A Regulable Polyporous Graphite/Melamine Foam for Heat Conduction, Sound Absorption and Electromagnetic Wave Absorption.

To reduce electromagnetic interference and noise pollution within communication base stations and servers, it is necessary for electromagnetic wave absorption (EWA) materials to transition from coating to multifunctional devices. Up to now, the stable and effective integration of multiple functions into one material by a simple method has remained a large challenge. Herein, a foam-type microwave absorption device assembled with multicomponent organic matter and graphite powder is synthesized by a universal combination process. Melamine and phenolic aldehyde amine work as the skeleton and cementing compound, respectively, in which graphite is embedded in the cementing compound interconnected into the mesoscopic 3D electric conductive and heat conductive network. Interestingly, the prepared flexible graphite/melamine foam (CMF) delivers a great EWA performance, with a great effective absorption bandwidth of 9.8 GHz, ultrathin thickness of 2.60 mm, and a strong absorption reflection loss of -41.7 dB. Moreover, the CMF possesses porosity and flexibility, endowing it with sound absorption ability. The CMF is unique in its integration of EWA, heat conduction, sound absorption, and mechanical robustness, as well as its cost-effective and scalable manufacturing. These attributes make CMF promising as a multifunctional device widely used in communication base stations, servers, and chips protection.

MOF-Derived CoSe2 Nanoparticles/Carbonized Melamine Foam as Catalytic Cathode Enabling Flexible Li-CO2 Batteries with High Energy Efficiency and Stable Cycling.

Rechargeable aprotic Li-CO2 batteries have aroused worldwide interest owing to their environmentally friendly CO2 fixation ability and ultra-high specific energy density. However, its practical applications are impeded by the sluggish reaction kinetics and discharge product accumulation during cycling. Herein, a flexible composite electrode comprising CoSe2 nanoparticles embedded in 3D carbonized melamine foam (CoSe2/CMF) for Li-CO2 batteries is reported. The abundant CoSe2 clusters can not only facilitate CO2 reduction/evolution kinetics but also serve as Li2CO3 nucleation sites for homogeneous discharge product growth. The CoSe2/CMF-based Li-CO2 battery exhibits a large initial discharge capacity as high as 5.62 mAh cm-2 at 0.05 mA cm-2, a remarkably small voltage gap of 0.72 V, and an ultrahigh energy efficiency of 85.9% at 0.01 mA cm-2, surpassing most of the noble metal-based catalysts. Meanwhile, the battery demonstrates excellent cycling stability of 1620 h (162 cycles) at 0.02 mA cm-2 with an average overpotential of 0.98 V and energy efficiency of 85.4%. Theoretical investigations suggest that this outstanding performance is attributed to the suitable CO2/Li adsorption and low Li2CO3 decomposition energy. Moreover, flexible Li-CO2 pouch cell with CoSe2/CMF cathode displays stable power output under different bending deformations, showing promising potential in wearable electronic devices.

Cobalt and nitrogen co-doped monolithic carbon foam for ultrafast degradation of emerging organic pollutants via peroxymonosulfate activation.

Cobalt-based catalysts are expected as one of the most promising peroxymonosulfate (PMS) activators for the removal of organic pollutants from industrial wastewater. However, the easy agglomeration, difficult separation, and secondary pollution of cobalt ions limit their practical application. In this study, a novel, highly efficient, reusable cobalt and nitrogen co-doped monolithic carbon foam (Co-N-CMF) was utilized to activate PMS for ultrafast pollutant degradation. Co-N-CMF (0.2 g/L) showed ultrafast catalytic kinetics and higher total organic carbon (TOC) removal efficiency. Bisphenol A, ciprofloxacin, 2,4-dichlorophenoxyacetic acid, and 2,4-dichlorophenol could be completely degraded after 2, 4, 5, and 5 min, and the TOC removal efficiencies were 77.4 %, 68.9 %, 72.8 %, and 79.8 %, respectively, corresponding to the above pollution. The sulfate radical (SO4•-) was the main reactive oxygen species in Co-N-CMF/PMS based on electron paramagnetic resonance. The ecological structure-activity relationship program analysis via the quantitative structure activity relationship analysis and phytotoxicity assessment revealed that the Co-N-CMF/PMS system demonstrates good ecological safety and ecological compatibility. The Co-N-CMF catalyst has good catalytic activity and facile recycling, which provides a fine method with excellent PMS activation capacity for 2,4-dichlorophenol elimination from simulated industrial wastewater. This study provides new insights into the development of monolithic catalysts for ultrafast wastewater treatment via PMS activation.

Melamine Foam-Derived Carbon Scaffold for Dendrite-Free and Stable Zinc Metal Anode.

Aqueous Zn-ion batteries (AZIBs) are one of the most promising large-scale energy storage devices due to the excellent characteristics of zinc metal anode, including high theoretical capacity, high safety and low cost. Nevertheless, the large-scale applications of AZIBs are mainly limited by uncontrollable Zn deposition and notorious Zn dendritic growth, resulting in low plating/stripping coulombic efficiency and unsatisfactory cyclic stability. To address these issues, herein, a carbon foam (CF) was fabricated via melamine-foam carbonization as a scaffold for a dendrite-free and stable Zn anode. Results showed that the abundant zincophilicity functional groups and conductive three-dimensional network of this carbon foam could effectively regulate Zn deposition and alleviate the Zn anode's volume expansion during cycling. Consequently, the symmetric cell with CF@Zn electrode exhibited lower voltage hysteresis (32.4 mV) and longer cycling performance (750 h) than the pure Zn symmetric cell at 1 mA cm-2 and 1 mAh cm-2. Furthermore, the full battery coupling CF@Zn anode with MnO2 cathode can exhibit a higher initial capacity and better cyclic performance than the one with the bare Zn anode. This work brings a new idea for the design of three-dimensional (3D) current collectors for stable zinc metal anode toward high-performance AZIBs.

A semi-automatic solid phase extraction system based on MIL-101(Cr) foam-filled syringe for detection of triazines in vegetable oils.

In this study, several metal-organic framework-melamine foam columns were first developed and used as a laboratory-made semi-automatic solid phase extraction packed in syringe adsorber for the extraction of six triazine herbicides from vegetable oil samples coupled to high-performance liquid chromatography-tandem mass spectrometry. The metal-organic framework-foam columns were prepared using a simple approach by embedding the solid particles in melamine foam using polyvinylidene difluoride physical encapsulation. The method was applicable to a wide variety of metal-organic framework materials, and the incorporated materials retained their unique properties. Key factors that affect the extraction efficiency, including the MIL-101(Cr) amount, sample flow rate, type and volume of the eluting solvent, and flow rate of eluting solvent, were investigated. Under optimum conditions, the proposed method exhibited low limits of detection (0.017-0.096 ng/mL, S/N = 3) for six triazines. The relative standard deviations calculated for all herbicides ranged from 0.2 to 14.9%. This study demonstrated that the MIL-101(Cr)-foam column can be used as a high-quality adsorption material for the detection of triazines in vegetable oils.

Superior capacity and easy separation of zirconium functionalized chitosan melamine foam for antimony(III/V) removal.

Nowadays, highly toxic antimony has severely posed threat to water sources and jeopardized human health. Fabricating adsorbents with the capability of easy separation, high efficiency and large adsorption capacity remains a major challenge. In this paper, zirconium functionalized chitosan melamine foam (ZCMF) was fabricated with zirconium and chitosan crosslinked onto melamine foam, then utilized for the removal of antimony(III/V) in water. The characterization of SEM and EDS collectively showed that ZCMF has a porous structure which could boost the mass transfer rate and zirconium ions on the surface could provide plentiful active adsorption sites. Systematic adsorption experiments demonstrated that the experimental data of Sb(III) and Sb(V) were consistent with the pseudo-second-order and Elovich kinetic models, respectively, and the Langmuir maximum adsorption capacities were separately 255.35 mg g-1 (Sb(III)) and 414.41 mg g-1 (Sb(V)), which displayed prominent performance among adsorbents derived from biomass. Combining the XPS and FTIR characterization with experimental data, it is rational to speculate that ZCMF could remove Sb from aqueous solution through ligand exchange, electrostatic attraction, and surface complexation mechanisms. ZCMF exhibited excellent performance, including large adsorption capacity, easy separation, facile preparation and eco-friendliness. It could be a promising new adsorbent for the treatment of antimony-containing wastewater.

Melamine Network as a Solution for Significant Enhancement of the Mechanical, Adsorptive, and Surface Properties in a Novel Carbon Nanomaterial-Silica Aerogel Composite.

Silica aerogels exhibit exceptional characteristics such as mesoporosity, light weight, high surface area, and pore volume. Nevertheless, their utilization in industrial settings remains constrained due to their brittleness, moisture sensitivity, and costly synthesis procedure. Several studies have proved that adding nanofillers, such as carbon nanotubes (CNT) or graphene nanoplatelets (GNP), can improve the mechanical strength of the aerogels. The incorporation of nanofillers is often accompanied by agglomeration and pore blockage, which, in turn, deteriorates the surface area, pore volume, and low density. Including flexible melamine foam (MF) as a scaffold for the silica aerogel and nanofiller composite can prevent the restacking of the nanofillers through π-π interaction, hence maintaining the incredible properties of aerogels and improving their mechanical properties. CNT, GNP, and the polymeric silica precursor, polyvinyltrimethoxysilane (PVTMS), were added to a MF, at varying concentrations, to fabricate the MF-aerogel nanocomposites. Surfactant and sonication were utilized to ensure a homogeneous dispersion of the nanofillers in the system. The presence of MF prevented the agglomeration of nanofillers, resulting in lower density and relatively higher surface properties (SBET up to 929 m2·g-1 and pore volume up to 4.34 cc·g-1). Moreover, the MF-supported samples could endure 80% strain without breakage and showed an outstanding compressive strength of up to ∼20 MPa. These aerogel nanocomposites also demonstrated an excellent volatile organic compound (∼2680 mg·g-1) and cationic dye adsorption (∼10 mg·g-1).

Activated nanosulfur for broad-spectrum heavy metals capture.

Current problems of existing heavy metal-removing technologies, especially for nanomaterials-based ones, are typically single metal ion-specific, high-cost and collected difficult. Herein, facile modification of commercial sulfur creates a versatile adsorbent platform to address challenges. The versatile adsorbent can be easily prepared through solvothermal treatment of a saturated commercial sulfur solution, followed by water precipitation on a commercial foam that eliminates the need for separation. Interestingly, the solvothermal treatment endows the resulting nanosulfur with sulfate acid groups (hard Lewis base), sulfur anions (soft base), and sulfite groups (borderline base), promising the coordination of all types of heavy metal ions (Lewis acids). As such, this versatile adsorbent with well-distributed adsorption sites exhibits highly effective heavy metal adsorption capacity towards diverse heavy metal ions for both single-component and multi-component adsorption, including soft, hard, borderline Lewis metal ions, with ultra-high adsorption ability (e.g., 903.79 mg g-1 for Cu2+). These findings highlighted the potential of this low-cost sulfur-based adsorbent to address the arising challenges in ensuring clean water.

Recent progress in surface engineering methods and advanced applications of flexible polymeric foams.

Polymeric foams, also known as three-dimensional (3D) polymeric sponges, are lightweight, flexible, compressible, and possess a high surface area compared with other bulk polymers. These sponges have traditionally been used for mattresses or seat cushions in homes, offices, aircraft, automobiles, and trains, and to insulate against heat, electricity, and noise. Recently, the demand for modern materials has expanded the application of polymeric foams to various high-value technologies, including in areas that need high flame retardancy, flame sensors, oil/water separation, metal adsorption, solar steam generation, piezoresistivity, electromagnetic interference shielding, thermal energy storage, catalysis, supercapacitors, batteries, and triboelectric energy harvesting. Proper modification of foams is a prerequisite for their use in high-value applications. Several new strategies for the surface coating of 3D porous foams and novel emerging applications have been recently developed. Therefore, in this review, current advances in the field of surface coating and the application of 3D polymeric foams are discussed. A brief background on 3D polymeric foams, including the unique properties and benefits of polymeric sponges and their routes of synthesis, is presented. Different coating strategies for polymeric sponges are discussed, and their advantages and drawbacks are highlighted. Different advanced applications of polymeric sponges, in conjunction with specific and detailed examples of the above-mentioned applications, are also described. Finally, challenges and potential applications related to the coating of polymeric foams are discussed. We envisage that this review will be useful to facilitate further research, promote continued efforts on the advanced applications mentioned above, and provide new stimuli for the design of novel polymeric sponges for future modern applications.

Effect of melamine foam cleaning on the surface condition of composite resin artificial teeth.

PURPOSE: The purpose of this study was to examine the abrasive and cleaning effects of melamine foam and other cleaning agents on the surfaces of composite resin artificial tooth specimens. MATERIALS AND METHODS: A stained composite resin artificial tooth in a used denture was cleaned using a denture brush and melamine foam, and the stain removal effect was evaluated macroscopically. Next, 5 types of cleaning material (fourfold-compression melamine foam, MEL; brush with water, BRU; denture dentifrice without abrasive, POL; denture dentifrice with abrasive, TAF; conventional dentifrice, AQU) and 15 plate-shaped specimens made of composite resin for artificial teeth were used for wear tests. The surface roughness was measured using a laser scanning microscope. Furthermore, the surface properties were observed using a digital microscope. Surface roughness data were analyzed by two-way ANOVA followed by Tukey's test. RESULTS: Artificial tooth stains that could not be removed by brushing became removable using melamine foam. With regard to surface roughness in the context of the wear test, significant differences were not indicated between MEL and POL, whereas BRU-, TAF-, and AQU-treated specimens showed significantly increased surface roughness (p < 0.05). In the comparison among the cleaning materials, TAF- and AQU-treated specimens showed significantly rougher surfaces than those treated with MEL, BRU, and POL (p < 0.05). CONCLUSIONS: Macroscopic observations suggest that melamine foam would be effective for the removal of stains on composite resin artificial teeth. Traces of wear were not observed in specimens treated with melamine foam and the denture dentifrice not containing abrasives. It was suggested that these two materials would be desirable and useful to use for composite resin tooth cleaning.

Zeolitic imidazolate framework-L loaded on melamine foam for removal tetracycline hydrochloride from water.

Zeolitic imidazolate framework-L/melamine foam (ZIF-L/MF) is fabricated by an in situ growth method to treat the tetracycline hydrochloride in wastewater. The results show that a large amount of leaf-like ZIF-L is vertically grown on the MF surface. ZIF-L/MF exhibits well adsorption performance with a maximum adsorption ability of 1346 mg/g. The pseudo-second-order kinetic model and the Langmuir isotherm model are used to describe the adsorption process well. In addition, the influences of pH and coexisting ions are studied. According to the experimental data and analysis, the adsorption mechanisms may involve H-bonding, π-π interaction, and weak electrostatic interaction. A dynamic adsorption experiment is also performed, and the results show that the time required to achieve the same removal efficiency as static adsorption is reduced by half. This work shows that the obtained ZIF-L/MF has practical applications in antibiotic adsorption.

Hydrophobic surface modification and characterization of melamine foam.

Superhydrophobic and oleophilic modification of commercial acoustic melamine foam (MF) was made in this study. The modification was carried out with chitosan (CHI) and silica particles (SiO2), by using both a layer-by-layer-like approach (LbL) and dip coating technique. Subsequently, 1-octadecanethiol was used as a secondary modification agent. QCM-D, SEM, and FTIR analyses confirmed that the coating was successfully performed. After the modification, the column wall thicknesses increased than that of MF and they ranged from 25% to 48% for modified MF with an LbL-like approach (MMF) and modified MF via dip coating technique (MMFd), respectively. The sorption experiments showed that modified MFs, which had a water contact angle (WCA) above 160°, could sorb several model pollutants (vegetable oil, chloroform, ethanol, and toluene) up to 76-130 times their original weight. It had been determined that MMF protects its open-pore structure better than that of MMFd, which indicated that MF has a more uniform pore structure after modification. Furthermore, after 10 cycles of the sorption and release process, there was no significant change in sorption capacity, and they preserved their mechanical stability and flexibility.

Catalytic metal-organic framework-melamine foam composite as an efficient material for the elimination of organic pollutants.

Water-insoluble organic pollutants in environment, such as sea oil spill, industrial reagents, and the abused organic pesticides, bring great risks to global water systems, which thus requires effective approaches for organic pollutant elimination. In this study, we report a catalytic metal-organic framework (MOF)-melamine foam (MF) composite material (DDT-UiO-66-NH2@MF) showing excellent oil-water separation performance and enzyme-like degradation ability toward organophosphorus pesticides. The fabrication of DDT-UiO-66-NH2@MF is based on the immobilization of a MOF-derived nanozyme (UiO-66-NH2) on MF sponge, and followed by the hydrophobic modification of UiO-66-NH2 by 1-dodecanethiol (DDT). The obtained DDT-UiO-66-NH2@MF thus displayed superhydrophobic/superhydrophilic property with a high water contact angle (WCA = 144.6°) and specific adsorption capacity toward various oils/organic solvents (62.2-119.8 g/g), which leads to a continuous oil-water separation on a simple device. In the meanwhile, owing to the enzyme-like property of UiO-66-NH2, DDT-UiO-66-NH2@MF also displayed good ability to hydrolyze paraoxon under mild conditions, which facilitates the elimination of toxic pesticide residuals in water systems. This work provides a simple, efficient, and green approach for the separation and treatment of water-insoluble organic pollutants, as well as expands the use of MOFs-MF sponge composite materials in environmental sustainability.

Metal-organic frameworks modified melamine foam in pipette-tip for rapid solid-phase extraction of organophosphorus pesticides in fruits and vegetables.

In this work, metal-organic frameworks (MOFs) including Fe-MIL-101 and Ti-MIL-125 were prepared and fixed on the melamine foam (MF) by polyvinylidene fluoride (PVDF) to prepare MF/PVDF/MOFs, which was used as adsorbents in pipette-tip solid-phase extraction (PT-SPE) for rapid extraction of organophosphorus pesticides (OPPs). Then, a gas chromatograph-flame thermionic detector (GC-FTD) was used for simultaneous analysis of Dimethoate (DMT), Iprobenfos (IBF), Parathion-methyl (PAM), and Chlorpyrifos (CPF). The morphology, crystal structure, and functional groups of MF/PVDF/MOFs were characterized, indicating that Ti-MIL-125 and Fe-MIL-101 were successfully synthesized and distributed on MF. The Fe-MIL-101 and Ti-MIL-125 showed good extraction ability for OPPs, which was mainly due to the π-π interaction and the multiple porous structures. Under the optimal conditions, the limit of detection (LODs) of four OPPs was 0.03-0.14 µg L-1 and the RSDs were less than 9.9%. The developed PT-SPE method showed a short extraction time (<3 min). The recoveries in fruits and vegetables (Celery, cabbages, and oranges) ranged from 75.3%-118.8% (RSDs<9.6%). The prepared MF/PVDF/MOFs demonstrated the efficient extraction performance of OPPs, contributing to the rapid pretreatment of OPPs from food and the environment.

Polydopamine-assisted polyethylenimine grafting melamine foam and the application in wastewater purification.

Melamine foam (MF) is a widely used commercial product and exhibits wide applications in many fields ranging from building, transportation to daily chemical product. Recent researches confirm that the special three-dimensional (3D) framework structure of MF can be an ideal substrate to prepare functional materials. In this work, the water-soluble polyethylenimine (PEI) was grafted onto the framework of MF to develop the water purification material toward heavy metal ions removal. The grafting of PEI on MF was achieved with the aids of polydopamine (PDA) coating and epoxy chloropropane (ECH) cross-linking successively. The 3D framework of MF could be well reserved and PEI was homogeneously grafted onto the framework surface. The adsorption capacity of the adsorbent was dependent upon the molecular wight of PEI. Lower PEI molecular weight endowed the adsorbent with better adsorption ability. The maximum adsorption capacity reached 328.95 mg/g, and the adsorbent exhibited extremely high adsorption stability with increasing cycling measurement numbers. Further results showed that the adsorbent also exhibited high reduction ability and induced about 62.5% toxic Cr(VI) to be reduced. This work confirms that the PEI-modified MF sample is a promising adsorbent in the removal of heavy metal ions and it can be used in wastewater treatment.

Preparation of Three-Dimensional MF/Ti3C2Tx/PmPD by Interfacial Polymerization for Efficient Hexavalent Chromium Removal.

Heavy metal pollution is a serious threat to human health and the ecological environment, but adsorption technology based on nano adsorbents can effectively treat the crisis. However, due to the nanoscale effect, nano adsorbents have some crucial shortcomings, such as recycling difficulty and the loss of nanoparticles, which seriously limit their application. The feasible assembly of nano adsorbents is an accessible technology in urgent need of a breakthrough. In this study, three-dimensional (3D) adsorbent (MF/Ti3C2Tx/PmPD) with excellent performance and favorable recyclability was prepared by interfacial polymerization with melamine foam (MF) as the framework, two-dimensional (2D) titanium carbide (Ti3C2Tx) as the bridge and Poly (m-Phenylenediamine) (PmPD) as the active nano component. The morphology, structure, mechanical property of MF/Ti3C2Tx/PmPD and reference MF/PmPD were investigated through a scanning electron microscope (SEM), Fourier transformed infrared spectra (FT-IR), Raman scattering spectra and a pressure-stress test, respectively. Owning to the regulation of Ti3C2Tx on the morphology and structure of PmPD, MF/Ti3C2Tx/PmPD showed excellent adsorption capacity (352.15 mg/g) and favorable cycling performance. R-P and pseudo-second-order kinetics models could well describe the adsorption phenomenon, indicating that the adsorption process involved a composite process of single-layer and multi-layer adsorption and was dominated by chemical adsorption. In this research, the preparation mechanism of MF/Ti3C2Tx/PmPD and the adsorption process of Cr(VI) were systematically investigated, which provided a feasible approach for the feasible assembly and application of nano adsorbents in the environmental field.

Removal of Chromium(VI) by Nanoscale Zero-Valent Iron Supported on Melamine Carbon Foam.

The overuse of chromium (Cr) has significantly negatively impacted human life and environmental sustainability. Recently, the employment of nano zero-valent iron (nZVI) for Cr(VI) removal is becoming an emerging approach. In this study, carbonized melamine foam-supported nZVI composites, prepared by a simple impregnation-carbonization-reduction method, were assessed for efficient Cr(VI) removal. The prepared composites were characterized by XPS, SEM, TEM, BET and XRD. Batch experiments at different conditions revealed that the amount of iron added, the temperature of carbonization and the initial Cr(VI) concentration were critical factors. Fe@MF-12.5-800 exhibited the highest removal efficiency of 99% Cr(VI) (10 mg/L) at neutral pH among the carbonized melamine foam-supported nZVI composites. Its iron particles were effectively soldered onto the carbonaceous surfaces within the pore networks. Moreover, Fe@MF-12.5-800 demonstrated remarkable stability (60%, 7 days) in an open environment compared with nZVI particles.

Facile preparation of melamine foam with superhydrophobic performance and its system integration with prototype equipment for the clean-up of oil spills on water surface.

A simple and efficient method was developed to rectify the surface properties of commercial melamine foam. The process was based on the siloxane coating originated from the silanization of methyltrimethoxysilane and tetraethoxysilane. The foam can be easily scaled up by employing low-cost chemicals and devices. The studies on the properties of the material showed that the wettability of melamine foam was changed to superhydrophobic with a water contact angle of 156° due to the presence of alkylsilane. The modified foam exhibited excellent oil/water selectivity and high oil absorption capacities of 77-163 times its own weight. The retention of absorption capacity was greater than 97% after 5000 cycles compression. These fascinating characteristics made the modified foam exceptional recyclability for commonly organic solvents and oils without obvious dissolution/swelling. Based on these inspiring results, the material can be employed for the continuous separation of various oil compounds floating on water surface with the assistance of a vacuum pump. Moreover, the prepared material was integrated with an apparatus to develop a prototype oil collector for the remediation of oil spills in a larger open-air environment. The devices could be readily used in a range of real-world applications, including industrial oil spill clean-up.

Simultaneous Realization of Flexibility and Ultrahigh Normalized Power Density in a Heatsink-Free Thermoelectric Generator via Fine Thermal Regulation.

Wearable thermoelectric generators (w-TEGs) can incessantly convert body heat into electricity to power electronics. However, the low efficiency of thermoelectric materials, tiny terminal temperature difference, rigidity, and negligence of lateral heat transfer preclude broad utilization of w-TEGs. In this work, we employ finite element simulation to find the key factors for simultaneous realization of flexibility and ultrahigh normalized power density. Using melamine foam with an ultralow thermal conductivity (0.03 W/m K) as the encapsulation material, a novel lightweight π-type w-TEG with no heatsink and excellent stretchability, comfortability, processability, and cost efficiency has been fabricated. At an ambient temperature of 24 °C, the maximum power density of the w-TEG reached 7 µW/cm2 (sitting) and 29 µW/cm2 (walking). Under suitable heat exchange conditions (heatsink with 1 m/s air velocity), 32 pairs of w-TEGs can generate 66 mV voltage and 60 µW/cm2 power density. The output performance of our TEG is remarkably superior to that of previously reported w-TEGs. Besides, the practicality of our w-TEG was showcased by successfully driving a quartz watch at room temperature.

Ni Flower/MXene-Melamine Foam Derived 3D Magnetic/Conductive Networks for Ultra-Efficient Microwave Absorption and Infrared Stealth.

The development of multifunctional and efficient electromagnetic wave absorbing materials is a challenging research hotspot. Here, the magnetized Ni flower/MXene hybrids are successfully assembled on the surface of melamine foam (MF) through electrostatic self-assembly and dip-coating adsorption process, realizing the integration of microwave absorption, infrared stealth, and flame retardant. Remarkably, the Ni/MXene-MF achieves a minimum reflection loss (RLmin) of - 62.7 dB with a corresponding effective absorption bandwidth (EAB) of 6.24 GHz at 2 mm and an EAB of 6.88 GHz at 1.8 mm. Strong electromagnetic wave absorption is attributed to the three-dimensional magnetic/conductive networks, which provided excellent impedance matching, dielectric loss, magnetic loss, interface polarization, and multiple attenuations. In addition, the Ni/MXene-MF endows low density, excellent heat insulation, infrared stealth, and flame-retardant functions. This work provided a new development strategy for the design of multifunctional and efficient electromagnetic wave absorbing materials.