weeks, with only 3 requiring revision surgery for nonunion. All of the patients requiring revision surgery for nonunion, had preoperative diagnosis of hallux abducto valgus. We concluded that the use of 2 NITINOL staples placed at 90 degrees to one another is a viable option for first MTPJ arthrodesis, and immediate weightbearing does not increase rate of nonunion or incidence of revision surgery when compared to other fixation techniques.