Evaluation of conventional IMRT and VMAT strategies for postmastectomy radiation therapy after immediate implant-based reconstruction using the new ESTRO-ACROP contouring guidelines.

This study evaluated the usability of conventional templates based on the new contour guidelines of the European Society of Radiation and Oncology and Advisory Committee in Radiation Oncology Practice (ESTRO-ACROP) for treatment plans of postmastectomy radiotherapy after immediate implant-based reconstruction. Intensity-modulated radiation therapy (IMRT) and volumetric modulated arc therapy (VMAT) plans generated with two different treatment planning systems (TPSs, Eclipse and Monaco) were examined. Six computed tomography scans of patients aged 35-54 years were retrospectively analysed who had undergone mastectomy and breast reconstruction using silicone implants after being diagnosed with left breast cancer. Six radiation oncologists participated in this study, and each of them contoured the target volume of one left breast using conventional contour (CTV-CONV) and new contour (CTV-ESTRO) methods. This study showed that compared with CTV-CONV, using CTV-ESTRO with objectives and cost functions similar to those of TPSs worsened the target volume coverage and increased the total number of monitor units. Considering the organs at risk, CTV-ESTRO tended to increase the mean dose delivered to the contralateral lung. It is concluded that the approach used for the new ESTRO-ACROP contour method cannot be applied in a manner similar to that for the conventional breast contour method, implying that the new ESTRO-ACROP contour method may require more time for improving plans for a given treatment.

CT radiomic predictors of local relapse after SBRT for lung oligometastases from colorectal cancer: a single institute pilot study.

OBJECTIVES: To assess the potential of radiomic features (RFs) extracted from simulation computed tomography (CT) images in discriminating local progression (LP) after stereotactic body radiotherapy (SBRT) in the management of lung oligometastases (LOM) from colorectal cancer (CRC). MATERIALS AND METHODS: Thirty-eight patients with 70 LOM treated with SBRT were analyzed. The largest LOM was considered as most representative for each patient and was manually delineated by two blinded radiation oncologists. In all, 141 RFs were extracted from both contours according to IBSI (International Biomarker Standardization Initiative) recommendations. Based on the agreement between the two observers, 134/141 RFs were found to be robust against delineation (intraclass correlation coefficient [ICC] > 0.80); independent RFs were then assessed by Spearman correlation coefficients. The association between RFs and LP was assessed with Mann-Whitney test and univariate logistic regression (ULR): the discriminative power of the most informative RF was quantified by receiver-operating characteristics (ROC) analysis through area under curve (AUC). RESULTS: In all, 15/38 patients presented LP. Median time to progression was 14.6 months (range 2.4-66 months); 5/141 RFs were significantly associated to LP at ULR analysis (p < 0.05); among them, 4 RFs were selected as robust and independent: Statistical_Variance (AUC = 0.75, p = 0.002), Statistical_Range (AUC = 0.72, p = 0.013), Grey Level Size Zone Matrix (GLSZM) _zoneSizeNonUniformity (AUC = 0.70, p = 0.022), Grey Level Dependence Zone Matrix (GLDZM) _zoneDistanceEntropy (AUC = 0.70, p = 0.026). Importantly, the RF with the best performance (Statisical_Variance) is simply representative of density heterogeneity within LOM. CONCLUSION: Four RFs extracted from planning CT were significantly associated with LP of LOM from CRC treated with SBRT. Results encourage further research on a larger population aiming to define a usable radiomic score combining the most predictive RFs and, possibly, additional clinical features.

Radiological imaging protection: a study on imaging dose used while planning computed tomography for external radiotherapy in Japan.

Previous studies have primarily focused on quality of imaging in radiotherapy planning computed tomography (RTCT), with few investigations on imaging doses. To our knowledge, this is the first study aimed to investigate the imaging dose in RTCT to determine baseline data for establishing national diagnostic reference levels (DRLs) in Japanese institutions. A survey questionnaire was sent to domestic RT institutions between 10 October and 16 December 2021. The questionnaire items were volume computed tomography dose index (CTDIvol), dose-length product (DLP), and acquisition parameters, including use of auto exposure image control (AEC) or image-improving reconstruction option (IIRO) for brain stereotactic irradiation (brain STI), head and neck (HN) intensity-modulated radiotherapy (IMRT), lung stereotactic body radiotherapy (lung SBRT), breast-conserving radiotherapy (breast RT), and prostate IMRT protocols. Details on the use of motion-management techniques for lung SBRT were collected. Consequently, we collected 328 responses. The 75th percentiles of CTDIvol were 92, 33, 86, 23, and 32 mGy and those of DLP were 2805, 1301, 2416, 930, and 1158 mGy·cm for brain STI, HN IMRT, lung SBRT, breast RT, and prostate IMRT, respectively. CTDIvol and DLP values in institutions that used AEC or IIRO were lower than those without use for almost all sites. The 75th percentiles of DLP in each treatment technique for lung SBRT were 2541, 2034, 2336, and 2730 mGy·cm for free breathing, breath holding, gating technique, and real-time tumor tracking technique, respectively. Our data will help in establishing DRLs for RTCT protocols, thus reducing imaging doses in Japan.

Bladder filling volume variation between the first and second day of planning computed tomography for prostate cancer radiation therapy and correlation with renal function.

AIM: During radiation therapy (RT) for prostate cancer, bladder filling helps exclude the organ from irradiation and reduces adverse effects. For RT planning, we performed computed tomography (CT) for 2 consecutive days to evaluate inter-day variations in organs such as the bladder. However, the patient factors that are associated with large intra-patient variations in bladder filling volume prior to RT are not known. METHODS: This was a retrospective study of 97 prostate cancer patients who underwent CT for 2 consecutive days for RT planning between March 2015 and March 2020 and with confirmed water intake volume before the scans. Patients consumed 500 ml of water immediately after urination and underwent CT 30 min after the start of water intake; CT was performed under similar conditions over 2 consecutive days. Patient information was collected from the medical records taken before CT. RESULTS: The median bladder filling volume was 102.8 cm3 (range: 31.7-774.0), and the median intra-patient bladder filling volume variation was 23.4 cm3 (range: 0.4-277.7). Univariate analysis revealed that the intra-patient variation was significantly larger in patients with an eGFR higher than the median (p = 0.003). No other factor showed correlations with the variation. As the larger bladder filling volume of the 2 consecutive days in patients increased (median 121.5 cm3 , range: 47.8-774.0), the intra-patient variation also increased. CONCLUSION: Patients with a higher eGFR show greater variation in bladder filling volume, and caution should be exercised when applying RT in these patients.

A Deep Unsupervised Learning Model for Artifact Correction of Pelvis Cone-Beam CT.

PURPOSE: In recent years, cone-beam computed tomography (CBCT) is increasingly used in adaptive radiation therapy (ART). However, compared with planning computed tomography (PCT), CBCT image has much more noise and imaging artifacts. Therefore, it is necessary to improve the image quality and HU accuracy of CBCT. In this study, we developed an unsupervised deep learning network (CycleGAN) model to calibrate CBCT images for the pelvis to extend potential clinical applications in CBCT-guided ART. METHODS: To train CycleGAN to generate synthetic PCT (sPCT), we used CBCT and PCT images as inputs from 49 patients with unpaired data. Additional deformed PCT (dPCT) images attained as CBCT after deformable registration are utilized as the ground truth before evaluation. The trained uncorrected CBCT images are converted into sPCT images, and the obtained sPCT images have the characteristics of PCT images while keeping the anatomical structure of CBCT images unchanged. To demonstrate the effectiveness of the proposed CycleGAN, we use additional nine independent patients for testing. RESULTS: We compared the sPCT with dPCT images as the ground truth. The average mean absolute error (MAE) of the whole image on testing data decreased from 49.96 ± 7.21HU to 14.6 ± 2.39HU, the average MAE of fat and muscle ROIs decreased from 60.23 ± 7.3HU to 16.94 ± 7.5HU, and from 53.16 ± 9.1HU to 13.03 ± 2.63HU respectively. CONCLUSION: We developed an unsupervised learning method to generate high-quality corrected CBCT images (sPCT). Through further evaluation and clinical implementation, it can replace CBCT in ART.

Analysis of dose using CBCT and synthetic CT during head and neck radiotherapy: A single centre feasibility study.

OBJECTIVES: The study aimed to assess the suitability of deformable image registration (DIR) software to generate synthetic CT (sCT) scans for dose verification during radiotherapy to the head and neck. Planning and synthetic CT dose volume histograms were compared to evaluate dosimetric changes during the treatment course. METHODS: Eligible patients had locally advanced (stage III, IVa and IVb) oropharyngeal cancer treated with primary radiotherapy. Weekly CBCT images were acquired post treatment at fractions 1, 6, 11, 16, 21 and 26 over a 30 fraction treatment course. Each CBCT was deformed with the planning CT to generate a sCT which was used to calculate the dose at that point in the treatment. A repeat planning CT2 was acquired at fraction 16 and deformed with the fraction 16 CBCT to compare differences between the calculations mid-treatment. RESULTS: 20 patients were evaluated generating 138 synthetic CT sets. The single fraction mean dose to PTV_HR between the synthetic and planning CT did not vary, although dose to 95% of PTV_HR was smaller at week 6 compared to planning (difference 2.0%, 95% CI (0.8 to 3.1), p = 0.0). There was no statistically significant difference in PRV_brainstem or PRV_spinal cord maximum dose, although greater variation using the sCT calculations was reported. The mean dose to structures based on the fraction 16 sCT and CT2 scans were similar. CONCLUSIONS: Synthetic CT provides comparable dose calculations to those of a repeat planning CT; however the limitations of DIR must be understood before it is applied within the clinical setting.

On the impact of smoothing and noise on robustness of CT and CBCT radiomics features for patients with head and neck cancers.

PURPOSE: We investigated the characteristics of radiomics features extracted from planning CT (pCT) and cone beam CT (CBCT) image datasets acquired for 18 oropharyngeal cancer patients treated with fractionated radiation therapy. Images were subjected to smoothing, sharpening, and noise to evaluate changes in features relative to baseline datasets. METHODS: Textural features were extracted from tumor volumes, contoured on pCT and CBCT images, according to the following eight different classes: intensity based histogram features (IBHF), gray level run length (GLRL), law's textural information (LAWS), discrete orthonormal stockwell transform (DOST), local binary pattern (LBP), two-dimensional wavelet transform (2DWT), Two dimensional Gabor filter (2DGF), and gray level co-occurrence matrix (GLCM). A total of 165 radiomics features were extracted. Images were post-processed prior to feature extraction using a Gaussian noise model with different signal-to-noise-ratios (SNR = 5, 10, 15, 20, 25, 35, 50, 75, 100, and 150). Gaussian filters with different cut off frequencies (varied discreetly from 0.0458 to 0.7321 cycles-mm-1 ) were applied to image datasets. Effect of noise and smoothing on each extracted feature was quantified using mean absolute percent change (MAPC) between the respective values on post-processed and baseline images. The Fisher method for combining Welch P-values was used for tests of significance. Three comparisons were investigated: (a) Baseline pCT versus modified pCT (with given filter applied); (b) Baseline CBCT versus modified CBCT, and (c) Baseline and modified pCT versus baseline and modified CBCT. RESULTS: Features extracted from CT and CBCT image datasets were robust to low-pass filtering (MAPC = 17.5%, pvalFisher¯ = 0.93 for CBCT and MAPC = 7.5%, pvalFisher¯ = 0.98 for pCT) and noise (MAPC = 27.1%, pvalFisher¯ =  0.89 for CBCT, and MAPC = 34.6%, pvalFisher¯ = 0.61 for pCT). Extracted features were significantly impacted (MAPC=187.7%, pvalFisher¯ < 0.0001 for CBCT, and MAPC = 180.6%, pvalFisher¯ < 0.01 for pCT) by LOG which is classified as a high-pass filter. Features most impacted by low pass filtering were LAWS (MAPC = 11.2%, pvalFisher¯ = 0.44), GLRL (MAPC = 9.7%, pvalFisher¯ = 0.70) and IBHF (MAPC = 21.7%, pvalFisher¯ = 0.83), for the pCT datasets, and LAWS (MAPC = 20.2%, pvalFisher¯ = 0.24), GLRL (MAPC = 14.5%, pvalFisher¯ = 0.44), and 2DGF (MAPC=16.3%, pvalFisher¯ = 0.52), for CBCT image datasets. For pCT datasets, features most impacted by noise were GLRL (MAPC = 29.7%, pvalFisher¯ = 0.06), LAWS (MAPC = 96.6%, pvalFisher¯ = 0.42), and GLCM (MAPC = 36.2%, pvalFisher¯ = 0.48), while the LBPF (MAPC = 5.2%, pvalFisher¯ = 0.99) was found to be relatively insensitive to noise. For CBCT datasets, GLRL (MAPC = 8.9%, pvalFisher¯ = 0.80) and LAWS (MAPC = 89.3%, pvalFisher¯ = 0.81) features were impacted by noise, while the LBPF (MAPC = 2.2%, pvalFisher¯ = 0.99) and DOST (MAPC = 13.7%, pvalFisher¯ = 0.98) features were noise insensitive. Apart from 15 features, no significant differences were observed for the remaining 150 textural features extracted from baseline pCT and CBCT image datasets (MAPC = 90.1%, pvalFisher¯ = 0.26). CONCLUSIONS: Radiomics features extracted from planning CT and daily CBCT image datasets for head/neck cancer patients were robust to low-power Gaussian noise and low-pass filtering, but were impacted by high-pass filtering. Textural features extracted from CBCT and pCT image datasets were similar, suggesting interchangeability of pCT and CBCT for investigating radiomics features as possible biomarkers for outcome.

Computer-assisted framework for machine-learning-based delineation of GTV regions on datasets of planning CT and PET/CT images.

We have proposed a computer-assisted framework for machine-learning-based delineation of gross tumor volumes (GTVs) following an optimum contour selection (OCS) method. The key idea of the proposed framework was to feed image features around GTV contours (determined based on the knowledge of radiation oncologists) into a machine-learning classifier during the training step, after which the classifier produces the 'degree of GTV' for each voxel in the testing step. Initial GTV regions were extracted using a support vector machine (SVM) that learned the image features inside and outside each tumor region (determined by radiation oncologists). The leave-one-out-by-patient test was employed for training and testing the steps of the proposed framework. The final GTV regions were determined using the OCS method that can be used to select a global optimum object contour based on multiple active delineations with a LSM around the GTV. The efficacy of the proposed framework was evaluated in 14 lung cancer cases [solid: 6, ground-glass opacity (GGO): 4, mixed GGO: 4] using the 3D Dice similarity coefficient (DSC), which denotes the degree of region similarity between the GTVs contoured by radiation oncologists and those determined using the proposed framework. The proposed framework achieved an average DSC of 0.777 for 14 cases, whereas the OCS-based framework produced an average DSC of 0.507. The average DSCs for GGO and mixed GGO were 0.763 and 0.701, respectively, obtained by the proposed framework. The proposed framework can be employed as a tool to assist radiation oncologists in delineating various GTV regions.

Impact of pixel-based machine-learning techniques on automated frameworks for delineation of gross tumor volume regions for stereotactic body radiation therapy.

The aim of this study was to investigate the impact of pixel-based machine learning (ML) techniques, i.e., fuzzy-c-means clustering method (FCM), and the artificial neural network (ANN) and support vector machine (SVM), on an automated framework for delineation of gross tumor volume (GTV) regions of lung cancer for stereotactic body radiation therapy. The morphological and metabolic features for GTV regions, which were determined based on the knowledge of radiation oncologists, were fed on a pixel-by-pixel basis into the respective FCM, ANN, and SVM ML techniques. Then, the ML techniques were incorporated into the automated delineation framework of GTVs followed by an optimum contour selection (OCS) method, which we proposed in a previous study. The three-ML-based frameworks were evaluated for 16 lung cancer cases (six solid, four ground glass opacity (GGO), six part-solid GGO) with the datasets of planning computed tomography (CT) and 18F-fluorodeoxyglucose (FDG) positron emission tomography (PET)/CT images using the three-dimensional Dice similarity coefficient (DSC). DSC denotes the degree of region similarity between the GTVs contoured by radiation oncologists and those estimated using the automated framework. The FCM-based framework achieved the highest DSCs of 0.79±0.06, whereas DSCs of the ANN-based and SVM-based frameworks were 0.76±0.14 and 0.73±0.14, respectively. The FCM-based framework provided the highest segmentation accuracy and precision without a learning process (lowest calculation cost). Therefore, the FCM-based framework can be useful for delineation of tumor regions in practical treatment planning.