Guard Cell-Inspired Ion Channels: Harnessing the Photomechanical Effect via Supramolecular Assembly of Cross-Linked Azobenzene/Polymers.

Stimuli-responsive ion nanochannels have attracted considerable attention in various fields because of their remote controllability of ionic transportation. For photoresponsive ion nanochannels, however, achieving precise regulation of ion conductivity is still challenging, primarily due to the difficulty of programmable structural changes in confined environments. Moreover, the relationship between noncontact photo-stimulation in nanoscale and light-induced ion conductivity has not been well understood. In this work, a versatile design for fabricating guard cell-inspired photoswitchable ion channels is presented by infiltrating azobenzene-cross-linked polymer (AAZO-PDAC) into nanoporous anodic aluminum oxide (AAO) membranes. The azobenzene-cross-linked polymer is formed by azobenzene chromophore (AAZO)-cross-linked poly(diallyldimethylammonium chloride) (PDAC) with electrostatic interactions. Under UV irradiation, the trans-AAZO isomerizes to the cis-AAZO, causing the volume compression of the polymer network, whereas, in darkness, the cis-AAZO reverts to the trans-AAZO, leading to the recovery of the structure. Consequently, the resultant nanopore sizes can be manipulated by the photomechanical effect of the AAZO-PDAC polymers. By adding ionic liquids, the ion conductivity of the light-driven ion nanochannels can be controlled with good repeatability and fast responses (within seconds) in multiple cycles. The ion channels have promising potential in the applications of biomimetic materials, sensors, and biomedical sciences.

Accelerating the Development of LLZO in Solid-State Batteries Toward Commercialization: A Comprehensive Review.

Solid-state batteries (SSBs) are under development as high-priority technologies for safe and energy-dense next-generation electrochemical energy storage systems operating over a wide temperature range. Solid-state electrolytes (SSEs) exhibit high thermal stability and, in some cases, the ability to prevent dendrite growth through a physical barrier, and compatibility with the "holy grail" metallic lithium. These unique advantages of SSEs have spurred significant research interests during the last decade. Garnet-type SSEs, that is, Li7La3Zr2O12 (LLZO), are intensively investigated due to their high Li-ion conductivity and exceptional chemical and electrochemical stability against lithium metal anodes. However, poor interfacial contact with cathode materials, undesirable lithium plating along grain boundaries, and moisture-induced chemical degradation greatly hinder the practical implementation of LLZO-based SSEs for SSBs. In this review, the recent advances in synthesis methods, modification strategies, corresponding mechanisms, and applications of garnet-based SSEs in SSBs are critically summarized. Furthermore, a comprehensive evaluation of the challenges and development trends of LLZO-based electrolytes in practical applications is presented to accelerate their development for high-performance SSBs.

A Set of New Promising Solid Chalcogenides for Na-Ion Batteries: Yield from the Crystal Chemical, Monte-Carlo and Quantum-Chemical Calculations.

Free crystal space in more than 600 chalcogenide structures taken out from the ICSD has been theoretically analyzed. As a result, wide voids and channels accessible for Na+-ion migration were found in 236 structures. Among them, 165 compounds have not been described in the literature as Na+-conducting materials. These materials have been subjected to stepwise quantitative calculations. The bond valence site energy method has enabled the identification of 57 entries as the most promising ion conductors in which the Na+-ion migration energy (Em) is less than 0.55 eV for 2D or 3D diffusion. The kinetic Monte-Carlo method has been carried out for these substances; as a result, resulting in nine of the most prospective compounds with Na+-ionic conductivity Ϭ≥10-4 S cm-1 at room temperature were selected, for which the density functional theory calculations have been performed yielding six best candidates. Additionally, a logarithmic relationship was established between the values of Em and the diffusion channel radii as well as a linear relationship between Ϭ and the void radius.

Optimizing the Ion Conductivity and Mechanical Stability of Polymer Electrolyte Membranes Designed for Use in Lithium Ion Batteries: Combining Imidazolium-Containing Poly(ionic liquids) and Poly(propylene carbonate).

State-of-the-art Li batteries suffer from serious safety hazards caused by the reactivity of lithium and the flammable nature of liquid electrolytes. This work develops highly efficient solid-state electrolytes consisting of imidazolium-containing polyionic liquids (PILs) and lithium bis(trifluoromethane sulfonyl)imide (LiTFSI). By employing PIL/LiTFSI electrolyte membranes blended with poly(propylene carbonate) (PPC), we addressed the problem of combining ionic conductivity and mechanical properties in one material. It was found that PPC acts as a mechanically reinforcing component that does not reduce but even enhances the ionic conductivity. While pure PILs are liquids, the tricomponent PPC/PIL/LiTFSI blends are rubber-like materials with a Young's modulus in the range of 100 MPa. The high mechanical strength of the material enables fabrication of mechanically robust free-standing membranes. The tricomponent PPC/PIL/LiTFSI membranes have an ionic conductivity of 10-6 S·cm-1 at room temperature, exhibiting conductivity that is two orders of magnitude greater than bicomponent PPC/LiTFSI membranes. At 60 °C, the conductivity of PPC/PIL/LiTFSI membranes increases to 10-5 S·cm-1 and further increases to 10-3 S·cm-1 in the presence of plasticizers. Cyclic voltammetry measurements reveal good electrochemical stability of the tricomponent PIL/PPC/LiTFSI membrane that potentially ranges from 0 to 4.5 V vs. Li/Li+. The mechanically reinforced membranes developed in this work are promising electrolytes for potential applications in solid-state batteries.

High Ion Conductive and Selective Membrane Achieved through Dual Ion Conducting Mechanisms.

Conventional ion-selective membranes, that is ion-exchange and porous membranes, are unable to perform high conductivity and selectivity simultaneously due to the contradictions between their ion selecting and conducting mechanisms. In this work, a bifunctional ion-selective layer is developed via the combination of nanoporous boron nitride (PBN) and ion exchange groups from Nafion to achieve high ion conductivity through dual ion conducting mechanisms as well as high ion selectivity. A template-free method is adopted to synthesize flake-like PBN, which is further enmeshed with Nafion resin to form the bifunctional layer coated onto a porous polyetherimide membrane. The double-layer membrane exhibits excellent ion selectivity (1.49 × 108 mS cm-3  min), which is 22 times greater than that of the pristine porous polyetherimide membrane, with outstanding ion conductivity (64 mS cm-1 ). In a vanadium flow battery, the double-layer membrane achieves a high Coulombic efficiency of 97% and outstanding energy efficiency of 91% at 40 mA cm-2 with a stable cycling performance for over 700 cycles at 100 mA cm-2 . PBN with ion exchange groups may therefore offer a potential solution to the limitation between ion selectivity and conductivity in ion-selective membranes.

Carbonized Polymer Dots Assemble in Proton-Conducting Channels to Enhance the Conductivity and Selectivity Simultaneously for High-Performance Fuel Cells.

Fabricating polymer electrolyte membranes (PEMs) simultaneously with high ion conductivity and selectivity has always been an ultimate goal in many membrane-integrated systems for energy conversion and storage. Constructing broader ion-conducting channels usually enables high-efficient ion conductivity while often bringing increased crossover of other ions or molecules simultaneously, resulting in decreased selectivity. Here, the ultra-small carbon dots (CDs) with the selective barriers are self-assembled within proton-conducting channels of PEMs through electrostatic interaction to enhance the proton conductivity and selectivity simultaneously. The functional CDs regulate the nanophase separation of PEMs and optimize the hydration proton network enabling higher-efficient proton transport. Meanwhile, the CDs within proton-conducting channels prevent fuel from permeating selectively due to their repelling and spatial hindrance against fuel molecules, resulting in highly enhanced selectivity. Benefiting from the improved conductivity and selectivity, the open-circuit voltage and maximum power density of the direct methanol fuel cell (DMFC) equipped with the hybrid membranes raised by 23% and 93%, respectively. This work brings new insight to optimize polymer membranes for efficient and selective transport of ions or small molecules, solving the trade-off of conductivity and selectivity.

Construction of Synchronous-Deposition K Metal Anodes Via Modulation of Ion/Electron Transport Kinetics for High-Rate and Low-Temperature K Metal Batteries.

The construction of conductive scaffolds is demonstrated to be an ideal strategy to alleviate the volume expansion and dendrite growth of K metal anodes. Nevertheless, the heterogeneous top-bottom deposition behavior caused by incompatible electronic/ionic conductivity of three-dimensional (3D) skeleton severely hinders its application. Here, a K2 Se/Cu conducting layer is fabricated on the Cu foam so as to enhance ionic transport and weaken electronic conductivity of the skeleton. Then, an excellent simultaneous deposition behavior of K metal inside the host is obtained for the first time via tuning fast ionic transport and low electronic conductivity. The simultaneous deposition mode can not only utilize the entire 3D structure to accommodate the volume expansion during K deposition but also avoid the formation of K dendrites at high current and ultra-low temperature. Consequently, the symmetric cells present a long cycle lifespan over 1000 h with a low deposition overpotential of 80 mV at 1 mA cm-2 . Furthermore, the full cell matching with the perylene-tetracarboxylic dianhydride (PTCDA) cathode presents an outstanding cycle lifespan over 600 cycles at 5 C at -20°C. The proposed simultaneous deposition strategy provides a new design direction for the construction of dendrite-free K metal anodes.

Smart Temperature-Gating and Ion Conductivity Control of Grafted Anodic Aluminum Oxide Membranes.

Over the past few decades, stimuli-responsive materials have been widely applied to porous surfaces. Permeability and conductivity control of ions confined in nanochannels modified with stimuli-responsive materials, however, have been less investigated. In this work, the permeability and conductivity control of ions confined in nanochannels of anodic aluminum oxide (AAO) templates modified with thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) brushes are demonstrated. By surface-initiated atom transfer radical polymerization (SI-ATRP), PNIPAM brushes are successfully grafted onto the hexagonally packed cylindrical nanopores of AAO templates. The surface hydrophilicities of the membranes can be reversibly altered because of the lower critical solution temperature (LCST) behavior of the PNIPAM polymer brushes. From electrochemical impedance spectroscopy (EIS) analysis, the temperature-gating behaviors of the AAO-g-PNIPAM membranes exhibit larger impedance changes than those of the pure AAO membranes at higher temperatures because of the aggregation of the grafted PNIPAM chains. The reversible surface properties caused by the extended and collapsed states of the polymer chains are also demonstrated by dye release tests. The smart thermo-gated and ion-controlled nanoporous membranes are suitable for future smart membrane applications.

Challenges and Strategies of Anion Exchange Membranes in Hydrogen-electricity Energy Conversion Devices.

Alkaline hydrogen-electricity energy conversion technologies, involving anion exchange membrane fuel cells (AEMFCs) and anion exchange membrane water electrolyzers (AEMWEs) are more appealing than the acidic counterparts due to the elimination of precious metal catalysts. However, the physicochemical properties of anion exchange membrane (AEMs), i.e., ionic conductivity, mechanical strength, stability, etc., are inferior to that of proton exchange membranes (PEMs), thus hindering these alkaline technologies from practical employment. To promote their development, we summarize the main challenges and the corresponding strategies of AEMs for the application of AEMFCs and AEMWEs in this review. The hydroxide transportation mechanism, ion exchange capacity, hydration and microscopic morphology that are relevant to the ionic conductivity are discussed firstly. Following the ionic conductivity, another obstacle, stability of AEMs is comprehensively described in terms of alkaline stability, mechanical stability and electrochemical stability. Upon integrating into the devices, water management, carbonation effect and membrane-electrode interface that are critical to the cell performance are highlighted as well. This review is anticipated to provide insights into the AEM design for hydrogen-electric energy conversion devices, thus accelerating the widespread commercialization of these promising technologies.

Lithium Lanthanum Titanate Single Crystals: Dependence of Lithium-Ion Conductivity on Crystal Domain Orientation.

Lithium lanthanum titanate La2/3-xLi3xTiO3 (LLTO) has the potential to exhibit the highest Li-ion conductivity among oxide-based electrolytes because of the fast Li-ion diffusion derived from its crystal structure. Herein, bulk Li-ion conductivity of up to σbulk = 4.0 × 10-3 S/cm at 300 K, which is approximately three to four times higher than that of LLTO polycrystals, was demonstrated using LLTO single crystals, and their dependence on crystal domain orientation was examined. A change in the activation energy, which was previously obscured because of random crystal orientation, was observed at approximately 260 K. Furthermore, electron microscopy analysis indicated that the ionic conductivity of LLTOs remained higher because the region with the highest ionic conductivity was tilted away from the ideal conduction orientation. The results reported herein provide the highest conductivity in LLTO and important insights into their crystal structures, enabling higher conductivity in novel oxide-based electrolyte design.

Recent Strategies for Lithium-Ion Conductivity Improvement in Li7La3Zr2O12 Solid Electrolytes.

The development of solid electrolytes with high conductivity is one of the key factors in the creation of new power-generation sources. Lithium-ion solid electrolytes based on Li7La3Zr2O12 (LLZ) with a garnet structure are in great demand for all-solid-state battery production. Li7La3Zr2O12 has two structural modifications: tetragonal (I41/acd) and cubic (Ia3d). A doping strategy is proposed for the stabilization of highly conductive cubic Li7La3Zr2O12. The structure features, density, and microstructure of the ceramic membrane are caused by the doping strategy and synthesis method of the solid electrolyte. The influence of different dopants on the stabilization of the cubic phase and conductivity improvement of solid electrolytes based on Li7La3Zr2O12 is discussed in the presented review. For mono-doping, the highest values of lithium-ion conductivity (~10-3 S/cm at room temperature) are achieved for solid electrolytes with the partial substitution of Li+ by Ga3+, and Zr4+ by Te6+. Moreover, the positive effect of double elements doping on the Zr site in Li7La3Zr2O12 is established. There is an increase in the popularity of dual- and multi-doping on several Li7La3Zr2O12 sublattices. Such a strategy leads not only to lithium-ion conductivity improvement but also to the reduction of annealing temperature and the amount of some high-cost dopant. Al and Ga proved to be effective co-doping elements for the simultaneous substitution in Li/Zr and Li/La sublattices of Li7La3Zr2O12 for improving the lithium-ion conductivity of solid electrolytes.

An Unprecedented Fireproof, Anion-Immobilized Composite Electrolyte Obtained via Solidifying Carbonate Electrolyte for Safe and High-Power Solid-State Lithium-Ion Batteries.

The update of electrolytes from a liquid state to a solid state is considered effective in improving the safety and energy density of lithium-ion batteries (LIBs). Although numerous efforts have been made, solid-state electrolytes' (SSEs) insufficient charge transfer capability remains a significant obstruction to practical applications. Herein, a fireproof and anion-immobilized composite electrolyte is designed by solidifying carbonate electrolyte, exhibiting superior Li-ion conductivity (11.5 mS cm-1 at 30 °C) and Li-ion transference number (0.90), which endows LIBs excellent rate capability and cycling stability. Elaborate characteristics and theoretical calculations demonstrate the presence of robust anion-molecule coordination (composed of lithium bond and Coulomb force) enables a more efficient ion transport, where the mobility of Li+ ion is enhanced meanwhile the anions are immobilized. This work highlights how the strong interactions between electrolyte components can be used to simultaneously regulate the migration of Li+ ion and anion, and realize a one-step conversion of inflammable liquid-state electrolyte to nonflammable solid-state electrolyte.

High Performance Solid-State Lithium-Sulfur Battery Enabled by Multi-Functional Cathode and Flexible Hybrid Solid Electrolyte.

With its superior theoretical energy density as well as abundance and environment-friendliness, the lithium-sulfur battery (LiSB) is a potential candidate to replace the traditional energy storage and generation systems. An innovative design is proposed for the high-performance solid-state LiSB system by combining the multi-functional cathode comprising the sulfur-loaded Al2 O3 -modified carbon nanotubes (S@ACNTs) and the flexible hybrid solid electrolyte (HSE). Assembled with S@ACNTs active material, the polycation poly(diallyldimethylammonium bis(trifluoromethylsulfonyl)imide) (PDATFSI) binder exhibits high Li+ conductivity of 0.45 mS cm-1 at room temperature, good thermal stability up to 450 °C, high adhesive strength with aluminum current collector up to 24 MPa, sustainable non-flammability, and desirable flexibility. When assembled with HSE membrane, the S@ACNTs/PDATFSI-60IL cathode layer demonstrates effective polysulfide trapping behavior and superior compatibility (65 Ω), resulting in high discharge capacity of 1203 mAh g-1 at 0.2 C in the 1st cycle, and long-term stability up to 91.69% of the discharge capacity after 200 cycles of charge/discharge process.

Mechanics, Ionics, and Optics of Metal-Organic Framework and Coordination Polymer Glasses.

Melt and glassy states of coordination polymers (CPs)/metal-organic frameworks (MOFs) have gained attention as a new class of amorphous materials. Many bridging ligands such as azolate, nitrile, thiocyanide, thiolate, pyridine, sulfonate, and amide are available to construct crystals with melting temperatures in the range of 60-593 °C. Here, we discuss the mechanism of crystal melting, glass structures, and mechanical properties by considering both experimental and theoretical studies. High and exclusive H+ or Li+ conductivities in moldable CP glasses have been proven in the all-solid-state devices such as fuel cells or secondary batteries. Transparent glasses with wide composition and available dopants are also attractive for nonlinear optics, photoconductivity, emission, and light-harvesting. The ongoing challenge in the field is to develop the design principles of CP/MOF melts and glasses, corresponding functions of mass (ion, electron, photon, phonon, and so forth). transport and conversion, and the integration of devices with the use of their tunable mechanical properties.

Atomistic Origin of Li-Ion Conductivity Reduction at (Li3xLa2/3-x)TiO3 Grain Boundary.

Lithium lanthanum titanate (LLTO) is one of the excellent candidates for an electrolyte in the all-solid-state Li-ion battery, owing to the high Li-ion conductivity in the bulk. However, the Li-ion conductivity at the grain boundary (GB) is largely reduced, and it is therefore important to reveal the origin of Li-ion conductivity reduction at the GB. Here, by using atomic-resolution scanning transmission electron microscopy combined with atomic force microscopy, we investigate the charge states, Li-ion conductivities, atomic and electronic structures at the LLTO Σ5 and Σ13 GBs. Although the Σ5 GB has no significant influence on Li-ion conductivity, the Σ13 GB shows the evident reduction of Li-ion conductivity. We further elucidate that the Σ13 GB is positively charged by the formation of oxygen vacancies at the GB. Such a positive charge would form the Li-ion depletion layers adjacent to the GB, which causes the significant reduction of Li-ion conductivity.

Potassium Ion Conductivity in the Cubic Labyrinth of a Piezoelectric, Antiferromagnetic Oxoferrate(III) Tellurate(VI).

Orange-colored crystals of the oxoferrate tellurate K12+6x Fe6 Te4-x O27 [x=0.222(4)] were synthesized in a potassium hydroxide hydroflux with a molar water-base ratio n(H2 O)/n(KOH) of 1.5 starting from Fe(NO3 )3 ⋅ 9H2 O, TeO2 and H2 O2 at about 200 °C. By using (NH4 )2 TeO4 instead of TeO2 , a fine powder consisting of microcrystalline spheres of K12+6x Fe6 Te4-x O27 was obtained. K12+6x Fe6 Te4-x O27 crystallizes in the acentric cubic space group I 4 ‾ 3d. [FeIII O5 ] pyramids share their apical atoms in [Fe2 O9 ] groups and two of their edges with [TeVI O6 ] octahedra to form an open framework that consists of two loosely connected, but not interpenetrating, chiral networks. The flexibility of the hinged oxometalate network manifests in a piezoelectric response similar to that of LiNbO3 .The potassium cations are mobile in channels that run along the <111> directions and cross in cavities acting as nodes. The ion conductivity of cold-pressed pellets of ball-milled K12+6x Fe6 Te4-x O27 is 2.3×10-4 S ⋅ cm-1 at room temperature. Magnetization measurements and neutron diffraction indicate antiferromagnetic coupling in the [Fe2 O9 ] groups.

Polymorphism and Fast Potassium-Ion Conduction in the T5 Supertetrahedral Phosphidosilicate KSi2 P3.

The all-solid-state battery (ASSB) is a promising candidate for electrochemical energy storage. In view of the limited availability of lithium, however, alternative systems based on earth-abundant and inexpensive elements are urgently sought. Besides well-studied sodium compounds, potassium-based systems offer the advantage of low cost and a large electrochemical window, but are hardly explored. Here we report the synthesis and crystal structure of K-ion conducting T5 KSi2 P3 inspired by recent discoveries of fast ion conductors in alkaline phosphidosilicates. KSi2 P3 is composed of SiP4 tetrahedra forming interpenetrating networks of large T5 supertetrahedra. The compound passes through a reconstructive phase transition from the known T3 to the new tetragonal T5 polymorph at 1020 °C with enantiotropic displacive phase transitions upon cooling at about 155 °C and 80 °C. The potassium ions are located in large channels between the T5 supertetrahedral networks and show facile movement through the structure. The bulk ionic conductivity is up to 2.6×10-4  S cm-1 at 25 °C with an average activation energy of 0.20 eV. This is remarkably high for a potassium ion conductor at room temperature, and marks KSi2 P3 as the first non-oxide solid potassium ion conductor.

Structural determinants underlying permeant discrimination of the Cx43 hemichannel.

Connexin (Cx) gap junction channels comprise two hemichannels in neighboring cells, and their permeability is well-described, but permeabilities of the single Cx hemichannel remain largely unresolved. Moreover, determination of isoform-specific Cx hemichannel permeability is challenging because of concurrent expression of other channels with similar permeability profiles and inhibitor sensitivities. The mammalian Cx hemichannels Cx30 and Cx43 are gated by extracellular divalent cations, removal of which promotes fluorescent dye uptake in both channels but atomic ion conductance only through Cx30. To determine the molecular determinants of this difference, here we employed chimeras and mutagenesis of predicted pore-lining residues in Cx43. We expressed the mutated channels in Xenopus laevis oocytes to avoid background activity of alternative channels. Oocytes expressing a Cx43 hemichannel chimera containing the N terminus or the first extracellular loop from Cx30 displayed ethidium uptake and, unlike WT Cx43, ion conduction, an observation further supported by molecular dynamics simulations. Additional C-terminal truncation of the chimeric Cx43 hemichannel elicited an even greater ion conductance with a magnitude closer to that of Cx30. The inhibitory profile for the connexin hemichannels depended on the permeant, with conventional connexin hemichannel inhibitors having a higher potency toward the ion conductance pathway than toward fluorescent dye uptake. Our results demonstrate a permeant-dependent, isoform-specific inhibition of connexin hemichannels. They further reveal that the outer segments of the pore-lining region, including the N terminus and the first extracellular loop, together with the C terminus preclude ion conductance of the open Cx43 hemichannel.

Nanopatterned Nafion microelectrode arrays for in vitro cardiac electrophysiology.

In this study, we report nanopatterned Nafion microelectrode arrays for in vitro cardiac electrophysiology. With the aim of defining sophisticated Nafion nanostructures with highly ionic conductivity, fabrication parameters such as Nafion concentration and curing temperature were optimized. By increasing curing temperature and Nafion concentration, we were able to control the replication fidelity of Nafion nanopatterns when copied from a PDMS master mold. We also found that cross-sectional morphology and ion current density of nanopatterned Nafion strongly depends on the fabrication parameters. To investigate this dependency, current-voltage analysis was conducted using organic electrochemical transistors (OECT) overlaid with patterned Nafion substrates. Nanopatterned Nafion was found to allow higher ion current densities than unpatterned surfaces. Furthermore, higher curing temperatures were found to render Nafion layers with higher ion/electrical transfer properties. To optimize nanopattern dimensions, electrical current flows, and film uniformity, a final configuration consisting of 5% nanopatterned Nafion cured at 65°C was chosen. Multielectrode arrays (MEAs) were then covered with optimized Nafion nanopatterns and used for electrophysiological analysis of two types of induced pluripotent stem cell-derived cardiomyocytes (iPSCs-CMs). These data highlight the suitability of nanopatterned Nafion, combined with MEAs, for enhancing the cellular environment of iPSC-CMs for use in electrophysiological analysis in vitro.

Proton Conductive Zr-Phosphonate UPG-1-Aminoacid Insertion as Proton Carrier Stabilizer.

Proton exchange membrane fuel cells (PEMFCs) are an attractive green technology for energy generation. The poor stability and performances under working conditions of the current electrolytes are their major drawbacks. Metal-Organic Frameworks (MOFs) have recently emerged as an alternative to overcome these issues. Here, we propose a robust Zr-phosphonate MOF (UPG-1) bearing labile protons able to act a priori as an efficient electrolyte in PEMFCs. Further, in an attempt to further enhance the stability and conductivity of UPG-1, a proton carrier (the amino acid Lysine, Lys) was successfully encapsulated within its porosity. The behaviors of both solids as an electrolyte were investigated by a complete experimental (impedance spectroscopy, water sorption) and computational approach (MonteCarlo, water sorption). Compared with the pristine UPG-1, the newly prepared Lys@UPG-1 composite showed similar proton conductivity but a higher stability, which allows a better cyclability. This improved cyclability is mainly related to the different hydrophobic-hydrophilic balance of the Lys@UPG-1 and UPG-1 and the steric protection of the reactive sites of the MOF by the Lys.