Segment-Long-Spacing (SLS) and the Polymorphic Structures of Fibrillar Collagen.

The diverse and complex functions of collagen during the development of an organism are closely related to the polymorphism of its supramolecular structures in the extracellular matrix. SLS (segment-long-spacing) is one of the best understood alternative structures of collagen. SLS played an instrumental role in the original studies of collagen more than half a century ago that laid the foundation of nearly everything we know about collagen today. Despite being used mostly under in vitro conditions, the natural occurrence of SLS in tissues has also been reported. Here we will provide a brief overview of the major findings of the SLS and other structures of collagen based on a wealth of work published starting from the 1940s. We will discuss the factors that determine the stability and the structural specificity of the different molecular assemblies of collagen in light of the new studies using designed fibril forming collagen peptides. At the end of the chapter, we will summarize some recent discoveries of the alternative structures of collagen in tissues, especially those involved in pathogenic states. A revisit of SLS will likely inspire new understandings concerning the range of critical roles of fibrillar collagen in terms of its organizational diversity in the extracellular matrix.

Conventional rigid 2D substrates cause complex contractile signals in monolayers of human induced pluripotent stem cell-derived cardiomyocytes.

Human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CM) in monolayers interact mechanically via cell-cell and cell-substrate adhesion. Spatiotemporal features of contraction were analysed in hiPSC-CM monolayers (1) attached to glass or plastic (Young's modulus (E) >1 GPa), (2) detached (substrate-free) and (3) attached to a flexible collagen hydrogel (E = 22 kPa). The effects of isoprenaline on contraction were compared between rigid and flexible substrates. To clarify the underlying mechanisms, further gene expression and computational studies were performed. HiPSC-CM monolayers exhibited multiphasic contractile profiles on rigid surfaces in contrast to hydrogels, substrate-free cultures or single cells where only simple twitch-like time-courses were observed. Isoprenaline did not change the contraction profile on either surface, but its lusitropic and chronotropic effects were greater in hydrogel compared with glass. There was no significant difference between stiff and flexible substrates in regard to expression of the stress-activated genes NPPA and NPPB. A computational model of cell clusters demonstrated similar complex contractile interactions on stiff substrates as a consequence of cell-to-cell functional heterogeneity. Rigid biomaterial surfaces give rise to unphysiological, multiphasic contractions in hiPSC-CM monolayers. Flexible substrates are necessary for normal twitch-like contractility kinetics and interpretation of inotropic interventions. KEY POINTS: Spatiotemporal contractility analysis of human induced pluripotent stem cell-derived cardiomyocyte (hiPSC-CM) monolayers seeded on conventional, rigid surfaces (glass or plastic) revealed the presence of multiphasic contraction patterns across the monolayer with a high variability, despite action potentials recorded in the same areas being identical. These multiphasic patterns are not present in single cells, in detached monolayers or in monolayers seeded on soft substrates such as a hydrogel, where only 'twitch'-like transients are observed. HiPSC-CM monolayers that display a high percentage of regions with multiphasic contraction have significantly increased contractile duration and a decreased lusotropic drug response. There is no indication that the multiphasic contraction patterns are associated with significant activation of the stress-activated NPPA or NPPB signalling pathways. A computational model of cell clusters supports the biological findings that the rigid surface and the differential cell-substrate adhesion underly multiphasic contractile behaviour of hiPSC-CMs.

Bioengineered Collagens.

There is a great deal of interest in obtaining recombinant collagen as an alternative source of material for biomedical applications and as an approach for obtaining basic structural and biological information. However, application of recombinant technology to collagen presents challenges, most notably the need for post-translational hydroxylation of prolines for triple-helix stability. Full length recombinant human collagens have been successfully expressed in cell lines, yeast, and several plant systems, while collagen fragments have been expressed in E. coli. In addition, bacterial collagen-like proteins can be expressed in high yields in E. coli and easily manipulated to incorporate biologically active sequences from human collagens. These expression systems allow manipulation of biologically active sequences within collagen, which has furthered our understanding of the relationships between collagen sequences, structure and function. Here, recombinant studies on collagen interactions with cell receptors, extracellular matrix proteins, and matrix metalloproteinases are reviewed, and discussed in terms of their potential biomaterial and biomedical applications.

Biomimetic mineralization of recombinant collagen type I derived protein to obtain hybrid matrices for bone regeneration.

Understanding the mineralization mechanism of synthetic protein has recently aroused great interest especially in the development of advanced materials for bone regeneration. Herein, we propose the synthesis of composite materials through the mineralization of a recombinant collagen type I derived protein (RCP) enriched with RGD sequences in the presence of magnesium ions (Mg) to closer mimic bone composition. The role of both RCP and Mg ions in controlling the precipitation of the mineral phase is in depth evaluated. TEM and X-ray powder diffraction reveal the crystallization of nanocrystalline apatite (Ap) in all the evaluated conditions. However, Raman spectra point out also the precipitation of amorphous calcium phosphate (ACP). This amorphous phase is more evident when RCP and Mg are at work, indicating the synergistic role of both in stabilizing the amorphous precursor. In addition, hybrid matrices are prepared to tentatively address their effectiveness as scaffolds for bone tissue engineering. SEM and AFM imaging show an homogeneous mineral distribution on the RCP matrix mineralized in presence of Mg, which provides a surface roughness similar to that found in bone. Preliminary in vitro tests with pre-osteoblast cell line show good cell-material interaction on the matrices prepared in the presence of Mg. To the best of our knowledge this work represents the first attempt to mineralize recombinant collagen type I derived protein proving the simultaneous effect of the organic phase (RCP) and Mg on ACP stabilization. This study opens the possibility to engineer, through biomineralization process, advanced hybrid matrices for bone regeneration.

Production of recombinant human type I collagen homotrimers in CHO cells and their physicochemical and functional properties.

Collagen is the most abundant protein in human and mammalian structures and is a component of the mammalian extracellular matrix (ECM). Recombinant collagen is a suitable alternative to native collagen extracted from animal tissue for various biomaterials. However, due to the limitations of the expression system, most recombinant collagens are collagen fragments and lack triple helix structures. In this study, Chinese hamster ovary (CHO) cells were used to express the full-length human type I collagen α1 chain (rhCol1α1). Moreover, Endo180 affinity chromatography and pepsin were used to purify pepsin-soluble rhCol1α1 (PSC1). The amino acid composition of PSC1 was closer to that of native human type I collagen, and PSC1 contained 9.1 % hydroxyproline. Analysis of the CD spectra and molecular weight distribution results revealed that PSC1 forms a stable triple helix structure that is resistant to pepsin hydrolysis and has some tolerance to MMP1, MMP2 and MMP8 hydrolysis. Atomic force microscopy (AFM), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) revealed that PSC1 can self-assemble into fibers at a concentration of 1 mg/ml; moreover, PSC1 can promote the proliferation and migration of NIH 3T3 cells. In conclusion, our data suggest that PSC1 is a highly similar type of recombinant collagen that may have applications in biomaterials and other medical fields.

3D printing of recombinant collagen/chitosan methacrylate/nanoclay hydrogels loaded with Kartogenin nanoparticles for cartilage regeneration.

Cartilage defects are frequently caused by trauma, illness and degradation of the cartilage. If these defects are not sufficiently treated, the joints will degrade irreversibly, possibly resulting in disability. Articular cartilage lacks blood vessels and nerves and is unable to regenerate itself, so the repair of cartilage defects is extremely challenging in clinical treatment. Tissue engineering technology is an emerging technology in cartilage repair and cartilage regeneration. 3D-printed hydrogels show great potential in cartilage tissue engineering for the fabrication of 3D cell culture scaffolds to mimic extracellular matrix. In this study, we construct a 3D-printed hydrogel loaded with nanoparticles by electrostatic interaction and photo cross-linking for the regeneration of cartilage, which has adaptable and drug-continuous release behavior. A photopolymerizable bioink was prepared using recombinant collagen, chitosan, nanoclay Laponite-XLG and nanoparticles loaded with Kartogenin (KGN). This bioink was added with KGN, a small molecule drug that promotes cartilage differentiation, and as a result, the 3D-printed CF/CM/3%LAP/KGN scaffolds obtained by extrusion printing is expected to be used for cartilage repair. It was shown that the 3D-printed scaffolds had good cytocompatibility for human bone marrow mesenchymal stem cells (hBMSCs) and exhibited excellent antimicrobial properties, the continuous release of KGN in the scaffold induced the hBMSCs differentiation into chondrocytes, which significantly enhanced the expression of collagen II and glycosaminoglycan. In vivo studies have shown that implantation of KGN-loaded scaffolds into cartilage-injured tissues promoted cartilage tissue regeneration. This study demonstrated that 3D-printed CF/CM/3%LAP/KGN scaffolds can be used for cartilage repair, which is expected to lead to new healing opportunities for cartilage injury-based diseases.

Bone morphogenetic protein-2 loaded triple helix recombinant collagen-based hydrogels for enhancing bone defect healing.

The development of efficacious bone substitute biomaterials remains a major challenge for research and clinical surgical. Herein, we constructed triple helix recombinant collagen (THRC) -based hydrogels loading bone morphogenetic protein-2 (BMP-2) to stimulate bone regeneration in cranial defects. A series of in situ forming hydrogels, denoted as THRC-oxidized carboxymethylcellulose (OCMC)-N-succinyl-chitosan (NSC) hydrogels, was synthesized via a Schiff base reaction involving OCMC, THRC and NSC. The hydrogels underwent rapid formation under physiological pH and temperature conditions. The composite hydrogel exhibits a network structure characterized by uniform pores, the dimensions of which can be tuned by varying THRC concentrations. The THRC-OCMC-NSC and THRC-OCMC-NSC-BMP2 hydrogels display heightened mechanical strength, substantial biodegradability, and lower swelling properties. The THRC-OCMC-NSC hydrogels show exceptional biocompatibility and bioactivity, accelerating cell proliferation, adhesion, and differentiation. Magnetic resonance imaging, computed tomography and histological analysis of rat cranial defects models revealed that the THRC-OCMC-NSC-BMP2 hydrogels substantially promote new bone formation and expedite bone regeneration. The novel THRC-OCMC-NSC-BMP2 hydrogels emerge as promising candidates for bone substitutes, demonstrating substantial potential in bone repair and regeneration applications.

Self-Assembling Triple-Helix Recombinant Collagen Hydrogel Enriched with Tyrosine.

The self-assembly of collagen within the human body creates a complex 3D fibrous network, providing structural integrity and mechanical strength to connective tissues. Recombinant collagen plays a pivotal role in the realm of biomimetic natural collagen. However, almost all of the reported recombinant collagens lack the capability of self-assembly, severely hindering their application in tissue engineering and regenerative medicine. Herein, we have for the first time constructed a series of self-assembling tyrosine-rich triple helix recombinant collagens, mimicking the structure and functionality of natural collagen. The recombinant collagen consists of a central triple-helical domain characterized by the (Gly-Xaa-Yaa)n sequence, along with N-terminal and C-terminal domains featuring the GYY sequence. The introduction of GYY has a negligible impact on the stability of the triple-helical structure of recombinant collagen while simultaneously promoting its self-assembly into fibers. In the presence of [Ru(bpy)3]Cl2 and APS as catalysts, tyrosine residues in the recombinant collagen undergo covalent cross-linking, resulting in a hydrogel with exceptional mechanical properties. The recombinant collagen hydrogel exhibits outstanding biocompatibility and bioactivity, significantly enhancing the proliferation, adhesion, migration, and differentiation of HFF-1 cells. This innovative self-assembled triple-helix recombinant collagen demonstrates significant potential in the fields of tissue engineering and medical materials.

A highly bioactive THPC-crosslinked recombinant collagen hydrogel implant for aging skin rejuvenation.

Skin aging, a complex physiological progression marked by collagen degradation, poses substantial challenges in dermatology. Recombinant collagen emerges as a potential option for skin revitalization, yet its application is constrained by difficulties in forming hydrogels. We have for the first time developed a highly bioactive Tetrakis(hydroxymethyl) phosphonium chloride (THPC)-crosslinked recombinant collagen hydrogel implant for aging skin rejuvenation. THPC demonstrated superior crosslinking efficiency compared to traditional agents such as EDC/NHS and BDDE, achieving complete recombinant collagen crosslinking at minimal concentrations and effectively inducing hydrogel formation. THPC's four reactive hydroxymethyl groups facilitate robust crosslinking with triple helical recombinant collagen, producing hydrogels with enhanced mechanical strength, excellent injectability, increased stability, and greater durability. Moreover, the hydrogel exhibited remarkable biocompatibility and bioactivity, significantly promoting the proliferation, adhesion, and migration of human foreskin fibroblast-1. In photoaged mice skin models, the THPC-crosslinked collagen hydrogel implant notably improved dermal density, skin elasticity, and reduced transepidermal water loss, creating a conducive environment for fibroblast activity and healthy collagen regeneration. Additionally, it elevated superoxide dismutase (SOD) activity and displayed substantial anti-calcification properties. The THPC-crosslinked recombinant collagen hydrogel implant presents an innovative methodology in combating skin aging, offering significant promise in dermatology and tissue engineering.

Recombinant collagen for the repair of skin wounds and photo-aging damage.

The skin, being the body's primary defense mechanism, is susceptible to various injuries such as epidermal wounds, natural aging, and ultraviolet-induced damage. As a result, there is growing interest in researching skin repair methods. Traditional animal-derived collagen, widely available on the market, poses risks due to its immunogenicity and potential for viral contamination. In contrast, recombinant collagen sourced from human genes offers a safer alternative. To investigate the potential of human recombinant collagen in skin repair, our research team applied two types, type I human collagen (Col I) and CF-1552(I), to two different skin injury models: a wound-healing model and a photo-aging model. Our findings indicate that both Col I and CF-1552(I) effectively enhance wound healing and repair skin damaged by ultraviolet exposure. Notably, CF-1552(I) showed effects comparable to Col I in promoting cell proliferation in the wound-healing model and increasing malondialdehyde content in the photo-aging model, suggesting that CF-1552(I) may offer greater potential for skin repair compared to the larger Col I molecule.

Expression, characterization and antivascular activity of amino acid sequence repeating collagen hexadecapeptide.

Type V collagen is an essential component of the extracellular matrix (ECM), and its remodeling releases specific protein fragments that can specifically inhibit endothelial cell responses such as proliferation, migration, and invasion. In this study, we have successfully constructed two engineered strains of Pichia pastoris capable of producing recombinant collagen through a new genetic engineering approach. Through high-density fermentation, the expression of 1605 protein and 1610 protein could reach 2.72 g/L and 4.36 g/L. With the increase of repetition times, the yield also increased. Bioactivity analysis showed that recombinant collagen could block the angiogenic effect of FGF-2 on endothelial cells by eliminating FGF-2-induced endothelial cell migration and invasion. Collectively, the recombinant proteins we successfully expressed have a wide range of potential for inhibiting angiogenesis in the biomaterials and biomedical fields.

Status and developmental trends in recombinant collagen preparation technology.

Recombinant collagen is a pivotal topic in foundational biological research and epitomizes the application of critical bioengineering technologies. These technological advancements have profound implications across diverse areas such as regenerative medicine, organ replacement, tissue engineering, cosmetics and more. Thus, recombinant collagen and its preparation methodologies rooted in genetically engineered cells mark pivotal milestones in medical product research. This article provides a comprehensive overview of the current genetic engineering technologies and methods used in the production of recombinant collagen, as well as the conventional production process and quality control detection methods for this material. Furthermore, the discussion extends to foresee the strides in physical transfection and magnetic control sorting studies, envisioning an enhanced preparation of recombinant collagen-seeded cells to further fuel recombinant collagen production.

Chromatographic separation by RPLC-ESI-MS of all hydroxyproline isomers for the characterization of collagens from different sources.

During collagen biosynthesis, proline is post-translationally converted to hydroxyproline by specific enzymes. This amino acid, unique to collagen, plays a crucial role in stabilizing the collagen triple helix structure and could serve as an important biomarker for collagen content and quality analysis. Hydroxyproline has four isomers, depending on whether proline is hydroxylated at position 4 or 3 and on whether the cis- or trans- conformation is formed. Moreover, as extensive hydrolysis of collagen is required for its amino acid analysis, epimerization may also occur, although to a lesser extent, giving a total of eight possible isomers. The aim of the present study was to develop a reversed-phase high-performance liquid chromatography-UV-mass spectrometry (RPLC-UV-MS) method for the separation and quantification of all eight hydroxyproline isomers. After the chiral derivatization of the hydroxyproline isomers with Nα-(2,4-dinitro-5-fluorophenyl)-L-valinamide (L-FDVA), to enable their UV detection, the derivatized diastereoisomers were separated by testing different C18 column technologies and morphologies and optimizing operative conditions such as the mobile phase composition (solvent, additives), elution mode, flow rate and temperature. Baseline resolution of all eight isomers was achieved on a HALO® ES-C18 reversed-phase column (150×1.5 mm, 2.7 µm, 160 Å) using isocratic elution and MS-compatible mobile phase. The optimized method was validated for the quantification of hydroxyproline isomers and then applied to different collagen hydrolysates to gain insight and a deeper understanding of hydroxyproline abundances in different species (human, chicken) and sources (native, recombinant).

New Regenerative and Anti-Aging Medicine Approach Based on Single-Stranded Alpha-1 Collagen for Neo-Collagenesis Induction: Clinical and Instrumental Experience of a New Injective Polycomponent Formulation for Dermal Regeneration.

This study explores the efficacy of a novel polycomponent formulation (KARISMA Rh Collagen® FACE, Taumedika Srl, Rome, Italy), containing 200 mg/mL of non-crosslinked high-molecular-weight hyaluronic acid (HMW-HA), 200 µg/mL of a human recombinant polypeptide of collagen-1 alpha chain, and 40 mg/mL of carboxymethyl cellulose (CMC) as a regenerative medicine for skin regeneration and rejuvenation. This formulation combines non-crosslinked high-molecular-weight hyaluronic acid, human recombinant polypeptide of collagen-1 alpha chain, and carboxymethyl cellulose to stimulate collagen type I production and enhance skin hydration. This study involved 100 subjects with varying skin conditions, divided into three groups based on skin aging, smoking history, and facial scarring, to evaluate the product's effectiveness in skin regeneration and aesthetic improvement. The methodology included two injections of Karisma (2 mL for each injection) one month apart, with evaluations conducted using FACE-Q questionnaires, the SGAIS Questionnaire, and Antera 3D skin scanner measurements at baseline, 30 days, and 60 days post-treatment. The results demonstrated a significant reduction in skin roughness and an improvement in skin quality across all the groups, with no correlation between the outcomes and the patient's age. The subjective assessments also indicated high satisfaction with the treatment's aesthetic results. The analyzed data allow us to conclude that the single-stranded collagen with hyaluronic acid and carboxymethyl-cellulose formulation is able to stimulate the skin's regenerative response, yielding significant results both in vitro and, through our study, also in vivo. This new polycomponent formulation effectively stimulates skin regeneration, improving skin quality and texture, with significant aesthetic benefits perceived by patients, and a low incidence of adverse events, marking a promising advancement in regenerative medicine.

Biological Macromolecule Hydrogel Based on Recombinant Type I Collagen/Chitosan Scaffold to Accelerate Full-Thickness Healing of Skin Wounds.

The development of biological macromolecule hydrogel dressings with fatigue resistance, sufficient mechanical strength, and versatility in clinical treatment is critical for accelerating full-thickness healing of skin wounds. Therefore, in this study, multifunctional, biological macromolecule hydrogels based on a recombinant type I collagen/chitosan scaffold incorporated with a metal-polyphenol structure were fabricated to accelerate wound healing. The resulting biological macromolecule hydrogel possesses sufficient mechanical strength, fatigue resistance, and healing properties, including antibacterial, antioxygenic, self-healing, vascularization, hemostatic, and adhesive abilities. Chitosan and recombinant type I collagen formed the scaffold network, which was the first covalent crosslinking network of the hydrogel. The second physical crosslinking network comprised the coordination of a metal-polyphenol structure, i.e., Cu2+ with the catechol group of dopamine methacrylamide (DMA) and stacking of DMA benzene rings. Double-crosslinked networks are interspersed and intertwined in the hydrogel to reduce the mechanical strength and increase its fatigue resistance, making it more suitable for clinical applications. Moreover, the biological macromolecule hydrogel can continuously release Cu2+, which provides strong antibacterial and vascularization properties. An in vivo full-thickness skin defect model confirmed that multifunctional, biological macromolecule hydrogels based on a recombinant type I collagen/chitosan scaffold incorporated with a metal-polyphenol structure can facilitate the formation of granulation tissue and collagen deposition for a short period to promote wound healing. This study highlights that this biological macromolecule hydrogel is a promising acute wound-healing dressing for biomedical applications.

Injectable Antibacterial Hydrogel with Asiaticoside-Loaded Liposomes and Ultrafine Silver Nanosilver Particles Promotes Healing of Burn-Infected Wounds.

Post-injury infection and wound healing are recurrent daily life problems. Therefore, the necessity of developing a biomaterial with antibacterial and wound-healing properties is paramount. Based on the special porous structure of hydrogel, this work modifies recombinant collagen and quaternary ammonium chitosan and fused them with silver nanoparticles (Ag@mental-organic framework (Ag@MOF)) with antibacterial properties, and asiaticoside-loaded liposomes (Lip@AS) with anti-inflammatory/vascularization effects to form the rColMA/QCSG/LIP@AS/Ag@MOF (RQLAg) hydrogel. The prepared hydrogel possesses good sustainable release capabilities of Ag+ and AS and exhibits concentration-dependent swelling properties, pore size, and compressive strength. Cellular experiments show that the hydrogel exhibits good cell compatibility and promote cell migration, angiogenesis, and M1 macrophage polarization. Additionally, the hydrogels exhibit excellent antibacterial activity against Escherichia coli and Staphylococcus aureus in vitro. In vivo, Sprague Dawley rats burn-wound infection model showed that the RQLAg hydrogel could efficiently promote wound healing and has stronger healing promoting abilities than those of Aquacel Ag. In summary, the RQLAg hydrogel is expected to be an excellent material for accelerating open wound healing and preventing bacterial infections.

[Industrial development and biomedical application prospect of recombinant collagen].

Recombinant collagen, as an alternative to natural collagen, has the potential to be widely used in biomaterials, biomedicine, etc. Diverse recombinant collagens and their variants can be industrially produced in a variety of expression systems, which lays a foundation for exploring and expanding the clinical application of recombinant collagens. We reviewed different expression systems for recombinant collagens, such as prokaryotic expression systems, yeast expression systems, as well as plant, insect, mammal, and human cell expression systems, and introduced the advantages, potential applications, and limitations of recombinant collagen. In particularly, we focused on the current progress in the recombinant collagen production, including recombinant expression system construction and hydroxylation strategies of recombinant collagen, and summarized the current biomedical applications of recombinant collagen.

Bioprinted Gelatin-Recombinant Type III Collagen Hydrogel Promotes Wound Healing.

Artificial skins are biomaterials that can replace the lost skin or promote the regeneration of damaged skin. Skin regenerative biomaterials are highly applauded because they can exempt patients with severe burns from the painful procedure of autologous skin transplantation. Notwithstanding decades of research, biocompatible, degradable, and printable biomaterials that can effectively promote skin regeneration as a transplantation replacement in clinical use are still scarce. Here, we report one type of all-protein hydrogel material as the product of the enzymatic crosslinking reaction of gelatin and a recombinant type III collagen (rColIII) protein. Doping the rColIII protein in gelatin reduces the inflammatory response as an implant underneath the skin. The all-protein hydrogel can be bioprinted as scaffolds to support the growth and proliferation of 3T3 fibroblast cells. The hydrogel used as a wound dressing promotes wound healing in a rat model of skin damage, showing a faster and healthier recovery than the controls. The rColIII protein in the hydrogel has been shown to play a critical role in skin regeneration. Altogether, this work manifests the development of all-protein gelatin-rColIII hydrogel and demonstrates its use in wound healing. The gelatin-collagen hydrogel wound dressing thereby may become a promising treatment of severe wounds in the future.

Incorporation of Natural and Recombinant Collagen Proteins within Fmoc-Based Self-Assembling Peptide Hydrogels.

Hydrogel biomaterials mimic the natural extracellular matrix through their nanofibrous ultrastructure and composition and provide an appropriate environment for cell-matrix and cell-cell interactions within their polymeric network. Hydrogels can be modified with different proteins, cytokines, or cell-adhesion motifs to control cell behavior and cell differentiation. Collagens are desirable and versatile proteins for hydrogel modification due to their abundance in the vertebrate extracellular matrix and their interactions with cell-surface receptors. Here, we report a quick, inexpensive and effective protocol for incorporation of natural, synthetic and recombinant collagens into Fmoc-based self-assembling peptide hydrogels. The hydrogels are modified through a diffusion protocol in which collagen molecules of different molecular sizes are successfully incorporated and retained over time. Characterization studies show that these collagens interact with the hydrogel fibers without affecting the overall mechanical properties of the composite hydrogels. Furthermore, the collagen molecules incorporated into the hydrogels are still biologically active and provide sites for adhesion and spreading of human fibrosarcoma cells through interaction with the α2ß1 integrin. Our protocol can be used to incorporate different types of collagen molecules into peptide-based hydrogels without any prior chemical modification. These modified hydrogels could be used in studies where collagen-based substrates are required to differentiate and control the cell behavior. Our protocol can be easily adapted to the incorporation of other bioactive proteins and peptides into peptide-based hydrogels to modulate their characteristics and their interaction with different cell types.

A regulatory perspective on recombinant collagen-based medical devices.

As a class of novel biomaterials manufactured by synthetic biology technologies, recombinant collagens are candidates for a variety of medical applications. In this article, a regulatory scientific perspective on recombinant collagens and their medical devices is presented with a focus on the definition, translation, classification and technical review. Recombinant collagens are categorized as recombinant human collagen, recombinant humanized collagen and recombinant collagen-like protein, as differentiated by specific compositions and structures. Based on their intended uses and associated risks, recombinant collagen-based medical devices are generally classified as Class Ⅱ or Ⅲ in China. The regulatory review of recombinant collagen-based medical devices aims to assess their safety and efficacy demonstrated by scientific evidences generated from preclinical and clinical evaluations. Taken together, opportunities as well as challenges for their future clinical translation of recombinant collagen-based medical devices abound, which highlights the essential role of regulatory science to provide new tools, standards, guidelines and methods to evaluate the safety and efficacy of medical products.