Adolescent Reference Values for MR-Derived Biventricular Strain Obtained Using Feature-Tracking and Myocardial Tagging.

BACKGROUND: Myocardial strain is a promising marker for the detection of early left or right ventricular (LV or RV) dysfunction in pediatric populations. The reference standard for MR strain measurement is myocardial tagging (MT); however, MT has limited clinical utility because the additional acquisitions needed are time-consuming. In contrast, MR-feature tracking (FT) allows strain quantification from routinely acquired cine sequences. Studies providing reference values obtained with both FT and MT for adolescents are lacking. PURPOSE: To use MR-FT and MT to define sex-specific LV and RV strain reference values for adolescents. STUDY TYPE: Cross-sectional, prospective. POPULATION: One hundred twenty-three adolescents aged 15-18 years (52% girls) without known cardiovascular disease. FIELD STRENGTH/SEQUENCE: Balanced steady-state free-precession sequence for FT analysis and a spatial modulation of magnetization hybrid TFE-EPI sequence for MT acquisitions at 3.0-T. ASSESSMENT: Segment Medviso software was used to obtain longitudinal (LS) and circumferential (CS) strain for both ventricles, and radial strain (RS) for LV. STATISTICAL TESTS: The Student t-test was used for between-sex comparisons of continuous variables. Sex-specific percentiles were calculated using the weighted average method. Intraobserver and interobserver agreement was assessed in 30 randomly selected studies using intraclass correlation coefficients (ICC). A P-value <0.05 was considered statistically significant. RESULTS: FT-derived LVLS and LVCS were significantly higher in girls than in boys (-19.8% vs. -17.8% and -22.2% vs. -21.0%, respectively), as they were with MT (LVLS: -18.1% vs. -16.8%; LVCS: -20.8% vs. -19.7%). FT-LVRS was higher in girls than in boys (44.8% vs. 35.1%), while MT-LVRS was the opposite (18.6% vs. 22.7%). FT-RVLS was higher in girls (-23.4% vs. -21.3%), but there were no between-sex differences in MT-derived RVLS or RVCS. ICC values for intraobserver agreement were ≥0.89, whereas for interobserver agreement were <0.80 for MT-LVRS and ≥0.80 for all remaining parameters. DATA CONCLUSION: This study provides sex-specific reference biventricular strain values obtained with MR-MT and MR-FT for adolescents aged 15-18 years. MR-FT may be a valid method for obtaining strain values in pediatric populations. EVIDENCE LEVEL: 1 TECHNICAL EFFICACY: Stage 3.

Strain analysis in CRT candidates using the novel segment length in cine (SLICE) post-processing technique on standard CMR cine images.

OBJECTIVES: Although myocardial strain analysis is a potential tool to improve patient selection for cardiac resynchronization therapy (CRT), there is currently no validated clinical approach to derive segmental strains. We evaluated the novel segment length in cine (SLICE) technique to derive segmental strains from standard cardiovascular MR (CMR) cine images in CRT candidates. METHODS: Twenty-seven patients with left bundle branch block underwent CMR examination including cine imaging and myocardial tagging (CMR-TAG). SLICE was performed by measuring segment length between anatomical landmarks throughout all phases on short-axis cines. This measure of frame-to-frame segment length change was compared to CMR-TAG circumferential strain measurements. Subsequently, conventional markers of CRT response were calculated. RESULTS: Segmental strains showed good to excellent agreement between SLICE and CMR-TAG (septum strain, intraclass correlation coefficient (ICC) 0.76; lateral wall strain, ICC 0.66). Conventional markers of CRT response also showed close agreement between both methods (ICC 0.61-0.78). Reproducibility of SLICE was excellent for intra-observer testing (all ICC ≥0.76) and good for interobserver testing (all ICC ≥0.61). CONCLUSIONS: The novel SLICE post-processing technique on standard CMR cine images offers both accurate and robust segmental strain measures compared to the 'gold standard' CMR-TAG technique, and has the advantage of being widely available. KEY POINTS: • Myocardial strain analysis could potentially improve patient selection for CRT. • Currently a well validated clinical approach to derive segmental strains is lacking. • The novel SLICE technique derives segmental strains from standard CMR cine images. • SLICE-derived strain markers of CRT response showed close agreement with CMR-TAG. • Future studies will focus on the prognostic value of SLICE in CRT candidates.

Accelerated two-dimensional cine DENSE cardiovascular magnetic resonance using compressed sensing and parallel imaging.

BACKGROUND: Cine Displacement Encoding with Stimulated Echoes (DENSE) provides accurate quantitative imaging of cardiac mechanics with rapid displacement and strain analysis; however, image acquisition times are relatively long. Compressed sensing (CS) with parallel imaging (PI) can generally provide high-quality images recovered from data sampled below the Nyquist rate. The purposes of the present study were to develop CS-PI-accelerated acquisition and reconstruction methods for cine DENSE, to assess their accuracy for cardiac imaging using retrospective undersampling, and to demonstrate their feasibility for prospectively-accelerated 2D cine DENSE imaging in a single breathhold. METHODS: An accelerated cine DENSE sequence with variable-density spiral k-space sampling and golden angle rotations through time was implemented. A CS method, Block LOw-rank Sparsity with Motion-guidance (BLOSM), was combined with sensitivity encoding (SENSE) for the reconstruction of under-sampled multi-coil spiral data. Seven healthy volunteers and 7 patients underwent 2D cine DENSE imaging with fully-sampled acquisitions (14-26 heartbeats in duration) and with prospectively rate-2 and rate-4 accelerated acquisitions (14 and 8 heartbeats in duration). Retrospectively- and prospectively-accelerated data were reconstructed using BLOSM-SENSE and SENSE. Image quality of retrospectively-undersampled data was quantified using the relative root mean square error (rRMSE). Myocardial displacement and circumferential strain were computed for functional assessment, and linear correlation and Bland-Altman analyses were used to compare accelerated acquisitions to fully-sampled reference datasets. RESULTS: For retrospectively-undersampled data, BLOSM-SENSE provided similar or lower rRMSE at rate-2 and lower rRMSE at rate-4 acceleration compared to SENSE (p < 0.05, ANOVA). Similarly, for retrospective undersampling, BLOSM-SENSE provided similar or better correlation with reference displacement and strain data at rate-2 and better correlation at rate-4 acceleration compared to SENSE. Bland-Altman analyses showed similar or better agreement for displacement and strain data at rate-2 and better agreement at rate-4 using BLOSM-SENSE compared to SENSE for retrospectively-undersampled data. Rate-2 and rate-4 prospectively-accelerated cine DENSE provided good image quality and expected values of displacement and strain. CONCLUSIONS: BLOSM-SENSE-accelerated spiral cine DENSE imaging with 2D displacement encoding can be acquired in a single breathhold of 8-14 heartbeats with high image quality and accurate assessment of myocardial displacement and circumferential strain.

Complementary radial tagging for improved myocardial tagging contrast.

PURPOSE: To develop and evaluate complementary radial tagging (CRT) for improved myocardial tagging contrast. METHODS: We sought to develop and evaluate CRT, which aims to preserve the radial tag contrast throughout the cardiac cycle. Similar to complementary spatial modulation of magnetization, CRT acquires two sets of images with a phase shift in the tag pattern. The combination of a ramped imaging flip angle and image subtraction enhances tag contrast throughout the cardiac cycle. The proposed CRT technique uses a small table shift away from the isocenter to improve the uniformity of the radial tag pattern. We provide a mathematical solution for the optimal table shift and validate the solution in using a retrospective analysis of images from 500 patients in the Cardiac Atlas Project database. RESULTS: CRT simulations, phantom experiments, and in vivo images all demonstrate the improved tag contrast of CRT compared to RT. The retrospective evaluation demonstrated that acceptable CRT images could be acquired in over 98% of the clinical exams. CONCLUSION: The CRT technique improves radial tag contrast throughout the cardiac cycle and should produce high quality tag patterns in nearly all patients.

Left Ventricular Remodeling Following Balloon Mitral Valvuloplasty in Rheumatic Mitral Stenosis: Magnetic Resonance Imaging Study.

Background: Rheumatic heart disease affects primarily cardiac valves, it could involve the myocardium either primarily or secondary to heart valve affection. The influence of balloon mitral valvuloplasty (BMV) on left ventricular function has not been sufficiently studied. Aim: To determine the influence of balloon mitral valvuloplasty (BMV) on both global and regional left ventricular (LV) function. Methods: Thirty patients with isolated rheumatic mitral stenosis (MS) were studied. All patients had cardiac magnetic resonance imaging (CMR) before, 6 months and 1 year after successful BMV. LV volumes, ejection fraction (EF), regional and global LV deformation, and LV late gadolinium enhancement were evaluated. Results: At baseline, patients had median EF of 57 (range: 45-69) %, LVEDVI of 74 (44-111) ml/m2 and LVESVI of 31 (14-57) ml/m2 with absence of late gadolinium enhancement in all myocardial segments. Six months following BMV, there was a significant increase in LV peak systolic global longitudinal strain (GLS) (-16.4 vs. -13.8, p < 0.001) and global circumferential strain (GCS) (-17.8 vs. -15.6, p = 0.002). At 1 year, there was a trend towards decrease in LVESVI (29 ml/m2, p = 0.079) with a significant increase in LV EF (62%, p < 0.001). A further significant increase, compared to 6 months follow up studies, was noticed in GLS (-17.9 vs. -16.4, p = 0.008) and GCS (-19.4 vs. -17.8 p = 0.03). Conclusions: Successful BMV is associated with improvement in global and regional LV systolic strain which continues for up to 1 year after the procedure.

Cardiac Magnetic Resonance as a Tool to Assess Dyssynchrony.

Cardiac resynchronization therapy (CRT) improves cardiac mechanics and quality of life in many patients with evidence of electromechanical cardiac dyssynchrony. However, up to 30% of patients receiving CRT do not respond to therapy. The mediator for poor response likely varies among patients; however, careful evaluation of mechanical dyssynchrony may inform management strategies. In this article, some of the methods and supporting evidence for dyssynchrony assessment with MRI as a predictor for CRT response are presented. The case is made for pre-implant assessment with MRI because of its ability to characterize scar, coronary venous distribution, and regional strain patterns.

Comparison of strain imaging techniques in CRT candidates: CMR tagging, CMR feature tracking and speckle tracking echocardiography.

Parameters using myocardial strain analysis may predict response to cardiac resynchronization therapy (CRT). As the agreement between currently available strain imaging modalities is unknown, three different modalities were compared. Twenty-seven CRT-candidates, prospectively included in the MARC study, underwent cardiac magnetic resonance (CMR) imaging and echocardiographic examination. Left ventricular (LV) circumferential strain was analysed with CMR tagging (CMR-TAG), CMR feature tracking (CMR-FT), and speckle tracking echocardiography (STE). Basic strain values and parameters of dyssynchrony and discoordination obtained with CMR-FT and STE were compared to CMR-TAG. Agreement of CMR-FT and CMR-TAG was overall fair, while agreement between STE and CMR-TAG was often poor. For both comparisons, agreement on discoordination parameters was highest, followed by dyssynchrony and basic strain parameters. For discoordination parameters, agreement on systolic stretch index was highest, with fair intra-class correlation coefficients (ICC) (CMR-FT: 0.58, STE: 0.55). ICC of septal systolic rebound stretch (SRSsept) was poor (CMR-FT: 0.41, STE: 0.30). Internal stretch factor of septal and lateral wall (ISFsep-lat) showed fair ICC values (CMR-FT: 0.53, STE: 0.46), while the ICC of the total LV (ISFLV) was fair for CMR-FT (0.55) and poor for STE (ICC: 0.32). The CURE index had a fair ICC for both comparisons (CMR-FT: 0.49, STE 0.41). Although comparison of STE to CMR-TAG was limited by methodological differences, agreement between CMR-FT and CMR-TAG was overall higher compared to STE and CMR-TAG. CMR-FT is a potential clinical alternative for CMR-TAG and STE, especially in the detection of discoordination in CRT-candidates.

Strain imaging to predict response to cardiac resynchronization therapy: a systematic comparison of strain parameters using multiple imaging techniques.

AIMS: Various strain parameters and multiple imaging techniques are presently available including cardiovascular magnetic resonance (CMR) tagging (CMR-TAG), CMR feature tracking (CMR-FT), and speckle tracking echocardiography (STE). This study aims to compare predictive performance of different strain parameters and evaluate results per imaging technique to predict cardiac resynchronization therapy (CRT) response. METHODS AND RESULTS: Twenty-seven patients were prospectively enrolled and underwent CMR and echocardiographic examination before CRT implantation. Strain analysis was performed in circumferential (CMR-TAG, CMR-FT, and STE-circ) and longitudinal (STE-long) orientations. Regional strain values, parameters of dyssynchrony, and discoordination were calculated. After 12 months, CRT response was measured by the echocardiographic change in left ventricular (LV) end-systolic volume (LVESV). Twenty-six patients completed follow-up; mean LVESV change was -29 ± 27% with 17 (65%) patients showing ≥15% LVESV reduction. Measures of dyssynchrony (SD-TTPLV ) and discoordination (ISFLV ) were strongly related to CRT response when using CMR-TAG (R2 0.61 and R2 0.57, respectively), but showed poor correlations for CMR-FT and STE (all R2  ≤ 0.32). In contrast, the end-systolic septal strain (ESSsep ) parameter showed a consistent high correlation with LVESV change for all techniques (CMR-TAG R2 0.60; CMR-FT R2 0.50; STE-circ R2 0.43; and STE-long R2 0.43). After adjustment for QRS duration and QRS morphology, ESSsep remained an independent predictor of response per technique. CONCLUSIONS: End-systolic septal strain was the only parameter with a consistent good relation to reverse remodelling after CRT, irrespective of assessment technique. In clinical practice, this measure can be obtained by any available strain imaging technique and provides predictive value on top of current guideline criteria.

Feature tracking cardiac magnetic resonance imaging: A review of a novel non-invasive cardiac imaging technique.

Cardiovascular disease is a leading cause of morbidity and mortality globally. Early diagnostic markers are gaining popularity for better patient care disease outcomes. There is an increasing interest in noninvasive cardiac imaging biomarkers to diagnose subclinical cardiac disease. Feature tracking cardiac magnetic resonance imaging is a novel post-processing technique that is increasingly being employed to assess global and regional myocardial function. This technique has numerous applications in structural and functional diagnostics. It has been validated in multiple studies, although there is still a long way to go for it to become routine standard of care.

Subclinical Myocardial Disease in Heart Failure Detected by CMR.

Noninvasive cardiac imaging plays a central role in the assessment of patients with heart failure at all stages of disease. Moreover, this role can be even more important for individuals with asymptomatic cardiac functional or structural abnormalities-subclinical myocardial disease - because they could have benefits from early interventions before the onset of clinical heart failure. In this sense, cardiac magnetic resonance offers not only precise global cardiac function and cardiac structure, but also more detailed regional function and tissue characterization by recent developing methods. In this section, some of the main methods available for subclinical myocardial disease detection are reviewed in terms of what they can provide and how they can improve heart failure assessment.