Water and heat stresses during grain formation affect the physicochemical properties of waxy maize starch.

BACKGROUND: Maize is frequently subjected to simultaneous water (drought or waterlogging) and heat (HS) stresses during grain formation in southern China. This work examined the effect of high temperature combined with drought (HD) or waterlogging (HW) during grain formation on the starch physicochemical properties of two waxy maize hybrids, namely Suyunnuo5 (SYN5) and Yunuo7 (YN7). RESULTS: Heat stress enlarged the starch granule size, and water stresses aggravated this effect. Heat stress reduced the ratio of small molecular weight fractions for both hybrids, and HD aggravated this reduction only in SYN5. Relative crystallinity in SYN5 was increased by stresses but in YN7 it was unaffected by HD, reduced by HS, and increased by HW. Fourier-transform infrared (FTIR) spectrometry results showed that the 1045/1022 cm-1 ratio in SYN5 was not influenced by HW but was increased by other stresses, and that in YN7 it was increased by all stresses, with the highest value induced by HW. Peak viscosity was decreased, whereas gelatinization temperatures and retrogradation percentage were increased by all of these stresses. These effects were exacerbated by combined heat and water stresses. The maximum decomposition rate was severely increased by HW. CONCLUSION: Drought or waterlogging at grain formation stage aggravated the detrimental effects of HS on the starch physicochemical properties of waxy maize. © 2020 Society of Chemical Industry.

Cereal type significantly affects the composition and reconstitution characteristics of dried fermented milk-cereal composites.

BACKGROUND: Dairy and cereal products are frequently combined to create composites with enhanced nutritional benefits. Commercially available dried dairy-cereal composites are typically reconstituted and cooked to produce porridge or soup. RESULTS: Dried fermented milk-cereal composites (FMCC) with ∼193 g kg-1 protein were prepared by blending fermented milk with parboiled oats (FMCCo), wheat (FMCCw), or barley (FMCCb), incubating the blend, drying, and milling. Cereal type significantly affected the composition of the FMCC and the properties of the reconstituted, cooked FMCC (R-FMCC). The FMCCo had a higher starch and fat content and lower levels of lactose, lactic acid, and amylose than FMCCb. The R-FMCCo had higher viscosity during cooking at 95 °C and cooling to 35 °C, and higher values of yield stress (σ0 ), consistency index (K) and viscosity on shearing from 20 to 120 s-1 at 60 °C than R-FMCCb. The FMCCw had lower levels of fat and ß-glucan than FMCCo or FMCCb, but was otherwise closer to FMMCb with respect to composition, cooking properties and flow behavior. CONCLUSION: Differences in composition and consistency associated with cereal type are likely to affect the nutritional value of the FMCC. © 2018 Society of Chemical Industry.

Textural and sensory properties of trifoliate yam (Dioscorea dumetorum) flour and stiff dough 'amala'.

The use of trifoliate yam (Dioscorea dumetorum) flour for stiff dough 'amala' production is one of the ways to curb under-utilization of the tuber. The study evaluates the textural and sensory properties of trifoliate yam flour and stiff dough. Freshly harvested trifoliate yam tubers were peeled, washed, sliced and blanched (60 (°)C for 10 min). The sliced yam were soaked in water for 12 h, dried and milled into flour. Pasting viscosities, functional properties, brown index and sensory attributes of the flour and stiff dough were analyzed. Peak, holding strength and final viscosities ranged from 84.09 to 213.33 RVU, 81.25 to 157.00 RVU and 127.58 to 236.17 RVU respectively. White raw flour had higher viscosity than the yellow flours. The swelling index, water absorption capacity and bulk density ranged from 1.46 to 2.28, 2.11 to 2.92 ml H2O/g and 0.71 to 0.88 g/cm(3) respectively. Blanching method employed improved the swelling index and water absorption capacity of flour. The brown index values of flour and stiff dough ranged from 6.73 to 18.36 and 14.63-46.72 respectively. Sensory evaluation revealed significant differences in the colour, odour and general acceptability of the product when compared with the stiff dough from white yam.

Correlation between in vitro starch digestibility and starch structure/physicochemical properties in rice.

Natural resistant starch (RS) in rice provides human health benefits, and its concentration in rice is influenced by the structure and physicochemical properties of starch. The native starch structures and physicochemical properties of three rice varieties, QR, BR58, and BR50, and their relationships to in vitro digestibility were studied. The starch granules in all three varieties were irregular or polyhedral in shape. There were a few oval granules and a few pinhole structures in QR, no oval granules but a higher number of pinholes in BR58, and no oval granules and pinholes in BR50. QR is a low-amylose (13.8 %), low-RS (0.2 %) variety. BR58 is a low-amylose (15.3 %), high-RS (6.5 %) variety. BR50 is a high-amylose (26.7 %), high-RS (8.3 %) variety. All three starches exhibited typical A-type diffraction patterns. Starch molecular weight, chain length distribution, starch branching degree, pasting capabilities, and thermal properties differed considerably between the rice starches. The RS contents of the rice starch varieties were positively correlated with AAC, Mw/Mn, Mz/Mn, peak 3, B, PTime, and Tp and negatively correlated with Mn, peak 2, DB, PV, and BD, according to Pearson's correlation analysis. These findings may be helpful for the breeding and development of high-RS rice varieties.

Effects of Waterlogging at Flowering Stage on the Grain Yield and Starch Quality of Waxy Maize.

Waterlogging is a common abiotic stress in global maize production. Maize flowering stage (from tasseling to silking) is more fragile to environmental stresses, and this stage frequently overlapped the plum rain season in the middle and lower reaches of Yangtze river in China and affect the yield and quality of spring-sown maize severely. In the present study, the soil moisture content under control and waterlogging conditions at the flowering stage was controlled by a negative-pressure water supply and controlling pot device in a pot trial in 2014-2015. The grain yield, starch content, and starch structural and functional properties under two soil moisture levels were compared using Suyunuo5 (SYN5) and Yunuo7 (YN7) as materials, which are the control hybrids of National waxy maize hybrid regional trials in Southern China. The results observed that the grain yield was reduced by 29.1% for SYN5 with waterlogging due to the decreased grain weight and numbers, which was significantly higher than that of YN7 (14.7%), indicated that YN7 was more tolerant to waterlogging. The grain starch content in YN7 was decreased by 9.4% when plants suffered waterlogging at the flowering stage, whereas the content in SYN5 was only decreased in 2014 and unaffected in 2015. The size of starch granules and proportion of small-molecule amylopectin with waterlogging at the flowering stage increased in SYN5 and decreased in YN7 in both years. The type of starch crystalline structure was not changed by waterlogging, whereas the relative crystallinity was reduced in SYN5 and increased in YN7. The pasting viscosities were decreased, and the pasting temperature was unaffected by waterlogging in general. The gelatinization enthalpy was unaffected by waterlogging in both hybrids in both years, whereas the retrogradation enthalpy and percentage in both hybrids were reduced by waterlogging in 2014 and unaffected in 2015. Between the two hybrids, YN7 has high pasting viscosities and low retrogradation percentage than SYN5, indicated its advantages on produce starch for more viscous and less retrograde food. In conclusion, waterlogging at the flowering stage reduced the grain yield, restricted starch accumulation, and deteriorated the pasting viscosity of waxy maize. Results provide information for utilization of waxy maize grain in food production.

The Effects of Genotype × Environment on Physicochemical and Sensory Properties and Differences of Volatile Organic Compounds of Three Rice Types (Oryza sativa L.).

Understanding the effects of genotype, environment and their interactions on rice quality is of great importance for rice breeding and cultivation. In this study, six rice varieties with two indica, two japonica and two indica-japonica types of rice were selected and planted at ten locations in Zhejiang Province to investigate the genotype (G) × environment (E) on physicochemical and sensory properties and the differences of volatile organic compounds (VOCs) among the three types of rice. Analysis of variances showed that apparent amylose content (AC), total protein content (PC), alkali spreading value (ASV), RVA profiles, and appearance (ACR), palatability (PCR), and sensory evaluation value (SEV) of cooked rice and texture of cooled cooked rice (TCCR) were mainly affected by genotypic variation, whereas the smell of cooked rice (SCR) was mainly affected by environment (p < 0.05). The G × E effect was significant for most parameters. The weather in the middle and late periods of filling had important effects on the formation of rice quality, especially on setback (SB) and pasting temperature (PT) (p < 0.01). They were negatively correlated with the texture of cooked rice (TCR) and SEV (p < 0.05). Peak viscosity (PV) and breakdown (BD) were positively related to the sensory evaluation parameters (p < 0.01) and could be used to predict cooked rice quality. A total of 59 VOCs were detected, and indica, japonica and indica-japonica had 9, 6 and 19 characteristic compounds, respectively. The principal component analysis showed that the physicochemical and sensory properties and VOCs of indica-japonica rice were more stable than those of indica and japonica rice at ten locations in Zhejiang Province. It is helpful for rice breeders to understand how the environment affects the physicochemical, sensory properties and VOCs of the three rice types, and it is also important for food enterprises to provide rice products with stable quality.

Starch Physicochemical Properties of Normal Maize under Different Fertilization Modes.

Improving the quality with desired functions of natural starch through agronomic practice will meet the increasing need of people for natural, functional foods. A one-off application of slow-release fertilizer is a simple and efficient practice in maize production, though its influence on the starch quality is scarce. In the present study, the structural and functional properties of the starch of normal maize under two fertilization modes (one-off application of slow-release fertilizer at the sowing time (SF), and three applications of conventional fertilizer at the sowing time, and topdressing at the jointing and flowering stages (CF)) under the same fertilization level (N/P2O5/K2O = 405/135/135 kg/ha) were studied using Jiangyu877 (JY877) and Suyu30 (SY30) as materials. The observed results indicate that the size of starch granules was enlarged by fertilization and the size was the largest under CF in both hybrids. The amylose content was unaffected by CF and reduced by SF in both hybrids. In comparison to no fertilizer (0F), the peak 1/peak 2 ratio was decreased by CF in both hybrids, whereas the ratio under SF was unaffected in JY877 and decreased in SY30. The amylopectin average chain-length was reduced by fertilization and the reduction was higher under CF in JY877. The relative crystallinity was increased by CF in both hybrids and the value under SF was unaffected in SY30 and increased in JY877. The peak, trough, and final viscosities of starch were increased by fertilization in both hybrids. The starch thermal characteristics in response to fertilization modes were dependent on hybrids. The retrogradation enthalpy and percentage were increased by CF in both hybrids, whereas those two parameters under SF were increased in SY30 and decreased in JY877. In conclusion, starch with similar granule size, higher peak 1/peak 2 ratio, and lower relative crystallinity was obtained under SF than under CF for both hybrids. Longer amylopectin chain-length was observed in JY877, which induced lower pasting viscosities in SY30 and lower retrogradation characteristics in JY877.

Effects of packaging and ripeness on plantain flour characteristics during storage.

The increasing implication of plantain flour in various food formulations calls for the need to evaluate the effects of ripening stage, packaging materials, and storage duration on its proximal composition and functional properties. For this study, plantain flours were produced from the cultivar Alloga at unripe and semiripe stage 3. They were stored both in transparent polyethylene bags and in an opaque aluminum foil. Physicochemical analyses and functional characterization of the plantain flour were performed on samples taken prior to storage and on monthly basis for 6 months during storage. Ash and carbohydrate contents decreased while the yellowness and redness increased with ripening. Pasting viscosity drastically decreased with ripening. During storage, significant differences in color and among most functional characteristics were observed as a consequence of both storage duration and packaging materials. Based on this research, flour from semiripe plantain could be recommended for use in formulations requiring low viscosity. Besides, it is suggested to store plantain flours in opaque containers to reduce the variability in its properties, thus maintaining its original quality.

Application of Exogenous Phytohormones at Silking Stage Improve Grain Quality under Post-Silking Drought Stress in Waxy Maize.

The application of exogenous plant growth regulator can improve plant resistance to drought stress. The effects of application of exogenous cytokinin (CTK), brassinolide (BR), or gibberellic acid (GA) at the silking time on the grain quality of two waxy maize hybrids under drought stress at grain formation stage were studied. Grain weight of both hybrids was unaffected by exogenous phytohormones under control conditions but increased under drought conditions with the application of BR. The grain starch content in response to drought varied with hybrid and phytohormone. Starch granule size and protein content in grains were increased by drought under all conditions, but various phytohormones exerted different forms of influence. The starch λmax in Yunuo7 was unaffected by single or interaction of phytohormones and water deficit, λmax in Jingkenuo2000 with BR was unaffected but with CTK or GA increased by drought. Relative crystallinity was reduced by drought without the application of phytohormone, but with phytohormones in response to drought it was different. Flour peak viscosity was reduced by drought. The value was increased with BR spraying under control and drought conditions. Retrogradation percentage under drought conditions was unaffected by exogenous phytohormones in Jingkenuo2000. In Yunuo7, retrogradation percentage was unaffected by BR but reduced by CTK and GA. In conclusion, spraying phytohormones at the silking stage can affect grain weight and starch quality, grains with a sticky taste can be improved by applying BR, and grains with low retrograde tendency can be produced by applying CTK.

Development of a dehydrated fortified food base from fermented milk and parboiled wheat, and comparison of its composition and reconstitution behavior with those of commercial dried dairy-cereal blends.

Dehydrated blends of milk and cereal are reconstituted and consumed as a nutritious soup or porridge in many regions; the composition and reconstitution behavior of the blends are likely to impact on nutritional quality and consumer acceptability of the soup/porridge. Experimental samples of dried fermented milk-bulgur wheat blend (FMBW) and commercial samples of dried dairy-cereal blends, namely kishk, tarhana, and super cereal plus corn-soy blend (SCpCSB) were compared for composition, color, water sorption, and reconstitution characteristics. FMBW blends had higher contents of protein, Ca, lactose and lactic acid, lower levels of salt (NaCl) and Fe, and a lighter, more-yellow color (higher L* and b*-color co-ordinates) than tarhana or kishk. Compared with SCpCSB, FMBW had numerically higher levels of protein, lactose, and lactic acid, lower levels of Ca, Fe, Zn, and Mg, and lower pH. Tarhana had highest mean levels of starch, and on reconstitution (133 g/kg) had highest water holding capacity, viscosity during pasting and cooling, yield stress (σ 0), consistency coefficient (K), and viscosity on shearing from 20 to 120 s-1 at 60°C. Reconstituted FMBW, kishk, and SCpCSB had similar pasting and flow behavior properties. Overall, the composition (starch, protein, Ca, Mg), pasting and flow behavior characteristics of FMBW were closer to those SCpCSB and kishk than to tarhana. The results suggest that the FMBW powder, on appropriate supplementation with Ca, Fe, Zn and Mg, could be used for the development of customized fortified blended foods for specific groups.

Physicochemical properties and digestibility of endosperm starches in four indica rice mutants.

Structural, physicochemical characteristics and digestibility of endosperm starches from four mutants (GM01, 03-05) and their parent Guangluai 4 (GLA4) were characterized. GM05 had a little higher apparent amylose content (AAC) and showed little difference in starch and digestion properties from GLA4. However, GM03 and GM04 with increased amount of chalkiness and partial translucent region in the endosperm displayed a distinct starch and digestion properties, which had the RS of 7.9 and 8.4%, respectively. GM03 and GM04 had higher AAC (33-35%), lower degree of crystallinity, lower gelatinization temperature and pasting viscosities, and more amount of B1 (DP 12-24) and B2 (DP 25-36) chains and less amount of B3 chains (DP ≥ 37) in amylopectin. AAC and the amount of B1 chains had positive correlation with RS, but the amount of B3 chains had negative correlation with RS. The results of this study may be applied to design RS by selecting rice germplasm with high AAC and high amount of B1 chains (DP 12-24) of amylopectin.

Effect of dual modification by annealing and ultrahigh pressure on properties of starches with different polymorphs.

The effects of dual modification by annealing (ANN) and ultrahigh pressure (UHP) on properties of wheat, yam, and potato starches were investigated. Compared with the single UHP treatment (400MPa), ANN-UHP (400MPa) treatment did not alter significantly the ordered structures of wheat starch, indicating that ANN treatment enhanced the stability and resistance of starch granules to the subsequent UHP treatment. In contrast, UHP (400MPa)-ANN treatment resulted in more severe disruption of ordered structures of wheat starch than did the single UHP treatment, showing that UHP-treated starch was more vulnerable to the subsequent ANN treatment. The dual modifications had little effect on granular structures of yam and potato starches. ANN-UHP (300 and 400MPa) and UHP (300MPa)-ANN treatments enhanced greatly the pasting viscosities of UHP-modified starches. Dual modifications altered greatly the pasting properties of yam and potato starches, as observed for the single ANN treatment. From this study, we proposed that ANN treatment enhanced stability of wheat starch by increasing interaction of starch chains in amorphous regions.

Multi-scale structures and functional properties of starches from Indica hybrid, Japonica and waxy rice.

The structural and functional properties of starches from three rice grains differing in amylose content (19.9, 13.4 and 0.8% for Japonica, Indica hybrid and waxy rice, respectively) were investigated using a range of characterization methods Indica hybrid starch (IHS) had the highest proportion of intermediate (DP 13-24) and long branch chains (DP≥37) and the lowest proportion of short branch chains (DP 6-12), whereas the opposite results were observed for Japonica starch (JS). The results for waxy rice starch (WS) were between those of IHS and JS. Rice starches showed a typical A-type X-ray diffraction pattern with the relative crystallinity ranging from 33.4% for JS to 39.4% for WS. Significant differences were observed in lamellar distance and short-range molecular order characterized by IR ratio of absorbances at 1047/1022cm-1 and full width of half maximum (FWHM) of the band at 480cm-1. WS showed a higher swelling power and a lower close packing concentration at temperatures from 60 to 90°C. The lower peak viscosity of WS was attributed to the formation of less rigid swollen granules at a concentrated regime. WS showed a higher in vitro digestibility compared with IHS and JS.

Effects of stearic acid and gamma irradiation, alone and in combination, on pasting properties of high amylose maize starch.

The effects of stearic acid and gamma irradiation on pasting properties of high amylose maize starch (HAMS) were studied. Stearic acid (0%, 1.5%, and 5%) was added to HAMS, and then irradiated at 0, 30, and 60 kGy before pasting. Stearic acid increased the paste viscosity of un-irradiated HAMS from 420 mPas to 557 and 652 mPas for 1.5% and 5% stearic acid, respectively. This observation related well with the formation of type II amylose-lipid complexes, with melting temperatures of about 100-120 °C. Gamma irradiation (30 and 6 0kGy) reduced pasting viscosity of HAMS. Pasting of gamma irradiated HAMS resulted in the formation of type I amylose-lipid complexes, with melting temperatures and enthalpies ranging from 82 to 102 °C and 0.22 to 1.85 J/g, respectively. Stearic acid addition followed by irradiation creates means of producing different types of amylose-lipid complexes from HAMS for industrial utilization.

The contribution of lysophospholipids to pasting and thermal properties of nonwaxy rice starch.

It is known that lysophospholipids (LPLs) may affect rice starch pasting and thermal properties possibly through the formation of an amylose-lipid complex. However, whether these effects of rice LPLs are independent of amylose are still not understood. Here, the diversity of rice flour pasting and thermal properties and their relationship with individual LPL components in native rice endosperm were studied. Several significant correlations between LPLs and pasting properties, such as cool paste viscosity (CPV), breakdown (BD) and consistency (CS) were clearly evident. Thermal properties generally had no relationship with LPLs except for gelatinization enthalpy. Using partial correlation analysis we found that, irrespective of apparent amylose content, CPV and individual LPLs were positively correlated, while BD, CS and other individual LPLs were negatively correlated. This study suggests naturally occurring individual LPLs can contribute to rice flour pasting and thermal properties, either independently or in combination with amylose.

Genetic diversity of amylose content and RVA pasting parameters in 20 rice accessions grown in Hainan, China.

Starch physicochemical properties determine the eating and cooking quality of rice. The genetic diversity in the apparent amylose content (AAC) and pasting viscosity parameters of 20 geographically diverse rice accessions were investigated. It was found that AAC and pasting viscosities differed widely among different accessions, but each accession performed relatively stably across two environments. Analysis of variance (ANOVA) indicated that all traits were predominantly controlled by genotypic variance, but the genotype×environment interaction effects were also significant except for AAC and PT. Significant correlations were found for each parameter between 2years (P<0.001). Association mapping identified a total of 22 main-effect quantitative trait loci (QTLs) responsible for all traits except for CPV. This study showed that starch physicochemical properties of rice were highly stable and mainly controlled by genetic factors, and gave insight into the molecular improvement of eating quality using marker assisted breeding with the identified QTLs/genes.

Pasting viscosity and in vitro digestibility of retrograded waxy and normal corn starch powders.

Pasting viscosity and in vitro digestibility of oven-dried powders of waxy and normal corn starch gels (40% solids) retrograded under an isothermal (4°C) or temperature cycled (4/30°C) storage were investigated. Temperature cycling induced higher onset temperature for melting of amylopectin crystals than isothermal storage under a differential scanning calorimeter whereas little difference in crystalline type was observed under X-ray diffraction analysis. Temperature cycling caused higher pasting temperature and viscosity for the retrograded starches than isothermal storage. The retrograded waxy corn starch powders exhibited pasting behaviors similar to that of native waxy corn starch. However, the retrograded normal corn starch powders showed very much different pasting patterns with lower pasting viscosity but higher pasting temperature than native starch counterpart. The retrogradation increased slowly digestible starch content without changing resistant starch content, more effectively by the temperature cycling than the isothermal storage.