Predictions of photophysical properties of phosphorescent platinum(II) complexes based on ensemble machine learning approach.

Cyclometalated Pt(II) complexes are popular phosphorescent emitters with color-tunable emissions. To render their practical applications as organic light-emitting diodes emitters, it is required to develop Pt(II) complexes with high radiative decay rate constant and photoluminescence (PL) quantum yield. Here, a general protocol is developed for accurate predictions of emission wavelength, radiative decay rate constant, and PL quantum yield based on the combination of first-principles quantum mechanical method, machine learning, and experimental calibration. A new dataset concerning phosphorescent Pt(II) emitters is constructed, with more than 200 samples collected from the literature. Features containing pertinent electronic properties of the complexes are chosen and ensemble learning models combined with stacking-based approaches exhibit the best performance, where the values of squared correlation coefficients are 0.96, 0.81, and 0.67 for the predictions of emission wavelength, PL quantum yield and radiative decay rate constant, respectively. The accuracy of the protocol is further confirmed using 24 recently reported Pt(II) complexes, which demonstrates its reliability for a broad palette of Pt(II) emitters.

Mechanical Tuning of Fluorescence Lifetime and Bandgap in an Elastically Flexible Molecular Semiconductor Crystal.

Despite having superior transport properties, lack of mechanical flexibility is a major drawback of crystalline molecular semiconductors as compared to their polymer analogues. Here single crystals of an organic semiconductor are reported that are not only flexible but exhibit systematic tuning of bandgaps, fluorescence lifetime, and emission wavelengths upon elastically bending. Spatially resolved fluorescence lifetime imaging and confocal fluorescence microscopy reveals systematic trends in the lifetime decay across the bent crystal region along with shifts in the emission wavelength. From the outer arc to the inner arc of the bent crystal, a significant decrease in the lifetime of ≈1.9 ns is observed, with a gradual bathochromic shift of ≈10 nm in the emission wavelength. For the crystal having a bandgap of 2.73 eV, the directional stress arising from bending leads to molecular reorientation effects and variations in the extent of intermolecular interactions- which are correlated to the lowering of bandgap and the evolution of the projected density of states. The systematic changes in the interactions quantified using electron density topological analysis in the compressed inner arc and elongated outer arc region are correlated to the non-radiative decay processes, thus rationalizing the tuning of fluorescence lifetime.

Exploiting the Photo-Physical Properties of Metal Halide Perovskite Nanocrystals for Bioimaging.

Perovskite nanomaterials have recently been exploited for bioimaging applications due to their unique photo-physical properties, including high absorbance, good photostability, narrow emissions, and nonlinear optical properties. These attributes outperform conventional fluorescent materials such as organic dyes and metal chalcogenide quantum dots and endow them with the potential to reshape a wide array of bioimaging modalities. Yet, their full potential necessitates a deep grasp of their structure-attribute relationship and strategies for enhancing water stability through surface engineering for meeting the stringent and unique requirements of each individual imaging modality. This review delves into this evolving frontier, highlighting how their distinctive photo-physical properties can be leveraged and optimized for various bioimaging modalities, including visible light imaging, near-infrared imaging, and super-resolution imaging.

Urea-Promoted Neat Synthesis of Fused Dihydroisoquinolines and Disubstituted Pyridines: A Mechanistic Observation with Molecular-Sensing Studies.

An efficient and short synthesis of fused dihydroisoquinolines, diaryl substituted pyridine derivatives in good to high yields has been established by using an environmentally safe, solvent-metal-oxidant-free tandem approach. In this article, we discuss how the electrocyclic reaction is more pronounced in the solid phase in the presence of urea, whereas the typical aza-Michael addition is more prominent in presence of arylamine in the solution phase for 3-(2-formylcycloalkenyl)acrylic ester derivative substrates. The wide range of substrates and urea-promoted neat synthesis made our approach more significant in medical and also analytical science. Moreover, an isoquinoline alkaloid decumbenine B analogue has been synthesized by using our newly developed neat methodology. We have also investigated the photophysical properties of the synthesized fused dihydroisoquinoline derivatives. One of the synthesized molecules was used as a sensor for the selective detection of toxic picric acid. Therefore, the effective neat synthesis and molecular sensing applications of these compounds made our approach more exciting in the field of heterocyclic chemistry.

Benzo-fused BOPAM Fluorophores: Synthesis, Post-functionalization, Photophysical Properties, and Acid Sensing Applications.

A novel category of asymmetric boron chromophores with the attachment of two BF2 moieties denoted as BOPAM, has been successfully synthesized via a one-pot three-step reaction starting from N-phenylbenzothioamide. This synthetic route results in the production of [a] and [b]benzo-fused BOPAMs along with post-functionalization of the [a]benzo-fused BOPAMs. The photophysical properties of these compounds have been systematically investigated through steady-state absorption and fluorescence emission measurements in solvents at both ambient and cryogenic temperatures, as well as in the solid state. Computational methods have been employed to elucidate the emissive characteristics of the benzo-fused BOPAMs, revealing distinctive photophysical attributes, including solvent-dependent fluorescence intensity. Remarkably, certain BOPAM derivatives exhibit noteworthy photophysical phenomena, such as the induction of off-on fluorescence emission under specific solvent conditions and the manifestation of intermolecular charge transfer states in solid-state matrices. Through post-functionalization strategies involving the introduction of electron-donating groups onto the [a]benzo-fused BOPAM scaffold, an intramolecular charge transfer (ICT) pathway is activated, leading to substantial fluorescence quenching via non-radiative decay processes. Notably, one [a]benzo-fused BOPAM variant exhibits a pronounced fluorescence enhancement upon exposure to acidic conditions, thereby underscoring its potential utility in pH-sensing applications.

Rational Design and Biological Application of Hybrid Fluorophores.

Fluorophores are considered powerful tools for not only enabling the visualization of cell structures, substructures, and biological processes, but also making for the quantitative and qualitative measurement of various analytes in living systems. However, most fluorophores do not meet the diverse requirements for biological applications in terms of their photophysical and biological properties. Hybridization is an important strategy in molecular engineering that provides fluorophores with complementarity and multifunctionality. This review summarizes the basic strategies of hybridization with four classes of fluorophores, including xanthene, cyanine, coumarin, and BODIPY with a focus on their structure-property relationship (SPR) and biological applications. This review aims to provide rational hybrid ideas for expanding the reservoir of knowledge regarding fluorophores and promoting the development of newly produced fluorophores for applications in the field of life sciences.

Construction of Boron Difluoride Complexes with Asymmetric N,N'-Bidentate Ligands.

Boron difluoride (BF2) complexes with asymmetrical N,N'-bidentate ligands have received increasing attention due to their fascinating properties and broad applications. They are generally constructed in two steps: ligand formation, followed by boron complexation. This review focuses on categorizing these BF2 complexes based on the key synthetic strategies that have been applied in the ligand formation steps. The post-functionalization, properties and applications of different types of BF2 complexes are presented. Their challenges and opportunities are also discussed. This should help the future rational design and synthesis of BF2 complexes with intriguing properties and practical applications.

Post-Formation of Fused Pentagonal Structure on Fjord Region of Polyaromatic Hydrocarbons under Hydrothermal Conditions.

This study explores the synthesis of cyclopenta-fused polyaromatic hydrocarbons (CP-PAHs) via Pt-catalyzed cyclization in water, focusing on the formation of fused pentagonal rings within heavily fused PAH frameworks. Utilizing platinum catalysts at lower temperatures (200-260 °C) in water, led to the successful synthesis of singly cyclized CP-PAHs. The reaction conditions facilitated the mono-cyclization of substrates such as dibenzo[g,p]chrysene and its isomers, yielding the desired products while suppressing the formation of bis-cyclized compounds. The use of Fe2O3 as an additive in conjunction with PtO2 was effective to suppress hydrogenation of the substrates and products. The products exhibited a redshift in UV-visible absorption and photoluminescence bands due to a decrease in the HOMO-LUMO energy gap. These findings highlight the potential of Pt-catalyzed cyclization for the controlled synthesis of CP-PAHs, with implications for various applications in materials science.

Synthesis, Structures and Photophysical Properties of Asymmetric Fulvene-[b]-fused BODIPYs.

Herein, we developed a one-pot procedure to synthesize novel fulvene-[b]-fused BODIPYs from α-(2-alkynylphenyl)-pyrrole and acylpyrrole, using 5-exo cyclization as the key transformation. Compared to benzene-[b]-fused BODIPYs, although they have similar chemical compositions, their structures and properties significantly differ from each other, which can be attributed to the less aromaticity of the fulvene linker than benzene. Notably, fulvene-[b]-fused BODIPY 1 b exhibits helical-twisted core skeleton, intensified red-shifted absorption, and peak fluorescence. In addition, the pathway of this one-pot reaction and the mechanism of POCl3 mediated 5-exo cyclization have been proposed by a combining experimental and computational study.

Tetrazole and Oxadiazole Derivatives as Thermally Activated Delayed Fluorescence Emitters.

Organic light-emitting diodes (OLEDs) are promising lighting solutions for sustainability and energy efficiency. Incorporating thermally activated delayed fluorescence (TADF) molecules enables OLEDs to achieve internal quantum efficiency (IQE), in principle, up to 100 %; therefore, new classes of promising TADF emitters and modifications of existing ones are sought after. This study explores the TADF emission properties of six designed TADF emitters, examining their photophysical responses using experimental and theoretical methods. The design strategy involves creating six distinct types of a donor-acceptor (D-A) system, where tert-butylcarbazoles are used as donors, while the acceptor component incorporates three different functional groups: nitrile, tetrazole and oxadiazole, with varying electron-withdrawing character. Additionally, the donor-acceptor distance is adjusted using a phenylene spacer, and its influence on TADF functionality is examined. The clear dependency of an additional spacer, inhibiting TADF, could be revealed. Emitters with a direct donor-acceptor connection are demonstrated to exhibit TADF moderate emissive behavior. The analysis emphasizes the impact of charge transfer, singlet-triplet energy gaps (ΔEST), and other microscopic parameters on photophysical rates, permitting TADF. Among the emitters, TCz-CN shows optimal performance as a blue-green emitter with an 88 % photoluminescence quantum yield (PLQY) and fast rate of reversible intersystem crossing of 2×106 s-1 and 1×107 s-1, obtained from time-resolved photoluminescence (TRPL) experiment in PMMA matrix and quantum mechanical calculations, respectively. This comprehensive exploration identifies molecular bases of superior TADF emitters and provides insights for future designs, advancing the optimization of TADF properties in OLEDs.

Orthogonal Geometry Enhancing the Intersystem Crossing and Photosensitive Efficiency of Spiro Organoboron Compounds.

Based on the reported spiro organoboron compounds (PS1 and PS2 as potent 1O2 sensitizers), several new organoboron molecules (PS4-PS9) were constructed through structural modification, and their low-lying excited states and photophysical properties have been explored by density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations. The predicted effective intersystem crossing (ISC) processes arise from the S1→T2 transition for PS4-PS6 and the S1→T4 transition for PS1, and corresponding KISC rate constants reach the order of magnitude of 109 (s-1). The organoboron compounds with a (N, N) chelate acceptor are predicted to exhibit relatively higher ISC efficiency than those bearing a (N, O) acceptor, and the planar C3NBN ring and the orthogonal configuration between the donor and acceptor moieties are responsible for the ISC rate enhancement. Importantly, the geometric features of the lowest singlet excited state (S1) for these compounds play a decisive role in their photosensitive efficiency. The present results provide a basis for better understanding of the photosensitivity of these spiro organoboron compounds and the structural modification effect.

Theoretical investigation on regulating photophysical properties and proton transfer behavior by electronegativity for near-infrared emitting styryl dyes.

Our main focus is to explore the atomic electronegativity-dependent photoinduced behavior of styryl derivatives (HBO, HBS, and HBSe). The results of structural parameter calculation by the DFT method show that the intramolecular hydrogen bonds of normal and tautomer form are strengthened and weakened, respectively, in an excited state (S1), which is conducive to the excited intramolecular proton transfer (ESIPT) process. The enhancement of excited hydrogen bond is beneficial to the ESIPT process from the aspects of infrared vibration frequency (IR), Mulliken's charge analysis, and density gradient reduction (RDG). Additionally, by determining the bond energy with the band critical point (BCP) parameter, we found that the lower the electronegativity of the atom, the larger the hydrogen bond strength at the excited state and the more likely ESIPT reaction occurs. Meanwhile, the intramolecular H-bonds O-H…N in HBO, HBS, and HBSe are enhanced with the weakened electron-withdrawing capacity of the atom (from O to S and Se). Subsequently, frontier molecular orbital (FMOs) and charge density difference (CDD) analyses essentially revealed that electron redistribution induces the ESIPT process. Low atomic electronegativity exhibits the high chemical activity of the excited state. Furthermore, to demonstrate the electronegativity-dependent ESIPT behavior of the system, we built potential energy curves (PECs) and located the transition states (TS) of proton transfer processes.

Europium-based ß-hydroxyketone complexes: synthesis, optoelectronic, thermal and computational analyses.

Six red-light-emitting Eu(III) complexes having a ß-hydroxyketone as ligand and heterocyclic ring containing compounds as ancillary ligands were synthesized to explore their use in displays and optoelectronics. The coordinating behavior of complexes was determined by various techniques such as FTIR (Fourier transform infrared), 1H-NMR (Nuclear magnetic resonance), and 13C-NMR that establishes a bonding of ligand and ancillary ligand with the Eu(III) ion. Morphology and purity were investigated through XRD (X-ray diffraction), SEM (scanning electron microscopy) and EDS (energy-dispersive X-ray spectroscopy) analyses that suggest semicrystalline and pure complex formation. Thermal analysis of complexes by TGA/DTG (thermogravimetric/derivative thermogravimetric) indicates that complexes are stable upto 200 ºC temperature making them suitable for use in display devices. Analysis of the photophysical properties was carried out in both solid and solution states using PL (photoluminescence) studies, color parameters, J-O (Judd-Ofelt) analysis and bandgap. Most emissive transition (5D0 → 7F2) is responsible for the red emission in the complexes. The CIE (Commission International de I'Eclairage) coordinates of complexes also indicate the red emission on UV excitation. The bandgap which was obtained in the range of 2.54-3.02 eV reveals the semiconducting behavior of complexes. Values of J-O parameters and Ω2 in the complexes reflect asymmetric chemical environment around Eu (III) and less covalence and the Ω4 indicates that complexes are less rigid. Bandgap calculated through DFT (density function theory) for complexes is in range of 2.37-2.77 eV, and intensity parameters (J-O), energy transfer rates, and spherical coordinates were determined by LUMPAC software. The computational data are in good harmony with the experimental data. Further biological aspects of complexes were studied using antioxidant and antimicrobial studies.

Influence of Ancillary Ligand on the Photosensitization and Photophysical Properties of Red Luminescent Tri-fluorinated Β-diketonate Eu(III) Complexes.

Highly emissive ternary Eu(III) complexes were synthesized with a tri-fluorinated ß-diketone as principal ligand and heterocyclic aromatic compounds as ancillary ligands to assess their utility as an illuminating material for display devices and other optoelectronics. The general characterizations, regarding the coordinating facets of complexes were accomplished via various spectroscopic techniques. Thermal stability was investigated via TGA/DTA. Photophysical analysis was accomplished by PL studies, Band gap value, color parameters and J-O analysis. DFT calculations were performed adopting geometrically optimized structure of complexes. Superb thermal stability has been achieved in complexes, which decides their concrete candidature for display devices. The bright red luminescence of complexes is ascribed to 5D0 → 7F2 transition of Eu(III) ion. Colorimetric parameters unlocked the applicability of complexes as warm light source and J-O parameters adequately summarized the coordinating surrounding around the metal ion. Various radiative properties were also evaluated which suggested the prospective use of complexes in lasers and other optoelectronic devices. The band gap and Urbach band tail, procured from absorption spectra, revealed the semiconducting behavior of synthesized complexes. DFT studies rendered the energies of FMO and various other molecular parameters. It can be summarized from the photophysical and optical analysis of synthesized complexes that these complexes are virtuous luminescent materials and possess potentiality to be used in diverse domain of display devices.

Photo-Physical Characteristics of Janus Green B in Different Solvents and its Interaction Mechanism with Silver Nanoparticles.

This work explores the effects of solvent polarity on Janus Green B (JGB) photophysical properties. The Lippert-Mataga, Billot, and Ravi equations were utilized to calculate the singlet-state excited dipole moments (µe) and ground state dipole moments (µg) using absorption and fluorescence spectra analyses. The results showed an increase in the former, which is suggestive of electronic structural alterations upon excitation. Analysis of fluorescence quantum yield values revealed that JGB's environment had an impact on its emission characteristics; it was particularly sensitive to silver nanoparticles, suggesting possible interactions. While simulations of electron density, electrostatic potential, and energy gap (Eg) helped to understand the electronic structure of JGB, theoretical absorption spectra produced by Time Dependent Density Function Theory (TD-DFT) calculations offered insights into electronic transitions during absorption. To sum up, the present study contributes to our comprehension of the molecular behavior of JGB in various solvents by elucidating the intricate relationship among solvent polarity, molecular environment, and interactions with silver nanoparticles. Additionally, theoretical computations support the interpretation of experimental results.

Fluorescent Schiff Bases with Phenothiazine and Coumarin Moieties: Synthesis, Characterization, Photophysical, Electrochemical, Computational and Biological Studies.

We present the design and synthesis of four new schiff bases viz., two each of phenothiazine and coumarin derivatives. The structures were proposed based on FT-IR, 1H NMR, 13C NMR and mass spectral data. The photophysical, solvatochromic and electrochemical studies of all the compounds were carried out. Furthermore, theoretical studies such as density functional theory (DFT) were carried out to gain a better understanding of the compounds' intramolecular charge transfer properties and electronic structures. Good agreement was noticed between the HOMO-LUMO energy gap obtained from DFT studies and that calculated from absorption threshold wavelengths. All the compounds showed Stokes shifts in the range of 6345-11,405 cm-1. These findings showed that the new schiff bases could be considered as attractive candidates for use in the development of OLEDs, organic electrical devices and optoelectronic devices. Newly synthesized compounds were tested for biological activities. When compared to conventional standards, gallic acid and indomethacin, the schiff bases showed better antioxidant and antiinflammatory activities, respectively.

Synthesis, Crystal Structure, and Photophysical Properties of Bromothiophene-Functionalized BF2-Curcuminoid as a Versatile Building Block.

A novel bromothiophene-functionalized BF2-curcuminoid (BTC-BF2) is synthesized by Knoevenagel condensation reaction. The structure of BTC-BF2 is determined by 1H-nuclear magnetic resonance (1H NMR), 13C-nuclear magnetic resonance (13C NMR), and high-resolution mass spectrometry (HRMS). Moreover, a nearly coplanar single crystal structure is successfully obtained and form a mesh structure through intermolecular multiple C─H···F hydrogen bond interactions. As expected, as-prepared BTC-BF2 exhibits solvent-dependent photophysical properties in solvents with different polarity and an intense red solid-state fluorescence. Density functional theory calculations further verify the relationships between its intrinsic electronic features and the photophysical properties. For its potential application aspect, BTC-BF2 shows a certain ability to generate singlet oxygen under irradiation with 530 nm green light. Moreover, BTC-BF2 can be utilized as versatile building block to construct novel far-red or NIR BF2-curcuminoid complexes for widely biological applications.

I-III-VI Quantum Dots and Derivatives: Design, Synthesis, and Properties for Light-Emitting Diodes.

Quantum dots (QDs) are important frontier luminescent materials for future technology in flexible ultrahigh-definition display, optical information internet, and bioimaging due to their outstanding luminescence efficiency and high color purity. I-III-VI QDs and derivatives demonstrate characteristics of composition-dependent band gap, full visible light coverage, high efficiency, excellent stability, and nontoxicity, and hence are expected to be ideal candidates for environmentally friendly materials replacing traditional Cd and Pb-based QDs. In particular, their compositional flexibility is highly conducive to precise control energy band structure and microstructure. Furthermore, the quantum dot light-emitting diodes (QLEDs) exhibits superior prospects in monochrome display and white illumination. This review summarizes the recent progress of I-III-VI QDs and their application in LEDs. First, the luminescence mechanism is illustrated based on their electronic-band structural characteristics. Second, focusing on the latest progress of I-III-VI QDs, the preparation mechanism, and the regulation of photophysical properties, the corresponding application progress particularly in light-emitting diodes is summarized as well. Finally, we provide perspectives on the overall current status and challenges propose performance improvement strategies in promoting the evolution of QDs and QLEDs, indicating the future directions in this field.

Bromopyrene Symphony: Synthesis and Characterisation of Isomeric Derivatives at Non-K Region and Nodal Positions for Diverse Functionalisation Strategies.

Pyrene, a renowned aromatic hydrocarbon, continues to captivate researchers due to its versatile properties and potential applications across various scientific domains. Among its derivatives, bromopyrenes stand out for their significance in synthetic chemistry, materials science, and environmental studies. The strategic functionalisation of pyrene at non-K region and nodal positions is crucial for expanding its utility, allowing for diverse functionalisation strategies. Bromo-substituted precursors serve as vital intermediates in synthetic routes; however, the substitution pattern of bromoderivatives significantly impacts their subsequent functionalisation and properties, posing challenges in synthesis and purification. Understanding the distinct electronic structure of pyrene is pivotal, dictating the preferential electrophilic aromatic substitution reactions at specific positions. Despite the wealth of literature, contradictions and complexities persist in synthesising suitably substituted bromopyrenes due to the unpredictable nature of substitution reactions. Building upon historical precedents, this study provides a comprehensive overview of bromine introduction in pyrene derivatives, offering optimised synthesis conditions based on laboratory research. Specifically, the synthesis of mono-, di-, tri-, and tetrabromopyrene isomers at non-K positions (1-, 3-, 6-, 8-) and nodal positions (2-, 7-) is systematically explored. By elucidating efficient synthetic methodologies and reaction conditions, this research contributes to advancing the synthesis and functionalisation strategies of pyrene derivatives, unlocking new possibilities for their utilisation in various fields.

Palladium-Catalyzed Arylations towards 3,6-Diaryl-1,3a,6a-triazapentalenes and Evaluation of Their Fluorescence Properties.

Methyl 4-(1,3a,6a-triazapentalen-3-yl)benzoate (TAP1) shows interesting properties as a small molecule fluorophore. In the search for post-functionalization methods, palladium-catalyzed arylation reactions were demonstrated. Direct CH arylation reactions of TAP1 with various aryl halides resulted in 3,6-diaryltriazapentalenes TAP4, although mostly in poor yields. Bromination of TAP1 followed by Suzuki coupling, on the other hand, requires a more delicate procedure, but gave arylated products with the same regiochemistry (TAP4) in moderate to good yields. The structure of 6-phenyltriazapentalene TAP4a was confirmed by crystallographic analysis. In addition, the effect of the C6 arylation on the fluorescent properties of 3-aryl-1,3a,6a-triazapentalenes was studied in dichloromethane at room temperature and in 2-methyltetrahydrofuran at 77 K, while the photophysical properties of two saponified derivatives were measured in acetonitrile.