A Flexible, Adaptive, and Self-Powered Triboelectric Vibration Sensor with Conductive Sponge-Silicone for Machinery Condition Monitoring.

Vibration sensors for continuous and reliable condition monitoring of mechanical equipment, especially detection points of curved surfaces, remain a great challenge and are highly desired. Herein, a highly flexible and adaptive triboelectric vibration sensor for high-fidelity and continuous monitoring of mechanical vibration conditions is proposed. The sensor is entirely composed of flexible materials. It consists of a conductive sponge-silicone layer and a fluorinated ethylene propylene film. It can detect vibration acceleration of 5 to 50 m s-2 and vibration frequency of 10 to 100 Hz. It has strong robustness and stability, and the output performance barely changes after the durability test of 168 000 working cycles. Additionally, the flexible sensor can work even when the detection point of the mechanical equipment is curved, and the linear fit of the output voltage and acceleration is very close to that when the detection point is flat. Finally, it can be applied to monitoring the working condition of blower and vehicle engine, and can transmit vibration signal to mobile phone application through Wi-Fi module for real-time monitoring. The flexible triboelectric vibration sensor is expected to provide a practical paradigm for smart, green, and sustainable wireless sensor system in the era of Internet of Things.

Bioelectronic Sensor Nodes for the Internet of Bodies.

Energy-efficient sensing with physically secure communication for biosensors on, around, and within the human body is a major area of research for the development of low-cost health care devices, enabling continuous monitoring and/or secure perpetual operation. When used as a network of nodes, these devices form the Internet of Bodies, which poses challenges including stringent resource constraints, simultaneous sensing and communication, and security vulnerabilities. Another major challenge is to find an efficient on-body energy-harvesting method to support the sensing, communication, and security submodules. Due to limitations in the amount of energy harvested, we require a reduction in energy consumed per unit information, making the use of in-sensor analytics and processing imperative. In this article, we review the challenges and opportunities of low-power sensing, processing, and communication with possible powering modalities for future biosensor nodes. Specifically, we analyze, compare, and contrast (a) different sensing mechanisms such as voltage/current domain versus time domain, (b) low-power, secure communication modalities including wireless techniques and human body communication, and (c) different powering techniques for wearable devices and implants.

A novel approach for heart disease prediction using hybridized AITH2O algorithm and SANFIS classifier.

In today's world, heart disease threatens human life owing to higher mortality and morbidity across the globe. The earlier prediction of heart disease engenders interoperability for the treatment of patients and offers better diagnostic recommendations from medical professionals. However, the existing machine learning classifiers suffer from computational complexity and overfitting problems, which reduces the classification accuracy of the diagnostic system. To address these constraints, this work proposes a new hybrid optimization algorithm to improve the classification accuracy and optimize computation time in smart healthcare applications. Primarily, the optimal features are selected through the hybrid Arithmetic Optimization and Inter-Twinned Mutation-Based Harris Hawk Optimization (AITH2O) algorithm. The proposed hybrid AITH2O algorithm entails advantages of both exploration and exploitation abilities and acquires faster convergence. It is further employed to tune the parameters of the Stabilized Adaptive Neuro-Fuzzy Inference System (SANFIS) classifier for predicting heart disease accurately. The Cleveland heart disease dataset is utilized to validate the efficacy of the proposed algorithm. The simulation is carried out using MATLAB 2020a environment. The simulation results show that the proposed hybrid SANFIS classifier attains a superior accuracy of 99.28% and true positive rate of 99.46% compared to existing state-of-the-art techniques.

Internet-of-Things for smart irrigation control and crop recommendation using interactive guide-deep model in Agriculture 4.0 applications.

The rapid advancements in Agriculture 4.0 have led to the development of the continuous monitoring of the soil parameters and recommend crops based on soil fertility to improve crop yield. Accordingly, the soil parameters, such as pH, nitrogen, phosphorous, potassium, and soil moisture are exploited for irrigation control, followed by the crop recommendation of the agricultural field. The smart irrigation control is performed utilizing the Interactive guide optimizer-Deep Convolutional Neural Network (Interactive guide optimizer-DCNN), which supports the decision-making regarding the soil nutrients. Specifically, the Interactive guide optimizer-DCNN classifier is designed to replace the standard ADAM algorithm through the modeled interactive guide optimizer, which exhibits alertness and guiding characters from the nature-inspired dog and cat population. In addition, the data is down-sampled to reduce redundancy and preserve important information to improve computing performance. The designed model attains an accuracy of 93.11 % in predicting the minerals, pH value, and soil moisture thereby, exhibiting a higher recommendation accuracy of 97.12% when the model training is fixed at 90%. Further, the developed model attained the F-score, specificity, sensitivity, and accuracy values of 90.30%, 92.12%, 89.56%, and 86.36% with k-fold 10 in predicting the minerals that revealed the efficacy of the model.

Enhancement of cyber security in IoT based on ant colony optimized artificial neural adaptive Tensor flow.

The Internet of Things (IoT) is a network that connects various hardware, software, data storage, and applications. These interconnected devices provide services to businesses and can potentially serve as entry points for cyber-attacks. The privacy of IoT devices is increasingly vulnerable, particularly to threats like viruses and illegal software distribution lead to the theft of critical information. Ant Colony-Optimized Artificial Neural-Adaptive Tensorflow (ACO-ANT) technique is proposed to detect malicious software illicitly disseminated through the IoT. To emphasize the significance of each token in source duplicate data, the noise data undergoes processing using tokenization and weighted attribute techniques. Deep learning (DL) methods are then employed to identify source code duplication. Also the Multi-Objective Recurrent Neural Network (M-RNN) is used to identify suspicious activities within an IoT environment. The performance of proposed technique is examined using Loss, accuracy, F measure, precision to identify its efficiency. The experimental outcomes demonstrate that the proposed method ACO-ANT on Malimg dataset provides 12.35%, 14.75%, 11.84% higher precision and 10.95%, 15.78%, 13.89% higher f-measure compared to the existing methods. Further, leveraging block chain for malware detection is a promising direction for future research the fact that could enhance the security of IoT and identify malware threats.

Bolstering IoT security with IoT device type Identification using optimized Variational Autoencoder Wasserstein Generative Adversarial Network.

Due to the massive growth in Internet of Things (IoT) devices, it is necessary to properly identify, authorize, and protect against attacks the devices connected to the particular network. In this manuscript, IoT Device Type Identification based on Variational Auto Encoder Wasserstein Generative Adversarial Network optimized with Pelican Optimization Algorithm (IoT-DTI-VAWGAN-POA) is proposed for Prolonging IoT Security. The proposed technique comprises three phases, such as data collection, feature extraction, and IoT device type detection. Initially, real network traffic dataset is gathered by distinct IoT device types, like baby monitor, security camera, etc. For feature extraction phase, the network traffic feature vector comprises packet sizes, Mean, Variance, Kurtosis derived by Adaptive and concise empirical wavelet transforms. Then, the extracting features are supplied to VAWGAN is used to identify the IoT devices as known or unknown. Then Pelican Optimization Algorithm (POA) is considered to optimize the weight factors of VAWGAN for better IoT device type identification. The proposed IoT-DTI-VAWGAN-POA method is implemented in Python and proficiency is examined under the performance metrics, like accuracy, precision, f-measure, sensitivity, Error rate, computational complexity, and RoC. It provides 33.41%, 32.01%, and 31.65% higher accuracy, and 44.78%, 43.24%, and 48.98% lower error rate compared to the existing methods.

Smart plant disease net: Adaptive Dense Hybrid Convolution network with attention mechanism for IoT-based plant disease detection by improved optimization approach.

Plant diseases are rising nowadays. Plant diseases lead to high economic losses. Internet of Things (IoT) technology has found its application in various sectors. This led to the introduction of smart farming, in which IoT has been utilized to help identify the exact spot of the diseased affected region on the leaf from the vast farmland in a well-organized and automated manner. Thus, the main focus of this task is the introduction of a novel plant disease detection model that relies on IoT technology. The collected images are given to the Image Transmission phase. Here, the encryption task is performed by employing the Advanced Encryption Standard (AES) and also the decrypted plant images are fed to the pre-processing stage. The Mask Regions with Convolutional Neural Networks (R-CNN) are used to segment the pre-processed images. Then, the segmented images are given to the detection phase in which the Adaptive Dense Hybrid Convolution Network with Attention Mechanism (ADHCN-AM) approach is utilized to perform the detection of plant disease. From the ADHCN-AM, the final detected plant disease outcomes are obtained. Throughout the entire validation, the offered model shows 95% enhancement in terms of MCC showcasing its effectiveness over the existing approaches.

Virtual hospital and artificial intelligence: a first step towards the application of an innovative health system for the care of rare cerebrovascular diseases.

The development of virtual care options, including virtual hospital platforms, is rapidly changing the healthcare, mostly in the pandemic period, due to difficulties in in-person consultations. For this purpose, in 2020, a neurological Virtual Hospital (NOVHO) pilot study has been implemented, in order to experiment a multidisciplinary second opinion evaluation system for neurological diseases. Cerebrovascular diseases represent a preponderant part of neurological disorders. However, more than 30% of strokes remain of undetermined source, and rare CVD (rCVD) are often misdiagnosed. The lack of data on phenotype and clinical course of rCVD patients makes the diagnosis and the development of therapies challenging. Since the diagnosis and care of rCVDs require adequate expertise and instrumental tools, their management is mostly allocated to a few experienced hospitals, making difficult equity in access to care. Therefore, strategies for virtual consultations are increasingly applied with some advantage for patient management also in peripheral areas. Moreover, health data are becoming increasingly complex and require new technologies to be managed. The use of Artificial Intelligence is beginning to be applied to the healthcare system and together with the Internet of Things will enable the creation of virtual models with predictive abilities, bringing healthcare one step closer to personalized medicine. Herein, we will report on the preliminary results of the NOVHO project and present the methodology of a new project aimed at developing an innovative multidisciplinary and multicentre virtual care model, specific for rCVD (NOVHO-rCVD), which combines the virtual hospital approach and the deep-learning machine system.

Fog-based deep learning framework for real-time pandemic screening in smart cities from multi-site tomographies.

The quick proliferation of pandemic diseases has been imposing many concerns on the international health infrastructure. To combat pandemic diseases in smart cities, Artificial Intelligence of Things (AIoT) technology, based on the integration of artificial intelligence (AI) with the Internet of Things (IoT), is commonly used to promote efficient control and diagnosis during the outbreak, thereby minimizing possible losses. However, the presence of multi-source institutional data remains one of the major challenges hindering the practical usage of AIoT solutions for pandemic disease diagnosis. This paper presents a novel framework that utilizes multi-site data fusion to boost the accurateness of pandemic disease diagnosis. In particular, we focus on a case study of COVID-19 lesion segmentation, a crucial task for understanding disease progression and optimizing treatment strategies. In this study, we propose a novel multi-decoder segmentation network for efficient segmentation of infections from cross-domain CT scans in smart cities. The multi-decoder segmentation network leverages data from heterogeneous domains and utilizes strong learning representations to accurately segment infections. Performance evaluation of the multi-decoder segmentation network was conducted on three publicly accessible datasets, demonstrating robust results with an average dice score of 89.9% and an average surface dice of 86.87%. To address scalability and latency issues associated with centralized cloud systems, fog computing (FC) emerges as a viable solution. FC brings resources closer to the operator, offering low latency and energy-efficient data management and processing. In this context, we propose a unique FC technique called PANDFOG to deploy the multi-decoder segmentation network on edge nodes for practical and clinical applications of automated COVID-19 pneumonia analysis. The results of this study highlight the efficacy of the multi-decoder segmentation network in accurately segmenting infections from cross-domain CT scans. Moreover, the proposed PANDFOG system demonstrates the practical deployment of the multi-decoder segmentation network on edge nodes, providing real-time access to COVID-19 segmentation findings for improved patient monitoring and clinical decision-making.

Skinly: A novel handheld IoT device for validating biophysical skin characteristics.

BACKGROUND: Recent advancements in artificial intelligence have revolutionized dermatological diagnostics. These technologies, particularly machine learning (ML), including deep learning (DL), have shown accuracy equivalent or even superior to human experts in diagnosing skin conditions like melanoma. With the integration of ML, including DL, the development of at home skin analysis devices has become feasible. To this end, we introduced the Skinly system, a handheld device capable of evaluating various personal skin characteristics noninvasively. MATERIALS AND METHODS: Equipped with a moisture sensor and a multi-light-source camera, Skinly can assess age-related skin parameters and specific skin properties. Utilizing state-of-the-art DL, Skinly processed vast amounts of images efficiently. The Skinly system's efficacy was validated both in the lab and at home, comparing its results to established "gold standard" methods. RESULTS: Our findings revealed that the Skinly device can accurately measure age-associated parameters, that is, facial age, skin evenness, and wrinkles. Furthermore, Skinly produced data consistent with established devices for parameters like glossiness, skin tone, redness, and porphyrin levels. A separate study was conducted to evaluate the effects of two moisturizing formulations on skin hydration in laboratory studies with standard instrumentation and at home with Skinly. CONCLUSION: Thanks to its capability for multi-parameter measurements, the Skinly device, combined with its smartphone application, holds the potential to replace more expensive, time-consuming diagnostic tools. Collectively, the Skinly device opens new avenues in dermatological research, offering a reliable, versatile tool for comprehensive skin analysis.

Bayesian-Edge system for classification and segmentation of skin lesions in Internet of Medical Things.

BACKGROUND: Skin diseases are severe diseases. Identification of these severe diseases depends upon the abstraction of atypical skin regions. The segmentation of these skin diseases is essential to rheumatologists in risk impost and for valuable and vital decision-making. Skin lesion segmentation from images is a crucial step toward achieving this goal-timely exposure of malignancy in psoriasis expressively intensifies the persistence ratio. Defies occur when people presume skin diseases they have without accurately and precisely incepted. However, analyzing malignancy at runtime is a big challenge due to the truncated distinction of the visual similarity between malignance and non-malignance lesions. However, images' different shapes, contrast, and vibrations make skin lesion segmentation challenging. Recently, various researchers have explored the applicability of deep learning models to skin lesion segmentation. MATERIALS AND METHODS: This paper introduces a skin lesions segmentation model that integrates two intelligent methodologies: Bayesian inference and edge intelligence. In the segmentation model, we deal with edge intelligence to utilize the texture features for the segmentation of skin lesions. In contrast, Bayesian inference enhances skin lesion segmentation's accuracy and efficiency. RESULTS: We analyze our work along several dimensions, including input data (datasets, preprocessing, and synthetic data generation), model design (architecture, modules), and evaluation aspects (data annotation requirements and segmentation performance). We discuss these dimensions from seminal works and a systematic viewpoint and examine how these dimensions have influenced current trends. CONCLUSION: We summarize our work with previously used techniques in a comprehensive table to facilitate comparisons. Our experimental results show that Bayesian-Edge networks can boost the diagnostic performance of skin lesions by up to 87.80% without incurring additional parameters of heavy computation.

Assessment of radio frequency fields in the 2.45 GHz band produced by smart home devices.

This paper describes the assessment of the electromagnetic fields produced by consumer "smart" devices used to control and monitor everyday equipment and appliances in a modern "smart" home. The assessment is based on the careful measurement of fields produced by a range of such devices in a laboratory environment configured to operate in a condition simulating high user activity. All devices included in this study operate in the 2.4 GHz band utilizing either Wi-Fi or Bluetooth connectivity. Overall results indicate very low levels of electromagnetic fields for all IoT smart devices in terms of human exposure safety standards (typically much less than 1%) with very low duty cycles (also less than 1%) resulting in even lower time-averaged exposure levels. These low levels of exposure, along with rapid reduction of levels with distance from the devices, suggests that the cumulative effect of multiple devices in a "smart" home are not significant.

Enhancing Patient Safety Through an Integrated Internet of Things Patient Care System: Large Quasi-Experimental Study on Fall Prevention.

BACKGROUND: The challenge of preventing in-patient falls remains one of the most critical concerns in health care. OBJECTIVE: This study aims to investigate the effect of an integrated Internet of Things (IoT) smart patient care system on fall prevention. METHODS: A quasi-experimental study design is used. The smart patient care system is an integrated IoT system combining a motion-sensing mattress for bed-exit detection, specifying different types of patient calls, integrating a health care staff scheduling system, and allowing health care staff to receive and respond to alarms via mobile devices. Unadjusted and adjusted logistic regression models were used to investigate the relationship between the use of the IoT system and bedside falls compared with a traditional patient care system. RESULTS: In total, 1300 patients were recruited from a medical center in Taiwan. The IoT patient care system detected an average of 13.5 potential falls per day without any false alarms, whereas the traditional system issued about 11 bed-exit alarms daily, with approximately 4 being false, effectively identifying 7 potential falls. The bedside fall incidence during hospitalization was 1.2% (n=8) in the traditional patient care system ward and 0.1% (n=1) in the smart ward. We found that the likelihood of bedside falls in wards with the IoT system was reduced by 88% (odds ratio 0.12, 95% CI 0.01-0.97; P=.047). CONCLUSIONS: The integrated IoT smart patient care system might prevent falls by assisting health care staff with efficient and resilient responses to bed-exit detection. Future product development and research are recommended to introduce IoT into patient care systems combining bed-exit alerts to prevent inpatient falls and address challenges in patient safety.

Longitudinal Coadaptation of Older Adults With Wearables and Voice-Activated Virtual Assistants: Scoping Review.

BACKGROUND: The integration of smart technologies, including wearables and voice-activated devices, is increasingly recognized for enhancing the independence and well-being of older adults. However, the long-term dynamics of their use and the coadaptation process with older adults remain poorly understood. This scoping review explores how interactions between older adults and smart technologies evolve over time to improve both user experience and technology utility. OBJECTIVE: This review synthesizes existing research on the coadaptation between older adults and smart technologies, focusing on longitudinal changes in use patterns, the effectiveness of technological adaptations, and the implications for future technology development and deployment to improve user experiences. METHODS: Following the Joanna Briggs Institute Reviewer's Manual and PRISMA-ScR (Preferred Reporting Items for Systematic Reviews and Meta-Analyses Extension for Scoping Reviews) guidelines, this scoping review examined peer-reviewed papers from databases including Ovid MEDLINE, Ovid Embase, PEDro, Ovid PsycINFO, and EBSCO CINAHL from the year 2000 to August 28, 2023, and included forward and backward searches. The search was updated on March 1, 2024. Empirical studies were included if they involved (1) individuals aged 55 years or older living independently and (2) focused on interactions and adaptations between older adults and wearables and voice-activated virtual assistants in interventions for a minimum period of 8 weeks. Data extraction was informed by the selection and optimization with compensation framework and the sex- and gender-based analysis plus theoretical framework and used a directed content analysis approach. RESULTS: The search yielded 16,143 papers. Following title and abstract screening and a full-text review, 5 papers met the inclusion criteria. Study populations were mostly female participants and aged 73-83 years from the United States and engaged with voice-activated virtual assistants accessed through smart speakers and wearables. Users frequently used simple commands related to music and weather, integrating devices into daily routines. However, communication barriers often led to frustration due to devices' inability to recognize cues or provide personalized responses. The findings suggest that while older adults can integrate smart technologies into their lives, a lack of customization and user-friendly interfaces hinder long-term adoption and satisfaction. The studies highlight the need for technology to be further developed so they can better meet this demographic's evolving needs and call for research addressing small sample sizes and limited diversity. CONCLUSIONS: Our findings highlight a critical need for continued research into the dynamic and reciprocal relationship between smart technologies and older adults over time. Future studies should focus on more diverse populations and extend monitoring periods to provide deeper insights into the coadaptation process. Insights gained from this review are vital for informing the development of more intuitive, user-centric smart technology solutions to better support the aging population in maintaining independence and enhancing their quality of life. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): RR2-10.2196/51129.

Machine learning cryptography methods for IoT in healthcare.

BACKGROUND: The increased application of Internet of Things (IoT) in healthcare, has fueled concerns regarding the security and privacy of patient data. Lightweight Cryptography (LWC) algorithms can be seen as a potential solution to address this concern. Due to the high variation of LWC, the primary objective of this study was to identify a suitable yet effective algorithm for securing sensitive patient information on IoT devices. METHODS: This study evaluates the performance of eight LWC algorithms-AES, PRESENT, MSEA, LEA, XTEA, SIMON, PRINCE, and RECTANGLE-using machine learning models. Experiments were conducted on a Raspberry Pi 3 microcontroller using 16 KB to 2048 KB files. Machine learning models were trained and tested for each LWC algorithm and their performance was evaluated based using precision, recall, F1-score, and accuracy metrics. RESULTS: The study analyzed the encryption/decryption execution time, energy consumption, memory usage, and throughput of eight LWC algorithms. The RECTANGLE algorithm was identified as the most suitable and efficient LWC algorithm for IoT in healthcare due to its speed, efficiency, simplicity, and flexibility. CONCLUSIONS: This research addresses security and privacy concerns in IoT healthcare and identifies key performance factors of LWC algorithms utilizing the SLR research methodology. Furthermore, the study provides insights into the optimal choice of LWC algorithm for enhancing privacy and security in IoT healthcare environments.

Passive UHF RFID-based real-time intravenous fluid level sensor.

Ultra high frequency (UHF) passive radio frequency identification (RFID) tag-based sensors are proposed for intravenous (IV) fluid level monitoring in medical Internet of Things (IoT) applications. Two versions of the sensor are proposed: a binary sensor (i.e., full vs. empty state sensing) and a real-time (i.e., continuous level) sensor. The operating principle is demonstrated using full-wave electromagnetic simulation at 910 MHz and validated with experimental results. Generalized Additive Model (GAM) and random forest algorithms are employed for each interrogation dataset. Real-time sensing is accomplished with small deviations across the models. A minimum of 72% and a maximum of 97% of cases are within a 20% error for the GAM model and 62% to 98% for the random forest model. The proposed sensor is battery-free, lightweight, low-cost, and highly reliable. The read range of the proposed sensor is 4.6 m.

Complementary use of visual and olfactory cues to assess capture of Bactrocera dorsalis (Hendel): Implementation and field verification via an IoT-based automatic monitoring system.

This study examined the effect of combining visual and olfactory cues to attract oriental fruit flies (OFFs). Six different colored light-emitting diodes (LEDs) served as a visual attractant and methyl eugenol served as olfactory bait to lure male flies. An internet of things (IoT)-based pest monitoring system, consisting of sensor nodes, a gateway, and automatic counting traps, was deployed in the field to automatically collect environmental data and pest counts. The results of the calibrated experiments indicated that green, yellow, or red LEDs exhibited better performance in attracting flies than white, purple, or blue LEDs or no LEDs. With an accurate combination of visual and olfactory cues, the proposed IoT-based pest monitoring system may be an effective tool in agricultural pest management, given its advantages for efficiently capturing OFFs in a labor and time saving manner, providing accurate information regarding increases in pest populations, and enabling long-term, real-time data collection.

Cross-Domain Knowledge Transfer for Sustainable Heterogeneous Industrial Internet-of-Things Networks.

In this article, a novel cross-domain knowledge transfer method is implemented to optimize the tradeoff between energy consumption and information freshness for all pieces of equipment powered by heterogeneous energy sources within smart factory. Three distinct groups of use cases are considered, each utilizing a different energy source: grid power, green energy source, and mixed energy sources. Differing from mainstream algorithms that require consistency among groups, the proposed method enables knowledge transfer even across varying state and/or action spaces. With the advantage of multiple layers of knowledge extraction, a lightweight knowledge transfer is achieved without the need for neural networks. This facilitates broader applications in self-sustainable wireless networks. Simulation results reveal a notable improvement in the 'warm start' policy for each equipment, manifesting as a 51.32% increase in initial reward compared to a random policy approach.

Examination of Traditional Botnet Detection on IoT-Based Bots.

A botnet is a collection of Internet-connected computers that have been suborned and are controlled externally for malicious purposes. Concomitant with the growth of the Internet of Things (IoT), botnets have been expanding to use IoT devices as their attack vectors. IoT devices utilise specific protocols and network topologies distinct from conventional computers that may render detection techniques ineffective on compromised IoT devices. This paper describes experiments involving the acquisition of several traditional botnet detection techniques, BotMiner, BotProbe, and BotHunter, to evaluate their capabilities when applied to IoT-based botnets. Multiple simulation environments, using internally developed network traffic generation software, were created to test these techniques on traditional and IoT-based networks, with multiple scenarios differentiated by the total number of hosts, the total number of infected hosts, the botnet command and control (CnC) type, and the presence of aberrant activity. Externally acquired datasets were also used to further test and validate the capabilities of each botnet detection technique. The results indicated, contrary to expectations, that BotMiner and BotProbe were able to detect IoT-based botnets-though they exhibited certain limitations specific to their operation. The results show that traditional botnet detection techniques are capable of detecting IoT-based botnets and that the different techniques may offer capabilities that complement one another.

GBDT-IL: Incremental Learning of Gradient Boosting Decision Trees to Detect Botnets in Internet of Things.

The rapid development of the Internet of Things (IoT) has brought many conveniences to our daily life. However, it has also introduced various security risks that need to be addressed. The proliferation of IoT botnets is one of these risks. Most of researchers have had some success in IoT botnet detection using artificial intelligence (AI). However, they have not considered the impact of dynamic network data streams on the models in real-world environments. Over time, existing detection models struggle to cope with evolving botnets. To address this challenge, we propose an incremental learning approach based on Gradient Boosting Decision Trees (GBDT), called GBDT-IL, for detecting botnet traffic in IoT environments. It improves the robustness of the framework by adapting to dynamic IoT data using incremental learning. Additionally, it incorporates an enhanced Fisher Score feature selection algorithm, which enables the model to achieve a high accuracy even with a smaller set of optimal features, thereby reducing the system resources required for model training. To evaluate the effectiveness of our approach, we conducted experiments on the BoT-IoT, N-BaIoT, MedBIoT, and MQTTSet datasets. We compared our method with similar feature selection algorithms and existing concept drift detection algorithms. The experimental results demonstrated that our method achieved an average accuracy of 99.81% using only 25 features, outperforming similar feature selection algorithms. Furthermore, our method achieved an average accuracy of 96.88% in the presence of different types of drifting data, which is 2.98% higher than the best available concept drift detection algorithms, while maintaining a low average false positive rate of 3.02%.