Spirobifluorene-Based Porous Organic Salts: Their Porous Network Diversification and Construction of Chiral Helical Luminescent Structures.

Porous organic salts (POSs) are organic porous materials assembled via charge-assisted hydrogen bonds between strong acids and bases such as sulfonic acids and amines. To diversify the network topology of POSs and extend its functions, this study focused on using 4,4',4'',4'''-(9,9'-spirobi[fluorene]-2,2',7,7'-tetrayl)tetrabenzenesulfonic acid (spiroBPS), which is a tetrasulfonic acid comprising a square planar skeleton. The POS consisting of spiroBPS and triphenylmethylamine (TPMA) (spiroBPS/TPMA) was constructed from the two-fold interpenetration of an orthogonal network with pts topology, which has not been reported in conventional POSs, owing to the shape of the spirobifluorene backbone. Furthermore, combining tris(4-chlorophenyl)methylamine (TPMA-Cl) and tris(4-bromophenyl)methylamine (TPMA-Br), which are bulkier than TPMA owing to the introduction of halogens at the p-position of the phenyl groups with spiroBPS allows us to construct novel POSs (spiroBPS/TPMA-Cl and spiroBPS/TPMA-Br). These POSs were constructed from a chiral helical network with pth topology, which was induced by the steric hindrance between the halogens and the curved fluorene skeleton. Moreover, spiroBPS/TPMA-Cl with pth topology exhibited circularly polarized luminescence (CPL) in the solid state, which has not been reported in hydrogen-bonded organic frameworks (HOFs).

Highly Fluorinated Nanospace in Porous Organic Salts with High Water Stability/Capability and Proton Conductivity.

Water in hydrophobic nanospaces shows specific dynamic properties different from bulk water. The investigation of these properties is important in various research fields, including materials science, chemistry, and biology. The elucidation of the correlation between properties of water and hydrophobic nanospaces requires nanospaces covered only with simple hydrophobic group (e.g., fluorine) without impurities such as metals. This work successfully fabricated all-organic diamondoid porous organic salts (d-POSs) with highly fluorinated nanospaces, wherein hydrophobic fluorine atoms are densely exposed on the void surfaces, by combining fluorine substituted triphenylmethylamine (TPMA) derivatives with tetrahedral tetrasulfonic acid. This d-POSs with a highly fluorinated nanospace significantly improved their water stability, retaining their crystal structure even when immersed in water over one week. Moreover, this highly hydrophobic and fluorinated nanospace adsorbs 160 mL(STP)/g of water vapor at Pe/P0=0.90; this is the first hydrophobic nanospace, which water molecules can enter, in an all-organic porous material. Furthermore, this highly fluorinated nanospace exhibits very high proton conductivity (1.34×10-2 S/cm) at 90 °C and 95 % RH. POSs with tailorable nanospaces may significantly advance the elucidation of the properties of specific "water" in pure hydrophobic environments.

Cage-Like Sodalite-Type Porous Organic Salts Enabling Luminescent Molecule's Incorporation and Room-temperature Phosphorescence Induction in Air.

Expression of room-temperature phosphorescence (RTP) in organic materials requires complicated molecular design and specific intermolecular interactions, and therefore types of RTP materials are restricted. This work presents cage-like sodalite-type porous organic salts (s-POSs) as host materials for luminescent molecules to induce RTP, using tetrasulfonic acid with an adamantane core and triphenylmethylamines that are modified with substituents in the para-positions of benzene rings (TPMA-X). By adding a representative luminescent molecule (pyrene) to a reaction solution during construction of s-POSs, the molecule is incorporated in a facile manner. s-POSs with a heavy halogen atom (X: Iodine) on the pore surface give heavy atom effects, suppression of thermal vibration, and protection from oxygen, for the incorporated molecule, which induce its RTP even in air. This strategy can be applied to various luminescent molecules, which may lead to the achievement of RTP of various colors.

Controlling the Crystallisation and Hydration State of Crystalline Porous Organic Salts.

Crystalline porous organic salts (CPOS) are a subclass of molecular crystals. The low solubility of CPOS and their building blocks limits the choice of crystallisation solvents to water or polar alcohols, hindering the isolation, scale-up, and scope of the porous material. In this work, high throughput screening was used to expand the solvent scope, resulting in the identification of a new porous salt, CPOS-7, formed from tetrakis(4-sulfophenyl)methane (TSPM) and tetrakis(4-aminophenyl)methane (TAPM). CPOS-7 does not form with standard solvents for CPOS, rather a hydrated phase (Hydrate2920) previously reported is isolated. Initial attempts to translate the crystallisation to batch led to challenges with loss of crystallinity and Hydrate2920 forming favorably in the presence of excess water. Using acetic acid as a dehydrating agent hindered formation of Hydrate2920 and furthermore allowed for direct conversion to CPOS-7. To allow for direct formation of CPOS-7 in high crystallinity flow chemistry was used for the first time to circumvent the issues found in batch. CPOS-7 and Hydrate2920 were shown to have promise for water and CO2 capture, with CPOS-7 having a CO2 uptake of 4.3 mmol/g at 195 K, making it one of the most porous CPOS reported to date.

Dry-Spinning of Artificial Spider Silk Ribbons From Regenerated Natural Spidroin in an Organic Medium.

Natural spider silks with striking performances achieve extensive investigations. Nonetheless, a lack of consensus over the mechanism of the natural spinning hinders the development of artificial spinning methods where the regenerated spider silks generally show poor performances compared with the natural fibers. As is known, the Plateau-Rayleigh instability tends to break solution column into droplets and is considered a main challenge during fiber-spinning. Here in this study, by harnessing the viscoelastic properties of the regenerated spidroin dope solution via organic salt-zinc acetate (ZA), this outcome can be avoided, and dry-spinning of long and mechanically robust regenerated spider silk ribbons can be successfully realized. The as-obtained dry-spun spider silk ribbons show an enhanced modulus up to 14 ± 4 GPa and a toughness of ≈51 ± 9 MJ m-3 after the post-stretching treatment, which is even better than that of the pristine spider silk fibers. This facile and flexible strategy enriches the spinning methodologies which bypass the bottleneck of precisely mimicking the complex natural environment of the glands in spiders, shining a light to the spider-silk-based textile industrial applications.

Improving the Antimycobacterial Drug Clofazimine through Formation of Organic Salts by Combination with Fluoroquinolones.

This work reports the synthesis, structural and thermal analysis, and in vitro evaluation of the antimicrobial activity of two new organic salts (OSs) derived from the antimycobacterial drug clofazimine and the fluoroquinolones ofloxacin or norfloxacin. Organic salts derived from active pharmaceutical ingredients (API-OSs), as those herein disclosed, hold promise as cost-effective formulations with improved features over their parent drugs, thus enabling the mitigation of some of their shortcomings. For instance, in the specific case of clofazimine, its poor solubility severely limits its bioavailability. As compared to clofazimine, the clofazimine-derived OSs now reported have improved solubility and thermostability, without any major deleterious effects on the drug's bioactivity profile.

Lanthanide-Based Organic Salts: Synthesis, Characterization, and Cytotoxicity Studies.

The formulation of magnetic ionic liquids (MILs) or organic salts based on lanthanides as anions has been explored. In this work, a set of choline-family-based salts, and two other, different cation families, were combined with Gadolinium(III) and Terbium(III) anions. Synthetic methodologies were previously optimized, and all organic salts were obtained as solids with melting temperatures higher than 100 °C. The magnetic moments obtained for the Gd(III) salts were, as expected, smaller than those obtained for the Tb(III)-based compounds. The values for Gd(III) and Tb(III) magnetic salts are in the range of 6.55-7.30 MB and 8.22-9.34 MB, respectively. It is important to note a correlation between the magnetic moments obtained for lanthanides, and the structural features of the cation. The cytotoxicity of lanthanide-based salts was also evaluated using 3T3, 293T, Caco2, and HepG2 cells, and it was revealed that most of the prepared compounds are not toxic.

Crystal Structures and Physicochemical Properties of 3-Chloro-4-hydroxyphenylacetic Acid Salts with Amines.

3-chloro-4-hydroxyphenylacetic acid (CHPAA) is a fungal metabolite. It is a small molecule that is useful in crystal engineering studies due to the functional groups present. Six amines were selected to form salts with CHPAA. Linear derivatives included diethylamine (DEA) and di-N-butylamine (DBM). The aromatic compounds chosen were 2-aminopyridine (A2MP), 2-amino-4-methylpyridine (A24MP), 2-amino-6-methylpyridine (A26MP) and 4-dimethylaminopyridine (DMAP). The salts were characterised using single-crystal X-ray diffraction, thermal analysis, FTIR spectroscopy and Hirshfeld surface analysis. For all the crystal structures, N-H···O and C-H···Cl contacts were present. O-H···O contacts were found in all the crystal structures except for (CHPAA2-)2DEA+, which was also the only structure that displayed a Cl···Cl contact. Furthermore, C-H···O contacts were found in all the crystal structures except for (CHPAA-)(DBM+). The thermal stability trend showed that the DBM salt was more stable than the DEA salt. For the aromatic co-formers, the thermal stability trend showed the following: CHPAA-(DMAP+) > (CHPAA-)(A2MP+)>2CHPAA-2A26MP+>(CHPAA-)(A24MP+).

Reply to the Correspondence on "Crystalline Porous Organic Salt for Ultrarapid Adsorption/Desorption-Based Atmospheric Water Harvesting by Dual Hydrogen Bond System".

White et al., in a recent Correspondence, provided additional structural data to illustrate that CPOS-6 undergoes a single-crystal-to-single-crystal transformation during water adsorption/desorption. This finding gave a better understanding of the relevant experimental phenomena from the perspective of structural transformation and is a good complement to our previous results. However, we wish to emphasize that our research focuses on the kinetic behavior of water during ultrafast adsorption/desorption in nano-confined channels. Herein, we further interpret the rapid transport of water molecules in the nano-confined channels from the perspective of superfluidity.

Porous Organic Salts: Diversifying Void Structures and Environments.

Porous organic salts (POSs) are porous organic materials, in which various aromatic sulfonic acids and amines are regularly self-assembled by charge-assisted hydrogen bonding. POSs exhibit high solubility in highly polar solvents. Therefore, they are prepared via facile recrystallization and exhibit high recyclability. In this study, tetrahedral-structured tetrasulfonic acid and triphenylmethylamine (TPMA) were combined to construct POSs with rigid diamond networks called diamondoid porous organic salts (d-POSs). Furthermore, by introducing substituents (e.g., F, Cl, Br, or I) at the para-positions of benzene rings of TPMA, these substituents were exposed on the void surface of d-POSs, and their diamond networks were distorted. This induced the formation of a variety of void structures and environments in the d-POSs, which significantly affected their gas adsorption behavior. In particular, the d-POS from TPMA substituted by fluorine exhibited very high CO2 adsorption of 182 mL(STP) g-1 at 1 atm in all-organic porous materials.

Crystalline Porous Organic Salt for Ultrarapid Adsorption/Desorption-Based Atmospheric Water Harvesting by Dual Hydrogen Bond System.

In recent years, the porous sorbent-assisted atmospheric water harvesting (AWH) method has emerged as an effective approach for solving water crises without geographical restrictions. However, there is a limited array of porous adsorbent materials that can be used for AWH, which are inadequate to meet the needs under different climatic conditions. In light of this, herein, we synthesize a new crystalline porous organic salt (CPOS; denoted as CPOS-6) possessing a dual hydrogen bond system and verify its applicability toward AWH for the first time. Unlike other reported CPOSs, CPOS-6 displays an S-shaped water sorption isotherm owing to the presence of the dual hydrogen bond system. Under simulated drought conditions in Xinjiang Uygur Autonomous Region, CPOS-6 exhibits long-term water adsorption-desorption cycling stability, low water desorption temperature, and ultrarapid adsorption-desorption kinetics. The results confirm that CPOS-6 is an effective sorbent material for AWH.

Effects of sodium butyrate and Lippia origanoides essential oil blend on growth, intestinal microbiota, histology, and haemato-immunological response of Nile tilapia.

This study aimed to verify the effects of dietary supplementation with sodium butyrate and Lippia origanoides, combined and isolated, on the health and zootechnical performance of Nile tilapia juveniles Oreochromis niloticus. A total of 120 fish (5.38 ± 0.65 g) were randomly distributed in 12 experimental units and fed different experimental diets for 30 days, namely: commercial diet without supplementation (Unsupplemented); commercial diet supplemented with 0.5% sodium butyrate (Butyrate); commercial diet supplemented with 0.125% L. origanoides (Lippia) and commercial diet supplemented with a mixture of 0.5% sodium butyrate and 0.125% L. origanoides (Butyrate + Lippia). After preparing the experimental diets there was an increase in the pH of diet Butyrate when compared to the other diets. After 30 days the fish supplemented with Butyrate + Lippia showed reduction significate in the mean corpuscular haemoglobin, concentration of total heterotrophic bacteria in the intestine, and lymphocyte infiltrates in the liver. Besides that, the supplementation with Butyrate + Lippia promoted an increased number of intestinal villi compared to the fish Unsupplemented ones. Additionally, fish fed a diet containing only Lippia presented an increase in the villus perimeter in the posterior region of the gut and in the red blood cell number. Animals supplemented only with sodium butyrate demonstrated increased lactic acid bacterium in the gut and macrosteatosis in the liver, besides decreased melanomacrophages in the spleen. The use of sodium butyrate associated with essential oil had positive effects on the intestinal microbiota, intestinal structure, liver, and spleen integrity, suggesting a greater efficiency of the compounds when used together in the nutrition of Nile tilapia juveniles.

Robust Supramolecular Nano-Tunnels Built from Molecular Bricks*.

Herein we report a linear ionic molecule that assembles into a supramolecular nano-tunnel structure through synergy of trident-type ionic interactions and π-π stacking interactions. The nano-tunnel crystal exhibits anisotropic guest adsorption behavior. The material shows good thermal stability and undergoes multi-stage single-crystal-to-single-crystal phase transformations to a nonporous structure on heating. The material exhibits a remarkable chemical stability under both acidic and basic conditions, which is rarely observed in supramolecular organic frameworks and is often related to structures with designed hydrogen-bonding interactions. Because of the high polarity of the tunnels, this molecular crystal also shows a large CO2 -adsorption capacity while excluding other gases at ambient temperature, leading to high CO2 /CH4 selectivity. Aggregation-induced emission of the molecules gives the bulk crystals vapochromic properties.

Combined X-ray Crystallographic, IR/Raman Spectroscopic, and Periodic DFT Investigations of New Multicomponent Crystalline Forms of Anthelmintic Drugs: A Case Study of Carbendazim Maleate.

Synthesis of multicomponent solid forms is an important method of modifying and fine-tuning the most critical physicochemical properties of drug compounds. The design of new multicomponent pharmaceutical materials requires reliable information about the supramolecular arrangement of molecules and detailed description of the intermolecular interactions in the crystal structure. It implies the use of a combination of different experimental and theoretical investigation methods. Organic salts present new challenges for those who develop theoretical approaches describing the structure, spectral properties, and lattice energy Elatt. These crystals consist of closed-shell organic ions interacting through relatively strong hydrogen bonds, which leads to Elatt > 200 kJ/mol. Some technical problems that a user of periodic (solid-state) density functional theory (DFT) programs encounters when calculating the properties of these crystals still remain unsolved, for example, the influence of cell parameter optimization on the Elatt value, wave numbers, relative intensity of Raman-active vibrations in the low-frequency region, etc. In this work, various properties of a new two-component carbendazim maleate crystal were experimentally investigated, and the applicability of different DFT functionals and empirical Grimme corrections to the description of the obtained structural and spectroscopic properties was tested. Based on this, practical recommendations were developed for further theoretical studies of multicomponent organic pharmaceutical crystals.

Effects of the different levels of dietary trace elements from organic or inorganic sources on growth performance, carcass traits, meat quality, and faecal mineral excretion of broilers.

This experiment was conducted to evaluate the effects of different sources and levels of trace elements on growth performance, carcass composition and mineral excretion levels of broilers. In a completely randomised experimental design, 900 one-day-old male Ross-308 broilers were assigned to 5 treatments, with 6 replicates of 30 birds each. The control group (CITE) was fed with a basal diet containing regular inclusion levels of inorganic trace elements. Treatment groups were supplied with reduced levels (30% and 50% of the regular level) of inorganic (ITE) or organic trace elements (OTE), respectively. Groups 50% ITE, 30% OTE and 50% OTE diets had equivalent average daily gain (ADG), average daily feed intake (ADFI), feed to gain ratio (F/G ratio) and mortality rate compared with group CITE in any phase. However, compared with group CITE chicks in group 30% ITE have lower ADG and ADFI and higher F/G ratio. The carcass yields were not affected by dietary treatments. Compared with group CITE, in groups 30% ITE, 50% ITE, 30% OTE and 50% OTE the shear force values of the breast muscle were only 71.8%, 83.4%, 63.5% and 59.4% (p < 0.05), respectively. Birds received diets containing reduced levels of trace elements had diminished excretions of Mn and Zn throughout the entire period (p < 0.01). In conclusion, the reduced supplementation of trace elements had no or slightly negative impact on growth performance, carcass yield and meat quality, but decreased faecal mineral excretion. Moreover, the trace element supply as OTE played a limited role on performance and excretion and was only partly beneficial for animal performance in case the trace element supply was reduced to 30%.

Endocytic Selective Toxicity of Rhodamine 6G nanoGUMBOS in Breast Cancer Cells.

Herein, we report on the role of endocytosis in the selective chemotherpeutic toxicity of rhodamine 6G (R6G) based nanomaterials, i.e., nanoGUMBOS, that are derived from a group of uniform materials based on organic salts (GUMBOS). Evaluation of cellular uptake in the presence and absence of endocytosis inhibitors suggests nanoGUMBOS internalization via clathrin-mediated endocytosis in cancer cells and reveals lack of endocytic internalization in normal cells. Results from characterization of these nanomaterials suggest that endocytic internalization in cancer cells leads to nanoGUMBOS dissociation within the endosomal environment. This ultimately results in selective cytotoxicity of the nanoGUMBOS for cancer cells with no toxicity toward normal cells under examined conditions. Following examination of the selectivity mechanism, in vivo investigations were performed to examine potential therapeutic properties of these nanoparticles. Remarkably, nanoGUMBOS treatment using a mouse xenograft model reduced the tumor volume by 50% suggesting retention of in vitro therapeutic properties in vivo. These results corroborate the selective behavior of nanoGUMBOS and demonstrate their in vivo therapeutic effects, providing further insight into the possible use of these nanomaterials as potential chemotherapeutic agents.

Synthesis of Crystalline Porous Organic Salts with High Proton Conductivity.

Self-assembled crystalline porous organic salts (CPOSs) formed by an acid-base combination and with one-dimensional polar channels containing water molecules have been synthesized. The water content in the channels of the porous salts plays an important role in the proton conduction performance of the materials. The porous salts described in this study feature high proton conductivity at ambient conditions and can reach as high as 2.2×10-2  S cm-1 at 333 K and under high humid conditions. This is among the best conductivity values reported to date for porous materials, for example, metal-organic frameworks and hydrogen-bonded organic frameworks. These materials exhibiting permanent porosity represent a group of porous materials and may find interesting applications in proton-exchange membrane fuel cells.

Heteroatom-Containing Porous Carbons Derived from Ionic Liquid-Doped Alkali Organic Salts for Supercapacitors.

A simple strategy for the synthesis of heteroatom-doped porous carbon materials (CMs) via using ionic liquid (IL)-doped alkali organic salts as small molecular precursors is developed. Doping of alkali organic salts (such as sodium glutamate, sodium tartrate, and sodium citrate) with heteroatoms containing ILs (including 1-butyl-3-methylimidazolium chlorine and 3-butyl-4-methythiazolebromination) not only incorporates the heteroatoms into the carbon frameworks but also highly improves the carbonization yield, as compared with that of either alkali organic salts or ILs as precursors. The porous structure of CMs can be tuned by adjusting the feed ratio of ILs. The porous CMs derived from 1-butyl-3-methylimidazolium chlorine-doped sodium glutamate exhibit high charge storage capacity with a specific capacitance of 287 F g(-1) and good stability over 5000 cycles in 6 m KOH at a current density of 1 A g(-1) for supercapacitors. This strategy opens a simple and efficient method for the synthesis of heteroatom-doped porous CMs.

Insights into the Formation and Structures of Molecular Gels by Diimidazolium Salt Gelators in Ionic Liquids or "Normal" Solvents.

Insights are provided into the properties of molecular gels formed by diimidazolium salts both in "normal" solvents and ionic liquids. These materials can be interesting for applications in green and sustainable chemistry in which ionic liquids play a significant role, like catalysis and energy. In particular, two positional isomers of a diimidazolium cation have been examined with a wide range of anions for their ability to form gel phases. In particular, di-, tri-, and tetravalent anions bearing aliphatic or aromatic spacers were paired with the divalent cations. The properties of the organo- and ionogels formed have been analyzed by means of several different techniques, including calorimetry, rheology, resonance light scattering, UV/Vis absorption, polarizing optical microscopy, and powder X-ray diffraction measurements. The investigations performed enabled us to obtain a wide range of conductive materials characterized by a high thermal stability and a low corrosiveness of the gelator (organogels) or of both gelator and solvent (ionogels). The information gained should be useful in the broader quest to identify and promote their applications.

SpONGE: spontaneous organization of numerous-layer generation by electrospray.

Advanced technologies that can mimic hierarchical architectures found in nature can provide pivotal clues for elucidating numerous biological mechanisms. Herein, a novel technology, spontaneous organization of numerous-layer generation by electrospray (SpONGE), was developed to create self-assembled and multilayered fibrous structures. The simple inclusion of salts in a polymer solution prior to electrospraying was key to mediating the structural versatilities of the fibrous structures. The SpONGE matrix demonstrated great potential as a crucial building block capable of inducing sequential, localized drug delivery or orchestrating cellular distribution in vivo, thereby expanding its scope of use to cover a variety of biomedical applications.