A tumor microenvironment-activated metal-organic framework-based nanoplatform for amplified oxidative stress-induced enhanced chemotherapy.

Engineering a highly tumor microenvironment-responsive nanoplatform toward effective chemotherapy has always been a challenge in targeted cancer treatment. Metal-organic frameworks are a promising delivery system to reformulate previously approved drugs for enhanced chemotherapy, such as disulfiram (DSF). Herein, a tumor microenvironment-activated metal-organic framework-based nanoplatform DSF@MOF-199@FA has been fabricated to realize amplified oxidative stress-induced enhanced chemotherapy. Our results unveil that the copper ions and DSF released by DSF@MOF-199@FA in an acidic environment can be converted into toxic bis(N, N-diethyl dithiocarbamate) copper and then induce cell apoptosis. Simultaneously, we determined that the apoptosis outcome is further promoted by amplified oxidative stress through effective generation of reactive oxygen species and GSH elimination. In conclusion, this work provides a promising platform for effective anticancer treatment.

Mapping the correlations between bandgap, HOMO, and LUMO trends for meta substituted Zn-MOFs.

Bandgap is a key property that determines electrical and optical properties in materials. Modulating the bandgap thus is critical in developing novel materials particularly semiconductors with improved features. This study examines the bandgap, highest occupied molecular orbital (HOMO), and lowest unoccupied molecular orbital (LUMO) energy level trends in a metal organic framework, metal-organic framework 5 (MOF-5), as a function of Hammett substituent effect (with the constant σm in the meta-position of the benzene ring) and solvent dielectric effect (with the constant ε). Specifically, experimental design and response surface methodologies helped to assess the significance of trends and correlations between these molecular properties with σm and ε. While the HOMO and LUMO decrease with increasing σm, the LUMO exhibits greater sensitivity to the substituent's electron withdrawing capability. The relative difference in these trends helps to explain why the bandgap tends to decrease with increasing σm.

Advances in multifunctional metal-organic framework (MOF)-based nanoplatforms for cancer starvation therapy.

Cancer remains a significant threat to human health today. Even though starvation therapy and other treatment methods have recently advanced to a new level of rapid development in tumour treatment, their limited therapeutic effectiveness and unexpected side effects prevent them from becoming the first option in clinical treatment. With rapid advancement in nanotechnology, the utilization of nanomaterials in therapeutics offers the potential to address the shortcomings in cancer treatment. Notably, multifunctional metal-organic framework (MOF) has been widely employed in cancer therapy due to their customizable shape, adjustable diameter, high porosity, diverse compositions, large specific surface area, high degree of functionalization and strong biocompatibility. This paper reviews the current progress and success of MOF-based multifunctional nanoplatforms for cancer starvation therapy, as well as the prospects and potential barriers for the application of MOF nanoplatforms in cancer starvation therapy.

Hierarchical Porous Amidoximated Metal-Organic Framework for Highly Efficient Uranium Extraction.

With the rapid development of industry and technology, high-efficiency extraction of uranium from seawater is a research hotspot from the aspect of nuclear energy development. Herein, a new amidoximated metal-organic framework (UiO-66-DAMN-AO) constructed through a novel organic ligand of 2-diaminomaleonitrile-terephthalic acid (BDC-DAMN) is designed via one-step post-synthetic methods (PSM), which possess the merit of abundant multiaffinity sites, large specific surface area, and unique porous structure for efficient uranium extraction. Adopting one-step PSM can alleviate the destruction of structural stability and the reduction of the conversion rate of amidoxime groups. Meanwhile, introducing the BDC-DAMN ligand with abundant multiaffinity sites endow UiO-66-DAMN-AO with excellent adsorption ability (Qm = 426.3 mg g-1) and selectivity. Interestingly, the UiO-66-DAMN-AO has both micropores and mesopores, which may be attributed to the partial etching of UiO-66-DAMN-AO during the amidoximation. The presence of mesopores improves the mass transfer rate of UiO-66-DAMN-AO and provides more exposed active sites, favoring the adsorption of uranium on UiO-66-DAMN-AO. Thus, this study provides a feasible strategy for modifying metal-organic framework (MOFs) with plentiful amidoxime groups and the promising prospect for MOF-based materials to adsorb uranium from ocean.

A Highly Robust and Conducting Ultramicroporous 3D Fe(II)-Based Metal-Organic Framework for Efficient Energy Storage.

Exploitation of metal-organic framework (MOF) materials as active electrodes for energy storage or conversion is reasonably challenging owing to their poor robustness against various acidic/basic conditions and conventionally low electric conductivity. Keeping this in perspective, herein, a 3D ultramicroporous triazolate Fe-MOF (abbreviated as Fe-MET) is judiciously employed using cheap and commercially available starting materials. Fe-MET possesses ultra-stability against various chemical environments (pH-1 to pH-14 with varied organic solvents) and is highly electrically conductive (σ = 0.19 S m-1) in one fell swoop. By taking advantage of the properties mentioned above, Fe-MET electrodes give prominence to electrochemical capacitor (EC) performance by delivering an astounding gravimetric (304 F g-1) and areal (181 mF cm-2) capacitance at 0.5 A g-1 current density with exceptionally high cycling stability. Implementation of Fe-MET as an exclusive (by not using any conductive additives) EC electrode in solid-state energy storage devices outperforms most of the reported MOF-based EC materials and even surpasses certain porous carbon and graphene materials, showcasing superior capabilities and great promise compared to various other alternatives as energy storage materials.

Boosting Electrochemical CO2 Reduction on Copper-Based Metal-Organic Frameworks via Valence and Coordination Environment Modulation.

Cu-based metal-organic frameworks (MOFs) have attracted much attention for electrocatalytic CO2 reduction to high value-added chemicals, but they still suffer from low selectivity and instability. Here, an associative design strategy for the valence and coordination environment of the metal node in Cu-based MOFs is employed to regulate the CO2 electroreduction to ethylene. A novel "reduction-cleavage-recrystallization" method is developed to modulate the Cu(II)-Trimesic acid (BTC) framework to form a Cu(I)-BTC structure enriched with free carboxyl groups in the secondary coordination environment (SCE). In contrast to Cu(II)-BTC, the Cu(I)-BTC shows higher catalytic activity and better ethylene selectivity (≈2.2-fold) for CO2 electroreduction, which is further enhanced by increasing the content of free carboxyl groups, resulting in ethylene Faraday efficiency of up to 57% and the durability of the catalyst could last for 38 h without performance decline. It indicates that the synergistic effect between Cu(I)-O coordinated structure and free carboxyl groups considerably enhances the dimerization of *CO intermediates and hinders the hydrogenation of *CO intermediates in these competitive pathways. This work unravels the strong dependence of CO2 electroreduction on the Cu valence state and coordination environment in MOFs and provides a platform for designing highly selective electrocatalytic CO2 reduction catalysts.

Carboxyl-Decorated UiO-66 Supporting Pd Nanoparticles for Efficient Room-Temperature Hydrodeoxygenation of Lignin Derivatives.

Hydrodeoxygenation (HDO) of lignin derivatives at room-temperature (RT) is still of challenge due to the lack of satisfactory activity reported in previous literature. Here, it is successfully designed a Pd/UiO-66-(COOH)2 catalyst by using UiO-66-(COOH)2 as the support with uncoordinated carboxyl groups. This catalyst, featuring a moderate Pd loading, exhibited exceptional activity in RT HDO of vanillin (VAN, a typical model lignin derivative) to 2-methoxyl-4-methylpheonol (MMP), and >99% VAN conversion with >99% MMP yield is achieved, which is the first metal-organic framework (MOF)-based catalyst realizing the goal of RT HDO of lignin derivatives, surpassing previous reports in the literature. Detailed investigations reveal a linear relationship between the amount of uncoordinated carboxyl group and MMP yield. These uncoordinated carboxyl groups accelerate the conversion of intermediate such as vanillyl alcohol (VAL), ultimately leading to a higher yield of MMP over Pd/UiO-66-(COOH)2 catalyst. Furthermore, Pd/UiO-66-(COOH)2 catalyst also exhibits exceptional reusability and excellent substrate generality, highlighting its promising potential for further biomass utilization.

Metal-Organic Framework-Based Nanomaterials for Regulation of the Osteogenic Microenvironment.

As the global population ages, bone diseases have become increasingly prevalent in clinical settings. These conditions often involve detrimental factors such as infection, inflammation, and oxidative stress that disrupt bone homeostasis. Addressing these disorders requires exogenous strategies to regulate the osteogenic microenvironment (OME). The exogenous regulation of OME can be divided into four processes: induction, modulation, protection, and support, each serving a specific purpose. To this end, metal-organic frameworks (MOFs) are an emerging focus in nanomedicine, which show tremendous potential due to their superior delivery capability. MOFs play numerous roles in OME regulation such as metal ion donors, drug carriers, nanozymes, and photosensitizers, which have been extensively explored in recent studies. This review presents a comprehensive introduction to the exogenous regulation of OME by MOF-based nanomaterials. By discussing various functional MOF composites, this work aims to inspire and guide the creation of sophisticated and efficient nanomaterials for bone disease management.

Joint Exfoliation of MXene by Dimensional Mismatched SiC/ZIF-67 Toward Multifunctional Flame Retardant Thermoplastic Polyurethane.

The single-layer MXene fully demonstrates the advantages of 2D materials, especially catalytic, conductive, and mechanical properties. However, the high energy consumption and low efficiency faced by MXene in the divestiture process are still challenges that need to be solved urgently. In this article, dimension mismatch and collaborative stripping strategies are skillfully combined to easily realize the transformation from multi-layer MXene to single layer. In addition, the functionalized MXene@SiC@polyaniline (MXene@SiC@PANI) nano-hybrid materials are used as fillers to improve the thermal conductivity, flame retardant, and antibacterial properties of thermoplastic polyurethane (TPU). The surface temperature of TPU/MXene@SiC@PANI composites increased from 33.4 °C to 59.8 °C within 10 s. In addition, the antibacterial efficiency of TPU composites against Escherichia coli and Staphylococcus aureus is 69.6% and 88.9%, respectively. Compared with pure TPU, the peak heat release rate and total heat release are reduced by 71.4% and 34.6%, respectively. The flame-retardant mechanism of MXene hybrid materials is systematically discussed. It is worth noting that the introduction of PANI enhances the compatibility between the filler and the polymer, effectively maintaining the mechanical properties of the TPU itself. This work provides a convenient method for the multi-functional practical application of TPU.

Metal-Organic Framework (MOF)-Based Clean Energy Conversion: Recent Advances in Unlocking its Underlying Mechanisms.

Carbon neutrality is an important goal for humanity . As an eco-friendly technology, electrocatalytic clean energy conversion technology has emerged in the 21st century. Currently, metal-organic framework (MOF)-based electrocatalysis, including oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), hydrogen oxidation reaction (HOR), carbon dioxide reduction reaction (CO2RR), nitrogen reduction reaction (NRR), are the mainstream energy catalytic reactions, which are driven by electrocatalysis. In this paper, the current advanced characterizations for the analyses of MOF-based electrocatalytic energy reactions have been described in details, such as density function theory (DFT), machine learning, operando/in situ characterization, which provide in-depth analyses of the reaction mechanisms related to the above reactions reported in the past years. The practical applications that have been developed for some of the responses that are of application values, such as fuel cells, metal-air batteries, and water splitting have also been demonstrated. This paper aims to maximize the potential of MOF-based electrocatalysts in the field of energy catalysis, and to shed light on the development of current intense energy situations.

Nickel-Based Metal-Organic Frameworks Promote Diabetic Wound Healing via Scavenging Reactive Oxygen Species and Enhancing Angiogenesis.

Chronic diabetic wounds remain a worldwide challenge for both the clinic and research. Given the vicious circle of oxidative stress and inflammatory response as well as the impaired angiogenesis of the diabetic wound tissues, the wound healing process is disturbed and poorly responds to the current treatments. In this work, a nickel-based metal-organic framework (MOF, Ni-HHTP) with excellent antioxidant activity and proangiogenic function is developed to accelerate the healing process of chronic diabetic wounds. The Ni-HHTP can mimic the enzymatic catalytic activities of antioxidant enzymes to eliminate multi-types of reactive species through electron transfer reactions, which protects cells from oxidative stress-related damage. Moreover, this Ni-based MOF can promote cell migration and angiogenesis by activating transforming growth factor-ß1 (TGF-ß1) in vitro and reprogram macrophages to the anti-inflammatory phenotype. Importantly, Ni-HHTP effectively promotes the healing process of diabetic wounds by suppressing the inflammatory response and enhancing angiogenesis in vivo. This study reports a versatile and promising MOF-based nanozyme for diabetic wound healing, which may be extended in combination with other wound dressings to enhance the management of diabetic or non-healing wounds.

Hollow Superstructure In Situ Assembled by Single-Layer Janus Nanospheres toward Electromagnetic Shielding Flame-Retardant Polyurea Composites.

A dodecahedral superstructure consisting of a single layer of Janus spheres containing ZIF-67 nanodots is prepared by in situ polymerization, with ZIF-67 and bio-based phytic acid (PA) as templates and dopants. It is used to improve the flame retardant, electromagnetic (EMI) shielding, and thermal conductivity properties of polyurea (PUA). By adding 5 wt% polyaniline@cobalt phytate-2.0 (PANI@Co-PA-2.0), the peak of heat release rate and the peak of smoke production rate are reduced by 54.9 and 59.9%, respectively. The peak of CO and CO2 production also decreased by 46.2 and 53.1%, respectively. A decrease in the absorption intensity of aliphatic and aromatic volatiles is also observed. The fire safety of PUA is greatly improved. In addition, PUA/PANI@Co-PA-2.0 exhibits an EMI shielding capability of 22.4 dB with the help of reduced graphene oxide, which confirms the possibility of PUA material application in the field of electromagnetic shielding. The 5 wt% filler increases the tensile strength of the PUA matrix to 6.3 MPa, and the composite material obtains good thermal conductivity. This work provides a viable method for the preparation of a flame-retardant, conductive, and electromagnetic refractory PUA substrate.

Binder-Free MOF-Based and MOF-Derived Nanoarrays for Flexible Electrochemical Energy Storage: Progress and Perspectives.

The fast development of Internet of Things and the rapid advent of next-generation versatile wearable electronics require cost-effective and highly-efficient electroactive materials for flexible electrochemical energy storage devices. Among various electroactive materials, binder-free nanostructured arrays have attracted widespread attention. Featured with growing on a conductive and flexible substrate without using inactive and insulating binders, binder-free 3D nanoarray electrodes facilitate fast electron/ion transportation and rapid reaction kinetics with more exposed active sites, maintain structure integrity of electrodes even under bending or twisted conditions, readily release generated joule heat during charge/discharge cycles and achieve enhanced gravimetric capacity of the whole device. Binder-free metal-organic framework (MOF) nanoarrays and/or MOF-derived nanoarrays with high surface area and unique porous structure have emerged with great potential in energy storage field and been extensively exploited in recent years. In this review, common substrates used for binder-free nanoarrays are compared and discussed. Various MOF-based and MOF-derived nanoarrays, including metal oxides, sulfides, selenides, nitrides, phosphides and nitrogen-doped carbons, are surveyed and their electrochemical performance along with their applications in flexible energy storage are analyzed and overviewed. In addition, key technical issues and outlooks on future development of MOF-based and MOF-derived nanoarrays toward flexible energy storage are also offered.

Ligand Defect-Induced Active Sites in Ni-MOF-74 for Efficient Photocatalytic CO2 Reduction to CO.

The conversion of CO2 into valuable carbon-based products using clean and renewable solar energy has been a significant challenge in photocatalysis. It is of paramount importance to develop efficient photocatalysts for the catalytic conversion of CO2 using visible light. In this study, the Ni-MOF-74 material is successfully modified to achieve a highly porous structure (Ni-74-Am) through temperature and solvent modulation. Compared to the original Ni-MOF-74, Ni-74-Am contains more unsaturated Ni active sites resulting from defects, thereby enhancing the performance of CO2 photocatalytic conversion. Remarkably, Ni-74-Am exhibits outstanding photocatalytic performance, with a CO generation rate of 1380 µmol g-1 h-1 and 94% CO selectivity under visible light, significantly surpassing the majority of MOF-based photocatalysts reported to date. Furthermore, experimental characterizations reveal that Ni-74-Am has significantly higher efficiency of photogenerated electron-hole separation and faster carrier migration rate for photocatalytic CO2 reduction. This work enriches the design and application of defective MOFs and provides new insights into the design of MOF-based photocatalysts for renewable energy and environmental sustainability. The findings of this study hold significant promise for developing efficient photocatalysts for CO2 reduction under visible-light conditions.

Conducting Composite Polymer-Based Solid-State Electrolyte with High Ion Conductivity via Amorphous Condensed Structure and Multiple Li+ Transport Channels.

Traditional PEO electrolyte has high crystallinity which hinders the transmission of Li+, resulting in poor ion conductivity and complicated processing technology. Herein, a polymer electrolyte (p-electrolyte) with a wide electrochemical window and high ionic conductivity is designed, which possesses an amorphous condensed structure. The amorphous structure provides fast transport channels for Li+, so the p-electrolyte possesses an electrochemical window of 4.2 V, and high ionic conductivity of 1.58 × 10-5 S cm-1 at room temperature, which is 1-2 orders of magnitude higher than that of traditional PEO electrolyte. By using the designed polymer electrolyte as the foundation, an in situ curable composite polymer electrolyte (CPE-L) with multiple Li+ transport channels is elaborately constructed. The Cu-BTC MOF stores abundant Li+, which is introduced into the p-electrolyte. The rich unsaturated Cu2+ coordination sites of Cu-BTC can anchor TFSI- to release Li+, and the pore structure of Cu-BTC MOF cooperates with LLZTO nanoparticles to provide multiple fast transport channel for Li+, resulting in remarkable ionic conductivity (1.02 × 10-3 S cm-1) and Li+ transference number (0.58). The Li||CPE-L||Li symmetric battery cycles stably for more than 700 h at 0.1 mA cm-2, while the specific capacity of full battery is ≈153 mAh g-1 (RT, 0.2 C).

Controllable Design of Metal-Organic Framework-Derived Vanadium Oxynitride for High-Capacity and Long-Cycle Aqueous Zn-Ion Batteries.

Introducing N atoms in vanadium oxides (VOx) of aqueous Zn-ion batteries (ZIBs) can reduce their bandgap energy and enhance their electronic conductivity, thereby promoting the diffusion of Zn2+. The close-packed vanadium oxynitride (VON) generated often necessitates the intercalation of water molecules for restructuring, rendering it more conducive for zinc ion intercalation. However, its dense structure often causes structural strain and the formation of by-products during this process, resulting in decreased electrochemical performance. Herein, carbon-coated porous V2O3/VN nanosheets (p-VON@C) are constructed by annealing vanadium metal-organic framework in an ammonia-contained environment. The designed p-VON@C nanosheets are efficiently converted to low-crystalline hydrated N-doped VOx during subsequent activation while maintaining structural stability. This is because the V2O3/VN heterojunction and abundant oxygen vacancies in p-VON@C alleviate the structural strain during water molecule intercalation, and accelerate the intercalation rate. Carbon coating is beneficial to prevent p-VON@C from sliding or falling off during the activation and cycling process. Profiting from these advantages, the activated p-VON@C cathode delivers a high specific capacity of 518 mAh g-1 at 0.2 A g-1 and maintains a capacity retention rate of 80.9% after 2000 cycles at 10 A g-1. This work provides a pathway to designing high-quality aqueous ZIB cathodes.

Tadpole-Like Carbon Nanotube with Fe Nanoparticle Encapsulated at the Head and Zn Single-Atom Anchored on the Body: One-Pot Carbonization for Tetramodal Synergistic Cancer Therapy.

Precise integration of diverse therapeutic approaches into nanomaterials is the key to the development of multimodal synergistic cancer therapy. In this work, tadpole-like carbon nanotubes with Fe nanoparticle encapsulated at the head and Zn single-atom anchored on the body (Fe@CNT-Zn) is precisely designed and facilely prepared via one-pot carbonization. In vitro studies revealed the integration of chemotherapy (CT), chemodynamic therapy (CDT), photothermal therapy (PTT), and photodynamic therapy (PDT) in Fe@CNT-Zn as well as the near-infrared light (NIR)-responsive cascade therapeutic efficacy. Furthermore, in vivo studies demonstrated the NIR-triggered cascade-amplifying synergistic cancer therapy in a B16 tumor-bearing mouse model. The results not only showcased the Fe@CNT-Zn as a potential tetramodal therapeutic platform, but also demonstrated a proof-of-concept on metal-organic framework-based "one stone for multiple birds" strategy for in situ functionalization of carbon materials.

Multiple Electron Transfer in Semiconductive Ternary D-D'-A Metal-Organic Framework for Enhanced X-Ray Detection and Imaging.

Semiconductive metal-organic frameworks (MOFs) with donor-acceptor (D-A) characteristics have garnered attractive attention due to their capacity for separating and transferring photogenerated charges, making them promising candidates for high-performance X-ray detectors. However, the low charge transfer efficiency between the metal nodes and organic ligands limits the X-ray-to-electricity conversion efficiency of these materials. Herein, an additional photoactive donor (D') is introduced by incorporating a heavy atom-containing polyoxometalate (POM) [α-SiW12O40]4- into a binary {[Ni·bcbp·(H2O)2]·(H2O)4·Cl}n (Ni-bcbp, bcbp: H2bcbp·2Cl = 1,1'-bis(4-carboxyphenyl)(4,4'-bipyridinium) dichloride) MOF, resulting in a semiconductive ternary D-D'-A framework {[Ni2(bcbp)2·(H2O)4·(DMA)]·(SiW12O40)}n (SiW@Ni-bcbp, DMA: dimethylacetamide). The obtained material features an unprecedented porous 8-connected bcu-net structure that accommodates nanoscale [α-SiW12O40]4- counterions, displaying uncommon optoelectronic responses. In contrast to binary Ni-bcbp, the SiW@Ni-bcbp framework exhibits distinctive photochromism and robust X-ray responsiveness, which can be attributed to the synergistic effects of the electron reservoir and multiple photoinduced electron transfer originating from the POMs. As a result, the X-ray detector based on SiW@Ni-bcbp demonstrates a sensitivity of 5741.6 µC Gyair -1 cm-2 with a low detection limit of 0.49 µGyair s-1. Moreover, the devices demonstrated the capability of producing clearness X-ray images, providing a feasible and stable solution for constructing high-performance direct X-ray detectors.

Nano-Interfacial Supramolecular Adhesion of Metal-Organic Framework-Based Separator Enables High-Safety and Wide-Temperature-Range Lithium Batteries.

Polyolefin separators are the most commonly used separators for lithium batteries; however, they tend to shrink when heated, and their Li+ transference number (t Li +) is low. Metal-organic frameworks (MOFs) are expected to solve the above problems due to their high thermal stability, abundant pore structure, and open metal sites. However, it is difficult to prepare high-porosity MOF-based membranes by conventional membrane preparation methods. In this study, a high-porosity free-standing MOF-based safety separator, denoted the BCM separator, is prepared through a nano-interfacial supramolecular adhesion strategy. The BCM separator has a large specific surface area (450.22 m2 g-1) and porosity (62.0%), a high electrolyte uptake (475 wt%), and can maintain its morphology at 200 °C. The ionic conductivity and t Li + of the BCM separator are 1.97 and 0.72 mS cm-1, respectively. Li//LiFePO4 cells with BCM separators have a capacity retention rate of 95.07% after 1100 cycles at 5  C, a stable high-temperature cycling performance of 300 cycles at 80 °C, and good capacity retention at -40 °C. Li//NCM811 cells with BCM separators exhibit significantly improved rate performance and cycling performance. Pouch cells with BCM separators can work at 120 °C and have good safety at high temperature.

Dual-Drug Nanomedicine Assembly with Synergistic Anti-Aneurysmal Effects via Inflammation Suppression and Extracellular Matrix Stabilization.

Abdominal aortic aneurysm (AAA) represents a critical cardiovascular condition characterized by localized dilation of the abdominal aorta, carrying a significant risk of rupture and mortality. Current treatment options are limited, necessitating novel therapeutic approaches. This study investigates the potential of a pioneering nanodrug delivery system, RAP@PFB, in mitigating AAA progression. RAP@PFB integrates pentagalloyl glucose (PGG) and rapamycin (RAP) within a metal-organic-framework (MOF) structure through a facile assembly process, ensuring remarkable drug loading capacity and colloidal stability. The synergistic effects of PGG, a polyphenolic antioxidant, and RAP, an mTOR inhibitor, collectively regulate key players in AAA pathogenesis, such as macrophages and smooth muscle cells (SMCs). In macrophages, RAP@PFB efficiently scavenges various free radicals, suppresses inflammation, and promotes M1-to-M2 phenotype repolarization. In SMCs, it inhibits apoptosis and calcification, thereby stabilizing the extracellular matrix and reducing the risk of AAA rupture. Administered intravenously, RAP@PFB exhibits effective accumulation at the AAA site, demonstrating robust efficacy in reducing AAA progression through multiple mechanisms. Moreover, RAP@PFB demonstrates favorable biosafety profiles, supporting its potential translation into clinical applications for AAA therapy.