Theoretical isotherm equation for adsorption-induced structural transition on flexible metal-organic frameworks.

Flexible metal-organic frameworks (MOFs) exhibit an adsorption-induced structural transition known as "gate opening" or "breathing," resulting in an S-shaped adsorption isotherm. This unique feature of flexible MOFs offers significant advantages, such as a large working capacity, high selectivity, and intrinsic thermal management capability, positioning them as crucial candidates for revolutionizing adsorption separation processes. Therefore, the interest in the industrial applications of flexible MOFs is increasing, and the adsorption engineering for flexible MOFs is becoming important. However, despite the establishment of the theoretical background for adsorption-induced structural transitions, no theoretical equation is available to describe S-shaped adsorption isotherms of flexible MOFs. Researchers rely on various empirical equations for process simulations that can lead to unreliable outcomes or may overlook insights into improving material performance owing to parameters without physical meaning. In this study, we derive a theoretical equation based on statistical mechanics that could be a standard for the structural transition type adsorption isotherms, as the Langmuir equation represents type I isotherms. The versatility of the derived equation is shown through four examples of flexible MOFs that exhibit gate opening and breathing. The consistency of the formula with existing theories, including the osmotic free energy analysis and intrinsic thermal management capabilities, is also discussed. The developed theoretical equation may lead to more reliable and insightful outcomes in adsorption separation processes, further advancing the direction of industrial applications of flexible MOFs.

Re-Evaluating the Conventional Wisdom about Binding Assays.

Analytical technologies based on binding assays have evolved substantially since their inception nearly 60 years ago, but our conceptual understanding of molecular recognition has not kept pace. Contemporary technologies, such as single-molecule and digital measurements, have challenged, or even rendered obsolete, core concepts behind conventional binding assay design. Here, we explore the fundamental principles underlying molecular recognition systems, which we consider in terms of signals generated through concentration-dependent shifts in equilibrium. We challenge certain orthodoxies related to binding-based detection assays, including the primary importance of a low dissociation constant (KD) and the extent to which this parameter constrains dynamic range and limit of detection. Lastly, we identify key principles for designing binding assays that are optimally suited for a given detection application.

State diagrams of green peas (Pisum sativum L.) powders with different maltodextrin additions.

The purpose of this study was to examine the effect of maltodextrin addition on the physical stability of powdered green peas. The evaluation of the physical state of the material was based on the equilibrium water content of the monolayer (Xm) and the glass transition temperatures of the powders at room temperature (Tg) and in the frozen state (Tg'). Graphical sorption characteristic at 25°C was determined using static-gravimetric method while capacity of the monolayer values was calculated from the mathematical GAB model. Differential scanning calorimetry was carried out in order to determine glass transition lines and freezing curves which combine together were used to plot state diagrams. Relationship between Tg and solid content were shown by using Gordon-Taylor model. Freezing data were modeled employing the Clausius-Clapeyron equation and its development-Chen model. Sorption isotherms showed sigmoidal shape characteristic for high-molecular weight materials. Monolayer moisture content varied between 0.047 and 0.106 g water/g solids. The glass transition temperature of anhydrous green peas increased in from 89.9 to 175.6°C while Tg' value changed from -43.4 to -26.6°C to as a result of 75% polysaccharide addition. The ultimate maximum-freeze-concentration conditions of the powders were observed in range from 0.783 to 0.814 g solids/g sample. Monolayer capacity, Tg and Tg' values increased with increasing maltodextrin amount in the sample which indicates that the addition of starch hydrolysate has a beneficial effect on the stability of powders stored frozen and at room temperature.

Green synthesis of manganese ferrite magnetic nanoparticle and its modification with metallic-organic frameworks for the tetracycline adsorption from aqueous solutions: A mathematical study of kinetics, isotherms, and thermodynamics.

In the current investigation, MnFe2O4/ZIF-8 nanocomposite was generated as a magnetic nanoadsorber using the extract of Dracocephalum plant and characterized by XRD, FTIR, VSM, BET, FESEM, EDS-mapping, TEM, XPS, TPD-NH3, and TGA analyses. Also, to determine its efficiency in the adsorption process of tetracycline, the effect of pH (3-9), nanocomposite dose (0.025-2 g/L), initial pollutant concentration (5-100 mg/L), contact time (5-200 min), and temperature (5-50 °C) were studied. The results of the morphological properties of the magnetic nanocomposite confirmed the spherical shape of this nanoadsorber with an average size of 54 ± 31 nm. BET analysis showed that modification of MnFe2O4 material with ZIF-8 as a new nanoadsorber leads to excellent modification of SBET (143.8 m2/g) and VTotal (0.44 cm3/g). The highest removal efficiency of tetracycline in optimal conditions (pH = 7, contact time = 120 min, nanocomposite dose = 1.5 g/L, and temperature = 20 °C for a tetracycline concentration of 20 mg/L) was 90.11%. As the temperature increased, the removal efficiency increased from 40.46% to 95.06% during 120 min, which indicates that the adsorption reaction is endothermic. In addition, the data obtained from the isotherms of Langmuir (R2 = 0.958), Freundlich (R2 = 0.534), and Temkin (R2 = 0.747) showed that the tetracycline adsorption is monolayer and on the homogeneous surface of the synthesized magnetic nanoadsorber. The elimination process of tetracycline by nanoadsorber followed the pseudo-second order model (R2 = 0.998). Investigating the effect of interfering ions also confirmed the decrease in the adsorption efficiency. Also, the investigation of the reusability of the synthesized magnetic nanoadsorber in tetracycline adsorption indicates that after eight cycles, the efficiency decreases by %16.51. According to the results, the magnetic nanocomposite synthesized in this work can be a suitable and economical adsorber for the removal of tetracycline from aqueous environments.

Highly efficient mesoporous aluminium-magnetite-alginate magnetic composite for defluoridation of water.

One of the few elements that can have negative health impacts in both conditions, when consumed in excess or insufficiency is fluoride. In current study, aluminium magnetite alginate composite (AMA) was fabricated and applied using batch adsorption of fluoride as well as by using statistical modelling. Heterogeneous surface as revealed from scanning electron micrograph, thermal stability shown by thermal studies, high surface area of 29.77 m2 g-1, pore volume 0.1987 cm3 g-1 with mesoporous structure having average pore radius of 133 Å shown by BET analysis, fare degree of magnetization from VSM analysis were the important features of this material. Screening experiments and batch trials were carried out to obtain optimum working conditions. pH of 3.0, dosage of 50 mg, interaction period of 60 min and concentration of 50 mg L-1 depicted maximum defluoridation efficacy of about 94%. The adsorption capacity was found to be 60.08 mg g-1 in accordance with Langmuir adsorption isotherm, while pseudo second order kinetics was followed. Overall effects of various factors on sorption process were optimized using response surface methodology (RSM). Regeneration potential of AMA has been demonstrated for 10 adsorption-desorption cycles, showing more than 60% efficiency in tenth cycle. The AMA composite shows E-factor value 0.004 depicting it is sustainable in environment. In short, this novel composite showed excellent morphological, magnetic, functional properties that led to enhanced adsorption efficiency in short span of time that can be regenerated and reused in multiple cycles.

Removal of fluoroquinolone antibiotic and sulfonated dye by functionalized Persea americana seed powder: Appraisal on phase transfer kinetics, equilibrium, economics, and applications in rural settings.

The study focuses on reactive orange 16 (RO16), a sulfonated dye, and ciprofloxacin (CiP), a fluoroquinolone antibiotic treatment from aquatic surface by adsorption. The functionalized Persea americana seed powder (PASP) was developed by acid hydrolysis technique and investigated for RO16 and CiP removal in batch scale at different concentrations for CiP and RO16, pH (2-8), contact duration and temperature (303-318K). Utilizing a scanning electron microscope (SEM) with energy dispersive X-ray spectroscopy (EDAX), the generated native PASP were assessed for their morphological characteristics. Fourier transform infrared (FTIR) spectroscopy was applied to examine the performing characteristics of PASP. Experimental findings with four kinetic mathematical models allowed the estimation of the process involved in the biosorption. The most effective agreement was explained by the pseudo-second-order model and Sips isotherm (Cip = 34.603 mg/g and RO16 = 30.357 mg/g) at 303K temperature. For Cip Process economics of the biosorbent was done, and it was observed that it was less than the readily market-available activated carbon.

Composites of sodium alginate based - Functional materials towards sustainable adsorption of benzene phenol derivatives - Bisphenol A/Triclosan.

The present study evaluates the adsorption efficiency of low-cost carbonaceous adsorbents as fly ash (FA), saw dust biochar (SDB) (untreated and alkali - treated), live/dead pulverized white rot fungus Hypocrea lixii biomass encapsulated in sodium alginate (SA) against the commercially available activated carbon (AC) and graphene oxide (GO) SA beads for removal of benzene phenol derivatives - Bisphenol A (BPA)/triclosan (TCS). Amongst bi - and tri - composites SA beads, tri-composite beads comprising of untreated flyash - dead fungal biomass - sodium alginate (UFA - DB - SA) showed at par results with commercial composite beads. The tri - composite beads with point zero charge (Ppzc) of 6.2 was characterized using FTIR, XRD, surface area BET and SEM-EDX. The batch adsorption using tri - composite beads revealed removal of 93% BPA with adsorption capacity of 16.6 mg/g (pH 6) and 83.72% TCS with adsorption capacity of 14.23 mg/g (pH 5), respectively at 50 ppm initial concentration with 6 % adsorbent dose in 5 h. Freundlich isotherm favoring multilayered adsorption provided a better fit with r2 of 0.9674 for BPA and 0.9605 for TCS respectively. Intraparticle diffusion model showed adsorption of BPA/TCS molecules to follow pseudo - second order kinetics with boundary layer diffusion governed by first step of fast adsorption and intraparticle diffusion within pores by second slow adsorption step. Thermodynamic parameters (ΔH°, ΔS°, ΔG°) revealed adsorption process as exothermic, orderly and spontaneous. Methanol showed better desorbing efficiency leading to five cycles reusability. The phytotoxicity assay revealed increased germination rate of mung bean (Vigna radiata) seeds, sprinkled with post adsorbed treated water (0 h, 5 h and 7 h) initially spiked with 50 ppm BPA/TCS. Overall, UFA - DB - SA tri - composite beads provides a cost effective and eco - friendly matrix for effective removal of hydrophobic recalcitrant compounds.

Adsorption of trace heavy metals through organic compounds enriched biochar using isotherm adsorption and kinetic models.

Trace heavy metals such as copper and nickel, when exceeds a certain level, cause detrimental effects on the ecosystem. The current study examined the potential of organic compounds enriched rice husk biochar (OCEB's) to remove the trace heavy metals from an aqueous solution in four steps. In 1st step, biochar' physical and chemical properties were analyzed through scanning electron microscope (SEM) and Fourier transforms infrared spectroscopy (FTIR). In the 2nd step, two biochar vis-a-vis glycine, alanine enriched biochar (GBC, ABC) was selected based on their adsorption capacity of four different metals Cr, Cu, Ni and Pb (chromium, copper, nickel, and lead). These two adsorbents (GBC, ABC) were further used to evaluate the best interaction of biochar for metal immobilization based on varying concentrations and times. Langmuir isotherm model suggested that the adsorption of Ni and Cu on the adsorbent surface supported the monolayer sorption. The qmax value of GBC for Cu removal increased by 90% compared to SBC (Simple rice husk biochar). The interaction of Cu and Ni with GBC and ABC was chemical, and 10 different time intervals were studied using pseud first and second-order kinetics models. The current study has supported the pseudo second-order kinetic model, which exhibited that the sorption of Ni and Cu occurred due to the chemical processes. The % removal efficiency with GBC was enhanced by 21% and 30% for Cu and Ni, respectively compared to the SBC. It was also noticed that GBC was 21% more efficient for % removal efficiency than the CBC. The study's findings supported that organic compound enriched rice husk biochar (GBC and ABC) is better than SBC for immobilizing the trace heavy metals from an aqueous solution.

Magnetic biochar as a revolutionizing approach for diverse dye pollutants elimination: A comprehensive review.

The term "biomass" encompasses all substances found in the natural world that were once alive or derived from living organisms or their byproducts. These substances consist of organic molecules containing hydrogen, typically oxygen, frequently nitrogen, and small amounts of heavy, alkaline earth and alkali metals. Magnetic biochar refers to a type of material derived from biomass that has been magnetized typically by adding magnetic components such as magnetic iron oxides to display magnetic properties. These materials are extensively applicable in widespread areas like environmental remediation and catalysis. The magnetic properties of these compounds made them ideal for practical applications through their easy separation from a reaction mixture or environmental sample by applying a magnetic field. With the evolving global strategy focused on protecting the planet and moving towards a circular, cost-effective economy, natural compounds, and biomass have become particularly important in the field of biochemistry. The current research explores a comparative analysis of the versatility and potential of biomass for eliminating dyes as a sustainable, economical, easy, compatible, and biodegradable method. The elimination study focused on the removal of various dyes as pollutants. Various operational parameters which influenced the dye removal process were also discussed. Furthermore, the research explained, in detail, adsorption kinetic models, types of isotherms, and desorption properties of magnetic biochar adsorbents. This comprehensive review offers an advanced framework for the effective use of magnetic biochar, removing dyes from textile wastewater.

Unraveling the mechanism of iodate adsorption by anthocyanin-rich fruit waste as green adsorbents for Applications of radioactive iodine remediation in water environment.

In aquatic settings, radioactive iodine from nuclear waste can exist as iodate (IO3-). This study explored the efficiency and mechanism of IO3- adsorption by minimally modified anthocyanin-based adsorbents. Pomegranate peels and mangosteen pericarps were selected from an initial screening test and could remove over 70% of 10 mg/L IO3-. The adsorbents yielded adsorption capacity (q) of 9.59 mg/g and 2.31 mg/g, respectively, at room temperature. At 5 °C, q values increased to 14.5 and 5.13 mg/g, respectively. Pomegranate peels showed superior performance, with approximately 4 times the anthocyanin content of mangosteen pericarps. Both adsorbents took 120 min to reach adsorption equilibrium, and no desorption was observed after 8 days (I-131 half-time). Confirmation of physisorption was indicated by the fit of the pseudo-first-order reaction model, negative entropy (exothermic), and negative activation energy (Arrhenius equation). IO3- inclusion was confirmed through adsorbent surface modifications in scanning electron microscope images, the increased iodine content post-adsorption in energy-dispersive X-ray spectroscopy analysis, and alterations in peaks corresponding to anthocyanin-related functional groups in Fourier transform infrared spectroscopy analysis. X-ray absorption near-edge spectroscopy at 4564.54 eV showed that iodine was retained in the form of IO3-. Through the computational analysis, electrostatic forces, hydrogen bonds, and π-halogen interactions were deduced as mechanisms of IO3- adsorption by anthocyanin-based adsorbents. Anthocyanin-rich fruit wastes emerged as sustainable materials for eliminating IO3- from water.

Zinc oxide decorated plantain peel activated carbon for adsorption of cationic malachite green dye: Mechanistic, kinetics and thermodynamics modeling.

Reports have shown that malachite green (MG) dye causes various hormonal disruptions and health hazards, hence, its removal from water has become a top priority. In this work, zinc oxide decorated plantain peels activated carbon (ZnO@PPAC) was developed via a hydrothermal approach. Physicochemical characterization of the ZnO@PPAC nanocomposite with a 205.2 m2/g surface area, porosity of 614.68 and dominance of acidic sites from Boehm study established the potency of ZnO@PPAC. Spectroscopic characterization of ZnO@PPAC vis-a-viz thermal gravimetric analyses (TGA), Fourier Transform Infrared Spectroscopy (FTIR), Powdered X-ray Diffraction (PXRD), Scanning Electron Microscopy and High Resolution - Transmission Electron Microscopy (HR-TEM) depict the thermal stability via phase transition, functional group, crystallinity with interspatial spacing, morphology and spherical and nano-rod-like shape of the ZnO@PPAC heterostructure with electron mapping respectively. Adsorption of malachite green dye onto ZnO@PPAC nanocomposite was influenced by different operational parameters. Equilibrium data across the three temperatures (303, 313, and 323 K) were most favorably described by Freundlich indicating the ZnO@PPAC heterogeneous nature. 77.517 mg/g monolayer capacity of ZnO@PPAC was superior to other adsorbents compared. Pore-diffusion predominated in the mechanism and kinetic data best fit the pseudo-second-order. Thermodynamics studies showed the feasible, endothermic, and spontaneous nature of the sequestration. The ZnO@PPAC was therefore shown to be a sustainable and efficient material for MG dye uptake and hereby endorsed for the treatment of industrial effluent.

High efficiency of treated-phengite clay by sodium hydroxide for the Congo red dye adsorption: Optimization, cost estimation, and mechanism study.

Wastewater textile dye treatment is a challenge that requires the development of eco-friendly technology to avoid the alarming problems associated with water scarcity and health-environment. This study investigated the potential of phengite clay as naturally low-cost abundant clay from Tamgroute, Morocco (TMG) that was activated with a 0.1 M NaOH base (TMGB) after calcination at 850 °C for 3 h (TMGC) before its application in the Congo red (CR) anionic dye from the aqueous solution. The effect of various key operational parameters: adsorbent dose, contact time, dye concentration, pH, temperature, and the effect of salts, was studied by a series of adsorption experiments in a batch system, which affected the adsorption performance of TMG, TMGC, and TMGB for CR dye removal. In addition, the properties of adsorption kinetics, isotherms, and thermodynamics were also studied. Experimental results showed that optimal adsorption occurred at an acidic pH. At a CR concentration of 100 mg L-1, equilibrium elimination rates were 68%, 38%, and 92% for TMG, TMGC, and TMGB, respectively. The adsorption process is rapid, follows pseudo-second-order kinetics, and is best described by a Temkin and Langmuir isotherm. The thermodynamic parameters indicated that the adsorption of CR onto TMGB is endothermic and spontaneous. The experimental values of CR adsorption on TMGB are consistent with the predictions of the response surface methodology. These led to a maximum removal rate of 99.97% under the following conditions: pH = 2, TMGB dose of 7 g L-1, and CR concentration of 50 mg L-1. The adsorbent TMGB's relatively low preparation cost of around $2.629 g-1 and its ability to regenerate in more than 6 thermal calcination cycles with a CR removal rate of around 56.98%, stimulate its use for textile effluent treatment on a pilot industrial scale.

Enhanced photocatalytic degradation of polycyclic aromatic hydrocarbons (PAHs) Using NiO nanoparticles.

The oncogenic and genetic properties of anthracene, a member of the polycyclic aromatic hydrocarbons (PAHs) family, pose a significant health threat to humans. This study aims to investigate the photocatalytic decomposition of anthracene under various conditions, such as different concentrations of PAHs, varying amounts of NiO (nickel oxide) nanoparticles, and different pH levels under ultraviolet light and sunlight. The synthesized NiO nanoparticles showed surface plasma resonance at 230 and 360 nm, while XRD and SEM analysis confirmed the nanoparticles were cubic crystalline in structure with sizes ranging between 37 and 126 nm. NiO nanoparticles exhibited 79% degradation of pyrene at 2 µg/mL of anthracene within 60 min of treatment. NiO at 10 µg/mL concentration showed significant adsorption of 57%, while the adsorption method worked efficiently (72%) at 5 pH. Photocatalytic degradation was confirmed by isotherm and kinetic studies through monolayer adsorption and pseudo-first-order kinetics. Further, the absorption process was confirmed by performing GC-MS analysis of the NiO nanoparticles. On the other hand, NiO nanoparticles showed antimicrobial activity against Gram negative and Gram-positive bacteria. Therefore, the present work is one of its kind proving the dual application of NiO nanoparticles, which makes them suitable candidates for bioremediation by treating PAHs and killing pathogenic bacteria.

Measurement of Neuropeptide Y in Aptamer-Modified Planar Electrodes.

Electrochemical impedance spectroscopy (EIS) is a powerful technique for studying the interaction at electrode/solution interfaces. The adoption of EIS for obtaining analytical signals in biosensors based on aptamers is gaining popularity because of its advantageous characteristics for molecular recognition. Neuropeptide Y (NPY), the most abundant neuropeptide in the body, plays a crucial role with its stress-relieving properties. Quantitative measurement of NPY is imperative for understanding its role in these and other biological processes. Although aptamer-modified electrodes for NPY detection using EIS present a promising alternative, the correlation between the data obtained and the adsorption process on the electrodes is not fully understood. Various studies utilize the change in charge transfer resistance when employing an active redox label. In contrast, label-free measurement relies on changes in capacitance. To address these challenges, we focused on the interaction between aptamer-modified planar electrodes and their target, NPY. We proposed utilizing -ω*Zimag as the analytical signal, which facilitated the analysis of the adsorption process using an analogous Langmuir isotherm equation. This approach differs from implantable microelectrodes, which adhere to the Freundlich adsorption isotherm. Notably, our method obviates the need for a redox label and enables the detection of NPY at concentrations as low as 20 pg/mL. This methodology demonstrated exceptional selectivity, exhibiting a signal difference of over 20-to-1 against potential interfering molecules.

Comparative study of pb(II) and cr(VI) removal using Cassava peel (Manihot Esculenta Crantz).

The present study investigated the capability of cassava peel (Manihot Esculenta Crantz) in Pb(II) and Cr(VI) removal. The comparative study was conducted using batch method observing some parameters. The results indicated that the optimum adsorption of Pb(II) occurred at pH 5, initial concentration of 1000 mg/L, and contact time of 50 min. On the other hand, the optimal adsorption of Cr(VI) was achieved at pH 2, initial concentration of 1200 mg/L, and contact time of 70 min. The adsorption isotherms of both metals tended to follow the Langmuir model, while the adsorption kinetics suited to pseudo-second-order model. Thermodynamic parameters indicated that the adsorption process was spontaneous (ΔG° negative), endothermic (ΔH° positive), and exhibited surface dispersion on the biosorbent (ΔS° positive). Characterization using Fourier Transform Infrared (FTIR), X-Ray Fluorescence (XRF), Scanning Electron Microscopy (SEM), and Thermogravimetry (TGA) provided evidence of both physical and chemical adsorption. The adsorption capacity of cassava peel was also tested on samples collected approximately 30 m from the bay shoreline, resulting in a removal percentage of 94.67% for Pb(II) and 82.28% for Cr(VI) under optimal pH and contact time conditions.

Enhanced CO2 Capture Potential of Chitosan-Based Composite Beads by Adding Activated Carbon from Coffee Grounds and Crosslinking with Epichlorohydrin.

Carbon dioxide (CO2) capture has been identified as a potential technology for reducing the anthropic emissions of greenhouse gases, particularly in post-combustion processes. The development of adsorbents for carbon capture and storage is expanding at a rapid rate. This article presents a novel sustainable synthesis method for the production of chitosan/activated carbon CO2 adsorbents. Chitosan is a biopolymer that is naturally abundant and contains amino groups (-NH2), which are required for the selective adsorption of CO2. Spent coffee grounds have been considered as a potential feedstock for the synthesis of activated coffee grounds through carbonization and chemical activation. The chitosan/activated coffee ground composite microspheres were created using the emulsion cross-linking method with epichlorohydrin. The effects of the amount of chitosan (15, 20, and 25 g), activated coffee ground (10, 20, 30, and 40%w/w), and epichlorohydrin (2, 3, 4, 5, 6, 7 and 8 g) were examined. The CO2 capture potential of the composite beads is superior to that of the neat biopolymer beads. The CO2 adsorbed of synthesized materials at a standard temperature and pressure is improved by increasing the quantity of activated coffee ground and epichlorohydrin. These findings suggest that the novel composite bead has the potential to be applied in CO2 separation applications.

Recovery and separation of glycyrrhizic acid from Natural Deep Eutectic Solvent (NADES) extract by macroporous resin: adsorption kinetics and isotherm studies.

Natural Deep Eutectic Solvents (NADESs) have emerged as a green and sustainable alternative to conventional organic solvents to extract bioactive compounds. However, the recovery of bioactive compounds from the NADES extracts is challenging, restricting their large-scale applications. The present work investigated the recovery of glycyrrhizic acid (GA) from choline-chloride/lactic acid NADES extract using macroporous resins. GA possesses a wide spectrum of biological activities, and it is extracted from the well-known herb Glycyrrhiza glabra. During resin screening, DIAIONTM SP700 showed high adsorption and desorption capacities. The adsorption kinetics study demonstrated that the adsorption of GA on SP700 followed Pseudo First-order kinetic model. Moreover, the adsorption behaviors were elucidated by the Freundlich isotherm using a correlation coefficient based on a static adsorption study at different temperatures and pH. Furthermore, the thermodynamic parameters, for instance, the change of Gibbs free energy (ΔG*), entropy (ΔS*), and enthalpy (ΔH*), showed that the adsorption process was spontaneous, favorable and exothermic. In addition, the sample after macroporous resin treatment, which is enriched with GA exhibited good anticancer potential analyzed by SRB assay. The regenerated NADES solvent was recycled twice, keeping more than 90% extraction efficiency, indicating good reusability of NADES in the GA extraction process by using macroporous resin.

Sequestration of an Azo Dye by a Potential Biosorbent: Characterization of Biosorbent, Adsorption Isotherm and Adsorption Kinetic Studies.

This study explores the detailed characterization of a biosorbent (Hen Feather) and its efficient use in eradicating the azo dye Metanil Yellow (MY) from its aqueous solutions. Effects of a range of experimental parameters, including pH, initial dye concentration, biosorbent dosage and contact time on the adsorption, were studied. A detailed physical and chemical characterization of the biosorbent was made using SEM, XRD, XPS and FTIR. During the optimization of adsorption parameters, the highest dye uptake of almost 99% was recorded at pH 2, dye concentration 2 × 10-5 M, 0.05 g of biosorbent and a contact period of 75 min. Various adsorption isotherm models were studied to gather different adsorption and thermodynamic parameters. The linearity of the Langmuir, Freundlich and D-R adsorption isotherms indicate homogeneous, multilayer chemisorption with high adsorption affinity between the dye and biosorbent. Values of the changes in the Gibbs free energy (ΔG°) and the enthalpy (ΔH°) of the adsorption process have been calculated, these values indicate that it is a spontaneous and endothermic process. Kinetics of the adsorption were also measured, and it was established that the adsorption of MY over Hen Feather follows a pseudo-second-order kinetic model at temperatures 30, 40 and 50 °C. The findings of this investigation clearly indicate that the studied biosorbent exhibits a high affinity towards the dye (MY), and it can be effectively, economically and efficiently used to sequestrate and eradicate MY from its aqueous solutions.

Tetraethylenepentamine-Grafted Amino Terephthalic Acid-Modified Activated Carbon as a Novel Adsorbent for Efficient Removal of Toxic Pb(II) from Water.

In this study, a new composite, tetraethylenepentamine (TEPA), was incorporated into amino terephthalic acid-modified activated carbon (ATA@AC) through a one-pot integration of TEPA with the COOH moiety of ATA@AC. This process resulted in the creation of a TEPA@ATA@AC composite for Pb(II) removal from an aquatic environment. Several techniques, including SEM, EDX, FT-IR, TGA, XRD, and Zeta potential, were employed to emphasize the chemical composition, morphology, and thermal durability of the as-synthesized TEPA@ATA@AC composite. The impact of experimental variables on the adsorption of Pb(II) ions was studied using batch adsorption. The uptake assessment suggested that the TEPA@ATA@AC composite exhibited superior Pb(II) removal performance with high removal efficiency (97.65%) at pH = 6.5, dosage = 0.02 g, equilibrium time = 300 min, and temperature = 298 K. The isotherm data exhibited good conformity with the Langmuir isotherm model, whereas the kinetics data displayed strong agreement with both pseudo-first-order and pseudo-second-order kinetics models. This reflected that the Pb((II) uptake by the TEPA@ATA@AC composite was caused by physisorption coupled with limited chemisorption. The greatest monolayer uptake capacity of the TEPA@ATA@AC composite was 432.8 mg/g. The thermodynamic findings indicated that the Pb(II) uptake on the TEPA@ATA@AC composite was an exothermic and feasible process. After five adsorption-desorption runs, the TEPA@ATA@AC composite maintained a superior uptake capacity (83.80%). In summary, the TEPA@ATA@AC composite shows promise as a potent adsorbent for effectively removing Cr(VI) from contaminated water, with impressive removal efficiency.

A Study on the Adsorption of Rhodamine B onto Adsorbents Prepared from Low-Carbon Fossils: Kinetic, Isotherm, and Thermodynamic Analyses.

The aim of this study was to obtain a series of activated carbon samples by the chemical activation of low-rank coal. The precursor was impregnated with a NaOH solution. Activated carbons were characterized by determining their textural parameters and content of surface oxygen functional groups and by using an elemental analysis. The carbons were tested as potential adsorbents for the removal of liquid pollutants represented by rhodamine B. The effectiveness of rhodamine B removal from water solutions depended on the initial concentration of the dye, the mass of rhodamine B, and the pH and temperature of the reaction. The isotherm examination followed the Langmuir isotherm model. The maximum adsorption capacity of the rhodamine B was 119 mg/g. The kinetic investigation favored the pseudo-second-order model, indicating a chemisorption mechanism. The thermodynamic assessment indicated spontaneous and endothermic adsorption, with decreased randomness at the solid-liquid interface. The experiment revealed that a 0.1 M HCl solution was the most effective regenerative agent.