Enhancement of Photoluminescence Properties via Polymer Infiltration in a Colloidal Photonic Glass.

Photonic glasses (PGs) based on the self-assembly of monosized nanoparticles can be an effective tool for realizing disordered structures capable of tailoring light diffusion due to the establishment of Mie resonances. In particular, the wavelength position of these resonances depends mainly on the morphology (dimension) and optical properties (refractive index) of the building blocks. In this study, we report the fabrication and optical characterization of photonic glasses obtained via a self-assembling technique. Furthermore, we have demonstrated that the infiltration of these systems with a green-emitting polymer enhances the properties of the polymer, resulting in a large increase in its photoluminescence quantum yield and a 3 ps growing time of the photoluminescence time decay Finally, the development of the aforementioned system can serve as a suitable low-cost platform for the realization of lasers and fluorescence-based bio-sensors.

Rapid Color-Switching of MnO2 Hollow-Nanosphere Films in Dynamic Water Vapor for Reversible Optical Encryption.

Drop-casting manganese oxide (MnO2 ) hollow nanospheres synthesized via a simple surface-initiated redox route produces thin films exhibiting angle-independent structural colors. The colors can rapidly change in response to high-humidity dynamic water vapor (relative humidity > 90%) with excellent reversibility. When the film is triggered by dynamic water vapor with a relative humidity of ≈100%, the color changes with an optimal wavelength redshift of ≈60 nm at ≈600 ms while there is no shift under static water vapor. The unique selective response originates from the nanoscale porosity formed in the shells by randomly stacked MnO2 nanosheets, which enhances the capillary condensation of dynamic water vapor and promotes the change of their effective refractive index for rapid color switching. The repeated color-switching tests over 100 times confirm the durability and reversibility of the MnO2 film. The potential of these films for applications in anti-counterfeiting and information encryption is further demonstrated by reversible encoding and decoding initiated exclusively by exposure to human breath.

Deconvoluting the Optical Response of Biocompatible Photonic Pigments.

To unlock the widespread use of block copolymers as photonic pigments, there is an urgent need to consider their environmental impact (cf. microplastic pollution). Here we show how an inverse photonic glass architecture can enable the use of biocompatible bottlebrush block copolymers (BBCPs), which otherwise lack the refractive index contrast needed for a strong photonic response. A library of photonic pigments is produced from poly(norbornene-graft-polycaprolactone)-block-poly(norbornene-graft-polyethylene glycol), with the color tuned via either the BBCP molecular weight or the processing temperature upon microparticle fabrication. The structure-optic relationship between the 3D porous morphology of the microparticles and their complex optical response is revealed by both an analytical scattering model and 3D finite-difference time domain (FDTD) simulations. Combined, this allows for strategies to enhance the color purity to be proposed and realized with our biocompatible BBCP system.

Structural Color Materials for Optical Anticounterfeiting.

The counterfeiting of goods is growing worldwide, affecting practically any marketable item ranging from consumer goods to human health. Anticounterfeiting is essential for authentication, currency, and security. Anticounterfeiting tags based on structural color materials have enjoyed worldwide and long-term commercial success due to their inexpensive production and exceptional ease of percept. However, conventional anticounterfeiting tags of holographic gratings can be readily copied or imitated. Much progress has been made recently to overcome this limitation by employing sufficient complexity and stimuli-responsive ability into the structural color materials. Moreover, traditional processing methods of structural color tags are mainly based on photolithography and nanoimprinting, while new processing methods such as the inkless printing and additive manufacturing have been developed, enabling massive scale up fabrication of novel structural color security engineering. This review presents recent breakthroughs in structural color materials, and their applications in optical encryption and anticounterfeiting are discussed in detail. Special attention is given to the unique structures for optical anticounterfeiting techniques and their optical aspects for encryption. Finally, emerging research directions and current challenges in optical encryption technologies using structural color materials is presented.

Free-Standing Photonic Glasses Fabricated in a Centrifugal Field.

One efficient method to obtain disordered colloidal packing is to reduce the stability of colloidal particles by adding electrolytes to the colloidal dispersions. But the correct amount of additional electrolytes must be found empirically. Here, the effect of CaCl2 on polystyrene colloidal dispersions is studied, and a link between the amount of CaCl2 and the corresponding glassy colloidal structure is quantitatively built. A threshold concentration of CaCl2 is found by dynamic light scattering. When exceeding this threshold, different nanoparticle oligomers are observed in the dispersions by analytical ultracentrifugation. The second objective is to achieve free-standing samples, which is required for many optical measurements. A universal method is established, using a centrifugal field to produce robust samples by polymerizing coassembled hydrophilic monomers to form a network, which traps the glassy colloidal structures. Photon time of flight measurements shows that the CaCl2 concentration threshold should not be exceeded. Otherwise an optical shortcut may take place. Thus, the work provides a feasible universal route to prepare macroscopic free-standing photonic glasses from electrostatically stabilized nanoparticles, suitable for further optical investigation.

Spontaneous Photonic Jammed Packing of Core-Shell Colloids in Conductive Aqueous Inks for Non-Iridescent Structural Coloration.

Integrating structural colors and conductivity into aqueous inks has the potential to revolutionize wearable electronics, providing flexibility, sustainability, and artistic appeal to electronic components. This study aims to introduce bioinspired color engineering to conductive aqueous inks. Our self-assembly approach involves mixing poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) with sulfonic acid-modified polystyrene (sPS) colloids to generate non-iridescent structural colors in the inks. This spontaneous structural coloration occurs because PEDOT:PSS and sPS colloids can self-assemble into core-shell structures and reversibly cluster into photonic aggregates of maximally random jammed packing within the aqueous environment, as demonstrated by small-angle X-ray scattering. Dissipative particle dynamics simulation confirms that the self-assembly aggregation of PEDOT:PSS chains and sPS colloids can be manipulated by the polymer-colloid interactions. Utilizing the finite-difference time-domain method, we demonstrate that the photonic aggregates of the core-shell colloids achieve close to maximum jammed packing, making them suitable for producing vivid structural colors. These versatile conductive inks offer adjustable color saturation and conductivity, with conductivity levels reaching 36 S cm-1 through the addition of polyethylene glycol oligomer, while enhanced water resistance and mechanical stability are achieved by doping with a cross-linker, poly(ethylene glycol) diglycidyl ether. With these unique features, the inks can create flexible, patterned circuits through processes like coating, writing, and dyeing on large areas, providing eco-friendly, visually appealing colors for customizable, stylish, comfortable, and wearable electronic devices.

Tuning the Color of Photonic Glass Pigments by Thermal Annealing.

Thermal or solvent annealing is commonly employed to enhance phase separation and remove defects in block copolymer (BCP) films, leading to well-resolved nanostructures. Annealing is of particular importance for photonic BCP materials, where large, well-ordered lamellar domains are required to generate strong reflections at visible wavelengths. However, such strategies have not been considered for porous BCP systems, such as inverse photonic glasses, where the structure (and thus the optical response) is no longer defined solely by the chemical compatibility of the blocks, but by the size and arrangement of voids within the BCP matrix. In this study, a demonstration of how the concept of "thermal annealing" can be applied to bottlebrush block copolymer (BBCP) microparticles with a photonic glass architecture is presented, enabling their coloration to be tuned from blue to red. By comparing biocompatible BBCPs with similar composition, but different thermal behavior, it is shown that this process is driven by both a temperature-induced softening of the BBCP matrix (i.e., polymer mobility) and the absence of microphase separation (enabling diffusion-induced swelling of the pores). Last, this concept is applied toward the production of a thermochromic patterned hydrogel, exemplifying the potential of such responsive biocompatible photonic-glass pigments toward smart labeling or anticounterfeiting applications.

Deconvoluting the Optical Response of Biocompatible Photonic Pigments.

To unlock the widespread use of block copolymers as photonic pigments, there is an urgent need to consider their environmental impact (cf. microplastic pollution). Here we show how an inverse photonic glass architecture can enable the use of biocompatible bottlebrush block copolymers (BBCPs), which otherwise lack the refractive index contrast needed for a strong photonic response. A library of photonic pigments is produced from poly(norbornene-graft-polycaprolactone)-block-poly(norbornene-graft-polyethylene glycol), with the color tuned via either the BBCP molecular weight or the processing temperature upon microparticle fabrication. The structure-optic relationship between the 3D porous morphology of the microparticles and their complex optical response is revealed by both an analytical scattering model and 3D finite-difference time domain (FDTD) simulations. Combined, this allows for strategies to enhance the color purity to be proposed and realized with our biocompatible BBCP system.

Tailoring Disorder and Quality of Photonic Glass Templates for Structural Coloration by Particle Charge Interactions.

To obtain high-quality homogeneous photonic glass-based structural color films over large areas, it is essential to precisely control the degree of disorder of the spherical particles used and reduce the crack density within the films as much as possible. To tailor the disorder and quality of photonic glasses, a heteroaggregation-based process was developed by employing two oppositely charged equal-sized polystyrene (PS) particle types. The influence of the particle size ratio on the extent of heteroaggregation in the suspension mixes is investigated and correlated with both the morphology and the resultant optical properties of the films. The results show that the oppositely charged particle size ratio within the mix greatly influences the assembled structure in the films, affecting their roughness, crack density, and the coffee-ring formation. To better differentiate the morphology of the films, scanning electron microscopy images of the microstructures were classified by a supervised training of a deep convolutional neural network model to find distinctions that are inaccessible by conventional image analysis methods. Selected compositions were then infiltrated with TiO2 via atomic layer deposition, and after removal of the PS spheres, surface-templated inverse photonic glasses were obtained. Different color impressions and optical properties were obtained depending on the heteroaggregation level and thus the quality of the resultant films. The best results regarding the stability of the films and suppression of coffee-ring formation are obtained with a 35 wt % positively charged over negatively charged particle mix, which yielded enhanced structural coloration associated with improved film quality, tailored by the heteroaggregation fabrication process.

Reflectance Confocal Microscopy: A Powerful Tool for Large Scale Characterization of Ordered/Disordered Morphology in Colloidal Photonic Structures.

The development of appropriate methods to correlate the structure and optical properties of colloidal photonic structures is still a challenge. Structural information is mostly obtained by electron, X-ray, or optical microscopy methods and X-ray diffraction, while bulk spectroscopic methods and low resolution bright-field microscopy are used for optical characterization. Here, we describe the use of reflectance confocal microscopy as a simple and intuitive technique to provide a direct correlation between the ordered/disordered structural morphology of colloidal crystals and glasses, and their corresponding optical properties.

Angular-Independent Photonic Pigments via the Controlled Micellization of Amphiphilic Bottlebrush Block Copolymers.

Photonic materials with angular-independent structural color are highly desirable because they offer the broad viewing angles required for application as colorants in paints, cosmetics, textiles, or displays. However, they are challenging to fabricate as they require isotropic nanoscale architectures with only short-range correlation. Here, porous microparticles with such a structure are produced in a single, scalable step from an amphiphilic bottlebrush block copolymer. This is achieved by exploiting a novel "controlled micellization" self-assembly mechanism within an emulsified toluene-in-water droplet. By restricting water permeation through the droplet interface, the size of the pores can be precisely addressed, resulting in structurally colored pigments. Furthermore, the reflected color can be tuned to reflect across the full visible spectrum using only a single polymer (Mn  = 290 kDa) by altering the initial emulsification conditions. Such "photonic pigments" have several key advantages over their crystalline analogues, as they provide isotropic structural coloration that suppresses iridescence and improves color purity without the need for either refractive index matching or the inclusion of a broadband absorber.