Intrinsic Water Transport in Moisture-Capturing Hydrogels.

Moisture-capturing hydrogels have emerged as attractive sorbent materials capable of converting ambient humidity into liquid water. Recent works have demonstrated exceptional water capture capabilities of hydrogels while simultaneously exploring different strategies to accelerate water capture and release. However, on the material level, an understanding of the intrinsic transport properties of moisture-capturing hydrogels is currently missing, which hinders their rational design. In this work, we combine absorption and desorption experiments of macroscopic hydrogel samples in pure vapor with models of water diffusion in the hydrogels to demonstrate the first measurements of the intrinsic water diffusion coefficient in hydrogel-salt composites. Based on these insights, we pattern hydrogels with micropores to significantly decrease the required absorption and desorption times by 19% and 72%, respectively, while reducing the total water capacity of the hydrogel by only 4%. Thereby, we provide an effective strategy toward hydrogel material optimization, with a particular significance in pure-vapor environments.

Microscopic and submicroscopic exploration of diplolepideae peristome structures in hygroscopic movement.

BACKGROUND: The Diplolepideae are the larger group within the Arthrodontae mosses, characterized by peristomes formed from residual cell walls. It is now understood that these peristomes exhibit diverse hygroscopic movements, playing a crucial role in spore release. However, the exact mechanism behind this movement remains unclear, lacking direct evidence. This study investigated the microscopic and submicroscopic structures of the peristomes in three Diplolepideae species: Hypopterygium fauriei (Besch.), Pylaisia levieri (Müll. Hal.) Arikawa and Regmatodon declinatus (Hook.) Brid. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to reveal the differences in their hygroscopic movement mechanisms. RESULTS: The three species exhibited distinct responses upon wetting: H. fauriei's exostome closed inwards, P. levieri' opened outwards, and R. declinatus' elongated significantly. These differences are attributed to the varying microfibril deposition in the exostome layers. Uniform deposition in the inner layer and minimal deposition in the outer layer enabled exostome opening upon wetting and closing when dry. Our findings suggest that the diastole and contraction of fine microfibrils in the exostome plates and ridges are the key drivers of hygroscopic movement. CONCLUSIONS: This study provides further evidence at both the structural and submicroscopic levels, contributing to the unraveling of the hygroscopic movement mechanism in Diplolepideae peristomes. This enhanced understanding sheds light on the relationship between peristome structure and function.

A Super-Hygroscopic Solar-Regenerated Alginate-Based Composite for Atmospheric Water Harvesting.

Global water scarcity is leading to increasingly tense competition across populations. In order to complement the largely fast-depleting fresh water sources and mitigate the challenges generated by brine discharge from desalination, atmospheric water harvesting (AWH) has emerged to support long-term water supply. This work presents a novel alginate-based hybrid material comprised of porous silico-aluminophosphate-34 (SAPO-34) as fast-transport channel medium as well as hydrophilicity and stability enhancer, and graphene-based sheets as light absorber for solar-enabled evaporation, both optimally incorporated in an alginate matrix, resulting in a composite sorbent capable of harvesting water from the atmosphere with a record intake of up to 6.85 gw gs -1. Natural sunlight is solely used to enable desorption achieving increase of the temperature of the developed network up to 60 °C and resulting in release of the sorbed water, with impurities content well below the World Health Organization (WHO) upper limits. After 30 cycles of sorption and desorption, the composite hydrogel displayed unchanged water uptake and stability. This work provides an impactful perspective toward sustainable generation of water from humidity without external energy consumption supporting the emergence of alternative water production solutions.

Bioinspired H-Bonding Connected Gradient Nanostructure Actuators Based on Cellulose Nanofibrils and Graphene.

The construction of flexible actuators with ultra-fast actuation and robust mechanical properties is crucial for soft robotics and smart devices, but still remains a challenge. Inspired by the unique mechanism of pinecones dispersing seeds in nature, a hygroscopic actuator with interlayer network-bonding connected gradient structure is fabricated. Unlike most conventional bilayer actuator designs, the strategy leverages biobased polyphenols to construct strong interfacial H-bonding networks between 1D cellulose nanofibers and 2D graphene oxide, endowing the materials with high tensile strength (172 MPa) and excellent toughness (6.64 MJ m-3). Furthermore, the significant difference in hydrophilicity between GO and rGO, along with the dense interlayer H-bonding, enables ultra-fast water exchange during water absorption and desorption processes. The resulted actuator exhibits ultra-fast driving speed (154° s-1), excellent pressure-resistant and cyclic stability. Taking advantages of these benefits, the actuator can be fabricated into smart devices (such as smart grippers, humidity control switches) with significant potential for practical applications. The presented approach to constructing interlayer H-bonding in gradient structures is instructive for achieving high performance and functionalization of biomass nanomaterials and the complex of 1D/2D nanomaterials.

A Functionally Asymmetric Janus Hygro-Photothermal Hybrid for Atmospheric Water Harvesting in Arid Regions.

Metal-organic frameworks (MOFs) are high-performance adsorbents for atmospheric water harvesting but have poor water-desorption ability, requiring excess energy input to release the trapped water. Addressing this issue, a Janus-structured adsorbent with functional asymmetry is presented. The material exhibits contrasting functionalities on either face - a hygroscopic face interfaced with a photothermal face. Hygroscopic aluminum fumarate MOF and photothermal CuxS layers are in-situ grown on opposite sides of a Cu/Al bimetallic substrate, resulting in a CuxS-Cu/Al-MOF Janus hygro-photothermal hybrid. The two faces serve as independent "factories" for photothermal conversion and water adsorption-desorption respectively, while the interfacing bimetallic layer serves as a "heat conveyor belt" between them. Due to the high porosity and hydrophilicity of the MOF, the hybrid exhibits a water-adsorption capacity of 0.161 g g-1 and a fast adsorption rate (saturation within 52 min) at 30% relative humidity. Thanks to the photothermal CuxS, the hybrid can reach 71.5 °C under 1 Sun in 20 min and desorb 97% adsorbed water in 40 min, exhibiting a high photothermal conversion efficiency of over 90%. CuxS-Cu/Al-MOF exhibits minimal fluctuations after 200 cycles, and its water-generation capacity is 3.21 times that of powdery MOF in 3 h in a self-designed prototype in one cycle.

Methods for the induction of labor: efficacy and safety.

This review assessed the efficacy and safety of pharmacologic agents (prostaglandins, oxytocin, mifepristone, hyaluronidase, and nitric oxide donors) and mechanical methods (single- and double-balloon catheters, laminaria, membrane stripping, and amniotomy) and those generally considered under the rubric of complementary medicine (castor oil, nipple stimulation, sexual intercourse, herbal medicine, and acupuncture). A substantial body of published reports, including 2 large network meta-analyses, support the safety and efficacy of misoprostol (PGE1) when used for cervical ripening and labor induction. Misoprostol administered vaginally at doses of 50 µg has the highest probability of achieving vaginal delivery within 24 hours. Regardless of dosing, route, and schedule of administration, when used for cervical ripening and labor induction, prostaglandin E2 seems to have similar efficacy in decreasing cesarean delivery rates. Globally, although oxytocin represents the most widely used pharmacologic agent for labor induction, its effectiveness is highly dependent on parity and cervical status. Oxytocin is more effective than expectant management in inducing labor, and the efficacy of oxytocin is enhanced when combined with amniotomy. However, prostaglandins administered vaginally or intracervically are more effective in inducing labor than oxytocin. A single 200-mg oral tablet of mifepristone seems to represent the lowest effective dose for cervical ripening. The bulk of the literature assessing relaxin suggests this agent has limited benefit when used for this indication. Although intracervical injection of hyaluronidase may cause cervical ripening, the need for intracervical administration has limited the use of this agent. Concerning the vaginal administration of nitric oxide donors, including isosorbide mononitrate, isosorbide, nitroglycerin, and sodium nitroprusside, the higher incidence of side effects with these agents has limited their use. A synthetic hygroscopic cervical dilator has been found to be effective for preinduction cervical ripening. Although a pharmacologic agent may be administered after the use of the synthetic hygroscopic dilator, in an attempt to reduce the interval to vaginal delivery, concomitant use of mechanical and pharmacologic methods is being explored. Combining the use of a single-balloon catheter with dinoprostone, misoprostol, or oxytocin enhances the efficacy of these pharmacologic agents in cervical ripening and labor induction. The efficacy of single- and double-balloon catheters in cervical ripening and labor induction seems similar. To date, the combination of misoprostol with an intracervical catheter seems to be the best approach when balancing delivery times with safety. Although complementary methods are occasionally used by patients, given the lack of data documenting their efficacy and safety, these methods are rarely used in hospital settings.

Hygroscopic Growth of Adsorbed Water Films on Smectite Clay Particles.

Hygroscopic growth of adsorbed water films on clay particles underlies a number of environmental science questions, from the air quality and climate impacts of mineral dust aerosols to the hydrology and mechanics of unsaturated soils and sedimentary rocks. Here, we use molecular dynamics (MD) simulations to establish the relation between adsorbed water film thickness (h) and relative humidity (RH) or disjoining pressure (Π), which has long been uncertain due to factors including sensitivity to particle shape, surface roughness, and aqueous chemistry. We present a new MD simulation approach that enables precise quantification of Π in films up to six water monolayers thick. We find that the hygroscopicity of phyllosilicate mineral surfaces increases in the order mica < K-smectite < Na-smectite. The relationship between Π and h on clay surfaces follows a double exponential decay with e-folding lengths of 2.3 and 7.5 Å. The two decay length scales are attributed to hydration repulsion and osmotic phenomena in the electrical double layer (EDL) at the clay-water interface.

A Polyzwitterionic@MOF Hydrogel with Exceptionally High Water Vapor Uptake for Efficient Atmospheric Water Harvesting.

Atmospheric water harvesting (AWH) is considered a promising strategy for sustainable freshwater production in landlocked and arid regions. Hygroscopic salt-based composite sorbents have attracted widespread attention for their water harvesting performance, but suffer from aggregation and leakage issues due to the salting-out effect. In this study, we synthesized a PML hydrogel composite by incorporating zwitterionic hydrogel (PDMAPS) and MIL-101(Cr) as a host for LiCl. The PML hydrogel was characterized using various techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and thermogravimetric analysis (TGA). The swelling properties and water vapor adsorption-desorption properties of the PML hydrogel were also assessed. The results demonstrate that the MIL-101(Cr) was uniformly embedded into PDMAP hydrogel, and the PML hydrogel exhibits a swelling ratio of 2.29 due to the salting-in behavior. The PML hydrogel exhibited exceptional water vapor sorption capacity of 0.614 g/g at 298 K, RH = 40% and 1.827 g/g at 298 K, RH = 90%. It reached 80% of its saturated adsorption capacity within 117 and 149 min at 298 K, RH = 30% and 90%, respectively. Additionally, the PML hydrogel showed excellent reversibility in terms of water vapor adsorption after ten consecutive cycles of adsorption-desorption. The remarkable adsorption capacity, favorable adsorption-desorption rate, and regeneration stability make the PML hydrogel a potential candidate for AWH. This polymer-MOF synergistic strategy for immobilization of LiCl in this work offers new insights into designing advanced materials for AWH.

Investigating the effect of volatility on the hygroscopicities of acetate nanoparticle aerosols by surface plasmon resonance microscopy.

Under high relative humidity (RH) conditions, the release of volatile components (such as acetate) has a significant impact on the aerosol hygroscopicity. In this work, one surface plasmon resonance microscopy (SPRM) measurement system was introduced to determine the hygroscopic growth factors (GFs) of three acetate aerosols separately or mixed with glucose at different RHs. For Ca(CH3COO)2 or Mg(CH3COO)2 aerosols, the hygroscopic growth trend of each time was lower than that of the previous time in three cyclic humidification from 70% RH to 90% RH, which may be due to the volatility of acetic acid leading to the formation of insoluble hydroxide (Ca(OH)2 or Mg(OH)2) under high RH conditions. Then the third calculated GF (using the Zdanovskii-Stokes-Robinson method) for Ca(CH3COO)2 or Mg(CH3COO)2 in bicomponent aerosols with 1:1 mass ratio were 3.20% or 5.33% lower than that of the first calculated GF at 90% RH. The calculated results also showed that the hygroscopicity change of bicomponent aerosol was negatively correlated with glucose content, especially when the mass ratio of Mg(CH3COO)2 to glucose was 1:2, the GF at 90% RH only decreased by 4.67% after three cyclic humidification. Inductively coupled plasma atomic emission spectrum (ICP-AES) based measurements also indicated that the changes of Mg2+concentration in bicomponent was lower than that of the single-component. The results of this study reveal thatduring the efflorescence transitions of atmospheric nanoparticles, the organic acids diffusion rate may be inhibited by the coating effect of neutral organic components, and the particles aging cycle will be prolonged.

Room-Temperature Ripening Enabled by Hygroscopic Salts for Hole-conductor-free Printable Perovskite Solar Cells with Efficiency Over 20.

Solution-processed perovskite films generally possess small grain sizes and high density of grain boundaries, which intensify non-radiative recombination of carriers and limits the power conversion efficiency (PCE) of solar cells. In this study, we report the room-temperature ripening enabled by the synergy of hygroscopic salts and moisture in air for efficient hole-conductor-free printable mesoscopic perovskite solar cells (p-MPSCs). Treating perovskite films with proper hygroscopic salts in damp air induces obvious secondary recrystallization, which coarsens the grains size from hundreds of nanometers to several micrometers. It's proposed that the hygroscopic salt at grain boundaries could absorb moisture and form a complex which could not only serve as mass transfer channel but also assist in the dissolution of perovskite grains. This activates mass transfer between small grains and large grains since they possess different solubilities, and thus ripens the perovskite film. Consequently, p-MPSCs treated with the hygroscopic salt of NH4SCN show an improved power conversion efficiency of 20.13% from 17.94%, and maintain >98% of the initial efficiency under maximum power point tracking at 55±5°C for 350 hours.

Longitudinal Ultrasound Evaluation of Dilapan-S During Cervical Ripening.

OBJECTIVE: To assess the diameter change of hygroscopic rod dilation during 12 hours of cervical ripening. METHODS: This was an observational, prospective study of term women undergoing labor induction with a bishop score ≤ 6. Women were allocated into two groups (soaked gauze or no gauze) stratified by parity. Using transvaginal ultrasound, maximal rod diameters were obtained in a longitudinal plane. Measurements were taken at four pre-specified time points (3, 6, 8, and 12 hours). All rods were removed at 12 hours from insertion. Patient satisfaction scores between the groups were assessed. To evaluate if measures were significantly different among the four time points, a generalized linear model was used. Independent t-tests were used to compare mean rod diameter values and pain measures between the two groups. Fisher Exact tests were used to evaluate categorical satisfaction measures. RESULTS: Forty-four women were recruited with a total of 178 hygroscopic rods placed. Mean rod diameters (mm) were significantly different among the four time periods (3 hour: 7.9 mm [SD 0.9]; 6 hour: 9.4 mm [SD 0.9]; 8 hour: 10.0 mm [SD 0.9]; 12 hour: 10.9 mm [SD 0.8]; P-value <.001). After stratifying by the use of gauze, there was no difference in rod diameters at 3, 6, 8, and 12 hours respectively. There was no difference in patient satisfaction scores between the two groups. CONCLUSION: The majority of hygroscopic rod dilation occurs within the first 8 hours of cervical ripening. Placement of saturated gauze does not accelerate rod dilation.

Atmospheric Particle Hygroscopicity and the Influence by Oxidation State of Organic Aerosols in Urban Beijing.

A hygroscopic tandem differential mobility analyser (H-TDMA) was used to observe the size-resolved hygroscopic characteristics of submicron particles in January and April 2018 in urban Beijing. The probability distribution of the hygroscopic growth factor (HGF-PDF) in winter and spring usually showed a bimodal pattern, with more hygroscopic mode (MH) being more dominant. The seasonal variation in particle hygroscopicity was related to the origin of air mass, which received polluted southerly air masses in spring and clean northwesterly air masses in winter. Particles showed stronger hygroscopic behaviour during heavy pollution episodes (HPEs) with elevated concentrations of secondary aerosols, especially higher mass fraction of nitrate, which were indicated using the PM2.5 (particulate matter with diameter below 2.5 µm) mass concentration normalised by CO mass concentration. The hygroscopic parameter (κ) values were calculated using H-TDMA (κhtdma) and chemical composition (κchem). The closure study showed that κchem was overestimated in winter afternoon when compared with κhtdma, because the organic particle hygroscopic parameter (κorg) was overestimated in the calculations. It was influenced by the presence of a high concentration of hydrocarbon-like organic aerosol (HOA) with a weak water uptake ability. A positive relationship was observed between κorg and the ratio of oxygenated organic aerosol (OOA) and HOA, thereby indicating that the strong oxidation state enhanced the hygroscopicity of the particles. This study revealed the effect of local emission sources and secondary aerosol formation processes on particle hygroscopicity, which is of great significance for understanding the pollution formation mechanism in the North China Plain.

Retrieval of refractive index of ultrafine single particle using hygroscopic growth factor obtained by high sensitive surface plasmon resonance microscopy.

When exposed to different relative humidities (RHs), the optical properties of atmospheric aerosols will change because of changes in the aerosol particle size and complex refractive index (RI), which will affect haze formation and global climate change. The potential contributions of ultrafine particles to the atmospheric optical characteristics and to haze spreading cannot be ignored because of their high particle number concentrations and strong diffusibility; measurement of the optical properties of wet ultrafine particles is thus highly important for environmental assessment. Therefore, a surface plasmon resonance microscopy with azimuthal rotation illumination (SPRM-ARI) system is designed to determine the RIs of single particle aerosols with diameters of less than 100 nm in the hygroscopic growth process. Measurements are taken using mixed single particles with different mass ratios. The RIs of mixed single aerosols at different RHs are retrieved by measuring the scattering light intensity using the SPRM-ARI system and almost all the RIs of the bicomponent particles with different mass ratios decrease with increasing water content under high RH conditions. Finally, for each of the bicomponent particles, the maximum standard deviations for the retrieved RI values are only 2.06×10-3, 3.08×10-3 and 3.83×10-3, corresponding to the NaCl and NaNO3 bicomponent particles with a 3:1 mass ratio at 76.0% RH, the NaCl and glucose particles with a 1:3 mass ratio at 89.0% RH, and the NaCl and OA particles with a 1:1 mass ratio at 78.0% RH, respectively; these results indicate that the high-sensitivity SPRM-ARI system can measure the RI effectively and accurately.

Recent Development of Moisture-Enabled-Electric Nanogenerators.

Power generation by converting energy from the ambient environment has been considered a promising strategy for developing decentralized electrification systems to complement the electricity supply for daily use. Wet gases, such as water evaporation or moisture in the atmosphere, can be utilized as a tremendous source of electricity by emerging power generation devices, that is, moisture-enabled-electric nanogenerators (MEENGs). As a promising technology, MEENGs provided a novel manner to generate electricity by harvesting energy from moisture, originating from the interactions between water molecules and hydrophilic functional groups. Though the remarkable progress of MEENGs has been achieved, a systematic review in this specific area is urgently needed to summarize previous works and provide sharp points to further develop low-cost and high-performing MEENGs through overcoming current limitations. Herein, the working mechanisms of MEENGs reported so far are comprehensively compared. Subsequently, a systematic summary of the materials selection and fabrication methods for currently reported MEENG construction is presented. Then, the improvement strategies and development directions of MEENG are provided. At last, the demonstrations of the applications assembled with MEENGs are extracted. This work aims to pave the way for the further MEENGs to break through the performance limitations and promote the popularization of future micron electronic self-powered equipment.

Reversible Hydration Composite Films for Evaporative Perspiration Control and Heat Stress Management.

Donning of personal protective equipment (PPE) in the healthcare sector has been intensified by the on-going COVID-19 pandemic around the globe. While extensive PPE provides protection, it typically limits moisture permeability and severely hinders the sweat evaporation process, resulting in greater heat stress on the personnel. Herein, a zinc-poly(vinyl alcohol) (Zn-PVA) composite film is fabricated by embedding a super-hygroscopic zinc-ethanolamine complex (Zn-complex) in the PVA matrix. By attaching the Zn-PVA composite film, the relative humidity (RH) inside the protective suit decreases from 91.0% to 48.2%. The reduced RH level, in turn, enhances evaporative cooling, hence bringing down the heat index from 64.6 to 40.0 °C at an air temperature of 35 °C, remarkably lowering the likelihood of heat stroke. The American Society for Testing and Materials tests conducted on a sweating manikin have also proven that the Zn-PVA composite films can significantly reduce the evaporative resistance of the protective suit by 90%. The low material cost, facile fabrication process, and reusability allow the Zn-PVA composition films to be readily available for healthcare workers worldwide. This application can be further extended to other occupations that are facing severe thermal discomfort and heat stress.

Fern fronds that move like pine cones: humidity-driven motion of fertile leaflets governs the timing of spore dispersal in a widespread fern species.

BACKGROUND AND AIMS: The sensitive fern, Onoclea sensibilis, is a widespread species in eastern North America and has an atypical timing of spore dispersal among temperate ferns. During early summer, this dimorphic species produces heavily modified spore-bearing fronds with leaflets tightly enveloping their sporangia and spores. These fronds senesce and persist above ground as dead mature structures until the following early spring when the leaflets finally open and spores are dispersed. While this timing of spore dispersal has been observed for over 120 years, the structural mechanisms underpinning this phenology have remained elusive. METHODS: Based on field observations, growth chamber manipulations and scanning electron microscopy, the mechanisms underlying this distinctive timing of spore dispersal in the sensitive fern were investigated. KEY RESULTS: I show that fertile leaflets of the sensitive fern move in direct response to changes in humidity, exhibiting structural and functional parallels with multicellular hygromorphic structures in seed plants, such as pine cones. These parallels include differences in cellulose microfibril orientation in cells on the abaxial and adaxial sides of the leaflet. The dynamics of this hygroscopic movement concomitant with regular abscission zones along the pinnules and coordinated senescence lead to the specific timing of early spring spore dispersal in the sensitive fern. CONCLUSIONS: While hygroscopic movement is common in seed-free plants, it mostly occurs in small structures that are either one or a few cells in size, such as the leptosporangium. Given its multicellular structure and integration across many cells and tissues, the movement and construction of the sensitive fern pinnules are more similar to structures in seed plants. The evolution of this complex trait in the sensitive fern efficiently regulates the timing of spore release, leading to early spring dispersal. This phenology likely gives gametophytes and subsequent sporophytes an advantage with early germination and growth.

Digitized collections elucidate invasion history and patterns of awn polymorphism in Microstegium vimineum.

PREMISE: Digitized collections can help illuminate the mechanisms behind the establishment and spread of invasive plants. These databases provide a record of traits in space and time that allows for investigation of abiotic and biotic factors that influence invasive species. METHODS: Over 1100 digitized herbarium records were examined to investigate the invasion history and trait variation of Microstegium vimineum. Presence-absence of awns was investigated to quantify geographic patterns of this polymorphic trait, which serves several functions in grasses, including diaspore burial and dispersal to germination sites. Floret traits were further quantified, and genomic analyses of contemporary samples were conducted to investigate the history of M. vimineum's introduction and spread into North America. RESULTS: Herbarium records revealed similar patterns of awn polymorphism in native and invaded ranges of M. vimineum, with awned forms predominating at higher latitudes and awnless forms at lower latitudes. Herbarium records and genomic data suggested initial introduction and spread of the awnless form in the southeastern United States, followed by a putative secondary invasion and spread of the awned form from eastern Pennsylvania. Awned forms have longer florets, and floret size varies significantly with latitude. There is evidence of a transition zone with short-awned specimens at mid-latitudes. Genomic analyses revealed two distinct clusters corresponding to awnless and awned forms, with evidence of admixture. CONCLUSIONS: Our results demonstrate the power of herbarium data to elucidate the invasion history of a problematic weed in North America and, together with genomic data, reveal a possible key trait in introduction success: presence or absence of an awn.

Nanomechanics and Morphology of Simulated Respiratory Particles.

The impact of respiratory particle composition on the equilibrium morphology and phase is not well understood. Furthermore, the effects of these different phases and morphologies on the viability of viruses embedded within these particles are equally unknown. Physiologically relevant respiratory fluid analogues were constructed, and their hygroscopic behavior was measured using an ensemble technique. A relationship between hygroscopicity and protein concentration was determined, providing additional validation to the high protein content of respiratory aerosol measured in prior works (>90%). It was found that the salt component of the respiratory particles could crystallize as a single crystal, multiple crystals, or would not crystallize at all. It was found that dried protein particles at indoor-relevant climatic conditions could exist separately in a glassy (∼77% of particles) or viscoelastic state (∼23% of particles). The phase state and morphology of respiratory particles may influence the viability of embedded pathogens. We recommend that pathogen research aiming to mimic the native composition of respiratory fluid should use a protein concentration of at least 90% by solute volume to improve the representativity of the pathogen's microenvironment.

Deposition potential of 0.003-10 µm ambient particles in the humidified human respiratory tract: Contribution of new particle formation events in Beijing.

Ultrafine particles (UFPs) usually explosive growth during new particle formation (NPF) events. However, the risk of exposure to UFPs on NPF days has been ignored due to the prevalence of mass-based air quality standards. In this study, the daily deposited doses, i.e., the daily deposited particle number dose (DPNd), mass dose (DPMd), and surface area dose (DPSd), of ambient particles in the human respiratory tract in Beijing were evaluated based on the particle number size distribution (3 nm-10 µm) from June 2018 to May 2019 utilizing a Multiple-Path Particle Dosimetry Model (MPPD) after the hygroscopic growth of particles in the respiratory tract had been accounted for. Our observations showed a high frequency (72.6%) of NPF on excellent air quality days, with daily mean PM2.5 concentrations less than 35 µg m-3. The daily DPNd on excellent air quality days was comparable with that on polluted days, although the DPMd on excellent air quality days was as low as 15.6% of that on polluted days. The DPNd on NPF days was ~1.3 times that on non-NPF days. The DPNd in respiratory tract regions decreased in the order: tracheobronchial (TB) > pulmonary (PUL) > extrathoracic (ET) on NPF days, while it was PUL > TB > ET on non-NPF days. The number of deposited nucleation mode particles, which were deposited mainly in the TB region (45%), was 2 times higher on NPF days than that on non-NPF days. Our results demonstrated that the deposition potential due to UFPs in terms of particle number concentrations is high in Beijing regardless of the aerosol mass concentration. More toxicological studies related to UFPs on NPF days, especially those targeting tracheobronchial and pulmonary impairment, are required in the future.

Influence of Fermentation Beetroot Juice Process on the Physico-Chemical Properties of Spray Dried Powder.

Picking vegetables is, along with salting and drying, one of the oldest ways to preserve food in the world. This is the process of decomposition of simple sugars into lactic acid with the participation of lactic bacteria. The aim of the study was to obtain powders from fermented red beet juice with the highest possible amount of lactic acid bacteria (LAB) and active ingredients. For the analysis, juices were squeezed from the vegetables and two types of fermentation were used: a spontaneous fermentation and a dedicated one. After inoculation, samples were taken for analysis on a daily basis. Extract, pH, total acidity, pigments, and color were measured. In addition, microbiological tests were also carried out. The juices from the fifth day of fermentation was also spray dried, to obtain fermented beetroot powder. Juices from 3-5th day were characterized by a high content of LAB and betanin, had also a low pH, which proves that the lactic fermentation is working properly. The exception was the juice from spontaneous fermentation. According to the observations, the fermentation process did not run properly, and further analysis is needed. The powders were stable; however, results obtained from the pigment content and the LAB content are not satisfactory and require further analysis.